/**************************************************************************//** * @file wwdt.h * @brief N9H30 WWDT driver header file * * @note * SPDX-License-Identifier: Apache-2.0 * Copyright (C) 2018 Nuvoton Technology Corp. All rights reserved. *****************************************************************************/ #ifndef __NU_WWDT_H__ #define __NU_WWDT_H__ #ifdef __cplusplus extern "C" { #endif #include "N9H30.h" /** @addtogroup N9H30_Device_Driver N9H30 Device Driver @{ */ /** @addtogroup N9H30_WWDT_Driver WWDT Driver @{ */ /** @addtogroup N9H30_WWDT_EXPORTED_CONSTANTS WWDT Exported Constants @{ */ #define WWDT_PRESCALER_1 (0UL << 8) ///< WWDT setting prescaler to 1 \hideinitializer #define WWDT_PRESCALER_2 (1UL << 8) ///< WWDT setting prescaler to 2 \hideinitializer #define WWDT_PRESCALER_4 (2UL << 8) ///< WWDT setting prescaler to 4 \hideinitializer #define WWDT_PRESCALER_8 (3UL << 8) ///< WWDT setting prescaler to 8 \hideinitializer #define WWDT_PRESCALER_16 (4UL << 8) ///< WWDT setting prescaler to 16 \hideinitializer #define WWDT_PRESCALER_32 (5UL << 8) ///< WWDT setting prescaler to 32 \hideinitializer #define WWDT_PRESCALER_64 (6UL << 8) ///< WWDT setting prescaler to 64 \hideinitializer #define WWDT_PRESCALER_128 (7UL << 8) ///< WWDT setting prescaler to 128 \hideinitializer #define WWDT_PRESCALER_192 (8UL << 8) ///< WWDT setting prescaler to 192 \hideinitializer #define WWDT_PRESCALER_256 (9UL << 8) ///< WWDT setting prescaler to 256 \hideinitializer #define WWDT_PRESCALER_384 (0xAUL << 8) ///< WWDT setting prescaler to 384 \hideinitializer #define WWDT_PRESCALER_512 (0xBUL << 8) ///< WWDT setting prescaler to 512 \hideinitializer #define WWDT_PRESCALER_768 (0xCUL << 8) ///< WWDT setting prescaler to 768 \hideinitializer #define WWDT_PRESCALER_1024 (0xDUL << 8) ///< WWDT setting prescaler to 1024 \hideinitializer #define WWDT_PRESCALER_1536 (0xEUL << 8) ///< WWDT setting prescaler to 1536 \hideinitializer #define WWDT_PRESCALER_2048 (0xFUL << 8) ///< WWDT setting prescaler to 2048 \hideinitializer #define WWDT_RELOAD_WORD (0x00005AA5) ///< Fill this value to RLD register to reload WWDT counter \hideinitializer /*@}*/ /* end of group N9H30_WWDT_EXPORTED_CONSTANTS */ /** @addtogroup N9H30_WWDT_EXPORTED_FUNCTIONS WWDT Exported Functions @{ */ /** * @brief This macro clear WWDT time-out reset system flag. * @return None * \hideinitializer */ #define WWDT_CLEAR_RESET_FLAG() outpw(REG_WWDT_STATUS, 0x2) /** * @brief This macro clear WWDT compare match interrupt flag. * @return None * \hideinitializer */ #define WWDT_CLEAR_INT_FLAG() outpw(REG_WWDT_STATUS, 0x1) /** * @brief This macro is use to get WWDT time-out reset system flag. * @return WWDT reset system or not * @retval 0 WWDT did not cause system reset * @retval 1 WWDT caused system reset * \hideinitializer */ #define WWDT_GET_RESET_FLAG() (inpw(REG_WWDT_STATUS) & 0x2 ? 1 : 0) /** * @brief This macro is used to indicate WWDT compare match interrupt flag. * @return WWDT compare match interrupt occurred or not * @retval 0 WWDT compare match interrupt did not occur * @retval 1 WWDT compare match interrupt occurred * \hideinitializer */ #define WWDT_GET_INT_FLAG() (inpw(REG_WWDT_STATUS) & 0x1 ? 1 : 0) /** * @brief This macro to reflects current WWDT counter value * @return Return current WWDT counter value * \hideinitializer */ #define WWDT_GET_COUNTER() inpw(REG_WWDT_CNT) /** * @brief This macro is used to reload the WWDT counter value to 0x3F. * @return None * @details After WWDT enabled, application must reload WWDT counter while * current counter is less than compare value and larger than 0, * otherwise WWDT will cause system reset. * \hideinitializer */ #define WWDT_RELOAD_COUNTER() outpw(REG_WWDT_RLDCNT, WWDT_RELOAD_WORD) void WWDT_Open(UINT u32PreScale, UINT u32CmpValue, UINT u32EnableInt); /*@}*/ /* end of group N9H30_WWDT_EXPORTED_FUNCTIONS */ /*@}*/ /* end of group N9H30_WWDT_Driver */ /*@}*/ /* end of group N9H30_Device_Driver */ #ifdef __cplusplus } #endif #endif //__NU_WWDT_H__ /*** (C) COPYRIGHT 2018 Nuvoton Technology Corp. ***/