/******************************************************************************
*Copyright(C)2018, Huada Semiconductor Co.,Ltd All rights reserved.
*
* This software is owned and published by:
* Huada Semiconductor Co.,Ltd("HDSC").
*
* BY DOWNLOADING, INSTALLING OR USING THIS SOFTWARE, YOU AGREE TO BE BOUND
* BY ALL THE TERMS AND CONDITIONS OF THIS AGREEMENT.
*
* This software contains source code for use with HDSC
* components. This software is licensed by HDSC to be adapted only
* for use in systems utilizing HDSC components. HDSC shall not be
* responsible for misuse or illegal use of this software for devices not
* supported herein. HDSC is providing this software "AS IS" and will
* not be responsible for issues arising from incorrect user implementation
* of the software.
*
* Disclaimer:
* HDSC MAKES NO WARRANTY, EXPRESS OR IMPLIED, ARISING BY LAW OR OTHERWISE,
* REGARDING THE SOFTWARE (INCLUDING ANY ACOOMPANYING WRITTEN MATERIALS),
* ITS PERFORMANCE OR SUITABILITY FOR YOUR INTENDED USE, INCLUDING,
* WITHOUT LIMITATION, THE IMPLIED WARRANTY OF MERCHANTABILITY, THE IMPLIED
* WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR USE, AND THE IMPLIED
* WARRANTY OF NONINFRINGEMENT.
* HDSC SHALL HAVE NO LIABILITY (WHETHER IN CONTRACT, WARRANTY, TORT,
* NEGLIGENCE OR OTHERWISE) FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT
* LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION,
* LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS) ARISING FROM USE OR
* INABILITY TO USE THE SOFTWARE, INCLUDING, WITHOUT LIMITATION, ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OR LOSS OF DATA,
* SAVINGS OR PROFITS,
* EVEN IF Disclaimer HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
* YOU ASSUME ALL RESPONSIBILITIES FOR SELECTION OF THE SOFTWARE TO ACHIEVE YOUR
* INTENDED RESULTS, AND FOR THE INSTALLATION OF, USE OF, AND RESULTS OBTAINED
* FROM, THE SOFTWARE.
*
* This software may be replicated in part or whole for the licensed use,
* with the restriction that this Disclaimer and Copyright notice must be
* included with each copy of this software, whether used in part or whole,
* at all times.
*/

/** \file timer3.c
 **
 ** Common API of base timer.
 ** @link Tiemr3 Group Some description @endlink
 **
 **   - 2019-04-18  Husj  First Version
 **
 ******************************************************************************/

/*******************************************************************************
 * Include files
 ******************************************************************************/
#include "hc32l196_timer3.h"
/**
 *******************************************************************************
 ** \addtogroup Tim3Group
 ******************************************************************************/
//@{

/*******************************************************************************
 * Local pre-processor symbols/macros ('#define')
 ******************************************************************************/


/*******************************************************************************
 * Global variable definitions (declared in header file with 'extern')
 ******************************************************************************/

/*******************************************************************************
 * Local type definitions ('typedef')
 ******************************************************************************/

/*******************************************************************************
 * Local variable definitions ('static')
 ******************************************************************************/


/*******************************************************************************
 * Local function prototypes ('static')
 ******************************************************************************/


/*******************************************************************************
 * Function implementation - global ('extern') and local ('static')
 ******************************************************************************/

/**
 *****************************************************************************
 ** \brief Timer3 中断标志获取(模式0/1/23)
 **
 **
 ** \param [in]  enTim3Irq           中断类型
 ** 
 ** \retval TRUE or FALSE                                      
 *****************************************************************************/
boolean_t Tim3_GetIntFlag(en_tim3_irq_type_t enTim3Irq)
{
    boolean_t bRetVal = FALSE;
    uint32_t u32Val;
        
    u32Val = M0P_TIM3_MODE23->IFR;
    bRetVal = (u32Val>>enTim3Irq) & 0x1;

    return bRetVal;
}

/**
 *****************************************************************************
 ** \brief Timer3 中断标志清除(模式0/1/23)
 **
 **
 ** \param [in]  enTim3Irq           中断类型
 ** 
 ** \retval Ok or Error                                      
 *****************************************************************************/
en_result_t Tim3_ClearIntFlag(en_tim3_irq_type_t enTim3Irq)
{
    en_result_t enResult = Ok;
        
    M0P_TIM3_MODE23->ICLR = ~(1u<<enTim3Irq);
    
    return enResult;
}

/**
 *****************************************************************************
 ** \brief Timer3 中断所有标志清除(模式23)
 **
 **
 ** 
 ** 
 ** \retval Ok or Error                                      
 *****************************************************************************/
en_result_t Tim3_ClearAllIntFlag(void)
{
    en_result_t enResult = Ok;
    
    M0P_TIM3_MODE23->ICLR = 0;
    
    return enResult;
}

/**
 *****************************************************************************
 ** \brief Timer3 中断使能(模式0)
 **
 **
 ** \param [in]  none
 ** 
 ** \retval Ok or Error                                      
 *****************************************************************************/
en_result_t Tim3_Mode0_EnableIrq(void)
{
    en_result_t enResult = Ok;
    
    M0P_TIM3_MODE0->M0CR_f.UIE = TRUE;

    return enResult;
}

/**
 *****************************************************************************
 ** \brief Timer3 中断禁止(模式0)
 **
 **
 ** \param [in]  none
 ** 
 ** \retval Ok or Error                                      
 *****************************************************************************/
en_result_t Tim3_Mode0_DisableIrq(void)
{
    en_result_t enResult = Ok;
    
    M0P_TIM3_MODE0->M0CR_f.UIE = FALSE;

    return enResult;
}

/**
 *****************************************************************************
 ** \brief Timer3 中断使能(模式1)
 **
 **
 ** \param [in]  enTim3Irq           中断类型
 ** 
 ** \retval Ok or Error                                      
 *****************************************************************************/
en_result_t Tim3_Mode1_EnableIrq (en_tim3_irq_type_t enTim3Irq)
{
    en_result_t enResult = Ok;
    
        
    switch (enTim3Irq)
    {
        case Tim3UevIrq:
            M0P_TIM3_MODE1->M1CR_f.UIE = TRUE;
            break;
        case Tim3CA0Irq:
            M0P_TIM3_MODE1->CR0_f.CIEA = TRUE;
            break;
        default:
            enResult = Error;
            break;
    }
    
    return enResult;
}

/**
 *****************************************************************************
 ** \brief Timer3 中断禁止(模式1)
 **
 **
 ** \param [in]  enTim3Irq           中断类型
 ** 
 ** \retval Ok or Error                                      
 *****************************************************************************/
en_result_t Tim3_Mode1_DisableIrq (en_tim3_irq_type_t enTim3Irq)
{
    en_result_t enResult = Ok;
    
        
    switch (enTim3Irq)
    {
        case Tim3UevIrq:
            M0P_TIM3_MODE1->M1CR_f.UIE = FALSE;
            break;
        case Tim3CA0Irq:
            M0P_TIM3_MODE1->CR0_f.CIEA = FALSE;
            break;
        default:
            enResult = Error;
            break;
    }
    
    return enResult;
}

/**
 *****************************************************************************
 ** \brief Timer3 中断使能(模式23)
 **
 **
 ** \param [in]  enTim3Irq           中断类型
 ** 
 ** \retval Ok or Error                                      
 *****************************************************************************/
en_result_t Tim3_Mode23_EnableIrq (en_tim3_irq_type_t enTim3Irq)
{
    en_result_t enResult = Ok;
    
        
    switch (enTim3Irq)
    {
        case Tim3UevIrq:
            M0P_TIM3_MODE23->M23CR_f.UIE = TRUE;
            break;
        case Tim3CA0Irq:
            M0P_TIM3_MODE23->CRCH0_f.CIEA = TRUE;
            break;
        case Tim3CB0Irq:
            M0P_TIM3_MODE23->CRCH0_f.CIEB = TRUE;
            break;
        case Tim3CA1Irq:
            M0P_TIM3_MODE23->CRCH1_f.CIEA = TRUE;
            break;
        case Tim3CB1Irq:
            M0P_TIM3_MODE23->CRCH1_f.CIEB = TRUE;
            break;
        case Tim3CA2Irq:
            M0P_TIM3_MODE23->CRCH2_f.CIEA = TRUE;
            break;
        case Tim3CB2Irq:
            M0P_TIM3_MODE23->CRCH2_f.CIEB = TRUE;
            break;
        case Tim3BkIrq:
            M0P_TIM3_MODE23->M23CR_f.BIE = TRUE;
            break;
        case Tim3TrigIrq:
            M0P_TIM3_MODE23->M23CR_f.TIE = TRUE;
            break;
        default:
            enResult = Error;
            break;
    }
    
    return enResult;
}

/**
 *****************************************************************************
 ** \brief Timer3 中断禁止(模式23)
 **
 **
 ** \param [in]  enTim3Irq           中断类型
 ** 
 ** \retval Ok or Error                                      
 *****************************************************************************/
en_result_t Tim3_Mode23_DisableIrq (en_tim3_irq_type_t enTim3Irq)
{
    en_result_t enResult = Ok;
    
        
    switch (enTim3Irq)
    {
        case Tim3UevIrq:
            M0P_TIM3_MODE23->M23CR_f.UIE = FALSE;
            break;
        case Tim3CA0Irq:
            M0P_TIM3_MODE23->CRCH0_f.CIEA = FALSE;
            break;
        case Tim3CB0Irq:
            M0P_TIM3_MODE23->CRCH0_f.CIEB = FALSE;
            break;
        case Tim3CA1Irq:
            M0P_TIM3_MODE23->CRCH1_f.CIEA = FALSE;
            break;
        case Tim3CB1Irq:
            M0P_TIM3_MODE23->CRCH1_f.CIEB = FALSE;
            break;
        case Tim3CA2Irq:
            M0P_TIM3_MODE23->CRCH2_f.CIEA = FALSE;
            break;
        case Tim3CB2Irq:
            M0P_TIM3_MODE23->CRCH2_f.CIEB = FALSE;
            break;
        case Tim3BkIrq:
            M0P_TIM3_MODE23->M23CR_f.BIE = FALSE;
            break;
        case Tim3TrigIrq:
            M0P_TIM3_MODE23->M23CR_f.TIE = FALSE;
            break;
        default:
            enResult = Error;
            break;
    }
    
    return enResult;
}

/**
 *****************************************************************************
 ** \brief Timer3 初始化配置(模式0)
 **
 **
 ** \param [in]  pstcCfg       初始化配置结构体指针
 ** 
 ** \retval Ok or Error                                      
 *****************************************************************************/
en_result_t Tim3_Mode0_Init(stc_tim3_mode0_cfg_t* pstcCfg)
{
    en_result_t enResult = Ok;
  
    M0P_TIM3_MODE0->M0CR_f.MODE   = pstcCfg->enWorkMode;
    M0P_TIM3_MODE0->M0CR_f.GATEP  = pstcCfg->enGateP;
    M0P_TIM3_MODE0->M0CR_f.GATE   = pstcCfg->bEnGate;
    M0P_TIM3_MODE0->M0CR_f.PRS    = pstcCfg->enPRS;
    M0P_TIM3_MODE0->M0CR_f.TOGEN  = pstcCfg->bEnTog;
    M0P_TIM3_MODE0->M0CR_f.CT     = pstcCfg->enCT;
    M0P_TIM3_MODE0->M0CR_f.MD     = pstcCfg->enCntMode; 
    
    return enResult;
}

/**
 *****************************************************************************
 ** \brief Timer3 启动运行(模式0)
 **
 **
 ** \param [in]  none
 ** 
 ** \retval Ok or Error                                      
 *****************************************************************************/
en_result_t Tim3_M0_Run(void)
{
    en_result_t enResult = Ok;
    
    M0P_TIM3_MODE0->M0CR_f.CTEN = TRUE;
    
    return enResult;    
}

/**
 *****************************************************************************
 ** \brief Timer3 停止运行(模式0)
 **
 **
 ** \param [in]  none
 ** 
 ** \retval Ok or Error                                      
 *****************************************************************************/
en_result_t Tim3_M0_Stop(void)
{
    en_result_t enResult = Ok;
    
    M0P_TIM3_MODE0->M0CR_f.CTEN = FALSE;
    
    return enResult;  
}

/**
 *****************************************************************************
 ** \brief Timer3 端口输出使能/禁止设定(模式0)
 **
 **
 ** \param [in]  bEnOutput          翻转输出设定 TRUE:使能, FALSE:禁止
 ** 
 ** \retval Ok or Error                                      
 *****************************************************************************/
en_result_t Tim3_M0_Enable_Output(boolean_t bEnOutput)
{
    en_result_t enResult = Ok;
    

    M0P_TIM3_MODE0->DTR_f.MOE = bEnOutput;
    
    return enResult;    
}

/**
 *****************************************************************************
 ** \brief Timer3 翻转使能/禁止（低电平）设定(模式0)
 **
 **
 ** \param [in]  bEnTOG          翻转输出设定 TRUE:使能, FALSE:禁止
 ** 
 ** \retval Ok or Error                                      
 *****************************************************************************/
en_result_t Tim3_M0_EnTOG(boolean_t bEnTOG)
{
    en_result_t enResult = Ok;
    
    M0P_TIM3_MODE0->M0CR_f.TOGEN = bEnTOG;
    
    return enResult;  
}

/**
 *****************************************************************************
 ** \brief Timer3 16位计数器初值设置(模式0)
 **
 **
 ** \param [in]  u16Data          CNT 16位初值
 ** 
 ** \retval Ok or Error                                      
 *****************************************************************************/
en_result_t Tim3_M0_Cnt16Set(uint16_t u16Data)
{
    en_result_t enResult = Ok;
        
    M0P_TIM3_MODE0->CNT_f.CNT = u16Data;
 
    return enResult; 
}

/**
 *****************************************************************************
 ** \brief Timer3 16位计数值获取(模式0)
 **
 **
 ** \param [in]  none
 ** 
 ** \retval 16bits计数值                                      
 *****************************************************************************/
uint16_t Tim3_M0_Cnt16Get(void)
{
    uint16_t    u16CntData = 0;
      
    u16CntData = M0P_TIM3_MODE0->CNT_f.CNT;
    
    return u16CntData; 
}

/**
 *****************************************************************************
 ** \brief Timer3 重载值设置(模式0)
 **
 **
 ** \param [in]  u16Data          16bits重载值
 ** 
 ** \retval Ok or Error                                      
 *****************************************************************************/
en_result_t Tim3_M0_ARRSet(uint16_t u16Data)
{
    en_result_t enResult = Ok;
        
    M0P_TIM3_MODE0->ARR_f.ARR = u16Data;

    return enResult; 
}

/**
 *****************************************************************************
 ** \brief Timer3 32位计数器初值设置(模式0)
 **
 **
 ** \param [in]  u32Data          32位初值
 ** 
 ** \retval Ok or Error                                      
 *****************************************************************************/
en_result_t Tim3_M0_Cnt32Set(uint32_t u32Data)
{
    en_result_t enResult = Ok;
    
    M0P_TIM3_MODE0->CNT32_f.CNT32 = u32Data;
    
    return enResult; 
}

/**
 *****************************************************************************
 ** \brief Timer3 32位计数值获取(模式0)
 **
 **
 ** \param [in]  none
 ** 
 ** \retval 32bits计数值                                      
 *****************************************************************************/
uint32_t Tim3_M0_Cnt32Get(void)
{
    uint32_t    u32CntData = 0;
    
    u32CntData = M0P_TIM3_MODE0->CNT32_f.CNT32;
    
    return u32CntData;
}

/**
 *****************************************************************************
 ** \brief Timer3 初始化配置(模式1)
 **
 **
 ** \param [in]  pstcCfg       初始化配置结构体指针
 ** 
 ** \retval Ok or Error                                      
 *****************************************************************************/
en_result_t Tim3_Mode1_Init(stc_tim3_mode1_cfg_t* pstcCfg)
{
    en_result_t enResult = Ok;
  
    M0P_TIM3_MODE1->M1CR_f.MODE    = pstcCfg->enWorkMode;
    M0P_TIM3_MODE1->M1CR_f.PRS     = pstcCfg->enPRS;
    M0P_TIM3_MODE1->M1CR_f.CT      = pstcCfg->enCT;
    M0P_TIM3_MODE1->M1CR_f.ONESHOT = pstcCfg->enOneShot;
    
    return enResult;
}

/**
 *****************************************************************************
 ** \brief Timer3 PWC 输入配置(模式1)
 **
 **
 ** \param [in]  pstcCfg       初始化配置结构体指针
 ** 
 ** \retval Ok or Error                                      
 *****************************************************************************/
en_result_t Tim3_M1_Input_Cfg(stc_tim3_pwc_input_cfg_t* pstcCfg)
{
    en_result_t enResult = Ok;
    
    M0P_TIM3_MODE1->MSCR_f.TS    = pstcCfg->enTsSel;
    M0P_TIM3_MODE1->MSCR_f.IA0S  = pstcCfg->enIA0Sel;
    M0P_TIM3_MODE1->MSCR_f.IB0S  = pstcCfg->enIB0Sel;
    M0P_TIM3_MODE1->FLTR_f.ETP   = pstcCfg->enETRPhase;
    M0P_TIM3_MODE1->FLTR_f.FLTET = pstcCfg->enFltETR;
    M0P_TIM3_MODE1->FLTR_f.FLTA0 = pstcCfg->enFltIA0;
    M0P_TIM3_MODE1->FLTR_f.FLTB0 = pstcCfg->enFltIB0;
    
    return enResult;
}

/**
 *****************************************************************************
 ** \brief Timer3 PWC测量边沿起始结束选择(模式1)
 **
 **
 ** \param [in]  enEdgeSel           pwc测量起始终止电平
 ** 
 ** \retval Ok or Error                                      
 *****************************************************************************/
en_result_t Tim3_M1_PWC_Edge_Sel(en_tim3_m1cr_Edge_t enEdgeSel)
{
    en_result_t enResult = Ok;
        
    switch (enEdgeSel)
    {
        case 0:                                 ///< 上升沿到上升沿(周期)
            M0P_TIM3_MODE1->M1CR_f.EDG1ST = 0;  //上升沿
            M0P_TIM3_MODE1->M1CR_f.EDG2ND = 0;  //上升沿
            break;
        case 1:                                 ///< 下降沿到上升沿(低电平)
            M0P_TIM3_MODE1->M1CR_f.EDG1ST = 1;  //下降沿
            M0P_TIM3_MODE1->M1CR_f.EDG2ND = 0;  //上升沿
            break;
        case 2:                                 ///< 上升沿到下降沿(高电平)
            M0P_TIM3_MODE1->M1CR_f.EDG1ST = 0;  //上升沿
            M0P_TIM3_MODE1->M1CR_f.EDG2ND = 1;  //下降沿
            break;
        case 3:                                 ///< 下降沿到下降沿(周期)
            M0P_TIM3_MODE1->M1CR_f.EDG1ST = 1;  //下降沿
            M0P_TIM3_MODE1->M1CR_f.EDG2ND = 1;  //下降沿
            break;
        default:
            ;
            break;       
    }
    
    return enResult;    
}

/**
 *****************************************************************************
 ** \brief Timer3 启动运行(模式1)
 **
 **
 ** \param [in]  none
 ** 
 ** \retval Ok or Error                                      
 *****************************************************************************/
en_result_t Tim3_M1_Run(void)
{
    en_result_t enResult = Ok;
        
    M0P_TIM3_MODE1->M1CR_f.CTEN = TRUE;
    
    return enResult;    
}

/**
 *****************************************************************************
 ** \brief Timer3 停止运行(模式1)
 **
 **
 ** \param [in]  none
 ** 
 ** \retval Ok or Error                                      
 *****************************************************************************/
en_result_t Tim3_M1_Stop(void)
{
    en_result_t enResult = Ok;
        
    M0P_TIM3_MODE1->M1CR_f.CTEN = FALSE;
    
    return enResult;  
}

/**
 *****************************************************************************
 ** \brief Timer3 16位计数器初值设置(模式1)
 **
 **
 ** \param [in]  u16Data          16位初值
 ** 
 ** \retval Ok or Error                                      
 *****************************************************************************/
en_result_t Tim3_M1_Cnt16Set(uint16_t u16Data)
{
    en_result_t enResult = Ok;
  
    M0P_TIM3_MODE1->CNT_f.CNT = u16Data;
    
    return enResult; 
}

/**
 *****************************************************************************
 ** \brief Timer3 16位计数值获取(模式1)
 **
 **
 ** \param [in]  none
 ** 
 ** \retval 16bits计数值                                      
 *****************************************************************************/
uint16_t Tim3_M1_Cnt16Get(void)
{
    uint16_t    u16CntData = 0;
  
    u16CntData = M0P_TIM3_MODE1->CNT_f.CNT;
        
    return u16CntData; 
}

/**
 *****************************************************************************
 ** \brief Timer3 脉冲宽度测量结果数值获取(模式1)
 **
 **
 ** \param [in]  none
 ** 
 ** \retval 16bits脉冲宽度测量结果                                      
 *****************************************************************************/
uint16_t Tim3_M1_PWC_CapValueGet(void)
{
    uint16_t    u16CapData = 0;
  
    u16CapData = M0P_TIM3_MODE1->CCR0A_f.CCR0A;
        
    return u16CapData; 
}

/**
 *****************************************************************************
 ** \brief Timer3 初始化配置(模式23)
 **
 **
 ** \param [in]  pstcCfg       初始化配置结构体指针
 ** 
 ** \retval Ok or Error                                      
 *****************************************************************************/
en_result_t Tim3_Mode23_Init(stc_tim3_mode23_cfg_t* pstcCfg)
{
    en_result_t enResult = Ok;
  
    M0P_TIM3_MODE23->M23CR_f.MODE    = pstcCfg->enWorkMode;
    
    M0P_TIM3_MODE23->M23CR_f.PRS     = pstcCfg->enPRS;
    M0P_TIM3_MODE23->M23CR_f.CT      = pstcCfg->enCT;
    M0P_TIM3_MODE23->M23CR_f.COMP    = pstcCfg->enPWMTypeSel;
    M0P_TIM3_MODE23->M23CR_f.PWM2S   = pstcCfg->enPWM2sSel;
    M0P_TIM3_MODE23->M23CR_f.ONESHOT = pstcCfg->bOneShot;
    M0P_TIM3_MODE23->M23CR_f.URS     = pstcCfg->bURSSel;
    M0P_TIM3_MODE23->M23CR_f.DIR     = pstcCfg->enCntDir;
        
    return enResult;
}

/**
 *****************************************************************************
 ** \brief Timer3 PWM输出使能(模式23)
 **
 **
 ** \param [in]  bEnOutput          PWM输出使能/禁止设定
 ** \param [in]  bEnAutoOutput      PWM自动输出使能/禁止设定
 ** 
 ** \retval Ok or Error                                      
 *****************************************************************************/
en_result_t Tim3_M23_EnPWM_Output(boolean_t bEnOutput, boolean_t bEnAutoOutput)
{
    en_result_t enResult = Ok;
        
    M0P_TIM3_MODE23->DTR_f.MOE = bEnOutput;
    M0P_TIM3_MODE23->DTR_f.AOE = bEnAutoOutput;
    
    return enResult;
}


/**
 *****************************************************************************
 ** \brief Timer3 启动运行(模式23)
 **
 **
 ** \param [in]  none
 ** 
 ** \retval Ok or Error                                      
 *****************************************************************************/
en_result_t Tim3_M23_Run(void)
{
    en_result_t enResult = Ok;
        
    M0P_TIM3_MODE23->M23CR_f.CTEN = TRUE;
    
    return enResult;
}

/**
 *****************************************************************************
 ** \brief Timer3 停止运行(模式23)
 **
 **
 ** \param [in]  none
 ** 
 ** \retval Ok or Error                                      
 *****************************************************************************/
en_result_t Tim3_M23_Stop(void)
{
    en_result_t enResult = Ok;
        
    M0P_TIM3_MODE23->M23CR_f.CTEN = FALSE;
    
    return enResult;  
}

/**
 *****************************************************************************
 ** \brief Timer3 重载值设置(模式23)
 **
 **
 ** \param [in]  u16Data          16bits重载值
 ** \param [in]  bArrBufEn        ARR重载缓存使能TRUE/禁止FALSE
 ** 
 ** \retval Ok or Error                                      
 *****************************************************************************/
en_result_t Tim3_M23_ARRSet(uint16_t u16Data, boolean_t bArrBufEn)
{
    en_result_t enResult = Ok;
        
     M0P_TIM3_MODE23->ARR_f.ARR       = u16Data;
     M0P_TIM3_MODE23->M23CR_f.BUFPEN  = bArrBufEn;

    return enResult; 
}

/**
 *****************************************************************************
 ** \brief Timer3 16位计数器初值设置(模式23)
 **
 **
 ** \param [in]  u16Data          16位初值
 ** 
 ** \retval Ok or Error                                      
 *****************************************************************************/
en_result_t Tim3_M23_Cnt16Set(uint16_t u16Data)
{
    en_result_t enResult = Ok;
        
    M0P_TIM3_MODE23->CNT_f.CNT = u16Data;

    return enResult; 
}

/**
 *****************************************************************************
 ** \brief Timer3 16位计数值获取(模式23)
 **
 **
 ** \param [in]  none
 ** 
 ** \retval 16bits计数值                                      
 *****************************************************************************/
uint16_t Tim3_M23_Cnt16Get(void)
{
    uint16_t    u16CntData = 0;
        
    u16CntData = M0P_TIM3_MODE23->CNT_f.CNT;
    
    return u16CntData; 
}

/**
 *****************************************************************************
 ** \brief Timer3 比较捕获寄存器CCRxA/CCRxB设置(模式23)
 **
 **
 ** \param [in]  enCCRSel           CCRxA/CCRxB设定
 ** \param [in]  u16Data            CCRxA/CCRxB 16位初始值
 ** 
 ** \retval Ok or Error                                     
 *****************************************************************************/
en_result_t Tim3_M23_CCR_Set(en_tim3_m23_ccrx_t enCCRSel, uint16_t u16Data)
{
    en_result_t enResult = Ok;
        
    if(Tim3CCR0A == enCCRSel)
    {
        M0P_TIM3_MODE23->CCR0A_f.CCR0A = u16Data;
    }
    else if(Tim3CCR0B == enCCRSel)
    {
        M0P_TIM3_MODE23->CCR0B_f.CCR0B = u16Data;
    }
    else if(Tim3CCR1A == enCCRSel)
    {
        M0P_TIM3_MODE23->CCR1A_f.CCR1A = u16Data;
    }
    else if(Tim3CCR1B == enCCRSel)
    {
        M0P_TIM3_MODE23->CCR1B_f.CCR1B = u16Data;
    }
    else if(Tim3CCR2A == enCCRSel)
    {
        M0P_TIM3_MODE23->CCR2A_f.CCR2A = u16Data;
    }
    else if(Tim3CCR2B == enCCRSel)
    {
        M0P_TIM3_MODE23->CCR2B_f.CCR2B = u16Data;
    }
    else
    {
        enResult = Error;
    }
    
    return enResult;
}

/**
 *****************************************************************************
 ** \brief Timer3 比较捕获寄存器CCRxA/CCRxB读取(模式23)
 **
 **
 ** \param [in]  enCCRSel           CCRxA/CCRxB设定
 ** 
 ** \retval 16bitsCCRxA/CCRxB捕获值                                     
 *****************************************************************************/
uint16_t Tim3_M23_CCR_Get(en_tim3_m23_ccrx_t enCCRSel)
{
    uint16_t    u16Data = 0;
    
    if(Tim3CCR0A == enCCRSel)
    {
        u16Data = M0P_TIM3_MODE23->CCR0A_f.CCR0A;
    }
    else if(Tim3CCR0B == enCCRSel)
    {
        u16Data = M0P_TIM3_MODE23->CCR0B_f.CCR0B;
    }
    else if(Tim3CCR1A == enCCRSel)
    {
        u16Data = M0P_TIM3_MODE23->CCR1A_f.CCR1A;
    }
    else if(Tim3CCR1B == enCCRSel)
    {
        u16Data = M0P_TIM3_MODE23->CCR1B_f.CCR1B;
    }
    else if(Tim3CCR2A == enCCRSel)
    {
        u16Data = M0P_TIM3_MODE23->CCR2A_f.CCR2A;
    }
    else if(Tim3CCR2B == enCCRSel)
    {
        u16Data = M0P_TIM3_MODE23->CCR2B_f.CCR2B;
    }
    else
    {
        u16Data = 0;
    }
    
    return u16Data; 
}

/**
 *****************************************************************************
 ** \brief Timer3 PWM互补输出模式下，GATE功能选择(模式23)
 **
 **
 ** \param [in]  pstcCfg       初始化配置结构体指针
 ** 
 ** \retval Ok or Error                                      
 *****************************************************************************/
en_result_t Tim3_M23_GateFuncSel(stc_tim3_m23_gate_cfg_t* pstcCfg)
{
    en_result_t enResult = Ok;
        
    M0P_TIM3_MODE23->M23CR_f.CSG = pstcCfg->enGateFuncSel;
    M0P_TIM3_MODE23->M23CR_f.CRG = pstcCfg->bGateRiseCap;
    M0P_TIM3_MODE23->M23CR_f.CFG = pstcCfg->bGateFallCap;
    
    return enResult;    
}

/**
 *****************************************************************************
 ** \brief Timer3 主从模式配置(模式23)
 **
 **
 ** \param [in]  pstcCfg       初始化配置结构体指针
 ** 
 ** \retval Ok or Error                                      
 *****************************************************************************/
en_result_t Tim3_M23_MasterSlave_Set(stc_tim3_m23_master_slave_cfg_t* pstcCfg)
{
    en_result_t enResult = Ok;
    
    M0P_TIM3_MODE23->MSCR_f.MSM = pstcCfg->enMasterSlaveSel;
    M0P_TIM3_MODE23->MSCR_f.MMS = pstcCfg->enMasterSrc;
    M0P_TIM3_MODE23->MSCR_f.SMS = pstcCfg->enSlaveModeSel;
    M0P_TIM3_MODE23->MSCR_f.TS  = pstcCfg->enTsSel;
    
    return enResult;    
}

/**
 *****************************************************************************
 ** \brief Timer3 CHxA/CHxB比较通道控制(模式23)
 **
 **
 ** \param [in]  pstcCfg          初始化配置结构体指针
 ** \param [in]  enTim3Chx        Timer3通道(Tim3CH0, Tim3CH1, Tim3CH2)
 ** 
 ** \retval Ok or Error                                      
 *****************************************************************************/
en_result_t Tim3_M23_PortOutput_Cfg(en_tim3_channel_t enTim3Chx, stc_tim3_m23_compare_cfg_t* pstcCfg)
{
    en_result_t enResult = Ok;
    
    switch (enTim3Chx)
    {
        case Tim3CH0:
            M0P_TIM3_MODE23->CRCH0_f.CSA         = 0;
            M0P_TIM3_MODE23->FLTR_f.OCMA0_FLTA0  = pstcCfg->enCHxACmpCtrl;
            M0P_TIM3_MODE23->FLTR_f.CCPA0        = pstcCfg->enCHxAPolarity;
            M0P_TIM3_MODE23->CRCH0_f.BUFEA       = pstcCfg->bCHxACmpBufEn;
            M0P_TIM3_MODE23->M23CR_f.CIS         = pstcCfg->enCHxACmpIntSel;
    
            M0P_TIM3_MODE23->CRCH0_f.CSB         = 0;
            M0P_TIM3_MODE23->FLTR_f.OCMB0_FLTB0  = pstcCfg->enCHxBCmpCtrl;
            M0P_TIM3_MODE23->FLTR_f.CCPB0        = pstcCfg->enCHxBPolarity;
            M0P_TIM3_MODE23->CRCH0_f.BUFEB       = pstcCfg->bCHxBCmpBufEn;
            M0P_TIM3_MODE23->CRCH0_f.CISB        = pstcCfg->enCHxBCmpIntSel;
          break;
        case Tim3CH1:
            M0P_TIM3_MODE23->CRCH1_f.CSA         = 0;
            M0P_TIM3_MODE23->FLTR_f.OCMA1_FLTA1  = pstcCfg->enCHxACmpCtrl;
            M0P_TIM3_MODE23->FLTR_f.CCPA1        = pstcCfg->enCHxAPolarity;
            M0P_TIM3_MODE23->CRCH1_f.BUFEA       = pstcCfg->bCHxACmpBufEn;
            M0P_TIM3_MODE23->M23CR_f.CIS         = pstcCfg->enCHxACmpIntSel;
    
            M0P_TIM3_MODE23->CRCH1_f.CSB         = 0;
            M0P_TIM3_MODE23->FLTR_f.OCMB1_FLTB1  = pstcCfg->enCHxBCmpCtrl;
            M0P_TIM3_MODE23->FLTR_f.CCPB1        = pstcCfg->enCHxBPolarity;
            M0P_TIM3_MODE23->CRCH1_f.BUFEB       = pstcCfg->bCHxBCmpBufEn;
            M0P_TIM3_MODE23->CRCH1_f.CISB        = pstcCfg->enCHxBCmpIntSel;
          break;
        case Tim3CH2:
            M0P_TIM3_MODE23->CRCH2_f.CSA         = 0;
            M0P_TIM3_MODE23->FLTR_f.OCMA2_FLTA2  = pstcCfg->enCHxACmpCtrl;
            M0P_TIM3_MODE23->FLTR_f.CCPA2        = pstcCfg->enCHxAPolarity;
            M0P_TIM3_MODE23->CRCH2_f.BUFEA       = pstcCfg->bCHxACmpBufEn;
            M0P_TIM3_MODE23->M23CR_f.CIS         = pstcCfg->enCHxACmpIntSel;
    
            M0P_TIM3_MODE23->CRCH2_f.CSB         = 0;
            M0P_TIM3_MODE23->FLTR_f.OCMB2_FLTB2  = pstcCfg->enCHxBCmpCtrl;
            M0P_TIM3_MODE23->FLTR_f.CCPB2        = pstcCfg->enCHxBPolarity;
            M0P_TIM3_MODE23->CRCH2_f.BUFEB       = pstcCfg->bCHxBCmpBufEn;
            M0P_TIM3_MODE23->CRCH2_f.CISB        = pstcCfg->enCHxBCmpIntSel;
          break;
        default:
            enResult = Error;
          break;
    }
    
    return enResult;    
}

/**
 *****************************************************************************
 ** \brief Timer3 CHxA/CHxB输入控制(模式23)
 **
 **
 ** \param [in]  pstcCfg          初始化配置结构体指针
 ** \param [in]  enTim3Chx        Timer3通道(Tim3CH0, Tim3CH1, Tim3CH2)
 ** 
 ** \retval Ok or Error                                      
 *****************************************************************************/
en_result_t Tim3_M23_PortInput_Cfg(en_tim3_channel_t enTim3Chx, stc_tim3_m23_input_cfg_t* pstcCfg)
{
    en_result_t enResult = Ok;

    switch (enTim3Chx)
    {
        case Tim3CH0:
            M0P_TIM3_MODE23->CRCH0_f.CSA           = 1;
            M0P_TIM3_MODE23->CRCH0_f.CFA_CRA_BKSA  = pstcCfg->enCHxACapSel;
            M0P_TIM3_MODE23->FLTR_f.OCMA0_FLTA0    = pstcCfg->enCHxAInFlt;
            M0P_TIM3_MODE23->FLTR_f.CCPA0          = pstcCfg->enCHxAPolarity;
    
            M0P_TIM3_MODE23->CRCH0_f.CSB           = 1;
            M0P_TIM3_MODE23->CRCH0_f.CFB_CRB_BKSB  = pstcCfg->enCHxBCapSel;
            M0P_TIM3_MODE23->FLTR_f.OCMB0_FLTB0    = pstcCfg->enCHxBInFlt;
            M0P_TIM3_MODE23->FLTR_f.CCPB0          = pstcCfg->enCHxBPolarity;
          break;
        case Tim3CH1:
            M0P_TIM3_MODE23->CRCH1_f.CSA           = 1;
            M0P_TIM3_MODE23->CRCH1_f.CFA_CRA_BKSA  = pstcCfg->enCHxACapSel;
            M0P_TIM3_MODE23->FLTR_f.OCMA1_FLTA1    = pstcCfg->enCHxAInFlt;
            M0P_TIM3_MODE23->FLTR_f.CCPA1          = pstcCfg->enCHxAPolarity;
    
            M0P_TIM3_MODE23->CRCH1_f.CSB           = 1;
            M0P_TIM3_MODE23->CRCH1_f.CFB_CRB_BKSB  = pstcCfg->enCHxBCapSel;
            M0P_TIM3_MODE23->FLTR_f.OCMB1_FLTB1    = pstcCfg->enCHxBInFlt;
            M0P_TIM3_MODE23->FLTR_f.CCPB1          = pstcCfg->enCHxBPolarity;
          break;
        case Tim3CH2:
            M0P_TIM3_MODE23->CRCH2_f.CSA           = 1;
            M0P_TIM3_MODE23->CRCH2_f.CFA_CRA_BKSA  = pstcCfg->enCHxACapSel;
            M0P_TIM3_MODE23->FLTR_f.OCMA2_FLTA2    = pstcCfg->enCHxAInFlt;
            M0P_TIM3_MODE23->FLTR_f.CCPA2          = pstcCfg->enCHxAPolarity;
    
            M0P_TIM3_MODE23->CRCH2_f.CSB           = 1;
            M0P_TIM3_MODE23->CRCH2_f.CFB_CRB_BKSB  = pstcCfg->enCHxBCapSel;
            M0P_TIM3_MODE23->FLTR_f.OCMB2_FLTB2    = pstcCfg->enCHxBInFlt;
            M0P_TIM3_MODE23->FLTR_f.CCPB2          = pstcCfg->enCHxBPolarity;
          break;
        default:
            enResult = Error;
          break;
    }
    return enResult;    
}

/**
 *****************************************************************************
 ** \brief Timer3 ERT输入控制(模式23)
 **
 **
 ** \param [in]  pstcCfg       初始化配置结构体指针
 ** 
 ** \retval Ok or Error                                      
 *****************************************************************************/
en_result_t Tim3_M23_ETRInput_Cfg(stc_tim3_m23_etr_input_cfg_t* pstcCfg)
{
    en_result_t enResult = Ok;
        
    M0P_TIM3_MODE23->FLTR_f.ETP    = pstcCfg->enETRPolarity;
    M0P_TIM3_MODE23->FLTR_f.FLTET  = pstcCfg->enETRFlt;
    
    return enResult;    
}

/**
 *****************************************************************************
 ** \brief Timer3 刹车BK输入控制(模式23)
 **
 **
 ** \param [in]  pstcBkCfg      初始化配置结构体指针
 ** 
 ** \retval Ok or Error                                      
 *****************************************************************************/
en_result_t Tim3_M23_BrakeInput_Cfg(stc_tim3_m23_bk_input_cfg_t* pstcBkCfg)
{
    en_result_t enResult = Ok;
        
    M0P_TIM3_MODE23->DTR_f.BKE             = pstcBkCfg->bEnBrake;
    M0P_TIM3_MODE23->DTR_f.VCE             = pstcBkCfg->bEnVCBrake;
    M0P_TIM3_MODE23->DTR_f.SAFEEN          = pstcBkCfg->bEnSafetyBk;
    M0P_TIM3_MODE23->DTR_f.BKSEL           = pstcBkCfg->bEnBKSync;
    M0P_TIM3_MODE23->CRCH0_f.CFA_CRA_BKSA  = pstcBkCfg->enBkCH0AStat;
    M0P_TIM3_MODE23->CRCH0_f.CFB_CRB_BKSB  = pstcBkCfg->enBkCH0BStat;
    M0P_TIM3_MODE23->CRCH1_f.CFA_CRA_BKSA  = pstcBkCfg->enBkCH1AStat;
    M0P_TIM3_MODE23->CRCH1_f.CFB_CRB_BKSB  = pstcBkCfg->enBkCH1BStat;
    M0P_TIM3_MODE23->CRCH2_f.CFA_CRA_BKSA  = pstcBkCfg->enBkCH2AStat;
    M0P_TIM3_MODE23->CRCH2_f.CFB_CRB_BKSB  = pstcBkCfg->enBkCH2BStat;
    M0P_TIM3_MODE23->FLTR_f.BKP            = pstcBkCfg->enBrakePolarity;
    M0P_TIM3_MODE23->FLTR_f.FLTBK          = pstcBkCfg->enBrakeFlt;
    
    return enResult;    
}

/**
 *****************************************************************************
 ** \brief Base Timer3 触发ADC控制(模式23)
 **
 **
 ** \param [in]  pstcCfg       初始化配置结构体指针
 ** 
 ** \retval Ok or Error                                      
 *****************************************************************************/
en_result_t Tim3_M23_TrigADC_Cfg(stc_tim3_m23_adc_trig_cfg_t* pstcCfg)
{
    en_result_t enResult = Ok;
        
    M0P_TIM3_MODE23->ADTR_f.ADTE   = pstcCfg->bEnTrigADC;
    M0P_TIM3_MODE23->ADTR_f.UEVE   = pstcCfg->bEnUevTrigADC;
    M0P_TIM3_MODE23->ADTR_f.CMA0E  = pstcCfg->bEnCH0ACmpTrigADC;
    M0P_TIM3_MODE23->ADTR_f.CMB0E  = pstcCfg->bEnCH0BCmpTrigADC;
    M0P_TIM3_MODE23->ADTR_f.CMA1E  = pstcCfg->bEnCH1ACmpTrigADC;
    M0P_TIM3_MODE23->ADTR_f.CMB1E  = pstcCfg->bEnCH1BCmpTrigADC;
    M0P_TIM3_MODE23->ADTR_f.CMA2E  = pstcCfg->bEnCH2ACmpTrigADC;
    M0P_TIM3_MODE23->ADTR_f.CMB2E  = pstcCfg->bEnCH2BCmpTrigADC;
    return enResult;    
}

/**
 *****************************************************************************
** \brief Timer3 死区功能(模式23)
 **
 **
 ** \param [in]  pstcCfg       初始化配置结构体指针
 ** 
 ** \retval Ok or Error                                      
 *****************************************************************************/
en_result_t Tim3_M23_DT_Cfg(stc_tim3_m23_dt_cfg_t* pstcCfg)
{
    en_result_t enResult = Ok;
        
    M0P_TIM3_MODE23->DTR_f.DTEN = pstcCfg->bEnDeadTime;
    M0P_TIM3_MODE23->DTR_f.DTR  = pstcCfg->u8DeadTimeValue;
    
    return enResult;    
}

/**
 *****************************************************************************
** \brief Timer3 重复周期设置(模式23)
 **
 **
 ** \param [in]  u8ValidPeriod       重复周期值
 ** 
 ** \retval Ok or Error                                      
 *****************************************************************************/
en_result_t Tim3_M23_SetValidPeriod(uint8_t u8ValidPeriod)
{
    en_result_t enResult = Ok;
        
    M0P_TIM3_MODE23->RCR_f.RCR = u8ValidPeriod;
    
    return enResult;    
}

/**
 *****************************************************************************
 ** \brief Timer3 OCREF清除功能(模式23)
 **
 **
 ** \param [in]  pstcCfg       初始化配置结构体指针
 ** 
 ** \retval Ok or Error                                      
 *****************************************************************************/
en_result_t Tim3_M23_OCRefClr(stc_tim3_m23_OCREF_Clr_cfg_t* pstcCfg)
{
    en_result_t enResult = Ok;
        
    M0P_TIM3_MODE23->M23CR_f.OCCS = pstcCfg->enOCRefClrSrcSel;
    M0P_TIM3_MODE23->M23CR_f.OCCE = pstcCfg->bVCClrEn;
    
    return enResult;    
}

/**
 *****************************************************************************
 ** \brief Timer3 使能DMA传输(模式23)
 **
 **
 ** \param [in]  pstcCfg       初始化配置结构体指针
 ** 
 ** \retval Ok or Error                                      
 *****************************************************************************/
en_result_t Tim3_M23_EnDMA(stc_tim3_m23_trig_dma_cfg_t* pstcCfg)
{
    en_result_t enResult = Ok;
        
    M0P_TIM3_MODE23->M23CR_f.UDE  = pstcCfg->bUevTrigDMA;
    M0P_TIM3_MODE23->M23CR_f.TDE  = pstcCfg->bTITrigDMA;
    M0P_TIM3_MODE23->CRCH0_f.CDEA = pstcCfg->bCmpA0TrigDMA;
    M0P_TIM3_MODE23->CRCH0_f.CDEB = pstcCfg->bCmpB0TrigDMA;
    M0P_TIM3_MODE23->CRCH1_f.CDEA = pstcCfg->bCmpA1TrigDMA;
    M0P_TIM3_MODE23->CRCH1_f.CDEB = pstcCfg->bCmpB1TrigDMA;
    M0P_TIM3_MODE23->CRCH2_f.CDEA = pstcCfg->bCmpA2TrigDMA;
    M0P_TIM3_MODE23->CRCH2_f.CDEB = pstcCfg->bCmpB2TrigDMA;
    M0P_TIM3_MODE23->MSCR_f.CCDS  = pstcCfg->enCmpUevTrigDMA;
    
    return enResult;    
}

/**
 *****************************************************************************
 ** \brief Timer3 捕获比较A软件触发(模式23)
 **
 **
 ** \param [in]  enTim3Chx           Timer3通道(Tim3CH0, Tim3CH1, Tim3CH2)
 ** 
 ** \retval Ok or Error                                      
 *****************************************************************************/
en_result_t Tim3_M23_EnSwTrigCapCmpA(en_tim3_channel_t enTim3Chx)
{
    en_result_t enResult = Ok;
    if(Tim3CH0 == enTim3Chx)
    {
        M0P_TIM3_MODE23->CRCH0_f.CCGA = TRUE;
    }
    else if(Tim3CH1 == enTim3Chx)
    {
        M0P_TIM3_MODE23->CRCH1_f.CCGA = TRUE;
    }
    else if(Tim3CH2 == enTim3Chx)
    {
        M0P_TIM3_MODE23->CRCH2_f.CCGA = TRUE;
    }
    else
    {
        enResult = Error;
    }
    return enResult;    
}

/**
 *****************************************************************************
 ** \brief Timer3 捕获比较B软件触发(模式23)
 **
 **
 ** \param [in]  enTim3Chx           Timer3通道(Tim3CH0, Tim3CH1, Tim3CH2)
 ** 
 ** \retval Ok or Error                                      
 *****************************************************************************/
en_result_t Tim3_M23_EnSwTrigCapCmpB(en_tim3_channel_t enTim3Chx)
{
    en_result_t enResult = Ok;
    if(Tim3CH0 == enTim3Chx)
    {
        M0P_TIM3_MODE23->CRCH0_f.CCGB = TRUE;
    }
    else if(Tim3CH1 == enTim3Chx)
    {
        M0P_TIM3_MODE23->CRCH1_f.CCGB = TRUE;
    }
    else if(Tim3CH2 == enTim3Chx)
    {
        M0P_TIM3_MODE23->CRCH2_f.CCGB = TRUE;
    }
    else
    {
        enResult = Error;
    }
    return enResult;    
}

/**
 *****************************************************************************
 ** \brief Timer3 软件更新使能(模式23)
 **
 **
 ** \param [in]  none
 ** 
 ** \retval Ok or Error                                      
 *****************************************************************************/
en_result_t Tim3_M23_EnSwUev(void)
{
    en_result_t enResult = Ok;
    
    M0P_TIM3_MODE23->M23CR_f.UG = TRUE;
    
    return enResult;    
}

/**
 *****************************************************************************
 ** \brief Timer3 软件触发使能(模式23)
 **
 **
 ** \param [in]  none
 ** 
 ** \retval Ok or Error                                      
 *****************************************************************************/
en_result_t Tim3_M23_EnSwTrig(void)
{
    en_result_t enResult = Ok;
        
    M0P_TIM3_MODE23->M23CR_f.TG = TRUE;
    
    return enResult;    
}

/**
 *****************************************************************************
 ** \brief Timer3 软件刹车使能(模式23)
 **
 **
 ** \param [in]  none
 ** 
 ** \retval Ok or Error                                      
 *****************************************************************************/
en_result_t Tim3_M23_EnSwBk(void)
{
    en_result_t enResult = Ok;
        
    M0P_TIM3_MODE23->M23CR_f.BG = TRUE;
    
    return enResult;    
}

//@} // Tim3Group

/*******************************************************************************
 * EOF (not truncated)
 ******************************************************************************/