//*****************************************************************************
//
// hw_gpio.h - Defines and Macros for GPIO hardware.
//
// Copyright (c) 2005-2017 Texas Instruments Incorporated.  All rights reserved.
// Software License Agreement
//
//   Redistribution and use in source and binary forms, with or without
//   modification, are permitted provided that the following conditions
//   are met:
//
//   Redistributions of source code must retain the above copyright
//   notice, this list of conditions and the following disclaimer.
//
//   Redistributions in binary form must reproduce the above copyright
//   notice, this list of conditions and the following disclaimer in the
//   documentation and/or other materials provided with the
//   distribution.
//
//   Neither the name of Texas Instruments Incorporated nor the names of
//   its contributors may be used to endorse or promote products derived
//   from this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
//*****************************************************************************

#ifndef __HW_GPIO_H__
#define __HW_GPIO_H__

//*****************************************************************************
//
// The following are defines for the GPIO register offsets.
//
//*****************************************************************************
#define GPIO_O_DATA             0x00000000  // GPIO Data
#define GPIO_O_DIR              0x00000400  // GPIO Direction
#define GPIO_O_IS               0x00000404  // GPIO Interrupt Sense
#define GPIO_O_IBE              0x00000408  // GPIO Interrupt Both Edges
#define GPIO_O_IEV              0x0000040C  // GPIO Interrupt Event
#define GPIO_O_IM               0x00000410  // GPIO Interrupt Mask
#define GPIO_O_RIS              0x00000414  // GPIO Raw Interrupt Status
#define GPIO_O_MIS              0x00000418  // GPIO Masked Interrupt Status
#define GPIO_O_ICR              0x0000041C  // GPIO Interrupt Clear
#define GPIO_O_AFSEL            0x00000420  // GPIO Alternate Function Select
#define GPIO_O_DR2R             0x00000500  // GPIO 2-mA Drive Select
#define GPIO_O_DR4R             0x00000504  // GPIO 4-mA Drive Select
#define GPIO_O_DR8R             0x00000508  // GPIO 8-mA Drive Select
#define GPIO_O_ODR              0x0000050C  // GPIO Open Drain Select
#define GPIO_O_PUR              0x00000510  // GPIO Pull-Up Select
#define GPIO_O_PDR              0x00000514  // GPIO Pull-Down Select
#define GPIO_O_SLR              0x00000518  // GPIO Slew Rate Control Select
#define GPIO_O_DEN              0x0000051C  // GPIO Digital Enable
#define GPIO_O_LOCK             0x00000520  // GPIO Lock
#define GPIO_O_CR               0x00000524  // GPIO Commit
#define GPIO_O_AMSEL            0x00000528  // GPIO Analog Mode Select
#define GPIO_O_PCTL             0x0000052C  // GPIO Port Control
#define GPIO_O_ADCCTL           0x00000530  // GPIO ADC Control
#define GPIO_O_DMACTL           0x00000534  // GPIO DMA Control
#define GPIO_O_SI               0x00000538  // GPIO Select Interrupt
#define GPIO_O_DR12R            0x0000053C  // GPIO 12-mA Drive Select
#define GPIO_O_WAKEPEN          0x00000540  // GPIO Wake Pin Enable
#define GPIO_O_WAKELVL          0x00000544  // GPIO Wake Level
#define GPIO_O_WAKESTAT         0x00000548  // GPIO Wake Status
#define GPIO_O_PP               0x00000FC0  // GPIO Peripheral Property
#define GPIO_O_PC               0x00000FC4  // GPIO Peripheral Configuration

//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_O_IM register.
//
//*****************************************************************************
#define GPIO_IM_DMAIME          0x00000100  // GPIO uDMA Done Interrupt Mask
                                            // Enable
#define GPIO_IM_GPIO_M          0x000000FF  // GPIO Interrupt Mask Enable
#define GPIO_IM_GPIO_S          0

//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_O_RIS register.
//
//*****************************************************************************
#define GPIO_RIS_DMARIS         0x00000100  // GPIO uDMA Done Interrupt Raw
                                            // Status
#define GPIO_RIS_GPIO_M         0x000000FF  // GPIO Interrupt Raw Status
#define GPIO_RIS_GPIO_S         0

//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_O_MIS register.
//
//*****************************************************************************
#define GPIO_MIS_DMAMIS         0x00000100  // GPIO uDMA Done Masked Interrupt
                                            // Status
#define GPIO_MIS_GPIO_M         0x000000FF  // GPIO Masked Interrupt Status
#define GPIO_MIS_GPIO_S         0

//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_O_ICR register.
//
//*****************************************************************************
#define GPIO_ICR_DMAIC          0x00000100  // GPIO uDMA Interrupt Clear
#define GPIO_ICR_GPIO_M         0x000000FF  // GPIO Interrupt Clear
#define GPIO_ICR_GPIO_S         0

//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_O_LOCK register.
//
//*****************************************************************************
#define GPIO_LOCK_M             0xFFFFFFFF  // GPIO Lock
#define GPIO_LOCK_UNLOCKED      0x00000000  // The GPIOCR register is unlocked
                                            // and may be modified
#define GPIO_LOCK_LOCKED        0x00000001  // The GPIOCR register is locked
                                            // and may not be modified
#define GPIO_LOCK_KEY           0x4C4F434B  // Unlocks the GPIO_CR register

//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_O_SI register.
//
//*****************************************************************************
#define GPIO_SI_SUM             0x00000001  // Summary Interrupt

//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_O_DR12R register.
//
//*****************************************************************************
#define GPIO_DR12R_DRV12_M      0x000000FF  // Output Pad 12-mA Drive Enable
#define GPIO_DR12R_DRV12_12MA   0x00000001  // The corresponding GPIO pin has
                                            // 12-mA drive. This encoding is
                                            // only valid if the GPIOPP EDE bit
                                            // is set and the appropriate
                                            // GPIOPC EDM bit field is
                                            // programmed to 0x3

//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_O_WAKEPEN register.
//
//*****************************************************************************
#define GPIO_WAKEPEN_WAKEP4     0x00000010  // P[4] Wake Enable

//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_O_WAKELVL register.
//
//*****************************************************************************
#define GPIO_WAKELVL_WAKELVL4   0x00000010  // P[4] Wake Level

//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_O_WAKESTAT
// register.
//
//*****************************************************************************
#define GPIO_WAKESTAT_STAT4     0x00000010  // P[4] Wake Status

//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_O_PP register.
//
//*****************************************************************************
#define GPIO_PP_EDE             0x00000001  // Extended Drive Enable

//*****************************************************************************
//
// The following are defines for the bit fields in the GPIO_O_PC register.
//
//*****************************************************************************
#define GPIO_PC_EDM7_M          0x0000C000  // Extended Drive Mode Bit 7
#define GPIO_PC_EDM6_M          0x00003000  // Extended Drive Mode Bit 6
#define GPIO_PC_EDM5_M          0x00000C00  // Extended Drive Mode Bit 5
#define GPIO_PC_EDM4_M          0x00000300  // Extended Drive Mode Bit 4
#define GPIO_PC_EDM3_M          0x000000C0  // Extended Drive Mode Bit 3
#define GPIO_PC_EDM2_M          0x00000030  // Extended Drive Mode Bit 2
#define GPIO_PC_EDM1_M          0x0000000C  // Extended Drive Mode Bit 1
#define GPIO_PC_EDM0_M          0x00000003  // Extended Drive Mode Bit 0
#define GPIO_PC_EDM0_DISABLE    0x00000000  // Drive values of 2, 4 and 8 mA
                                            // are maintained. GPIO n Drive
                                            // Select (GPIODRnR) registers
                                            // function as normal
#define GPIO_PC_EDM0_6MA        0x00000001  // An additional 6 mA option is
                                            // provided
#define GPIO_PC_EDM0_PLUS2MA    0x00000003  // A 2 mA driver is always enabled;
                                            // setting the corresponding
                                            // GPIODR4R register bit adds 2 mA
                                            // and setting the corresponding
                                            // GPIODR8R of GPIODR12R register
                                            // bit adds an additional 4 mA
#define GPIO_PC_EDM7_S          14
#define GPIO_PC_EDM6_S          12
#define GPIO_PC_EDM5_S          10
#define GPIO_PC_EDM4_S          8
#define GPIO_PC_EDM3_S          6
#define GPIO_PC_EDM2_S          4
#define GPIO_PC_EDM1_S          2

#endif // __HW_GPIO_H__