//***************************************************************************** // // adc.h - ADC headers for using the ADC driver functions. // // Copyright (c) 2005-2017 Texas Instruments Incorporated. All rights reserved. // Software License Agreement // // Redistribution and use in source and binary forms, with or without // modification, are permitted provided that the following conditions // are met: // // Redistributions of source code must retain the above copyright // notice, this list of conditions and the following disclaimer. // // Redistributions in binary form must reproduce the above copyright // notice, this list of conditions and the following disclaimer in the // documentation and/or other materials provided with the // distribution. // // Neither the name of Texas Instruments Incorporated nor the names of // its contributors may be used to endorse or promote products derived // from this software without specific prior written permission. // // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS // "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT // LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR // A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT // OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, // SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT // LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, // DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT // (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE // OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. // //***************************************************************************** #ifndef __DRIVERLIB_ADC_H__ #define __DRIVERLIB_ADC_H__ #include #include //***************************************************************************** // // If building with a C++ compiler, make all of the definitions in this header // have a C binding. // //***************************************************************************** #ifdef __cplusplus extern "C" { #endif //***************************************************************************** // // Values that can be passed to ADCSequenceConfigure as the ui32Trigger // parameter. // //***************************************************************************** #define ADC_TRIGGER_PROCESSOR 0x00000000 // Processor event #define ADC_TRIGGER_COMP0 0x00000001 // Analog comparator 0 event #define ADC_TRIGGER_COMP1 0x00000002 // Analog comparator 1 event #define ADC_TRIGGER_COMP2 0x00000003 // Analog comparator 2 event #define ADC_TRIGGER_EXTERNAL 0x00000004 // External event #define ADC_TRIGGER_TIMER 0x00000005 // Timer event #define ADC_TRIGGER_PWM0 0x00000006 // PWM0 event #define ADC_TRIGGER_PWM1 0x00000007 // PWM1 event #define ADC_TRIGGER_PWM2 0x00000008 // PWM2 event #define ADC_TRIGGER_PWM3 0x00000009 // PWM3 event #define ADC_TRIGGER_NEVER 0x0000000E // Never Trigger #define ADC_TRIGGER_ALWAYS 0x0000000F // Always event //***************************************************************************** // // Values that can be passed to ADCSequenceStepConfigure as the ui32Config // parameter. // //***************************************************************************** #define ADC_CTL_TS 0x00000080 // Temperature sensor select #define ADC_CTL_IE 0x00000040 // Interrupt enable #define ADC_CTL_END 0x00000020 // Sequence end select #define ADC_CTL_D 0x00000010 // Differential select #define ADC_CTL_CH0 0x00000000 // Input channel 0 #define ADC_CTL_CH1 0x00000001 // Input channel 1 #define ADC_CTL_CH2 0x00000002 // Input channel 2 #define ADC_CTL_CH3 0x00000003 // Input channel 3 #define ADC_CTL_CH4 0x00000004 // Input channel 4 #define ADC_CTL_CH5 0x00000005 // Input channel 5 #define ADC_CTL_CH6 0x00000006 // Input channel 6 #define ADC_CTL_CH7 0x00000007 // Input channel 7 #define ADC_CTL_CH8 0x00000008 // Input channel 8 #define ADC_CTL_CH9 0x00000009 // Input channel 9 #define ADC_CTL_CH10 0x0000000A // Input channel 10 #define ADC_CTL_CH11 0x0000000B // Input channel 11 #define ADC_CTL_CH12 0x0000000C // Input channel 12 #define ADC_CTL_CH13 0x0000000D // Input channel 13 #define ADC_CTL_CH14 0x0000000E // Input channel 14 #define ADC_CTL_CH15 0x0000000F // Input channel 15 #define ADC_CTL_CH16 0x00000100 // Input channel 16 #define ADC_CTL_CH17 0x00000101 // Input channel 17 #define ADC_CTL_CH18 0x00000102 // Input channel 18 #define ADC_CTL_CH19 0x00000103 // Input channel 19 #define ADC_CTL_CH20 0x00000104 // Input channel 20 #define ADC_CTL_CH21 0x00000105 // Input channel 21 #define ADC_CTL_CH22 0x00000106 // Input channel 22 #define ADC_CTL_CH23 0x00000107 // Input channel 23 #define ADC_CTL_CMP0 0x00080000 // Select Comparator 0 #define ADC_CTL_CMP1 0x00090000 // Select Comparator 1 #define ADC_CTL_CMP2 0x000A0000 // Select Comparator 2 #define ADC_CTL_CMP3 0x000B0000 // Select Comparator 3 #define ADC_CTL_CMP4 0x000C0000 // Select Comparator 4 #define ADC_CTL_CMP5 0x000D0000 // Select Comparator 5 #define ADC_CTL_CMP6 0x000E0000 // Select Comparator 6 #define ADC_CTL_CMP7 0x000F0000 // Select Comparator 7 #define ADC_CTL_SHOLD_4 0x00000000 // Sample and hold 4 ADC clocks #define ADC_CTL_SHOLD_8 0x00200000 // Sample and hold 8 ADC clocks #define ADC_CTL_SHOLD_16 0x00400000 // Sample and hold 16 ADC clocks #define ADC_CTL_SHOLD_32 0x00600000 // Sample and hold 32 ADC clocks #define ADC_CTL_SHOLD_64 0x00800000 // Sample and hold 64 ADC clocks #define ADC_CTL_SHOLD_128 0x00A00000 // Sample and hold 128 ADC clocks #define ADC_CTL_SHOLD_256 0x00C00000 // Sample and hold 256 ADC clocks //***************************************************************************** // // Values that can be passed to ADCComparatorConfigure as part of the // ui32Config parameter. // //***************************************************************************** #define ADC_COMP_TRIG_NONE 0x00000000 // Trigger Disabled #define ADC_COMP_TRIG_LOW_ALWAYS \ 0x00001000 // Trigger Low Always #define ADC_COMP_TRIG_LOW_ONCE 0x00001100 // Trigger Low Once #define ADC_COMP_TRIG_LOW_HALWAYS \ 0x00001200 // Trigger Low Always (Hysteresis) #define ADC_COMP_TRIG_LOW_HONCE 0x00001300 // Trigger Low Once (Hysteresis) #define ADC_COMP_TRIG_MID_ALWAYS \ 0x00001400 // Trigger Mid Always #define ADC_COMP_TRIG_MID_ONCE 0x00001500 // Trigger Mid Once #define ADC_COMP_TRIG_HIGH_ALWAYS \ 0x00001C00 // Trigger High Always #define ADC_COMP_TRIG_HIGH_ONCE 0x00001D00 // Trigger High Once #define ADC_COMP_TRIG_HIGH_HALWAYS \ 0x00001E00 // Trigger High Always (Hysteresis) #define ADC_COMP_TRIG_HIGH_HONCE \ 0x00001F00 // Trigger High Once (Hysteresis) #define ADC_COMP_INT_NONE 0x00000000 // Interrupt Disabled #define ADC_COMP_INT_LOW_ALWAYS \ 0x00000010 // Interrupt Low Always #define ADC_COMP_INT_LOW_ONCE 0x00000011 // Interrupt Low Once #define ADC_COMP_INT_LOW_HALWAYS \ 0x00000012 // Interrupt Low Always // (Hysteresis) #define ADC_COMP_INT_LOW_HONCE 0x00000013 // Interrupt Low Once (Hysteresis) #define ADC_COMP_INT_MID_ALWAYS \ 0x00000014 // Interrupt Mid Always #define ADC_COMP_INT_MID_ONCE 0x00000015 // Interrupt Mid Once #define ADC_COMP_INT_HIGH_ALWAYS \ 0x0000001C // Interrupt High Always #define ADC_COMP_INT_HIGH_ONCE 0x0000001D // Interrupt High Once #define ADC_COMP_INT_HIGH_HALWAYS \ 0x0000001E // Interrupt High Always // (Hysteresis) #define ADC_COMP_INT_HIGH_HONCE \ 0x0000001F // Interrupt High Once (Hysteresis) //***************************************************************************** // // Values that can be used to modify the sequence number passed to // ADCProcessorTrigger in order to get cross-module synchronous processor // triggers. // //***************************************************************************** #define ADC_TRIGGER_WAIT 0x08000000 // Wait for the synchronous trigger #define ADC_TRIGGER_SIGNAL 0x80000000 // Signal the synchronous trigger //***************************************************************************** // // Values that can be passed to ADCPhaseDelaySet as the ui32Phase parameter and // returned from ADCPhaseDelayGet. // //***************************************************************************** #define ADC_PHASE_0 0x00000000 // 0 degrees #define ADC_PHASE_22_5 0x00000001 // 22.5 degrees #define ADC_PHASE_45 0x00000002 // 45 degrees #define ADC_PHASE_67_5 0x00000003 // 67.5 degrees #define ADC_PHASE_90 0x00000004 // 90 degrees #define ADC_PHASE_112_5 0x00000005 // 112.5 degrees #define ADC_PHASE_135 0x00000006 // 135 degrees #define ADC_PHASE_157_5 0x00000007 // 157.5 degrees #define ADC_PHASE_180 0x00000008 // 180 degrees #define ADC_PHASE_202_5 0x00000009 // 202.5 degrees #define ADC_PHASE_225 0x0000000A // 225 degrees #define ADC_PHASE_247_5 0x0000000B // 247.5 degrees #define ADC_PHASE_270 0x0000000C // 270 degrees #define ADC_PHASE_292_5 0x0000000D // 292.5 degrees #define ADC_PHASE_315 0x0000000E // 315 degrees #define ADC_PHASE_337_5 0x0000000F // 337.5 degrees //***************************************************************************** // // Values that can be passed to ADCReferenceSet as the ui32Ref parameter. // //***************************************************************************** #define ADC_REF_INT 0x00000000 // Internal reference #define ADC_REF_EXT_3V 0x00000001 // External 3V reference //***************************************************************************** // // Values that can be passed to ADCIntDisableEx(), ADCIntEnableEx(), // ADCIntClearEx() and ADCIntStatusEx(). // //***************************************************************************** #define ADC_INT_SS0 0x00000001 #define ADC_INT_SS1 0x00000002 #define ADC_INT_SS2 0x00000004 #define ADC_INT_SS3 0x00000008 #define ADC_INT_DMA_SS0 0x00000100 #define ADC_INT_DMA_SS1 0x00000200 #define ADC_INT_DMA_SS2 0x00000400 #define ADC_INT_DMA_SS3 0x00000800 #define ADC_INT_DCON_SS0 0x00010000 #define ADC_INT_DCON_SS1 0x00020000 #define ADC_INT_DCON_SS2 0x00040000 #define ADC_INT_DCON_SS3 0x00080000 //***************************************************************************** // // Values that can be passed to ADCClockConfigSet() and ADCClockConfigGet(). // //***************************************************************************** #define ADC_CLOCK_RATE_FULL 0x00000070 #define ADC_CLOCK_RATE_HALF 0x00000050 #define ADC_CLOCK_RATE_FOURTH 0x00000030 #define ADC_CLOCK_RATE_EIGHTH 0x00000010 #define ADC_CLOCK_SRC_PLL 0x00000000 #define ADC_CLOCK_SRC_ALTCLK 0x00000001 #define ADC_CLOCK_SRC_MOSC 0x00000002 //***************************************************************************** // // Prototypes for the APIs. // //***************************************************************************** extern void ADCIntRegister(uint32_t ui32Base, uint32_t ui32SequenceNum, void (*pfnHandler)(void)); extern void ADCIntUnregister(uint32_t ui32Base, uint32_t ui32SequenceNum); extern void ADCIntDisable(uint32_t ui32Base, uint32_t ui32SequenceNum); extern void ADCIntEnable(uint32_t ui32Base, uint32_t ui32SequenceNum); extern uint32_t ADCIntStatus(uint32_t ui32Base, uint32_t ui32SequenceNum, bool bMasked); extern void ADCIntClear(uint32_t ui32Base, uint32_t ui32SequenceNum); extern void ADCSequenceEnable(uint32_t ui32Base, uint32_t ui32SequenceNum); extern void ADCSequenceDisable(uint32_t ui32Base, uint32_t ui32SequenceNum); extern void ADCSequenceConfigure(uint32_t ui32Base, uint32_t ui32SequenceNum, uint32_t ui32Trigger, uint32_t ui32Priority); extern void ADCSequenceStepConfigure(uint32_t ui32Base, uint32_t ui32SequenceNum, uint32_t ui32Step, uint32_t ui32Config); extern int32_t ADCSequenceOverflow(uint32_t ui32Base, uint32_t ui32SequenceNum); extern void ADCSequenceOverflowClear(uint32_t ui32Base, uint32_t ui32SequenceNum); extern int32_t ADCSequenceUnderflow(uint32_t ui32Base, uint32_t ui32SequenceNum); extern void ADCSequenceUnderflowClear(uint32_t ui32Base, uint32_t ui32SequenceNum); extern int32_t ADCSequenceDataGet(uint32_t ui32Base, uint32_t ui32SequenceNum, uint32_t *pui32Buffer); extern void ADCProcessorTrigger(uint32_t ui32Base, uint32_t ui32SequenceNum); extern void ADCSoftwareOversampleConfigure(uint32_t ui32Base, uint32_t ui32SequenceNum, uint32_t ui32Factor); extern void ADCSoftwareOversampleStepConfigure(uint32_t ui32Base, uint32_t ui32SequenceNum, uint32_t ui32Step, uint32_t ui32Config); extern void ADCSoftwareOversampleDataGet(uint32_t ui32Base, uint32_t ui32SequenceNum, uint32_t *pui32Buffer, uint32_t ui32Count); extern void ADCHardwareOversampleConfigure(uint32_t ui32Base, uint32_t ui32Factor); extern void ADCClockConfigSet(uint32_t ui32Base, uint32_t ui32Config, uint32_t ui32ClockDiv); extern uint32_t ADCClockConfigGet(uint32_t ui32Base, uint32_t *pui32ClockDiv); extern void ADCComparatorConfigure(uint32_t ui32Base, uint32_t ui32Comp, uint32_t ui32Config); extern void ADCComparatorRegionSet(uint32_t ui32Base, uint32_t ui32Comp, uint32_t ui32LowRef, uint32_t ui32HighRef); extern void ADCComparatorReset(uint32_t ui32Base, uint32_t ui32Comp, bool bTrigger, bool bInterrupt); extern void ADCComparatorIntDisable(uint32_t ui32Base, uint32_t ui32SequenceNum); extern void ADCComparatorIntEnable(uint32_t ui32Base, uint32_t ui32SequenceNum); extern uint32_t ADCComparatorIntStatus(uint32_t ui32Base); extern void ADCComparatorIntClear(uint32_t ui32Base, uint32_t ui32Status); extern void ADCIntDisableEx(uint32_t ui32Base, uint32_t ui32IntFlags); extern void ADCIntEnableEx(uint32_t ui32Base, uint32_t ui32IntFlags); extern uint32_t ADCIntStatusEx(uint32_t ui32Base, bool bMasked); extern void ADCIntClearEx(uint32_t ui32Base, uint32_t ui32IntFlags); extern void ADCSequenceDMAEnable(uint32_t ui32Base, uint32_t ui32SequenceNum); extern void ADCSequenceDMADisable(uint32_t ui32Base, uint32_t ui32SequenceNum); extern bool ADCBusy(uint32_t ui32Base); extern void ADCReferenceSet(uint32_t ui32Base, uint32_t ui32Ref); extern uint32_t ADCReferenceGet(uint32_t ui32Base); extern void ADCPhaseDelaySet(uint32_t ui32Base, uint32_t ui32Phase); extern uint32_t ADCPhaseDelayGet(uint32_t ui32Base); extern void ADCSampleRateSet(uint32_t ui32Base, uint32_t ui32ADCClock, uint32_t ui32Rate); extern uint32_t ADCSampleRateGet(uint32_t ui32Base); //***************************************************************************** // // Mark the end of the C bindings section for C++ compilers. // //***************************************************************************** #ifdef __cplusplus } #endif #endif // __DRIVERLIB_ADC_H__