/**************************************************************************//** * * @copyright (C) 2020 Nuvoton Technology Corp. All rights reserved. * * SPDX-License-Identifier: Apache-2.0 * * Change Logs: * Date Author Notes * 2020-11-11 Wayne First version * ******************************************************************************/ #include #if defined(BSP_USING_QSPI) #define LOG_TAG "drv.qspi" #define DBG_ENABLE #define DBG_SECTION_NAME LOG_TAG #define DBG_LEVEL DBG_INFO #define DBG_COLOR #include #include #include #include /* Private define ---------------------------------------------------------------*/ enum { QSPI_START = -1, #if defined(BSP_USING_QSPI0) QSPI0_IDX, #endif #if defined(BSP_USING_QSPI1) QSPI1_IDX, #endif QSPI_CNT }; /* Private typedef --------------------------------------------------------------*/ /* Private functions ------------------------------------------------------------*/ static rt_err_t nu_qspi_bus_configure(struct rt_spi_device *device, struct rt_spi_configuration *configuration); static rt_uint32_t nu_qspi_bus_xfer(struct rt_spi_device *device, struct rt_spi_message *message); static int nu_qspi_register_bus(struct nu_spi *qspi_bus, const char *name); /* Public functions -------------------------------------------------------------*/ /* Private variables ------------------------------------------------------------*/ static struct rt_spi_ops nu_qspi_poll_ops = { .configure = nu_qspi_bus_configure, .xfer = nu_qspi_bus_xfer, }; static struct nu_spi nu_qspi_arr [] = { #if defined(BSP_USING_QSPI0) { .name = "qspi0", .spi_base = (SPI_T *)QSPI0, .rstidx = QSPI0_RST, #if defined(BSP_USING_SPI_PDMA) #if defined(BSP_USING_QSPI0_PDMA) .pdma_perp_tx = PDMA_QSPI0_TX, .pdma_perp_rx = PDMA_QSPI0_RX, #else .pdma_perp_tx = NU_PDMA_UNUSED, .pdma_perp_rx = NU_PDMA_UNUSED, #endif #endif }, #endif #if defined(BSP_USING_QSPI1) { .name = "qspi1", .spi_base = (SPI_T *)QSPI1, .rstidx = QSPI1_RST, #if defined(BSP_USING_SPI_PDMA) #if defined(BSP_USING_QSPI1_PDMA) .pdma_perp_tx = PDMA_QSPI1_TX, .pdma_perp_rx = PDMA_QSPI1_RX, #else .pdma_perp_tx = NU_PDMA_UNUSED, .pdma_perp_rx = NU_PDMA_UNUSED, #endif #endif }, #endif }; /* qspi nu_qspi */ static rt_err_t nu_qspi_bus_configure(struct rt_spi_device *device, struct rt_spi_configuration *configuration) { struct nu_spi *spi_bus; rt_uint32_t u32SPIMode; rt_err_t ret = RT_EOK; RT_ASSERT(device != RT_NULL); RT_ASSERT(configuration != RT_NULL); spi_bus = (struct nu_spi *) device->bus; /* Check mode */ switch (configuration->mode & RT_SPI_MODE_3) { case RT_SPI_MODE_0: u32SPIMode = SPI_MODE_0; break; case RT_SPI_MODE_1: u32SPIMode = SPI_MODE_1; break; case RT_SPI_MODE_2: u32SPIMode = SPI_MODE_2; break; case RT_SPI_MODE_3: u32SPIMode = SPI_MODE_3; break; default: ret = RT_EIO; goto exit_nu_qspi_bus_configure; } /* Check data width */ if (!(configuration->data_width == 8 || configuration->data_width == 16 || configuration->data_width == 24 || configuration->data_width == 32)) { ret = RT_EINVAL; goto exit_nu_qspi_bus_configure; } /* Need to initialize new configuration? */ if (rt_memcmp(configuration, &spi_bus->configuration, sizeof(struct rt_spi_configuration)) != 0) { uint32_t u32ActualClk; rt_memcpy(&spi_bus->configuration, configuration, sizeof(struct rt_spi_configuration)); u32ActualClk = QSPI_Open((QSPI_T *)spi_bus->spi_base, SPI_MASTER, u32SPIMode, configuration->data_width, configuration->max_hz); LOG_I("[%s] Preferred clock:%d, Actually:%d", spi_bus->name, configuration->max_hz, u32ActualClk); if (configuration->mode & RT_SPI_CS_HIGH) { /* Set CS pin to LOW */ SPI_SET_SS_LOW(spi_bus->spi_base); } else { /* Set CS pin to HIGH */ SPI_SET_SS_HIGH(spi_bus->spi_base); } if (configuration->mode & RT_SPI_MSB) { /* Set sequence to MSB first */ SPI_SET_MSB_FIRST(spi_bus->spi_base); } else { /* Set sequence to LSB first */ SPI_SET_LSB_FIRST(spi_bus->spi_base); } } /* Clear SPI RX FIFO */ nu_spi_drain_rxfifo(spi_bus->spi_base); exit_nu_qspi_bus_configure: return -(ret); } static int nu_qspi_mode_config(struct nu_spi *qspi_bus, rt_uint8_t *tx, rt_uint8_t *rx, int qspi_lines) { QSPI_T *qspi_base = (QSPI_T *)qspi_bus->spi_base; if (qspi_lines > 1) { if (tx) { switch (qspi_lines) { case 2: QSPI_ENABLE_DUAL_OUTPUT_MODE(qspi_base); break; case 4: QSPI_ENABLE_QUAD_OUTPUT_MODE(qspi_base); break; default: LOG_E("Data line is not supported.\n"); break; } } else { switch (qspi_lines) { case 2: QSPI_ENABLE_DUAL_INPUT_MODE(qspi_base); break; case 4: QSPI_ENABLE_QUAD_INPUT_MODE(qspi_base); break; default: LOG_E("Data line is not supported.\n"); break; } } } else { QSPI_DISABLE_DUAL_MODE(qspi_base); QSPI_DISABLE_QUAD_MODE(qspi_base); } return qspi_lines; } static rt_uint32_t nu_qspi_bus_xfer(struct rt_spi_device *device, struct rt_spi_message *message) { struct nu_spi *qspi_bus; struct rt_qspi_configuration *qspi_configuration; struct rt_qspi_message *qspi_message; rt_uint8_t u8last = 1; rt_uint8_t bytes_per_word; QSPI_T *qspi_base; rt_uint32_t u32len = 0; RT_ASSERT(device != RT_NULL); RT_ASSERT(message != RT_NULL); qspi_bus = (struct nu_spi *) device->bus; qspi_base = (QSPI_T *)qspi_bus->spi_base; qspi_configuration = &qspi_bus->configuration; bytes_per_word = qspi_configuration->parent.data_width / 8; if (message->cs_take && !(qspi_configuration->parent.mode & RT_SPI_NO_CS)) { if (qspi_configuration->parent.mode & RT_SPI_CS_HIGH) { QSPI_SET_SS_HIGH(qspi_base); } else { QSPI_SET_SS_LOW(qspi_base); } } qspi_message = (struct rt_qspi_message *)message; /* Command + Address + Dummy + Data */ /* Command stage */ if (qspi_message->instruction.content != 0) { u8last = nu_qspi_mode_config(qspi_bus, (rt_uint8_t *) &qspi_message->instruction.content, RT_NULL, qspi_message->instruction.qspi_lines); nu_spi_transfer((struct nu_spi *)qspi_bus, (rt_uint8_t *) &qspi_message->instruction.content, RT_NULL, 1, 1); } /* Address stage */ if (qspi_message->address.size > 0) { rt_uint32_t u32ReversedAddr = 0; rt_uint32_t u32AddrNumOfByte = qspi_message->address.size / 8; switch (u32AddrNumOfByte) { case 1: u32ReversedAddr = (qspi_message->address.content & 0xff); break; case 2: nu_set16_be((rt_uint8_t *)&u32ReversedAddr, qspi_message->address.content); break; case 3: nu_set24_be((rt_uint8_t *)&u32ReversedAddr, qspi_message->address.content); break; case 4: nu_set32_be((rt_uint8_t *)&u32ReversedAddr, qspi_message->address.content); break; default: RT_ASSERT(0); break; } u8last = nu_qspi_mode_config(qspi_bus, (rt_uint8_t *)&u32ReversedAddr, RT_NULL, qspi_message->address.qspi_lines); nu_spi_transfer((struct nu_spi *)qspi_bus, (rt_uint8_t *) &u32ReversedAddr, RT_NULL, u32AddrNumOfByte, 1); } /* alternate_bytes stage */ if ((qspi_message->alternate_bytes.size > 0) && (qspi_message->alternate_bytes.size <= 4)) { rt_uint32_t u32AlternateByte = 0; rt_uint32_t u32NumOfByte = qspi_message->alternate_bytes.size / 8; switch (u32NumOfByte) { case 1: u32AlternateByte = (qspi_message->alternate_bytes.content & 0xff); break; case 2: nu_set16_be((rt_uint8_t *)&u32AlternateByte, qspi_message->alternate_bytes.content); break; case 3: nu_set24_be((rt_uint8_t *)&u32AlternateByte, qspi_message->alternate_bytes.content); break; case 4: nu_set32_be((rt_uint8_t *)&u32AlternateByte, qspi_message->alternate_bytes.content); break; default: RT_ASSERT(0); break; } u8last = nu_qspi_mode_config(qspi_bus, (rt_uint8_t *)&u32AlternateByte, RT_NULL, qspi_message->alternate_bytes.qspi_lines); nu_spi_transfer((struct nu_spi *)qspi_bus, (rt_uint8_t *) &u32AlternateByte, RT_NULL, u32NumOfByte, 1); } /* Dummy_cycles stage */ if (qspi_message->dummy_cycles > 0) { qspi_bus->dummy = 0x00; u8last = nu_qspi_mode_config(qspi_bus, (rt_uint8_t *) &qspi_bus->dummy, RT_NULL, u8last); nu_spi_transfer((struct nu_spi *)qspi_bus, (rt_uint8_t *) &qspi_bus->dummy, RT_NULL, qspi_message->dummy_cycles / (8 / u8last), 1); } if (message->length > 0) { /* Data stage */ nu_qspi_mode_config(qspi_bus, (rt_uint8_t *) message->send_buf, (rt_uint8_t *) message->recv_buf, qspi_message->qspi_data_lines); nu_spi_transfer((struct nu_spi *)qspi_bus, (rt_uint8_t *) message->send_buf, (rt_uint8_t *) message->recv_buf, message->length, bytes_per_word); u32len = message->length; } else { u32len = 1; } if (message->cs_release && !(qspi_configuration->parent.mode & RT_SPI_NO_CS)) { if (qspi_configuration->parent.mode & RT_SPI_CS_HIGH) { QSPI_SET_SS_LOW(qspi_base); } else { QSPI_SET_SS_HIGH(qspi_base); } } return u32len; } static int nu_qspi_register_bus(struct nu_spi *qspi_bus, const char *name) { return rt_qspi_bus_register(&qspi_bus->dev, name, &nu_qspi_poll_ops); } /** * Hardware SPI Initial */ static int rt_hw_qspi_init(void) { rt_uint8_t i; for (i = (QSPI_START + 1); i < QSPI_CNT; i++) { nu_sys_ip_reset(nu_qspi_arr[i].rstidx); nu_qspi_register_bus(&nu_qspi_arr[i], nu_qspi_arr[i].name); #if defined(BSP_USING_SPI_PDMA) nu_qspi_arr[i].pdma_chanid_tx = -1; nu_qspi_arr[i].pdma_chanid_rx = -1; #endif #if defined(BSP_USING_QSPI_PDMA) if ((nu_qspi_arr[i].pdma_perp_tx != NU_PDMA_UNUSED) && (nu_qspi_arr[i].pdma_perp_rx != NU_PDMA_UNUSED)) { if (nu_hw_spi_pdma_allocate(&nu_qspi_arr[i]) != RT_EOK) { LOG_E("Failed to allocate DMA channels for %s. We will use poll-mode for this bus.\n", nu_qspi_arr[i].name); } } #endif } return 0; } INIT_PREV_EXPORT(rt_hw_qspi_init); rt_err_t nu_qspi_bus_attach_device(const char *bus_name, const char *device_name, rt_uint8_t data_line_width, void (*enter_qspi_mode)(), void (*exit_qspi_mode)()) { struct rt_qspi_device *qspi_device = RT_NULL; rt_err_t result = RT_EOK; RT_ASSERT(bus_name != RT_NULL); RT_ASSERT(device_name != RT_NULL); RT_ASSERT(data_line_width == 1 || data_line_width == 2 || data_line_width == 4); qspi_device = (struct rt_qspi_device *)rt_malloc(sizeof(struct rt_qspi_device)); if (qspi_device == RT_NULL) { LOG_E("no memory, qspi bus attach device failed!\n"); result = -RT_ENOMEM; goto __exit; } qspi_device->enter_qspi_mode = enter_qspi_mode; qspi_device->exit_qspi_mode = exit_qspi_mode; qspi_device->config.qspi_dl_width = data_line_width; result = rt_spi_bus_attach_device(&qspi_device->parent, device_name, bus_name, RT_NULL); __exit: if (result != RT_EOK) { if (qspi_device) { rt_free(qspi_device); } } return result; } #endif //#if defined(BSP_USING_QSPI)