//***************************************************************************** // // usbhid.h - Definitions used by Communication Device Class devices. // // Copyright (c) 2007-2010 Texas Instruments Incorporated. All rights reserved. // Software License Agreement // // Texas Instruments (TI) is supplying this software for use solely and // exclusively on TI's microcontroller products. The software is owned by // TI and/or its suppliers, and is protected under applicable copyright // laws. You may not combine this software with "viral" open-source // software in order to form a larger program. // // THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. // NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT // NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR // A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY // CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL // DAMAGES, FOR ANY REASON WHATSOEVER. // // //***************************************************************************** //***************************************************************************** // // Note: This header contains definitions related to the USB Communication // Device Class specification. The header is complete for ACM model // devices but request and notification definitions specific to other // modem types, ISDN, ATM and Ethernet are currently incomplete or // omitted. // //***************************************************************************** #ifndef __USBCDC_H__ #define __USBCDC_H__ //***************************************************************************** // // If building with a C++ compiler, make all of the definitions in this header // have a C binding. // //***************************************************************************** #ifdef __cplusplus extern "C" { #endif //***************************************************************************** // //! \addtogroup cdc_device_class_api //! @{ // //***************************************************************************** //***************************************************************************** // // Generic macros to read a byte, word or long from a character pointer. // //***************************************************************************** #define BYTE(pucData) (*(uint8 *)(pucData)) #define SHORT(pucData) (*(uint16 *)(pucData)) #define LONG(pucData) (*(uint32 *)(pucData)) //***************************************************************************** // // USB CDC subclass codes. Used in interface descriptor, bInterfaceClass // //***************************************************************************** #define USB_CDC_SUBCLASS_DIRECT_LINE_MODEL 0x01 #define USB_CDC_SUBCLASS_ABSTRACT_MODEL 0x02 #define USB_CDC_SUBCLASS_TELEPHONE_MODEL 0x03 #define USB_CDC_SUBCLASS_MULTI_CHANNEL_MODEL 0x04 #define USB_CDC_SUBCLASS_CAPI_MODEL 0x05 #define USB_CDC_SUBCLASS_ETHERNET_MODEL 0x06 #define USB_CDC_SUBCLASS_ATM_MODEL 0x07 //***************************************************************************** // // USB CDC control interface protocols. Used in control interface descriptor, // bInterfaceProtocol // //***************************************************************************** #define USB_CDC_PROTOCOL_NONE 0x00 #define USB_CDC_PROTOCOL_V25TER 0x01 #define USB_CDC_PROTOCOL_VENDOR 0xFF //***************************************************************************** // // USB CDC data interface protocols. Used in data interface descriptor, // bInterfaceProtocol // //***************************************************************************** // USB_CDC_PROTOCOL_NONE 0x00 #define USB_CDC_PROTOCOL_I420 0x30 #define USB_CDC_PROTOCOL_TRANSPARENT 0x32 #define USB_CDC_PROTOCOL_Q921M 0x50 #define USB_CDC_PROTOCOL_Q921 0x51 #define USB_CDC_PROTOCOL_Q921TM 0x52 #define USB_CDC_PROTOCOL_V42BIS 0x90 #define USB_CDC_PROTOCOL_Q921EURO 0x91 #define USB_CDC_PROTOCOL_V120 0x92 #define USB_CDC_PROTOCOL_CAPI20 0x93 #define USB_CDC_PROTOCOL_HOST_DRIVER 0xFD #define USB_CDC_PROTOCOL_CDC_SPEC 0xFE // USB_CDC_PROTOCOL_VENDOR 0xFF //***************************************************************************** // // Functional descriptor definitions // //***************************************************************************** //***************************************************************************** // // Functional descriptor types // //***************************************************************************** #define USB_CDC_CS_INTERFACE 0x24 #define USB_CDC_CS_ENDPOINT 0x25 //***************************************************************************** // // Functional descriptor subtypes // //***************************************************************************** #define USB_CDC_FD_SUBTYPE_HEADER 0x00 #define USB_CDC_FD_SUBTYPE_CALL_MGMT 0x01 #define USB_CDC_FD_SUBTYPE_ABSTRACT_CTL_MGMT 0x02 #define USB_CDC_FD_SUBTYPE_DIRECT_LINE_MGMT 0x03 #define USB_CDC_FD_SUBTYPE_TELEPHONE_RINGER 0x04 #define USB_CDC_FD_SUBTYPE_LINE_STATE_CAPS 0x05 #define USB_CDC_FD_SUBTYPE_UNION 0x06 #define USB_CDC_FD_SUBTYPE_COUNTRY 0x07 #define USB_CDC_FD_SUBTYPE_TELEPHONE_MODES 0x08 #define USB_CDC_FD_SUBTYPE_USB_TERMINAL 0x09 #define USB_CDC_FD_SUBTYPE_NETWORK_TERMINAL 0x0A #define USB_CDC_FD_SUBTYPE_PROTOCOL_UNIT 0x0B #define USB_CDC_FD_SUBTYPE_EXTENSION_UNIT 0x0C #define USB_CDC_FD_SUBTYPE_MULTI_CHANNEL_MGMT 0x0D #define USB_CDC_FD_SUBTYPE_CAPI_MGMT 0x0E #define USB_CDC_FD_SUBTYPE_ETHERNET 0x0F #define USB_CDC_FD_SUBTYPE_ATM 0x10 //***************************************************************************** // // USB_CDC_FD_SUBTYPE_CALL_MGMT, Header functional descriptor, bmCapabilities // //***************************************************************************** #define USB_CDC_CALL_MGMT_VIA_DATA 0x02 #define USB_CDC_CALL_MGMT_HANDLED 0x01 //***************************************************************************** // // USB_CDC_FD_SUBTYPE_ABSTRACT_CTL_MGMT, Abstract Control Management functional // descriptor, bmCapabilities // //***************************************************************************** #define USB_CDC_ACM_SUPPORTS_NETWORK_CONNECTION 0x08 #define USB_CDC_ACM_SUPPORTS_SEND_BREAK 0x04 #define USB_CDC_ACM_SUPPORTS_LINE_PARAMS 0x02 #define USB_CDC_ACM_SUPPORTS_COMM_FEATURE 0x01 //***************************************************************************** // // USB_CDC_FD_SUBTYPE_DIRECT_LINE_MGMT, Direct Line Management functional // descriptor, bmCapabilities // //***************************************************************************** #define USB_CDC_DLM_NEEDS_EXTRA_PULSE_SETUP 0x04 #define USB_CDC_DLM_SUPPORTS_AUX 0x02 #define USB_CDC_DLM_SUPPORTS_PULSE 0x01 //***************************************************************************** // // USB_CDC_FD_SUBTYPE_TELEPHONE_MODES, Telephone Operational Modes functional // descriptor, bmCapabilities // //***************************************************************************** #define USB_CDC_TELEPHONE_SUPPORTS_COMPUTER 0x04 #define USB_CDC_TELEPHONE_SUPPORTS_STANDALONE 0x02 #define USB_CDC_TELEPHONE_SUPPORTS_SIMPLE 0x01 //***************************************************************************** // // USB_CDC_FD_SUBTYPE_LINE_STATE_CAPS, Telephone Call and Line State Reporting // Capabilities descriptor // //***************************************************************************** #define USB_CDC_LINE_STATE_CHANGES_NOTIFIED 0x20 #define USB_CDC_LINE_STATE_REPORTS_DTMF 0x10 #define USB_CDC_LINE_STATE_REPORTS_DIST_RING 0x08 #define USB_CDC_LINE_STATE_REPORTS_CALLERID 0x04 #define USB_CDC_LINE_STATE_REPORTS_BUSY 0x02 #define USB_CDC_LINE_STATE_REPORTS_INT_DIALTONE 0x01 //***************************************************************************** // // USB_CDC_FD_SUBTYPE_USB_TERMINAL, USB Terminal functional descriptor, // bmOptions // //***************************************************************************** #define USB_CDC_TERMINAL_NO_WRAPPER_USED 0x00 #define USB_CDC_TERMINAL_WRAPPER_USED 0x01 //***************************************************************************** // // USB_CDC_FD_SUBTYPE_MULTI_CHANNEL_MGMT, Multi-Channel Management functional // descriptor, bmCapabilities // //***************************************************************************** #define USB_CDC_MCM_SUPPORTS_SET_UNIT_PARAM 0x04 #define USB_CDC_MCM_SUPPORTS_CLEAR_UNIT_PARAM 0x02 #define USB_CDC_MCM_UNIT_PARAMS_NON_VOLATILE 0x01 //***************************************************************************** // // USB_CDC_FD_SUBTYPE_CAPI_MGMT, CAPI Control Management functional descriptor, // bmCapabilities // //***************************************************************************** #define USB_CDC_CAPI_INTELLIGENT 0x01 #define USB_CDC_CAPI_SIMPLE 0x00 //***************************************************************************** // // USB_CDC_FD_SUBTYPE_ETHERNET, Ethernet Networking functional descriptor, // bmEthernetStatistics // //***************************************************************************** #define USB_CDC_ETHERNET_XMIT_OK 0x01000000 #define USB_CDC_ETHERNET_RCV_OK 0x02000000 #define USB_CDC_ETHERNET_XMIT_ERROR 0x04000000 #define USB_CDC_ETHERNET_RCV_ERROR 0x08000000 #define USB_CDC_ETHERNET_RCV_NO_BUFFER 0x10000000 #define USB_CDC_ETHERNET_DIRECTED_BYTES_XMIT 0x20000000 #define USB_CDC_ETHERNET_DIRECTED_FRAMES_XMIT 0x40000000 #define USB_CDC_ETHERNET_MULTICAST_BYTES_XMIT 0x80000000 #define USB_CDC_ETHERNET_MULTICAST_FRAMES_XMIT 0x00010000 #define USB_CDC_ETHERNET_BROADCAST_BYTES_XMIT 0x00020000 #define USB_CDC_ETHERNET_BROADCAST_FRAMES_XMIT 0x00040000 #define USB_CDC_ETHERNET_DIRECTED_BYTES_RCV 0x00080000 #define USB_CDC_ETHERNET_DIRECTED_FRAMES_RCV 0x00100000 #define USB_CDC_ETHERNET_MULTICAST_BYTES_RCV 0x00200000 #define USB_CDC_ETHERNET_MULTICAST_FRAMES_RCV 0x00400000 #define USB_CDC_ETHERNET_BROADCAST_BYTES_RCV 0x00800000 #define USB_CDC_ETHERNET_BROADCAST_FRAMES_RCV 0x00000100 #define USB_CDC_ETHERNET_RCV_CRC_ERROR 0x00000200 #define USB_CDC_ETHERNET_TRANSMIT_QUEUE_LENGTH 0x00000400 #define USB_CDC_ETHERNET_RCV_ERROR_ALIGNMENT 0x00000800 #define USB_CDC_ETHERNET_XMIT_ONE_COLLISION 0x00001000 #define USB_CDC_ETHERNET_XMIT_MORE_COLLISIONS 0x00002000 #define USB_CDC_ETHERNET_XMIT_DEFERRED 0x00004000 #define USB_CDC_ETHERNET_XMIT_MAX_COLLISIONS 0x00008000 #define USB_CDC_ETHERNET_RCV_OVERRUN 0x00000001 #define USB_CDC_ETHERNET_XMIT_UNDERRUN 0x00000002 #define USB_CDC_ETHERNET_XMIT_HEARTBEAT_FAILURE 0x00000004 #define USB_CDC_ETHERNET_XMIT_TIMES_CRS_LOST 0x00000008 #define USB_CDC_ETHERNET_XMIT_LATE_COLLISIONS 0x00000010 //***************************************************************************** // // USB_CDC_FD_SUBTYPE_ATM, ATM Networking functional descriptor, // bmDataCapabilities // //***************************************************************************** #define USB_CDC_ATM_TYPE_3 0x08 #define USB_CDC_ATM_TYPE_2 0x04 #define USB_CDC_ATM_TYPE_1 0x02 //***************************************************************************** // // bmATMDeviceStatistics // //***************************************************************************** #define USB_CDC_ATM_VC_US_CELLS_SENT 0x10 #define USB_CDC_ATM_VC_US_CELLS_RECEIVED 0x08 #define USB_CDC_ATM_DS_CELLS_HEC_ERR_CORRECTED 0x04 #define USB_CDC_ATM_US_CELLS_SENT 0x02 #define USB_CDC_ATM_US_CELLS_RECEIVED 0x01 //***************************************************************************** // // Management Element Requests (provided in tUSBRequest.ucRequest) // //***************************************************************************** #define USB_CDC_SEND_ENCAPSULATED_COMMAND 0x00 #define USB_CDC_GET_ENCAPSULATED_RESPONSE 0x01 #define USB_CDC_SET_COMM_FEATURE 0x02 #define USB_CDC_GET_COMM_FEATURE 0x03 #define USB_CDC_CLEAR_COMM_FEATURE 0x04 #define USB_CDC_SET_AUX_LINE_STATE 0x10 #define USB_CDC_SET_HOOK_STATE 0x11 #define USB_CDC_PULSE_SETUP 0x12 #define USB_CDC_SEND_PULSE 0x13 #define USB_CDC_SET_PULSE_TIME 0x14 #define USB_CDC_RING_AUX_JACK 0x15 #define USB_CDC_SET_LINE_CODING 0x20 #define USB_CDC_GET_LINE_CODING 0x21 #define USB_CDC_SET_CONTROL_LINE_STATE 0x22 #define USB_CDC_SEND_BREAK 0x23 #define USB_CDC_SET_RINGER_PARMS 0x30 #define USB_CDC_GET_RINGER_PARMS 0x31 #define USB_CDC_SET_OPERATION_PARMS 0x32 #define USB_CDC_GET_OPERATION_PARMS 0x33 #define USB_CDC_SET_LINE_PARMS 0x34 #define USB_CDC_GET_LINE_PARMS 0x35 #define USB_CDC_DIAL_DIGITS 0x36 #define USB_CDC_SET_UNIT_PARAMETER 0x37 #define USB_CDC_GET_UNIT_PARAMETER 0x38 #define USB_CDC_CLEAR_UNIT_PARAMETER 0x39 #define USB_CDC_GET_PROFILE 0x3A #define USB_CDC_SET_ETHERNET_MULTICAST_FILTERS 0x40 #define USB_CDC_SET_ETHERNET_POWER_MANAGEMENT_PATTERN_FILTER 0x41 #define USB_CDC_GET_ETHERNET_POWER_MANAGEMENT_PATTERN_FILTER 0x42 #define USB_CDC_SET_ETHERNET_PACKET_FILTER 0x43 #define USB_CDC_GET_ETHERNET_STATISTIC 0x44 #define USB_CDC_SET_ATM_DATA_FORMAT 0x50 #define USB_CDC_GET_ATM_DEVICE_STATISTICS 0x51 #define USB_CDC_SET_ATM_DEFAULT_VC 0x52 #define USB_CDC_GET_ATM_VC_STATISTICS 0x53 //***************************************************************************** // // In cases where a request defined above results in the return of a fixed size // data block, the following group of labels define the size of that block. In // each of these cases, an access macro is also provided to write the response // data into an appropriately-sized array of uint8acters. // //***************************************************************************** #define USB_CDC_SIZE_COMM_FEATURE 2 #define USB_CDC_SIZE_LINE_CODING 7 #define USB_CDC_SIZE_RINGER_PARMS 4 #define USB_CDC_SIZE_OPERATION_PARMS 2 #define USB_CDC_SIZE_UNIT_PARAMETER 2 #define USB_CDC_SIZE_PROFILE 64 #define USB_CDC_SIZE_ETHERNET_POWER_MANAGEMENT_PATTERN_FILTER 2 #define USB_CDC_SIZE_ETHERNET_STATISTIC 4 #define USB_CDC_SIZE_ATM_DEVICE_STATISTICS 4 #define USB_CDC_SIZE_ATM_VC_STATISTICS 4 #define USB_CDC_SIZE_LINE_PARMS 10 //***************************************************************************** // // NB: USB_CDC_SIZE_LINE_PARAMS assumes only a single call. For multiple // calls, add 4 bytes per additional call. // //***************************************************************************** //***************************************************************************** // // USB_CDC_GET_COMM_FEATURE & USB_CDC_SET_COMM_FEATURE // //***************************************************************************** //***************************************************************************** // // wValue (Feature Selector) // //***************************************************************************** #define USB_CDC_ABSTRACT_STATE 0x0001 #define USB_CDC_COUNTRY_SETTING 0x0002 //***************************************************************************** // // Data when feature selector is USB_DCD_ABSTRACT_STATE // //***************************************************************************** #define USB_CDC_ABSTRACT_CALL_DATA_MULTIPLEXED 0x0002 #define USB_CDC_ABSTRACT_ENDPOINTS_IDLE 0x0001 //***************************************************************************** // // Macros to populate the response data buffer (whose size in bytes is defined // by USB_CDC_SIZE_COMM_FEATURE). // //***************************************************************************** #define SetResponseCommFeature(pcBuf, usData) \ do \ { \ (*(uint16 *)(pcBuf)) = (usData); \ } \ while(0) //***************************************************************************** // // USB_CDC_SET_AUX_LINE_STATE, wValue // //***************************************************************************** #define USB_CDC_AUX_DISCONNECT 0x0000 #define USB_CDC_AUX_CONNECT 0x0001 //***************************************************************************** // // USB_CDC_SET_HOOK_STATE, wValue // //***************************************************************************** #define USB_CDC_ON_HOOK 0x0000 #define USB_CDC_OFF_HOOK 0x0001 #define USB_CDC_SNOOPING 0x0002 //***************************************************************************** // // USB_CDC_GET_LINE_CODING // //***************************************************************************** #define USB_CDC_STOP_BITS_1 0x00 #define USB_CDC_STOP_BITS_1_5 0x01 #define USB_CDC_STOP_BITS_2 0x02 #define USB_CDC_PARITY_NONE 0x00 #define USB_CDC_PARITY_ODD 0x01 #define USB_CDC_PARITY_EVEN 0x02 #define USB_CDC_PARITY_MARK 0x03 #define USB_CDC_PARITY_SPACE 0x04 //***************************************************************************** // // Macro to populate the response data buffer (whose size in bytes is defined // by USB_CDC_SIZE_LINE_CODING). // //***************************************************************************** #define SetResponseLineCoding(pcBuf, ucRate, ucStop, ucParity, ucDatabits) \ do \ { \ (*(uint32 *)(pcBuf)) = (ucRate); \ (*((uint8 *)(pcBuf) + 4)) = (ucStop); \ (*((uint8 *)(pcBuf) + 5)) = (ucParity); \ (*((uint8 *)(pcBuf) + 6)) = (ucDatabits); \ } \ while(0) //***************************************************************************** // // USB_CDC_SET_CONTROL_LINE_STATE, wValue // //***************************************************************************** #define USB_CDC_DEACTIVATE_CARRIER 0x00 #define USB_CDC_ACTIVATE_CARRIER 0x02 #define USB_CDC_DTE_NOT_PRESENT 0x00 #define USB_CDC_DTE_PRESENT 0x01 //***************************************************************************** // // USB_CDC_SET_RINGER_PARMS, USB_CDC_GET_RINGER_PARMS and // USB_CDC_GET_LINE_PARMS (ulRingerBmp) // //***************************************************************************** #define USB_CDC_RINGER_EXISTS 0x80000000 #define USB_CDC_RINGER_DOES_NOT_EXIST 0x00000000 //***************************************************************************** // // Macro to populate the response data buffer to USB_CDC_GET_RINGER_PARMS. // Parameter buf points to a buffer of size USB_CDC_SIZE_RINGER_PARMS bytes. // //***************************************************************************** #define SetResponseRingerParms(pcBuf, ucPattern, ucVolume, ulExists) \ do \ { \ *(uint32 *)(pcBuf) = ((ucPattern) + \ ((ucVolume & 0xFF) << 8) + \ (ulExists & USB_CDC_RINGER_EXISTS)); \ } \ while(0) //***************************************************************************** // // Macros to extract fields from the USB_CDC_SET_RINGER_PARMS data // //***************************************************************************** #define GetRingerVolume(pcData) (BYTE((pcData)+1)) #define GetRingerPattern(pcData) (BYTE(pcData)) #define GetRingerExists(pcData) ((LONG(pcData)) & USB_CDC_RINGER_EXISTS) //***************************************************************************** // // USB_CDC_SET_OPERATION_PARMS, wValue // //***************************************************************************** #define USB_CDC_SIMPLE_MODE 0x0000 #define USB_CDC_STANDALONE_MODE 0x0001 #define USB_CDC_HOST_CENTRIC_MODE 0x0002 //***************************************************************************** // // Macro to populate the response data buffer to USB_CDC_GET_OPERATION_PARMS. // Parameter buf points to a buffer of size USB_CDC_SIZE_OPERATION_PARMS // bytes. // //***************************************************************************** #define SetResponseOperationParms(pBbuf, usData) \ do \ { \ WORD(pcBuf) = (usData); \ } \ while(0) //***************************************************************************** // // USB_CDC_SET_LINE_PARMS, wParam - Line State Change // //***************************************************************************** #define USB_CDC_DROP_ACTIVE_CALL 0x0000 #define USB_CDC_START_NEW_CALL 0x0001 #define USB_CDC_APPLY_RINGING 0x0002 #define USB_CDC_REMOVE_RINGING 0x0003 #define USB_CDC_SWITCH_CALL 0x0004 //***************************************************************************** // // Line state bitmap in USB_CDC_GET_LINE_PARMS response // //***************************************************************************** #define USB_CDC_LINE_IS_ACTIVE 0x80000000 #define USB_CDC_LINE_IS_IDLE 0x00000000 #define USB_CDC_LINE_NO_ACTIVE_CALL 0x000000FF #define USB_CDC_CALL_ACTIVE 0x80000000 //***************************************************************************** // // Call state value definitions // //***************************************************************************** #define USB_CDC_CALL_IDLE 0x00000000 #define USB_CDC_CALL_TYPICAL_DIALTONE 0x00000001 #define USB_CDC_CALL_INTERRUPTED_DIALTONE 0x00000002 #define USB_CDC_CALL_DIALING 0x00000003 #define USB_CDC_CALL_RINGBACK 0x00000004 #define USB_CDC_CALL_CONNECTED 0x00000005 #define USB_CDC_CALL_INCOMING 0x00000006 //***************************************************************************** // // Call state change value definitions // //***************************************************************************** #define USB_CDC_CALL_STATE_IDLE 0x01 #define USB_CDC_CALL_STATE_DIALING 0x02 #define USB_CDC_CALL_STATE_RINGBACK 0x03 #define USB_CDC_CALL_STATE_CONNECTED 0x04 #define USB_CDC_CALL_STATE_INCOMING 0x05 //***************************************************************************** // // Extra byte of data describing the connection type for // USB_CDC_CALL_STATE_CONNECTED. // //***************************************************************************** #define USB_CDC_VOICE 0x00 #define USB_CDC_ANSWERING_MACHINE 0x01 #define USB_CDC_FAX 0x02 #define USB_CDC_MODEM 0x03 #define USB_CDC_UNKNOWN 0xFF //***************************************************************************** // // Macro to extract call index from request in cases where wParam is // USB_CDC_SWITCH_CALL. // //***************************************************************************** #define GetCallIndex(pcData) (BYTE(pcData)) //***************************************************************************** // // Macro to populate the CallState entries in response to request // USB_CDC_GET_LINE_PARMS. The ucIndex parameter is a zero based index // indicating which call entry in the pcBuf response buffer to fill in. Note // that pcBuf points to the first byte of the buffer (the wLength field). // //***************************************************************************** #define SetResponseCallState(pcBuf, ucIndex, ulActive, ucStateChange, \ ucState) \ do \ { \ (LONG((uint8 *)(pcBuf) + (10 + (4 * (ucIndex))))) = \ (((ulActive) & USB_CDC_CALL_IS_ACTIVE) + \ (((ucStateChange) & 0xFF) << 8) + \ ((ucState) & 0xFF)); \ } \ while(0) //***************************************************************************** // // Macro to populate the response data buffer (whose size in bytes is defined // by USB_CDC_SIZE_LINE_PARMS). Note that this macro only populates fields for // a single call. If multiple calls are being managed, additional 4 byte // fields must be appended to provide call state for each call after the first. // This may be done using the SetResponseCallState macro with the appropriate // call index supplied. // //***************************************************************************** #define SetResponseLineParms(pcBuf, usLength, \ ucRingPattern, ucRingVolume, ulRingExists, \ ulLineActive, ucLineCallIndex, \ ulCallActive, ucCallStateChange, ucCallState) \ do \ { \ (WORD(pcBuf)) = (usLength); \ SetResponseRingerParams(((uint8 *)(pcBuf) + 2), \ (ucRingPattern), (ucRingVolume), \ (ulRingExists)); \ (LONG((uint8 *)(pcBuf) + 6)) = \ (((ulLineActive) & USB_CDC_LINE_IS_ACTIVE) + \ ((ucLineCallIndex) & 0xFF)) ; \ SetResponseCallState((pcBuf), 0, (ulCallActive), \ (ucCallStateChange), (ucCallState)); \ } \ while(0) //***************************************************************************** // // Notification Element definitions // //***************************************************************************** #define USB_CDC_NOTIFY_NETWORK_CONNECTION 0x00 #define USB_CDC_NOTIFY_RESPONSE_AVAILABLE 0x01 #define USB_CDC_NOTIFY_AUX_JACK_HOOK_STATE 0x08 #define USB_CDC_NOTIFY_RING_DETECT 0x09 #define USB_CDC_NOTIFY_SERIAL_STATE 0x20 #define USB_CDC_NOTIFY_CALL_STATE_CHANGE 0x28 #define USB_CDC_NOTIFY_LINE_STATE_CHANGE 0x29 #define USB_CDC_NOTIFY_CONNECTION_SPEED_CHANGE 0x2A //***************************************************************************** // // USB_CDC_NOTIFY_NETWORK_CONNECTION, wValue // //***************************************************************************** #define USB_CDC_NETWORK_DISCONNECTED 0x0000 #define USB_CDC_NETWORK_CONNECTED 0x0001 //***************************************************************************** // // USB_CDC_NOTIFY_AUX_JACK_HOOK_STATE, wValue // //***************************************************************************** #define USB_CDC_AUX_JACK_ON_HOOK 0x0000 #define USB_CDC_AUX_JACK_OFF_HOOK 0x0001 //***************************************************************************** // // USB_CDC_NOTIFY_SERIAL_STATE, Data // //***************************************************************************** //***************************************************************************** // // Number of bytes of data returned alongside this notification. // //***************************************************************************** #define USB_CDC_NOTIFY_SERIAL_STATE_SIZE 2 #define USB_CDC_SERIAL_STATE_OVERRUN 0x0040 #define USB_CDC_SERIAL_STATE_PARITY 0x0020 #define USB_CDC_SERIAL_STATE_FRAMING 0x0010 #define USB_CDC_SERIAL_STATE_RING_SIGNAL 0x0008 #define USB_CDC_SERIAL_STATE_BREAK 0x0004 #define USB_CDC_SERIAL_STATE_TXCARRIER 0x0002 #define USB_CDC_SERIAL_STATE_RXCARRIER 0x0001 //***************************************************************************** // // USB_CDC_NOTIFY_CALL_STATE_CHANGE, wValue // // Call state values are defined above in the group beginning // USB_CDC_CALL_STATE_IDLE. Note that the data returned alongside this // notification are heavily dependent upon the call state being reported so no // specific lengths or access macros are provided here. // // Macro to construct the correct wValue for this notification given a state // and call index. // //***************************************************************************** #define SetNotifyCallStatewValue(psResult, ucCallState, ucIndex) \ do \ { \ (WORD(psResult)) = (((ucCallState) & 0xFF) + \ (((ucIndex) & 0xFF) << 8)); \ } \ while(0) //***************************************************************************** // // USB_CDC_NOTIFY_LINE_STATE_CHANGE, wValue // // Note that the data returned alongside this notification are heavily // dependent upon the call state being reported so no specific lengths or // access macros are provided here. // //***************************************************************************** #define USB_CDC_LINE_STATE_IDLE 0x0000 #define USB_CDC_LINE_STATE_HOLD 0x0001 #define USB_CDC_LINE_STATE_OFF_HOOK 0x0002 #define USB_CDC_LINE_STATE_ON_HOOK 0x0003 //***************************************************************************** // // USB_CDC_NOTIFY_CONNECTION_SPEED_CHANGE, Data // // Macro to populate the 8 byte data structure returned alongside this // notification. // //***************************************************************************** #define SetNotifyConnectionSpeedChange(pcBuf, ulUSBitRate, ulDSBitRate) \ do \ { \ LONG(pcBuf) = ulUSBitRate; \ LONG((uint8 *)(pcBuf) + 4) = ulDSBitRate; \ } \ while(0) //***************************************************************************** // // Packed structure definitions for request/response data blocks // //***************************************************************************** //***************************************************************************** // // All structures defined in this section of the header require byte packing of // fields. This is usually accomplished using the PACKED macro but, for IAR // Embedded Workbench, this requires a pragma. // //***************************************************************************** #if defined(ewarm) || defined(__IAR_SYSTEMS_ICC__) #pragma pack(1) #endif //***************************************************************************** // //! USB_CDC_GET/SET_LINE_CODING request-specific data. // //***************************************************************************** typedef struct { // //! The data terminal rate in bits per second. // uint32 ulRate; // //! The number of stop bits. Valid values are USB_CDC_STOP_BITS_1, //! USB_CDC_STOP_BITS_1_5 or USB_CDC_STOP_BITS_2 // uint8 ucStop; // //! The parity setting. Valid values are USB_CDC_PARITY_NONE, //! USB_CDC_PARITY_ODD, USB_CDC_PARITY_EVEN, USB_CDC_PARITY_MARK and //! USB_CDC_PARITY_SPACE. // uint8 ucParity; // //! The number of data bits per character. Valid values are 5, 6, 7 and 8 //! in this implementation. // uint8 ucDatabits; } PACKED tLineCoding; //***************************************************************************** // // Return to default packing when using the IAR Embedded Workbench compiler. // //***************************************************************************** #if defined(ewarm) || defined(__IAR_SYSTEMS_ICC__) #pragma pack() #endif //***************************************************************************** // // Close the Doxygen group. //! @} // //***************************************************************************** //***************************************************************************** // // Mark the end of the C bindings section for C++ compilers. // //***************************************************************************** #ifdef __cplusplus } #endif #endif // __USBCDC_H__