/* * Copyright (c) 2006-2021, RT-Thread Development Team * * SPDX-License-Identifier: Apache-2.0 * * Change Logs: * Date Author Notes * 2014-07-25 ArdaFu Port to TM4C129X */ /** * @file - tivaif.c * lwIP Ethernet interface for Stellaris LM4F Devices * */ /** * Copyright (c) 2001-2004 Swedish Institute of Computer Science. * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICui32AR PURPOSE ARE DISCLAIMED. IN NO EVENT * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY * OF SUCH DAMAGE. * * This file is part of the lwIP TCP/IP stack. * * Author: Adam Dunkels * */ /** * Copyright (c) 2008-2012 Texas Instruments Incorporated * * This file is derived from the ``ethernetif.c'' skeleton Ethernet network * interface driver for lwIP. * */ #include "lwip/opt.h" #include "lwip/def.h" #include "lwip/mem.h" #include "lwip/pbuf.h" #include "lwip/sys.h" #include #include #include "lwip/tcpip.h" #include "netif/etharp.h" #include "netif/ppp_oe.h" /** * Sanity Check: This interface driver will NOT work if the following defines * are incorrect. * */ #if (PBUF_LINK_HLEN != 16) #error "PBUF_LINK_HLEN must be 16 for this interface driver!" #endif #if (ETH_PAD_SIZE != 0) #error "ETH_PAD_SIZE must be 0 for this interface driver!" #endif #if (!SYS_LIGHTWEIGHT_PROT) #error "SYS_LIGHTWEIGHT_PROT must be enabled for this interface driver!" #endif /** * Set the physical address of the PHY we will be using if this is not * specified in lwipopts.h. We assume 0 for the internal PHY. */ #ifndef PHY_PHYS_ADDR #define PHY_PHYS_ADDR 0 #endif #ifndef EMAC_PHY_CONFIG #define EMAC_PHY_CONFIG (EMAC_PHY_TYPE_INTERNAL | EMAC_PHY_INT_MDIX_EN | \ EMAC_PHY_AN_100B_T_FULL_DUPLEX) #endif /** * If necessary, set the defaui32t number of transmit and receive DMA descriptors * used by the Ethernet MAC. * */ #ifndef NUM_RX_DESCRIPTORS #define NUM_RX_DESCRIPTORS 4 #endif #ifndef NUM_TX_DESCRIPTORS #define NUM_TX_DESCRIPTORS 8 #endif /** * Setup processing for PTP (IEEE-1588). * */ #if LWIP_PTPD extern uint32_t g_ui32SysClk; extern uint32_t g_ui32PTPTickRate; extern void lwIPHostGetTime(u32_t *time_s, u32_t *time_ns); #endif /** * Stellaris DriverLib Header Files required for this interface driver. * */ #include #include #include "inc/hw_emac.h" #include "inc/hw_ints.h" #include "inc/hw_memmap.h" #include "inc/hw_types.h" #include "driverlib/emac.h" #include "driverlib/interrupt.h" #include "driverlib/sysctl.h" #include "driverlib/flash.h" #include "driverlib/interrupt.h" #include "driverlib/pin_map.h" #include "driverlib/rom_map.h" #include "driverlib/gpio.h" #include #include "lwipopts.h" #include "drv_eth.h" /** * A structure used to keep track of driver state and error counts. */ typedef struct { uint32_t ui32TXCount; uint32_t ui32TXCopyCount; uint32_t ui32TXCopyFailCount; uint32_t ui32TXNoDescCount; uint32_t ui32TXBufQueuedCount; uint32_t ui32TXBufFreedCount; uint32_t ui32RXBufReadCount; uint32_t ui32RXPacketReadCount; uint32_t ui32RXPacketErrCount; uint32_t ui32RXPacketCBErrCount; uint32_t ui32RXNoBufCount; } tDriverStats; tDriverStats g_sDriverStats; #ifdef DEBUG /** * Note: This rather weird construction where we invoke the macro with the * name of the field minus its Hungarian prefix is a workaround for a problem * experienced with GCC which does not like concatenating tokens after an * operator, specifically '.' or '->', in a macro. */ #define DRIVER_STATS_INC(x) do{ g_sDriverStats.ui32##x++; } while(0) #define DRIVER_STATS_DEC(x) do{ g_sDriverStats.ui32##x--; } while(0) #define DRIVER_STATS_ADD(x, inc) do{ g_sDriverStats.ui32##x += (inc); } while(0) #define DRIVER_STATS_SUB(x, dec) do{ g_sDriverStats.ui32##x -= (dec); } while(0) #else #define DRIVER_STATS_INC(x) #define DRIVER_STATS_DEC(x) #define DRIVER_STATS_ADD(x, inc) #define DRIVER_STATS_SUB(x, dec) #endif /** * Helper struct holding a DMA descriptor and the pbuf it currently refers * to. */ typedef struct { tEMACDMADescriptor Desc; struct pbuf *pBuf; } tDescriptor; typedef struct { tDescriptor *pDescriptors; uint32_t ui32NumDescs; uint32_t ui32Read; uint32_t ui32Write; } tDescriptorList; /** * Helper struct to hold private data used to operate your ethernet interface. * Keeping the ethernet address of the MAC in this struct is not necessary * as it is already kept in the struct netif. * But this is only an example, anyway... */ typedef struct { struct eth_addr *ethaddr; /* Add whatever per-interface state that is needed here. */ tDescriptorList *pTxDescList; tDescriptorList *pRxDescList; } tStellarisIF; /** * Global variable for this interface's private data. Needed to allow * the interrupt handlers access to this information outside of the * context of the lwIP netif. * */ tDescriptor g_pTxDescriptors[NUM_TX_DESCRIPTORS]; tDescriptor g_pRxDescriptors[NUM_RX_DESCRIPTORS]; tDescriptorList g_TxDescList = { g_pTxDescriptors, NUM_TX_DESCRIPTORS, 0, 0 }; tDescriptorList g_RxDescList = { g_pRxDescriptors, NUM_RX_DESCRIPTORS, 0, 0 }; static tStellarisIF g_StellarisIFData = { 0, &g_TxDescList, &g_RxDescList }; /** * Interrupt counters (for debug purposes). */ volatile uint32_t g_ui32NormalInts; volatile uint32_t g_ui32AbnormalInts; /** * A macro which determines whether a pointer is within the SRAM address * space and, hence, points to a buffer that the Ethernet MAC can directly * DMA from. */ #define PTR_SAFE_FOR_EMAC_DMA(ptr) (((uint32_t)(ptr) >= 0x2000000) && \ ((uint32_t)(ptr) < 0x20070000)) typedef struct { /* inherit from ethernet device */ struct eth_device parent; tStellarisIF* dma_if; /* for rx_thread async get pbuf */ rt_mailbox_t rx_pbuf_mb; } net_device; typedef net_device* net_device_t; static char rx_pbuf_mb_pool[8*4]; static struct rt_mailbox eth_rx_pbuf_mb; static net_device eth_dev_entry; static net_device_t eth_dev = ð_dev_entry; /** * Initialize the transmit and receive DMA descriptor lists. */ void InitDMADescriptors(void) { uint32_t ui32Loop; /* Transmit list - mark all descriptors as not owned by the hardware */ for(ui32Loop = 0; ui32Loop < NUM_TX_DESCRIPTORS; ui32Loop++) { g_pTxDescriptors[ui32Loop].pBuf = (struct pbuf *)0; g_pTxDescriptors[ui32Loop].Desc.ui32Count = 0; g_pTxDescriptors[ui32Loop].Desc.pvBuffer1 = 0; g_pTxDescriptors[ui32Loop].Desc.DES3.pLink = ((ui32Loop == (NUM_TX_DESCRIPTORS - 1)) ? &g_pTxDescriptors[0].Desc : &g_pTxDescriptors[ui32Loop + 1].Desc); g_pTxDescriptors[ui32Loop].Desc.ui32CtrlStatus = DES0_TX_CTRL_INTERRUPT | DES0_TX_CTRL_CHAINED | DES0_TX_CTRL_IP_ALL_CKHSUMS; } g_TxDescList.ui32Read = 0; g_TxDescList.ui32Write = 0; /* Receive list - tag each descriptor with a pbuf and set all fields to * allow packets to be received. */ for(ui32Loop = 0; ui32Loop < NUM_RX_DESCRIPTORS; ui32Loop++) { g_pRxDescriptors[ui32Loop].pBuf = pbuf_alloc(PBUF_RAW, PBUF_POOL_BUFSIZE, PBUF_POOL); g_pRxDescriptors[ui32Loop].Desc.ui32Count = DES1_RX_CTRL_CHAINED; if(g_pRxDescriptors[ui32Loop].pBuf) { /* Set the DMA to write directly into the pbuf payload. */ g_pRxDescriptors[ui32Loop].Desc.pvBuffer1 = g_pRxDescriptors[ui32Loop].pBuf->payload; g_pRxDescriptors[ui32Loop].Desc.ui32Count |= (g_pRxDescriptors[ui32Loop].pBuf->len << DES1_RX_CTRL_BUFF1_SIZE_S); g_pRxDescriptors[ui32Loop].Desc.ui32CtrlStatus = DES0_RX_CTRL_OWN; } else { LWIP_DEBUGF(NETIF_DEBUG, ("tivaif_init: pbuf_alloc error\n")); /* No pbuf available so leave the buffer pointer empty. */ g_pRxDescriptors[ui32Loop].Desc.pvBuffer1 = 0; g_pRxDescriptors[ui32Loop].Desc.ui32CtrlStatus = 0; } g_pRxDescriptors[ui32Loop].Desc.DES3.pLink = ((ui32Loop == (NUM_RX_DESCRIPTORS - 1)) ? &g_pRxDescriptors[0].Desc : &g_pRxDescriptors[ui32Loop + 1].Desc); } g_TxDescList.ui32Read = 0; g_TxDescList.ui32Write = 0; // // Set the descriptor pointers in the hardware. // EMACRxDMADescriptorListSet(EMAC0_BASE, &g_pRxDescriptors[0].Desc); EMACTxDMADescriptorListSet(EMAC0_BASE, &g_pTxDescriptors[0].Desc); } /** * In this function, the hardware should be initialized. * Called from tivaif_init(). * * @param netif the already initialized lwip network interface structure * for this ethernetif */ static void tivaif_hwinit(struct netif *psNetif) { uint16_t ui16Val; /* Initialize the DMA descriptors. */ InitDMADescriptors(); /* Clear any stray PHY interrupts that may be set. */ ui16Val = EMACPHYRead(EMAC0_BASE, PHY_PHYS_ADDR, EPHY_MISR1); ui16Val = EMACPHYRead(EMAC0_BASE, PHY_PHYS_ADDR, EPHY_MISR2); /* Configure and enable the link status change interrupt in the PHY. */ ui16Val = EMACPHYRead(EMAC0_BASE, PHY_PHYS_ADDR, EPHY_SCR); ui16Val |= (EPHY_SCR_INTEN_EXT | EPHY_SCR_INTOE_EXT); EMACPHYWrite(EMAC0_BASE, PHY_PHYS_ADDR, EPHY_SCR, ui16Val); EMACPHYWrite(EMAC0_BASE, PHY_PHYS_ADDR, EPHY_MISR1, (EPHY_MISR1_LINKSTATEN | EPHY_MISR1_SPEEDEN | EPHY_MISR1_DUPLEXMEN | EPHY_MISR1_ANCEN)); /* Read the PHY interrupt status to clear any stray events. */ ui16Val = EMACPHYRead(EMAC0_BASE, PHY_PHYS_ADDR, EPHY_MISR1); /** * Set MAC filtering options. We receive all broadcast and mui32ticast * packets along with those addressed specifically for us. */ EMACFrameFilterSet(EMAC0_BASE, (EMAC_FRMFILTER_HASH_AND_PERFECT | EMAC_FRMFILTER_PASS_MULTICAST)); #if LWIP_PTPD // // Enable timestamping on all received packets. // // We set the fine clock adjustment mode and configure the subsecond // increment to half the 25MHz PTPD clock. This will give us maximum control // over the clock rate adjustment and keep the arithmetic easy later. It // should be possible to synchronize with higher accuracy than this with // appropriate juggling of the subsecond increment count and the addend // register value, though. // EMACTimestampConfigSet(EMAC0_BASE, (EMAC_TS_ALL_RX_FRAMES | EMAC_TS_DIGITAL_ROLLOVER | EMAC_TS_PROCESS_IPV4_UDP | EMAC_TS_ALL | EMAC_TS_PTP_VERSION_1 | EMAC_TS_UPDATE_FINE), (1000000000 / (25000000 / 2))); EMACTimestampAddendSet(EMAC0_BASE, 0x80000000); EMACTimestampEnable(EMAC0_BASE); #endif /* Clear any pending MAC interrupts. */ EMACIntClear(EMAC0_BASE, EMACIntStatus(EMAC0_BASE, false)); /* Enable the Ethernet MAC transmitter and receiver. */ EMACTxEnable(EMAC0_BASE); EMACRxEnable(EMAC0_BASE); /* Enable the Ethernet RX and TX interrupt source. */ EMACIntEnable(EMAC0_BASE, (EMAC_INT_RECEIVE | EMAC_INT_TRANSMIT | EMAC_INT_TX_STOPPED | EMAC_INT_RX_NO_BUFFER | EMAC_INT_RX_STOPPED | EMAC_INT_PHY)); /* Enable the Ethernet interrupt. */ IntEnable(INT_EMAC0); /* Enable all processor interrupts. */ IntMasterEnable(); /* Tell the PHY to start an auto-negotiation cycle. */ EMACPHYWrite(EMAC0_BASE, PHY_PHYS_ADDR, EPHY_BMCR, (EPHY_BMCR_ANEN | EPHY_BMCR_RESTARTAN)); } #ifdef DEBUG /** * Dump the chain of pbuf pointers to the debug output. */ void tivaif_trace_pbuf(const char *pcTitle, struct pbuf *p) { LWIP_DEBUGF(NETIF_DEBUG, ("%s %08x (%d, %d)", pcTitle, p, p->tot_len, p->len)); do { p = p->next; if(p) { LWIP_DEBUGF(NETIF_DEBUG, ("->%08x(%d)", p, p->len)); } else { LWIP_DEBUGF(NETIF_DEBUG, ("->%08x", p)); } } while((p != NULL) && (p->tot_len != p->len)); LWIP_DEBUGF(NETIF_DEBUG, ("\n")); } #endif /** * This function is used to check whether a passed pbuf contains only buffers * resident in regions of memory that the Ethernet MAC can access. If any * buffers in the chain are outside a directly-DMAable section of memory, * the pbuf is copied to SRAM and a different pointer returned. If all * buffers are safe, the pbuf reference count is incremented and the original * pointer returned. */ static struct pbuf * tivaif_check_pbuf(struct pbuf *p) { struct pbuf *pBuf; rt_err_t Err; pBuf = p; #ifdef DEBUG tivaif_trace_pbuf("Original:", p); #endif /* Walk the list of buffers in the pbuf checking each. */ do { /* Does this pbuf's payload reside in memory that the Ethernet DMA * can access? */ if(!PTR_SAFE_FOR_EMAC_DMA(pBuf->payload)) { /* This buffer is outside the DMA-able memory space so we need * to copy the pbuf. */ pBuf = pbuf_alloc(PBUF_RAW, p->tot_len, PBUF_POOL); /* If we got a new pbuf... */ if(pBuf) { /* ...copy the old pbuf into the new one. */ Err = pbuf_copy(pBuf, p); /* If we failed to copy the pbuf, free the newly allocated one * and make sure we return a NULL to show a problem. */ if(Err != RT_EOK) { DRIVER_STATS_INC(TXCopyFailCount); pbuf_free(pBuf); pBuf = NULL; } else { #ifdef DEBUG tivaif_trace_pbuf("Copied:", pBuf); #endif DRIVER_STATS_INC(TXCopyCount); /* Reduce the reference count on the original pbuf since * we're not going to hold on to it after returning from * tivaif_transmit. Note that we already bumped * the reference count at the top of tivaif_transmit. */ pbuf_free(p); } } /* Send back the new pbuf pointer or NULL if an error occurred. */ return(pBuf); } /* Move on to the next buffer in the queue */ pBuf = pBuf->next; } while(pBuf); /** * If we get here, the passed pbuf can be safely used without needing to * be copied. */ return(p); } /** * This function should do the actual transmission of the packet. The packet is * contained in the pbuf that is passed to the function. This pbuf might be * chained. * * @param psNetif the lwip network interface structure for this ethernetif * @param p the MAC packet to send (e.g. IP packet including MAC addresses and type) * @return RT_EOK if the packet coui32d be sent * an err_t value if the packet coui32dn't be sent */ static rt_err_t tivaif_transmit(net_device_t dev, struct pbuf *p) { tStellarisIF *pIF; tDescriptor *pDesc; struct pbuf *pBuf; uint32_t ui32NumChained, ui32NumDescs; bool bFirst; SYS_ARCH_DECL_PROTECT(lev); LWIP_DEBUGF(NETIF_DEBUG, ("tivaif_transmit 0x%08x, len %d\n", p, p->tot_len)); /** * This entire function must run within a "critical section" to preserve * the integrity of the transmit pbuf queue. */ SYS_ARCH_PROTECT(lev); /* Update our transmit attempt counter. */ DRIVER_STATS_INC(TXCount); /** * Increase the reference count on the packet provided so that we can * hold on to it until we are finished transmitting its content. */ pbuf_ref(p); /** * Determine whether all buffers passed are within SRAM and, if not, copy * the pbuf into SRAM-resident buffers so that the Ethernet DMA can access * the data. */ p = tivaif_check_pbuf(p); /* Make sure we still have a valid buffer (it may have been copied) */ if(!p) { LINK_STATS_INC(link.memerr); SYS_ARCH_UNPROTECT(lev); return(-RT_ENOMEM); } /* Get our state data from the netif structure we were passed. */ //pIF = (tStellarisIF *)psNetif->state; pIF = dev->dma_if; /* Make sure that the transmit descriptors are not all in use */ pDesc = &(pIF->pTxDescList->pDescriptors[pIF->pTxDescList->ui32Write]); if(pDesc->pBuf) { /** * The current write descriptor has a pbuf attached to it so this * implies that the ring is fui32l. Reject this transmit request with a * memory error since we can't satisfy it just now. */ pbuf_free(p); LINK_STATS_INC(link.memerr); DRIVER_STATS_INC(TXNoDescCount); SYS_ARCH_UNPROTECT(lev); return (-RT_ENOMEM); } /* How many pbufs are in the chain passed? */ ui32NumChained = (uint32_t)pbuf_clen(p); /* How many free transmit descriptors do we have? */ ui32NumDescs = (pIF->pTxDescList->ui32Read > pIF->pTxDescList->ui32Write) ? (pIF->pTxDescList->ui32Read - pIF->pTxDescList->ui32Write) : ((NUM_TX_DESCRIPTORS - pIF->pTxDescList->ui32Write) + pIF->pTxDescList->ui32Read); /* Do we have enough free descriptors to send the whole packet? */ if(ui32NumDescs < ui32NumChained) { /* No - we can't transmit this whole packet so return an error. */ pbuf_free(p); LINK_STATS_INC(link.memerr); DRIVER_STATS_INC(TXNoDescCount); SYS_ARCH_UNPROTECT(lev); return (-RT_ENOMEM); } /* Tag the first descriptor as the start of the packet. */ bFirst = true; pDesc->Desc.ui32CtrlStatus = DES0_TX_CTRL_FIRST_SEG; /* Here, we know we can send the packet so write it to the descriptors */ pBuf = p; while(ui32NumChained) { /* Get a pointer to the descriptor we will write next. */ pDesc = &(pIF->pTxDescList->pDescriptors[pIF->pTxDescList->ui32Write]); /* Fill in the buffer pointer and length */ pDesc->Desc.ui32Count = (uint32_t)pBuf->len; pDesc->Desc.pvBuffer1 = pBuf->payload; /* Tag the first descriptor as the start of the packet. */ if(bFirst) { bFirst = false; pDesc->Desc.ui32CtrlStatus = DES0_TX_CTRL_FIRST_SEG; } else { pDesc->Desc.ui32CtrlStatus = 0; } #ifdef RT_LWIP_USING_HW_CHECKSUM pDesc->Desc.ui32CtrlStatus |= (DES0_TX_CTRL_IP_ALL_CKHSUMS | DES0_TX_CTRL_CHAINED); #else pDesc->Desc.ui32CtrlStatus |= (DES0_TX_CTRL_NO_CHKSUM | DES0_TX_CTRL_CHAINED); #endif /* Decrement our descriptor counter, move on to the next buffer in the * pbuf chain. */ ui32NumChained--; pBuf = pBuf->next; /* Update the descriptor list write index. */ pIF->pTxDescList->ui32Write++; if(pIF->pTxDescList->ui32Write == NUM_TX_DESCRIPTORS) { pIF->pTxDescList->ui32Write = 0; } /* If this is the last descriptor, mark it as the end of the packet. */ if(!ui32NumChained) { pDesc->Desc.ui32CtrlStatus |= (DES0_TX_CTRL_LAST_SEG | DES0_TX_CTRL_INTERRUPT); /* Tag the descriptor with the original pbuf pointer. */ pDesc->pBuf = p; } else { /* Set the lsb of the pbuf pointer. We use this as a signal that * we should not free the pbuf when we are walking the descriptor * list while processing the transmit interrupt. We only free the * pbuf when processing the last descriptor used to transmit its * chain. */ pDesc->pBuf = (struct pbuf *)((uint32_t)p + 1); } DRIVER_STATS_INC(TXBufQueuedCount); /* Hand the descriptor over to the hardware. */ pDesc->Desc.ui32CtrlStatus |= DES0_TX_CTRL_OWN; } /* Tell the transmitter to start (in case it had stopped). */ EMACTxDMAPollDemand(EMAC0_BASE); /* Update lwIP statistics */ LINK_STATS_INC(link.xmit); SYS_ARCH_UNPROTECT(lev); return(RT_EOK); } /** * This function will process all transmit descriptors and free pbufs attached * to any that have been transmitted since we last checked. * * This function is called only from the Ethernet interrupt handler. * * @param netif the lwip network interface structure for this ethernetif * @return None. */ static void tivaif_process_transmit(tStellarisIF *pIF) { tDescriptorList *pDescList; uint32_t ui32NumDescs; /* Get a pointer to the transmit descriptor list. */ pDescList = pIF->pTxDescList; /* Walk the list until we have checked all descriptors or we reach the * write pointer or find a descriptor that the hardware is still working * on. */ for(ui32NumDescs = 0; ui32NumDescs < pDescList->ui32NumDescs; ui32NumDescs++) { /* Has the buffer attached to this descriptor been transmitted? */ if(pDescList->pDescriptors[pDescList->ui32Read].Desc.ui32CtrlStatus & DES0_TX_CTRL_OWN) { /* No - we're finished. */ break; } /* Does this descriptor have a buffer attached to it? */ if(pDescList->pDescriptors[pDescList->ui32Read].pBuf) { /* Yes - free it if it's not marked as an intermediate pbuf */ if(!((uint32_t)(pDescList->pDescriptors[pDescList->ui32Read].pBuf) & 1)) { pbuf_free(pDescList->pDescriptors[pDescList->ui32Read].pBuf); DRIVER_STATS_INC(TXBufFreedCount); } pDescList->pDescriptors[pDescList->ui32Read].pBuf = NULL; } else { /* If the descriptor has no buffer, we are finished. */ break; } /* Move on to the next descriptor. */ pDescList->ui32Read++; if(pDescList->ui32Read == pDescList->ui32NumDescs) { pDescList->ui32Read = 0; } } } /** * This function will process all receive descriptors that contain newly read * data and pass complete frames up the lwIP stack as they are found. The * timestamp of the packet will be placed into the pbuf structure if PTPD is * enabled. * * This function is called only from the Ethernet interrupt handler. * * @param psNetif the lwip network interface structure for this ethernetif * @return None. */ static void tivaif_receive(net_device_t dev) { tDescriptorList *pDescList; tStellarisIF *pIF; struct pbuf *pBuf; uint32_t ui32DescEnd; /* Get a pointer to our state data */ pIF = dev->dma_if; /* Get a pointer to the receive descriptor list. */ pDescList = pIF->pRxDescList; /* Start with a NULL pbuf so that we don't try to link chain the first * time round. */ pBuf = NULL; /* Determine where we start and end our walk of the descriptor list */ ui32DescEnd = pDescList->ui32Read ? (pDescList->ui32Read - 1) : (pDescList->ui32NumDescs - 1); /* Step through the descriptors that are marked for CPU attention. */ while(pDescList->ui32Read != ui32DescEnd) { /* Does the current descriptor have a buffer attached to it? */ if(pDescList->pDescriptors[pDescList->ui32Read].pBuf) { /* Yes - determine if the host has filled it yet. */ if(pDescList->pDescriptors[pDescList->ui32Read].Desc.ui32CtrlStatus & DES0_RX_CTRL_OWN) { /* The DMA engine still owns the descriptor so we are finished */ break; } DRIVER_STATS_INC(RXBufReadCount); /* If this descriptor contains the end of the packet, fix up the * buffer size accordingly. */ if(pDescList->pDescriptors[pDescList->ui32Read].Desc.ui32CtrlStatus & DES0_RX_STAT_LAST_DESC) { /* This is the last descriptor for the frame so fix up the * length. It is safe for us to modify the internal fields * directly here (rather than calling pbuf_realloc) since we * know each of these pbufs is never chained. */ pDescList->pDescriptors[pDescList->ui32Read].pBuf->len = (pDescList->pDescriptors[pDescList->ui32Read].Desc.ui32CtrlStatus & DES0_RX_STAT_FRAME_LENGTH_M) >> DES0_RX_STAT_FRAME_LENGTH_S; pDescList->pDescriptors[pDescList->ui32Read].pBuf->tot_len = pDescList->pDescriptors[pDescList->ui32Read].pBuf->len; } if(pBuf) { /* Link this pbuf to the last one we looked at since this buffer * is a continuation of an existing frame (split across mui32tiple * pbufs). Note that we use pbuf_cat() here rather than * pbuf_chain() since we don't want to increase the reference * count of either pbuf - we only want to link them together. */ pbuf_cat(pBuf, pDescList->pDescriptors[pDescList->ui32Read].pBuf); pDescList->pDescriptors[pDescList->ui32Read].pBuf = pBuf; } /* Remember the buffer associated with this descriptor. */ pBuf = pDescList->pDescriptors[pDescList->ui32Read].pBuf; /* Is this the last descriptor for the current frame? */ if(pDescList->pDescriptors[pDescList->ui32Read].Desc.ui32CtrlStatus & DES0_RX_STAT_LAST_DESC) { /* Yes - does the frame contain errors? */ if(pDescList->pDescriptors[pDescList->ui32Read].Desc.ui32CtrlStatus & DES0_RX_STAT_ERR) { /* This is a bad frame so discard it and update the relevant * statistics. */ LWIP_DEBUGF(NETIF_DEBUG, ("tivaif_receive: packet error\n")); pbuf_free(pBuf); LINK_STATS_INC(link.drop); DRIVER_STATS_INC(RXPacketErrCount); } else { /* This is a good frame so pass it up the stack. */ LINK_STATS_INC(link.recv); DRIVER_STATS_INC(RXPacketReadCount); #if LWIP_PTPD /* Place the timestamp in the PBUF if PTPD is enabled */ pBuf->time_s = pDescList->pDescriptors[pDescList->ui32Read].Desc.ui32IEEE1588TimeHi; pBuf->time_ns = pDescList->pDescriptors[pDescList->ui32Read].Desc.ui32IEEE1588TimeLo; #endif #if NO_SYS if(ethernet_input(pBuf, psNetif) != RT_EOK) { #else //if(tcpip_input(pBuf, psNetif) != RT_EOK) if((rt_mb_send(dev->rx_pbuf_mb, (rt_uint32_t)pBuf) != RT_EOK) || (eth_device_ready(&(dev->parent)) != RT_EOK)) { #endif /* drop the packet */ LWIP_DEBUGF(NETIF_DEBUG, ("tivaif_input: input error\n")); pbuf_free(pBuf); /* Adjust the link statistics */ LINK_STATS_INC(link.memerr); LINK_STATS_INC(link.drop); DRIVER_STATS_INC(RXPacketCBErrCount); } /* We're finished with this packet so make sure we don't try * to link the next buffer to it. */ pBuf = NULL; } } } /* Allocate a new buffer for this descriptor */ pDescList->pDescriptors[pDescList->ui32Read].pBuf = pbuf_alloc(PBUF_RAW, PBUF_POOL_BUFSIZE, PBUF_POOL); pDescList->pDescriptors[pDescList->ui32Read].Desc.ui32Count = DES1_RX_CTRL_CHAINED; if(pDescList->pDescriptors[pDescList->ui32Read].pBuf) { /* We got a buffer so fill in the payload pointer and size. */ pDescList->pDescriptors[pDescList->ui32Read].Desc.pvBuffer1 = pDescList->pDescriptors[pDescList->ui32Read].pBuf->payload; pDescList->pDescriptors[pDescList->ui32Read].Desc.ui32Count |= (pDescList->pDescriptors[pDescList->ui32Read].pBuf->len << DES1_RX_CTRL_BUFF1_SIZE_S); /* Give this descriptor back to the hardware */ pDescList->pDescriptors[pDescList->ui32Read].Desc.ui32CtrlStatus = DES0_RX_CTRL_OWN; } else { LWIP_DEBUGF(NETIF_DEBUG, ("tivaif_receive: pbuf_alloc error\n")); pDescList->pDescriptors[pDescList->ui32Read].Desc.pvBuffer1 = 0; /* Update the stats to show we coui32dn't allocate a pbuf. */ DRIVER_STATS_INC(RXNoBufCount); LINK_STATS_INC(link.memerr); /* Stop parsing here since we can't leave a broken descriptor in * the chain. */ break; } /* Move on to the next descriptor in the chain, taking care to wrap. */ pDescList->ui32Read++; if(pDescList->ui32Read == pDescList->ui32NumDescs) { pDescList->ui32Read = 0; } } } /** * Process interrupts from the PHY. * * should be called from the Stellaris Ethernet Interrupt Handler. This * function will read packets from the Stellaris Ethernet fifo and place them * into a pbuf queue. If the transmitter is idle and there is at least one packet * on the transmit queue, it will place it in the transmit fifo and start the * transmitter. * */ void tivaif_process_phy_interrupt(net_device_t dev) { uint16_t ui16Val, ui16Status; uint32_t ui32Config, ui32Mode, ui32RxMaxFrameSize; /* Read the PHY interrupt status. This clears all interrupt sources. * Note that we are only enabling sources in EPHY_MISR1 so we don't * read EPHY_MISR2. */ ui16Val = EMACPHYRead(EMAC0_BASE, PHY_PHYS_ADDR, EPHY_MISR1); /* * Dummy read PHY REG EPHY_BMSR, it will force update the EPHY_STS register */ EMACPHYRead(EMAC0_BASE, PHY_PHYS_ADDR, EPHY_BMSR); /* Read the current PHY status. */ ui16Status = EMACPHYRead(EMAC0_BASE, PHY_PHYS_ADDR, EPHY_STS); /* Has the link status changed? */ if(ui16Val & EPHY_MISR1_LINKSTAT) { /* Is link up or down now? */ if(ui16Status & EPHY_STS_LINK) { /* Tell lwIP the link is up. */ #if NO_SYS netif_set_link_up(psNetif); #else //tcpip_callback((tcpip_callback_fn)netif_set_link_up, psNetif); eth_device_linkchange(&(dev->parent), RT_TRUE); #endif /* In this case we drop through since we may need to reconfigure * the MAC depending upon the speed and half/fui32l-duplex settings. */ } else { /* Tell lwIP the link is down */ #if NO_SYS netif_set_link_down(psNetif); #else //tcpip_callback((tcpip_callback_fn)netif_set_link_down, psNetif); eth_device_linkchange(&(dev->parent), RT_FALSE); #endif } } /* Has the speed or duplex status changed? */ if(ui16Val & (EPHY_MISR1_SPEED | EPHY_MISR1_SPEED | EPHY_MISR1_ANC)) { /* Get the current MAC configuration. */ EMACConfigGet(EMAC0_BASE, &ui32Config, &ui32Mode, &ui32RxMaxFrameSize); /* What speed is the interface running at now? */ if(ui16Status & EPHY_STS_SPEED) { /* 10Mbps is selected */ ui32Config &= ~EMAC_CONFIG_100MBPS; } else { /* 100Mbps is selected */ ui32Config |= EMAC_CONFIG_100MBPS; } /* Are we in fui32l- or half-duplex mode? */ if(ui16Status & EPHY_STS_DUPLEX) { /* Fui32l duplex. */ ui32Config |= EMAC_CONFIG_FULL_DUPLEX; } else { /* Half duplex. */ ui32Config &= ~EMAC_CONFIG_FULL_DUPLEX; } /* Reconfigure the MAC */ EMACConfigSet(EMAC0_BASE, ui32Config, ui32Mode, ui32RxMaxFrameSize); } } /** * Process tx and rx packets at the low-level interrupt. * * should be called from the Stellaris Ethernet Interrupt Handler. This * function will read packets from the Stellaris Ethernet fifo and place them * into a pbuf queue. If the transmitter is idle and there is at least one packet * on the transmit queue, it will place it in the transmit fifo and start the * transmitter. * */ void tivaif_interrupt(net_device_t dev, uint32_t ui32Status) { /* Update our debug interrupt counters. */ if(ui32Status & EMAC_INT_NORMAL_INT) { g_ui32NormalInts++; } if(ui32Status & EMAC_INT_ABNORMAL_INT) { g_ui32AbnormalInts++; } /* Is this an interrupt from the PHY? */ if(ui32Status & EMAC_INT_PHY) { tivaif_process_phy_interrupt(dev); } /* Process the transmit DMA list, freeing any buffers that have been * transmitted since our last interrupt. */ if(ui32Status & EMAC_INT_TRANSMIT) { tivaif_process_transmit(dev->dma_if); } /** * Process the receive DMA list and pass all successfui32ly received packets * up the stack. We also call this function in cases where the receiver has * stalled due to missing buffers since the receive function will attempt to * allocate new pbufs for descriptor entries which have none. */ if(ui32Status & (EMAC_INT_RECEIVE | EMAC_INT_RX_NO_BUFFER | EMAC_INT_RX_STOPPED)) { tivaif_receive(dev); } } #if NETIF_DEBUG /* Print an IP header by using LWIP_DEBUGF * @param p an IP packet, p->payload pointing to the IP header */ void tivaif_debug_print(struct pbuf *p) { struct eth_hdr *ethhdr = (struct eth_hdr *)p->payload; u16_t *plen = (u16_t *)p->payload; LWIP_DEBUGF(NETIF_DEBUG, ("ETH header:\n")); LWIP_DEBUGF(NETIF_DEBUG, ("Packet Length:%5"U16_F" \n",*plen)); LWIP_DEBUGF(NETIF_DEBUG, ("Destination: %02"X8_F"-%02"X8_F"-%02"X8_F"-%02"X8_F"-%02"X8_F"-%02"X8_F"\n", ethhdr->dest.addr[0], ethhdr->dest.addr[1], ethhdr->dest.addr[2], ethhdr->dest.addr[3], ethhdr->dest.addr[4], ethhdr->dest.addr[5])); LWIP_DEBUGF(NETIF_DEBUG, ("Source: %02"X8_F"-%02"X8_F"-%02"X8_F"-%02"X8_F"-%02"X8_F"-%02"X8_F"\n", ethhdr->src.addr[0], ethhdr->src.addr[1], ethhdr->src.addr[2], ethhdr->src.addr[3], ethhdr->src.addr[4], ethhdr->src.addr[5])); LWIP_DEBUGF(NETIF_DEBUG, ("Packet Type:0x%04"U16_F" \n", ethhdr->type)); } #endif /* NETIF_DEBUG */ void lwIPEthernetIntHandler(void) { uint32_t ui32Status; #ifdef DEF_INT_TEMPSTAMP uint32_t ui32TimerStatus; #endif // // Read and Clear the interrupt. // ui32Status = MAP_EMACIntStatus(EMAC0_BASE, true); // // If the interrupt really came from the Ethernet and not our // timer, clear it. // if(ui32Status) { MAP_EMACIntClear(EMAC0_BASE, ui32Status); } #ifdef DEF_INT_TEMPSTAMP // // Check to see whether a hardware timer interrupt has been reported. // if(ui32Status & EMAC_INT_TIMESTAMP) { // // Yes - read and clear the timestamp interrupt status. // ui32TimerStatus = EMACTimestampIntStatus(EMAC0_BASE); // // If a timer interrupt handler has been registered, call it. // if(g_pfnTimerHandler) { g_pfnTimerHandler(EMAC0_BASE, ui32TimerStatus); } } #endif // // The handling of the interrupt is different based on the use of a RTOS. // // // No RTOS is being used. If a transmit/receive interrupt was active, // run the low-level interrupt handler. // if(ui32Status) { tivaif_interrupt(eth_dev, ui32Status); } // // Service the lwIP timers. // //lwIPServiceTimers(); } // OUI:00-12-37 (hex) Texas Instruments, only for test static int tiva_eth_mac_addr_init(void) { int retVal =0; uint32_t ulUser[2]; uint8_t mac_addr[6]; MAP_FlashUserGet(&ulUser[0], &ulUser[1]); if((ulUser[0] == 0xffffffff) || (ulUser[1] == 0xffffffff)) { rt_kprintf("Fail to get mac address from eeprom.\n"); rt_kprintf("Using default mac address\n"); // OUI:00-12-37 (hex) Texas Instruments, only for test // Configure the hardware MAC address ulUser[0] = 0x00371200; ulUser[1] = 0x00563412; //FlashUserSet(ulUser0, ulUser1); retVal =-1; } //Convert the 24/24 split MAC address from NV ram into a 32/16 split MAC //address needed to program the hardware registers, then program the MAC //address into the Ethernet Controller registers. mac_addr[0] = ((ulUser[0] >> 0) & 0xff); mac_addr[1] = ((ulUser[0] >> 8) & 0xff); mac_addr[2] = ((ulUser[0] >> 16) & 0xff); mac_addr[3] = ((ulUser[1] >> 0) & 0xff); mac_addr[4] = ((ulUser[1] >> 8) & 0xff); mac_addr[5] = ((ulUser[1] >> 16) & 0xff); // // Program the hardware with its MAC address (for filtering). // MAP_EMACAddrSet(EMAC0_BASE, 0, mac_addr); return retVal; } void tiva_eth_lowlevel_init(void) { MAP_SysCtlPeripheralEnable(SYSCTL_PERIPH_GPIOF); // // PF1/PK4/PK6 are used for Ethernet LEDs. // MAP_GPIOPinConfigure(GPIO_PF0_EN0LED0); MAP_GPIOPinConfigure(GPIO_PF4_EN0LED1); GPIOPinTypeEthernetLED(GPIO_PORTF_BASE, GPIO_PIN_0); GPIOPinTypeEthernetLED(GPIO_PORTF_BASE, GPIO_PIN_4); // // Enable the ethernet peripheral. // MAP_SysCtlPeripheralEnable(SYSCTL_PERIPH_EMAC0); MAP_SysCtlPeripheralReset(SYSCTL_PERIPH_EMAC0); // // Enable the internal PHY if it's present and we're being // asked to use it. // if((EMAC_PHY_CONFIG & EMAC_PHY_TYPE_MASK) == EMAC_PHY_TYPE_INTERNAL) { // // We've been asked to configure for use with the internal // PHY. Is it present? // if(SysCtlPeripheralPresent(SYSCTL_PERIPH_EPHY0)) { // // Yes - enable and reset it. // MAP_SysCtlPeripheralEnable(SYSCTL_PERIPH_EPHY0); MAP_SysCtlPeripheralReset(SYSCTL_PERIPH_EPHY0); } else { // // Internal PHY is not present on this part so hang here. // rt_kprintf("Internal PHY is not present on this part.\n"); while(1) { } } } // // Wait for the MAC to come out of reset. // while(!MAP_SysCtlPeripheralReady(SYSCTL_PERIPH_EMAC0)) { } // // Configure for use with whichever PHY the user requires. // MAP_EMACPHYConfigSet(EMAC0_BASE, EMAC_PHY_CONFIG); // // Initialize the MAC and set the DMA mode. // MAP_EMACInit(EMAC0_BASE, 120000000, //system clock = 120MHz EMAC_BCONFIG_MIXED_BURST | EMAC_BCONFIG_PRIORITY_FIXED, 4, 4, 0); // // Set MAC configuration options. // MAP_EMACConfigSet(EMAC0_BASE, (EMAC_CONFIG_FULL_DUPLEX | EMAC_CONFIG_CHECKSUM_OFFLOAD | EMAC_CONFIG_7BYTE_PREAMBLE | EMAC_CONFIG_IF_GAP_96BITS | EMAC_CONFIG_USE_MACADDR0 | EMAC_CONFIG_SA_FROM_DESCRIPTOR | EMAC_CONFIG_BO_LIMIT_1024), (EMAC_MODE_RX_STORE_FORWARD | EMAC_MODE_TX_STORE_FORWARD | EMAC_MODE_TX_THRESHOLD_64_BYTES | EMAC_MODE_RX_THRESHOLD_64_BYTES), 0); EMACIntRegister(EMAC0_BASE, lwIPEthernetIntHandler); } static rt_err_t eth_dev_init(rt_device_t device) { net_device_t net_dev = (net_device_t)device; struct netif *psNetif = (net_dev->parent.netif); LWIP_ASSERT("psNetif != NULL", (psNetif != NULL)); #if LWIP_NETIF_HOSTNAME /* Initialize interface hostname */ psNetif->hostname = "t4mc"; #endif /* LWIP_NETIF_HOSTNAME */ /* * Initialize the snmp variables and counters inside the struct netif. * The last argument should be replaced with your link speed, in units * of bits per second. */ //NETIF_INIT_SNMP(psNetif, snmp_ifType_ethernet_csmacd, 1000000); net_dev->dma_if = &g_StellarisIFData; /* Remember our MAC address. */ g_StellarisIFData.ethaddr = (struct eth_addr *)&(psNetif->hwaddr[0]); /* Initialize the hardware */ tivaif_hwinit(psNetif); return RT_EOK; } /* control the interface */ static rt_err_t eth_dev_control(rt_device_t dev, int cmd, void *args) { switch(cmd) { case NIOCTL_GADDR: /* get mac address */ if(args) MAP_EMACAddrGet(EMAC0_BASE, 0, (uint8_t*)args); else return -RT_ERROR; break; default : break; } return RT_EOK; } /* Open the interface */ static rt_err_t eth_dev_open(rt_device_t dev, rt_uint16_t oflag) { return RT_EOK; } /* Close the interface */ static rt_err_t eth_dev_close(rt_device_t dev) { return RT_EOK; } /* Read */ static rt_size_t eth_dev_read(rt_device_t dev, rt_off_t pos, void* buffer, rt_size_t size) { rt_set_errno(-RT_ENOSYS); return 0; } /* Write */ static rt_size_t eth_dev_write(rt_device_t dev, rt_off_t pos, const void* buffer, rt_size_t size) { rt_set_errno(-RT_ENOSYS); return 0; } static rt_err_t eth_dev_tx(rt_device_t dev, struct pbuf *p) { return tivaif_transmit((net_device_t)dev, p); } static struct pbuf* eth_dev_rx(rt_device_t dev) { rt_err_t result; rt_uint32_t temp =0; net_device_t net_dev = (net_device_t)dev; result = rt_mb_recv(net_dev->rx_pbuf_mb, (rt_ubase_t *)&temp, RT_WAITING_NO); return (result == RT_EOK)? (struct pbuf*)temp : RT_NULL; } int rt_hw_tiva_eth_init(void) { rt_err_t result; /* Clock GPIO and etc */ tiva_eth_lowlevel_init(); tiva_eth_mac_addr_init(); /* init rt-thread device interface */ eth_dev->parent.parent.init = eth_dev_init; eth_dev->parent.parent.open = eth_dev_open; eth_dev->parent.parent.close = eth_dev_close; eth_dev->parent.parent.read = eth_dev_read; eth_dev->parent.parent.write = eth_dev_write; eth_dev->parent.parent.control = eth_dev_control; eth_dev->parent.eth_rx = eth_dev_rx; eth_dev->parent.eth_tx = eth_dev_tx; result = rt_mb_init(ð_rx_pbuf_mb, "epbuf", &rx_pbuf_mb_pool[0], sizeof(rx_pbuf_mb_pool)/4, RT_IPC_FLAG_FIFO); RT_ASSERT(result == RT_EOK); eth_dev->rx_pbuf_mb = ð_rx_pbuf_mb; result = eth_device_init(&(eth_dev->parent), "e0"); return result; } // eth_device_init using malloc // We use INIT_COMPONENT_EXPORT insted of INIT_BOARD_EXPORT INIT_COMPONENT_EXPORT(rt_hw_tiva_eth_init); #if 0 #ifdef RT_USING_FINSH #include "finsh.h" void PHY_Read(uint8_t addr) { uint16_t data = EMACPHYRead(EMAC0_BASE, PHY_PHYS_ADDR, addr); rt_kprintf("R PHY_REG[0x%02X] = 0x%04X\n", addr, data); } FINSH_FUNCTION_EXPORT(PHY_Read, (add)); void PHY_Write(uint8_t addr , uint16_t data) { EMACPHYWrite(EMAC0_BASE, PHY_PHYS_ADDR, addr, data); rt_kprintf("W PHY_REG[0x%02X] = 0x%04X\n", addr, data); } FINSH_FUNCTION_EXPORT(PHY_Write, (add, data)); void PHY_SetAdd(uint8_t addr0, uint8_t addr1, uint8_t addr2, uint8_t addr3, uint8_t addr4, uint8_t addr5) { uint32_t ulUser[2]; ulUser[0] = (((addr2<<8)|addr1)<<8)|addr0; ulUser[1] = (((addr5<<8)|addr4)<<8)|addr3; MAP_FlashUserSet(ulUser[0], ulUser[1]); MAP_FlashUserSave(); rt_kprintf("Save to EEPROM. please reboot."); } FINSH_FUNCTION_EXPORT(PHY_SetAdd, (add0-add5)); #endif //RT_USING_FINSH #endif