/* * The Clear BSD License * Copyright (c) 2015 - 2016, Freescale Semiconductor, Inc. * Copyright 2016-2017 NXP * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted (subject to the limitations in the disclaimer below) provided * that the following conditions are met: * * o Redistributions of source code must retain the above copyright notice, this list * of conditions and the following disclaimer. * * o Redistributions in binary form must reproduce the above copyright notice, this * list of conditions and the following disclaimer in the documentation and/or * other materials provided with the distribution. * * o Neither the name of the copyright holder nor the names of its * contributors may be used to endorse or promote products derived from this * software without specific prior written permission. * * NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED BY THIS LICENSE. * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #ifndef _FSL_ENET_H_ #define _FSL_ENET_H_ #include "fsl_common.h" #if defined(FSL_FEATURE_MEMORY_HAS_ADDRESS_OFFSET) && FSL_FEATURE_MEMORY_HAS_ADDRESS_OFFSET #include "fsl_memory.h" #endif /*! * @addtogroup enet * @{ */ /******************************************************************************* * Definitions ******************************************************************************/ /*! @name Driver version */ /*@{*/ /*! @brief Defines the driver version. */ #define FSL_ENET_DRIVER_VERSION (MAKE_VERSION(2, 2, 3)) /*!< Version 2.2.3. */ /*@}*/ /*! @name ENET DESCRIPTOR QUEUE */ /*@{*/ /*! @brief Defines the queue number. */ #ifndef FSL_FEATURE_ENET_QUEUE #define FSL_FEATURE_ENET_QUEUE 1 /* Singal queue for previous IP. */ #endif /*@}*/ /*! @name Control and status region bit masks of the receive buffer descriptor. */ /*@{*/ #define ENET_BUFFDESCRIPTOR_RX_EMPTY_MASK 0x8000U /*!< Empty bit mask. */ #define ENET_BUFFDESCRIPTOR_RX_SOFTOWNER1_MASK 0x4000U /*!< Software owner one mask. */ #define ENET_BUFFDESCRIPTOR_RX_WRAP_MASK 0x2000U /*!< Next buffer descriptor is the start address. */ #define ENET_BUFFDESCRIPTOR_RX_SOFTOWNER2_Mask 0x1000U /*!< Software owner two mask. */ #define ENET_BUFFDESCRIPTOR_RX_LAST_MASK 0x0800U /*!< Last BD of the frame mask. */ #define ENET_BUFFDESCRIPTOR_RX_MISS_MASK 0x0100U /*!< Received because of the promiscuous mode. */ #define ENET_BUFFDESCRIPTOR_RX_BROADCAST_MASK 0x0080U /*!< Broadcast packet mask. */ #define ENET_BUFFDESCRIPTOR_RX_MULTICAST_MASK 0x0040U /*!< Multicast packet mask. */ #define ENET_BUFFDESCRIPTOR_RX_LENVLIOLATE_MASK 0x0020U /*!< Length violation mask. */ #define ENET_BUFFDESCRIPTOR_RX_NOOCTET_MASK 0x0010U /*!< Non-octet aligned frame mask. */ #define ENET_BUFFDESCRIPTOR_RX_CRC_MASK 0x0004U /*!< CRC error mask. */ #define ENET_BUFFDESCRIPTOR_RX_OVERRUN_MASK 0x0002U /*!< FIFO overrun mask. */ #define ENET_BUFFDESCRIPTOR_RX_TRUNC_MASK 0x0001U /*!< Frame is truncated mask. */ /*@}*/ /*! @name Control and status bit masks of the transmit buffer descriptor. */ /*@{*/ #define ENET_BUFFDESCRIPTOR_TX_READY_MASK 0x8000U /*!< Ready bit mask. */ #define ENET_BUFFDESCRIPTOR_TX_SOFTOWENER1_MASK 0x4000U /*!< Software owner one mask. */ #define ENET_BUFFDESCRIPTOR_TX_WRAP_MASK 0x2000U /*!< Wrap buffer descriptor mask. */ #define ENET_BUFFDESCRIPTOR_TX_SOFTOWENER2_MASK 0x1000U /*!< Software owner two mask. */ #define ENET_BUFFDESCRIPTOR_TX_LAST_MASK 0x0800U /*!< Last BD of the frame mask. */ #define ENET_BUFFDESCRIPTOR_TX_TRANMITCRC_MASK 0x0400U /*!< Transmit CRC mask. */ /*@}*/ /* Extended control regions for enhanced buffer descriptors. */ #ifdef ENET_ENHANCEDBUFFERDESCRIPTOR_MODE /*! @name First extended control region bit masks of the receive buffer descriptor. */ /*@{*/ #define ENET_BUFFDESCRIPTOR_RX_IPV4_MASK 0x0001U /*!< Ipv4 frame mask. */ #define ENET_BUFFDESCRIPTOR_RX_IPV6_MASK 0x0002U /*!< Ipv6 frame mask. */ #define ENET_BUFFDESCRIPTOR_RX_VLAN_MASK 0x0004U /*!< VLAN frame mask. */ #define ENET_BUFFDESCRIPTOR_RX_PROTOCOLCHECKSUM_MASK 0x0010U /*!< Protocol checksum error mask. */ #define ENET_BUFFDESCRIPTOR_RX_IPHEADCHECKSUM_MASK 0x0020U /*!< IP header checksum error mask. */ /*@}*/ /*! @name Second extended control region bit masks of the receive buffer descriptor. */ /*@{*/ #define ENET_BUFFDESCRIPTOR_RX_INTERRUPT_MASK 0x0080U /*!< BD interrupt mask. */ #define ENET_BUFFDESCRIPTOR_RX_UNICAST_MASK 0x0100U /*!< Unicast frame mask. */ #define ENET_BUFFDESCRIPTOR_RX_COLLISION_MASK 0x0200U /*!< BD collision mask. */ #define ENET_BUFFDESCRIPTOR_RX_PHYERR_MASK 0x0400U /*!< PHY error mask. */ #define ENET_BUFFDESCRIPTOR_RX_MACERR_MASK 0x8000U /*!< Mac error mask. */ /*@}*/ /*! @name First extended control region bit masks of the transmit buffer descriptor. */ /*@{*/ #define ENET_BUFFDESCRIPTOR_TX_ERR_MASK 0x8000U /*!< Transmit error mask. */ #define ENET_BUFFDESCRIPTOR_TX_UNDERFLOWERR_MASK 0x2000U /*!< Underflow error mask. */ #define ENET_BUFFDESCRIPTOR_TX_EXCCOLLISIONERR_MASK 0x1000U /*!< Excess collision error mask. */ #define ENET_BUFFDESCRIPTOR_TX_FRAMEERR_MASK 0x0800U /*!< Frame error mask. */ #define ENET_BUFFDESCRIPTOR_TX_LATECOLLISIONERR_MASK 0x0400U /*!< Late collision error mask. */ #define ENET_BUFFDESCRIPTOR_TX_OVERFLOWERR_MASK 0x0200U /*!< Overflow error mask. */ #define ENET_BUFFDESCRIPTOR_TX_TIMESTAMPERR_MASK 0x0100U /*!< Timestamp error mask. */ /*@}*/ /*! @name Second extended control region bit masks of the transmit buffer descriptor. */ /*@{*/ #define ENET_BUFFDESCRIPTOR_TX_INTERRUPT_MASK 0x4000U /*!< Interrupt mask. */ #define ENET_BUFFDESCRIPTOR_TX_TIMESTAMP_MASK 0x2000U /*!< Timestamp flag mask. */ #if defined(FSL_FEATURE_ENET_HAS_AVB) && FSL_FEATURE_ENET_HAS_AVB #define ENET_BUFFDESCRIPTOR_TX_USETXLAUNCHTIME_MASK 0x0100U /*!< Use the transmit launch time. */ #define ENET_BUFFDESCRIPTOR_TX_FRAMETYPE_MASK 0x00F0U /*!< Frame type mask. */ #define ENET_BUFFDESCRIPTOR_TX_FRAMETYPE_SHIFT 4U /*!< Frame type shift. */ #define ENET_BD_FTYPE(n) ((n << ENET_BUFFDESCRIPTOR_TX_FRAMETYPE_SHIFT) & ENET_BUFFDESCRIPTOR_TX_FRAMETYPE_MASK) #endif /* FSL_FEATURE_ENET_HAS_AVB */ /*@}*/ #endif /* ENET_ENHANCEDBUFFERDESCRIPTOR_MODE */ /*! @brief Defines the receive error status flag mask. */ #define ENET_BUFFDESCRIPTOR_RX_ERR_MASK \ (ENET_BUFFDESCRIPTOR_RX_TRUNC_MASK | ENET_BUFFDESCRIPTOR_RX_OVERRUN_MASK | \ ENET_BUFFDESCRIPTOR_RX_LENVLIOLATE_MASK | ENET_BUFFDESCRIPTOR_RX_NOOCTET_MASK | ENET_BUFFDESCRIPTOR_RX_CRC_MASK) #ifdef ENET_ENHANCEDBUFFERDESCRIPTOR_MODE #define ENET_BUFFDESCRIPTOR_RX_EXT_ERR_MASK \ (ENET_BUFFDESCRIPTOR_RX_MACERR_MASK | ENET_BUFFDESCRIPTOR_RX_PHYERR_MASK | ENET_BUFFDESCRIPTOR_RX_COLLISION_MASK) #endif /*! @name Defines some Ethernet parameters. */ /*@{*/ #define ENET_FRAME_MAX_FRAMELEN 1518U /*!< Default maximum Ethernet frame size. */ #define ENET_FIFO_MIN_RX_FULL 5U /*!< ENET minimum receive FIFO full. */ #define ENET_RX_MIN_BUFFERSIZE 256U /*!< ENET minimum buffer size. */ #define ENET_PHY_MAXADDRESS (ENET_MMFR_PA_MASK >> ENET_MMFR_PA_SHIFT) #if FSL_FEATURE_ENET_QUEUE > 1 #define ENET_TX_INTERRUPT \ (kENET_TxFrameInterrupt | kENET_TxBufferInterrupt | kENET_TxFrame1Interrupt | kENET_TxBuffer1Interrupt | \ kENET_TxFrame2Interrupt | kENET_TxBuffer2Interrupt) #define ENET_RX_INTERRUPT \ (kENET_RxFrameInterrupt | kENET_RxBufferInterrupt | kENET_RxFrame1Interrupt | kENET_RxBuffer1Interrupt | \ kENET_RxFrame2Interrupt | kENET_RxBuffer2Interrupt) #else #define ENET_TX_INTERRUPT (kENET_TxFrameInterrupt | kENET_TxBufferInterrupt) #define ENET_RX_INTERRUPT (kENET_RxFrameInterrupt | kENET_RxBufferInterrupt) #endif /* FSL_FEATURE_ENET_QUEUE > 1 */ #define ENET_TS_INTERRUPT (kENET_TsTimerInterrupt | kENET_TsAvailInterrupt) #define ENET_ERR_INTERRUPT \ (kENET_BabrInterrupt | kENET_BabtInterrupt | kENET_EBusERInterrupt | kENET_LateCollisionInterrupt | \ kENET_RetryLimitInterrupt | kENET_UnderrunInterrupt | kENET_PayloadRxInterrupt) #define ENET_ERR_INTERRUPT \ (kENET_BabrInterrupt | kENET_BabtInterrupt | kENET_EBusERInterrupt | kENET_LateCollisionInterrupt | \ kENET_RetryLimitInterrupt | kENET_UnderrunInterrupt | kENET_PayloadRxInterrupt) /*@}*/ /*! @brief Defines the status return codes for transaction. */ enum _enet_status { kStatus_ENET_RxFrameError = MAKE_STATUS(kStatusGroup_ENET, 0U), /*!< A frame received but data error happen. */ kStatus_ENET_RxFrameFail = MAKE_STATUS(kStatusGroup_ENET, 1U), /*!< Failed to receive a frame. */ kStatus_ENET_RxFrameEmpty = MAKE_STATUS(kStatusGroup_ENET, 2U), /*!< No frame arrive. */ kStatus_ENET_TxFrameOverLen = MAKE_STATUS(kStatusGroup_ENET, 3U), /*!< Tx frame over length. */ kStatus_ENET_TxFrameBusy = MAKE_STATUS(kStatusGroup_ENET, 4U), /*!< Tx buffer descriptors are under process. */ kStatus_ENET_TxFrameFail = MAKE_STATUS(kStatusGroup_ENET, 5U) /*!< Transmit frame fail. */ #ifdef ENET_ENHANCEDBUFFERDESCRIPTOR_MODE , kStatus_ENET_PtpTsRingFull = MAKE_STATUS(kStatusGroup_ENET, 6U), /*!< Timestamp ring full. */ kStatus_ENET_PtpTsRingEmpty = MAKE_STATUS(kStatusGroup_ENET, 7U) /*!< Timestamp ring empty. */ #endif /* ENET_ENHANCEDBUFFERDESCRIPTOR_MODE */ }; /*! @brief Defines the MII/RMII/RGMII mode for data interface between the MAC and the PHY. */ typedef enum _enet_mii_mode { kENET_MiiMode = 0U, /*!< MII mode for data interface. */ kENET_RmiiMode = 1U, /*!< RMII mode for data interface. */ #if defined(FSL_FEATURE_ENET_HAS_AVB) && FSL_FEATURE_ENET_HAS_AVB kENET_RgmiiMode = 2U /*!< RGMII mode for data interface. */ #endif /* FSL_FEATURE_ENET_HAS_AVB */ } enet_mii_mode_t; /*! @brief Defines the 10/100/1000 Mbps speed for the MII data interface. * * Notice: "kENET_MiiSpeed1000M" only supported when mii mode is "kENET_RgmiiMode". */ typedef enum _enet_mii_speed { kENET_MiiSpeed10M = 0U, /*!< Speed 10 Mbps. */ kENET_MiiSpeed100M = 1U, /*!< Speed 100 Mbps. */ #if defined(FSL_FEATURE_ENET_HAS_AVB) && FSL_FEATURE_ENET_HAS_AVB kENET_MiiSpeed1000M = 2U /*!< Speed 1000M bps. */ #endif /* FSL_FEATURE_ENET_HAS_AVB */ } enet_mii_speed_t; /*! @brief Defines the half or full duplex for the MII data interface. */ typedef enum _enet_mii_duplex { kENET_MiiHalfDuplex = 0U, /*!< Half duplex mode. */ kENET_MiiFullDuplex /*!< Full duplex mode. */ } enet_mii_duplex_t; /*! @brief Define the MII opcode for normal MDIO_CLAUSES_22 Frame. */ typedef enum _enet_mii_write { kENET_MiiWriteNoCompliant = 0U, /*!< Write frame operation, but not MII-compliant. */ kENET_MiiWriteValidFrame /*!< Write frame operation for a valid MII management frame. */ } enet_mii_write_t; /*! @brief Defines the read operation for the MII management frame. */ typedef enum _enet_mii_read { kENET_MiiReadValidFrame = 2U, /*!< Read frame operation for a valid MII management frame. */ kENET_MiiReadNoCompliant = 3U /*!< Read frame operation, but not MII-compliant. */ } enet_mii_read_t; #if defined(FSL_FEATURE_ENET_HAS_EXTEND_MDIO) && FSL_FEATURE_ENET_HAS_EXTEND_MDIO /*! @brief Define the MII opcode for extended MDIO_CLAUSES_45 Frame. */ typedef enum _enet_mii_extend_opcode { kENET_MiiAddrWrite_C45 = 0U, /*!< Address Write operation. */ kENET_MiiWriteFrame_C45 = 1U, /*!< Write frame operation for a valid MII management frame. */ kENET_MiiReadFrame_C45 = 3U /*!< Read frame operation for a valid MII management frame. */ } enet_mii_extend_opcode; #endif /* FSL_FEATURE_ENET_HAS_EXTEND_MDIO */ /*! @brief Defines a special configuration for ENET MAC controller. * * These control flags are provided for special user requirements. * Normally, these control flags are unused for ENET initialization. * For special requirements, set the flags to * macSpecialConfig in the enet_config_t. * The kENET_ControlStoreAndFwdDisable is used to disable the FIFO store * and forward. FIFO store and forward means that the FIFO read/send is started * when a complete frame is stored in TX/RX FIFO. If this flag is set, * configure rxFifoFullThreshold and txFifoWatermark * in the enet_config_t. */ typedef enum _enet_special_control_flag { kENET_ControlFlowControlEnable = 0x0001U, /*!< Enable ENET flow control: pause frame. */ kENET_ControlRxPayloadCheckEnable = 0x0002U, /*!< Enable ENET receive payload length check. */ kENET_ControlRxPadRemoveEnable = 0x0004U, /*!< Padding is removed from received frames. */ kENET_ControlRxBroadCastRejectEnable = 0x0008U, /*!< Enable broadcast frame reject. */ kENET_ControlMacAddrInsert = 0x0010U, /*!< Enable MAC address insert. */ kENET_ControlStoreAndFwdDisable = 0x0020U, /*!< Enable FIFO store and forward. */ kENET_ControlSMIPreambleDisable = 0x0040U, /*!< Enable SMI preamble. */ kENET_ControlPromiscuousEnable = 0x0080U, /*!< Enable promiscuous mode. */ kENET_ControlMIILoopEnable = 0x0100U, /*!< Enable ENET MII loop back. */ kENET_ControlVLANTagEnable = 0x0200U, /*!< Enable normal VLAN (single vlan tag). */ #if defined(FSL_FEATURE_ENET_HAS_AVB) && FSL_FEATURE_ENET_HAS_AVB kENET_ControlSVLANEnable = 0x0400U, /*!< Enable S-VLAN. */ kENET_ControlVLANUseSecondTag = 0x0800U /*!< Enable extracting the second vlan tag for further processing. */ #endif /* FSL_FEATURE_ENET_HAS_AVB */ } enet_special_control_flag_t; /*! @brief List of interrupts supported by the peripheral. This * enumeration uses one-bot encoding to allow a logical OR of multiple * members. Members usually map to interrupt enable bits in one or more * peripheral registers. */ typedef enum _enet_interrupt_enable { kENET_BabrInterrupt = ENET_EIR_BABR_MASK, /*!< Babbling receive error interrupt source */ kENET_BabtInterrupt = ENET_EIR_BABT_MASK, /*!< Babbling transmit error interrupt source */ kENET_GraceStopInterrupt = ENET_EIR_GRA_MASK, /*!< Graceful stop complete interrupt source */ kENET_TxFrameInterrupt = ENET_EIR_TXF_MASK, /*!< TX FRAME interrupt source */ kENET_TxBufferInterrupt = ENET_EIR_TXB_MASK, /*!< TX BUFFER interrupt source */ kENET_RxFrameInterrupt = ENET_EIR_RXF_MASK, /*!< RX FRAME interrupt source */ kENET_RxBufferInterrupt = ENET_EIR_RXB_MASK, /*!< RX BUFFER interrupt source */ kENET_MiiInterrupt = ENET_EIR_MII_MASK, /*!< MII interrupt source */ kENET_EBusERInterrupt = ENET_EIR_EBERR_MASK, /*!< Ethernet bus error interrupt source */ kENET_LateCollisionInterrupt = ENET_EIR_LC_MASK, /*!< Late collision interrupt source */ kENET_RetryLimitInterrupt = ENET_EIR_RL_MASK, /*!< Collision Retry Limit interrupt source */ kENET_UnderrunInterrupt = ENET_EIR_UN_MASK, /*!< Transmit FIFO underrun interrupt source */ kENET_PayloadRxInterrupt = ENET_EIR_PLR_MASK, /*!< Payload Receive error interrupt source */ kENET_WakeupInterrupt = ENET_EIR_WAKEUP_MASK, /*!< WAKEUP interrupt source */ #if FSL_FEATURE_ENET_QUEUE > 1 kENET_RxFlush2Interrupt = ENET_EIR_RXFLUSH_2_MASK, /*!< Rx DMA ring2 flush indication. */ kENET_RxFlush1Interrupt = ENET_EIR_RXFLUSH_1_MASK, /*!< Rx DMA ring1 flush indication. */ kENET_RxFlush0Interrupt = ENET_EIR_RXFLUSH_0_MASK, /*!< RX DMA ring0 flush indication. */ kENET_TxFrame2Interrupt = ENET_EIR_TXF2_MASK, /*!< Tx frame interrupt for Tx ring/class 2. */ kENET_TxBuffer2Interrupt = ENET_EIR_TXB2_MASK, /*!< Tx buffer interrupt for Tx ring/class 2. */ kENET_RxFrame2Interrupt = ENET_EIR_RXF2_MASK, /*!< Rx frame interrupt for Rx ring/class 2. */ kENET_RxBuffer2Interrupt = ENET_EIR_RXB2_MASK, /*!< Rx buffer interrupt for Rx ring/class 2. */ kENET_TxFrame1Interrupt = ENET_EIR_TXF1_MASK, /*!< Tx frame interrupt for Tx ring/class 1. */ kENET_TxBuffer1Interrupt = ENET_EIR_TXB1_MASK, /*!< Tx buffer interrupt for Tx ring/class 1. */ kENET_RxFrame1Interrupt = ENET_EIR_RXF1_MASK, /*!< Rx frame interrupt for Rx ring/class 1. */ kENET_RxBuffer1Interrupt = ENET_EIR_RXB1_MASK, /*!< Rx buffer interrupt for Rx ring/class 1. */ #endif /* FSL_FEATURE_ENET_QUEUE > 1 */ kENET_TsAvailInterrupt = ENET_EIR_TS_AVAIL_MASK, /*!< TS AVAIL interrupt source for PTP */ kENET_TsTimerInterrupt = ENET_EIR_TS_TIMER_MASK /*!< TS WRAP interrupt source for PTP */ } enet_interrupt_enable_t; /*! @brief Defines the common interrupt event for callback use. */ typedef enum _enet_event { kENET_RxEvent, /*!< Receive event. */ kENET_TxEvent, /*!< Transmit event. */ kENET_ErrEvent, /*!< Error event: BABR/BABT/EBERR/LC/RL/UN/PLR . */ kENET_WakeUpEvent, /*!< Wake up from sleep mode event. */ kENET_TimeStampEvent, /*!< Time stamp event. */ kENET_TimeStampAvailEvent /*!< Time stamp available event.*/ } enet_event_t; #if defined(FSL_FEATURE_ENET_HAS_AVB) && FSL_FEATURE_ENET_HAS_AVB /*! @brief Defines certain idle slope for bandwidth fraction. */ typedef enum _enet_idle_slope { kENET_IdleSlope1 = 1U, /*!< The bandwidth fraction is about 0.002. */ kENET_IdleSlope2 = 2U, /*!< The bandwidth fraction is about 0.003. */ kENET_IdleSlope4 = 4U, /*!< The bandwidth fraction is about 0.008. */ kENET_IdleSlope8 = 8U, /*!< The bandwidth fraction is about 0.02. */ kENET_IdleSlope16 = 16U, /*!< The bandwidth fraction is about 0.03. */ kENET_IdleSlope32 = 32U, /*!< The bandwidth fraction is about 0.06. */ kENET_IdleSlope64 = 64U, /*!< The bandwidth fraction is about 0.11. */ kENET_IdleSlope128 = 128U, /*!< The bandwidth fraction is about 0.20. */ kENET_IdleSlope256 = 256U, /*!< The bandwidth fraction is about 0.33. */ kENET_IdleSlope384 = 384U, /*!< The bandwidth fraction is about 0.43. */ kENET_IdleSlope512 = 512U, /*!< The bandwidth fraction is about 0.50. */ kENET_IdleSlope640 = 640U, /*!< The bandwidth fraction is about 0.56. */ kENET_IdleSlope768 = 768U, /*!< The bandwidth fraction is about 0.60. */ kENET_IdleSlope896 = 896U, /*!< The bandwidth fraction is about 0.64. */ kENET_IdleSlope1024 = 1024U, /*!< The bandwidth fraction is about 0.67. */ kENET_IdleSlope1152 = 1152U, /*!< The bandwidth fraction is about 0.69. */ kENET_IdleSlope1280 = 1280U, /*!< The bandwidth fraction is about 0.71. */ kENET_IdleSlope1408 = 1408U, /*!< The bandwidth fraction is about 0.73. */ kENET_IdleSlope1536 = 1536U /*!< The bandwidth fraction is about 0.75. */ } enet_idle_slope_t; #endif /* FSL_FEATURE_ENET_HAS_AVB */ /*! @brief Defines the transmit accelerator configuration. */ typedef enum _enet_tx_accelerator { kENET_TxAccelIsShift16Enabled = ENET_TACC_SHIFT16_MASK, /*!< Transmit FIFO shift-16. */ kENET_TxAccelIpCheckEnabled = ENET_TACC_IPCHK_MASK, /*!< Insert IP header checksum. */ kENET_TxAccelProtoCheckEnabled = ENET_TACC_PROCHK_MASK /*!< Insert protocol checksum. */ } enet_tx_accelerator_t; /*! @brief Defines the receive accelerator configuration. */ typedef enum _enet_rx_accelerator { kENET_RxAccelPadRemoveEnabled = ENET_RACC_PADREM_MASK, /*!< Padding removal for short IP frames. */ kENET_RxAccelIpCheckEnabled = ENET_RACC_IPDIS_MASK, /*!< Discard with wrong IP header checksum. */ kENET_RxAccelProtoCheckEnabled = ENET_RACC_PRODIS_MASK, /*!< Discard with wrong protocol checksum. */ kENET_RxAccelMacCheckEnabled = ENET_RACC_LINEDIS_MASK, /*!< Discard with Mac layer errors. */ kENET_RxAccelisShift16Enabled = ENET_RACC_SHIFT16_MASK /*!< Receive FIFO shift-16. */ } enet_rx_accelerator_t; #ifdef ENET_ENHANCEDBUFFERDESCRIPTOR_MODE /*! @brief Defines the ENET PTP message related constant. */ typedef enum _enet_ptp_event_type { kENET_PtpEventMsgType = 3U, /*!< PTP event message type. */ kENET_PtpSrcPortIdLen = 10U, /*!< PTP message sequence id length. */ kENET_PtpEventPort = 319U, /*!< PTP event port number. */ kENET_PtpGnrlPort = 320U /*!< PTP general port number. */ } enet_ptp_event_type_t; /*! @brief Defines the IEEE 1588 PTP timer channel numbers. */ typedef enum _enet_ptp_timer_channel { kENET_PtpTimerChannel1 = 0U, /*!< IEEE 1588 PTP timer Channel 1. */ kENET_PtpTimerChannel2, /*!< IEEE 1588 PTP timer Channel 2. */ kENET_PtpTimerChannel3, /*!< IEEE 1588 PTP timer Channel 3. */ kENET_PtpTimerChannel4 /*!< IEEE 1588 PTP timer Channel 4. */ } enet_ptp_timer_channel_t; /*! @brief Defines the capture or compare mode for IEEE 1588 PTP timer channels. */ typedef enum _enet_ptp_timer_channel_mode { kENET_PtpChannelDisable = 0U, /*!< Disable timer channel. */ kENET_PtpChannelRisingCapture = 1U, /*!< Input capture on rising edge. */ kENET_PtpChannelFallingCapture = 2U, /*!< Input capture on falling edge. */ kENET_PtpChannelBothCapture = 3U, /*!< Input capture on both edges. */ kENET_PtpChannelSoftCompare = 4U, /*!< Output compare software only. */ kENET_PtpChannelToggleCompare = 5U, /*!< Toggle output on compare. */ kENET_PtpChannelClearCompare = 6U, /*!< Clear output on compare. */ kENET_PtpChannelSetCompare = 7U, /*!< Set output on compare. */ kENET_PtpChannelClearCompareSetOverflow = 10U, /*!< Clear output on compare, set output on overflow. */ kENET_PtpChannelSetCompareClearOverflow = 11U, /*!< Set output on compare, clear output on overflow. */ kENET_PtpChannelPulseLowonCompare = 14U, /*!< Pulse output low on compare for one IEEE 1588 clock cycle. */ kENET_PtpChannelPulseHighonCompare = 15U /*!< Pulse output high on compare for one IEEE 1588 clock cycle. */ } enet_ptp_timer_channel_mode_t; #endif /* ENET_ENHANCEDBUFFERDESCRIPTOR_MODE */ /*! @brief Defines the receive buffer descriptor structure for the little endian system.*/ typedef struct _enet_rx_bd_struct { uint16_t length; /*!< Buffer descriptor data length. */ uint16_t control; /*!< Buffer descriptor control and status. */ uint8_t *buffer; /*!< Data buffer pointer. */ #ifdef ENET_ENHANCEDBUFFERDESCRIPTOR_MODE uint16_t controlExtend0; /*!< Extend buffer descriptor control0. */ uint16_t controlExtend1; /*!< Extend buffer descriptor control1. */ uint16_t payloadCheckSum; /*!< Internal payload checksum. */ uint8_t headerLength; /*!< Header length. */ uint8_t protocolTyte; /*!< Protocol type. */ uint16_t reserved0; uint16_t controlExtend2; /*!< Extend buffer descriptor control2. */ uint32_t timestamp; /*!< Timestamp. */ uint16_t reserved1; uint16_t reserved2; uint16_t reserved3; uint16_t reserved4; #endif /* ENET_ENHANCEDBUFFERDESCRIPTOR_MODE */ } enet_rx_bd_struct_t; /*! @brief Defines the enhanced transmit buffer descriptor structure for the little endian system. */ typedef struct _enet_tx_bd_struct { uint16_t length; /*!< Buffer descriptor data length. */ uint16_t control; /*!< Buffer descriptor control and status. */ uint8_t *buffer; /*!< Data buffer pointer. */ #ifdef ENET_ENHANCEDBUFFERDESCRIPTOR_MODE uint16_t controlExtend0; /*!< Extend buffer descriptor control0. */ uint16_t controlExtend1; /*!< Extend buffer descriptor control1. */ #if defined(FSL_FEATURE_ENET_HAS_AVB) && FSL_FEATURE_ENET_HAS_AVB int8_t *txLaunchTime; /*!< Transmit launch time. */ #else uint16_t reserved0; uint16_t reserved1; #endif /* FSL_FEATURE_ENET_HAS_AVB */ uint16_t reserved2; uint16_t controlExtend2; /*!< Extend buffer descriptor control2. */ uint32_t timestamp; /*!< Timestamp. */ uint16_t reserved3; uint16_t reserved4; uint16_t reserved5; uint16_t reserved6; #endif /* ENET_ENHANCEDBUFFERDESCRIPTOR_MODE */ } enet_tx_bd_struct_t; /*! @brief Defines the ENET data error statistic structure. */ typedef struct _enet_data_error_stats { uint32_t statsRxLenGreaterErr; /*!< Receive length greater than RCR[MAX_FL]. */ uint32_t statsRxAlignErr; /*!< Receive non-octet alignment/ */ uint32_t statsRxFcsErr; /*!< Receive CRC error. */ uint32_t statsRxOverRunErr; /*!< Receive over run. */ uint32_t statsRxTruncateErr; /*!< Receive truncate. */ #ifdef ENET_ENHANCEDBUFFERDESCRIPTOR_MODE uint32_t statsRxProtocolChecksumErr; /*!< Receive protocol checksum error. */ uint32_t statsRxIpHeadChecksumErr; /*!< Receive IP header checksum error. */ uint32_t statsRxMacErr; /*!< Receive Mac error. */ uint32_t statsRxPhyErr; /*!< Receive PHY error. */ uint32_t statsRxCollisionErr; /*!< Receive collision. */ uint32_t statsTxErr; /*!< The error happen when transmit the frame. */ uint32_t statsTxFrameErr; /*!< The transmit frame is error. */ uint32_t statsTxOverFlowErr; /*!< Transmit overflow. */ uint32_t statsTxLateCollisionErr; /*!< Transmit late collision. */ uint32_t statsTxExcessCollisionErr; /*!< Transmit excess collision.*/ uint32_t statsTxUnderFlowErr; /*!< Transmit under flow error. */ uint32_t statsTxTsErr; /*!< Transmit time stamp error. */ #endif /* ENET_ENHANCEDBUFFERDESCRIPTOR_MODE */ } enet_data_error_stats_t; /*! @brief Defines the receive buffer descriptor configuration structure. * * Note that for the internal DMA requirements, the buffers have a corresponding alignment requirements. * 1. The aligned receive and transmit buffer size must be evenly divisible by ENET_BUFF_ALIGNMENT. * when the data buffers are in cacheable region when cache is enabled, all those size should be * aligned to the maximum value of "ENET_BUFF_ALIGNMENT" and the cache line size. * 2. The aligned transmit and receive buffer descriptor start address must be at * least 64 bit aligned. However, it's recommended to be evenly divisible by ENET_BUFF_ALIGNMENT. * buffer descriptors should be put in non-cacheable region when cache is enabled. * 3. The aligned transmit and receive data buffer start address must be evenly divisible by ENET_BUFF_ALIGNMENT. * Receive buffers should be continuous with the total size equal to "rxBdNumber * rxBuffSizeAlign". * Transmit buffers should be continuous with the total size equal to "txBdNumber * txBuffSizeAlign". * when the data buffers are in cacheable region when cache is enabled, all those size should be * aligned to the maximum value of "ENET_BUFF_ALIGNMENT" and the cache line size. */ typedef struct _enet_buffer_config { uint16_t rxBdNumber; /*!< Receive buffer descriptor number. */ uint16_t txBdNumber; /*!< Transmit buffer descriptor number. */ uint32_t rxBuffSizeAlign; /*!< Aligned receive data buffer size. */ uint32_t txBuffSizeAlign; /*!< Aligned transmit data buffer size. */ volatile enet_rx_bd_struct_t *rxBdStartAddrAlign; /*!< Aligned receive buffer descriptor start address: should be non-cacheable. */ volatile enet_tx_bd_struct_t *txBdStartAddrAlign; /*!< Aligned transmit buffer descriptor start address: should be non-cacheable. */ uint8_t *rxBufferAlign; /*!< Receive data buffer start address. */ uint8_t *txBufferAlign; /*!< Transmit data buffer start address. */ } enet_buffer_config_t; #ifdef ENET_ENHANCEDBUFFERDESCRIPTOR_MODE /*! @brief Defines the ENET PTP time stamp structure. */ typedef struct _enet_ptp_time { uint64_t second; /*!< Second. */ uint32_t nanosecond; /*!< Nanosecond. */ } enet_ptp_time_t; /*! @brief Defines the structure for the ENET PTP message data and timestamp data.*/ typedef struct _enet_ptp_time_data { uint8_t version; /*!< PTP version. */ uint8_t sourcePortId[kENET_PtpSrcPortIdLen]; /*!< PTP source port ID. */ uint16_t sequenceId; /*!< PTP sequence ID. */ uint8_t messageType; /*!< PTP message type. */ enet_ptp_time_t timeStamp; /*!< PTP timestamp. */ } enet_ptp_time_data_t; /*! @brief Defines the ENET PTP ring buffer structure for the PTP message timestamp store.*/ typedef struct _enet_ptp_time_data_ring { uint32_t front; /*!< The first index of the ring. */ uint32_t end; /*!< The end index of the ring. */ uint32_t size; /*!< The size of the ring. */ enet_ptp_time_data_t *ptpTsData; /*!< PTP message data structure. */ } enet_ptp_time_data_ring_t; /*! @brief Defines the ENET PTP configuration structure. */ typedef struct _enet_ptp_config { uint8_t ptpTsRxBuffNum; /*!< Receive 1588 timestamp buffer number*/ uint8_t ptpTsTxBuffNum; /*!< Transmit 1588 timestamp buffer number*/ enet_ptp_time_data_t *rxPtpTsData; /*!< The start address of 1588 receive timestamp buffers */ enet_ptp_time_data_t *txPtpTsData; /*!< The start address of 1588 transmit timestamp buffers */ enet_ptp_timer_channel_t channel; /*!< Used for ERRATA_2579: the PTP 1588 timer channel for time interrupt. */ uint32_t ptp1588ClockSrc_Hz; /*!< The clock source of the PTP 1588 timer. */ } enet_ptp_config_t; #endif /* ENET_ENHANCEDBUFFERDESCRIPTOR_MODE */ #if defined(FSL_FEATURE_ENET_HAS_INTERRUPT_COALESCE) && FSL_FEATURE_ENET_HAS_INTERRUPT_COALESCE /*! @brief Defines the interrupt coalescing configure structure. */ typedef struct _enet_intcoalesce_config { uint8_t txCoalesceFrameCount[FSL_FEATURE_ENET_QUEUE]; /*!< Transmit interrupt coalescing frame count threshold. */ uint16_t txCoalesceTimeCount[FSL_FEATURE_ENET_QUEUE]; /*!< Transmit interrupt coalescing timer count threshold. */ uint8_t rxCoalesceFrameCount[FSL_FEATURE_ENET_QUEUE]; /*!< Receive interrupt coalescing frame count threshold. */ uint16_t rxCoalesceTimeCount[FSL_FEATURE_ENET_QUEUE]; /*!< Receive interrupt coalescing timer count threshold. */ } enet_intcoalesce_config_t; #endif /* FSL_FEATURE_ENET_HAS_INTERRUPT_COALESCE */ #if defined(FSL_FEATURE_ENET_HAS_AVB) && FSL_FEATURE_ENET_HAS_AVB /*! @brief Defines the ENET AVB Configure structure. * * This is used for to configure the extended ring 1 and ring 2. * 1. The classification match format is (CMP3 << 12) | (CMP2 << 8) | (CMP1 << 4) | CMP0. * composed of four 3-bit compared VLAN priority field cmp0~cmp3, cm0 ~ cmp3 are used in parallel. * * If CMP1,2,3 are not unused, please set them to the same value as CMP0. * 2. The idleSlope is used to calculate the Band Width fraction, BW fraction = 1 / (1 + 512/idleSlope). * For avb configuration, the BW fraction of Class 1 and Class 2 combined must not exceed 0.75. */ typedef struct _enet_avb_config { uint16_t rxClassifyMatch[FSL_FEATURE_ENET_QUEUE - 1]; /*!< The classification match value for the ring. */ enet_idle_slope_t idleSlope[FSL_FEATURE_ENET_QUEUE - 1]; /*!< The idle slope for certian bandwidth fraction. */ } enet_avb_config_t; #endif /* FSL_FEATURE_ENET_HAS_AVB */ /*! @brief Defines the basic configuration structure for the ENET device. * * Note: * 1. macSpecialConfig is used for a special control configuration, A logical OR of * "enet_special_control_flag_t". For a special configuration for MAC, * set this parameter to 0. * 2. txWatermark is used for a cut-through operation. It is in steps of 64 bytes: * 0/1 - 64 bytes written to TX FIFO before transmission of a frame begins. * 2 - 128 bytes written to TX FIFO .... * 3 - 192 bytes written to TX FIFO .... * The maximum of txWatermark is 0x2F - 4032 bytes written to TX FIFO .... * txWatermark allows minimizing the transmit latency to set the txWatermark to 0 or 1 * or for larger bus access latency 3 or larger due to contention for the system bus. * 3. rxFifoFullThreshold is similar to the txWatermark for cut-through operation in RX. * It is in 64-bit words. The minimum is ENET_FIFO_MIN_RX_FULL and the maximum is 0xFF. * If the end of the frame is stored in FIFO and the frame size if smaller than the * txWatermark, the frame is still transmitted. The rule is the * same for rxFifoFullThreshold in the receive direction. * 4. When "kENET_ControlFlowControlEnable" is set in the macSpecialConfig, ensure * that the pauseDuration, rxFifoEmptyThreshold, and rxFifoStatEmptyThreshold * are set for flow control enabled case. * 5. When "kENET_ControlStoreAndFwdDisabled" is set in the macSpecialConfig, ensure * that the rxFifoFullThreshold and txFifoWatermark are set for store and forward disable. * 6. The rxAccelerConfig and txAccelerConfig default setting with 0 - accelerator * are disabled. The "enet_tx_accelerator_t" and "enet_rx_accelerator_t" are * recommended to be used to enable the transmit and receive accelerator. * After the accelerators are enabled, the store and forward feature should be enabled. * As a result, kENET_ControlStoreAndFwdDisabled should not be set. * 7. The intCoalesceCfg can be used in the rx or tx enabled cases to decrese the CPU loading. */ typedef struct _enet_config { uint32_t macSpecialConfig; /*!< Mac special configuration. A logical OR of "enet_special_control_flag_t". */ uint32_t interrupt; /*!< Mac interrupt source. A logical OR of "enet_interrupt_enable_t". */ uint16_t rxMaxFrameLen; /*!< Receive maximum frame length. */ enet_mii_mode_t miiMode; /*!< MII mode. */ enet_mii_speed_t miiSpeed; /*!< MII Speed. */ enet_mii_duplex_t miiDuplex; /*!< MII duplex. */ uint8_t rxAccelerConfig; /*!< Receive accelerator, A logical OR of "enet_rx_accelerator_t". */ uint8_t txAccelerConfig; /*!< Transmit accelerator, A logical OR of "enet_rx_accelerator_t". */ uint16_t pauseDuration; /*!< For flow control enabled case: Pause duration. */ uint8_t rxFifoEmptyThreshold; /*!< For flow control enabled case: when RX FIFO level reaches this value, it makes MAC generate XOFF pause frame. */ #if defined(FSL_FEATURE_ENET_HAS_RECEIVE_STATUS_THRESHOLD) && FSL_FEATURE_ENET_HAS_RECEIVE_STATUS_THRESHOLD uint8_t rxFifoStatEmptyThreshold; /*!< For flow control enabled case: number of frames in the receive FIFO, independent of size, that can be accept. If the limit is reached, reception continues and a pause frame is triggered. */ #endif /* FSL_FEATURE_ENET_HAS_RECEIVE_STATUS_THRESHOLD */ uint8_t rxFifoFullThreshold; /*!< For store and forward disable case, the data required in RX FIFO to notify the MAC receive ready status. */ uint8_t txFifoWatermark; /*!< For store and forward disable case, the data required in TX FIFO before a frame transmit start. */ #if defined(FSL_FEATURE_ENET_HAS_INTERRUPT_COALESCE) && FSL_FEATURE_ENET_HAS_INTERRUPT_COALESCE enet_intcoalesce_config_t *intCoalesceCfg; /* If the interrupt coalsecence is not required in the ring n(0,1,2), please set to NULL. */ #endif /* FSL_FEATURE_ENET_HAS_INTERRUPT_COALESCE */ uint8_t ringNum; /*!< Number of used rings. default with 1 -- single ring. */ } enet_config_t; /* Forward declaration of the handle typedef. */ typedef struct _enet_handle enet_handle_t; /*! @brief ENET callback function. */ #if FSL_FEATURE_ENET_QUEUE > 1 typedef void (*enet_callback_t)( ENET_Type *base, enet_handle_t *handle, uint32_t ringId, enet_event_t event, void *userData); #else typedef void (*enet_callback_t)(ENET_Type *base, enet_handle_t *handle, enet_event_t event, void *userData); #endif /* FSL_FEATURE_ENET_QUEUE > 1 */ /*! @brief Defines the ENET handler structure. */ struct _enet_handle { volatile enet_rx_bd_struct_t *rxBdBase[FSL_FEATURE_ENET_QUEUE]; /*!< Receive buffer descriptor base address pointer. */ volatile enet_rx_bd_struct_t *rxBdCurrent[FSL_FEATURE_ENET_QUEUE]; /*!< The current available receive buffer descriptor pointer. */ volatile enet_tx_bd_struct_t *txBdBase[FSL_FEATURE_ENET_QUEUE]; /*!< Transmit buffer descriptor base address pointer. */ volatile enet_tx_bd_struct_t *txBdCurrent[FSL_FEATURE_ENET_QUEUE]; /*!< The current available transmit buffer descriptor pointer. */ uint32_t rxBuffSizeAlign[FSL_FEATURE_ENET_QUEUE]; /*!< Receive buffer size alignment. */ uint32_t txBuffSizeAlign[FSL_FEATURE_ENET_QUEUE]; /*!< Transmit buffer size alignment. */ uint8_t ringNum; /*!< Number of used rings. */ enet_callback_t callback; /*!< Callback function. */ void *userData; /*!< Callback function parameter.*/ #ifdef ENET_ENHANCEDBUFFERDESCRIPTOR_MODE volatile enet_tx_bd_struct_t *txBdDirtyStatic[FSL_FEATURE_ENET_QUEUE]; /*!< The dirty transmit buffer descriptor for error static update. */ volatile enet_tx_bd_struct_t *txBdDirtyTime[FSL_FEATURE_ENET_QUEUE]; /*!< The dirty transmit buffer descriptor for time stamp update. */ uint64_t msTimerSecond; /*!< The second for Master PTP timer .*/ enet_ptp_time_data_ring_t rxPtpTsDataRing; /*!< Receive PTP 1588 time stamp data ring buffer. */ enet_ptp_time_data_ring_t txPtpTsDataRing; /*!< Transmit PTP 1588 time stamp data ring buffer. */ #endif /* ENET_ENHANCEDBUFFERDESCRIPTOR_MODE */ }; /******************************************************************************* * API ******************************************************************************/ #if defined(__cplusplus) extern "C" { #endif /*! * @name Initialization and De-initialization * @{ */ /*! * @brief Gets the ENET default configuration structure. * * The purpose of this API is to get the default ENET MAC controller * configure structure for ENET_Init(). User may use the initialized * structure unchanged in ENET_Init(), or modify some fields of the * structure before calling ENET_Init(). * Example: @code enet_config_t config; ENET_GetDefaultConfig(&config); @endcode * @param config The ENET mac controller configuration structure pointer. */ void ENET_GetDefaultConfig(enet_config_t *config); /*! * @brief Initializes the ENET module. * * This function ungates the module clock and initializes it with the ENET configuration. * * @param base ENET peripheral base address. * @param handle ENET handler pointer. * @param config ENET mac configuration structure pointer. * The "enet_config_t" type mac configuration return from ENET_GetDefaultConfig * can be used directly. It is also possible to verify the Mac configuration using other methods. * @param bufferConfig ENET buffer configuration structure pointer. * The buffer configuration should be prepared for ENET Initialization. * It is the start address of "ringNum" enet_buffer_config structures. * To support added multi-ring features in some soc and compatible with the previous * enet driver version. For single ring supported, this bufferConfig is a buffer * configure structure pointer, for multi-ring supported and used case, this bufferConfig * pointer should be a buffer configure structure array pointer. * @param macAddr ENET mac address of Ethernet device. This MAC address should be * provided. * @param srcClock_Hz The internal module clock source for MII clock. * * @note ENET has two buffer descriptors legacy buffer descriptors and * enhanced IEEE 1588 buffer descriptors. The legacy descriptor is used by default. To * use the IEEE 1588 feature, use the enhanced IEEE 1588 buffer descriptor * by defining "ENET_ENHANCEDBUFFERDESCRIPTOR_MODE" and calling ENET_Ptp1588Configure() * to configure the 1588 feature and related buffers after calling ENET_Init(). */ void ENET_Init(ENET_Type *base, enet_handle_t *handle, const enet_config_t *config, const enet_buffer_config_t *bufferConfig, uint8_t *macAddr, uint32_t srcClock_Hz); /*! * @brief Deinitializes the ENET module. * This function gates the module clock, clears ENET interrupts, and disables the ENET module. * * @param base ENET peripheral base address. */ void ENET_Deinit(ENET_Type *base); /*! * @brief Resets the ENET module. * * This function restores the ENET module to reset state. * Note that this function sets all registers to * reset state. As a result, the ENET module can't work after calling this function. * * @param base ENET peripheral base address. */ static inline void ENET_Reset(ENET_Type *base) { base->ECR |= ENET_ECR_RESET_MASK; } /* @} */ /*! * @name MII interface operation * @{ */ /*! * @brief Sets the ENET MII speed and duplex. * * This API is provided to dynamically change the speed and dulpex for MAC. * * @param base ENET peripheral base address. * @param speed The speed of the RMII mode. * @param duplex The duplex of the RMII mode. */ void ENET_SetMII(ENET_Type *base, enet_mii_speed_t speed, enet_mii_duplex_t duplex); /*! * @brief Sets the ENET SMI(serial management interface)- MII management interface. * * @param base ENET peripheral base address. * @param srcClock_Hz This is the ENET module clock frequency. Normally it's the system clock. See clock distribution. * @param isPreambleDisabled The preamble disable flag. * - true Enables the preamble. * - false Disables the preamble. */ void ENET_SetSMI(ENET_Type *base, uint32_t srcClock_Hz, bool isPreambleDisabled); /*! * @brief Gets the ENET SMI- MII management interface configuration. * * This API is used to get the SMI configuration to check whether the MII management * interface has been set. * * @param base ENET peripheral base address. * @return The SMI setup status true or false. */ static inline bool ENET_GetSMI(ENET_Type *base) { return (0 != (base->MSCR & 0x7E)); } /*! * @brief Reads data from the PHY register through an SMI interface. * * @param base ENET peripheral base address. * @return The data read from PHY */ static inline uint32_t ENET_ReadSMIData(ENET_Type *base) { return (uint32_t)((base->MMFR & ENET_MMFR_DATA_MASK) >> ENET_MMFR_DATA_SHIFT); } /*! * @brief Starts an SMI (Serial Management Interface) read command. * * Used for standard IEEE802.3 MDIO Clause 22 format. * * @param base ENET peripheral base address. * @param phyAddr The PHY address. * @param phyReg The PHY register. Range from 0 ~ 31. * @param operation The read operation. */ void ENET_StartSMIRead(ENET_Type *base, uint32_t phyAddr, uint32_t phyReg, enet_mii_read_t operation); /*! * @brief Starts an SMI write command. * * Used for standard IEEE802.3 MDIO Clause 22 format. * * @param base ENET peripheral base address. * @param phyAddr The PHY address. * @param phyReg The PHY register. Range from 0 ~ 31. * @param operation The write operation. * @param data The data written to PHY. */ void ENET_StartSMIWrite(ENET_Type *base, uint32_t phyAddr, uint32_t phyReg, enet_mii_write_t operation, uint32_t data); #if defined(FSL_FEATURE_ENET_HAS_EXTEND_MDIO) && FSL_FEATURE_ENET_HAS_EXTEND_MDIO /*! * @brief Starts the extended IEEE802.3 Clause 45 MDIO format SMI read command. * * @param base ENET peripheral base address. * @param phyAddr The PHY address. * @param phyReg The PHY register. For MDIO IEEE802.3 Clause 45, * the phyReg is a 21-bits combination of the devaddr (5 bits device address) * and the regAddr (16 bits phy register): phyReg = (devaddr << 16) | regAddr. */ void ENET_StartExtC45SMIRead(ENET_Type *base, uint32_t phyAddr, uint32_t phyReg); /*! * @brief Starts the extended IEEE802.3 Clause 45 MDIO format SMI write command. * * @param base ENET peripheral base address. * @param phyAddr The PHY address. * @param phyReg The PHY register. For MDIO IEEE802.3 Clause 45, * the phyReg is a 21-bits combination of the devaddr (5 bits device address) * and the regAddr (16 bits phy register): phyReg = (devaddr << 16) | regAddr. * @param data The data written to PHY. */ void ENET_StartExtC45SMIWrite(ENET_Type *base, uint32_t phyAddr, uint32_t phyReg, uint32_t data); #endif /* FSL_FEATURE_ENET_HAS_EXTEND_MDIO */ #if defined(FSL_FEATURE_ENET_HAS_AVB) && FSL_FEATURE_ENET_HAS_AVB /*! * @brief Control the usage of the delayed tx/rx RGMII clock. * * @param base ENET peripheral base address. * @param txEnabled Enable or disable to generate the delayed version of RGMII_TXC. * @param rxEnabled Enable or disable to use the delayed version of RGMII_RXC. */ static inline void ENET_SetRGMIIClockDelay(ENET_Type *base, bool txEnabled, bool rxEnabled) { uint32_t ecrReg = base->ECR; /* Set for transmit clock delay. */ if (txEnabled) { ecrReg |= ENET_ECR_TXC_DLY_MASK; } else { ecrReg &= ~ENET_ECR_TXC_DLY_MASK; } /* Set for receive clock delay. */ if (rxEnabled) { ecrReg |= ENET_ECR_RXC_DLY_MASK; } else { ecrReg &= ~ENET_ECR_RXC_DLY_MASK; } } #endif /* FSL_FEATURE_ENET_HAS_AVB */ /* @} */ /*! * @name MAC Address Filter * @{ */ /*! * @brief Sets the ENET module Mac address. * * @param base ENET peripheral base address. * @param macAddr The six-byte Mac address pointer. * The pointer is allocated by application and input into the API. */ void ENET_SetMacAddr(ENET_Type *base, uint8_t *macAddr); /*! * @brief Gets the ENET module Mac address. * * @param base ENET peripheral base address. * @param macAddr The six-byte Mac address pointer. * The pointer is allocated by application and input into the API. */ void ENET_GetMacAddr(ENET_Type *base, uint8_t *macAddr); /*! * @brief Adds the ENET device to a multicast group. * * @param base ENET peripheral base address. * @param address The six-byte multicast group address which is provided by application. */ void ENET_AddMulticastGroup(ENET_Type *base, uint8_t *address); /*! * @brief Moves the ENET device from a multicast group. * * @param base ENET peripheral base address. * @param address The six-byte multicast group address which is provided by application. */ void ENET_LeaveMulticastGroup(ENET_Type *base, uint8_t *address); /* @} */ /*! * @name Other basic operation * @{ */ #ifdef ENET_ENHANCEDBUFFERDESCRIPTOR_MODE #if defined(FSL_FEATURE_ENET_HAS_AVB) && FSL_FEATURE_ENET_HAS_AVB /*! * @brief Sets the ENET AVB feature. * * ENET AVB feature configuration, set the Receive classification match and transmit * bandwidth. This API is called when the AVB feature is required. * * Note: The AVB frames transmission scheme is credit-based tx scheme and it's only supported * with the Enhanced buffer descriptors. so the AVB configuration should only done with * Enhanced buffer descriptor. so when the AVB feature is required, please make sure the * the "ENET_ENHANCEDBUFFERDESCRIPTOR_MODE" is defined. * * @param base ENET peripheral base address. * @param handle ENET handler pointer. * @param config The ENET AVB feature configuration structure. */ void ENET_AVBConfigure(ENET_Type *base, enet_handle_t *handle, const enet_avb_config_t *config); #endif /* FSL_FEATURE_ENET_HAS_AVB */ #endif /* ENET_ENHANCEDBUFFERDESCRIPTOR_MODE */ /*! * @brief Activates ENET read or receive. * * This function is to active the enet read process. It is * used for single descriptor ring/queue. * * @param base ENET peripheral base address. * * @note This must be called after the MAC configuration and * state are ready. It must be called after the ENET_Init() and * ENET_Ptp1588Configure(). This should be called when the ENET receive required. */ static inline void ENET_ActiveRead(ENET_Type *base) { base->RDAR = ENET_RDAR_RDAR_MASK; } #if FSL_FEATURE_ENET_QUEUE > 1 /*! * @brief Activates ENET read or receive for multiple-queue/ring. * * This function is to active the enet read process. It is * used for extended multiple descriptor rings/queues. * * @param base ENET peripheral base address. * * @note This must be called after the MAC configuration and * state are ready. It must be called after the ENET_Init() and * ENET_Ptp1588Configure(). This should be called when the ENET receive required. */ static inline void ENET_ActiveReadMultiRing(ENET_Type *base) { base->RDAR = ENET_RDAR_RDAR_MASK; base->RDAR1 = ENET_RDAR1_RDAR_MASK; base->RDAR2 = ENET_RDAR2_RDAR_MASK; } #endif /* FSL_FEATURE_ENET_QUEUE > 1 */ /*! * @brief Enables/disables the MAC to enter sleep mode. * This function is used to set the MAC enter sleep mode. * When entering sleep mode, the magic frame wakeup interrupt should be enabled * to wake up MAC from the sleep mode and reset it to normal mode. * * @param base ENET peripheral base address. * @param enable True enable sleep mode, false disable sleep mode. */ static inline void ENET_EnableSleepMode(ENET_Type *base, bool enable) { if (enable) { /* When this field is set, MAC enters sleep mode. */ base->ECR |= ENET_ECR_SLEEP_MASK | ENET_ECR_MAGICEN_MASK; } else { /* MAC exits sleep mode. */ base->ECR &= ~(ENET_ECR_SLEEP_MASK | ENET_ECR_MAGICEN_MASK); } } /*! * @brief Gets ENET transmit and receive accelerator functions from MAC controller. * * @param base ENET peripheral base address. * @param txAccelOption The transmit accelerator option. The "enet_tx_accelerator_t" is * recommended to be used to as the mask to get the exact the accelerator option. * @param rxAccelOption The receive accelerator option. The "enet_rx_accelerator_t" is * recommended to be used to as the mask to get the exact the accelerator option. */ static inline void ENET_GetAccelFunction(ENET_Type *base, uint32_t *txAccelOption, uint32_t *rxAccelOption) { assert(txAccelOption); assert(txAccelOption); *txAccelOption = base->TACC; *rxAccelOption = base->RACC; } /* @} */ /*! * @name Interrupts. * @{ */ /*! * @brief Enables the ENET interrupt. * * This function enables the ENET interrupt according to the provided mask. The mask * is a logical OR of enumeration members. See @ref enet_interrupt_enable_t. * For example, to enable the TX frame interrupt and RX frame interrupt, do the following. * @code * ENET_EnableInterrupts(ENET, kENET_TxFrameInterrupt | kENET_RxFrameInterrupt); * @endcode * * @param base ENET peripheral base address. * @param mask ENET interrupts to enable. This is a logical OR of the * enumeration :: enet_interrupt_enable_t. */ static inline void ENET_EnableInterrupts(ENET_Type *base, uint32_t mask) { base->EIMR |= mask; } /*! * @brief Disables the ENET interrupt. * * This function disables the ENET interrupts according to the provided mask. The mask * is a logical OR of enumeration members. See @ref enet_interrupt_enable_t. * For example, to disable the TX frame interrupt and RX frame interrupt, do the following. * @code * ENET_DisableInterrupts(ENET, kENET_TxFrameInterrupt | kENET_RxFrameInterrupt); * @endcode * * @param base ENET peripheral base address. * @param mask ENET interrupts to disable. This is a logical OR of the * enumeration :: enet_interrupt_enable_t. */ static inline void ENET_DisableInterrupts(ENET_Type *base, uint32_t mask) { base->EIMR &= ~mask; } /*! * @brief Gets the ENET interrupt status flag. * * @param base ENET peripheral base address. * @return The event status of the interrupt source. This is the logical OR of members * of the enumeration :: enet_interrupt_enable_t. */ static inline uint32_t ENET_GetInterruptStatus(ENET_Type *base) { return base->EIR; } /*! * @brief Clears the ENET interrupt events status flag. * * This function clears enabled ENET interrupts according to the provided mask. The mask * is a logical OR of enumeration members. See the @ref enet_interrupt_enable_t. * For example, to clear the TX frame interrupt and RX frame interrupt, do the following. * @code * ENET_ClearInterruptStatus(ENET, kENET_TxFrameInterrupt | kENET_RxFrameInterrupt); * @endcode * * @param base ENET peripheral base address. * @param mask ENET interrupt source to be cleared. * This is the logical OR of members of the enumeration :: enet_interrupt_enable_t. */ static inline void ENET_ClearInterruptStatus(ENET_Type *base, uint32_t mask) { base->EIR = mask; } /* @} */ /*! * @name Transactional operation * @{ */ /*! * @brief Sets the callback function. * This API is provided for the application callback required case when ENET * interrupt is enabled. This API should be called after calling ENET_Init. * * @param handle ENET handler pointer. Should be provided by application. * @param callback The ENET callback function. * @param userData The callback function parameter. */ void ENET_SetCallback(enet_handle_t *handle, enet_callback_t callback, void *userData); /*! * @brief Gets the error statistics of a received frame for ENET single ring. * * This API must be called after the ENET_GetRxFrameSize and before the ENET_ReadFrame(). * If the ENET_GetRxFrameSize returns kStatus_ENET_RxFrameError, * the ENET_GetRxErrBeforeReadFrame can be used to get the exact error statistics. * This is an example. * @code * status = ENET_GetRxFrameSize(&g_handle, &length); * if (status == kStatus_ENET_RxFrameError) * { * // Get the error information of the received frame. * ENET_GetRxErrBeforeReadFrame(&g_handle, &eErrStatic); * // update the receive buffer. * ENET_ReadFrame(EXAMPLE_ENET, &g_handle, NULL, 0); * } * @endcode * @param handle The ENET handler structure pointer. This is the same handler pointer used in the ENET_Init. * @param eErrorStatic The error statistics structure pointer. */ void ENET_GetRxErrBeforeReadFrame(enet_handle_t *handle, enet_data_error_stats_t *eErrorStatic); #ifdef ENET_ENHANCEDBUFFERDESCRIPTOR_MODE /*! * @brief Gets the ENET transmit frame statistics after the data send for single ring. * * This interface gets the error statistics of the transmit frame. * Because the error information is reported by the uDMA after the data delivery, this interface * should be called after the data transmit API. It is recommended to call this function on * transmit interrupt handler. After calling the ENET_SendFrame, the * transmit interrupt notifies the transmit completion. * * @param handle The PTP handler pointer. This is the same handler pointer used in the ENET_Init. * @param eErrorStatic The error statistics structure pointer. * @return The execute status. */ status_t ENET_GetTxErrAfterSendFrame(enet_handle_t *handle, enet_data_error_stats_t *eErrorStatic); #endif /* ENET_ENHANCEDBUFFERDESCRIPTOR_MODE */ /*! * @brief Gets the size of the read frame for single ring. * * This function gets a received frame size from the ENET buffer descriptors. * @note The FCS of the frame is automatically removed by MAC and the size is the length without the FCS. * After calling ENET_GetRxFrameSize, ENET_ReadFrame() should be called to update the * receive buffers If the result is not "kStatus_ENET_RxFrameEmpty". * * @param handle The ENET handler structure. This is the same handler pointer used in the ENET_Init. * @param length The length of the valid frame received. * @retval kStatus_ENET_RxFrameEmpty No frame received. Should not call ENET_ReadFrame to read frame. * @retval kStatus_ENET_RxFrameError Data error happens. ENET_ReadFrame should be called with NULL data * and NULL length to update the receive buffers. * @retval kStatus_Success Receive a frame Successfully then the ENET_ReadFrame * should be called with the right data buffer and the captured data length input. */ status_t ENET_GetRxFrameSize(enet_handle_t *handle, uint32_t *length); /*! * @brief Reads a frame from the ENET device for single ring. * This function reads a frame (both the data and the length) from the ENET buffer descriptors. * The ENET_GetRxFrameSize should be used to get the size of the prepared data buffer. * This is an example: * @code * uint32_t length; * enet_handle_t g_handle; * //Get the received frame size firstly. * status = ENET_GetRxFrameSize(&g_handle, &length); * if (length != 0) * { * //Allocate memory here with the size of "length" * uint8_t *data = memory allocate interface; * if (!data) * { * ENET_ReadFrame(ENET, &g_handle, NULL, 0); * //Add the console warning log. * } * else * { * status = ENET_ReadFrame(ENET, &g_handle, data, length); * //Call stack input API to deliver the data to stack * } * } * else if (status == kStatus_ENET_RxFrameError) * { * //Update the received buffer when a error frame is received. * ENET_ReadFrame(ENET, &g_handle, NULL, 0); * } * @endcode * @param base ENET peripheral base address. * @param handle The ENET handler structure. This is the same handler pointer used in the ENET_Init. * @param data The data buffer provided by user to store the frame which memory size should be at least "length". * @param length The size of the data buffer which is still the length of the received frame. * @return The execute status, successful or failure. */ status_t ENET_ReadFrame(ENET_Type *base, enet_handle_t *handle, uint8_t *data, uint32_t length); /*! * @brief Transmits an ENET frame for single ring. * @note The CRC is automatically appended to the data. Input the data * to send without the CRC. * * * @param base ENET peripheral base address. * @param handle The ENET handler pointer. This is the same handler pointer used in the ENET_Init. * @param data The data buffer provided by user to be send. * @param length The length of the data to be send. * @retval kStatus_Success Send frame succeed. * @retval kStatus_ENET_TxFrameBusy Transmit buffer descriptor is busy under transmission. * The transmit busy happens when the data send rate is over the MAC capacity. * The waiting mechanism is recommended to be added after each call return with * kStatus_ENET_TxFrameBusy. */ status_t ENET_SendFrame(ENET_Type *base, enet_handle_t *handle, const uint8_t *data, uint32_t length); #if FSL_FEATURE_ENET_QUEUE > 1 /*! * @brief Gets the error statistics of received frame for extended multi-ring. * * This API must be called after the ENET_GetRxFrameSizeMultiRing and before the ENET_ReadFrameMultiRing(). * If the ENET_GetRxFrameSizeMultiRing returns kStatus_ENET_RxFrameError, * the ENET_GetRxErrBeforeReadFrameMultiRing can be used to get the exact error statistics. * * @param handle The ENET handler structure pointer. This is the same handler pointer used in the ENET_Init. * @param eErrorStatic The error statistics structure pointer. * @param ringId The ring index, range from 0 ~ FSL_FEATURE_ENET_QUEUE - 1. */ void ENET_GetRxErrBeforeReadFrameMultiRing(enet_handle_t *handle, enet_data_error_stats_t *eErrorStatic, uint32_t ringId); /*! * @brief Transmits an ENET frame for extended multi-ring. * @note The CRC is automatically appended to the data. Input the data * to send without the CRC. * * In this API, multiple-ring are mainly used for extended avb frames are supported. * The transmit scheme for avb frames is the credit-based scheme, the AVB class A, AVB class B * and the non-AVB frame are transmitted in ring 1, ring 2 and ring 0 independently. * So application should care about the transmit ring index when use multiple-ring transmission. * * @param base ENET peripheral base address. * @param handle The ENET handler pointer. This is the same handler pointer used in the ENET_Init. * @param data The data buffer provided by user to be send. * @param length The length of the data to be send. * @param ringId The ring index for transmission. * @retval kStatus_Success Send frame succeed. * @retval kStatus_ENET_TxFrameBusy Transmit buffer descriptor is busy under transmission. * The transmit busy happens when the data send rate is over the MAC capacity. * The waiting mechanism is recommended to be added after each call return with * kStatus_ENET_TxFrameBusy. */ status_t ENET_SendFrameMultiRing( ENET_Type *base, enet_handle_t *handle, uint8_t *data, uint32_t length, uint32_t ringId); #ifdef ENET_ENHANCEDBUFFERDESCRIPTOR_MODE /*! * @brief Gets the ENET transmit frame statistics after the data send for extended multi-ring. * * This interface gets the error statistics of the transmit frame. * Because the error information is reported by the uDMA after the data delivery, this interface * should be called after the data transmit API and shall be called by transmit interrupt handler. * After calling the ENET_SendFrame, the transmit interrupt notifies the transmit completion. * * @param handle The PTP handler pointer. This is the same handler pointer used in the ENET_Init. * @param eErrorStatic The error statistics structure pointer. * @param ringId The ring index. * @return The execute status. */ status_t ENET_GetTxErrAfterSendFrameMultiRing(enet_handle_t *handle, enet_data_error_stats_t *eErrorStatic, uint32_t ringId); #endif /* ENET_ENHANCEDBUFFERDESCRIPTOR_MODE */ /*! * @brief Gets the size of the read frame for extended mutli-ring. * * This function gets a received frame size from the ENET buffer descriptors. * @note The FCS of the frame is automatically removed by MAC and the size is the length without the FCS. * After calling ENET_GetRxFrameSizeMultiRing, ENET_ReadFrameMultiRing() should be called to update the * receive buffers If the result is not "kStatus_ENET_RxFrameEmpty". The usage is * the same to the single ring, refer to ENET_GetRxFrameSize. * * @param handle The ENET handler structure. This is the same handler pointer used in the ENET_Init. * @param length The length of the valid frame received. * @param ringId The ring index or ring number; * @retval kStatus_ENET_RxFrameEmpty No frame received. Should not call ENET_ReadFrameMultiRing to read frame. * @retval kStatus_ENET_RxFrameError Data error happens. ENET_ReadFrameMultiRing should be called with NULL data * and NULL length to update the receive buffers. * @retval kStatus_Success Receive a frame Successfully then the ENET_ReadFrame * should be called with the right data buffer and the captured data length input. */ status_t ENET_GetRxFrameSizeMultiRing(enet_handle_t *handle, uint32_t *length, uint32_t ringId); /*! * @brief Reads a frame from the ENET device for multi-ring. * * This function reads a frame (both the data and the length) from the ENET buffer descriptors. * The ENET_GetRxFrameSizeMultiRing should be used to get the size of the prepared data buffer. * This usage is the same as the single ring, refer to ENET_ReadFrame. * @param base ENET peripheral base address. * @param handle The ENET handler structure. This is the same handler pointer used in the ENET_Init. * @param data The data buffer provided by user to store the frame which memory size should be at least "length". * @param length The size of the data buffer which is still the length of the received frame. * @param ringId The ring index or ring number; * @return The execute status, successful or failure. */ status_t ENET_ReadFrameMultiRing( ENET_Type *base, enet_handle_t *handle, uint8_t *data, uint32_t length, uint32_t ringId); /*! * @brief The transmit IRQ handler. * * @param base ENET peripheral base address. * @param handle The ENET handler pointer. * @param ringId The ring id or ring number. */ void ENET_TransmitIRQHandler(ENET_Type *base, enet_handle_t *handle, uint32_t ringId); /*! * @brief The receive IRQ handler. * * @param base ENET peripheral base address. * @param handle The ENET handler pointer. * @param ringId The ring id or ring number. */ void ENET_ReceiveIRQHandler(ENET_Type *base, enet_handle_t *handle, uint32_t ringId); /*! * @brief the common IRQ handler for the tx/rx irq handler. * * This is used for the combined tx/rx interrupt for multi-ring (frame 1). * * @param base ENET peripheral base address. */ void ENET_CommonFrame1IRQHandler(ENET_Type *base); /*! * @brief the common IRQ handler for the tx/rx irq handler. * * This is used for the combined tx/rx interrupt for multi-ring (frame 2). * * @param base ENET peripheral base address. */ void ENET_CommonFrame2IRQHandler(ENET_Type *base); #else /*! * @brief The transmit IRQ handler. * * @param base ENET peripheral base address. * @param handle The ENET handler pointer. */ void ENET_TransmitIRQHandler(ENET_Type *base, enet_handle_t *handle); /*! * @brief The receive IRQ handler. * * @param base ENET peripheral base address. * @param handle The ENET handler pointer. */ void ENET_ReceiveIRQHandler(ENET_Type *base, enet_handle_t *handle); #endif /* FSL_FEATURE_ENET_QUEUE > 1 */ /*! * @brief Some special IRQ handler including the error, mii, wakeup irq handler. * * @param base ENET peripheral base address. * @param handle The ENET handler pointer. */ void ENET_ErrorIRQHandler(ENET_Type *base, enet_handle_t *handle); /*! * @brief the common IRQ handler for the tx/rx/error etc irq handler. * * This is used for the combined tx/rx/error interrupt for single/mutli-ring (frame 0). * * @param base ENET peripheral base address. */ void ENET_CommonFrame0IRQHandler(ENET_Type *base); /* @} */ #ifdef ENET_ENHANCEDBUFFERDESCRIPTOR_MODE /*! * @name ENET PTP 1588 function operation * @{ */ /*! * @brief Configures the ENET PTP IEEE 1588 feature with the basic configuration. * The function sets the clock for PTP 1588 timer and enables * time stamp interrupts and transmit interrupts for PTP 1588 features. * This API should be called when the 1588 feature is enabled * or the ENET_ENHANCEDBUFFERDESCRIPTOR_MODE is defined. * ENET_Init should be called before calling this API. * * @note The PTP 1588 time-stamp second increase though time-stamp interrupt handler * and the transmit time-stamp store is done through transmit interrupt handler. * As a result, the TS interrupt and TX interrupt are enabled when you call this API. * * @param base ENET peripheral base address. * @param handle ENET handler pointer. * @param ptpConfig The ENET PTP1588 configuration. */ void ENET_Ptp1588Configure(ENET_Type *base, enet_handle_t *handle, enet_ptp_config_t *ptpConfig); /*! * @brief Starts the ENET PTP 1588 Timer. * This function is used to initialize the PTP timer. After the PTP starts, * the PTP timer starts running. * * @param base ENET peripheral base address. * @param ptpClkSrc The clock source of the PTP timer. */ void ENET_Ptp1588StartTimer(ENET_Type *base, uint32_t ptpClkSrc); /*! * @brief Stops the ENET PTP 1588 Timer. * This function is used to stops the ENET PTP timer. * * @param base ENET peripheral base address. */ static inline void ENET_Ptp1588StopTimer(ENET_Type *base) { /* Disable PTP timer and reset the timer. */ base->ATCR &= ~ENET_ATCR_EN_MASK; base->ATCR |= ENET_ATCR_RESTART_MASK; } /*! * @brief Adjusts the ENET PTP 1588 timer. * * @param base ENET peripheral base address. * @param corrIncrease The correction increment value. This value is added every time the correction * timer expires. A value less than the PTP timer frequency(1/ptpClkSrc) slows down the timer, * a value greater than the 1/ptpClkSrc speeds up the timer. * @param corrPeriod The PTP timer correction counter wrap-around value. This defines after how * many timer clock the correction counter should be reset and trigger a correction * increment on the timer. A value of 0 disables the correction counter and no correction occurs. */ void ENET_Ptp1588AdjustTimer(ENET_Type *base, uint32_t corrIncrease, uint32_t corrPeriod); /*! * @brief Sets the ENET PTP 1588 timer channel mode. * * @param base ENET peripheral base address. * @param channel The ENET PTP timer channel number. * @param mode The PTP timer channel mode, see "enet_ptp_timer_channel_mode_t". * @param intEnable Enables or disables the interrupt. */ static inline void ENET_Ptp1588SetChannelMode(ENET_Type *base, enet_ptp_timer_channel_t channel, enet_ptp_timer_channel_mode_t mode, bool intEnable) { uint32_t tcrReg = 0; tcrReg = ENET_TCSR_TMODE(mode) | (intEnable ? ENET_TCSR_TIE_MASK : 0); /* Disable channel mode first. */ base->CHANNEL[channel].TCSR = 0; base->CHANNEL[channel].TCSR = tcrReg; } #if defined(FSL_FEATURE_ENET_HAS_TIMER_PWCONTROL) && FSL_FEATURE_ENET_HAS_TIMER_PWCONTROL /*! * @brief Sets ENET PTP 1588 timer channel mode pulse width. * * For the input "mode" in ENET_Ptp1588SetChannelMode, the kENET_PtpChannelPulseLowonCompare * kENET_PtpChannelPulseHighonCompare only support the pulse width for one 1588 clock. * this function is extended for control the pulse width from 1 to 32 1588 clock cycles. * so call this function if you need to set the timer channel mode for * kENET_PtpChannelPulseLowonCompare or kENET_PtpChannelPulseHighonCompare * with pulse width more than one 1588 clock, * * @param base ENET peripheral base address. * @param channel The ENET PTP timer channel number. * @param isOutputLow True --- timer channel is configured for output compare * pulse output low. * false --- timer channel is configured for output compare * pulse output high. * @param pulseWidth The pulse width control value, range from 0 ~ 31. * 0 --- pulse width is one 1588 clock cycle. * 31 --- pulse width is thirty two 1588 clock cycles. * @param intEnable Enables or disables the interrupt. */ static inline void ENET_Ptp1588SetChannelOutputPulseWidth( ENET_Type *base, enet_ptp_timer_channel_t channel, bool isOutputLow, uint8_t pulseWidth, bool intEnable) { uint32_t tcrReg; tcrReg = ENET_TCSR_TIE(intEnable) | ENET_TCSR_TPWC(pulseWidth); if (isOutputLow) { tcrReg |= ENET_TCSR_TMODE(kENET_PtpChannelPulseLowonCompare); } else { tcrReg |= ENET_TCSR_TMODE(kENET_PtpChannelPulseHighonCompare); } /* Disable channel mode first. */ base->CHANNEL[channel].TCSR = 0; base->CHANNEL[channel].TCSR = tcrReg; } #endif /* FSL_FEATURE_ENET_HAS_TIMER_PWCONTROL */ /*! * @brief Sets the ENET PTP 1588 timer channel comparison value. * * @param base ENET peripheral base address. * @param channel The PTP timer channel, see "enet_ptp_timer_channel_t". * @param cmpValue The compare value for the compare setting. */ static inline void ENET_Ptp1588SetChannelCmpValue(ENET_Type *base, enet_ptp_timer_channel_t channel, uint32_t cmpValue) { base->CHANNEL[channel].TCCR = cmpValue; } /*! * @brief Gets the ENET PTP 1588 timer channel status. * * @param base ENET peripheral base address. * @param channel The IEEE 1588 timer channel number. * @return True or false, Compare or capture operation status */ static inline bool ENET_Ptp1588GetChannelStatus(ENET_Type *base, enet_ptp_timer_channel_t channel) { return (0 != (base->CHANNEL[channel].TCSR & ENET_TCSR_TF_MASK)); } /*! * @brief Clears the ENET PTP 1588 timer channel status. * * @param base ENET peripheral base address. * @param channel The IEEE 1588 timer channel number. */ static inline void ENET_Ptp1588ClearChannelStatus(ENET_Type *base, enet_ptp_timer_channel_t channel) { base->CHANNEL[channel].TCSR |= ENET_TCSR_TF_MASK; base->TGSR = (1U << channel); } /*! * @brief Gets the current ENET time from the PTP 1588 timer. * * @param base ENET peripheral base address. * @param handle The ENET state pointer. This is the same state pointer used in the ENET_Init. * @param ptpTime The PTP timer structure. */ void ENET_Ptp1588GetTimer(ENET_Type *base, enet_handle_t *handle, enet_ptp_time_t *ptpTime); /*! * @brief Sets the ENET PTP 1588 timer to the assigned time. * * @param base ENET peripheral base address. * @param handle The ENET state pointer. This is the same state pointer used in the ENET_Init. * @param ptpTime The timer to be set to the PTP timer. */ void ENET_Ptp1588SetTimer(ENET_Type *base, enet_handle_t *handle, enet_ptp_time_t *ptpTime); /*! * @brief The IEEE 1588 PTP time stamp interrupt handler. * * @param base ENET peripheral base address. * @param handle The ENET state pointer. This is the same state pointer used in the ENET_Init. */ void ENET_Ptp1588TimerIRQHandler(ENET_Type *base, enet_handle_t *handle); /*! * @brief Gets the time stamp of the received frame. * * This function is used for PTP stack to get the timestamp captured by the ENET driver. * * @param handle The ENET handler pointer.This is the same state pointer used in * ENET_Init. * @param ptpTimeData The special PTP timestamp data for search the receive timestamp. * @retval kStatus_Success Get 1588 timestamp success. * @retval kStatus_ENET_PtpTsRingEmpty 1588 timestamp ring empty. * @retval kStatus_ENET_PtpTsRingFull 1588 timestamp ring full. */ status_t ENET_GetRxFrameTime(enet_handle_t *handle, enet_ptp_time_data_t *ptpTimeData); /*! * @brief Gets the time stamp of the transmit frame. * * This function is used for PTP stack to get the timestamp captured by the ENET driver. * * @param handle The ENET handler pointer.This is the same state pointer used in * ENET_Init. * @param ptpTimeData The special PTP timestamp data for search the receive timestamp. * @retval kStatus_Success Get 1588 timestamp success. * @retval kStatus_ENET_PtpTsRingEmpty 1588 timestamp ring empty. * @retval kStatus_ENET_PtpTsRingFull 1588 timestamp ring full. */ status_t ENET_GetTxFrameTime(enet_handle_t *handle, enet_ptp_time_data_t *ptpTimeData); #endif /* ENET_ENHANCEDBUFFERDESCRIPTOR_MODE */ /* @} */ #if defined(__cplusplus) } #endif /*! @}*/ #endif /* _FSL_ENET_H_ */