//***************************************************************************** // // am_hal_stimer.h //! @file //! //! @brief Functions for accessing and configuring the STIMER. //! //! @addtogroup stimer2 Counter/Timer (STIMER) //! @ingroup apollo2hal //! @{ // //***************************************************************************** //***************************************************************************** // // Copyright (c) 2017, Ambiq Micro // All rights reserved. // // Redistribution and use in source and binary forms, with or without // modification, are permitted provided that the following conditions are met: // // 1. Redistributions of source code must retain the above copyright notice, // this list of conditions and the following disclaimer. // // 2. Redistributions in binary form must reproduce the above copyright // notice, this list of conditions and the following disclaimer in the // documentation and/or other materials provided with the distribution. // // 3. Neither the name of the copyright holder nor the names of its // contributors may be used to endorse or promote products derived from this // software without specific prior written permission. // // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" // AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE // IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE // ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE // LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF // SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS // INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN // CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) // ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE // POSSIBILITY OF SUCH DAMAGE. // // This is part of revision 1.2.9 of the AmbiqSuite Development Package. // //***************************************************************************** #ifndef AM_HAL_STIMER_H #define AM_HAL_STIMER_H #ifdef __cplusplus extern "C" { #endif // // Compute address of a given COMPARE or CAPTURE register. // Note - For Apollo2, the parameter n should be 0 (as only 1 stimer module // exists) and the parameter r should be 0-7 (compare) or 0-3 (capture). // #define AM_REG_STIMER_COMPARE(n, r) (AM_REG_CTIMERn(n) + \ AM_REG_CTIMER_SCMPR0_O + (r * 4)) #define AM_REG_STIMER_CAPTURE(n, r) (AM_REG_CTIMERn(n) + \ AM_REG_CTIMER_SCAPT0_O + (r * 4)) //***************************************************************************** // //! @name Interrupt Status Bits //! @brief Interrupt Status Bits for enable/disble use //! //! These macros may be used to set and clear interrupt bits //! @{ // //***************************************************************************** #define AM_HAL_STIMER_INT_COMPAREA AM_REG_CTIMER_STMINTSTAT_COMPAREA_M #define AM_HAL_STIMER_INT_COMPAREB AM_REG_CTIMER_STMINTSTAT_COMPAREB_M #define AM_HAL_STIMER_INT_COMPAREC AM_REG_CTIMER_STMINTSTAT_COMPAREC_M #define AM_HAL_STIMER_INT_COMPARED AM_REG_CTIMER_STMINTSTAT_COMPARED_M #define AM_HAL_STIMER_INT_COMPAREE AM_REG_CTIMER_STMINTSTAT_COMPAREE_M #define AM_HAL_STIMER_INT_COMPAREF AM_REG_CTIMER_STMINTSTAT_COMPAREF_M #define AM_HAL_STIMER_INT_COMPAREG AM_REG_CTIMER_STMINTSTAT_COMPAREG_M #define AM_HAL_STIMER_INT_COMPAREH AM_REG_CTIMER_STMINTSTAT_COMPAREH_M #define AM_HAL_STIMER_INT_OVERFLOW AM_REG_CTIMER_STMINTSTAT_OVERFLOW_M #define AM_HAL_STIMER_INT_CAPTUREA AM_REG_CTIMER_STMINTSTAT_CAPTUREA_M #define AM_HAL_STIMER_INT_CAPTUREB AM_REG_CTIMER_STMINTSTAT_CAPTUREB_M #define AM_HAL_STIMER_INT_CAPTUREC AM_REG_CTIMER_STMINTSTAT_CAPTUREC_M #define AM_HAL_STIMER_INT_CAPTURED AM_REG_CTIMER_STMINTSTAT_CAPTURED_M //! @} //***************************************************************************** // //! @name STimer Configuration Bits //! @brief Interrupt Status Bits for enable/disble use //! //! These macros may be used to set and clear interrupt bits //! @{ // //***************************************************************************** #define AM_HAL_STIMER_CFG_THAW \ AM_REG_CTIMER_STCFG_FREEZE_THAW #define AM_HAL_STIMER_CFG_FREEZE \ AM_REG_CTIMER_STCFG_FREEZE_FREEZE #define AM_HAL_STIMER_CFG_RUN \ AM_REG_CTIMER_STCFG_CLEAR_RUN #define AM_HAL_STIMER_CFG_CLEAR \ AM_REG_CTIMER_STCFG_CLEAR_CLEAR #define AM_HAL_STIMER_CFG_COMPARE_A_ENABLE \ AM_REG_CTIMER_STCFG_COMPARE_A_EN_ENABLE #define AM_HAL_STIMER_CFG_COMPARE_B_ENABLE \ AM_REG_CTIMER_STCFG_COMPARE_B_EN_ENABLE #define AM_HAL_STIMER_CFG_COMPARE_C_ENABLE \ AM_REG_CTIMER_STCFG_COMPARE_C_EN_ENABLE #define AM_HAL_STIMER_CFG_COMPARE_D_ENABLE \ AM_REG_CTIMER_STCFG_COMPARE_D_EN_ENABLE #define AM_HAL_STIMER_CFG_COMPARE_E_ENABLE \ AM_REG_CTIMER_STCFG_COMPARE_E_EN_ENABLE #define AM_HAL_STIMER_CFG_COMPARE_F_ENABLE \ AM_REG_CTIMER_STCFG_COMPARE_F_EN_ENABLE #define AM_HAL_STIMER_CFG_COMPARE_G_ENABLE \ AM_REG_CTIMER_STCFG_COMPARE_G_EN_ENABLE #define AM_HAL_STIMER_CFG_COMPARE_H_ENABLE \ AM_REG_CTIMER_STCFG_COMPARE_H_EN_ENABLE //! @} //***************************************************************************** // //! @name Clock Configuration options //! @brief STimer Configuration register options. //! //! These options are to be used with the am_hal_stimer_config() function. //! @{ // //***************************************************************************** #define AM_HAL_STIMER_NO_CLK \ AM_REG_CTIMER_STCFG_CLKSEL(AM_REG_CTIMER_STCFG_CLKSEL_NOCLK) #define AM_HAL_STIMER_HFRC_3MHZ \ AM_REG_CTIMER_STCFG_CLKSEL(AM_REG_CTIMER_STCFG_CLKSEL_HFRC_DIV16) #define AM_HAL_STIMER_HFRC_187_5KHZ \ AM_REG_CTIMER_STCFG_CLKSEL(AM_REG_CTIMER_STCFG_CLKSEL_HFRC_DIV256) #define AM_HAL_STIMER_XTAL_32KHZ \ AM_REG_CTIMER_STCFG_CLKSEL(AM_REG_CTIMER_STCFG_CLKSEL_XTAL_DIV1) #define AM_HAL_STIMER_XTAL_16KHZ \ AM_REG_CTIMER_STCFG_CLKSEL(AM_REG_CTIMER_STCFG_CLKSEL_XTAL_DIV2) #define AM_HAL_STIMER_XTAL_1KHZ \ AM_REG_CTIMER_STCFG_CLKSEL(AM_REG_CTIMER_STCFG_CLKSEL_XTAL_DIV32) #define AM_HAL_STIMER_LFRC_1KHZ \ AM_REG_CTIMER_STCFG_CLKSEL(AM_REG_CTIMER_STCFG_CLKSEL_LFRC_DIV1) #define AM_HAL_STIMER_HFRC_CTIMER0A \ AM_REG_CTIMER_STCFG_CLKSEL(AM_REG_CTIMER_STCFG_CLKSEL_CTIMER0A) #define AM_HAL_STIMER_HFRC_CTIMER0B \ AM_REG_CTIMER_STCFG_CLKSEL(AM_REG_CTIMER_STCFG_CLKSEL_CTIMER0B) //! @} //***************************************************************************** // //! @name Capture Control Register options. //! @brief Configuration options for capture control register. //! //! These options are to be used with the am_hal_stimer_capture_control_set //! function. //! @{ // //***************************************************************************** #define AM_HAL_STIMER_CAPTURE_A_ENABLE \ AM_REG_CTIMER_CAPTURE_CONTROL_CAPTURE_A_ENABLE #define AM_HAL_STIMER_CAPTURE_B_ENABLE \ AM_REG_CTIMER_CAPTURE_CONTROL_CAPTURE_B_ENABLE #define AM_HAL_STIMER_CAPTURE_C_ENABLE \ AM_REG_CTIMER_CAPTURE_CONTROL_CAPTURE_C_ENABLE #define AM_HAL_STIMER_CAPTURE_D_ENABLE \ AM_REG_CTIMER_CAPTURE_CONTROL_CAPTURE_D_ENABLE //! @} //***************************************************************************** // // // //***************************************************************************** //***************************************************************************** // // Stimer configuration structure // //***************************************************************************** typedef struct { // //! Configuration options for the STIMER // uint32_t ui32STimerConfig; } am_hal_stimer_config_t; //***************************************************************************** // // External function definitions // //***************************************************************************** extern uint32_t am_hal_stimer_config(uint32_t ui32STimerConfig); extern uint32_t am_hal_stimer_counter_get(void); extern void am_hal_stimer_counter_clear(void); extern void am_hal_stimer_compare_delta_set(uint32_t ui32CmprInstance, uint32_t ui32Delta); extern uint32_t am_hal_stimer_compare_get(uint32_t ui32CmprInstance); extern void am_hal_stimer_capture_start(uint32_t ui32CaptureNum, uint32_t ui32GPIONumber, bool bPolarity); extern void am_hal_stimer_capture_stop(uint32_t ui32CaptureNum); extern uint32_t am_hal_stimer_capture_get(uint32_t ui32CaptureNum); extern void am_hal_stimer_int_enable(uint32_t ui32Interrupt); extern uint32_t am_hal_stimer_int_enable_get(void); extern void am_hal_stimer_int_disable(uint32_t ui32Interrupt); extern void am_hal_stimer_int_set(uint32_t ui32Interrupt); extern void am_hal_stimer_int_clear(uint32_t ui32Interrupt); extern uint32_t am_hal_stimer_int_status_get(bool bEnabledOnly); #ifdef __cplusplus } #endif #endif // AM_HAL_STIMER_H //***************************************************************************** // // End Doxygen group. //! @} // //*****************************************************************************