//***************************************************************************** // // am_hal_ios.h //! @file //! //! @brief Functions for interfacing with the IO Slave module //! //! @addtogroup ios2 IO Slave (SPI/I2C) //! @ingroup apollo2hal //! @{ // //***************************************************************************** //***************************************************************************** // // Copyright (c) 2017, Ambiq Micro // All rights reserved. // // Redistribution and use in source and binary forms, with or without // modification, are permitted provided that the following conditions are met: // // 1. Redistributions of source code must retain the above copyright notice, // this list of conditions and the following disclaimer. // // 2. Redistributions in binary form must reproduce the above copyright // notice, this list of conditions and the following disclaimer in the // documentation and/or other materials provided with the distribution. // // 3. Neither the name of the copyright holder nor the names of its // contributors may be used to endorse or promote products derived from this // software without specific prior written permission. // // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" // AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE // IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE // ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE // LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF // SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS // INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN // CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) // ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE // POSSIBILITY OF SUCH DAMAGE. // // This is part of revision 1.2.9 of the AmbiqSuite Development Package. // //***************************************************************************** #ifndef AM_HAL_IOS_H #define AM_HAL_IOS_H #ifdef __cplusplus extern "C" { #endif //***************************************************************************** // //! @name Interface Configuration //! @brief Macro definitions for configuring the physical interface of the IO //! Slave //! //! These macros may be used with the am_hal_ios_config_t structure to set the //! physical parameters of the SPI/I2C slave module. //! //! @{ // //***************************************************************************** #define AM_HAL_IOS_USE_SPI AM_REG_IOSLAVE_CFG_IFCSEL_SPI #define AM_HAL_IOS_SPIMODE_0 AM_REG_IOSLAVE_CFG_SPOL_SPI_MODES_0_3 #define AM_HAL_IOS_SPIMODE_1 AM_REG_IOSLAVE_CFG_SPOL_SPI_MODES_1_2 #define AM_HAL_IOS_SPIMODE_2 AM_REG_IOSLAVE_CFG_SPOL_SPI_MODES_1_2 #define AM_HAL_IOS_SPIMODE_3 AM_REG_IOSLAVE_CFG_SPOL_SPI_MODES_0_3 #define AM_HAL_IOS_USE_I2C AM_REG_IOSLAVE_CFG_IFCSEL_I2C #define AM_HAL_IOS_I2C_ADDRESS(n) AM_REG_IOSLAVE_CFG_I2CADDR(n) #define AM_HAL_IOS_LSB_FIRST AM_REG_IOSLAVE_CFG_LSB(1) //! @} //***************************************************************************** // //! @name Register Access Interrupts //! @brief Macro definitions for register access interrupts. //! //! These macros may be used with any of the //! //! @{ // //***************************************************************************** #define AM_HAL_IOS_ACCESS_INT_00 AM_REG_IOSLAVE_REGACCINTEN_REGACC((uint32_t)1 << 31) #define AM_HAL_IOS_ACCESS_INT_01 AM_REG_IOSLAVE_REGACCINTEN_REGACC((uint32_t)1 << 30) #define AM_HAL_IOS_ACCESS_INT_02 AM_REG_IOSLAVE_REGACCINTEN_REGACC((uint32_t)1 << 29) #define AM_HAL_IOS_ACCESS_INT_03 AM_REG_IOSLAVE_REGACCINTEN_REGACC((uint32_t)1 << 28) #define AM_HAL_IOS_ACCESS_INT_04 AM_REG_IOSLAVE_REGACCINTEN_REGACC((uint32_t)1 << 27) #define AM_HAL_IOS_ACCESS_INT_05 AM_REG_IOSLAVE_REGACCINTEN_REGACC((uint32_t)1 << 26) #define AM_HAL_IOS_ACCESS_INT_06 AM_REG_IOSLAVE_REGACCINTEN_REGACC((uint32_t)1 << 25) #define AM_HAL_IOS_ACCESS_INT_07 AM_REG_IOSLAVE_REGACCINTEN_REGACC((uint32_t)1 << 24) #define AM_HAL_IOS_ACCESS_INT_08 AM_REG_IOSLAVE_REGACCINTEN_REGACC((uint32_t)1 << 23) #define AM_HAL_IOS_ACCESS_INT_09 AM_REG_IOSLAVE_REGACCINTEN_REGACC((uint32_t)1 << 22) #define AM_HAL_IOS_ACCESS_INT_0A AM_REG_IOSLAVE_REGACCINTEN_REGACC((uint32_t)1 << 21) #define AM_HAL_IOS_ACCESS_INT_0B AM_REG_IOSLAVE_REGACCINTEN_REGACC((uint32_t)1 << 20) #define AM_HAL_IOS_ACCESS_INT_0C AM_REG_IOSLAVE_REGACCINTEN_REGACC((uint32_t)1 << 19) #define AM_HAL_IOS_ACCESS_INT_0D AM_REG_IOSLAVE_REGACCINTEN_REGACC((uint32_t)1 << 18) #define AM_HAL_IOS_ACCESS_INT_0E AM_REG_IOSLAVE_REGACCINTEN_REGACC((uint32_t)1 << 17) #define AM_HAL_IOS_ACCESS_INT_0F AM_REG_IOSLAVE_REGACCINTEN_REGACC((uint32_t)1 << 16) #define AM_HAL_IOS_ACCESS_INT_13 AM_REG_IOSLAVE_REGACCINTEN_REGACC((uint32_t)1 << 15) #define AM_HAL_IOS_ACCESS_INT_17 AM_REG_IOSLAVE_REGACCINTEN_REGACC((uint32_t)1 << 14) #define AM_HAL_IOS_ACCESS_INT_1B AM_REG_IOSLAVE_REGACCINTEN_REGACC((uint32_t)1 << 13) #define AM_HAL_IOS_ACCESS_INT_1F AM_REG_IOSLAVE_REGACCINTEN_REGACC((uint32_t)1 << 12) #define AM_HAL_IOS_ACCESS_INT_23 AM_REG_IOSLAVE_REGACCINTEN_REGACC((uint32_t)1 << 11) #define AM_HAL_IOS_ACCESS_INT_27 AM_REG_IOSLAVE_REGACCINTEN_REGACC((uint32_t)1 << 10) #define AM_HAL_IOS_ACCESS_INT_2B AM_REG_IOSLAVE_REGACCINTEN_REGACC((uint32_t)1 << 9) #define AM_HAL_IOS_ACCESS_INT_2F AM_REG_IOSLAVE_REGACCINTEN_REGACC((uint32_t)1 << 8) #define AM_HAL_IOS_ACCESS_INT_33 AM_REG_IOSLAVE_REGACCINTEN_REGACC((uint32_t)1 << 7) #define AM_HAL_IOS_ACCESS_INT_37 AM_REG_IOSLAVE_REGACCINTEN_REGACC((uint32_t)1 << 6) #define AM_HAL_IOS_ACCESS_INT_3B AM_REG_IOSLAVE_REGACCINTEN_REGACC((uint32_t)1 << 5) #define AM_HAL_IOS_ACCESS_INT_3F AM_REG_IOSLAVE_REGACCINTEN_REGACC((uint32_t)1 << 4) #define AM_HAL_IOS_ACCESS_INT_43 AM_REG_IOSLAVE_REGACCINTEN_REGACC((uint32_t)1 << 3) #define AM_HAL_IOS_ACCESS_INT_47 AM_REG_IOSLAVE_REGACCINTEN_REGACC((uint32_t)1 << 2) #define AM_HAL_IOS_ACCESS_INT_4B AM_REG_IOSLAVE_REGACCINTEN_REGACC((uint32_t)1 << 1) #define AM_HAL_IOS_ACCESS_INT_4F AM_REG_IOSLAVE_REGACCINTEN_REGACC((uint32_t)1 << 0) #define AM_HAL_IOS_ACCESS_INT_ALL 0xFFFFFFFF //! @} //***************************************************************************** // //! @name I/O Slave Interrupts //! @brief Macro definitions for I/O slave (IOS) interrupts. //! //! These macros may be used with any of the //! //! @{ // //***************************************************************************** #define AM_HAL_IOS_INT_FSIZE AM_REG_IOSLAVE_INTEN_FSIZE_M #define AM_HAL_IOS_INT_FOVFL AM_REG_IOSLAVE_INTEN_FOVFL_M #define AM_HAL_IOS_INT_FUNDFL AM_REG_IOSLAVE_INTEN_FUNDFL_M #define AM_HAL_IOS_INT_FRDERR AM_REG_IOSLAVE_INTEN_FRDERR_M #define AM_HAL_IOS_INT_GENAD AM_REG_IOSLAVE_INTEN_GENAD_M #define AM_HAL_IOS_INT_IOINTW AM_REG_IOSLAVE_INTEN_IOINTW_M #define AM_HAL_IOS_INT_XCMPWR AM_REG_IOSLAVE_INTEN_XCMPWR_M #define AM_HAL_IOS_INT_XCMPWF AM_REG_IOSLAVE_INTEN_XCMPWF_M #define AM_HAL_IOS_INT_XCMPRR AM_REG_IOSLAVE_INTEN_XCMPRR_M #define AM_HAL_IOS_INT_XCMPRF AM_REG_IOSLAVE_INTEN_XCMPRF_M #define AM_HAL_IOS_INT_ALL 0xFFFFFFFF //! @} //***************************************************************************** // //! @name I/O Slave Interrupts triggers //! @brief Macro definitions for I/O slave (IOS) interrupts. //! //! These macros may be used with am_hal_ios_int_set and am_hal_ios_int_clear //! //! @{ // //***************************************************************************** #define AM_HAL_IOS_IOINTCTL_INT0 (0x01) #define AM_HAL_IOS_IOINTCTL_INT1 (0x02) #define AM_HAL_IOS_IOINTCTL_INT2 (0x04) #define AM_HAL_IOS_IOINTCTL_INT3 (0x08) #define AM_HAL_IOS_IOINTCTL_INT4 (0x10) #define AM_HAL_IOS_IOINTCTL_INT5 (0x20) //! @} //***************************************************************************** // // External variable definitions // //***************************************************************************** //***************************************************************************** // //! @brief LRAM pointer //! //! Pointer to the base of the IO Slave LRAM. // //***************************************************************************** extern volatile uint8_t * const am_hal_ios_pui8LRAM; //***************************************************************************** // //! @brief Configuration structure for the IO slave module. //! //! This structure may be used along with the am_hal_ios_config() function to //! select key parameters of the IO Slave module. See the descriptions of each //! parameter within this structure for more information on what they control. // //***************************************************************************** typedef struct { // //! Interface Selection //! //! This word selects the physical behavior of the IO Slave port. For SPI //! mode, this word should be the logical OR of one or more of the //! following: //! //! AM_HAL_IOS_USE_SPI //! AM_HAL_IOS_SPIMODE_0 //! AM_HAL_IOS_SPIMODE_1 //! AM_HAL_IOS_SPIMODE_2 //! AM_HAL_IOS_SPIMODE_3 //! //! For I2C mode, use the logical OR of one or more of these values instead //! (where n is the 7 or 10-bit I2C address to use): //! //! AM_HAL_IOS_USE_I2C //! AM_HAL_IOS_I2C_ADDRESS(n) //! //! Also, in any mode, you may OR in this value to reverse the order of //! incoming data bits. //! //! AM_HAL_IOS_LSB_FIRST // uint32_t ui32InterfaceSelect; // //! Read-Only section //! //! The IO Slave LRAM is split into three main sections. The first section //! is a "Direct Write" section, which may be accessed for reads or write //! either directly through the Apollo CPU, or over the SPI/I2C bus. The //! "Direct Write" section always begins at LRAM offset 0x0. At the end of //! the normal "Direct Write" space, there is a "Read Only" space, which is //! read/write accessible to the Apollo CPU, but read-only over the I2C/SPI //! Bus. This word selects the base address of this "Read Only" space. //! //! This value may be set to any multiple of 8 between 0x0 and 0x78, //! inclusive. For the configuration to be valid, \e ui32ROBase must also //! be less than or equal to \e ui32FIFOBase //! //! @note The address given here is in units of BYTES. Since the location //! of the "Read Only" space may only be set in 8-byte increments, this //! value must be a multiple of 8. //! //! For the avoidance of doubt this means 0x80 is 128 bytes. These functions //! will shift right by 8 internally. // uint32_t ui32ROBase; // //! FIFO section //! //! After the "Direct Access" and "Read Only" sections is a section of LRAM //! allocated to a FIFO. This section is accessible by the Apollo CPU //! through the FIFO control registers, and accessible on the SPI/I2C bus //! through the 0x7F address. This word selects the base address of the //! FIFO space. The FIFO will extend from the address specified here to the //! address specified in \e ui32RAMBase. //! //! This value may be set to any multiple of 8 between 0x0 and 0x78, //! inclusive. For the configuration to be valid, \e ui32FIFOBase must also //! be greater than or equal to \e ui32ROBase. //! //! @note The address given here is in units of BYTES. Since the location //! of the "FIFO" space may only be set in 8-byte increments, this value //! must be a multiple of 8. //! //! For the avoidance of doubt this means 0x80 is 128 bytes. These functions //! will shift right by 8 internally. // uint32_t ui32FIFOBase; // //! RAM section //! //! At the end of the IOS LRAM, the user may allocate a "RAM" space that //! can only be accessed by the Apollo CPU. This space will not interact //! with the SPI/I2C bus at all, and may be used as general-purpose memory. //! Unlike normal SRAM, this section of LRAM will retain its state through //! Deep Sleep, so it may be used as a data retention space for //! ultra-low-power applications. //! //! This value may be set to any multiple of 8 between 0x0 and 0x100, //! inclusive. For the configuration to be valid, \e ui32RAMBase must also //! be greater than or equal to \e ui32FIFOBase. //! //! @note The address given here is in units of BYTES. Since the location //! of the "FIFO" space may only be set in 8-byte increments, this value //! must be a multiple of 8. //! //! For the avoidance of doubt this means 0x80 is 128 bytes. These functions //! will shift right by 8 internally. // uint32_t ui32RAMBase; // //! FIFO threshold //! //! The IO Slave module will trigger an interrupt when the number of //! entries in the FIFO drops below this number of bytes. // uint32_t ui32FIFOThreshold; // // Pointer to an SRAM // uint8_t *pui8SRAMBuffer; } am_hal_ios_config_t; //***************************************************************************** // // External function definitions // //***************************************************************************** extern void am_hal_ios_enable(uint32_t ui32Module); extern void am_hal_ios_disable(uint32_t ui32Module); // these interrupts drive the HOST side IOS interrupt pins extern void am_hal_ios_host_int_set(uint32_t ui32Interrupt); extern void am_hal_ios_host_int_clear(uint32_t ui32Interrupt); extern uint32_t am_hal_ios_host_int_get(void); extern uint32_t am_hal_ios_host_int_enable_get(void); extern void am_hal_ios_lram_write(uint32_t ui32Offset, uint8_t ui8Value); extern uint8_t am_hal_ios_lram_read(uint32_t ui32Offset); // the following interrupts go back to the NVIC extern void am_hal_ios_config(am_hal_ios_config_t *psConfig); extern void am_hal_ios_access_int_enable(uint32_t ui32Interrupt); extern uint32_t am_hal_ios_access_int_enable_get(void); extern void am_hal_ios_access_int_disable(uint32_t ui32Interrupt); extern void am_hal_ios_access_int_clear(uint32_t ui32Interrupt); extern void am_hal_ios_access_int_set(uint32_t ui32Interrupt); extern uint32_t am_hal_ios_access_int_status_get(bool bEnabledOnly); extern void am_hal_ios_int_enable(uint32_t ui32Interrupt); extern uint32_t am_hal_ios_int_enable_get(void); extern void am_hal_ios_int_disable(uint32_t ui32Interrupt); extern void am_hal_ios_int_clear(uint32_t ui32Interrupt); extern void am_hal_ios_int_set(uint32_t ui32Interrupt); extern uint32_t am_hal_ios_int_status_get(bool bEnabledOnly); extern void am_hal_ios_fifo_buffer_init(uint8_t *pui8Buffer, uint32_t ui32NumBytes); extern uint32_t am_hal_ios_fifo_space_left(void); extern uint32_t am_hal_ios_fifo_space_used(void); extern void am_hal_ios_fifo_service(uint32_t ui32Status); // Returns the number of bytes actually written extern uint32_t am_hal_ios_fifo_write(uint8_t *pui8Data, uint32_t ui32NumBytes); extern void am_hal_ios_fifo_write_simple(uint8_t *pui8Data, uint32_t ui32NumBytes); extern void am_hal_ios_fifo_ptr_set(uint32_t ui32Offset); extern void am_hal_ios_update_fifoctr(void); extern void am_hal_ios_read_poll_complete(void); extern void am_hal_ios_pwrctrl_enable(void); extern void am_hal_ios_pwrctrl_disable(void); #ifdef __cplusplus } #endif #endif // AM_HAL_IOS_H //***************************************************************************** // // End Doxygen group. //! @} // //*****************************************************************************