#ifndef __RASPI4_H__ #define __RASPI4_H__ #include #define __REG32(x) (*((volatile unsigned int *)(x))) //base address #define PER_BASE (0xFE000000) //gpio offset #define GPIO_BASE_OFFSET (0x00200000) //pl011 offset #define PL011_UART_BASE_OFFSET (0x00201000) //pactl cs offset #define PACTL_CS_OFFSET (0x00204E00) //aux offset #define AUX_BASE_OFFSET (0x00215000) //gpio #define GPIO_BASE (PER_BASE + GPIO_BASE_OFFSET) #define GPIO_IRQ_NUM (3) //40 pin mode #define IRQ_GPIO0 (96 + 49) //bank0 (0 to 27) #define IRQ_GPIO1 (96 + 50) //bank1 (28 to 45) #define IRQ_GPIO2 (96 + 51) //bank2 (46 to 57) #define IRQ_GPIO3 (96 + 52) //bank3 //system timer #define ARM_TIMER_IRQ (64) #define ARM_TIMER_BASE (PER_BASE + 0xB000) #define ARM_TIMER_LOAD HWREG32(ARM_TIMER_BASE + 0x400) #define ARM_TIMER_VALUE HWREG32(ARM_TIMER_BASE + 0x404) #define ARM_TIMER_CTRL HWREG32(ARM_TIMER_BASE + 0x408) #define ARM_TIMER_IRQCLR HWREG32(ARM_TIMER_BASE + 0x40C) #define ARM_TIMER_RAWIRQ HWREG32(ARM_TIMER_BASE + 0x410) #define ARM_TIMER_MASKIRQ HWREG32(ARM_TIMER_BASE + 0x414) #define ARM_TIMER_RELOAD HWREG32(ARM_TIMER_BASE + 0x418) #define ARM_TIMER_PREDIV HWREG32(ARM_TIMER_BASE + 0x41C) #define ARM_TIMER_CNTR HWREG32(ARM_TIMER_BASE + 0x420) //uart #define UART_BASE (PER_BASE + PL011_UART_BASE_OFFSET) #define UART0_BASE (UART_BASE + 0x0) #define UART2_BASE (UART_BASE + 0x400) #define UART3_BASE (UART_BASE + 0x600) #define UART4_BASE (UART_BASE + 0x800) #define UART5_BASE (UART_BASE + 0xA00) #define IRQ_AUX_UART (96 + 29) #define UART_REFERENCE_CLOCK (48000000) //aux #define AUX_BASE (PER_BASE + AUX_BASE_OFFSET) #define IRQ_PL011 (96 + 57) //pactl cs #define PACTL_CS_ADDR (PER_BASE + PACTL_CS_OFFSET) #define PACTL_CS HWREG32(PACTL_CS_ADDR) typedef enum { IRQ_SPI0 = 0x00000000, IRQ_SPI1 = 0x00000002, IRQ_SPI2 = 0x00000004, IRQ_SPI3 = 0x00000008, IRQ_SPI4 = 0x00000010, IRQ_SPI5 = 0x00000020, IRQ_SPI6 = 0x00000040, IRQ_I2C0 = 0x00000100, IRQ_I2C1 = 0x00000200, IRQ_I2C2 = 0x00000400, IRQ_I2C3 = 0x00000800, IRQ_I2C4 = 0x00001000, IRQ_I2C5 = 0x00002000, IRQ_I2C6 = 0x00004000, IRQ_I2C7 = 0x00008000, IRQ_UART5 = 0x00010000, IRQ_UART4 = 0x00020000, IRQ_UART3 = 0x00040000, IRQ_UART2 = 0x00080000, IRQ_UART0 = 0x00100000 } PACTL_CS_VAL; // 0x40, 0x44, 0x48, 0x4c: Core 0~3 Timers interrupt control #define CORE0_TIMER_IRQ_CTRL HWREG32(0xFF800040) #define TIMER_IRQ 30 #define NON_SECURE_TIMER_IRQ (1 << 1) //core timer #define ST_BASE_OFFSET (0x003000) #define STIMER_BASE (PER_BASE + ST_BASE_OFFSET) #define STIMER_CS HWREG32(STIMER_BASE + 0x0000) #define STIMER_CLO HWREG32(STIMER_BASE + 0x0004) #define STIMER_CHI HWREG32(STIMER_BASE + 0x0008) #define STIMER_C0 HWREG32(STIMER_BASE + 0x000C) #define STIMER_C1 HWREG32(STIMER_BASE + 0x0010) #define STIMER_C2 HWREG32(STIMER_BASE + 0x0014) #define STIMER_C3 HWREG32(STIMER_BASE + 0x0018) #define DELAY_MICROS(micros) \ do { \ rt_uint32_t compare = STIMER_CLO + micros * 25; \ while (STIMER_CLO < compare); \ } while (0) \ //mmc #define MMC0_BASE_ADDR (PER_BASE + 0x300000) #define MMC2_BASE_ADDR (PER_BASE + 0x340000) //eth #define MAC_REG_BASE_ADDR (void *)(0xfd580000) #define ETH_IRQ (160 + 29) #define SEND_DATA_NO_CACHE (0x08200000) #define RECV_DATA_NO_CACHE (0x08400000) //gic max #define MAX_HANDLERS (256) #define ARM_GIC_NR_IRQS (512) #define INTC_BASE (0xff800000) #define ARM_GIC_MAX_NR (512) #define GIC_V2_BASE (INTC_BASE + 0x00040000) #define GIC_V2_DISTRIBUTOR_BASE (INTC_BASE + 0x00041000) #define GIC_V2_CPU_INTERFACE_BASE (INTC_BASE + 0x00042000) #define GIC_V2_HYPERVISOR_BASE (INTC_BASE + 0x00044000) #define GIC_V2_VIRTUAL_CPU_BASE (INTC_BASE + 0x00046000) #define GIC_IRQ_START 0 #define GIC_ACK_INTID_MASK 0x000003ff #define GIC_PL400_DISTRIBUTOR_PPTR GIC_V2_DISTRIBUTOR_BASE #define GIC_PL400_CONTROLLER_PPTR GIC_V2_CPU_INTERFACE_BASE /* the basic constants and interfaces needed by gic */ rt_inline rt_uint32_t platform_get_gic_dist_base(void) { return GIC_PL400_DISTRIBUTOR_PPTR; } rt_inline rt_uint32_t platform_get_gic_cpu_base(void) { return GIC_PL400_CONTROLLER_PPTR; } #endif