menu "Hardware Drivers Config"

config SOC_CY8C6247BZI_D54
    bool
    select SOC_SERIES_IFX_PSOC61
    select RT_USING_COMPONENTS_INIT
    select RT_USING_USER_MAIN
    default y

menu "Onboard Peripheral Drivers"

    config BSP_USING_USB_TO_USART
        bool "Enable USB TO USART (uart5)"
        select BSP_USING_UART
        select BSP_USING_UART5
        default y
endmenu

menu "On-chip Peripheral Drivers"

    config BSP_USING_GPIO
        bool "Enable GPIO"
        select RT_USING_PIN
        default y

    menuconfig BSP_USING_UART
        bool "Enable UART"
        default y
        select RT_USING_SERIAL
        if BSP_USING_UART
            config BSP_USING_UART0
                bool "Enable UART0"
                default n
            config BSP_USING_UART1
                bool "Enable UART1"
                default n
            config BSP_USING_UART2
                bool "Enable UART2"
                default n
            config BSP_USING_UART3
                bool "Enable UART3"
                default n
            config BSP_USING_UART4
                bool "Enable UART4"
                default n
            config BSP_USING_UART5
                bool "Enable UART5"
                default y
        endif

    menuconfig BSP_USING_PWM
        bool "Enable PWM"
        default n
        select RT_USING_PWM
        if BSP_USING_PWM
        menuconfig BSP_USING_PWM0
            bool "Enable timer0 output pwm"
            default n
            if BSP_USING_PWM0
                menuconfig BSP_USING_PWM0_CH3
                    bool "Enable PWM0 channel3"
                    default n
                    if BSP_USING_PWM0_CH3
                        config BSP_USING_PWM0_PORT13
                        bool "Enable PWM0-PORT13 output pwm"
                        default n
                    endif
                menuconfig BSP_USING_PWM0_CH7
                    bool "Enable PWM0 channel7"
                    default n
                    if BSP_USING_PWM0_CH7
                        config BSP_USING_PWM0_PORT2
                        bool "Enable PWM0-PORT2 output pwm"
                        default n
                    endif
                    if BSP_USING_PWM0_CH7
                        config BSP_USING_PWM0_PORT5
                        bool "Enable PWM0-PORT5 output pwm"
                        default n
                    endif
                    if BSP_USING_PWM0_CH7
                        config BSP_USING_PWM0_PORT7
                        bool "Enable PWM0-PORT7 output pwm"
                        default n
                    endif
                    if BSP_USING_PWM0_CH7
                        config BSP_USING_PWM0_PORT9
                        bool "Enable PWM0-PORT9 output pwm"
                        default n
                    endif
                    if BSP_USING_PWM0_CH7
                        config BSP_USING_PWM0_PORT10
                        bool "Enable PWM0-PORT10 output pwm"
                        default n
                    endif
                    if BSP_USING_PWM0_CH7
                        config BSP_USING_PWM0_PORT12
                        bool "Enable PWM0-PORT12 output pwm"
                        default n
                    endif
            endif
        endif

    menuconfig BSP_USING_SPI
        bool "Enable SPI BUS"
        select RT_USING_SPI
        default n
        if BSP_USING_SPI
            menuconfig BSP_USING_SPI3
                bool "Enable SPI3 BUS"
                default n
                if BSP_USING_SPI3
                    config BSP_USING_SPI3_SAMPLE
                        bool "Enable SPI3 BUS Sample"
                        default n
                endif
            menuconfig BSP_USING_SPI6
                bool "Enable SPI6 BUS"
                default n
                if BSP_USING_SPI6
                    config BSP_USING_SPI6_SAMPLE
                        bool "Enable SPI6 BUS Sample"
                        default n
                endif
        endif

    menuconfig BSP_USING_ADC
        bool "Enable ADC"
        default n
        select RT_USING_ADC
        if BSP_USING_ADC
            config BSP_USING_ADC1
                bool "Enable ADC1"
                default n
        endif

    config BSP_USING_SDMMC
        bool "Enable SDMMC (sd card)"
        default n
        select RT_USING_SDIO
        select RT_USING_DFS
        select RT_USING_DFS_ELMFAT
        if BSP_USING_SDMMC
            config BSP_USING_SDIO1
                bool "Enable SDIO1 (sd card)"
                default n
        endif

    menuconfig BSP_USING_HW_I2C
        bool "Enable Hardware I2C Bus"
        default n
        select RT_USING_I2C
        select RT_USING_PIN
        if BSP_USING_HW_I2C
            config BSP_USING_HW_I2C3
                bool "Enable I2C3 Bus (User I2C)"
                default n
                if BSP_USING_HW_I2C3
                    comment "Notice: P6_0 --> 48; P6_1 --> 49"
                    config BSP_I2C3_SCL_PIN
                        int "i2c3 SCL pin number"
                        range 1 113
                        default 48
                    config BSP_I2C3_SDA_PIN
                        int "i2c3 SDA pin number"
                        range 1 113
                        default 49
                endif
            config BSP_USING_HW_I2C6
                bool "Enable I2C6 Bus (User I2C)"
                default n
                if BSP_USING_HW_I2C6
                    comment "Notice: P13_0 --> 48; P13_1 --> 49"
                    config BSP_I2C6_SCL_PIN
                        int "i2c6 SCL pin number"
                        range 1 113
                        default 104
                    config BSP_I2C6_SDA_PIN
                        int "i2c6 SDA pin number"
                        range 1 113
                        default 105
                endif
        endif

    menuconfig BSP_USING_I2C
        bool "Enable Software I2C Bus"
        default n
        select RT_USING_I2C
        select RT_USING_I2C_BITOPS
        select RT_USING_PIN
        if BSP_USING_I2C
            config BSP_USING_I2C1
                bool "Enable I2C1 Bus (User I2C)"
                default n
                if BSP_USING_I2C1
                    comment "Notice: P13_1 --> 105; P13_2 --> 106"
                    config BSP_I2C1_SCL_PIN
                        int "i2c1 SCL pin number"
                        range 1 113
                        default 105
                    config BSP_I2C1_SDA_PIN
                        int "i2c1 SDA pin number"
                        range 1 113
                        default 106
                endif
        endif

    menuconfig BSP_USING_RTC
        bool "Enable RTC"
        select RT_USING_RTC
        default n
        if BSP_USING_RTC
            choice
                prompt "Select clock source"
                default BSP_RTC_USING_LSE

                config BSP_RTC_USING_LSE
                    bool "RTC USING LSE"

                config BSP_RTC_USING_LSI
                    bool "RTC USING LSI"
            endchoice
        endif

    config BSP_USING_ON_CHIP_FLASH
        bool "Enable on-chip FLASH"
        default n

    config BSP_USING_WDT
        bool "Enable Watchdog Timer"
        select RT_USING_WDT
        default n

    menuconfig BSP_USING_DAC
        bool "Enable DAC"
        default n
        select RT_USING_DAC
        if BSP_USING_DAC
            config BSP_USING_DAC1
                bool "Enable DAC1"
                default n
            config BSP_USING_DAC2
                bool "Enable DAC2"
                default n
        endif

    menuconfig BSP_USING_TIM
        bool "Enable timer"
        default n
        select RT_USING_HWTIMER
        if BSP_USING_TIM
            config BSP_USING_TIM1
                bool "Enable TIM1"
                default n
            config BSP_USING_TIM2
                bool "Enable TIM2"
                default n
        endif
endmenu

endmenu