/*!
*****************************************************************************
** \file        ./adi/inc/adi_sys_error.h
**
** \version     $Id: adi_sys_error.h 2 2014-08-07 07:42:50Z huangjunlei $
**
** \brief       ADI error codes & modules definition.
**
** \attention   THIS SAMPLE CODE IS PROVIDED AS IS. GOKE MICROELECTRONICS
**              ACCEPTS NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR
**              OMMISSIONS
**
** (C) Copyright 2012-2013 by GOKE MICROELECTRONICS CO.,LTD
**
*****************************************************************************
*/

#ifndef _ADI_SYS_ERROR_H_
    #define _ADI_SYS_ERROR_H_

/*
********************************************************************************
** Common error codes (reserved from 0 to -99)
**
** Each error code shall be decreased in steps of 1.
********************************************************************************
*/
    //! Indication of success.
    #define GADI_OK                                        0

    //! Bad parameter passed.
    #define GADI_ERR_BAD_PARAMETER                        -1

    //! Memory allocation failed.
    #define GADI_ERR_OUT_OF_MEMORY                        -2

    //! Device already initialised.
    #define GADI_ERR_ALREADY_INITIALIZED                  -3

    //! Device not initialised.
    #define GADI_ERR_NOT_INITIALIZED                      -4

    //! Feature or function is not available.
    #define GADI_ERR_FEATURE_NOT_SUPPORTED                -5

    //! Timeout occured.
    #define GADI_ERR_TIMEOUT                              -6

    //! The device is busy, try again later.
    #define GADI_ERR_DEVICE_BUSY                          -7

    //! Invalid handle was passed.
    #define GADI_ERR_INVALID_HANDLE                       -8

    //! Semaphore could not be created.
    #define GADI_ERR_SEMAPHORE_CREATE                     -9

    //! The driver's used version is not supported.
    #define GADI_ERR_UNSUPPORTED_VERSION                 -10

    //! Mailqueue coult not be created.
    #define GADI_ERR_MAILQUEUE_CREATE                    -11

    //! Device/handle is not open.
    #define GADI_ERR_NOT_OPEN                            -12

    //! Device/handle is already open.
    #define GADI_ERR_ALREADY_OPEN                        -13

    //! Thread could not be created.
    #define GADI_ERR_THREAD_CREATE                       -14

    //! Thread could not be created.
    #define GADI_ERR_FROM_DRIVER                         -15

    //! Thread could not be created.
    #define GADI_ERR_ALREAD_RUNNING                      -16

    //! Out of the max size.
    #define GADI_ERR_OUT_OF_SIZE                         -17

    //! File is written failed.
    #define GADI_ERR_WRITE_FAILED                        -18

    //! File is read failed.
    #define GADI_ERR_READ_FAILED                         -19
    
    //! Device/handle is not MAP.
    #define GADI_ERR_MAP                                 -20

    //! operation is not permitted
    #define GADI_ERR_OPERATION_NOT_PERMIT                -21

/*
********************************************************************************
**
** GADI module specific bases (range from -1,000 to -999,000)
**
** Each module base shall be decreased in steps of 1,000.
**
** The module specific error codes shall range from -100 to -999.
********************************************************************************
*/
    //! SYS module base
    #define GADI_SYS_MODULE_BASE                     -1000
        
    //! audio input module base
    #define GADI_AUDIO_MODULE_BASE                   -2000
        
    //! i2s module base
    #define GADI_I2S_MODULE_BASE                     -3000
    
    //! capture module base
    #define GADI_CAP_MODULE_BASE                     -4000
        
    //! face detection module base
    #define GADI_FD_MODULE_BASE                      -5000
        
    //! gpio module base
    #define GADI_GPIO_MODULE_BASE                    -6000
        
    //! i2c module base
    #define GADI_I2C_MODULE_BASE                     -7000
        
    //! isp module base
    #define GADI_ISP_MODULE_BASE                     -8000
        
    //! motion detection module base
    #define GADI_MD_MODULE_BASE                      -9000
        
    //! OSD module base
    #define GADI_OSD_MODULE_BASE                     -10000
        
    //! privacy mask module base
    #define GADI_PM_MODULE_BASE                      -11000
        
    //! PTZ module base
    #define GADI_PTZ_MODULE_BASE                     -12000
        
    //! PWM module base
    #define GADI_PWM_MODULE_BASE                     -13000
        
    //! SPI module base
    #define GADI_SPI_MODULE_BASE                     -14000
        
    //! video decode module base
    #define GADI_VDEC_MODULE_BASE                    -15000
        
    //! video encode module base
    #define GADI_VENC_MODULE_BASE                    -16000
        
    //! video input module base
    #define GADI_VI_MODULE_BASE                      -17000
        
    //! video output module base
    #define GADI_VO_MODULE_BASE                      -18000
        
    //! dsp output module base
    #define GADI_DSP_MODULE_BASE                     -19000
        
    //! ir output module base
    #define GADI_IR_MODULE_BASE                      -20000

    //! crypto output module base
    #define GADI_CRYPTO_MODULE_BASE                  -21000

    //! wdog output module base
    #define GADI_WDOG_MODULE_BASE                    -22000

// TODO: GDerro 2 GADI Error....

#endif /* _ADI_SYS_ERROR_H_ */