/**************************************************************************//** * @file eadc.h * @version V1.00 * $Revision: 17 $ * $Date: 15/12/01 10:13a $ * @brief NUC472/NUC442 EADC driver header file * * @note * Copyright (C) 2015 Nuvoton Technology Corp. All rights reserved. *****************************************************************************/ #ifndef __EADC_H__ #define __EADC_H__ #ifdef __cplusplus extern "C" { #endif /** @addtogroup NUC472_442_Device_Driver NUC472/NUC442 Device Driver @{ */ /** @addtogroup NUC472_442_EADC_Driver EADC Driver @{ */ /** @addtogroup NUC472_442_EADC_EXPORTED_CONSTANTS EADC Exported Constants @{ */ /*---------------------------------------------------------------------------------------------------------*/ /* EADC SAMPLE module number Definitions */ /*---------------------------------------------------------------------------------------------------------*/ #define EADC0_SAMPLE_MODULE0 0 /*!< EADC0 SAMPLE module 0 \hideinitializer */ #define EADC0_SAMPLE_MODULE1 1 /*!< EADC0 SAMPLE module 1 \hideinitializer */ #define EADC0_SAMPLE_MODULE2 2 /*!< EADC0 SAMPLE module 2 \hideinitializer */ #define EADC0_SAMPLE_MODULE3 3 /*!< EADC0 SAMPLE module 3 \hideinitializer */ #define EADC0_SAMPLE_MODULE4 4 /*!< EADC0 SAMPLE module 4 \hideinitializer */ #define EADC0_SAMPLE_MODULE5 5 /*!< EADC0 SAMPLE module 5 \hideinitializer */ #define EADC0_SAMPLE_MODULE6 6 /*!< EADC0 SAMPLE module 6 \hideinitializer */ #define EADC0_SAMPLE_MODULE7 7 /*!< EADC0 SAMPLE module 7 \hideinitializer */ #define EADC1_SAMPLE_MODULE0 8 /*!< EADC1 SAMPLE module 0 \hideinitializer */ #define EADC1_SAMPLE_MODULE1 9 /*!< EADC1 SAMPLE module 1 \hideinitializer */ #define EADC1_SAMPLE_MODULE2 10 /*!< EADC1 SAMPLE module 2 \hideinitializer */ #define EADC1_SAMPLE_MODULE3 11 /*!< EADC1 SAMPLE module 3 \hideinitializer */ #define EADC1_SAMPLE_MODULE4 12 /*!< EADC1 SAMPLE module 4 \hideinitializer */ #define EADC1_SAMPLE_MODULE5 13 /*!< EADC1 SAMPLE module 5 \hideinitializer */ #define EADC1_SAMPLE_MODULE6 14 /*!< EADC1 SAMPLE module 6 \hideinitializer */ #define EADC1_SAMPLE_MODULE7 15 /*!< EADC1 SAMPLE module 7 \hideinitializer */ /*---------------------------------------------------------------------------------------------------------*/ /* EADC Compare SAMPLE module number Definitions */ /*---------------------------------------------------------------------------------------------------------*/ #define CMP_EADC0_SAMPLE_MODULE0 0 /*!< Compare EADC0 SAMPLE module 0 \hideinitializer */ #define CMP_EADC0_SAMPLE_MODULE1 1 /*!< Compare EADC0 SAMPLE module 1 \hideinitializer */ #define CMP_EADC0_SAMPLE_MODULE2 2 /*!< Compare EADC0 SAMPLE module 2 \hideinitializer */ #define CMP_EADC0_SAMPLE_MODULE3 3 /*!< Compare EADC0 SAMPLE module 3 \hideinitializer */ #define CMP_EADC1_SAMPLE_MODULE0 4 /*!< Compare EADC1 SAMPLE module 0 \hideinitializer */ #define CMP_EADC1_SAMPLE_MODULE1 5 /*!< Compare EADC1 SAMPLE module 1 \hideinitializer */ #define CMP_EADC1_SAMPLE_MODULE2 6 /*!< Compare EADC1 SAMPLE module 2 \hideinitializer */ #define CMP_EADC1_SAMPLE_MODULE3 7 /*!< Compare EADC1 SAMPLE module 3 \hideinitializer */ /*---------------------------------------------------------------------------------------------------------*/ /* EADC_ADnSPCTLx Constant Definitions */ /*---------------------------------------------------------------------------------------------------------*/ #define EADC_SCTL_CHSEL(x) ((x) << EADC_AD0SPCTL0_CHSEL_Pos) /*!< A/D sample module channel selection \hideinitializer */ #define EADC_SCTL_TRGDLYDIV(x) ((x) << EADC_AD0SPCTL0_TRGDLYDIV_Pos) /*!< A/D sample module start of conversion trigger delay clock divider selection \hideinitializer */ #define EADC_SCTL_TRGDLYCNT(x) ((x) << EADC_AD0SPCTL0_TRGDLYCNT_Pos) /*!< A/D sample module start of conversion trigger delay time \hideinitializer */ #define EADC_SOFTWARE_TRIGGER (0UL << EADC_AD0SPCTL0_TRGSEL_Pos) /*!< Software trigger \hideinitializer */ #define EADC_STADC_TRIGGER (1UL << EADC_AD0SPCTL0_TRGSEL_Pos) /*!< External pin STADC trigger \hideinitializer */ #define EADC_ADINT0_TRIGGER (2UL << EADC_AD0SPCTL0_TRGSEL_Pos) /*!< EADC ADINT0 interrupt EOC pulse trigger \hideinitializer */ #define EADC_ADINT1_TRIGGER (3UL << EADC_AD0SPCTL0_TRGSEL_Pos) /*!< EADC ADINT1 interrupt EOC pulse trigger \hideinitializer */ #define EADC_TIMER0_TRIGGER (4UL << EADC_AD0SPCTL0_TRGSEL_Pos) /*!< Timer0 overflow pulse trigger \hideinitializer */ #define EADC_TIMER1_TRIGGER (5UL << EADC_AD0SPCTL0_TRGSEL_Pos) /*!< Timer1 overflow pulse trigger \hideinitializer */ #define EADC_TIMER2_TRIGGER (6UL << EADC_AD0SPCTL0_TRGSEL_Pos) /*!< Timer2 overflow pulse trigger \hideinitializer */ #define EADC_TIMER3_TRIGGER (7UL << EADC_AD0SPCTL0_TRGSEL_Pos) /*!< Timer3 overflow pulse trigger \hideinitializer */ #define EADC_EPWM0CH0_TRIGGER (8UL << EADC_AD0SPCTL0_TRGSEL_Pos) /*!< EPWM0CH0 trigger \hideinitializer */ #define EADC_EPWM0CH2_TRIGGER (9UL << EADC_AD0SPCTL0_TRGSEL_Pos) /*!< EPWM0CH2 trigger \hideinitializer */ #define EADC_EPWM0CH4_TRIGGER (0xAUL << EADC_AD0SPCTL0_TRGSEL_Pos) /*!< EPWM0CH4 trigger \hideinitializer */ #define EADC_EPWM1CH0_TRIGGER (0xBUL << EADC_AD0SPCTL0_TRGSEL_Pos) /*!< EPWM1CH0 trigger \hideinitializer */ #define EADC_EPWM1CH2_TRIGGER (0xCUL << EADC_AD0SPCTL0_TRGSEL_Pos) /*!< EPWM1CH2 trigger \hideinitializer */ #define EADC_EPWM1CH4_TRIGGER (0xDUL << EADC_AD0SPCTL0_TRGSEL_Pos) /*!< EPWM1CH4 trigger \hideinitializer */ #define EADC_PWM0CH0_TRIGGER (0xEUL << EADC_AD0SPCTL0_TRGSEL_Pos) /*!< PWM0CH0 trigger \hideinitializer */ #define EADC_PWM0CH1_TRIGGER (0xFUL << EADC_AD0SPCTL0_TRGSEL_Pos) /*!< PWM0CH1 trigger \hideinitializer */ #define EADC_SPCTL_TRGDLYDIV_DIVIDER_1 (0 << EADC_AD0SPCTL0_TRGDLYDIV_Pos) /*!< Trigger delay clock frequency is ADC_CLK/1 \hideinitializer */ #define EADC_SPCTL_TRGDLYDIV_DIVIDER_2 (0x1UL << EADC_AD0SPCTL0_TRGDLYDIV_Pos) /*!< Trigger delay clock frequency is ADC_CLK/2 \hideinitializer */ #define EADC_SPCTL_TRGDLYDIV_DIVIDER_4 (0x2UL << EADC_AD0SPCTL0_TRGDLYDIV_Pos) /*!< Trigger delay clock frequency is ADC_CLK/4 \hideinitializer */ #define EADC_SPCTL_TRGDLYDIV_DIVIDER_16 (0x3UL << EADC_AD0SPCTL0_TRGDLYDIV_Pos) /*!< Trigger delay clock frequency is ADC_CLK/16 \hideinitializer */ /*---------------------------------------------------------------------------------------------------------*/ /* EADC_CMP Constant Definitions */ /*---------------------------------------------------------------------------------------------------------*/ #define EADC_CMP_CMPCOND_LESS_THAN (0UL << EADC_CMP0_CMPCOND_Pos) /*!< The compare condition is "less than" \hideinitializer */ #define EADC_CMP_CMPCOND_GREATER_OR_EQUAL (1UL << EADC_CMP0_CMPCOND_Pos) /*!< The compare condition is "greater than or equal to" \hideinitializer */ #define EADC_CMP_ADCMPIE_ENABLE (EADC_CMP0_ADCMPIE_Msk) /*!< A/D result compare interrupt enable \hideinitializer */ #define EADC_CMP_ADCMPIE_DISABLE (~EADC_CMP0_ADCMPIE_Msk) /*!< A/D result compare interrupt disable \hideinitializer */ /*---------------------------------------------------------------------------------------------------------*/ /* EADC PWM Trigger Condition Definitions */ /*---------------------------------------------------------------------------------------------------------*/ #define EADC0_TRIGGEREN0 0 /*!< A/D trigger condition for SAMPLE00 \hideinitializer */ #define EADC0_TRIGGEREN1 1 /*!< A/D trigger condition for SAMPLE01 \hideinitializer */ #define EADC0_TRIGGEREN2 2 /*!< A/D trigger condition for SAMPLE02 \hideinitializer */ #define EADC0_TRIGGEREN3 3 /*!< A/D trigger condition for SAMPLE03 \hideinitializer */ #define EADC1_TRIGGEREN0 4 /*!< A/D trigger condition for SAMPLE10 \hideinitializer */ #define EADC1_TRIGGEREN1 5 /*!< A/D trigger condition for SAMPLE11 \hideinitializer */ #define EADC1_TRIGGEREN2 6 /*!< A/D trigger condition for SAMPLE12 \hideinitializer */ #define EADC1_TRIGGEREN3 7 /*!< A/D trigger condition for SAMPLE13 \hideinitializer */ /*---------------------------------------------------------------------------------------------------------*/ /* EADC Channel selection Definitions */ /*---------------------------------------------------------------------------------------------------------*/ #define EADC0_CH0 0 /*!< Select EADC0 channel 0 for EADC0 SAMPLE Module \hideinitializer */ #define EADC0_CH1 1 /*!< Select EADC0 channel 1 for EADC0 SAMPLE Module \hideinitializer */ #define EADC0_CH2 2 /*!< Select EADC0 channel 2 for EADC0 SAMPLE Module \hideinitializer */ #define EADC0_CH3 3 /*!< Select EADC0 channel 3 for EADC0 SAMPLE Module \hideinitializer */ #define EADC0_CH4 4 /*!< Select EADC0 channel 4 for EADC0 SAMPLE Module \hideinitializer */ #define EADC0_CH5 5 /*!< Select EADC0 channel 5 for EADC0 SAMPLE Module \hideinitializer */ #define EADC0_CH6 6 /*!< Select EADC0 channel 6 for EADC0 SAMPLE Module \hideinitializer */ #define EADC0_CH7 7 /*!< Select EADC0 channel 7 for EADC0 SAMPLE Module \hideinitializer */ #define EADC0_VBG 8 /*!< Select EADC0 VBG for EADC0 SAMPLE Module \hideinitializer */ #define EADC0_VTEMP 9 /*!< Select EADC0 VTEMP for EADC0 SAMPLE Module \hideinitializer */ #define EADC0_AVSS 10 /*!< Select EADC0 AVSS for EADC0 SAMPLE Module \hideinitializer */ #define EADC0_OP0 11 /*!< Select EADC0 OP0 for EADC0 SAMPLE Module \hideinitializer */ #define EADC1_CH0 0 /*!< Select EADC1 channel 0 for EADC1 SAMPLE Module \hideinitializer */ #define EADC1_CH1 1 /*!< Select EADC1 channel 1 for EADC1 SAMPLE Module \hideinitializer */ #define EADC1_CH2 2 /*!< Select EADC1 channel 2 for EADC1 SAMPLE Module \hideinitializer */ #define EADC1_CH3 3 /*!< Select EADC1 channel 3 for EADC1 SAMPLE Module \hideinitializer */ #define EADC1_CH4 4 /*!< Select EADC1 channel 4 for EADC1 SAMPLE Module \hideinitializer */ #define EADC1_CH5 5 /*!< Select EADC1 channel 5 for EADC1 SAMPLE Module \hideinitializer */ #define EADC1_CH6 6 /*!< Select EADC1 channel 6 for EADC1 SAMPLE Module \hideinitializer */ #define EADC1_CH7 7 /*!< Select EADC1 channel 7 for EADC1 SAMPLE Module \hideinitializer */ #define EADC1_OP1 8 /*!< Select EADC1 OP1 for EADC1 SAMPLE Module \hideinitializer */ /*@}*/ /* end of group NUC472_442_EADC_EXPORTED_CONSTANTS */ /** @addtogroup NUC472_442_EADC_EXPORTED_FUNCTIONS EADC Exported Functions @{ */ /*---------------------------------------------------------------------------------------------------------*/ /* EADC Macro Definitions */ /*---------------------------------------------------------------------------------------------------------*/ /** * @brief Power down EADC module * @param[in] eadc Base address of EADC module * @return None * \hideinitializer */ #define EADC_POWER_DOWN(eadc) (EADC->CTL &= ~EADC_CTL_ADCEN_Msk) /** * @brief Power on EADC module * @param[in] eadc Base address of EADC module * @return None * \hideinitializer */ #define EADC_POWER_ON(eadc) (EADC->CTL |= EADC_CTL_ADCEN_Msk) /** * @brief A/D Converter Control Circuits Reset. * @param[in] eadc Base address of EADC module. * @return None * @details ADCRST bit (EADC_CT[1]) remains 1 during EADC reset, when EADC reset end, the ADCRST bit is automatically cleared to 0. * \hideinitializer */ #define EADC_CONV_RESET(eadc) ((eadc)->CTL |= EADC_CTL_ADCRST_Msk) /** * @brief Enable double buffer mode. * @param[in] eadc Base address of EADC module. * @param[in] u32ModuleNum Decides the sample module number, valid values are: * - \ref EADC0_SAMPLE_MODULE0 : EADC0 SAMPLE module 0 * - \ref EADC0_SAMPLE_MODULE1 : EADC0 SAMPLE module 1 * - \ref EADC0_SAMPLE_MODULE2 : EADC0 SAMPLE module 2 * - \ref EADC0_SAMPLE_MODULE3 : EADC0 SAMPLE module 3 * - \ref EADC1_SAMPLE_MODULE0 : EADC1 SAMPLE module 0 * - \ref EADC1_SAMPLE_MODULE1 : EADC1 SAMPLE module 1 * - \ref EADC1_SAMPLE_MODULE2 : EADC1 SAMPLE module 2 * - \ref EADC1_SAMPLE_MODULE3 : EADC1 SAMPLE module 3 * @return None * @details The EADC controller supports a double buffer mode in eadc0/1 sample module 0~3. * \hideinitializer */ #define EADC_ENABLE_DOUBLE_BUFFER(eadc, u32ModuleNum) ((eadc)->DBMEN |= (1 << u32ModuleNum)) /** * @brief Disable double buffer mode. * @param[in] eadc Base address of EADC module.. * @param[in] u32ModuleNum Decides the sample module number, valid values are: * - \ref EADC0_SAMPLE_MODULE0 : EADC0 SAMPLE module 0 * - \ref EADC0_SAMPLE_MODULE1 : EADC0 SAMPLE module 1 * - \ref EADC0_SAMPLE_MODULE2 : EADC0 SAMPLE module 2 * - \ref EADC0_SAMPLE_MODULE3 : EADC0 SAMPLE module 3 * - \ref EADC1_SAMPLE_MODULE0 : EADC1 SAMPLE module 0 * - \ref EADC1_SAMPLE_MODULE1 : EADC1 SAMPLE module 1 * - \ref EADC1_SAMPLE_MODULE2 : EADC1 SAMPLE module 2 * - \ref EADC1_SAMPLE_MODULE3 : EADC1 SAMPLE module 3 * @return None * @details Sample has one sample result register. * \hideinitializer */ #define EADC_DISABLE_DOUBLE_BUFFER(eadc, u32ModuleNum) ((eadc)->DBMEN &= ~(1 << u32ModuleNum)) /** * @brief Enable the interrupt. * @param[in] eadc Base address of EADC module. * @param[in] u32Mask Decides the combination of interrupt enable bits. Each bit corresponds to a interrupt enable. * This parameter decides which interrupts will be enabled. Bit 0 is ADCIEN0, bit 1 is ADCIEN1..., bit 3 is ADCIEN3. * @return None * @details The A/D converter generates a conversion end ADIFn (EADC_STATUS1[n]) upon the end of specific sample module A/D conversion. * If ADCIENn bit (EADC_CTL[n+2]) is set then conversion end interrupt request ADINTn is generated (n=0~3). * \hideinitializer */ #define EADC_ENABLE_INT(eadc, u32Mask) ((eadc)->CTL |= ((u32Mask) << EADC_CTL_ADCIEN0_Pos)) /** * @brief Disable the interrupt. * @param[in] eadc Base address of EADC module. * @param[in] u32Mask Decides the combination of interrupt enable bits. Each bit corresponds to a interrupt enable. * This parameter decides which interrupts will be disabled. Bit 0 is ADCIEN0, bit 1 is ADCIEN1..., bit 3 is ADCIEN3. * @return None * @details Specific sample module A/D ADINT0 interrupt function Disabled. * \hideinitializer */ #define EADC_DISABLE_INT(eadc, u32Mask) ((eadc)->CTL &= ~((u32Mask) << EADC_CTL_ADCIEN0_Pos)) /** * @brief Enable the sample module interrupt. * @param[in] eadc Base address of EADC module. * @param[in] u32IntSel Decides which interrupt source will be used, valid value are from 0 to 3. * @param[in] u32ModuleMask the combination of sample module interrupt enable bits. Each bit corresponds to a sample module interrupt enable. * This parameter decides which sample module interrupts will be enabled, valid range are between 1~0xFFFF. * @return None * @details There are 4 EADC interrupts ADINT0~3, and each of these interrupts has its own interrupt vector address. * \hideinitializer */ #define EADC_ENABLE_SAMPLE_MODULE_INT(eadc, u32IntSel, u32ModuleMask) ((eadc)->INTSRC[(u32IntSel)] |= (u32ModuleMask)) /** * @brief Disable the sample module interrupt. * @param[in] eadc Base address of EADC module. * @param[in] u32IntSel Decides which interrupt source will be used, valid value are from 0 to 3. * @param[in] u32ModuleMask the combination of sample module interrupt enable bits. Each bit corresponds to a sample module interrupt enable. * This parameter decides which sample module interrupts will be disabled, valid range are between 1~0xFFFF. * @return None * @details There are 4 EADC interrupts ADINT0~3, and each of these interrupts has its own interrupt vector address. * \hideinitializer */ #define EADC_DISABLE_SAMPLE_MODULE_INT(eadc, u32IntSel, u32ModuleMask) ((eadc)->INTSRC[(u32IntSel)] &= ~(u32ModuleMask)) /** * @brief Start the A/D conversion. * @param[in] eadc Base address of EADC module. * @param[in] u32ModuleMask The combination of sample module. Each bit corresponds to a sample module. * This parameter decides which sample module will be conversion, valid range are between 1~0xFFFF. * Bit 0 is sample module 0, bit 1 is sample module 1..., bit 15 is sample module 15. * @return None * @details After write EADC_SWTRG register to start EADC conversion, the EADC_PENDSTS register will show which SAMPLE will conversion. * \hideinitializer */ #define EADC_START_CONV(eadc, u32ModuleMask) ((eadc)->SWTRG = (u32ModuleMask)) /** * @brief Get the conversion pending flag. * @param[in] eadc Base address of EADC module. * @return Return the conversion pending sample module. * @return None * @details This STPFn(EADC_PENDSTS[15:0]) bit remains 1 during pending state, when the respective EADC conversion is end, * the STPFn (n=0~15) bit is automatically cleared to 0. * \hideinitializer */ #define EADC_GET_PENDING_CONV(eadc) ((eadc)->PENDSTS) /** * @brief Get the conversion data of the user-specified sample module. * @param[in] eadc Base address of EADC module. * @param[in] u32ModuleNum Decides the sample module number, valid values are: * - \ref EADC0_SAMPLE_MODULE0 : EADC0 SAMPLE module 0 * - \ref EADC0_SAMPLE_MODULE1 : EADC0 SAMPLE module 1 * - \ref EADC0_SAMPLE_MODULE2 : EADC0 SAMPLE module 2 * - \ref EADC0_SAMPLE_MODULE3 : EADC0 SAMPLE module 3 * - \ref EADC0_SAMPLE_MODULE4 : EADC0 SAMPLE module 4 * - \ref EADC0_SAMPLE_MODULE5 : EADC0 SAMPLE module 5 * - \ref EADC0_SAMPLE_MODULE6 : EADC0 SAMPLE module 6 * - \ref EADC0_SAMPLE_MODULE7 : EADC0 SAMPLE module 7 * - \ref EADC1_SAMPLE_MODULE0 : EADC1 SAMPLE module 0 * - \ref EADC1_SAMPLE_MODULE1 : EADC1 SAMPLE module 1 * - \ref EADC1_SAMPLE_MODULE2 : EADC1 SAMPLE module 2 * - \ref EADC1_SAMPLE_MODULE3 : EADC1 SAMPLE module 3 * - \ref EADC1_SAMPLE_MODULE4 : EADC1 SAMPLE module 4 * - \ref EADC1_SAMPLE_MODULE5 : EADC1 SAMPLE module 5 * - \ref EADC1_SAMPLE_MODULE6 : EADC1 SAMPLE module 6 * - \ref EADC1_SAMPLE_MODULE7 : EADC1 SAMPLE module 7 * @return Return the conversion data of the user-specified sample module. * @details This macro is used to read RESULT bit (EADC_ADxDATn[11:0], x=0~1, n=0~7) field to get conversion data. * \hideinitializer */ #define EADC_GET_CONV_DATA(eadc, u32ModuleNum) (*(__IO uint32_t *)(&((eadc)->AD0DAT0) + (u32ModuleNum)) & EADC_AD0DAT0_RESULT_Msk) /** * @brief Get the data overrun flag of the user-specified sample module. * @param[in] eadc Base address of EADC module. * @param[in] u32ModuleMask The combination of data overrun status bits. Each bit corresponds to a data overrun status, valid range are between 1~0x7FFFF. * @return Return the data overrun flag of the user-specified sample module. * @details This macro is used to read OV bit (EADC_STATUS0[31:16]) field to get data overrun status. * \hideinitializer */ #define EADC_GET_DATA_OVERRUN_FLAG(eadc, u32ModuleMask) (((eadc)->STATUS0 >> EADC_STATUS0_OV_Pos) & (u32ModuleMask)) /** * @brief Get the data valid flag of the user-specified sample module. * @param[in] eadc Base address of EADC module. * @param[in] u32ModuleMask The combination of data valid status bits. Each bit corresponds to a data valid status, valid range are between 1~0x7FFFF. * @return Return the data valid flag of the user-specified sample module. * @details This macro is used to read VALID bit of EADC_STATUS0[15:0] to get data valid status. * \hideinitializer */ #define EADC_GET_DATA_VALID_FLAG(eadc, u32ModuleMask) (((eadc)->STATUS0 & EADC_STATUS0_VALID_Msk) & (u32ModuleMask)) /** * @brief Get the double data of the user-specified sample module. * @param[in] eadc Base address of EADC module. * @param[in] u32ModuleNum Decides the sample module number, valid values are: * - \ref EADC0_SAMPLE_MODULE0 : EADC0 SAMPLE module 0 * - \ref EADC0_SAMPLE_MODULE1 : EADC0 SAMPLE module 1 * - \ref EADC0_SAMPLE_MODULE2 : EADC0 SAMPLE module 2 * - \ref EADC0_SAMPLE_MODULE3 : EADC0 SAMPLE module 3 * - \ref EADC1_SAMPLE_MODULE0 : EADC1 SAMPLE module 0 * - \ref EADC1_SAMPLE_MODULE1 : EADC1 SAMPLE module 1 * - \ref EADC1_SAMPLE_MODULE2 : EADC1 SAMPLE module 2 * - \ref EADC1_SAMPLE_MODULE3 : EADC1 SAMPLE module 3 * @return Return the double data of the user-specified sample module. * @details This macro is used to read RESULT bit (EADC_ADxDDATn[11:0], x=0~1, n=0~3) field to get conversion data. * \hideinitializer */ #define EADC_GET_DOUBLE_DATA(eadc, u32ModuleNum) (*(__IO uint32_t *)(&((eadc)->AD0DDAT0) + (u32ModuleNum)) & EADC_AD0DDAT0_RESULT_Msk) /** * @brief Get the user-specified interrupt flags. * @param[in] eadc Base address of EADC module. * @param[in] u32Mask The combination of interrupt status bits. Each bit corresponds to a interrupt status. * Bit 0 is ADIF0, bit 1 is ADIF1..., bit 3 is ADIF3. * Bit 4 is ADCMPO0, bit 5 is ADCMPO1, bit 6 is ADCMPF0, bit 7 is ADCMPF1. * @return Return the user-specified interrupt flags. * @details This macro is used to get the user-specified interrupt flags. * \hideinitializer */ #define EADC_GET_INT_FLAG(eadc, u32Mask) ((eadc)->STATUS1 & (u32Mask)) /** * @brief Get the user-specified sample module overrun flags. * @param[in] eadc Base address of EADC module. * @param[in] u32ModuleMask The combination of sample module overrun status bits. Each bit corresponds to a sample module overrun status, valid range are between 1~0xFFFF. * @return Return the user-specified sample module overrun flags. * @details This macro is used to get the user-specified sample module overrun flags. * \hideinitializer */ #define EADC_GET_SAMPLE_MODULE_OV_FLAG(eadc, u32ModuleMask) (((eadc)->STATUS0 >> EADC_STATUS0_OV_Pos) & u32ModuleMask) /** * @brief Clear the selected interrupt status bits. * @param[in] eadc Base address of EADC module. * @param[in] u32Mask The combination of compare interrupt status bits. Each bit corresponds to a compare interrupt status. * Bit 0 is ADIF0, bit 1 is ADIF1..., bit 3 is ADIF3. * Bit 4 is ADCMPO0, bit 5 is ADCMPO1, bit 6 is ADCMPF0, bit 7 is ADCMPF1. * @return None * @details This macro is used to clear clear the selected interrupt status bits. * \hideinitializer */ #define EADC_CLR_INT_FLAG(eadc, u32Mask) ((eadc)->STATUS1 = (u32Mask)) /** * @brief Check all sample module A/D result data register overrun flags. * @param[in] eadc Base address of EADC module. * @retval 0 None of sample module data register overrun flag is set to 1. * @retval 1 Any one of sample module data register overrun flag is set to 1. * @details The AOV bit (EADC_STATUS1[27]) will keep 1 when any one of sample module data register overrun flag OVn (EADC_ADxDATn[16]) is set to 1. * \hideinitializer */ #define EADC_IS_DATA_OV(eadc) (((eadc)->STATUS1 & EADC_STATUS1_AOV_Msk) >> EADC_STATUS1_AOV_Pos) /** * @brief Check all sample module A/D result data register valid flags. * @param[in] eadc Base address of EADC module. * @retval 0 None of sample module data register valid flag is set to 1. * @retval 1 Any one of sample module data register valid flag is set to 1. * @details The AVALID bit (EADC_STATUS1[26]) will keep 1 when any one of sample module data register valid flag VALIDn (EADC_ADxDATn[17]) is set to 1. * \hideinitializer */ #define EADC_IS_DATA_VALID(eadc) (((eadc)->STATUS1 & EADC_STATUS1_AVALID_Msk) >> EADC_STATUS1_AVALID_Pos) /** * @brief Check all A/D sample module start of conversion overrun flags. * @param[in] eadc Base address of EADC module. * @retval 0 None of sample module event overrun flag is set to 1. * @retval 1 Any one of sample module event overrun flag is set to 1. * @details The STOVF bit (EADC_STATUS1[25]) will keep 1 when any one of sample module event overrun flag SPOVFn (EADC_OVSTS[n]) is set to 1. * \hideinitializer */ #define EADC_IS_SAMPLE_MODULE_OV(eadc) (((eadc)->STATUS1 & EADC_STATUS1_STOVF_Msk) >> EADC_STATUS1_STOVF_Pos) /** * @brief Check all A/D interrupt flag overrun bits. * @param[in] eadc Base address of EADC module. * @retval 0 None of ADINT interrupt flag is overwritten to 1. * @retval 1 Any one of ADINT interrupt flag is overwritten to 1. * @details The ADOVIF bit (EADC_STATUS1[24]) will keep 1 when any one of ADINT interrupt flag ADFOVn (EADC_ADIFOV[3:0]) is overwritten to 1. * \hideinitializer */ #define EADC_IS_INT_FLAG_OV(eadc) (((eadc)->STATUS1 & EADC_STATUS1_ADOVIF_Msk) >> EADC_STATUS1_ADOVIF_Pos) /** * @brief Get the busy state of EADC. * @param[in] eadc Base address of EADC module. * @param[in] converter Which converter, it should be 0 or 1. * @retval 0 Idle state. * @retval 1 Busy state. * @details This macro is used to read BUSY0(EADC_STATUS1[8]) or BUSY1(EADC_STATUS1[16]) to get busy state. * \hideinitializer */ #define EADC_IS_BUSY(eadc, converter) (((((eadc)->STATUS1 >> (EADC_STATUS1_BUSY0_Pos + (8 * converter)))) & EADC_STATUS1_BUSY0_Msk) ) /** * @brief Configure the comparator 0 and enable it. * @param[in] eadc Base address of EADC module. * @param[in] u32ModuleNum specifies the compare sample module, valid values are: * - \ref CMP_EADC0_SAMPLE_MODULE0 : EADC0 SAMPLE module 0 * - \ref CMP_EADC0_SAMPLE_MODULE1 : EADC0 SAMPLE module 1 * - \ref CMP_EADC0_SAMPLE_MODULE2 : EADC0 SAMPLE module 2 * - \ref CMP_EADC0_SAMPLE_MODULE3 : EADC0 SAMPLE module 3 * - \ref CMP_EADC1_SAMPLE_MODULE0 : EADC1 SAMPLE module 0 * - \ref CMP_EADC1_SAMPLE_MODULE1 : EADC1 SAMPLE module 1 * - \ref CMP_EADC1_SAMPLE_MODULE2 : EADC1 SAMPLE module 2 * - \ref CMP_EADC1_SAMPLE_MODULE3 : EADC1 SAMPLE module 3 * @param[in] u32Condition specifies the compare condition. Valid values are: * - \ref EADC_CMP_CMPCOND_LESS_THAN :The compare condition is "less than the compare value" * - \ref EADC_CMP_CMPCOND_GREATER_OR_EQUAL :The compare condition is "greater than or equal to the compare value * @param[in] u16CMPData specifies the compare value, valid range are between 0~0xFFF. * @param[in] u32MatchCount specifies the match count setting, valid range are between 0~0xF. * @return None * @details For example, ADC_ENABLE_CMP0(EADC, 5, ADC_ADCMPR_CMPCOND_GREATER_OR_EQUAL, 0x800, 10, EADC_CMP_CMPWEN_DISABLE, EADC_CMP_ADCMPIE_ENABLE); * Means EADC will assert comparator 0 flag if sample module 5 conversion result is greater or * equal to 0x800 for 10 times continuously, and a compare interrupt request is generated. * \hideinitializer */ #define EADC_ENABLE_CMP0(eadc,\ u32ModuleNum,\ u32Condition,\ u16CMPData,\ u32MatchCount) ((eadc)->CMP[0] |=(((u32ModuleNum) << EADC_CMP0_CMPSPL_Pos)|\ (u32Condition) |\ ((u16CMPData) << EADC_CMP0_CMPDAT_Pos)| \ (((u32MatchCount) - 1) << EADC_CMP0_CMPMCNT_Pos)|\ EADC_CMP0_ADCMPEN_Msk)) /** * @brief Configure the comparator 1 and enable it. * @param[in] eadc Base address of EADC module. * @param[in] u32ModuleNum specifies the compare sample module, valid values are: * - \ref CMP_EADC0_SAMPLE_MODULE0 : EADC0 SAMPLE module 0 * - \ref CMP_EADC0_SAMPLE_MODULE1 : EADC0 SAMPLE module 1 * - \ref CMP_EADC0_SAMPLE_MODULE2 : EADC0 SAMPLE module 2 * - \ref CMP_EADC0_SAMPLE_MODULE3 : EADC0 SAMPLE module 3 * - \ref CMP_EADC1_SAMPLE_MODULE0 : EADC1 SAMPLE module 0 * - \ref CMP_EADC1_SAMPLE_MODULE1 : EADC1 SAMPLE module 1 * - \ref CMP_EADC1_SAMPLE_MODULE2 : EADC1 SAMPLE module 2 * - \ref CMP_EADC1_SAMPLE_MODULE3 : EADC1 SAMPLE module 3 * @param[in] u32Condition specifies the compare condition. Valid values are: * - \ref EADC_CMP_CMPCOND_LESS_THAN :The compare condition is "less than the compare value" * - \ref EADC_CMP_CMPCOND_GREATER_OR_EQUAL :The compare condition is "greater than or equal to the compare value * @param[in] u16CMPData specifies the compare value, valid range are between 0~0xFFF. * @param[in] u32MatchCount specifies the match count setting, valid range are between 0~0xF. * @return None * @details For example, ADC_ENABLE_CMP1(EADC, 5, ADC_ADCMPR_CMPCOND_GREATER_OR_EQUAL, 0x800, 10, EADC_CMP_ADCMPIE_ENABLE); * Means EADC will assert comparator 1 flag if sample module 5 conversion result is greater or * equal to 0x800 for 10 times continuously, and a compare interrupt request is generated. * \hideinitializer */ #define EADC_ENABLE_CMP1(eadc,\ u32ModuleNum,\ u32Condition,\ u16CMPData,\ u32MatchCount) ((eadc)->CMP[1] |=(((u32ModuleNum) << EADC_CMP1_CMPSPL_Pos)|\ (u32Condition) |\ ((u16CMPData) << EADC_CMP1_CMPDAT_Pos)| \ (((u32MatchCount) - 1) << EADC_CMP1_CMPMCNT_Pos)|\ EADC_CMP1_ADCMPEN_Msk)) /** * @brief Enable the compare interrupt. * @param[in] eadc Base address of EADC module. * @param[in] u32CMP Specifies the compare register, valid value are 0 and 1. * @return None * @details If the compare function is enabled and the compare condition matches the setting of CMPCOND (EADC_CMPn[2], n=0~1) * and CMPMCNT (EADC_CMPn[11:8], n=0~1), ADCMPFn (EADC_STATUS1[7:6], n=0~1) will be asserted, in the meanwhile, * if ADCMPIE is set to 1, a compare interrupt request is generated. * \hideinitializer */ #define EADC_ENABLE_CMP_INT(eadc, u32CMP) ((eadc)->CMP[(u32CMP)] |= EADC_CMP0_ADCMPIE_Msk) /** * @brief Disable the compare interrupt. * @param[in] eadc Base address of EADC module. * @param[in] u32CMP Specifies the compare register, valid value are 0 and 1. * @return None * @details This macro is used to disable the compare interrupt. * \hideinitializer */ #define EADC_DISABLE_CMP_INT(eadc, u32CMP) ((eadc)->CMP[(u32CMP)] &= ~EADC_CMP0_ADCMPIE_Msk) /** * @brief Disable comparator 0. * @param[in] eadc Base address of EADC module. * @return None * @details This macro is used to disable comparator 0. * \hideinitializer */ #define EADC_DISABLE_CMP0(eadc) ((eadc)->CMP[0] = 0) /** * @brief Disable comparator 1. * @param[in] eadc Base address of EADC module. * @return None * @details This macro is used to disable comparator 1. * \hideinitializer */ #define EADC_DISABLE_CMP1(eadc) ((eadc)->CMP[1] = 0) /** * @brief Enable simultaneous mode. * @param[in] eadc Base address of EADC module. * @param[in] u32ModuleMask The combination of sample module. Each bit corresponds to a sample module. * This parameter decides which sample module will be set to simultaneous mode, valid range are between 1~0xFF. * Bit 0 is sample module 0, bit 1 is sample module 1..., bit 7 is sample module 7. * @return None * @details This macro is used to set selected sample modules to be simultaneous mode. * \hideinitializer */ #define EADC_ENABLE_SIMULTANEOUS(eadc,u32ModuleMask) ((eadc)->SIMUSEL |= (u32ModuleMask)) /** * @brief Disable simultaneous mode. * @param[in] eadc Base address of EADC module. * @param[in] u32ModuleMask The combination of sample module. Each bit corresponds to a sample module. * This parameter decides which sample module will be set to disable simultaneous mode, valid range are between 1~0xFF. * Bit 0 is sample module 0, bit 1 is sample module 1..., bit 7 is sample module 7. * @return None * @details This macro is used to set selected sample modules to disable simultaneous mode. * \hideinitializer */ #define EADC_DISABLE_SIMULTANEOUS(eadc,u32ModuleMask) ((eadc)->SIMUSEL &= ~(u32ModuleMask)) /** * @brief Enable PWM and EPWM trigger trigger EADC condition. * @param[in] eadc Base address of EADC module. * @param[in] u32ADTriggerModuleNum Decides the sample module number, valid values are: * - \ref EADC0_TRIGGEREN0 : AD trigger condition for SAMPLE00 * - \ref EADC0_TRIGGEREN1 : AD trigger condition for SAMPLE01 * - \ref EADC0_TRIGGEREN2 : AD trigger condition for SAMPLE02 * - \ref EADC0_TRIGGEREN3 : AD trigger condition for SAMPLE03 * - \ref EADC1_TRIGGEREN0 : AD trigger condition for SAMPLE10 * - \ref EADC1_TRIGGEREN1 : AD trigger condition for SAMPLE11 * - \ref EADC1_TRIGGEREN2 : AD trigger condition for SAMPLE12 * - \ref EADC1_TRIGGEREN3 : AD trigger condition for SAMPLE13 * @param[in] u32TriggerMask Decides the PWM and EPWM trigger EADC condition, valid range are between 0~0xFFFFFFFF. * @return None * @details This macro is used to enable PWM and EPWM trigger EADC condition. */ #define EADC_EnablePWMTriggerCondition(eadc,u32ADTriggerModuleNum,u32TriggerMask) (*(__IO uint32_t *)(&(eadc)->AD0TRGEN0 + (u32ADTriggerModuleNum)) |= (u32TriggerMask)) /** * @brief Disable PWM and EPWM trigger trigger EADC condition. * @param[in] eadc Base address of EADC module. * @param[in] u32ADTriggerModuleNum Decides the sample module number, valid values are: * - \ref EADC0_TRIGGEREN0 : AD trigger condition for SAMPLE00 * - \ref EADC0_TRIGGEREN1 : AD trigger condition for SAMPLE01 * - \ref EADC0_TRIGGEREN2 : AD trigger condition for SAMPLE02 * - \ref EADC0_TRIGGEREN3 : AD trigger condition for SAMPLE03 * - \ref EADC1_TRIGGEREN0 : AD trigger condition for SAMPLE10 * - \ref EADC1_TRIGGEREN1 : AD trigger condition for SAMPLE11 * - \ref EADC1_TRIGGEREN2 : AD trigger condition for SAMPLE12 * - \ref EADC1_TRIGGEREN3 : AD trigger condition for SAMPLE13 * @param[in] u32TriggerMask Decides the PWM and EPWM trigger EADC condition, valid range are between 0~0xFFFFFFFF. * @return None * @details This macro is used to disable PWM and EPWM trigger EADC condition. */ #define EADC_DisablePWMTriggerCondition(eadc,u32ADTriggerModuleNum,u32TriggerMask) (*(__IO uint32_t *)(&(eadc)->AD0TRGEN0 + (u32ADTriggerModuleNum)) |= (u32TriggerMask)) /*---------------------------------------------------------------------------------------------------------*/ /* Define EADC functions prototype */ /*---------------------------------------------------------------------------------------------------------*/ void EADC_Open(EADC_T *eadc, uint32_t u32InputMode); void EADC_Close(EADC_T *eadc); void EADC_ConfigSampleModule(EADC_T *eadc, \ uint32_t u32ModuleNum, \ uint32_t u32TriggerSource, \ uint32_t u32Channel); void EADC_SetTriggerDelayTime(EADC_T *eadc, \ uint32_t u32ModuleNum, \ uint32_t u32TriggerDelayTime, \ uint32_t u32DelayClockDivider); void EADC_SetExtendSampleTime(EADC_T *eadc, uint32_t u32ModuleNum, uint32_t u32ExtendSampleTime); /*@}*/ /* end of group NUC472_442_EADC_EXPORTED_FUNCTIONS */ /*@}*/ /* end of group NUC472_442_EADC_Driver */ /*@}*/ /* end of group NUC472_442_Device_Driver */ #ifdef __cplusplus } #endif #endif //__EADC_H__ /*** (C) COPYRIGHT 2014 Nuvoton Technology Corp. ***/