/* * This file is part of FH8620 BSP for RT-Thread distribution. * * Copyright (c) 2016 Shanghai Fullhan Microelectronics Co., Ltd. * All rights reserved * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. * * Visit http://www.fullhan.com to get contact with Fullhan. * * Change Logs: * Date Author Notes */ #ifndef FH_I2C_H_ #define FH_I2C_H_ #include "fh_def.h" #define OFFSET_I2C_CON (0x0000) #define OFFSET_I2C_TAR (0x0004) #define OFFSET_I2C_SAR (0x0008) #define OFFSET_I2C_HS_MADDR (0x000C) #define OFFSET_I2C_DATA_CMD (0x0010) #define OFFSET_I2C_SS_SCL_HCNT (0x0014) #define OFFSET_I2C_SS_SCL_LCNT (0x0018) #define OFFSET_I2C_FS_SCL_HCNT (0x001C) #define OFFSET_I2C_FS_SCL_LCNT (0x0020) #define OFFSET_I2C_HS_SCL_HCNT (0x0024) #define OFFSET_I2C_HS_SCL_LCNT (0x0028) #define OFFSET_I2C_INTR_STAT (0x002c) #define OFFSET_I2C_INTR_MASK (0x0030) #define OFFSET_I2C_RAW_INTR_STAT (0x0034) #define OFFSET_I2C_RX_TL (0x0038) #define OFFSET_I2C_TX_TL (0x003c) #define OFFSET_I2C_CLR_INTR (0x0040) #define OFFSET_I2C_CLR_RX_UNDER (0x0044) #define OFFSET_I2C_CLR_RX_OVER (0x0048) #define OFFSET_I2C_CLR_TX_OVER (0x004c) #define OFFSET_I2C_CLR_RD_REQ (0x0050) #define OFFSET_I2C_CLR_TX_ABRT (0x0054) #define OFFSET_I2C_CLR_RX_DONE (0x0058) #define OFFSET_I2C_CLR_ACTIVITY (0x005c) #define OFFSET_I2C_CLR_STOP_DET (0x0060) #define OFFSET_I2C_CLR_START_DET (0x0064) #define OFFSET_I2C_CLR_GEN_CALL (0x0068) #define OFFSET_I2C_ENABLE (0x006c) #define OFFSET_I2C_STATUS (0x0070) #define OFFSET_I2C_TXFLR (0x0074) #define OFFSET_I2C_RXFLR (0x0078) #define OFFSET_I2C_DMA_CR (0x0088) #define OFFSET_I2C_DMA_TDLR (0x008c) #define OFFSET_I2C_DMA_RDLR (0x0090) #define OFFSET_I2C_COMP_PARAM1 (0x00f4) #define OFFSET_I2C_TX_ABRT_SOURCE (0x0080) #define I2C_M_TEN 0x0100 /* this is a ten bit chip address */ #define I2C_M_RD 0x0001 /* read data, from slave to master */ #define I2C_M_NOSTART 0x4000 /* if I2C_FUNC_PROTOCOL_MANGLING */ #define I2C_M_REV_DIR_ADDR 0x2000 /* if I2C_FUNC_PROTOCOL_MANGLING */ #define I2C_M_IGNORE_NAK 0x1000 /* if I2C_FUNC_PROTOCOL_MANGLING */ #define I2C_M_NO_RD_ACK 0x0800 /* if I2C_FUNC_PROTOCOL_MANGLING */ #define I2C_M_RECV_LEN 0x0400 /* length will be first received byte */ #define DW_IC_CON_MASTER 0x1 #define DW_IC_CON_SPEED_STD 0x2 #define DW_IC_CON_SPEED_FAST 0x4 #define DW_IC_CON_10BITADDR_MASTER 0x10 #define DW_IC_CON_RESTART_EN 0x20 #define DW_IC_CON_SLAVE_DISABLE 0x40 #define DW_IC_INTR_RX_UNDER 0x001 #define DW_IC_INTR_RX_OVER 0x002 #define DW_IC_INTR_RX_FULL 0x004 #define DW_IC_INTR_TX_OVER 0x008 #define DW_IC_INTR_TX_EMPTY 0x010 #define DW_IC_INTR_RD_REQ 0x020 #define DW_IC_INTR_TX_ABRT 0x040 #define DW_IC_INTR_RX_DONE 0x080 #define DW_IC_INTR_ACTIVITY 0x100 #define DW_IC_INTR_STOP_DET 0x200 #define DW_IC_INTR_START_DET 0x400 #define DW_IC_INTR_GEN_CALL 0x800 #define DW_IC_INTR_DEFAULT_MASK (DW_IC_INTR_RX_FULL | \ DW_IC_INTR_TX_EMPTY | \ DW_IC_INTR_TX_ABRT | \ DW_IC_INTR_STOP_DET) #define DW_IC_STATUS_ACTIVITY 0x1 #define DW_IC_STATUS_MASTER_ACTIVITY 0x20 #define DW_IC_ERR_TX_ABRT 0x1 /* * status codes */ #define STATUS_IDLE 0x0 #define STATUS_WRITE_IN_PROGRESS 0x1 #define STATUS_READ_IN_PROGRESS 0x2 #define TIMEOUT 20 /* ms */ /* * hardware abort codes from the DW_IC_TX_ABRT_SOURCE register * * only expected abort codes are listed here * refer to the datasheet for the full list */ #define ABRT_7B_ADDR_NOACK 0 #define ABRT_10ADDR1_NOACK 1 #define ABRT_10ADDR2_NOACK 2 #define ABRT_TXDATA_NOACK 3 #define ABRT_GCALL_NOACK 4 #define ABRT_GCALL_READ 5 #define ABRT_SBYTE_ACKDET 7 #define ABRT_SBYTE_NORSTRT 9 #define ABRT_10B_RD_NORSTRT 10 #define ABRT_MASTER_DIS 11 #define ARB_LOST 12 #define DW_IC_TX_ABRT_7B_ADDR_NOACK (1UL << ABRT_7B_ADDR_NOACK) #define DW_IC_TX_ABRT_10ADDR1_NOACK (1UL << ABRT_10ADDR1_NOACK) #define DW_IC_TX_ABRT_10ADDR2_NOACK (1UL << ABRT_10ADDR2_NOACK) #define DW_IC_TX_ABRT_TXDATA_NOACK (1UL << ABRT_TXDATA_NOACK) #define DW_IC_TX_ABRT_GCALL_NOACK (1UL << ABRT_GCALL_NOACK) #define DW_IC_TX_ABRT_GCALL_READ (1UL << ABRT_GCALL_READ) #define DW_IC_TX_ABRT_SBYTE_ACKDET (1UL << ABRT_SBYTE_ACKDET) #define DW_IC_TX_ABRT_SBYTE_NORSTRT (1UL << ABRT_SBYTE_NORSTRT) #define DW_IC_TX_ABRT_10B_RD_NORSTRT (1UL << ABRT_10B_RD_NORSTRT) #define DW_IC_TX_ABRT_MASTER_DIS (1UL << ABRT_MASTER_DIS) #define DW_IC_TX_ARB_LOST (1UL << ARB_LOST) #define DW_IC_TX_ABRT_NOACK (DW_IC_TX_ABRT_7B_ADDR_NOACK | \ DW_IC_TX_ABRT_10ADDR1_NOACK | \ DW_IC_TX_ABRT_10ADDR2_NOACK | \ DW_IC_TX_ABRT_TXDATA_NOACK | \ DW_IC_TX_ABRT_GCALL_NOACK) static char *abort_sources[] = { [ABRT_7B_ADDR_NOACK] = "slave address not acknowledged (7bit mode)", [ABRT_10ADDR1_NOACK] = "first address byte not acknowledged (10bit mode)", [ABRT_10ADDR2_NOACK] = "second address byte not acknowledged (10bit mode)", [ABRT_TXDATA_NOACK] = "data not acknowledged", [ABRT_GCALL_NOACK] = "no acknowledgement for a general call", [ABRT_GCALL_READ] = "read after general call", [ABRT_SBYTE_ACKDET] = "start byte acknowledged", [ABRT_SBYTE_NORSTRT] = "trying to send start byte when restart is disabled", [ABRT_10B_RD_NORSTRT] = "trying to read when restart is disabled (10bit mode)", [ABRT_MASTER_DIS] = "trying to use disabled adapter", [ARB_LOST] = "lost arbitration", }; /* i2c interrput definition */ #define M_GEN_CALL (1<<11) #define M_START_DET (1<<10) #define M_STOP_DET (1<<9) #define M_ACTIVITY (1<<8) #define M_RX_DONE (1<<7) #define M_TX_ABRT (1<<6) #define M_RD_REQ (1<<5) #define M_TX_EMPTY (1<<4) #define M_TX_OVER (1<<3) #define M_RX_FULL (1<<2) #define M_RX_OVER (1<<1) #define M_RX_UNDER (1<<0) #define M_NONE (0) struct i2c_config { int speed_mode; UINT32 tx_fifo_depth; UINT32 rx_fifo_depth; }; struct fh_i2c_obj { UINT32 id; UINT32 irq; UINT32 base; UINT32 input_clock; UINT32 abort_source; struct i2c_config config; }; void I2C_Init(struct fh_i2c_obj *i2c_obj); inline void I2C_Enable(struct fh_i2c_obj *i2c_obj, int enable); inline void I2C_SetSlaveAddress(struct fh_i2c_obj *i2c_obj, rt_uint16_t addr); inline UINT32 I2C_GetTransmitFifoLevel(struct fh_i2c_obj *i2c_obj); inline UINT32 I2C_GetReceiveFifoLevel(struct fh_i2c_obj *i2c_obj); inline UINT32 I2C_SetTransmitThreshold(struct fh_i2c_obj *i2c_obj, int txtl); int I2C_HandleTxAbort(struct fh_i2c_obj *i2c_obj); UINT32 I2C_ClearAndGetInterrupts(struct fh_i2c_obj *i2c_obj); inline void I2C_SetInterruptMask(struct fh_i2c_obj *i2c_obj, UINT32 mask); inline UINT32 I2C_GetInterruptMask(struct fh_i2c_obj *i2c_obj); inline void I2C_SetDataCmd(struct fh_i2c_obj *i2c_obj, UINT32 reg); inline UINT8 I2C_GetData(struct fh_i2c_obj *i2c_obj); int I2C_WaitMasterIdle(struct fh_i2c_obj *i2c_obj); int I2C_WaitDeviceIdle(struct fh_i2c_obj *i2c_obj); #endif /* FH_I2C_H_ */