/* * Copyright (c) 2006-2022, RT-Thread Development Team * * SPDX-License-Identifier: Apache-2.0 * * Change Logs: * Date Author Notes * 2020-10-14 wangqiang the first version * 2022-08-29 xjy198903 add rt1170 support */ #include #ifdef PHY_USING_KSZ8081 #include #include "drv_gpio.h" #include "drv_mdio.h" /******************************************************************************* * Definitions ******************************************************************************/ /*! @brief Defines the PHY registers. */ #define PHY_BASICCONTROL_REG 0x00U /*!< The PHY basic control register. */ #define PHY_BASICSTATUS_REG 0x01U /*!< The PHY basic status register. */ #define PHY_ID1_REG 0x02U /*!< The PHY ID one register. */ #define PHY_ID2_REG 0x03U /*!< The PHY ID two register. */ #define PHY_AUTONEG_ADVERTISE_REG 0x04U /*!< The PHY auto-negotiate advertise register. */ #define PHY_CONTROL1_REG 0x1EU /*!< The PHY control one register. */ #define PHY_CONTROL2_REG 0x1FU /*!< The PHY control two register. */ #define PHY_CONTROL_ID1 0x22U /*!< The PHY ID1*/ /*! @brief Defines the mask flag in basic control register. */ #define PHY_BCTL_DUPLEX_MASK 0x0100U /*!< The PHY duplex bit mask. */ #define PHY_BCTL_RESTART_AUTONEG_MASK 0x0200U /*!< The PHY restart auto negotiation mask. */ #define PHY_BCTL_AUTONEG_MASK 0x1000U /*!< The PHY auto negotiation bit mask. */ #define PHY_BCTL_SPEED_MASK 0x2000U /*!< The PHY speed bit mask. */ #define PHY_BCTL_LOOP_MASK 0x4000U /*!< The PHY loop bit mask. */ #define PHY_BCTL_RESET_MASK 0x8000U /*!< The PHY reset bit mask. */ #define PHY_BCTL_SPEED_100M_MASK 0x2000U /*!< The PHY 100M speed mask. */ /*!@brief Defines the mask flag of operation mode in control two register*/ #define PHY_CTL2_REMOTELOOP_MASK 0x0004U /*!< The PHY remote loopback mask. */ #define PHY_CTL2_REFCLK_SELECT_MASK 0x0080U /*!< The PHY RMII reference clock select. */ #define PHY_CTL1_10HALFDUPLEX_MASK 0x0001U /*!< The PHY 10M half duplex mask. */ #define PHY_CTL1_100HALFDUPLEX_MASK 0x0002U /*!< The PHY 100M half duplex mask. */ #define PHY_CTL1_10FULLDUPLEX_MASK 0x0005U /*!< The PHY 10M full duplex mask. */ #define PHY_CTL1_100FULLDUPLEX_MASK 0x0006U /*!< The PHY 100M full duplex mask. */ #define PHY_CTL1_SPEEDUPLX_MASK 0x0007U /*!< The PHY speed and duplex mask. */ #define PHY_CTL1_ENERGYDETECT_MASK 0x10U /*!< The PHY signal present on rx differential pair. */ #define PHY_CTL1_LINKUP_MASK 0x100U /*!< The PHY link up. */ #define PHY_LINK_READY_MASK (PHY_CTL1_ENERGYDETECT_MASK | PHY_CTL1_LINKUP_MASK) /*! @brief Defines the mask flag in basic status register. */ #define PHY_BSTATUS_LINKSTATUS_MASK 0x0004U /*!< The PHY link status mask. */ #define PHY_BSTATUS_AUTONEGABLE_MASK 0x0008U /*!< The PHY auto-negotiation ability mask. */ #define PHY_BSTATUS_AUTONEGCOMP_MASK 0x0020U /*!< The PHY auto-negotiation complete mask. */ /*! @brief Defines the mask flag in PHY auto-negotiation advertise register. */ #define PHY_100BaseT4_ABILITY_MASK 0x200U /*!< The PHY have the T4 ability. */ #define PHY_100BASETX_FULLDUPLEX_MASK 0x100U /*!< The PHY has the 100M full duplex ability.*/ #define PHY_100BASETX_HALFDUPLEX_MASK 0x080U /*!< The PHY has the 100M full duplex ability.*/ #define PHY_10BASETX_FULLDUPLEX_MASK 0x040U /*!< The PHY has the 10M full duplex ability.*/ #define PHY_10BASETX_HALFDUPLEX_MASK 0x020U /*!< The PHY has the 10M full duplex ability.*/ /*! @brief Defines the timeout macro. */ #define PHY_TIMEOUT_COUNT 0x3FFFFFFU /* defined the Reset pin, PORT and PIN config by menuconfig */ #ifdef SOC_IMXRT1170_SERIES #define RESET_PIN GET_PIN(PHY_RESET_KSZ8081_PORT, PHY_RESET_KSZ8081_PIN) #else #define RESET_PIN GET_PIN(PHY_RESET_PORT, PHY_RESET_PIN) #endif /******************************************************************************* * Prototypes ******************************************************************************/ /******************************************************************************* * Variables ******************************************************************************/ static struct rt_phy_device phy_ksz8081; /******************************************************************************* * Code ******************************************************************************/ static inline rt_bool_t read_reg(rt_mdio_t *bus, rt_uint32_t addr, rt_uint32_t reg_id, rt_uint32_t *value) { if (4 != bus->ops->read(bus, addr, reg_id, value, 4)) { return RT_FALSE; } return RT_TRUE; } static inline rt_bool_t write_reg(rt_mdio_t *bus, rt_uint32_t addr, rt_uint32_t reg_id, rt_uint32_t value) { if (4 != bus->ops->write(bus, addr, reg_id, &value, 4)) { return RT_FALSE; } return RT_TRUE; } static rt_phy_status rt_phy_init(void *object, rt_uint32_t phy_addr, rt_uint32_t src_clock_hz) { rt_bool_t ret; rt_phy_status result; rt_uint32_t counter = PHY_TIMEOUT_COUNT; rt_uint32_t id_reg = 0; rt_uint32_t time_delay; rt_uint32_t bss_reg; rt_uint32_t ctl_reg = 0; // reset phy device by gpio rt_pin_mode(RESET_PIN, PIN_MODE_OUTPUT); rt_pin_write(RESET_PIN, PIN_LOW); rt_thread_mdelay(100); rt_pin_write(RESET_PIN, PIN_HIGH); rt_mdio_t *mdio_bus = rt_hw_mdio_register(object, "phy_mdio"); if (RT_NULL == mdio_bus) { return PHY_STATUS_FAIL; } phy_ksz8081.bus = mdio_bus; phy_ksz8081.addr = phy_addr; ret = mdio_bus->ops->init(mdio_bus, src_clock_hz); if ( !ret ) { return PHY_STATUS_FAIL; } /* Initialization after PHY stars to work. */ while ((id_reg != PHY_CONTROL_ID1) && (counter != 0)) { phy_ksz8081.ops->read(PHY_ID1_REG, &id_reg); counter--; } if (!counter) { return PHY_STATUS_FAIL; } /* Reset PHY. */ counter = PHY_TIMEOUT_COUNT; result = phy_ksz8081.ops->write(PHY_BASICCONTROL_REG, PHY_BCTL_RESET_MASK); if (PHY_STATUS_OK == result) { #if defined(FSL_FEATURE_PHYKSZ8081_USE_RMII50M_MODE) rt_uint32_t data = 0; result = phy_ksz8081.ops->read(PHY_CONTROL2_REG, &data); if (PHY_STATUS_FAIL == result) { return PHY_STATUS_FAIL; } result = phy_ksz8081.ops->write(PHY_CONTROL2_REG, (data | PHY_CTL2_REFCLK_SELECT_MASK)); if (PHY_STATUS_FAIL == result) { return PHY_STATUS_FAIL; } #endif /* FSL_FEATURE_PHYKSZ8081_USE_RMII50M_MODE */ /* Set the negotiation. */ result = phy_ksz8081.ops->write(PHY_AUTONEG_ADVERTISE_REG, (PHY_100BASETX_FULLDUPLEX_MASK | PHY_100BASETX_HALFDUPLEX_MASK | PHY_10BASETX_FULLDUPLEX_MASK | PHY_10BASETX_HALFDUPLEX_MASK | 0x1U)); if (PHY_STATUS_OK == result) { result = phy_ksz8081.ops->write(PHY_BASICCONTROL_REG, (PHY_BCTL_AUTONEG_MASK | PHY_BCTL_RESTART_AUTONEG_MASK)); if (PHY_STATUS_OK == result) { /* Check auto negotiation complete. */ while (counter--) { result = phy_ksz8081.ops->read(PHY_BASICSTATUS_REG, &bss_reg); if (PHY_STATUS_OK == result) { phy_ksz8081.ops->read(PHY_CONTROL1_REG, &ctl_reg); if (((bss_reg & PHY_BSTATUS_AUTONEGCOMP_MASK) != 0) && (ctl_reg & PHY_LINK_READY_MASK)) { /* Wait a moment for Phy status stable. */ for (time_delay = 0; time_delay < PHY_TIMEOUT_COUNT; time_delay++) { __ASM("nop"); } break; } } if (!counter) { return PHY_STATUS_FAIL; } } } } } return PHY_STATUS_OK; } static rt_phy_status rt_phy_read(rt_uint32_t reg, rt_uint32_t *data) { rt_mdio_t *mdio_bus = phy_ksz8081.bus; rt_uint32_t device_id = phy_ksz8081.addr; if (read_reg(mdio_bus, device_id, reg, data)) { return PHY_STATUS_OK; } return PHY_STATUS_FAIL; } static rt_phy_status rt_phy_write(rt_uint32_t reg, rt_uint32_t data) { rt_mdio_t *mdio_bus = phy_ksz8081.bus; rt_uint32_t device_id = phy_ksz8081.addr; if (write_reg(mdio_bus, device_id, reg, data)) { return PHY_STATUS_OK; } return PHY_STATUS_FAIL; } static rt_phy_status rt_phy_loopback(rt_uint32_t mode, rt_uint32_t speed, rt_bool_t enable) { rt_uint32_t data = 0; rt_phy_status result; /* Set the loop mode. */ if (enable) { if (PHY_LOCAL_LOOP == mode) { if (PHY_SPEED_100M == speed) { data = PHY_BCTL_SPEED_100M_MASK | PHY_BCTL_DUPLEX_MASK | PHY_BCTL_LOOP_MASK; } else { data = PHY_BCTL_DUPLEX_MASK | PHY_BCTL_LOOP_MASK; } return phy_ksz8081.ops->write(PHY_BASICCONTROL_REG, data); } else { /* First read the current status in control register. */ result = phy_ksz8081.ops->read(PHY_CONTROL2_REG, &data); if (PHY_STATUS_OK == result) { return phy_ksz8081.ops->write(PHY_CONTROL2_REG, (data | PHY_CTL2_REMOTELOOP_MASK)); } } } else { /* Disable the loop mode. */ if (PHY_LOCAL_LOOP == mode) { /* First read the current status in control register. */ result = phy_ksz8081.ops->read(PHY_BASICCONTROL_REG, &data); if (PHY_STATUS_OK == result) { data &= ~PHY_BCTL_LOOP_MASK; return phy_ksz8081.ops->write(PHY_BASICCONTROL_REG, (data | PHY_BCTL_RESTART_AUTONEG_MASK)); } } else { /* First read the current status in control one register. */ result = phy_ksz8081.ops->read(PHY_CONTROL2_REG, &data); if (PHY_STATUS_OK == result) { return phy_ksz8081.ops->write(PHY_CONTROL2_REG, (data & ~PHY_CTL2_REMOTELOOP_MASK)); } } } return result; } static rt_phy_status get_link_status(rt_bool_t *status) { rt_phy_status result; rt_uint32_t data; /* Read the basic status register. */ result = phy_ksz8081.ops->read(PHY_BASICSTATUS_REG, &data); if (PHY_STATUS_OK == result) { if (!(PHY_BSTATUS_LINKSTATUS_MASK & data)) { /* link down. */ *status = RT_FALSE; } else { /* link up. */ *status = RT_TRUE; } } return result; } static rt_phy_status get_link_speed_duplex(rt_uint32_t *speed, rt_uint32_t *duplex) { rt_phy_status result = PHY_STATUS_OK; rt_uint32_t data, ctl_reg; /* Read the control two register. */ result = phy_ksz8081.ops->read(PHY_CONTROL1_REG, &ctl_reg); if (PHY_STATUS_OK == result) { data = ctl_reg & PHY_CTL1_SPEEDUPLX_MASK; if ((PHY_CTL1_10FULLDUPLEX_MASK == data) || (PHY_CTL1_100FULLDUPLEX_MASK == data)) { /* Full duplex. */ *duplex = PHY_FULL_DUPLEX; } else { /* Half duplex. */ *duplex = PHY_HALF_DUPLEX; } data = ctl_reg & PHY_CTL1_SPEEDUPLX_MASK; if ((PHY_CTL1_100HALFDUPLEX_MASK == data) || (PHY_CTL1_100FULLDUPLEX_MASK == data)) { /* 100M speed. */ *speed = PHY_SPEED_100M; } else { /* 10M speed. */ *speed = PHY_SPEED_10M; } } return result; } static struct rt_phy_ops phy_ops = { .init = rt_phy_init, .read = rt_phy_read, .write = rt_phy_write, .loopback = rt_phy_loopback, .get_link_status = get_link_status, .get_link_speed_duplex = get_link_speed_duplex, }; static int rt_phy_ksz8081_register( void ) { phy_ksz8081.ops = &phy_ops; rt_hw_phy_register(&phy_ksz8081, "ksz8081"); return 1; } INIT_DEVICE_EXPORT(rt_phy_ksz8081_register); #endif /* PHY_USING_KSZ8081 */