/* * Copyright : (C) 2022 Phytium Information Technology, Inc. * All Rights Reserved. * * This program is OPEN SOURCE software: you can redistribute it and/or modify it * under the terms of the Phytium Public License as published by the Phytium Technology Co.,Ltd, * either version 1.0 of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful,but WITHOUT ANY WARRANTY; * without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the Phytium Public License for more details. * * * FilePath: fsata.c * Date: 2022-02-10 14:55:11 * LastEditTime: 2022-02-18 09:05:09 * Description:  This files is for sata ctrl function implementation * * Modify History: * Ver   Who        Date         Changes * ----- ------     --------    -------------------------------------- */ #include #include #include "ftypes.h" #include "fassert.h" #include "fcache.h" #include "fdebug.h" #include "fsleep.h" #include "fswap.h" #include "fsata.h" #include "fsata_hw.h" /************************** Constant Definitions *****************************/ /**************************** Type Definitions *******************************/ /***************** Macros (Inline Functions) Definitions *********************/ /************************** Function Prototypes ******************************/ /************************** Variable Definitions *****************************/ #define FSATA_DEBUG_TAG "SATA" #define FSATA_ERROR(format, ...) FT_DEBUG_PRINT_E(FSATA_DEBUG_TAG, format, ##__VA_ARGS__) #define FSATA_WARN(format, ...) FT_DEBUG_PRINT_W(FSATA_DEBUG_TAG, format, ##__VA_ARGS__) #define FSATA_INFO(format, ...) FT_DEBUG_PRINT_I(FSATA_DEBUG_TAG, format, ##__VA_ARGS__) #define FSATA_DEBUG(format, ...) FT_DEBUG_PRINT_D(FSATA_DEBUG_TAG, format, ##__VA_ARGS__) #ifndef MAX_SATA_BLOCKS_READ_WRITE #define MAX_SATA_BLOCKS_READ_WRITE 0x80 #endif /* Maximum timeouts for each event */ #define WAIT_MS_RESET 1000 #define WAIT_MS_TFD 20000 /* task file data transfer is not busy */ #define WAIT_MS_DATAIO 20000 #define WAIT_MS_LINKUP 200 static FError FSataAhciDataIO(FSataCtrl *instance_p, u8 port, u8 *fis, int fis_len, u8 *buf, int buf_len, boolean is_ncq, boolean is_write); /** * @name: FSataAhciPortBase * @msg: get port x base address * @param {uintptr} base_address FSata base address * @param {u32} port sata port number * @return {uintptr} port x base address */ static uintptr FSataAhciPortBase(uintptr base_address, u32 port) { return (base_address + 0x100 + (port * 0x80)); } /** * @name: FSataWaitCmdCompleted * @msg: read register status and wait command execution is completed * @param {uintptr} reg FSata register * @param {int} timeout_msec wait timeout value * @param {u32} sign register status flag bit * @return {int} return 0 if command execute success, return -1 if command execute timeout */ static int FSataWaitCmdCompleted(uintptr reg, int timeout_msec, u32 sign) { int i; for (i = 0; (FtIn32(reg)& sign) && (i < timeout_msec); i++) { fsleep_millisec(1); } return (i < timeout_msec) ? 0 : -1; } /** * @name: FSataAhciLinkUp * @msg: check sata ahci port link status * @param {FSataCtrl} *instance_p, pointer to the FSataCtrl instance. * @param {u8} port, port number * @return {int} return FSATA_SUCCESS if successful, return others if failed */ static FError FSataAhciLinkUp(FSataCtrl *instance_p, u8 port) { u32 reg_val; int i = 0; uintptr port_base_addr = instance_p->port[port].port_base_addr; /* * Bring up SATA link. * SATA link bringup time is usually less than 1 ms; only very * rarely has it taken between 1-2 ms. Never seen it above 2 ms. */ while (i < WAIT_MS_LINKUP) { reg_val = FSATA_READ_REG32(port_base_addr, FSATA_PORT_SCR_STAT); if ((reg_val & FSATA_PORT_SCR_STAT_DET_MASK) == FSATA_PORT_SCR_STAT_DET_PHYRDY) return FSATA_SUCCESS; fsleep_microsec(1000); i++; } return FSATA_ERR_TIMEOUT; } /** * @name: FSataAhciInquiry * @msg: inquiry sata information * @param {FSataCtrl} *instance_p, pointer to the FSataCtrl instance. * @param {u8} port, port number * @return {FError} return FSATA_SUCCESS if successful, return others if failed */ static FError FSataAhciInquiry(FSataCtrl *instance_p, u8 port) { FASSERT(instance_p != NULL); FASSERT(instance_p->is_ready == FT_COMPONENT_IS_READY); FError ret = FSATA_SUCCESS; u16 *idbuf; /* 64位需要预留给内存池更大的空间 */ static u16 tmpid[FSATA_ID_WORDS] __attribute__((aligned(128))) = {0}; u8 fis[20]; /* Preset the FIS */ memset(fis, 0, sizeof(fis)); fis[0] = FSATA_FIS_REG_HOST_TO_DEVICE; /* Register Host to Device FIS */ fis[1] = FSATA_FIS_REG_HOST_TO_DEVICE_C; fis[2] = FSATA_CMD_IDENTIFY_DEVICE; /* Command byte. */ ret = FSataAhciDataIO(instance_p, port, fis, sizeof(fis), (u8 *)tmpid, FSATA_ID_WORDS * 2, FALSE, FALSE); if (ret != FSATA_SUCCESS) { FSATA_ERROR("FSataAhciInquiry: command failure. ret = %#x", ret); return FSATA_ERR_OPERATION; } instance_p->ataid[port] = tmpid; return FSATA_SUCCESS; } /** * @name: FSataIdentityCopy * @msg: parse sata Identity information to vendor, product, revision * @param {unsigned char } *dest, pointer to the destination address. * @param {unsigned char } *src, pointer to the source address. * @param {u32} len, parse length. * @return {void} */ static void FSataIdentityCopy(unsigned char *dest, unsigned char *src, u32 len) { FASSERT(dest != NULL); FASSERT(src != NULL); FASSERT(len != 0); u32 start, end; start = 0; while (start < len) { if (src[start] != 0x20)/* character is not sapce */ break; start++; } end = len - 1; while (end > start) { if (src[end] != 0x20)/* character is not sapce */ break; end--; } for (; start <= end; start++) *dest ++ = src[start]; *dest = '\0'; } /** * @name: FSataIdToSectors * @msg: parse sata Identity information to capacity. * @param {u16} *id, pointer to Identity information . * @return {u64} capacity */ static u64 FSataIdToSectors(u16 *id) { if (FSataIdHasLba(id)) { if (FSataIdHasLba48(id)) return FSATA_ID_U64(id, FSATA_ID_LBA48_SECTORS); else return (u64)(FSATA_ID_U32(id, FSATA_ID_LBA_SECTORS)); } else { return 0; } } /** * @name: FSataIdStrCopy * @msg: swap sata Identity information * @param {u16} *dest, pointer to the destination address. * @param {u16} *src, pointer to the source address. * @param {int} len, swap length. * @return {void} */ static void FSataIdStrCopy(u16 *dest, u16 *src, int len) { int i; for (i = 0; i < len / 2; i++) dest[i] = __swab16(src[i]); } /** * @name: FSataBlockToMB * @msg: Converts the number of blocks in 512 byte to 0.1MB * @param {unsigned long} block_count, block count. * @param {unsigned long} mul_by, multiple value. * @param {int} div_by, divided value. * @return {unsigned long} convert value */ static unsigned long FSataBlockToMB(unsigned long block_count, unsigned long mul, int div) { unsigned long bc_quot, bc_rem; /* x * m / d == x / d * m + (x % d) * m / d */ bc_quot = (block_count >> div); /* upper > div bit */ bc_rem = block_count - (bc_quot << div); /* low div bit */ return (bc_quot * mul + ((bc_rem * mul) >> div)); } /** * @name: FSataInfoPrint * @msg: printf sata information * @param {FSataInfo} *dev_desc, pointer to the FSata information. * @return {void} */ void FSataInfoPrint(FSataInfo *dev_desc) { unsigned long lba512; /* number of blocks if 512bytes block size */ if (dev_desc->type == FSATA_DEV_TYPE_UNKNOWN) { FSATA_INFO("not available"); return; } if (dev_desc->if_type == FSATA_IF_TYPE_SCSI) { FSATA_INFO("Vendor: %s Prod: %s Rev: %s", dev_desc->vendor, dev_desc->product, dev_desc->revision); } if (dev_desc->type == FSATA_DEV_TYPE_HARDDISK) { FSATA_INFO("Type: Hard Disk"); } if ((dev_desc->lba > 0L) && (dev_desc->blksz > 0L)) { unsigned long mb, mb_quot, mb_rem, gb, gb_quot, gb_rem; unsigned long lba; lba = dev_desc->lba; lba512 = (lba * (dev_desc->blksz / 512)); /* round to 1 digit */ /* 2048 = (1024 * 1024) / 512 MB */ mb = FSataBlockToMB(lba512, 10, 11); dev_desc->lba512 = lba512; FSATA_INFO("lba512=%lu, mb=%lu", lba512, mb); mb_quot = mb / 10; mb_rem = mb - (10 * mb_quot); gb = mb / 1024; gb_quot = gb / 10; gb_rem = gb - (10 * gb_quot); FSATA_INFO("Capacity: %lu.%lu MB = %lu.%lu GB (%lu x %lu)", mb_quot, mb_rem, gb_quot, gb_rem, (unsigned long)lba, dev_desc->blksz); } else { FSATA_INFO("Capacity: not available"); } } /** * @name: FSataAhciReadCapacity * @msg: get sata capacity by parse instance_p ataid * @param {FSataCtrl} *instance_p, pointer to the FSataCtrl instance. * @param {u8} port, port number * @param {unsigned long} *capacity, pointer to capacity value * @param {unsigned long} *blksz, pointer to block size * @return {FError} return FSATA_SUCCESS if successful, return others if failed */ static FError FSataAhciReadCapacity(FSataCtrl *instance_p, u8 port, unsigned long *capacity, unsigned long *blksz) { FASSERT(instance_p != NULL); FASSERT(instance_p->is_ready == FT_COMPONENT_IS_READY); FError ret = FSATA_SUCCESS; u32 transfer_size; /* number of bytes per iteration */ if (!instance_p->ataid[port]) { FSATA_ERROR("READ CAPACITY10 command failure. " "\tNo ATA info!\n" "\tPlease run command INQUIRY first!"); return FSATA_ERR_OPERATION; } u64 cap64 = FSataIdToSectors(instance_p->ataid[port]); if (cap64 > 0x100000000ULL) cap64 = 0xffffffff; *capacity = (unsigned long)(cap64); if (*capacity != 0xffffffff) { /* Read capacity (10) was sufficient for this drive. */ *blksz = 512; return FSATA_SUCCESS; } else { FSATA_DEBUG("should read capacity 16?"); } return FSATA_SUCCESS; } /** * @name: FSataAhciReadInfo * @msg: get sata information * @param {FSataCtrl} *instance_p, pointer to the FSataCtrl instance. * @param {u8} port, port number * @return {FError} return FSATA_SUCCESS if read successful, return others if read failed */ FError FSataAhciReadInfo(FSataCtrl *instance_p, u8 port) { FASSERT(instance_p != NULL); FASSERT(instance_p->is_ready == FT_COMPONENT_IS_READY); uintptr base_addr = instance_p->config.base_addr; FError ret = FSATA_SUCCESS; u16 *idbuf; unsigned long capacity, blksz; unsigned char info_data[50]; memset(info_data, 0, sizeof(info_data)); ret = FSataAhciInquiry(instance_p, port); if (ret != FSATA_SUCCESS) { FSATA_ERROR("FSataAhciInquiry!"); return FSATA_ERR_OPERATION; } /* Parse SATA Information */ idbuf = instance_p->ataid[port]; FSataIdStrCopy((u16 *)&info_data[16], &idbuf[FSATA_ID_PROD], 16); FSataIdStrCopy((u16 *)&info_data[32], &idbuf[FSATA_ID_FW_REV], 4); /* is ata device */ if (!((__swab16(idbuf[0]) & FSATA_ID_ATA_DEVICE))) { instance_p->port[port].dev_info.type = FSATA_DEV_TYPE_HARDDISK; memcpy(&info_data[8], "ATA ", 8); /* copy 8 bytes */ } else { instance_p->port[port].dev_info.type = FSATA_DEV_TYPE_UNKNOWN; } /* get info for this device */ FSataIdentityCopy((unsigned char *)instance_p->port[port].dev_info.vendor, &info_data[8], 8); FSataIdentityCopy((unsigned char *)instance_p->port[port].dev_info.product, &info_data[16], 16); FSataIdentityCopy((unsigned char *)instance_p->port[port].dev_info.revision, &info_data[32], 4); /* get sata capacity by parse ataid */ ret = FSataAhciReadCapacity(instance_p, port, &capacity, &blksz); if (ret != FSATA_SUCCESS) { FSATA_ERROR("FSataAhciReadCapacity error!"); return FSATA_ERR_OPERATION; } instance_p->port[port].dev_info.lba = capacity; instance_p->port[port].dev_info.blksz = blksz; instance_p->port[port].dev_info.if_type = FSATA_IF_TYPE_SCSI; FSataInfoPrint(&(instance_p->port[port].dev_info)); return ret; } /** * @name: FSataAhciReset * @msg: reset ahci / hba(host bus adapter) * @param {FSataCtrl} *instance_p, pointer to the FSataCtrl instance * @return {FError} return FSATA_SUCCESS if successful, return others if failed */ static FError FSataAhciReset(FSataCtrl *instance_p) { FASSERT(instance_p != NULL); FASSERT(instance_p->is_ready == FT_COMPONENT_IS_READY); int i = WAIT_MS_RESET; uintptr base_addr = instance_p->config.base_addr; u32 reg_val = 0; /* read host control register and reset */ reg_val = FSATA_READ_REG32(base_addr, FSATA_HOST_CTL); if ((reg_val & FSATA_HOST_RESET) == 0) { FSATA_SETBIT(base_addr, FSATA_HOST_CTL, FSATA_HOST_RESET); } /* reset must complete within 1 millisecond, or the hardware should be considered fried.*/ do { fsleep_microsec(1000); reg_val = FSATA_READ_REG32(base_addr, FSATA_HOST_CTL); i--; } while ((i > 0) && (reg_val & FSATA_HOST_RESET)); if (i == 0) { FSATA_ERROR("controller reset failed (0x%x)", reg_val); return FSATA_ERR_TIMEOUT; } return FSATA_SUCCESS; } /** * @name: FSataAhciInit * @msg: init ahci / hba(host bus adapter) * @param {FSataCtrl} *instance_p, pointer to the FSataCtrl instance * @return {FError} return FSATA_SUCCESS if successful, return others if failed */ FError FSataAhciInit(FSataCtrl *instance_p) { FASSERT(instance_p != NULL); FASSERT(instance_p->is_ready == FT_COMPONENT_IS_READY); uintptr base_addr = instance_p->config.base_addr; FError ret = FSATA_SUCCESS; u32 i; uintptr port_base_addr = 0; /* ahci port x base address */ u32 reg_val = 0; u32 port_num = 0; /* reset host control */ ret = FSataAhciReset(instance_p); if (ret != FSATA_SUCCESS) return ret; /* ahci enable */ FSATA_WRITE_REG32(base_addr, FSATA_HOST_CTL, FSATA_HOST_AHCI_EN); FSATA_READ_REG32(base_addr, FSATA_HOST_CTL); /* read cap.np, set the ports bit which are available for software to use. */ port_num = FSATA_READ_REG32(base_addr, FSATA_HOST_CAP) & FSATA_HOST_CAP_NP_MASK; FSATA_WRITE_REG32(base_addr, FSATA_HOST_PORTS_IMPL, FSATA_HOST_PORTS_IMPL_MASK(port_num)); /* set instance_p paramameters */ instance_p->n_ports = port_num + 1; instance_p->port_map = FSATA_READ_REG32(base_addr, FSATA_HOST_PORTS_IMPL); FSATA_DEBUG("port_map 0x%x n_ports %d", instance_p->port_map, instance_p->n_ports); for (i = 0; i < instance_p->n_ports; i++) { if (!(instance_p->port_map & BIT(i))) continue; /* set ports base address */ instance_p->port[i].port_base_addr = FSataAhciPortBase(base_addr, i); port_base_addr = instance_p->port[i].port_base_addr; /* make sure port is not active */ reg_val = FSATA_READ_REG32(port_base_addr, FSATA_PORT_CMD); if (reg_val & (FSATA_PORT_CMD_LIST_ON | FSATA_PORT_CMD_FIS_ON | FSATA_PORT_CMD_FIS_RX | FSATA_PORT_CMD_START)) { FSATA_DEBUG("Port %d is active, reg = %#x. Deactivating.", i, reg_val); reg_val &= ~(FSATA_PORT_CMD_LIST_ON | FSATA_PORT_CMD_FIS_ON | FSATA_PORT_CMD_FIS_RX | FSATA_PORT_CMD_START); FSATA_WRITE_REG32(port_base_addr, FSATA_PORT_CMD, reg_val); /* spec says 500 msecs for each bit, so this is slightly incorrect.*/ fsleep_millisec(500); } /* Add the spinup command to whatever mode bits may * already be on in the command register, set not support staggered spin-up */ reg_val = FSATA_READ_REG32(port_base_addr, FSATA_PORT_CMD); reg_val |= FSATA_PORT_CMD_SPIN_UP; FSATA_WRITE_REG32(port_base_addr, FSATA_PORT_CMD, reg_val); /* check sata port is linked */ ret = FSataAhciLinkUp(instance_p, i); if (ret) { FSATA_DEBUG("sata host %d, port %d link timeout", instance_p->config.instance_id, i); continue; } else { FSATA_DEBUG("sata host %d , port %d link ok.", instance_p->config.instance_id, i) ; } /* Clear error status */ reg_val = FSATA_READ_REG32(port_base_addr, FSATA_PORT_SCR_ERR); if (reg_val) FSATA_WRITE_REG32(port_base_addr, FSATA_PORT_SCR_ERR, reg_val); /* Device presence detected but Phy communication not established, retry once more */ reg_val = FSATA_READ_REG32(port_base_addr, FSATA_PORT_SCR_STAT) & FSATA_PORT_SCR_STAT_DET_MASK; if (reg_val == FSATA_PORT_SCR_STAT_DET_COMINIT) { FSATA_INFO("sata link %d down, retrying...", i); i--; continue; } /* Clear error status */ reg_val = FSATA_READ_REG32(port_base_addr, FSATA_PORT_SCR_ERR); if (reg_val) FSATA_WRITE_REG32(port_base_addr, FSATA_PORT_SCR_ERR, reg_val); /* clear port irq status */ reg_val = FSATA_READ_REG32(port_base_addr, FSATA_PORT_IRQ_STAT); if (reg_val) FSATA_WRITE_REG32(port_base_addr, FSATA_PORT_IRQ_STAT, reg_val); /* clear host corresponding port interrupt status register */ FSATA_WRITE_REG32(base_addr, FSATA_HOST_IRQ_STAT, BIT(i)); /* register linkup ports */ reg_val = FSATA_READ_REG32(port_base_addr, FSATA_PORT_SCR_STAT); if ((reg_val & FSATA_PORT_SCR_STAT_DET_MASK) == FSATA_PORT_SCR_STAT_DET_PHYRDY) instance_p->link_port_map |= BIT(i); } /* host interrupt enable */ reg_val = FSATA_READ_REG32(base_addr, FSATA_HOST_CTL); FSATA_WRITE_REG32(base_addr, FSATA_HOST_CTL, reg_val | FSATA_HOST_IRQ_EN); return FSATA_SUCCESS; } /** * @name: FSataAhciPortStart * @msg: init ahci port, allocate Port Memory Usage * @param {FSataCtrl} *instance_p, pointer to the FSataCtrl instance * @param {u8} port, port number * @param {uintptr} mem, Memory start address allocated to port * @return {FError} return FSATA_SUCCESS if successful, return others if failed */ FError FSataAhciPortStart(FSataCtrl *instance_p, u8 port, uintptr mem) { FASSERT(instance_p != NULL); FASSERT(instance_p->is_ready == FT_COMPONENT_IS_READY); FASSERT(mem); uintptr base_addr = instance_p->config.base_addr; FError ret = FSATA_SUCCESS; FSataAhciPorts *port_info = &(instance_p->port[port]); uintptr port_base_addr = port_info->port_base_addr; u32 reg_val = FSATA_READ_REG32(port_base_addr, FSATA_PORT_SCR_STAT); if ((reg_val & FSATA_PORT_SCR_STAT_DET_MASK) != FSATA_PORT_SCR_STAT_DET_PHYRDY) { FSATA_ERROR("No Link on host %d port %d!", instance_p->config.instance_id, port); return FSATA_ERR_OPERATION; } memset((void *)mem, 0, FSATA_AHCI_PORT_PRIV_DMA_SZ); /* First item in chunk of DMA memory: 32 command lists, 32 bytes each in size */ port_info->cmd_list = (FSataAhciCommandList *)(mem); mem += FSATA_AHCI_CMD_LIST_HEADER_SIZE * FSATA_AHCI_CMD_LIST_HEADER_NUM; /* Second item: Received-FIS area */ port_info->rx_fis = (FSataAhciRecvFis *)(mem); mem += FSATA_AHCI_RX_FIS_SZ; /* Third item: data area for storing a single command and its scatter-gather table */ port_info->cmd_tbl_base_addr = (uintptr)mem; mem += FSATA_AHCI_CMD_TABLE_HEADER_SIZE; /* command table prdt */ port_info->cmd_tbl_prdt = (FSataAhciCommandTablePrdt *)mem; /* set ahci port registers */ FSATA_WRITE_REG32(port_base_addr, FSATA_PORT_LST_ADDR, (uintptr)port_info->cmd_list & FSATA_PORT_CMD_LIST_ADDR_MASK); FSATA_WRITE_REG32(port_base_addr, FSATA_PORT_LST_ADDR_HI, 0); FSATA_WRITE_REG32(port_base_addr, FSATA_PORT_FIS_ADDR, (uintptr)port_info->rx_fis & FSATA_PORT_CMD_FIS_ADDR_MASK); FSATA_WRITE_REG32(port_base_addr, FSATA_PORT_FIS_ADDR_HI, 0); FSATA_WRITE_REG32(port_base_addr, FSATA_PORT_CMD, FSATA_PORT_CMD_ICC_ACTIVE | FSATA_PORT_CMD_FIS_RX | FSATA_PORT_CMD_POWER_ON | FSATA_PORT_CMD_SPIN_UP | FSATA_PORT_CMD_START); /* * Make sure interface is not busy based on error and status * information from task file data register before proceeding */ if (FSataWaitCmdCompleted(port_base_addr + FSATA_PORT_TFDATA, WAIT_MS_TFD, FSATA_BUSY)) { FSATA_DEBUG("timeout exit!"); return FSATA_ERR_TIMEOUT; } instance_p->private_data |= BIT(port); return ret; } /** * @name: FSataAhciFillCmdTablePrdt * @msg: allocate ahci command table prdt information * @param {FSataCtrl} *instance_p, pointer to the FSataCtrl instance * @param {u8} port, port number * @param {unsigned char} *buffer, data buffer address * @param {int} buf_len, data length * @return {int} return item_count if successful, return -1 if failed */ static int FSataAhciFillCmdTablePrdt(FSataCtrl *instance_p, u8 port, unsigned char *buf, int buf_len) { FASSERT(instance_p != NULL); FASSERT(instance_p->is_ready == FT_COMPONENT_IS_READY); FSataAhciPorts *port_info = &(instance_p->port[port]); FSataAhciCommandTablePrdt *command_table_prdt = port_info->cmd_tbl_prdt; int item_count; int i; item_count = ((buf_len - 1) / MAX_DATA_BYTE_COUNT) + 1; if (item_count > FSATA_AHCI_PRTD_ITEM_NUM) { FSATA_ERROR("Too much command table prdt items %d!", item_count); return -1; } for (i = 0; i < item_count; i++) { command_table_prdt->addr_low = ((unsigned long) buf + i * MAX_DATA_BYTE_COUNT); command_table_prdt->addr_high = 0; command_table_prdt->data_byte = (0x3fffff & (buf_len < MAX_DATA_BYTE_COUNT ? (buf_len - 1) : (MAX_DATA_BYTE_COUNT - 1))); command_table_prdt++; buf_len -= MAX_DATA_BYTE_COUNT; } return item_count; } /** * @name: FSataAhciFillCmdList * @msg: allocate ahci command list information * @param {FSataAhciPorts} *port_info is a pointer to the FSataAhciPorts instance * @param {u32} description_info, prdtl+flag+cfl * @return {void} */ static void FSataAhciFillCmdList(FSataAhciPorts *port_info, u32 description_info) { FASSERT(port_info != NULL); port_info->cmd_list->description_info = description_info; port_info->cmd_list->status = 0; port_info->cmd_list->tbl_addr = ((u32)port_info->cmd_tbl_base_addr & FSATA_PORT_CMD_TABLE_ADDR_MASK); #ifdef __aarch64__ port_info->cmd_list->tbl_addr_hi = (u32)(((port_info->cmd_tbl_base_addr) >> 16) >> 16); #endif } /** * @name: FSataAhciDataIO * @msg: transfer ahci command fis and data buffer * @param {FSataCtrl} *instance_p, pointer to the FSataCtrl instance * @param {u8} port number * @param {u8} *fis, command fis buffer * @param {int} fis_len, command fis length * @param {u8} *buf, data read/write buffer * @param {int} buf_len, data length * @param {u8} is_write, 0-read, 1-write * @return {FError} return FSATA_SUCCESS if successful, return others if failed */ static FError FSataAhciDataIO(FSataCtrl *instance_p, u8 port, u8 *fis, int fis_len, u8 *buf, int buf_len, boolean is_ncq, boolean is_write) { FASSERT(instance_p != NULL); FASSERT(instance_p->is_ready == FT_COMPONENT_IS_READY); FASSERT(fis != NULL); FSataAhciPorts *port_info = &(instance_p->port[port]); uintptr base_addr = instance_p->config.base_addr; uintptr port_base_addr = instance_p->port[port].port_base_addr; if (port >= instance_p->n_ports) { FSATA_DEBUG("Invalid port number %d", port); return FSATA_ERR_INVAILD_PARAMETER; } u32 reg_val = FSATA_READ_REG32(port_base_addr, FSATA_PORT_SCR_STAT); if ((reg_val & FSATA_PORT_SCR_STAT_DET_MASK) != FSATA_PORT_SCR_STAT_DET_PHYRDY) { FSATA_ERROR("No Link on host %d port %d!", instance_p->config.instance_id, port); return FSATA_ERR_OPERATION; } /* copy fis command to command table CFIS */ memcpy((unsigned char *)port_info->cmd_tbl_base_addr, fis, fis_len); /* copy data buffer address to command table prdt item */ int prdt_length = FSataAhciFillCmdTablePrdt(instance_p, port, buf, buf_len); if (prdt_length == -1) { FSATA_ERROR("FSataAhciFillCmdTablePrdt failed, buf_len = %d\n", buf_len); return FSATA_ERR_INVAILD_PARAMETER; } /* command list DW0: PRDTL(buf len) + W/R + CFL(fis len, 4 Byte(Dword) aligned) */ u32 description_info = (prdt_length << 16) | (is_write << 6) | (fis_len >> 2); /* copy data to command list struct */ FSataAhciFillCmdList(port_info, description_info); FCacheDCacheFlushRange((unsigned long)port_info->cmd_list, FSATA_AHCI_PORT_PRIV_DMA_SZ); FCacheDCacheFlushRange((unsigned long)buf, (unsigned long)buf_len); /* set tag bit in SACT register before write CI register when use native cmd */ if (is_ncq == TRUE) FSATA_WRITE_REG32(port_base_addr, FSATA_PORT_SCR_ACT, FSATA_PORT_SCR_ACT_ENABLE); /* send cmd */ FSATA_WRITE_REG32(port_base_addr, FSATA_PORT_CMD_ISSUE, FSATA_PORT_CMD_ISSUE_ENABLE); if (FSataWaitCmdCompleted(port_base_addr + FSATA_PORT_CMD_ISSUE, WAIT_MS_DATAIO, FSATA_PORT_CMD_ISSUE_ENABLE)) { FSATA_ERROR("timeout exit!"); return FSATA_ERR_TIMEOUT; } return FSATA_SUCCESS; } /** * @name: FSataReadWrite * @msg: read or write sata block data, choose if use ncq * @param {FSataCtrl} *instance_p, pointer to the FSataCtrl instance * @param {u8} port, port number * @param {u32} start, start block * @param {u32} blk_cnt, block count * @param {u8} *buffer, data buffer * @param {boolean} is_ncq, FALSE-not support ncq, TRUE-support ncq * @param {boolean} is_write, read or write, FALSE-read, TRUE-write * @return {FError} return FSATA_SUCCESS if successful, return others if failed */ FError FSataReadWrite(FSataCtrl *instance_p, u8 port, u32 start, u16 blk_cnt, u8 *buffer, boolean is_ncq, boolean is_write) { FASSERT(instance_p != NULL); FASSERT(instance_p->is_ready == FT_COMPONENT_IS_READY); FASSERT(blk_cnt); uintptr base_addr = instance_p->config.base_addr; FError ret = FSATA_SUCCESS; u16 now_blocks; /* number of blocks per iteration */ u32 transfer_size; /* number of bytes per iteration */ u8 fis[20]; /* Preset the FIS */ memset(fis, 0, sizeof(fis)); fis[0] = FSATA_FIS_REG_HOST_TO_DEVICE;/* fis type */ fis[1] = FSATA_FIS_REG_HOST_TO_DEVICE_C; /* C and PM Port */ if (is_ncq == FALSE) fis[2] = is_write ? FSATA_CMD_WRITE_EXT : FSATA_CMD_READ_EXT; /* Command */ else fis[2] = is_write ? FSATA_CMD_FPDMA_WRITE : FSATA_CMD_FPDMA_READ; /* Command */ while (blk_cnt) { now_blocks = min((u16)MAX_SATA_BLOCKS_READ_WRITE, blk_cnt); transfer_size = FSATA_SECT_SIZE * now_blocks; if (is_ncq == FALSE) { /* FEATURE Reserved */ fis[3] = 0; /* features 7:0 */ fis[11] = 0; /* features 15:8 */ /* LBA of first logical sector to be transferred */ fis[4] = ((start >> 0) & 0xff); /* lba 7:0 */ fis[5] = ((start >> 8) & 0xff); /* lba 15:8 */ fis[6] = ((start >> 16) & 0xff); /* lba 23:16 */ fis[8] = ((start >> 24) & 0xff); /* lba 31:24 */ /* device reg, bit 6 Shall be set to one in read command */ fis[7] = FSATA_CMD_EXT_DEVICE; /* The number of logical sectors to be transferred. */ fis[12] = (now_blocks >> 0) & 0xff;/* count 7:0 */ fis[13] = (now_blocks >> 8) & 0xff;/* count 15:8 */ } else { /* FEATURE：The number of logical sectors to be transferred. */ fis[3] = (now_blocks >> 0) & 0xff; /* features 7:0 */ fis[11] = (now_blocks >> 8) & 0xff; /* features 15:8 */ /* LBA of first logical sector to be transferred */ fis[4] = ((start >> 0) & 0xff); /* lba 7:0 */ fis[5] = ((start >> 8) & 0xff); /* lba 15:8 */ fis[6] = ((start >> 16) & 0xff); /* lba 23:16 */ fis[8] = ((start >> 24) & 0xff); /* lba 31:24 */ /* device reg, bit 6 Shall be set to one */ fis[7] = FSATA_CMD_EXT_DEVICE; /* count */ fis[12] = 0;/* count 7:0, NCQ TAG field */ fis[13] = 0;/* count 15:8, Normal priority */ } ret = FSataAhciDataIO(instance_p, port, fis, sizeof(fis), buffer, transfer_size, is_ncq, is_write); if (ret) { FSATA_ERROR("scsi_ahci: SCSI command failure. ret = %#x", ret); return FSATA_ERR_OPERATION; } buffer += transfer_size; blk_cnt -= now_blocks; start += now_blocks; } return ret; } /** * @name: FSataCfgInitialize * @msg: Initialize Sata ctrl * @param {FSataCtrl} *instance_p, pointer to the FSataCtrl instance. * @param {FSataConfig} *input_config_p, Default configuration parameters of FSata * @return {FError} return FSATA_SUCCESS if successful, return others if failed */ FError FSataCfgInitialize(FSataCtrl *instance_p, const FSataConfig *input_config_p) { FASSERT(instance_p); /*Set default values and configuration data */ FSataCfgDeInitialize(instance_p); instance_p->config = *input_config_p; instance_p->is_ready = FT_COMPONENT_IS_READY; return FSATA_SUCCESS; } /** * @name: FSataCfgDeInitialize * @msg: DeInitialization function for the device instance * @param {FSataCtrl} *instance_p, pointer to the FSataCtrl instance. * @return {*} */ void FSataCfgDeInitialize(FSataCtrl *pctrl) { FASSERT(pctrl); pctrl->is_ready = 0; memset(pctrl, 0, sizeof(*pctrl)); return; }