/******************************************************************************
 * Copyright (C) 2020, Huada Semiconductor Co., Ltd. All rights reserved.
 *
 * This software component is licensed by HDSC under BSD 3-Clause license
 * (the "License"); You may not use this file except in compliance with the
 * License. You may obtain a copy of the License at:
 *                    opensource.org/licenses/BSD-3-Clause
 */
/******************************************************************************/
/** \file hc32f460_sram.h
 **
 ** A detailed description is available at
 ** @link SramGroup Internal SRAM description @endlink
 **
 **   - 2018-10-17 CDT First version for Device Driver Library of SRAM.
 **
 ******************************************************************************/

#ifndef __HC32F460_SRAM_H__
#define __HC32F460_SRAM_H__

/*******************************************************************************
 * Include files
 ******************************************************************************/
#include "hc32_common.h"
#include "ddl_config.h"

#if (DDL_SRAM_ENABLE == DDL_ON)

/* C binding of definitions if building with C++ compiler */
#ifdef __cplusplus
extern "C"
{
#endif

/**
 *******************************************************************************
 *  \defgroup SramGroup Internal SRAM
 **
 ******************************************************************************/
//@{

/*******************************************************************************
 * Global type definitions ('typedef')
 ******************************************************************************/
///< SRAM wait cycle register, parity/ECC check register protect code definition
#define SRAM_PROTECT_CODE   (0x0000003Bu)

/*******************************************************************************
                Start addr.     End addr.       Size    Function
  SRAM1         0x20000000      0x2000FFFF      64KB    Even Parity Check
  SRAM2         0x20010000      0x2001FFFF      64KB    Even Parity Check
  SRAM3         0x20020000      0x20026FFF      28KB    ECC Check
  SRAM_Ret      0x200F0000      0x200F0FFF       4KB    Even Parity Check
  SRAM_HS       0x1FFF8000      0x1FFFFFFF      32KB    Even Parity Check
 ******************************************************************************/
///< SRAM1 base address definition
#define SRAM1_BASE_ADDR     (*((volatile unsigned int*)(0x20000000UL)))

///< SRAM2 base address definition
#define SRAM2_BASE_ADDR     (*((volatile unsigned int*)(0x20010000UL)))

///< SRAM3 base address definition
#define SRAM3_BASE_ADDR     (*((volatile unsigned int*)(0x20020000UL)))

///< Retention SRAM base address definition
#define SRAMRET_BASE_ADDR   (*((volatile unsigned int*)(0x200F0000UL)))

///< High speed SRAM base address definition
#define SRAMHS_BASE_ADDR    (*((volatile unsigned int*)(0x1FFF8000UL)))


typedef enum en_sram_index
{
    Sram12Idx   =   1u << 0,
    Sram3Idx    =   1u << 1,
    SramHsIdx   =   1u << 2,
    SramRetIdx  =   1u << 3,
}en_sram_index_t;
/**
 *******************************************************************************
 ** \brief Enumeration to the write/read cycles of SRAM
 **
 ** \note
 ******************************************************************************/
typedef enum en_sram_rw_cycle
{
    SramCycle1    = 0u,
    SramCycle2    = 1u,
    SramCycle3    = 2u,
    SramCycle4    = 3u,
    SramCycle5    = 4u,
    SramCycle6    = 5u,
    SramCycle7    = 6u,
    SramCycle8    = 7u,
}en_sram_rw_cycle_t;

/**
 *******************************************************************************
 ** \brief Enumeration to ECC check mode
 **
 ** \note
 ******************************************************************************/
typedef enum en_ecc_mode
{
    EccMode0    = 0u,       ///< disable ECC check function
    EccMode1    = 1u,       ///< no 1 bit ECC flag, interrupt/reset if 1 bit-ECC is detected
                            ///< generate 2 bit ECC flag, interrupt/reset if 2 bit-ECC is detected
    EccMode2    = 2u,       ///< generate 1 bit ECC flag, but no interrupt/reset if 1 bit-ECC is detected
                            ///< generate 2 bit ECC flag, interrupt/reset if 2 bit-ECC is detected
    EccMode3    = 3u,       ///< generate 1 bit ECC flag, interrupt/reset if 1 bit-ECC is detected
                            ///< generate 2 bit ECC flag, interrupt/reset if 2 bit-ECC is detected
}en_ecc_mode_t;

/**
 *******************************************************************************
 ** \brief Enumeration to operation after ECC/Parity error
 **
 ** \note
 ******************************************************************************/
typedef enum en_ecc_py_err_op
{
    SramNmi     = 0u,           ///< Generate NMI after ECC/Parity error detected
    SramReset   = 1u,           ///< Generate Reset after ECC/Parity error detected
}en_ecc_py_err_op_t;

/**
 *******************************************************************************
 ** \brief Enumeration to the ECC/Parity error status of each SRAM
 **
 ** \note
 ******************************************************************************/
typedef enum en_sram_err_status
{
    Sram3EccErr1        = 1u << 0,      ///< SRAM3 1 bit ECC error
    Sram3EccErr2        = 1u << 1,      ///< SRAM3 2 bit ECC error
    Sram12ParityErr     = 1u << 2,      ///< SRAM1/2 parity error
    SramHSParityErr     = 1u << 3,      ///< High speed SRAM parity error
    SramRetParityErr    = 1u << 4,      ///< Retention SRAM parity error
}en_sram_err_status_t;

/**
 *******************************************************************************
 ** \brief SRAM configuration
 **
 ** \note The SRAM configuration structure
 ******************************************************************************/
typedef struct stc_sram_config
{
    uint8_t             u8SramIdx;      ///< SRAM index, ref @ en_sram_index_t for details
    en_sram_rw_cycle_t  enSramRC;       ///< SRAM read wait cycle setting
    en_sram_rw_cycle_t  enSramWC;       ///< SRAM write wait cycle setting
    en_ecc_mode_t       enSramEccMode;  ///< SRAM ECC mode setting
    en_ecc_py_err_op_t  enSramEccOp;    ///< SRAM3 ECC error handling setting
    en_ecc_py_err_op_t  enSramPyOp;     ///< SRAM1/2/HS/Ret Parity error handling setting

}stc_sram_config_t;

/*******************************************************************************
 * Global pre-processor symbols/macros ('#define')
 ******************************************************************************/

/*******************************************************************************
 * Global variable definitions ('extern')
 ******************************************************************************/

/*******************************************************************************
 * Global function prototypes (definition in C source)
 ******************************************************************************/
extern en_result_t SRAM_Init(const stc_sram_config_t *pstcSramConfig);
extern en_result_t SRAM_DeInit(void);
extern en_result_t SRAM_WT_Disable(void);
extern en_result_t SRAM_WT_Enable(void);
extern en_result_t SRAM_CK_Disable(void);
extern en_result_t SRAM_CK_Enable(void);
extern en_flag_status_t SRAM_GetStatus(en_sram_err_status_t enSramErrStatus);
extern en_result_t SRAM_ClrStatus(en_sram_err_status_t enSramErrStatus);

//@} // SramGroup

#ifdef __cplusplus
}
#endif

#endif /* DDL_SRAM_ENABLE */

#endif /* __HC32F460_SRAM_H__ */
/*******************************************************************************
 * EOF (not truncated)
 ******************************************************************************/