/**************************************************************************//** * @file nu_usci_uart.h * @version V1.00 * @brief M031 series USCI UART (UUART) driver header file * * SPDX-License-Identifier: Apache-2.0 * @copyright (C) 2018 Nuvoton Technology Corp. All rights reserved. *****************************************************************************/ #ifndef __NU_USCI_UART_H__ #define __NU_USCI_UART_H__ #ifdef __cplusplus extern "C" { #endif /** @addtogroup Standard_Driver Standard Driver @{ */ /** @addtogroup USCI_UART_Driver USCI_UART Driver @{ */ /** @addtogroup USCI_UART_EXPORTED_CONSTANTS USCI_UART Exported Constants @{ */ /*---------------------------------------------------------------------------------------------------------*/ /* UUART_LINECTL constants definitions */ /*---------------------------------------------------------------------------------------------------------*/ #define UUART_WORD_LEN_6 (6ul << UUART_LINECTL_DWIDTH_Pos) /*!< UUART_LINECTL setting to set UART word length to 6 bits \hideinitializer */ #define UUART_WORD_LEN_7 (7ul << UUART_LINECTL_DWIDTH_Pos) /*!< UUART_LINECTL setting to set UART word length to 7 bits \hideinitializer */ #define UUART_WORD_LEN_8 (8ul << UUART_LINECTL_DWIDTH_Pos) /*!< UUART_LINECTL setting to set UART word length to 8 bits \hideinitializer */ #define UUART_WORD_LEN_9 (9ul << UUART_LINECTL_DWIDTH_Pos) /*!< UUART_LINECTL setting to set UART word length to 9 bits \hideinitializer */ /*---------------------------------------------------------------------------------------------------------*/ /* UUART_PROTCTL constants definitions */ /*---------------------------------------------------------------------------------------------------------*/ #define UUART_PARITY_NONE (0x0ul << UUART_PROTCTL_PARITYEN_Pos) /*!< UUART_PROTCTL setting to set UART as no parity \hideinitializer */ #define UUART_PARITY_ODD (0x1ul << UUART_PROTCTL_PARITYEN_Pos) /*!< UUART_PROTCTL setting to set UART as odd parity \hideinitializer */ #define UUART_PARITY_EVEN (0x3ul << UUART_PROTCTL_PARITYEN_Pos) /*!< UUART_PROTCTL setting to set UART as even parity \hideinitializer */ #define UUART_STOP_BIT_1 (0x0ul) /*!< UUART_PROTCTL setting for one stop bit \hideinitializer */ #define UUART_STOP_BIT_2 (0x1ul) /*!< UUART_PROTCTL setting for two stop bit \hideinitializer */ /*---------------------------------------------------------------------------------------------------------*/ /* USCI UART interrupt mask definitions */ /*---------------------------------------------------------------------------------------------------------*/ #define UUART_ABR_INT_MASK (0x002ul) /*!< Auto-baud rate interrupt mask \hideinitializer */ #define UUART_RLS_INT_MASK (0x004ul) /*!< Receive line status interrupt mask \hideinitializer */ #define UUART_BUF_RXOV_INT_MASK (0x008ul) /*!< Buffer RX overrun interrupt mask \hideinitializer */ #define UUART_TXST_INT_MASK (0x010ul) /*!< TX start interrupt mask \hideinitializer */ #define UUART_TXEND_INT_MASK (0x020ul) /*!< Tx end interrupt mask \hideinitializer */ #define UUART_RXST_INT_MASK (0x040ul) /*!< RX start interrupt mask \hideinitializer */ #define UUART_RXEND_INT_MASK (0x080ul) /*!< RX end interrupt mask \hideinitializer */ /*@}*/ /* end of group USCI_UART_EXPORTED_CONSTANTS */ /** @addtogroup USCI_UART_EXPORTED_FUNCTIONS USCI_UART Exported Functions @{ */ /** * @brief Write USCI_UART data * * @param[in] uuart The pointer of the specified USCI_UART module * @param[in] u8Data Data byte to transmit. * * @return None * * @details This macro write Data to Tx data register. * \hideinitializer */ #define UUART_WRITE(uuart, u8Data) ((uuart)->TXDAT = (u8Data)) /** * @brief Read USCI_UART data * * @param[in] uuart The pointer of the specified USCI_UART module * * @return The oldest data byte in RX buffer. * * @details This macro read Rx data register. * \hideinitializer */ #define UUART_READ(uuart) ((uuart)->RXDAT) /** * @brief Get Tx empty * * @param[in] uuart The pointer of the specified USCI_UART module * * @retval 0 Tx buffer is not empty * @retval >=1 Tx buffer is empty * * @details This macro get Transmitter buffer empty register value. * \hideinitializer */ #define UUART_GET_TX_EMPTY(uuart) ((uuart)->BUFSTS & UUART_BUFSTS_TXEMPTY_Msk) /** * @brief Get Rx empty * * @param[in] uuart The pointer of the specified USCI_UART module * * @retval 0 Rx buffer is not empty * @retval >=1 Rx buffer is empty * * @details This macro get Receiver buffer empty register value. * \hideinitializer */ #define UUART_GET_RX_EMPTY(uuart) ((uuart)->BUFSTS & UUART_BUFSTS_RXEMPTY_Msk) /** * @brief Check specified usci_uart port transmission is over. * * @param[in] uuart The pointer of the specified USCI_UART module * * @retval 0 Tx transmission is not over * @retval 1 Tx transmission is over * * @details This macro return Transmitter Empty Flag register bit value. \n * It indicates if specified usci_uart port transmission is over nor not. * \hideinitializer */ #define UUART_IS_TX_EMPTY(uuart) (((uuart)->BUFSTS & UUART_BUFSTS_TXEMPTY_Msk) >> UUART_BUFSTS_TXEMPTY_Pos) /** * @brief Check specified usci_uart port receiver is empty. * * @param[in] uuart The pointer of the specified USCI_UART module * * @retval 0 Rx receiver is not empty * @retval 1 Rx receiver is empty * * @details This macro return Receive Empty Flag register bit value. \n * It indicates if specified usci_uart port receiver is empty nor not. * \hideinitializer */ #define UUART_IS_RX_EMPTY(uuart) (((uuart)->BUFSTS & UUART_BUFSTS_RXEMPTY_Msk) >> UUART_BUFSTS_RXEMPTY_Pos) /** * @brief Wait specified usci_uart port transmission is over * * @param[in] uuart The pointer of the specified USCI_UART module * * @return None * * @details This macro wait specified usci_uart port transmission is over. * \hideinitializer */ #define UUART_WAIT_TX_EMPTY(uuart) while(!((((uuart)->BUFSTS) & UUART_BUFSTS_TXEMPTY_Msk) >> UUART_BUFSTS_TXEMPTY_Pos)) /** * @brief Check TX buffer is full or not * * @param[in] uuart The pointer of the specified USCI_UART module * * @retval 1 TX buffer is full * @retval 0 TX buffer is not full * * @details This macro check TX buffer is full or not. * \hideinitializer */ #define UUART_IS_TX_FULL(uuart) (((uuart)->BUFSTS & UUART_BUFSTS_TXFULL_Msk)>>UUART_BUFSTS_TXFULL_Pos) /** * @brief Check RX buffer is full or not * * @param[in] uuart The pointer of the specified USCI_UART module * * @retval 1 RX buffer is full * @retval 0 RX buffer is not full * * @details This macro check RX buffer is full or not. * \hideinitializer */ #define UUART_IS_RX_FULL(uuart) (((uuart)->BUFSTS & UUART_BUFSTS_RXFULL_Msk)>>UUART_BUFSTS_RXFULL_Pos) /** * @brief Get Tx full register value * * @param[in] uuart The pointer of the specified USCI_UART module * * @retval 0 Tx buffer is not full. * @retval >=1 Tx buffer is full. * * @details This macro get Tx full register value. * \hideinitializer */ #define UUART_GET_TX_FULL(uuart) ((uuart)->BUFSTS & UUART_BUFSTS_TXFULL_Msk) /** * @brief Get Rx full register value * * @param[in] uuart The pointer of the specified USCI_UART module * * @retval 0 Rx buffer is not full. * @retval >=1 Rx buffer is full. * * @details This macro get Rx full register value. * \hideinitializer */ #define UUART_GET_RX_FULL(uuart) ((uuart)->BUFSTS & UUART_BUFSTS_RXFULL_Msk) /** * @brief Enable specified USCI_UART protocol interrupt * * @param[in] uuart The pointer of the specified USCI_UART module * @param[in] u32IntSel Interrupt type select * - \ref UUART_PROTIEN_RLSIEN_Msk : Rx Line status interrupt * - \ref UUART_PROTIEN_ABRIEN_Msk : Auto-baud rate interrupt * * @return None * * @details This macro enable specified USCI_UART protocol interrupt. * \hideinitializer */ #define UUART_ENABLE_PROT_INT(uuart, u32IntSel) ((uuart)->PROTIEN |= (u32IntSel)) /** * @brief Disable specified USCI_UART protocol interrupt * * @param[in] uuart The pointer of the specified USCI_UART module * @param[in] u32IntSel Interrupt type select * - \ref UUART_PROTIEN_RLSIEN_Msk : Rx Line status interrupt * - \ref UUART_PROTIEN_ABRIEN_Msk : Auto-baud rate interrupt * * @return None * * @details This macro disable specified USCI_UART protocol interrupt. * \hideinitializer */ #define UUART_DISABLE_PROT_INT(uuart, u32IntSel) ((uuart)->PROTIEN &= ~(u32IntSel)) /** * @brief Enable specified USCI_UART buffer interrupt * * @param[in] uuart The pointer of the specified USCI_UART module * @param[in] u32IntSel Interrupt type select * - \ref UUART_BUFCTL_RXOVIEN_Msk : Receive buffer overrun error interrupt * * @return None * * @details This macro enable specified USCI_UART buffer interrupt. * \hideinitializer */ #define UUART_ENABLE_BUF_INT(uuart, u32IntSel) ((uuart)->BUFCTL |= (u32IntSel)) /** * @brief Disable specified USCI_UART buffer interrupt * * @param[in] uuart The pointer of the specified USCI_UART module * @param[in] u32IntSel Interrupt type select * - \ref UUART_BUFCTL_RXOVIEN_Msk : Receive buffer overrun error interrupt * * @return None * * @details This macro disable specified USCI_UART buffer interrupt. * \hideinitializer */ #define UUART_DISABLE_BUF_INT(uuart, u32IntSel) ((uuart)->BUFCTL &= ~ (u32IntSel)) /** * @brief Enable specified USCI_UART transfer interrupt * * @param[in] uuart The pointer of the specified USCI_UART module * @param[in] u32IntSel Interrupt type select * - \ref UUART_INTEN_RXENDIEN_Msk : Receive end interrupt * - \ref UUART_INTEN_RXSTIEN_Msk : Receive start interrupt * - \ref UUART_INTEN_TXENDIEN_Msk : Transmit end interrupt * - \ref UUART_INTEN_TXSTIEN_Msk : Transmit start interrupt * * @return None * * @details This macro enable specified USCI_UART transfer interrupt. * \hideinitializer */ #define UUART_ENABLE_TRANS_INT(uuart, u32IntSel) ((uuart)->INTEN |= (u32IntSel)) /** * @brief Disable specified USCI_UART transfer interrupt * * @param[in] uuart The pointer of the specified USCI_UART module * @param[in] u32IntSel Interrupt type select * - \ref UUART_INTEN_RXENDIEN_Msk : Receive end interrupt * - \ref UUART_INTEN_RXSTIEN_Msk : Receive start interrupt * - \ref UUART_INTEN_TXENDIEN_Msk : Transmit end interrupt * - \ref UUART_INTEN_TXSTIEN_Msk : Transmit start interrupt * * @return None * * @details This macro disable specified USCI_UART transfer interrupt. * \hideinitializer */ #define UUART_DISABLE_TRANS_INT(uuart, u32IntSel) ((uuart)->INTEN &= ~(u32IntSel)) /** * @brief Get protocol interrupt flag/status * * @param[in] uuart The pointer of the specified USCI_UART module * * @return The interrupt flag/status of protocol status register. * * @details This macro get protocol status register value. * \hideinitializer */ #define UUART_GET_PROT_STATUS(uuart) ((uuart)->PROTSTS) /** * @brief Clear specified protocol interrupt flag * * @param[in] uuart The pointer of the specified USCI_UART module * @param[in] u32IntTypeFlag Interrupt Type Flag, should be * - \ref UUART_PROTSTS_ABERRSTS_Msk : Auto-baud Rate Error Interrupt Indicator * - \ref UUART_PROTSTS_ABRDETIF_Msk : Auto-baud Rate Detected Interrupt Flag * - \ref UUART_PROTSTS_BREAK_Msk : Break Flag * - \ref UUART_PROTSTS_FRMERR_Msk : Framing Error Flag * - \ref UUART_PROTSTS_PARITYERR_Msk : Parity Error Flag * - \ref UUART_PROTSTS_RXENDIF_Msk : Receive End Interrupt Flag * - \ref UUART_PROTSTS_RXSTIF_Msk : Receive Start Interrupt Flag * - \ref UUART_PROTSTS_TXENDIF_Msk : Transmit End Interrupt Flag * - \ref UUART_PROTSTS_TXSTIF_Msk : Transmit Start Interrupt Flag * * @return None * * @details This macro clear specified protocol interrupt flag. * \hideinitializer */ #define UUART_CLR_PROT_INT_FLAG(uuart,u32IntTypeFlag) ((uuart)->PROTSTS = (u32IntTypeFlag)) /** * @brief Get transmit/receive buffer interrupt flag/status * * @param[in] uuart The pointer of the specified USCI_UART module * * @return The interrupt flag/status of buffer status register. * * @details This macro get buffer status register value. * \hideinitializer */ #define UUART_GET_BUF_STATUS(uuart) ((uuart)->BUFSTS) /** * @brief Clear specified buffer interrupt flag * * @param[in] uuart The pointer of the specified USCI_UART module * @param[in] u32IntTypeFlag Interrupt Type Flag, should be * - \ref UUART_BUFSTS_RXOVIF_Msk : Receive Buffer Over-run Error Interrupt Indicator * * @return None * * @details This macro clear specified buffer interrupt flag. * \hideinitializer */ #define UUART_CLR_BUF_INT_FLAG(uuart,u32IntTypeFlag) ((uuart)->BUFSTS = (u32IntTypeFlag)) /** * @brief Get wakeup flag * * @param[in] uuart The pointer of the specified USCI_UART module * * @retval 0 Chip did not wake up from power-down mode. * @retval 1 Chip waked up from power-down mode. * * @details This macro get wakeup flag. * \hideinitializer */ #define UUART_GET_WAKEUP_FLAG(uuart) ((uuart)->WKSTS & UUART_WKSTS_WKF_Msk ? 1: 0 ) /** * @brief Clear wakeup flag * * @param[in] uuart The pointer of the specified USCI_UART module * * @return None * * @details This macro clear wakeup flag. * \hideinitializer */ #define UUART_CLR_WAKEUP_FLAG(uuart) ((uuart)->WKSTS = UUART_WKSTS_WKF_Msk) /** * @brief Enable specified USCI_UART PDMA function * * @param[in] uuart The pointer of the specified USCI_UART module * @param[in] u32FuncSel Combination of following functions * - \ref UUART_PDMACTL_TXPDMAEN_Msk * - \ref UUART_PDMACTL_RXPDMAEN_Msk * - \ref UUART_PDMACTL_PDMAEN_Msk * * @return None * * \hideinitializer */ #define UUART_PDMA_ENABLE(uuart, u32FuncSel) ((uuart)->PDMACTL |= (u32FuncSel)) /** * @brief Disable specified USCI_UART PDMA function * * @param[in] uuart The pointer of the specified USCI_UART module * @param[in] u32FuncSel Combination of following functions * - \ref UUART_PDMACTL_TXPDMAEN_Msk * - \ref UUART_PDMACTL_RXPDMAEN_Msk * - \ref UUART_PDMACTL_PDMAEN_Msk * * @return None * * \hideinitializer */ #define UUART_PDMA_DISABLE(uuart, u32FuncSel) ((uuart)->PDMACTL &= ~(u32FuncSel)) /** * @brief Trigger RX PDMA function. * * @param[in] uuart The pointer of the specified USCI_UART module. * * @return None. * * @details Set RXPDMAEN bit of UUART_PDMACTL register to enable RX PDMA transfer function. * \hideinitializer */ #define UUART_TRIGGER_RX_PDMA(uuart) ((uuart)->PDMACTL |= UUART_PDMACTL_RXPDMAEN_Msk|UUART_PDMACTL_PDMAEN_Msk) /** * @brief Trigger TX PDMA function. * * @param[in] uuart The pointer of the specified USCI_UART module. * * @return None. * * @details Set TXPDMAEN bit of UUART_PDMACTL register to enable TX PDMA transfer function. * \hideinitializer */ #define UUART_TRIGGER_TX_PDMA(uuart) ((uuart)->PDMACTL |= UUART_PDMACTL_TXPDMAEN_Msk|UUART_PDMACTL_PDMAEN_Msk) /** * @brief Disable RX PDMA transfer. * * @param[in] uuart The pointer of the specified USCI_UART module. * * @return None. * * @details Clear RXPDMAEN bit of UUART_PDMACTL register to disable RX PDMA transfer function. * \hideinitializer */ #define UUART_DISABLE_RX_PDMA(uuart) ( (uuart)->PDMACTL &= ~UUART_PDMACTL_RXPDMAEN_Msk ) /** * @brief Disable TX PDMA transfer. * * @param[in] uuart The pointer of the specified USCI_UART module. * * @return None. * * @details Clear TXPDMAEN bit of UUART_PDMACTL register to disable TX PDMA transfer function. * \hideinitializer */ #define UUART_DISABLE_TX_PDMA(uuart) ( (uuart)->PDMACTL &= ~UUART_PDMACTL_TXPDMAEN_Msk ) void UUART_ClearIntFlag(UUART_T* uuart, uint32_t u32Mask); uint32_t UUART_GetIntFlag(UUART_T* uuart, uint32_t u32Mask); void UUART_Close(UUART_T* uuart); void UUART_DisableInt(UUART_T* uuart, uint32_t u32Mask); void UUART_EnableInt(UUART_T* uuart, uint32_t u32Mask); uint32_t UUART_Open(UUART_T* uuart, uint32_t u32baudrate); uint32_t UUART_Read(UUART_T* uuart, uint8_t pu8RxBuf[], uint32_t u32ReadBytes); uint32_t UUART_SetLine_Config(UUART_T* uuart, uint32_t u32baudrate, uint32_t u32data_width, uint32_t u32parity, uint32_t u32stop_bits); uint32_t UUART_Write(UUART_T* uuart, uint8_t pu8TxBuf[], uint32_t u32WriteBytes); void UUART_EnableWakeup(UUART_T* uuart, uint32_t u32WakeupMode); void UUART_DisableWakeup(UUART_T* uuart); void UUART_EnableFlowCtrl(UUART_T* uuart); void UUART_DisableFlowCtrl(UUART_T* uuart); /*@}*/ /* end of group USCI_UART_EXPORTED_FUNCTIONS */ /*@}*/ /* end of group USCI_UART_Driver */ /*@}*/ /* end of group Standard_Driver */ #ifdef __cplusplus } #endif #endif /* __NU_USCI_UART_H__ */ /*** (C) COPYRIGHT 2018 Nuvoton Technology Corp. ***/