/* * Copyright : (C) 2022 Phytium Information Technology, Inc. * All Rights Reserved. * * This program is OPEN SOURCE software: you can redistribute it and/or modify it * under the terms of the Phytium Public License as published by the Phytium Technology Co.,Ltd, * either version 1.0 of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful,but WITHOUT ANY WARRANTY; * without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. * See the Phytium Public License for more details. * * * FilePath: fi2c_hw.h * Date: 2021-11-01 14:53:42 * LastEditTime: 2022-02-18 08:36:32 * Description:  This file is for I2C register definition * * Modify History: * Ver   Who        Date         Changes * ----- ------     --------    -------------------------------------- * 1.0 zhugengyu 2021/11/1 first commit * 1.1 liushengming 2022/02/18 add fi2c_slave mode */ #ifndef FI2C_HW_H #define FI2C_HW_H /* - 传入模块基地址，不能复杂结构体 - hardware interface of device || low-level driver function prototypes - 包括驱动寄存器参数和low-level操作定义 1. 定义寄存器偏移 2. 对上提供该模块寄存器操作的接口 3. 一些简单外设提供直接操作接口 4. 可以定义一些状态的接口，用于响应驱动状态的变化 */ /***************************** Include Files *********************************/ #include "fparameters.h" #include "fio.h" #include "ferror_code.h" #include "fkernel.h" #ifdef __cplusplus extern "C" { #endif /************************** Constant Definitions *****************************/ /** @name Register Map * * Register offsets from the base address of an I2C device. * @{ */ #define FI2C_CON_OFFSET 0x00 #define FI2C_TAR_OFFSET 0x04 #define FI2C_SAR_OFFSET 0x08 #define FI2C_HS_MADDR_OFFSET 0x0C #define FI2C_DATA_CMD_OFFSET 0x10 #define FI2C_SS_SCL_HCNT_OFFSET 0x14 #define FI2C_SS_SCL_LCNT_OFFSET 0x18 #define FI2C_FS_SCL_HCNT_OFFSET 0x1C #define FI2C_FS_SCL_LCNT_OFFSET 0x20 #define FI2C_HS_SCL_HCNT_OFFSET 0x24 #define FI2C_HS_SCL_LCNT_OFFSET 0x28 #define FI2C_INTR_STAT_OFFSET 0x2C #define FI2C_INTR_MASK_OFFSET 0x30 #define FI2C_RAW_INTR_STAT_OFFSET 0x34 #define FI2C_RX_TL_OFFSET 0x38 #define FI2C_TX_TL_OFFSET 0x3C #define FI2C_CLR_INTR_OFFSET 0x40 #define FI2C_CLR_RX_UNDER_OFFSET 0x44 #define FI2C_CLR_RX_OVER_OFFSET 0x48 #define FI2C_CLR_TX_OVER_OFFSET 0x4C #define FI2C_CLR_RD_REQ_OFFSET 0x50 #define FI2C_CLR_TX_ABRT_OFFSET 0x54 #define FI2C_CLR_RX_DONE_OFFSET 0x58 #define FI2C_CLR_ACTIVITY_OFFSET 0x5c #define FI2C_CLR_STOP_DET_OFFSET 0x60 #define FI2C_CLR_START_DET_OFFSET 0x64 #define FI2C_CLR_GEN_CALL_OFFSET 0x68 #define FI2C_ENABLE_OFFSET 0x6C #define FI2C_STATUS_OFFSET 0x70 #define FI2C_TXFLR_OFFSET 0x74 #define FI2C_RXFLR_OFFSET 0x78 #define FI2C_SDA_HOLD_OFFSET 0x7c #define FI2C_TX_ABRT_SOURCE_OFFSET 0x80 #define FI2C_SLV_DATA_NACK_ONLY_OFFSET 0x84 #define FI2C_DMA_CR_OFFSET 0x88 #define FI2C_DMA_TDLR_OFFSET 0x8c #define FI2C_DMA_RDLR_OFFSET 0x90 #define FI2C_SDA_SETUP_OFFSET 0x94 #define FI2C_ACK_GENERAL_CALL_OFFSET 0x98 #define FI2C_ENABLE_STATUS_OFFSET 0x9C #define FI2C_FS_SPKLEN_OFFSET 0xa0 #define FI2C_HS_SPKLEN_OFFSET 0xa4 #define FI2C_COMP_PARAM_1_OFFSET 0xf4 #define FI2C_COMP_VERSION_OFFSET 0xf8 #define FI2C_COMP_TYPE_OFFSET 0xfc /** @name FI2C_CON_OFFSET Register */ #define FI2C_CON_MASTER_MODE (0x1 << 0) #define FI2C_CON_SLAVE_MODE (0x0 << 0) #define FI2C_CON_SPEED_MASK GENMASK(2, 1) #define FI2C_CON_STD_SPEED (0x1 << 1) #define FI2C_CON_FAST_SPEED (0x2 << 1) #define FI2C_CON_HIGH_SPEED (0x3 << 1) /* for slave mode */ #define FI2C_CON_SLAVE_ADR_7BIT (0x0 << 3) #define FI2C_CON_SLAVE_ADR_10BIT (0x1 << 3) /* for master mode */ #define FI2C_CON_MASTER_ADR_7BIT (0x0 << 4) #define FI2C_CON_MASTER_ADR_10BIT (0x1 << 4) #define FI2C_CON_RESTART_EN (0x1 << 5) #define FI2C_CON_SLAVE_DISABLE (0x1 << 6) /** @name FI2C_TAR_OFFSET Register */ #define FI2C_IC_TAR_MASK GENMASK(9, 0) #define FI2C_GC_OR_START (0x1 << 10) #define FI2C_SPECIAL (0x1 << 11) #define FI2C_TAR_ADR_7BIT (0x0 << 12) #define FI2C_TAR_ADR_10BIT (0x1 << 12) /** @name FI2C_SAR_OFFSET Register */ #define FI2C_IC_SAR_MASK GENMASK(9, 0) //Slave addr when in slave mode /** @name FI2C_HS_MADDR_OFFSET Register */ #define FI2C_IC_HS_MAR GENMASK(2, 0) //I2C High Speed模式主机编码 /** @name FI2C_DATA_CMD_OFFSET Register */ #define FI2C_DATA_MASK GENMASK(7, 0) #define FI2C_DATA_CMD_READ (0x1 << 8) #define FI2C_DATA_CMD_WRITE (0x0 << 8) #define FI2C_DATA_CMD_STOP (0x1 << 9) #define FI2C_DATA_CMD_RESTART (0x1 << 10) /** @name FI2C_INTR_STAT_OFFSET Register * @name FI2C_INTR_MASK_OFFSET Register * @name FI2C_RAW_INTR_STAT_OFFSET Register */ #define FI2C_INTR_RX_UNDER (0x1 << 0) /* 接收缓冲区为空 */ #define FI2C_INTR_RX_OVER (0x1 << 1) /* 接收缓冲区大小达到 IC_RX_BUFFER_DEPTH ，且还继续从外部接收数据 */ #define FI2C_INTR_RX_FULL (0x1 << 2) /* 接收缓冲区大于等于 IC_RX_TL 中设定的门限值（RX_TL) */ #define FI2C_INTR_TX_OVER (0x1 << 3) /* 发送缓冲区大小达到 IC_TX_BUFFER_DEPTH，并且还在尝试写数据 */ #define FI2C_INTR_TX_EMPTY (0x1 << 4) /* 发送缓冲区小于等于 IC_TX_TL 寄存器中设定的门限值 */ #define FI2C_INTR_RD_REQ (0x1 << 5) /* 读请求标志 */ #define FI2C_INTR_TX_ABRT (0x1 << 6) /* I2C 不能完成FIFO内容的传输 */ #define FI2C_INTR_RX_DONE (0x1 << 7) /* Slave工作模式下，规定时间内没有Master的回应，通信结束 */ #define FI2C_INTR_ACTIVITY (0x1 << 8) /* I2C 控制器的活动状态 */ #define FI2C_INTR_STOP_DET (0x1 << 9) /* I2C 总线接口上是否产生了 STOP */ #define FI2C_INTR_START_DET (0x1 << 10) /* I2C 总线接口上是否产生了 START 或 RESTART */ #define FI2C_INTR_GEN_CALL (0x1 << 11) /* I2C 总线接口上接收并识别到General Call格式 */ #define FI2C_INTR_ALL_MASK 0x8FF #define FI2C_INTR_MASTER_WR_MASK (FI2C_INTR_TX_EMPTY | FI2C_INTR_TX_ABRT) #define FI2C_INTR_MASTER_RD_MASK (FI2C_INTR_MASTER_WR_MASK | FI2C_INTR_RX_FULL) #define FI2C_INTR_SLAVE_DEF_MASK (FI2C_INTR_RX_FULL | FI2C_INTR_STOP_DET | \ FI2C_INTR_RD_REQ | FI2C_INTR_RX_DONE | \ FI2C_INTR_RX_UNDER | FI2C_INTR_TX_ABRT |\ FI2C_INTR_START_DET) /** @name FI2C_RX_TL_OFFSET Register */ #define FI2C_RX_TL_MASK GENMASK(7, 0) /** @name FI2C_TX_TL_OFFSET Register */ #define FI2C_TX_TL_MASK GENMASK(7, 0) /** @name FI2C_IC_ENABLE_OFFSET Register */ #define FI2C_ENABLE_CONTROLLER (0x1 << 0) #define FI2C_DISABLE_CONTROLLER (0x0 << 0) /** @name FI2C_STATUS_OFFSET Register */ #define FI2C_STATUS_ACTIVITY (0x1 << 0) #define FI2C_STATUS_TFNF (0x1 << 1) #define FI2C_STATUS_TFE (0x1 << 2) #define FI2C_STATUS_RFNE (0x1 << 3) #define FI2C_STATUS_RFF (0x1 << 4) #define FI2C_STATUS_MST_ACTIVITY (0x1 << 5) #define FI2C_STATUS_SLV_ACTIVITY (0x1 << 6) /** @name FI2C_ENABLE_OFFSET Register */ #define FI2C_IC_ENABLE (0x1 << 0) #define FI2C_IC_DISABLE (0x0 << 0) #define FI2C_IC_ENABLE_MASK (0x1 << 0) #define FI2C_SLV_DISABLED_WHILE_BUSY (0x1 << 1) #define FI2C_SLV_RX_DATA_LOST (0x1 << 2) /* High and low times in different speed modes (in ns) */ #define FI2C_MIN_SS_SCL_HIGHTIME 4000 #define FI2C_MIN_SS_SCL_LOWTIME 4700 #define FI2C_MIN_FS_SCL_HIGHTIME 600 #define FI2C_MIN_FS_SCL_LOWTIME 1300 #define FI2C_MIN_FP_SCL_HIGHTIME 500 #define FI2C_MIN_FP_SCL_LOWTIME 500 #define FI2C_MIN_HS_SCL_HIGHTIME 60 #define FI2C_MIN_HS_SCL_LOWTIME 160 #define FI2C_DEFAULT_SDA_HOLD_TIME 300 #define FI2C_READ_REG32(addr, reg_offset) FtIn32((addr) + (u32)(reg_offset)) #define FI2C_WRITE_REG32(addr, reg_offset, reg_value) FtOut32((addr) + (u32)(reg_offset), (u32)(reg_value)) #define FI2C_IIC_FIFO_MAX_LV 8 /**************************** Type Definitions *******************************/ /************************** Variable Definitions *****************************/ enum { FI2C_STANDARD_SPEED = 0, FI2C_FAST_SPEED, FI2C_SPEED_MODE_MAX }; /***************** Macros (Inline Functions) Definitions *********************/ #define FI2C_GET_INTRRUPT_MASK(addr) FI2C_READ_REG32((addr), FI2C_INTR_MASK_OFFSET) #define FI2C_SET_INTRRUPT_MASK(addr, mask) FI2C_WRITE_REG32((addr), FI2C_INTR_MASK_OFFSET, (mask)) #define FI2C_CLEAR_INTR_STATUS(addr) FI2C_READ_REG32((addr), FI2C_CLR_INTR_OFFSET) #define FI2C_GET_STATUS(addr) FI2C_READ_REG32((addr), FI2C_STATUS_OFFSET) #define FI2C_READ_DATA(addr) (u8)(FI2C_DATA_MASK & FI2C_READ_REG32(addr, FI2C_DATA_CMD_OFFSET)) #define FI2C_WRITE_DATA(addr, dat) FI2C_WRITE_REG32((addr), FI2C_DATA_CMD_OFFSET, (dat)) #define FI2C_SET_RX_TL(addr, level) FI2C_WRITE_REG32((addr), FI2C_RX_TL_OFFSET, (level)) #define FI2C_SET_TX_TL(addr, level) FI2C_WRITE_REG32((addr), FI2C_TX_TL_OFFSET, (level)) #define FI2C_READ_INTR_STAT(addr) FI2C_READ_REG32((addr), FI2C_INTR_STAT_OFFSET) #define FI2C_READ_RAW_INTR_STAT(addr) FI2C_READ_REG32((addr), FI2C_RAW_INTR_STAT_OFFSET) inline static u32 FI2cGetEnable(uintptr addr) { return FI2C_READ_REG32(addr, FI2C_ENABLE_STATUS_OFFSET); } /************************** Function Prototypes ******************************/ FError FI2cSetEnable(uintptr addr, boolean enable); FError FI2cSetSpeed(uintptr addr, u32 speed_rate); FError FI2cWaitStatus(uintptr addr, u32 stat_bit); FError FI2cWaitBusBusy(uintptr addr); FError FI2cSetTar(uintptr addr, u32 tar_addr); FError FI2cSetSar(uintptr addr, u32 sar_addr); FError FI2cFlushRxFifo(uintptr addr); u32 FI2cClearIntrBits(uintptr addr, u32 *last_err_p); #ifdef __cplusplus } #endif #endif