//***************************************************************************** // // hw_lcd.h - Defines and macros used when accessing the LCD controller. // // Copyright (c) 2011-2020 Texas Instruments Incorporated. All rights reserved. // Software License Agreement // // Redistribution and use in source and binary forms, with or without // modification, are permitted provided that the following conditions // are met: // // Redistributions of source code must retain the above copyright // notice, this list of conditions and the following disclaimer. // // Redistributions in binary form must reproduce the above copyright // notice, this list of conditions and the following disclaimer in the // documentation and/or other materials provided with the // distribution. // // Neither the name of Texas Instruments Incorporated nor the names of // its contributors may be used to endorse or promote products derived // from this software without specific prior written permission. // // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS // "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT // LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR // A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT // OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, // SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT // LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, // DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT // (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE // OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. // // This is part of revision 2.2.0.295 of the Tiva Firmware Development Package. // //***************************************************************************** #ifndef __HW_LCD_H__ #define __HW_LCD_H__ //***************************************************************************** // // The following are defines for the LCD register offsets. // //***************************************************************************** #define LCD_O_PID 0x00000000 // LCD PID Register Format #define LCD_O_CTL 0x00000004 // LCD Control #define LCD_O_LIDDCTL 0x0000000C // LCD LIDD Control #define LCD_O_LIDDCS0CFG 0x00000010 // LCD LIDD CS0 Configuration #define LCD_O_LIDDCS0ADDR 0x00000014 // LIDD CS0 Read/Write Address #define LCD_O_LIDDCS0DATA 0x00000018 // LIDD CS0 Data Read/Write // Initiation #define LCD_O_LIDDCS1CFG 0x0000001C // LIDD CS1 Configuration #define LCD_O_LIDDCS1ADDR 0x00000020 // LIDD CS1 Address Read/Write // Initiation #define LCD_O_LIDDCS1DATA 0x00000024 // LIDD CS1 Data Read/Write // Initiation #define LCD_O_RASTRCTL 0x00000028 // LCD Raster Control #define LCD_O_RASTRTIM0 0x0000002C // LCD Raster Timing 0 #define LCD_O_RASTRTIM1 0x00000030 // LCD Raster Timing 1 #define LCD_O_RASTRTIM2 0x00000034 // LCD Raster Timing 2 #define LCD_O_RASTRSUBP1 0x00000038 // LCD Raster Subpanel Display 1 #define LCD_O_RASTRSUBP2 0x0000003C // LCD Raster Subpanel Display 2 #define LCD_O_DMACTL 0x00000040 // LCD DMA Control #define LCD_O_DMABAFB0 0x00000044 // LCD DMA Frame Buffer 0 Base // Address #define LCD_O_DMACAFB0 0x00000048 // LCD DMA Frame Buffer 0 Ceiling // Address #define LCD_O_DMABAFB1 0x0000004C // LCD DMA Frame Buffer 1 Base // Address #define LCD_O_DMACAFB1 0x00000050 // LCD DMA Frame Buffer 1 Ceiling // Address #define LCD_O_SYSCFG 0x00000054 // LCD System Configuration // Register #define LCD_O_RISSET 0x00000058 // LCD Interrupt Raw Status and Set // Register #define LCD_O_MISCLR 0x0000005C // LCD Interrupt Status and Clear #define LCD_O_IM 0x00000060 // LCD Interrupt Mask #define LCD_O_IENC 0x00000064 // LCD Interrupt Enable Clear #define LCD_O_CLKEN 0x0000006C // LCD Clock Enable #define LCD_O_CLKRESET 0x00000070 // LCD Clock Resets //***************************************************************************** // // The following are defines for the bit fields in the LCD_O_PID register. // //***************************************************************************** #define LCD_PID_MAJOR_M 0x00000700 // Major Release Number #define LCD_PID_MINOR_M 0x0000003F // Minor Release Number #define LCD_PID_MAJOR_S 8 #define LCD_PID_MINOR_S 0 //***************************************************************************** // // The following are defines for the bit fields in the LCD_O_CTL register. // //***************************************************************************** #define LCD_CTL_CLKDIV_M 0x0000FF00 // Clock Divisor #define LCD_CTL_UFLOWRST 0x00000002 // Underflow Restart #define LCD_CTL_LCDMODE 0x00000001 // LCD Mode Select #define LCD_CTL_CLKDIV_S 8 //***************************************************************************** // // The following are defines for the bit fields in the LCD_O_LIDDCTL register. // //***************************************************************************** #define LCD_LIDDCTL_DMACS 0x00000200 // CS0/CS1 Select for LIDD DMA // Writes #define LCD_LIDDCTL_DMAEN 0x00000100 // LIDD DMA Enable #define LCD_LIDDCTL_CS1E1 0x00000080 // Chip Select 1 (CS1)/Enable 1(E1) // Polarity Control #define LCD_LIDDCTL_CS0E0 0x00000040 // Chip Select 0 (CS0)/Enable 0 // (E0) Polarity Control #define LCD_LIDDCTL_WRDIRINV 0x00000020 // Write Strobe (WR) /Direction // (DIR) Polarity Control #define LCD_LIDDCTL_RDEN 0x00000010 // Read Strobe (RD) /Direct Enable // (EN) Polarity Control #define LCD_LIDDCTL_ALE 0x00000008 // Address Latch Enable (ALE) // Polarity Control #define LCD_LIDDCTL_MODE_M 0x00000007 // LIDD Mode Select #define LCD_LIDDCTL_MODE_SYNCM68 \ 0x00000000 // Synchronous Motorola 6800 Mode #define LCD_LIDDCTL_MODE_ASYNCM68 \ 0x00000001 // Asynchronous Motorola 6800 Mode #define LCD_LIDDCTL_MODE_SYNCM80 \ 0x00000002 // Synchronous Intel 8080 mode #define LCD_LIDDCTL_MODE_ASYNCM80 \ 0x00000003 // Asynchronous Intel 8080 mode #define LCD_LIDDCTL_MODE_ASYNCHIT \ 0x00000004 // Asynchronous Hitachi mode //***************************************************************************** // // The following are defines for the bit fields in the LCD_O_LIDDCS0CFG // register. // //***************************************************************************** #define LCD_LIDDCS0CFG_WRSU_M 0xF8000000 // Write Strobe (WR) Set-Up Cycles #define LCD_LIDDCS0CFG_WRDUR_M 0x07E00000 // Write Strobe (WR) Duration // Cycles #define LCD_LIDDCS0CFG_WRHOLD_M 0x001E0000 // Write Strobe (WR) Hold cycles #define LCD_LIDDCS0CFG_RDSU_M 0x0001F000 // Read Strobe (RD) Set-Up cycles #define LCD_LIDDCS0CFG_RDDUR_M 0x00000FC0 // Read Strobe (RD) Duration cycles #define LCD_LIDDCS0CFG_RDHOLD_M 0x0000003C // Read Strobe (RD) Hold cycles #define LCD_LIDDCS0CFG_GAP_M 0x00000003 // Field value defines the number // of LCDMCLK cycles (GAP +1) // between the end of one CS0 // (LCDAC) device access and the // start of another CS0 (LCDAC) // device access unless the two // accesses are both reads #define LCD_LIDDCS0CFG_WRSU_S 27 #define LCD_LIDDCS0CFG_WRDUR_S 21 #define LCD_LIDDCS0CFG_WRHOLD_S 17 #define LCD_LIDDCS0CFG_RDSU_S 12 #define LCD_LIDDCS0CFG_RDDUR_S 6 #define LCD_LIDDCS0CFG_RDHOLD_S 2 #define LCD_LIDDCS0CFG_GAP_S 0 //***************************************************************************** // // The following are defines for the bit fields in the LCD_O_LIDDCS0ADDR // register. // //***************************************************************************** #define LCD_LIDDCS0ADDR_CS0ADDR_M \ 0x0000FFFF // LCD Address #define LCD_LIDDCS0ADDR_CS0ADDR_S \ 0 //***************************************************************************** // // The following are defines for the bit fields in the LCD_O_LIDDCS0DATA // register. // //***************************************************************************** #define LCD_LIDDCS0DATA_CS0DATA_M \ 0x0000FFFF // LCD Data Read/Write #define LCD_LIDDCS0DATA_CS0DATA_S \ 0 //***************************************************************************** // // The following are defines for the bit fields in the LCD_O_LIDDCS1CFG // register. // //***************************************************************************** #define LCD_LIDDCS1CFG_WRSU_M 0xF8000000 // Write Strobe (WR) Set-Up Cycles #define LCD_LIDDCS1CFG_WRDUR_M 0x07E00000 // Write Strobe (WR) Duration // Cycles #define LCD_LIDDCS1CFG_WRHOLD_M 0x001E0000 // Write Strobe (WR) Hold cycles #define LCD_LIDDCS1CFG_RDSU_M 0x0001F000 // Read Strobe (RD) Set-Up cycles #define LCD_LIDDCS1CFG_RDDUR_M 0x00000FC0 // Read Strobe (RD) Duration cycles #define LCD_LIDDCS1CFG_RDHOLD_M 0x0000003C // Read Strobe (RD) Hold cycles #define LCD_LIDDCS1CFG_GAP_M 0x00000003 // Field value defines the number // of LCDMCLK cycles (GAP + 1) // between the end of one CS1 // (LCDAC) device access and the // start of another CS0 (LCDAC) // device access unless the two // accesses are both reads #define LCD_LIDDCS1CFG_WRSU_S 27 #define LCD_LIDDCS1CFG_WRDUR_S 21 #define LCD_LIDDCS1CFG_WRHOLD_S 17 #define LCD_LIDDCS1CFG_RDSU_S 12 #define LCD_LIDDCS1CFG_RDDUR_S 6 #define LCD_LIDDCS1CFG_RDHOLD_S 2 #define LCD_LIDDCS1CFG_GAP_S 0 //***************************************************************************** // // The following are defines for the bit fields in the LCD_O_LIDDCS1ADDR // register. // //***************************************************************************** #define LCD_LIDDCS1ADDR_CS1ADDR_M \ 0x0000FFFF // LCD Address Bus #define LCD_LIDDCS1ADDR_CS1ADDR_S \ 0 //***************************************************************************** // // The following are defines for the bit fields in the LCD_O_LIDDCS1DATA // register. // //***************************************************************************** #define LCD_LIDDCS1DATA_CS0DATA_M \ 0x0000FFFF // LCD Data Read/Write Initiation #define LCD_LIDDCS1DATA_CS0DATA_S \ 0 //***************************************************************************** // // The following are defines for the bit fields in the LCD_O_RASTRCTL register. // //***************************************************************************** #define LCD_RASTRCTL_TFT24UPCK 0x04000000 // 24-bit TFT Mode Packing #define LCD_RASTRCTL_TFT24 0x02000000 // 24-Bit TFT Mode #define LCD_RASTRCTL_FRMBUFSZ 0x01000000 // Frame Buffer Select #define LCD_RASTRCTL_TFTMAP 0x00800000 // TFT Mode Alternate Signal // Mapping for Palettized // Framebuffer #define LCD_RASTRCTL_NIBMODE 0x00400000 // Nibble Mode #define LCD_RASTRCTL_PALMODE_M 0x00300000 // Pallette Loading Mode #define LCD_RASTRCTL_PALMODE_PALDAT \ 0x00000000 // Palette and data loading, reset // value #define LCD_RASTRCTL_PALMODE_PAL \ 0x00100000 // Palette loading only #define LCD_RASTRCTL_PALMODE_DAT \ 0x00200000 // Data loading only #define LCD_RASTRCTL_REQDLY_M 0x000FF000 // Palette Loading Delay #define LCD_RASTRCTL_MONO8B 0x00000200 // Mono 8-Bit #define LCD_RASTRCTL_RDORDER 0x00000100 // Raster Data Order Select #define LCD_RASTRCTL_LCDTFT 0x00000080 // LCD TFT #define LCD_RASTRCTL_LCDBW 0x00000002 // LCD Monochrome #define LCD_RASTRCTL_LCDEN 0x00000001 // LCD Controller Enable for Raster // Operations #define LCD_RASTRCTL_REQDLY_S 12 //***************************************************************************** // // The following are defines for the bit fields in the LCD_O_RASTRTIM0 // register. // //***************************************************************************** #define LCD_RASTRTIM0_HBP_M 0xFF000000 // Horizontal Back Porch Lowbits #define LCD_RASTRTIM0_HFP_M 0x00FF0000 // Horizontal Front Porch Lowbits #define LCD_RASTRTIM0_HSW_M 0x0000FC00 // Horizontal Sync Pulse Width // Lowbits #define LCD_RASTRTIM0_PPL_M 0x000003F0 // Pixels-per-line LSB[9:4] #define LCD_RASTRTIM0_MSBPPL 0x00000008 // Pixels-per-line MSB[10] #define LCD_RASTRTIM0_HBP_S 24 #define LCD_RASTRTIM0_HFP_S 16 #define LCD_RASTRTIM0_HSW_S 10 #define LCD_RASTRTIM0_PPL_S 4 #define LCD_RASTRTIM0_MSBPPL_S 3 //***************************************************************************** // // The following are defines for the bit fields in the LCD_O_RASTRTIM1 // register. // //***************************************************************************** #define LCD_RASTRTIM1_VBP_M 0xFF000000 // Vertical Back Porch #define LCD_RASTRTIM1_VFP_M 0x00FF0000 // Vertical Front Porch #define LCD_RASTRTIM1_VSW_M 0x0000FC00 // Vertical Sync Width Pulse #define LCD_RASTRTIM1_LPP_M 0x000003FF // Lines Per Panel #define LCD_RASTRTIM1_VBP_S 24 #define LCD_RASTRTIM1_VFP_S 16 #define LCD_RASTRTIM1_VSW_S 10 #define LCD_RASTRTIM1_LPP_S 0 //***************************************************************************** // // The following are defines for the bit fields in the LCD_O_RASTRTIM2 // register. // //***************************************************************************** #define LCD_RASTRTIM2_HSW_M 0x78000000 // Bits 9:6 of the horizontal sync // width field #define LCD_RASTRTIM2_MSBLPP 0x04000000 // MSB of Lines Per Panel #define LCD_RASTRTIM2_PXLCLKCTL 0x02000000 // Hsync/Vsync Pixel Clock Control // On/Off #define LCD_RASTRTIM2_PSYNCRF 0x01000000 // Program HSYNC/VSYNC Rise or Fall #define LCD_RASTRTIM2_INVOE 0x00800000 // Invert Output Enable #define LCD_RASTRTIM2_INVPXLCLK 0x00400000 // Invert Pixel Clock #define LCD_RASTRTIM2_IHS 0x00200000 // Invert Hysync #define LCD_RASTRTIM2_IVS 0x00100000 // Invert Vsync #define LCD_RASTRTIM2_ACBI_M 0x000F0000 // AC Bias Pins Transitions per // Interrupt #define LCD_RASTRTIM2_ACBF_M 0x0000FF00 // AC Bias Pin Frequency #define LCD_RASTRTIM2_MSBHBP_M 0x00000030 // Bits 9:8 of the horizontal back // porch field #define LCD_RASTRTIM2_MSBHFP_M 0x00000003 // Bits 9:8 of the horizontal front // porch field #define LCD_RASTRTIM2_HSW_S 27 #define LCD_RASTRTIM2_MSBLPP_S 26 #define LCD_RASTRTIM2_ACBI_S 16 #define LCD_RASTRTIM2_ACBF_S 8 #define LCD_RASTRTIM2_MSBHBP_S 4 #define LCD_RASTRTIM2_MSBHFP_S 0 //***************************************************************************** // // The following are defines for the bit fields in the LCD_O_RASTRSUBP1 // register. // //***************************************************************************** #define LCD_RASTRSUBP1_SPEN 0x80000000 // Sub Panel Enable #define LCD_RASTRSUBP1_HOLS 0x20000000 // High or Low Signal #define LCD_RASTRSUBP1_LPPT_M 0x03FF0000 // Line Per Panel Threshold #define LCD_RASTRSUBP1_DPDLSB_M 0x0000FFFF // Default Pixel Data LSB[15:0] #define LCD_RASTRSUBP1_LPPT_S 16 #define LCD_RASTRSUBP1_DPDLSB_S 0 //***************************************************************************** // // The following are defines for the bit fields in the LCD_O_RASTRSUBP2 // register. // //***************************************************************************** #define LCD_RASTRSUBP2_LPPTMSB 0x00000100 // Lines Per Panel Threshold Bit 10 #define LCD_RASTRSUBP2_DPDMSB_M 0x000000FF // Default Pixel Data MSB [23:16] #define LCD_RASTRSUBP2_DPDMSB_S 0 //***************************************************************************** // // The following are defines for the bit fields in the LCD_O_DMACTL register. // //***************************************************************************** #define LCD_DMACTL_FIFORDY_M 0x00000700 // DMA FIFO threshold #define LCD_DMACTL_FIFORDY_8 0x00000000 // 8 words #define LCD_DMACTL_FIFORDY_16 0x00000100 // 16 words #define LCD_DMACTL_FIFORDY_32 0x00000200 // 32 words #define LCD_DMACTL_FIFORDY_64 0x00000300 // 64 words #define LCD_DMACTL_FIFORDY_128 0x00000400 // 128 words #define LCD_DMACTL_FIFORDY_256 0x00000500 // 256 words #define LCD_DMACTL_FIFORDY_512 0x00000600 // 512 words #define LCD_DMACTL_BURSTSZ_M 0x00000070 // Burst Size setting for DMA // transfers (all DMA transfers are // 32 bits wide): #define LCD_DMACTL_BURSTSZ_4 0x00000020 // burst size of 4 #define LCD_DMACTL_BURSTSZ_8 0x00000030 // burst size of 8 #define LCD_DMACTL_BURSTSZ_16 0x00000040 // burst size of 16 #define LCD_DMACTL_BYTESWAP 0x00000008 // This bit controls the bytelane // ordering of the data on the // output of the DMA module #define LCD_DMACTL_BIGDEND 0x00000002 // Big Endian Enable #define LCD_DMACTL_FMODE 0x00000001 // Frame Mode //***************************************************************************** // // The following are defines for the bit fields in the LCD_O_DMABAFB0 register. // //***************************************************************************** #define LCD_DMABAFB0_FB0BA_M 0xFFFFFFFC // Frame Buffer 0 Base Address // pointer #define LCD_DMABAFB0_FB0BA_S 2 //***************************************************************************** // // The following are defines for the bit fields in the LCD_O_DMACAFB0 register. // //***************************************************************************** #define LCD_DMACAFB0_FB0CA_M 0xFFFFFFFC // Frame Buffer 0 Ceiling Address // pointer #define LCD_DMACAFB0_FB0CA_S 2 //***************************************************************************** // // The following are defines for the bit fields in the LCD_O_DMABAFB1 register. // //***************************************************************************** #define LCD_DMABAFB1_FB1BA_M 0xFFFFFFFC // Frame Buffer 1 Base Address // pointer #define LCD_DMABAFB1_FB1BA_S 2 //***************************************************************************** // // The following are defines for the bit fields in the LCD_O_DMACAFB1 register. // //***************************************************************************** #define LCD_DMACAFB1_FB1CA_M 0xFFFFFFFC // Frame Buffer 1 Ceiling Address // pointer #define LCD_DMACAFB1_FB1CA_S 2 //***************************************************************************** // // The following are defines for the bit fields in the LCD_O_SYSCFG register. // //***************************************************************************** #define LCD_SYSCFG_STDBY_M 0x00000030 // Standby Mode #define LCD_SYSCFG_STDBY_FORCE 0x00000000 // Force-standby mode: local // initiator is unconditionally // placed in standby state. Backup // mode, for debug only #define LCD_SYSCFG_STDBY_NONE 0x00000010 // No-standby mode: local initiator // is unconditionally placed out of // standby state. Backup mode, for // debug only #define LCD_SYSCFG_STDBY_SMART 0x00000020 // Smart-standby mode: local // initiator standby status depends // on local conditions, that is, // the module's functional // requirement from the initiator. // IP module shall not generate // (initiator-related) wakeup // events #define LCD_SYSCFG_IDLEMODE_M 0x0000000C // Idle Mode #define LCD_SYSCFG_IDLEMODE_FORCE \ 0x00000000 // Force-idle mode: local target's // idle state follows // (acknowledges) the system's idle // requests unconditionally, that // is, regardless of the IP // module's internal requirements. // Backup mode, for debug only #define LCD_SYSCFG_IDLEMODE_NONE \ 0x00000004 // No-idle mode: local target never // enters idle state. Backup mode, // for debug only #define LCD_SYSCFG_IDLEMODE_SMART \ 0x00000008 // Smart-idle mode: local target's // idle state eventually follows // (acknowledges) the system's idle // requests, depending on the IP // module's internal requirements. // IP module shall not generate // (IRQ- or DMA-requestrelated) // wakeup events //***************************************************************************** // // The following are defines for the bit fields in the LCD_O_RISSET register. // //***************************************************************************** #define LCD_RISSET_EOF1 0x00000200 // DMA End-of-Frame 1 Raw Interrupt // Status and Set #define LCD_RISSET_EOF0 0x00000100 // DMA End-of-Frame 0 Raw Interrupt // Status and Set #define LCD_RISSET_PALLOAD 0x00000040 // DMA Palette Loaded Raw Interrupt // Status and Set #define LCD_RISSET_FIFOU 0x00000020 // DMA FIFO Underflow Raw Interrupt // Status and Set #define LCD_RISSET_ACBS 0x00000008 // AC Bias Count Raw Interrupt // Status and Set #define LCD_RISSET_SYNCS 0x00000004 // Frame Synchronization Lost Raw // Interrupt Status and Set #define LCD_RISSET_RRASTRDONE 0x00000002 // Raster Mode Frame Done interrupt #define LCD_RISSET_DONE 0x00000001 // Raster or LIDD Frame Done // (shared, depends on whether // Raster or LIDD mode enabled) Raw // Interrupt Status and Set //***************************************************************************** // // The following are defines for the bit fields in the LCD_O_MISCLR register. // //***************************************************************************** #define LCD_MISCLR_EOF1 0x00000200 // DMA End-of-Frame 1 Enabled // Interrupt and Clear #define LCD_MISCLR_EOF0 0x00000100 // DMA End-of-Frame 0 Raw Interrupt // and Clear #define LCD_MISCLR_PALLOAD 0x00000040 // DMA Palette Loaded Enabled // Interrupt and Clear #define LCD_MISCLR_FIFOU 0x00000020 // DMA FIFO Underflow Enabled // Interrupt and Clear #define LCD_MISCLR_ACBS 0x00000008 // AC Bias Count Enabled Interrupt // and Clear #define LCD_MISCLR_SYNCS 0x00000004 // Frame Synchronization Lost // Enabled Interrupt and Clear #define LCD_MISCLR_RRASTRDONE 0x00000002 // Raster Mode Frame Done interrupt #define LCD_MISCLR_DONE 0x00000001 // Raster or LIDD Frame Done // (shared, depends on whether // Raster or LIDD mode enabled) // Enabled Interrupt and Clear //***************************************************************************** // // The following are defines for the bit fields in the LCD_O_IM register. // //***************************************************************************** #define LCD_IM_EOF1 0x00000200 // DMA End-of-Frame 1 Interrupt // Enable Set #define LCD_IM_EOF0 0x00000100 // DMA End-of-Frame 0 Interrupt // Enable Set #define LCD_IM_PALLOAD 0x00000040 // DMA Palette Loaded Interrupt // Enable Set #define LCD_IM_FIFOU 0x00000020 // DMA FIFO Underflow Interrupt // Enable Set #define LCD_IM_ACBS 0x00000008 // AC Bias Count Interrupt Enable // Set #define LCD_IM_SYNCS 0x00000004 // Frame Synchronization Lost // Interrupt Enable Set #define LCD_IM_RRASTRDONE 0x00000002 // Raster Mode Frame Done Interrupt // Enable Set #define LCD_IM_DONE 0x00000001 // Raster or LIDD Frame Done // (shared, depends on whether // Raster or LIDD mode enabled) // Interrupt Enable Set //***************************************************************************** // // The following are defines for the bit fields in the LCD_O_IENC register. // //***************************************************************************** #define LCD_IENC_EOF1 0x00000200 // DMA End-of-Frame 1 Interrupt // Enable Clear #define LCD_IENC_EOF0 0x00000100 // DMA End-of-Frame 0 Interrupt // Enable Clear #define LCD_IENC_PALLOAD 0x00000040 // DMA Palette Loaded Interrupt // Enable Clear #define LCD_IENC_FIFOU 0x00000020 // DMA FIFO Underflow Interrupt // Enable Clear #define LCD_IENC_ACBS 0x00000008 // AC Bias Count Interrupt Enable // Clear #define LCD_IENC_SYNCS 0x00000004 // Frame Synchronization Lost // Interrupt Enable Clear #define LCD_IENC_RRASTRDONE 0x00000002 // Raster Mode Frame Done Interrupt // Enable Clear #define LCD_IENC_DONE 0x00000001 // Raster or LIDD Frame Done // (shared, depends on whether // Raster or LIDD mode enabled) // Interrupt Enable Clear //***************************************************************************** // // The following are defines for the bit fields in the LCD_O_CLKEN register. // //***************************************************************************** #define LCD_CLKEN_DMA 0x00000004 // DMA Clock Enable #define LCD_CLKEN_LIDD 0x00000002 // LIDD Submodule Clock Enable #define LCD_CLKEN_CORE 0x00000001 // LCD Core Clock Enable //***************************************************************************** // // The following are defines for the bit fields in the LCD_O_CLKRESET register. // //***************************************************************************** #define LCD_CLKRESET_MAIN 0x00000008 // Software Reset for the entire // LCD module #define LCD_CLKRESET_DMA 0x00000004 // Software Reset for the DMA // submodule #define LCD_CLKRESET_LIDD 0x00000002 // Software Reset for the LIDD // submodule (character displays) #define LCD_CLKRESET_CORE 0x00000001 // Software Reset for the Core, // which encompasses the Raster // Active Matrix and Passive Matrix // logic #endif // __HW_LCD_H__