/* * Copyright (c) 2006-2021, RT-Thread Development Team * * SPDX-License-Identifier: Apache-2.0 * * Change Logs: * Date Author Notes * 2018-05-24 ChenYong First version */ #ifndef SAL_SOCKET_H__ #define SAL_SOCKET_H__ #include #include #ifdef __cplusplus extern "C" { #endif #if !defined(socklen_t) && !defined(SOCKLEN_T_DEFINED) typedef uint32_t socklen_t; #endif #if !defined(sa_family_t) && !defined(SA_FAMILY_T_DEFINED) typedef uint8_t sa_family_t; #endif /* If your port already typedef's in_port_t, define IN_PORT_T_DEFINED to prevent this code from redefining it. */ #if !defined(in_port_t) && !defined(IN_PORT_T_DEFINED) typedef uint16_t in_port_t; #endif /* Socket protocol types (TCP/UDP/RAW) */ #define SOCK_STREAM 1 #define SOCK_DGRAM 2 #define SOCK_RAW 3 #define SOCK_PACKET 10 #define SOCK_NONBLOCK 04000 #define SOCK_CLOEXEC 02000000 #define SOCK_MAX (SOCK_CLOEXEC + 1) /* Option flags per-socket. These must match the SOF_ flags in ip.h (checked in init.c) */ #define SO_REUSEADDR 0x0004 /* Allow local address reuse */ #define SO_KEEPALIVE 0x0008 /* keep connections alive */ #define SO_BROADCAST 0x0020 /* permit to send and to receive broadcast messages (see IP_SOF_BROADCAST option) */ /* Additional options, not kept in so_options */ #define SO_DEBUG 0x0001 /* Unimplemented: turn on debugging info recording */ #define SO_ACCEPTCONN 0x0002 /* socket has had listen() */ #define SO_DONTROUTE 0x0010 /* Unimplemented: just use interface addresses */ #define SO_USELOOPBACK 0x0040 /* Unimplemented: bypass hardware when possible */ #define SO_LINGER 0x0080 /* linger on close if data present */ #define SO_DONTLINGER ((int)(~SO_LINGER)) #define SO_OOBINLINE 0x0100 /* Unimplemented: leave received OOB data in line */ #define SO_REUSEPORT 0x0200 /* Unimplemented: allow local address & port reuse */ #define SO_SNDBUF 0x1001 /* Unimplemented: send buffer size */ #define SO_RCVBUF 0x1002 /* receive buffer size */ #define SO_SNDLOWAT 0x1003 /* Unimplemented: send low-water mark */ #define SO_RCVLOWAT 0x1004 /* Unimplemented: receive low-water mark */ #define SO_SNDTIMEO 0x1005 /* send timeout */ #define SO_RCVTIMEO 0x1006 /* receive timeout */ #define SO_ERROR 0x1007 /* get error status and clear */ #define SO_TYPE 0x1008 /* get socket type */ #define SO_CONTIMEO 0x1009 /* Unimplemented: connect timeout */ #define SO_NO_CHECK 0x100a /* don't create UDP checksum */ /* Level number for (get/set)sockopt() to apply to socket itself */ #define SOL_SOCKET 0xfff /* options for socket level */ #define AF_UNSPEC 0 #define AF_UNIX 1 #define AF_INET 2 #define AF_INET6 10 #define AF_CAN 29 /* Controller Area Network */ #define AF_AT 45 /* AT socket */ #define AF_WIZ 46 /* WIZnet socket */ #define PF_UNIX AF_UNIX #define PF_INET AF_INET #define PF_INET6 AF_INET6 #define PF_UNSPEC AF_UNSPEC #define PF_CAN AF_CAN #define PF_AT AF_AT #define PF_WIZ AF_WIZ #define AF_MAX (AF_WIZ + 1) /* For now.. */ #define IPPROTO_IP 0 #define IPPROTO_ICMP 1 #define IPPROTO_TCP 6 #define IPPROTO_UDP 17 #define IPPROTO_IPV6 41 #define IPPROTO_ICMPV6 58 #define IPPROTO_UDPLITE 136 #define IPPROTO_RAW 255 /* Flags we can use with send and recv */ #define MSG_PEEK 0x01 /* Peeks at an incoming message */ #define MSG_WAITALL 0x02 /* Unimplemented: Requests that the function block until the full amount of data requested can be returned */ #define MSG_OOB 0x04 /* Unimplemented: Requests out-of-band data. The significance and semantics of out-of-band data are protocol-specific */ #define MSG_DONTWAIT 0x08 /* Nonblocking i/o for this operation only */ #define MSG_MORE 0x10 /* Sender will send more */ /* Options for level IPPROTO_IP */ #define IP_TOS 1 #define IP_TTL 2 /* Options for level IPPROTO_TCP */ #define TCP_NODELAY 0x01 /* don't delay send to coalesce packets */ #define TCP_KEEPALIVE 0x02 /* send KEEPALIVE probes when idle for pcb->keep_idle milliseconds */ #define TCP_KEEPIDLE 0x03 /* set pcb->keep_idle - Same as TCP_KEEPALIVE, but use seconds for get/setsockopt */ #define TCP_KEEPINTVL 0x04 /* set pcb->keep_intvl - Use seconds for get/setsockopt */ #define TCP_KEEPCNT 0x05 /* set pcb->keep_cnt - Use number of probes sent for get/setsockopt */ /* Options and types related to multicast membership */ #define IP_ADD_MEMBERSHIP 3 #define IP_DROP_MEMBERSHIP 4 /* Options and types for UDP multicast traffic handling */ #define IP_MULTICAST_TTL 5 #define IP_MULTICAST_IF 6 #define IP_MULTICAST_LOOP 7 typedef struct ip_mreq { struct in_addr imr_multiaddr; /* IP multicast address of group */ struct in_addr imr_interface; /* local IP address of interface */ } ip_mreq; /* The Type of Service provides an indication of the abstract parameters of the quality of service desired */ #define IPTOS_TOS_MASK 0x1E #define IPTOS_TOS(tos) ((tos) & IPTOS_TOS_MASK) #define IPTOS_LOWDELAY 0x10 #define IPTOS_THROUGHPUT 0x08 #define IPTOS_RELIABILITY 0x04 #define IPTOS_LOWCOST 0x02 #define IPTOS_MINCOST IPTOS_LOWCOST /* The Network Control precedence designation is intended to be used within a network only */ #define IPTOS_PREC_MASK 0xe0 #define IPTOS_PREC(tos) ((tos) & IPTOS_PREC_MASK) #define IPTOS_PREC_NETCONTROL 0xe0 #define IPTOS_PREC_INTERNETCONTROL 0xc0 #define IPTOS_PREC_CRITIC_ECP 0xa0 #define IPTOS_PREC_FLASHOVERRIDE 0x80 #define IPTOS_PREC_FLASH 0x60 #define IPTOS_PREC_IMMEDIATE 0x40 #define IPTOS_PREC_PRIORITY 0x20 #define IPTOS_PREC_ROUTINE 0x00 /* Options for shatdown type */ #ifndef SHUT_RD #define SHUT_RD 0 #define SHUT_WR 1 #define SHUT_RDWR 2 #endif struct sockaddr { uint8_t sa_len; sa_family_t sa_family; char sa_data[14]; }; /* Structure describing the address of an AF_LOCAL (aka AF_UNIX) socket. */ struct sockaddr_un { uint8_t sa_len; sa_family_t sa_family; char sun_path[108]; /* Path name. */ }; #if NETDEV_IPV4 /* members are in network byte order */ struct sockaddr_in { uint8_t sin_len; sa_family_t sin_family; in_port_t sin_port; struct in_addr sin_addr; #define SIN_ZERO_LEN 8 char sin_zero[SIN_ZERO_LEN]; }; #endif /* NETDEV_IPV4 */ #if NETDEV_IPV6 struct sockaddr_in6 { uint8_t sin6_len; /* length of this structure */ sa_family_t sin6_family; /* AF_INET6 */ in_port_t sin6_port; /* Transport layer port # */ uint32_t sin6_flowinfo; /* IPv6 flow information */ struct in6_addr sin6_addr; /* IPv6 address */ uint32_t sin6_scope_id; /* Set of interfaces for scope */ }; #endif /* NETDEV_IPV6 */ struct sockaddr_storage { uint8_t s2_len; sa_family_t ss_family; char s2_data1[2]; uint32_t s2_data2[3]; #if NETDEV_IPV6 uint32_t s2_data3[3]; #endif /* NETDEV_IPV6 */ }; #define IFNAMSIZ 16 struct sal_ifmap { unsigned long int mem_start; unsigned long int mem_end; unsigned short int base_addr; unsigned char irq; unsigned char dma; unsigned char port; }; struct sal_ifreq { union { char ifrn_name[IFNAMSIZ]; } ifr_ifrn; union { struct sockaddr ifru_addr; struct sockaddr ifru_dstaddr; struct sockaddr ifru_broadaddr; struct sockaddr ifru_netmask; struct sockaddr ifru_hwaddr; short int ifru_flags; int ifru_ivalue; int ifru_mtu; struct sal_ifmap ifru_map; char ifru_slave[IFNAMSIZ]; char ifru_newname[IFNAMSIZ]; char *ifru_data; } ifr_ifru; }; int sal_accept(int socket, struct sockaddr *addr, socklen_t *addrlen); int sal_bind(int socket, const struct sockaddr *name, socklen_t namelen); int sal_shutdown(int socket, int how); int sal_getpeername (int socket, struct sockaddr *name, socklen_t *namelen); int sal_getsockname (int socket, struct sockaddr *name, socklen_t *namelen); int sal_getsockopt (int socket, int level, int optname, void *optval, socklen_t *optlen); int sal_setsockopt (int socket, int level, int optname, const void *optval, socklen_t optlen); int sal_connect(int socket, const struct sockaddr *name, socklen_t namelen); int sal_listen(int socket, int backlog); int sal_recvfrom(int socket, void *mem, size_t len, int flags, struct sockaddr *from, socklen_t *fromlen); int sal_sendto(int socket, const void *dataptr, size_t size, int flags, const struct sockaddr *to, socklen_t tolen); int sal_socket(int domain, int type, int protocol); int sal_closesocket(int socket); int sal_ioctlsocket(int socket, long cmd, void *arg); #ifdef __cplusplus } #endif #endif /* SAL_SOCKET_H__ */