/* * Copyright (c) 2006-2022, RT-Thread Development Team * * SPDX-License-Identifier: Apache-2.0 * * Change Logs: * Date Author Notes * 2009-09-22 Bernard add board.h to this bsp * 2018-09-02 xuzhuoyi modify for TMS320F28379D version * 2022-06-21 guyunjie fix bugs in trap_rtosint and enable interrupt nesting */ #include #include "board.h" #include "drv_sci.h" #include "F28x_Project.h" #ifndef RT_USING_SMP extern volatile rt_uint8_t rt_interrupt_nest; #endif extern rt_uint32_t rt_thread_switch_interrupt_flag; extern interrupt void RTOSINT_Handler(); void trap_rtosint() { if(rt_thread_switch_interrupt_flag) { /* only do pendsv at the end of the last level of interrupt nesting, * so that threads do not preempt any isrs. */ if(rt_interrupt_nest == 1) { /* rt_interrupt_leave_hook is called before rt_interrupt_nest -- * in rt_interrupt_leave. We need to do this manually here to indicate * that all isrs have been cleared before we switch to thread. */ rt_interrupt_nest --; asm(" trap #16"); /* increment rt_interrupt_nest to compensate for the previous decrement. */ rt_interrupt_nest ++; } } } /** * This is the timer interrupt service routine. * */ interrupt void cpu_timer2_isr(void) { CpuTimer2Regs.TCR.all = 0xC000; ALLOW_ISR_PREEMPT(); /* enter interrupt */ rt_interrupt_enter(); rt_tick_increase(); /* leave interrupt */ rt_interrupt_leave(); } /** * This function will initial TMS320F28379D board. */ void rt_hw_board_init() { /* Configure the system clock @ 84 Mhz */ InitSysCtrl(); DINT; InitPieCtrl(); IER = 0x0000; IFR = 0x0000; InitPieVectTable(); EALLOW; // This is needed to write to EALLOW protected registers PieVectTable.TIMER2_INT = &cpu_timer2_isr; PieVectTable.RTOS_INT = &RTOSINT_Handler; EDIS; InitCpuTimers(); ConfigCpuTimer(&CpuTimer2, 200, 1000000 / RT_TICK_PER_SECOND); CpuTimer2Regs.TCR.all = 0x4000; IER |= M_INT14; #ifdef RT_USING_HEAP rt_system_heap_init((void *)HEAP_BEGIN, (void *)HEAP_END); #endif rt_hw_sci_init(); #ifdef RT_USING_COMPONENTS_INIT rt_components_board_init(); #endif #if defined(RT_USING_CONSOLE) && defined(RT_USING_DEVICE) rt_console_set_device(RT_CONSOLE_DEVICE_NAME); #endif /*this hook may cause problem for reasons unknown*/ rt_interrupt_leave_sethook((void (*)(void))trap_rtosint); }