//***************************************************************************** // // am_reg_pwrctrl.h //! @file //! //! @brief Register macros for the PWRCTRL module // //***************************************************************************** //***************************************************************************** // // Copyright (c) 2017, Ambiq Micro // All rights reserved. // // Redistribution and use in source and binary forms, with or without // modification, are permitted provided that the following conditions are met: // // 1. Redistributions of source code must retain the above copyright notice, // this list of conditions and the following disclaimer. // // 2. Redistributions in binary form must reproduce the above copyright // notice, this list of conditions and the following disclaimer in the // documentation and/or other materials provided with the distribution. // // 3. Neither the name of the copyright holder nor the names of its // contributors may be used to endorse or promote products derived from this // software without specific prior written permission. // // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" // AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE // IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE // ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE // LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF // SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS // INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN // CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) // ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE // POSSIBILITY OF SUCH DAMAGE. // // This is part of revision 1.2.11 of the AmbiqSuite Development Package. // //***************************************************************************** #ifndef AM_REG_PWRCTRL_H #define AM_REG_PWRCTRL_H //***************************************************************************** // // Instance finder. (1 instance(s) available) // //***************************************************************************** #define AM_REG_PWRCTRL_NUM_MODULES 1 #define AM_REG_PWRCTRLn(n) \ (REG_PWRCTRL_BASEADDR + 0x00000000 * n) //***************************************************************************** // // Register offsets. // //***************************************************************************** #define AM_REG_PWRCTRL_SUPPLYSRC_O 0x00000000 #define AM_REG_PWRCTRL_POWERSTATUS_O 0x00000004 #define AM_REG_PWRCTRL_DEVICEEN_O 0x00000008 #define AM_REG_PWRCTRL_SRAMPWDINSLEEP_O 0x0000000C #define AM_REG_PWRCTRL_MEMEN_O 0x00000010 #define AM_REG_PWRCTRL_PWRONSTATUS_O 0x00000014 #define AM_REG_PWRCTRL_SRAMCTRL_O 0x00000018 #define AM_REG_PWRCTRL_ADCSTATUS_O 0x0000001C #define AM_REG_PWRCTRL_MISCOPT_O 0x00000020 //***************************************************************************** // // PWRCTRL_SUPPLYSRC - Memory and Core Voltage Supply Source Select Register // //***************************************************************************** // Switches the CORE DOMAIN from BUCK mode (if enabled) to LDO when CPU is in // DEEP SLEEP. If all the devices are off then this does not matter and LDO (low // power mode) is used #define AM_REG_PWRCTRL_SUPPLYSRC_SWITCH_LDO_IN_SLEEP_S 2 #define AM_REG_PWRCTRL_SUPPLYSRC_SWITCH_LDO_IN_SLEEP_M 0x00000004 #define AM_REG_PWRCTRL_SUPPLYSRC_SWITCH_LDO_IN_SLEEP(n) (((uint32_t)(n) << 2) & 0x00000004) #define AM_REG_PWRCTRL_SUPPLYSRC_SWITCH_LDO_IN_SLEEP_EN 0x00000004 // Enables and Selects the Core Buck as the supply for the low-voltage power // domain. #define AM_REG_PWRCTRL_SUPPLYSRC_COREBUCKEN_S 1 #define AM_REG_PWRCTRL_SUPPLYSRC_COREBUCKEN_M 0x00000002 #define AM_REG_PWRCTRL_SUPPLYSRC_COREBUCKEN(n) (((uint32_t)(n) << 1) & 0x00000002) #define AM_REG_PWRCTRL_SUPPLYSRC_COREBUCKEN_EN 0x00000002 // Enables and select the Memory Buck as the supply for the Flash and SRAM power // domain. #define AM_REG_PWRCTRL_SUPPLYSRC_MEMBUCKEN_S 0 #define AM_REG_PWRCTRL_SUPPLYSRC_MEMBUCKEN_M 0x00000001 #define AM_REG_PWRCTRL_SUPPLYSRC_MEMBUCKEN(n) (((uint32_t)(n) << 0) & 0x00000001) #define AM_REG_PWRCTRL_SUPPLYSRC_MEMBUCKEN_EN 0x00000001 //***************************************************************************** // // PWRCTRL_POWERSTATUS - Power Status Register for MCU supplies and peripherals // //***************************************************************************** // Indicates whether the Core low-voltage domain is supplied from the LDO or the // Buck. #define AM_REG_PWRCTRL_POWERSTATUS_COREBUCKON_S 1 #define AM_REG_PWRCTRL_POWERSTATUS_COREBUCKON_M 0x00000002 #define AM_REG_PWRCTRL_POWERSTATUS_COREBUCKON(n) (((uint32_t)(n) << 1) & 0x00000002) #define AM_REG_PWRCTRL_POWERSTATUS_COREBUCKON_LDO 0x00000000 #define AM_REG_PWRCTRL_POWERSTATUS_COREBUCKON_BUCK 0x00000002 // Indicate whether the Memory power domain is supplied from the LDO or the // Buck. #define AM_REG_PWRCTRL_POWERSTATUS_MEMBUCKON_S 0 #define AM_REG_PWRCTRL_POWERSTATUS_MEMBUCKON_M 0x00000001 #define AM_REG_PWRCTRL_POWERSTATUS_MEMBUCKON(n) (((uint32_t)(n) << 0) & 0x00000001) #define AM_REG_PWRCTRL_POWERSTATUS_MEMBUCKON_LDO 0x00000000 #define AM_REG_PWRCTRL_POWERSTATUS_MEMBUCKON_BUCK 0x00000001 //***************************************************************************** // // PWRCTRL_DEVICEEN - DEVICE ENABLES for SHELBY // //***************************************************************************** // Enable PDM Digital Block #define AM_REG_PWRCTRL_DEVICEEN_PDM_S 10 #define AM_REG_PWRCTRL_DEVICEEN_PDM_M 0x00000400 #define AM_REG_PWRCTRL_DEVICEEN_PDM(n) (((uint32_t)(n) << 10) & 0x00000400) #define AM_REG_PWRCTRL_DEVICEEN_PDM_EN 0x00000400 #define AM_REG_PWRCTRL_DEVICEEN_PDM_DIS 0x00000000 // Enable ADC Digital Block #define AM_REG_PWRCTRL_DEVICEEN_ADC_S 9 #define AM_REG_PWRCTRL_DEVICEEN_ADC_M 0x00000200 #define AM_REG_PWRCTRL_DEVICEEN_ADC(n) (((uint32_t)(n) << 9) & 0x00000200) #define AM_REG_PWRCTRL_DEVICEEN_ADC_EN 0x00000200 #define AM_REG_PWRCTRL_DEVICEEN_ADC_DIS 0x00000000 // Enable UART 1 #define AM_REG_PWRCTRL_DEVICEEN_UART1_S 8 #define AM_REG_PWRCTRL_DEVICEEN_UART1_M 0x00000100 #define AM_REG_PWRCTRL_DEVICEEN_UART1(n) (((uint32_t)(n) << 8) & 0x00000100) #define AM_REG_PWRCTRL_DEVICEEN_UART1_EN 0x00000100 #define AM_REG_PWRCTRL_DEVICEEN_UART1_DIS 0x00000000 // Enable UART 0 #define AM_REG_PWRCTRL_DEVICEEN_UART0_S 7 #define AM_REG_PWRCTRL_DEVICEEN_UART0_M 0x00000080 #define AM_REG_PWRCTRL_DEVICEEN_UART0(n) (((uint32_t)(n) << 7) & 0x00000080) #define AM_REG_PWRCTRL_DEVICEEN_UART0_EN 0x00000080 #define AM_REG_PWRCTRL_DEVICEEN_UART0_DIS 0x00000000 // Enable IO MASTER 5 #define AM_REG_PWRCTRL_DEVICEEN_IO_MASTER5_S 6 #define AM_REG_PWRCTRL_DEVICEEN_IO_MASTER5_M 0x00000040 #define AM_REG_PWRCTRL_DEVICEEN_IO_MASTER5(n) (((uint32_t)(n) << 6) & 0x00000040) #define AM_REG_PWRCTRL_DEVICEEN_IO_MASTER5_EN 0x00000040 #define AM_REG_PWRCTRL_DEVICEEN_IO_MASTER5_DIS 0x00000000 // Enable IO MASTER 4 #define AM_REG_PWRCTRL_DEVICEEN_IO_MASTER4_S 5 #define AM_REG_PWRCTRL_DEVICEEN_IO_MASTER4_M 0x00000020 #define AM_REG_PWRCTRL_DEVICEEN_IO_MASTER4(n) (((uint32_t)(n) << 5) & 0x00000020) #define AM_REG_PWRCTRL_DEVICEEN_IO_MASTER4_EN 0x00000020 #define AM_REG_PWRCTRL_DEVICEEN_IO_MASTER4_DIS 0x00000000 // Enable IO MASTER 3 #define AM_REG_PWRCTRL_DEVICEEN_IO_MASTER3_S 4 #define AM_REG_PWRCTRL_DEVICEEN_IO_MASTER3_M 0x00000010 #define AM_REG_PWRCTRL_DEVICEEN_IO_MASTER3(n) (((uint32_t)(n) << 4) & 0x00000010) #define AM_REG_PWRCTRL_DEVICEEN_IO_MASTER3_EN 0x00000010 #define AM_REG_PWRCTRL_DEVICEEN_IO_MASTER3_DIS 0x00000000 // Enable IO MASTER 2 #define AM_REG_PWRCTRL_DEVICEEN_IO_MASTER2_S 3 #define AM_REG_PWRCTRL_DEVICEEN_IO_MASTER2_M 0x00000008 #define AM_REG_PWRCTRL_DEVICEEN_IO_MASTER2(n) (((uint32_t)(n) << 3) & 0x00000008) #define AM_REG_PWRCTRL_DEVICEEN_IO_MASTER2_EN 0x00000008 #define AM_REG_PWRCTRL_DEVICEEN_IO_MASTER2_DIS 0x00000000 // Enable IO MASTER 1 #define AM_REG_PWRCTRL_DEVICEEN_IO_MASTER1_S 2 #define AM_REG_PWRCTRL_DEVICEEN_IO_MASTER1_M 0x00000004 #define AM_REG_PWRCTRL_DEVICEEN_IO_MASTER1(n) (((uint32_t)(n) << 2) & 0x00000004) #define AM_REG_PWRCTRL_DEVICEEN_IO_MASTER1_EN 0x00000004 #define AM_REG_PWRCTRL_DEVICEEN_IO_MASTER1_DIS 0x00000000 // Enable IO MASTER 0 #define AM_REG_PWRCTRL_DEVICEEN_IO_MASTER0_S 1 #define AM_REG_PWRCTRL_DEVICEEN_IO_MASTER0_M 0x00000002 #define AM_REG_PWRCTRL_DEVICEEN_IO_MASTER0(n) (((uint32_t)(n) << 1) & 0x00000002) #define AM_REG_PWRCTRL_DEVICEEN_IO_MASTER0_EN 0x00000002 #define AM_REG_PWRCTRL_DEVICEEN_IO_MASTER0_DIS 0x00000000 // Enable IO SLAVE #define AM_REG_PWRCTRL_DEVICEEN_IO_SLAVE_S 0 #define AM_REG_PWRCTRL_DEVICEEN_IO_SLAVE_M 0x00000001 #define AM_REG_PWRCTRL_DEVICEEN_IO_SLAVE(n) (((uint32_t)(n) << 0) & 0x00000001) #define AM_REG_PWRCTRL_DEVICEEN_IO_SLAVE_EN 0x00000001 #define AM_REG_PWRCTRL_DEVICEEN_IO_SLAVE_DIS 0x00000000 //***************************************************************************** // // PWRCTRL_SRAMPWDINSLEEP - Powerdown an SRAM Banks in Deep Sleep mode // //***************************************************************************** // Enable CACHE BANKS to power down in deep sleep #define AM_REG_PWRCTRL_SRAMPWDINSLEEP_CACHE_PWD_SLP_S 31 #define AM_REG_PWRCTRL_SRAMPWDINSLEEP_CACHE_PWD_SLP_M 0x80000000 #define AM_REG_PWRCTRL_SRAMPWDINSLEEP_CACHE_PWD_SLP(n) (((uint32_t)(n) << 31) & 0x80000000) #define AM_REG_PWRCTRL_SRAMPWDINSLEEP_CACHE_PWD_SLP_EN 0x80000000 #define AM_REG_PWRCTRL_SRAMPWDINSLEEP_CACHE_PWD_SLP_DIS 0x00000000 // Selects which SRAM banks are powered down in deep sleep mode, causing the // contents of the bank to be lost. #define AM_REG_PWRCTRL_SRAMPWDINSLEEP_SRAMSLEEPPOWERDOWN_S 0 #define AM_REG_PWRCTRL_SRAMPWDINSLEEP_SRAMSLEEPPOWERDOWN_M 0x000007FF #define AM_REG_PWRCTRL_SRAMPWDINSLEEP_SRAMSLEEPPOWERDOWN(n) (((uint32_t)(n) << 0) & 0x000007FF) #define AM_REG_PWRCTRL_SRAMPWDINSLEEP_SRAMSLEEPPOWERDOWN_NONE 0x00000000 #define AM_REG_PWRCTRL_SRAMPWDINSLEEP_SRAMSLEEPPOWERDOWN_GROUP0_SRAM0 0x00000001 #define AM_REG_PWRCTRL_SRAMPWDINSLEEP_SRAMSLEEPPOWERDOWN_GROUP0_SRAM1 0x00000002 #define AM_REG_PWRCTRL_SRAMPWDINSLEEP_SRAMSLEEPPOWERDOWN_GROUP0_SRAM2 0x00000004 #define AM_REG_PWRCTRL_SRAMPWDINSLEEP_SRAMSLEEPPOWERDOWN_GROUP0_SRAM3 0x00000008 #define AM_REG_PWRCTRL_SRAMPWDINSLEEP_SRAMSLEEPPOWERDOWN_GROUP1 0x00000010 #define AM_REG_PWRCTRL_SRAMPWDINSLEEP_SRAMSLEEPPOWERDOWN_GROUP2 0x00000020 #define AM_REG_PWRCTRL_SRAMPWDINSLEEP_SRAMSLEEPPOWERDOWN_GROUP3 0x00000040 #define AM_REG_PWRCTRL_SRAMPWDINSLEEP_SRAMSLEEPPOWERDOWN_GROUP4 0x00000080 #define AM_REG_PWRCTRL_SRAMPWDINSLEEP_SRAMSLEEPPOWERDOWN_GROUP5 0x00000100 #define AM_REG_PWRCTRL_SRAMPWDINSLEEP_SRAMSLEEPPOWERDOWN_GROUP6 0x00000200 #define AM_REG_PWRCTRL_SRAMPWDINSLEEP_SRAMSLEEPPOWERDOWN_GROUP7 0x00000400 #define AM_REG_PWRCTRL_SRAMPWDINSLEEP_SRAMSLEEPPOWERDOWN_SRAM8K 0x00000001 #define AM_REG_PWRCTRL_SRAMPWDINSLEEP_SRAMSLEEPPOWERDOWN_SRAM16K 0x00000003 #define AM_REG_PWRCTRL_SRAMPWDINSLEEP_SRAMSLEEPPOWERDOWN_SRAM32K 0x0000000F #define AM_REG_PWRCTRL_SRAMPWDINSLEEP_SRAMSLEEPPOWERDOWN_SRAM64K 0x0000001F #define AM_REG_PWRCTRL_SRAMPWDINSLEEP_SRAMSLEEPPOWERDOWN_SRAM128K 0x0000007F #define AM_REG_PWRCTRL_SRAMPWDINSLEEP_SRAMSLEEPPOWERDOWN_ALLBUTLOWER8K 0x000007FE #define AM_REG_PWRCTRL_SRAMPWDINSLEEP_SRAMSLEEPPOWERDOWN_ALLBUTLOWER16K 0x000007FC #define AM_REG_PWRCTRL_SRAMPWDINSLEEP_SRAMSLEEPPOWERDOWN_ALLBUTLOWER24K 0x000007F8 #define AM_REG_PWRCTRL_SRAMPWDINSLEEP_SRAMSLEEPPOWERDOWN_ALLBUTLOWER32K 0x000007F0 #define AM_REG_PWRCTRL_SRAMPWDINSLEEP_SRAMSLEEPPOWERDOWN_ALLBUTLOWER64K 0x000007E0 #define AM_REG_PWRCTRL_SRAMPWDINSLEEP_SRAMSLEEPPOWERDOWN_ALLBUTLOWER128K 0x00000780 #define AM_REG_PWRCTRL_SRAMPWDINSLEEP_SRAMSLEEPPOWERDOWN_ALL 0x000007FF //***************************************************************************** // // PWRCTRL_MEMEN - Disables individual banks of the MEMORY array // //***************************************************************************** // Enable CACHE BANK 2 #define AM_REG_PWRCTRL_MEMEN_CACHEB2_S 31 #define AM_REG_PWRCTRL_MEMEN_CACHEB2_M 0x80000000 #define AM_REG_PWRCTRL_MEMEN_CACHEB2(n) (((uint32_t)(n) << 31) & 0x80000000) #define AM_REG_PWRCTRL_MEMEN_CACHEB2_EN 0x80000000 #define AM_REG_PWRCTRL_MEMEN_CACHEB2_DIS 0x00000000 // Enable CACHE BANK 0 #define AM_REG_PWRCTRL_MEMEN_CACHEB0_S 29 #define AM_REG_PWRCTRL_MEMEN_CACHEB0_M 0x20000000 #define AM_REG_PWRCTRL_MEMEN_CACHEB0(n) (((uint32_t)(n) << 29) & 0x20000000) #define AM_REG_PWRCTRL_MEMEN_CACHEB0_EN 0x20000000 #define AM_REG_PWRCTRL_MEMEN_CACHEB0_DIS 0x00000000 // Enable FLASH1 #define AM_REG_PWRCTRL_MEMEN_FLASH1_S 12 #define AM_REG_PWRCTRL_MEMEN_FLASH1_M 0x00001000 #define AM_REG_PWRCTRL_MEMEN_FLASH1(n) (((uint32_t)(n) << 12) & 0x00001000) #define AM_REG_PWRCTRL_MEMEN_FLASH1_EN 0x00001000 #define AM_REG_PWRCTRL_MEMEN_FLASH1_DIS 0x00000000 // Enable FLASH 0 #define AM_REG_PWRCTRL_MEMEN_FLASH0_S 11 #define AM_REG_PWRCTRL_MEMEN_FLASH0_M 0x00000800 #define AM_REG_PWRCTRL_MEMEN_FLASH0(n) (((uint32_t)(n) << 11) & 0x00000800) #define AM_REG_PWRCTRL_MEMEN_FLASH0_EN 0x00000800 #define AM_REG_PWRCTRL_MEMEN_FLASH0_DIS 0x00000000 // Enables power for selected SRAM banks (else an access to its address space to // generate a Hard Fault). #define AM_REG_PWRCTRL_MEMEN_SRAMEN_S 0 #define AM_REG_PWRCTRL_MEMEN_SRAMEN_M 0x000007FF #define AM_REG_PWRCTRL_MEMEN_SRAMEN(n) (((uint32_t)(n) << 0) & 0x000007FF) #define AM_REG_PWRCTRL_MEMEN_SRAMEN_NONE 0x00000000 #define AM_REG_PWRCTRL_MEMEN_SRAMEN_GROUP0_SRAM0 0x00000001 #define AM_REG_PWRCTRL_MEMEN_SRAMEN_GROUP0_SRAM1 0x00000002 #define AM_REG_PWRCTRL_MEMEN_SRAMEN_GROUP0_SRAM2 0x00000004 #define AM_REG_PWRCTRL_MEMEN_SRAMEN_GROUP0_SRAM3 0x00000008 #define AM_REG_PWRCTRL_MEMEN_SRAMEN_GROUP1 0x00000010 #define AM_REG_PWRCTRL_MEMEN_SRAMEN_GROUP2 0x00000020 #define AM_REG_PWRCTRL_MEMEN_SRAMEN_GROUP3 0x00000040 #define AM_REG_PWRCTRL_MEMEN_SRAMEN_GROUP4 0x00000080 #define AM_REG_PWRCTRL_MEMEN_SRAMEN_GROUP5 0x00000100 #define AM_REG_PWRCTRL_MEMEN_SRAMEN_GROUP6 0x00000200 #define AM_REG_PWRCTRL_MEMEN_SRAMEN_GROUP7 0x00000400 #define AM_REG_PWRCTRL_MEMEN_SRAMEN_SRAM8K 0x00000001 #define AM_REG_PWRCTRL_MEMEN_SRAMEN_SRAM16K 0x00000003 #define AM_REG_PWRCTRL_MEMEN_SRAMEN_SRAM32K 0x0000000F #define AM_REG_PWRCTRL_MEMEN_SRAMEN_SRAM64K 0x0000001F #define AM_REG_PWRCTRL_MEMEN_SRAMEN_SRAM128K 0x0000007F #define AM_REG_PWRCTRL_MEMEN_SRAMEN_SRAM256K 0x000007FF #define AM_REG_PWRCTRL_MEMEN_SRAMEN_ALL 0x000007FF //***************************************************************************** // // PWRCTRL_PWRONSTATUS - POWER ON Status // //***************************************************************************** // This bit is 1 if power is supplied to CACHE BANK 2 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_CACHEB2_S 21 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_CACHEB2_M 0x00200000 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_CACHEB2(n) (((uint32_t)(n) << 21) & 0x00200000) // This bit is 1 if power is supplied to CACHE BANK 0 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_CACHEB0_S 19 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_CACHEB0_M 0x00080000 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_CACHEB0(n) (((uint32_t)(n) << 19) & 0x00080000) // This bit is 1 if power is supplied to SRAM domain PD_GRP7 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP7_SRAM_S 18 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP7_SRAM_M 0x00040000 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP7_SRAM(n) (((uint32_t)(n) << 18) & 0x00040000) // This bit is 1 if power is supplied to SRAM domain PD_GRP6 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP6_SRAM_S 17 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP6_SRAM_M 0x00020000 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP6_SRAM(n) (((uint32_t)(n) << 17) & 0x00020000) // This bit is 1 if power is supplied to SRAM domain PD_GRP5 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP5_SRAM_S 16 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP5_SRAM_M 0x00010000 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP5_SRAM(n) (((uint32_t)(n) << 16) & 0x00010000) // This bit is 1 if power is supplied to SRAM domain PD_GRP4 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP4_SRAM_S 15 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP4_SRAM_M 0x00008000 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP4_SRAM(n) (((uint32_t)(n) << 15) & 0x00008000) // This bit is 1 if power is supplied to SRAM domain PD_GRP3 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP3_SRAM_S 14 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP3_SRAM_M 0x00004000 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP3_SRAM(n) (((uint32_t)(n) << 14) & 0x00004000) // This bit is 1 if power is supplied to SRAM domain PD_GRP2 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP2_SRAM_S 13 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP2_SRAM_M 0x00002000 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP2_SRAM(n) (((uint32_t)(n) << 13) & 0x00002000) // This bit is 1 if power is supplied to SRAM domain PD_GRP1 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP1_SRAM_S 12 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP1_SRAM_M 0x00001000 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP1_SRAM(n) (((uint32_t)(n) << 12) & 0x00001000) // This bit is 1 if power is supplied to SRAM domain PD_SRAM0_3 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM3_S 11 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM3_M 0x00000800 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM3(n) (((uint32_t)(n) << 11) & 0x00000800) // This bit is 1 if power is supplied to SRAM domain PD_SRAM0_2 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM2_S 10 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM2_M 0x00000400 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM2(n) (((uint32_t)(n) << 10) & 0x00000400) // This bit is 1 if power is supplied to SRAM domain SRAM0_1 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM1_S 9 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM1_M 0x00000200 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM1(n) (((uint32_t)(n) << 9) & 0x00000200) // This bit is 1 if power is supplied to SRAM domain SRAM0_0 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM0_S 8 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM0_M 0x00000100 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_GRP0_SRAM0(n) (((uint32_t)(n) << 8) & 0x00000100) // This bit is 1 if power is supplied to domain PD_ADC #define AM_REG_PWRCTRL_PWRONSTATUS_PDADC_S 7 #define AM_REG_PWRCTRL_PWRONSTATUS_PDADC_M 0x00000080 #define AM_REG_PWRCTRL_PWRONSTATUS_PDADC(n) (((uint32_t)(n) << 7) & 0x00000080) // This bit is 1 if power is supplied to domain PD_FLAM1 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_FLAM1_S 6 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_FLAM1_M 0x00000040 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_FLAM1(n) (((uint32_t)(n) << 6) & 0x00000040) // This bit is 1 if power is supplied to domain PD_FLAM0 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_FLAM0_S 5 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_FLAM0_M 0x00000020 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_FLAM0(n) (((uint32_t)(n) << 5) & 0x00000020) // This bit is 1 if power is supplied to domain PD_PDM #define AM_REG_PWRCTRL_PWRONSTATUS_PD_PDM_S 4 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_PDM_M 0x00000010 #define AM_REG_PWRCTRL_PWRONSTATUS_PD_PDM(n) (((uint32_t)(n) << 4) & 0x00000010) // This bit is 1 if power is supplied to power domain C, which supplies IOM3-5. #define AM_REG_PWRCTRL_PWRONSTATUS_PDC_S 3 #define AM_REG_PWRCTRL_PWRONSTATUS_PDC_M 0x00000008 #define AM_REG_PWRCTRL_PWRONSTATUS_PDC(n) (((uint32_t)(n) << 3) & 0x00000008) // This bit is 1 if power is supplied to power domain B, which supplies IOM0-2. #define AM_REG_PWRCTRL_PWRONSTATUS_PDB_S 2 #define AM_REG_PWRCTRL_PWRONSTATUS_PDB_M 0x00000004 #define AM_REG_PWRCTRL_PWRONSTATUS_PDB(n) (((uint32_t)(n) << 2) & 0x00000004) // This bit is 1 if power is supplied to power domain A, which supplies IOS and // UART0,1. #define AM_REG_PWRCTRL_PWRONSTATUS_PDA_S 1 #define AM_REG_PWRCTRL_PWRONSTATUS_PDA_M 0x00000002 #define AM_REG_PWRCTRL_PWRONSTATUS_PDA(n) (((uint32_t)(n) << 1) & 0x00000002) //***************************************************************************** // // PWRCTRL_SRAMCTRL - SRAM Control register // //***************************************************************************** // Enables top-level clock gating in the SRAM block. This bit should be enabled // for lowest power operation. #define AM_REG_PWRCTRL_SRAMCTRL_SRAM_MASTER_CLKGATE_S 2 #define AM_REG_PWRCTRL_SRAMCTRL_SRAM_MASTER_CLKGATE_M 0x00000004 #define AM_REG_PWRCTRL_SRAMCTRL_SRAM_MASTER_CLKGATE(n) (((uint32_t)(n) << 2) & 0x00000004) #define AM_REG_PWRCTRL_SRAMCTRL_SRAM_MASTER_CLKGATE_EN 0x00000004 #define AM_REG_PWRCTRL_SRAMCTRL_SRAM_MASTER_CLKGATE_DIS 0x00000000 // Enables individual per-RAM clock gating in the SRAM block. This bit should // be enabled for lowest power operation. #define AM_REG_PWRCTRL_SRAMCTRL_SRAM_CLKGATE_S 1 #define AM_REG_PWRCTRL_SRAMCTRL_SRAM_CLKGATE_M 0x00000002 #define AM_REG_PWRCTRL_SRAMCTRL_SRAM_CLKGATE(n) (((uint32_t)(n) << 1) & 0x00000002) #define AM_REG_PWRCTRL_SRAMCTRL_SRAM_CLKGATE_EN 0x00000002 #define AM_REG_PWRCTRL_SRAMCTRL_SRAM_CLKGATE_DIS 0x00000000 // Enable LS (light sleep) of cache RAMs. When this bit is set, the RAMS will // be put into light sleep mode while inactive. NOTE: if the SRAM is actively // used, this may have an adverse affect on power since entering/exiting LS mode // may consume more power than would be saved. #define AM_REG_PWRCTRL_SRAMCTRL_SRAM_LIGHT_SLEEP_S 0 #define AM_REG_PWRCTRL_SRAMCTRL_SRAM_LIGHT_SLEEP_M 0x00000001 #define AM_REG_PWRCTRL_SRAMCTRL_SRAM_LIGHT_SLEEP(n) (((uint32_t)(n) << 0) & 0x00000001) #define AM_REG_PWRCTRL_SRAMCTRL_SRAM_LIGHT_SLEEP_EN 0x00000001 #define AM_REG_PWRCTRL_SRAMCTRL_SRAM_LIGHT_SLEEP_DIS 0x00000000 //***************************************************************************** // // PWRCTRL_ADCSTATUS - Power Status Register for ADC Block // //***************************************************************************** // This bit indicates that the ADC REFBUF is powered down #define AM_REG_PWRCTRL_ADCSTATUS_ADC_REFBUF_PWD_S 5 #define AM_REG_PWRCTRL_ADCSTATUS_ADC_REFBUF_PWD_M 0x00000020 #define AM_REG_PWRCTRL_ADCSTATUS_ADC_REFBUF_PWD(n) (((uint32_t)(n) << 5) & 0x00000020) // This bit indicates that the ADC REFKEEP is powered down #define AM_REG_PWRCTRL_ADCSTATUS_ADC_REFKEEP_PWD_S 4 #define AM_REG_PWRCTRL_ADCSTATUS_ADC_REFKEEP_PWD_M 0x00000010 #define AM_REG_PWRCTRL_ADCSTATUS_ADC_REFKEEP_PWD(n) (((uint32_t)(n) << 4) & 0x00000010) // This bit indicates that the ADC VBAT resistor divider is powered down #define AM_REG_PWRCTRL_ADCSTATUS_ADC_VBAT_PWD_S 3 #define AM_REG_PWRCTRL_ADCSTATUS_ADC_VBAT_PWD_M 0x00000008 #define AM_REG_PWRCTRL_ADCSTATUS_ADC_VBAT_PWD(n) (((uint32_t)(n) << 3) & 0x00000008) // This bit indicates that the ADC temperature sensor input buffer is powered // down #define AM_REG_PWRCTRL_ADCSTATUS_ADC_VPTAT_PWD_S 2 #define AM_REG_PWRCTRL_ADCSTATUS_ADC_VPTAT_PWD_M 0x00000004 #define AM_REG_PWRCTRL_ADCSTATUS_ADC_VPTAT_PWD(n) (((uint32_t)(n) << 2) & 0x00000004) // This bit indicates that the ADC Band Gap is powered down #define AM_REG_PWRCTRL_ADCSTATUS_ADC_BGT_PWD_S 1 #define AM_REG_PWRCTRL_ADCSTATUS_ADC_BGT_PWD_M 0x00000002 #define AM_REG_PWRCTRL_ADCSTATUS_ADC_BGT_PWD(n) (((uint32_t)(n) << 1) & 0x00000002) // This bit indicates that the ADC is powered down #define AM_REG_PWRCTRL_ADCSTATUS_ADC_PWD_S 0 #define AM_REG_PWRCTRL_ADCSTATUS_ADC_PWD_M 0x00000001 #define AM_REG_PWRCTRL_ADCSTATUS_ADC_PWD(n) (((uint32_t)(n) << 0) & 0x00000001) //***************************************************************************** // // PWRCTRL_MISCOPT - Power Optimization Control Bits // //***************************************************************************** // Setting this bit will enable the MEM LDO to be in LPMODE during deep sleep // even when the ctimers or stimers are running #define AM_REG_PWRCTRL_MISCOPT_DIS_LDOLPMODE_TIMERS_S 2 #define AM_REG_PWRCTRL_MISCOPT_DIS_LDOLPMODE_TIMERS_M 0x00000004 #define AM_REG_PWRCTRL_MISCOPT_DIS_LDOLPMODE_TIMERS(n) (((uint32_t)(n) << 2) & 0x00000004) #endif // AM_REG_PWRCTRL_H