import rtconfig
from building import *

cwd = GetCurrentDir()

# add the general drivers.
src = Glob('board.c')
src += Glob('CubeMX_Config/Src/stm32f4xx_hal_msp.c')

if GetDepend(['BSP_USING_ETH']):
    src += Glob('ports/phy_reset.c')

if GetDepend(['BSP_USING_SPI_FLASH']):
    src += Glob('ports/spi_flash_init.c')

path =  [cwd]
path += [cwd + '/CubeMX_Config/Inc']
path += [cwd + '/ports']

if rtconfig.CROSS_TOOL == 'gcc':
    src += [cwd + '/../../libraries/STM32F4xx_HAL/CMSIS/Device/ST/STM32F4xx/Source/Templates/gcc/startup_stm32f407xx.s']
elif rtconfig.CROSS_TOOL == 'keil':
    src += [cwd + '/../../libraries/STM32F4xx_HAL/CMSIS/Device/ST/STM32F4xx/Source/Templates/arm/startup_stm32f407xx.s']
elif rtconfig.CROSS_TOOL == 'iar':
    src += [cwd + '/../../libraries/STM32F4xx_HAL/CMSIS/Device/ST/STM32F4xx/Source/Templates/iar/startup_stm32f407xx.s']

CPPDEFINES = ['STM32F407xx']
group = DefineGroup('Drivers', src, depend = [''], CPPPATH = path, CPPDEFINES = CPPDEFINES)

Return('group')