/*
 * Copyright (c) 2006-2022, RT-Thread Development Team
 *
 * SPDX-License-Identifier: Apache-2.0
 *
 * Change Logs:
 * Date           Author       Notes
 * 2021-12-10     Meco Man     first version
 */
#include <Arduino.h>
#include <board.h>
#include "pins_arduino.h"

/*
    {Arduino Pin, RT-Thread Pin [, Device Name(PWM or ADC), Channel]}
    [] means optional
    Digital pins must NOT give the device name and channel.
    Analog pins MUST give the device name and channel(ADC, PWM or DAC).
    Arduino Pin must keep in sequence.
*/
const pin_map_t pin_map_table[]=
{
    {D0}, /* RX */
    {D1}, /* TX */
    {D2, GET_PIN(B,9)},
    {D3, GET_PIN(D,15), "pwm4", 4}, /* PWM */
    {D4, GET_PIN(A,8)},
    {D5, GET_PIN(D,14)},
    {D6, GET_PIN(B,11), "pwm2", 4}, /* PWM */
    {D7, GET_PIN(B,14)},
    {D8, GET_PIN(B,12)},
    {D9, GET_PIN(D,12), "pwm4", 1}, /* PWM */
    {D10, GET_PIN(B,10), "pwm2", 3}, /* PWM */
    {D11, GET_PIN(B,8), "pwm4", 3}, /* PWM */
    {D12, GET_PIN(B,15)},
    {D13, GET_PIN(B,13)},
    {D14, GET_PIN(A,1)}, /* BSP: MOTOR-A */
    {D15, GET_PIN(A,0)}, /* BSP: MOTOR-B */
    {D16, GET_PIN(B,2)}, /* BSP: BEEP */
    {D17, GET_PIN(D,10)}, /* BSP: KEY0 */
    {D18, GET_PIN(D,9)}, /* BSP: KEY1 */
    {D19, GET_PIN(D,8)}, /* BSP: KEY2 */
    {D20, GET_PIN(C,13)}, /* BSP: KEY-WKUP */
    {D21, GET_PIN(E,7)}, /* BSP: RED-LED */
    {D22, GET_PIN(E,8)}, /* LED_BUILTIN, BSP: GREEN-LED */
    {D23, GET_PIN(E,9), "pwm1", 1}, /* PWM, BSP: BLUE-LED */
    {D24, GET_PIN(B,0)}, /* INFRARED EMISSION */
    {D25, GET_PIN(B,1)}, /* INFRARED RECEPTION */
    {A0, GET_PIN(C,2), "adc1", 3}, /* ADC */
    {A1, GET_PIN(C,4), "adc1", 13}, /* ADC */
    {A2, RT_NULL, "adc1", 0}, /* ADC, On-Chip: internal reference voltage, ADC_CHANNEL_VREFINT */
    {A3, RT_NULL, "adc1", 17}, /* ADC, On-Chip: internal temperature sensor, ADC_CHANNEL_TEMPSENSOR */
    {DAC0, GET_PIN(A,4), "dac1", 1} /* DAC */
};