/*!
    \file  gd32f450z_eval.h
    \brief definitions for GD32F450_EVAL's leds, keys and COM ports hardware resources
*/

/*
    Copyright (C) 2016 GigaDevice

    2016-10-19, V1.0.0, firmware for GD32F450Z
*/

#ifndef GD32F450Z_EVAL_H
#define GD32F450Z_EVAL_H

#ifdef cplusplus
 extern "C" {
#endif

#include "gd32f4xx.h"

/* exported types */
typedef enum
{
    LED1 = 0,
    LED2 = 1,
    LED3 = 2
} led_typedef_enum;

typedef enum
{
    KEY_WAKEUP = 0,
    KEY_TAMPER = 1,
    KEY_USER = 2
} key_typedef_enum;

typedef enum
{
    KEY_MODE_GPIO = 0,
    KEY_MODE_EXTI = 1
} keymode_typedef_enum;

/* eval board low layer led */
#define LEDn                             3U

#define LED1_PIN                         GPIO_PIN_4
#define LED1_GPIO_PORT                   GPIOD
#define LED1_GPIO_CLK                    RCU_GPIOD

#define LED2_PIN                         GPIO_PIN_5
#define LED2_GPIO_PORT                   GPIOD
#define LED2_GPIO_CLK                    RCU_GPIOD

#define LED3_PIN                         GPIO_PIN_3
#define LED3_GPIO_PORT                   GPIOG
#define LED3_GPIO_CLK                    RCU_GPIOG

#define COMn                             1U
#define EVAL_COM1                        USART0
#define EVAL_COM1_CLK                    RCU_USART0

#define EVAL_COM1_TX_PIN                 GPIO_PIN_9
#define EVAL_COM1_RX_PIN                 GPIO_PIN_10

#define EVAL_COM_GPIO_PORT               GPIOA
#define EVAL_COM_GPIO_CLK                RCU_GPIOA
#define EVAL_COM_AF                      GPIO_AF_7

#define KEYn                             3U

/* tamper push-button */
#define TAMPER_KEY_PIN                   GPIO_PIN_13
#define TAMPER_KEY_GPIO_PORT             GPIOC
#define TAMPER_KEY_GPIO_CLK              RCU_GPIOC
#define TAMPER_KEY_EXTI_LINE             EXTI_13
#define TAMPER_KEY_EXTI_PORT_SOURCE      EXTI_SOURCE_GPIOC
#define TAMPER_KEY_EXTI_PIN_SOURCE       EXTI_SOURCE_PIN13
#define TAMPER_KEY_EXTI_IRQn             EXTI10_15_IRQn

/* wakeup push-button */
#define WAKEUP_KEY_PIN                   GPIO_PIN_0
#define WAKEUP_KEY_GPIO_PORT             GPIOA
#define WAKEUP_KEY_GPIO_CLK              RCU_GPIOA
#define WAKEUP_KEY_EXTI_LINE             EXTI_0
#define WAKEUP_KEY_EXTI_PORT_SOURCE      EXTI_SOURCE_GPIOA
#define WAKEUP_KEY_EXTI_PIN_SOURCE       EXTI_SOURCE_PIN0
#define WAKEUP_KEY_EXTI_IRQn             EXTI0_IRQn

/* user push-button */
#define USER_KEY_PIN                     GPIO_PIN_14
#define USER_KEY_GPIO_PORT               GPIOB
#define USER_KEY_GPIO_CLK                RCU_GPIOB
#define USER_KEY_EXTI_LINE               EXTI_14
#define USER_KEY_EXTI_PORT_SOURCE        EXTI_SOURCE_GPIOB
#define USER_KEY_EXTI_PIN_SOURCE         EXTI_SOURCE_PIN14
#define USER_KEY_EXTI_IRQn               EXTI10_15_IRQn

/* function declarations */
/* configures led GPIO */
void gd_eval_led_init(led_typedef_enum lednum);
/* turn on selected led */
void gd_eval_led_on(led_typedef_enum lednum);
/* turn off selected led */
void gd_eval_led_off(led_typedef_enum lednum);
/* toggle the selected led */
void gd_eval_led_toggle(led_typedef_enum lednum);
/* configure key */
void gd_eval_key_init(key_typedef_enum key_num, keymode_typedef_enum key_mode);
/* return the selected button state */
uint8_t gd_eval_key_state_get(key_typedef_enum button);
/* configure COM port */
void gd_eval_com_init(uint32_t com);


#ifdef cplusplus
}
#endif

#endif /* GD32F450Z_EVAL_H */