//***************************************************************************** // // am_hal_mcuctrl.c //! @file //! //! @brief Functions for interfacing with the MCUCTRL. //! //! @addtogroup mcuctrl2 MCU Control (MCUCTRL) //! @ingroup apollo2hal //! @{ // //***************************************************************************** //***************************************************************************** // // Copyright (c) 2017, Ambiq Micro // All rights reserved. // // Redistribution and use in source and binary forms, with or without // modification, are permitted provided that the following conditions are met: // // 1. Redistributions of source code must retain the above copyright notice, // this list of conditions and the following disclaimer. // // 2. Redistributions in binary form must reproduce the above copyright // notice, this list of conditions and the following disclaimer in the // documentation and/or other materials provided with the distribution. // // 3. Neither the name of the copyright holder nor the names of its // contributors may be used to endorse or promote products derived from this // software without specific prior written permission. // // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" // AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE // IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE // ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE // LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF // SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS // INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN // CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) // ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE // POSSIBILITY OF SUCH DAMAGE. // // This is part of revision 1.2.11 of the AmbiqSuite Development Package. // //***************************************************************************** #include #include #include "am_mcu_apollo.h" #define LDO_TRIM_REG_ADDR (0x50023004) #define BUCK_TRIM_REG_ADDR (0x50023000) //***************************************************************************** // // Global Variables. // //***************************************************************************** // // Define the flash sizes from CHIP_INFO. // const uint32_t g_am_hal_mcuctrl_flash_size[16] = { 16 * 1024, /* 0x0 0x00004000 16 KB */ 32 * 1024, /* 0x1 0x00008000 32 KB */ 64 * 1024, /* 0x2 0x00010000 64 KB */ 128 * 1024, /* 0x3 0x00020000 128 KB */ 256 * 1024, /* 0x4 0x00040000 256 KB */ 512 * 1024, /* 0x5 0x00080000 512 KB */ 1 * 1024 * 1024, /* 0x6 0x00100000 1 MB */ 2 * 1024 * 1024, /* 0x7 0x00200000 2 MB */ 4 * 1024 * 1024, /* 0x8 0x00400000 4 MB */ 8 * 1024 * 1024, /* 0x9 0x00800000 8 MB */ 16 * 1024 * 1024, /* 0xA 0x01000000 16 MB */ 32 * 1024 * 1024, /* 0xB 0x02000000 32 MB */ 64 * 1024 * 1024, /* 0xC 0x04000000 64 MB */ 128 * 1024 * 1024, /* 0xD 0x08000000 128 MB */ 256 * 1024 * 1024, /* 0xE 0x10000000 256 MB */ 512 * 1024 * 1024 /* 0xF 0x20000000 512 MB */ }; // // Define the SRAM sizes from CHIP_INFO. // For Apollo2, the SRAM sizes are defined exactly the same as the flash sizes. // #define g_am_hal_mcuctrl_sram_size g_am_hal_mcuctrl_flash_size //***************************************************************************** // //! @brief Gets all relevant device information. //! //! @param psDevice is a pointer to a structure that will be used to store all //! device info. //! //! This function gets the device part number, chip IDs, and revision and //! stores them in the passed structure. //! //! @return None // //***************************************************************************** void am_hal_mcuctrl_device_info_get(am_hal_mcuctrl_device_t *psDevice) { // // Read the Part Number. // psDevice->ui32ChipPN = AM_REG(MCUCTRL, CHIP_INFO); // // Read the Chip ID0. // psDevice->ui32ChipID0 = AM_REG(MCUCTRL, CHIPID0); // // Read the Chip ID1. // psDevice->ui32ChipID1 = AM_REG(MCUCTRL, CHIPID1); // // Read the Chip Revision. // psDevice->ui32ChipRev = AM_REG(MCUCTRL, CHIPREV); // // Read the Part Number. // psDevice->ui32ChipPN = AM_REG(MCUCTRL, CHIP_INFO); // // Read the Chip ID0. // psDevice->ui32ChipID0 = AM_REG(MCUCTRL, CHIPID0); // // Read the Chip ID1. // psDevice->ui32ChipID1 = AM_REG(MCUCTRL, CHIPID1); // // Read the Chip Revision. // psDevice->ui32ChipRev = AM_REG(MCUCTRL, CHIPREV); // // Read the Chip VENDOR ID. // psDevice->ui32VendorID = AM_REG(MCUCTRL, VENDORID); // // Qualified from Part Number. // psDevice->ui32Qualified = (psDevice->ui32ChipPN & AM_HAL_MCUCTRL_CHIP_INFO_QUAL_M) >> AM_HAL_MCUCTRL_CHIP_INFO_QUAL_S; // // Flash size from Part Number. // psDevice->ui32FlashSize = g_am_hal_mcuctrl_flash_size[ (psDevice->ui32ChipPN & AM_HAL_MCUCTRL_CHIP_INFO_FLASH_SIZE_M) >> AM_HAL_MCUCTRL_CHIP_INFO_FLASH_SIZE_S]; // // SRAM size from Part Number. // psDevice->ui32SRAMSize = g_am_hal_mcuctrl_flash_size[ (psDevice->ui32ChipPN & AM_HAL_MCUCTRL_CHIP_INFO_SRAM_SIZE_M) >> AM_HAL_MCUCTRL_CHIP_INFO_SRAM_SIZE_S]; // // Now, let's look at the JEDEC info. // The full partnumber is 12 bits total, but is scattered across 2 registers. // Bits [11:8] are 0xE. // Bits [7:4] are 0xE for Apollo, 0xD for Apollo2. // Bits [3:0] are defined differently for Apollo and Apollo2. // For Apollo, the low nibble is 0x0. // For Apollo2, the low nibble indicates flash and SRAM size. // psDevice->ui32JedecPN = (AM_BFR(JEDEC, PID0, PNL8) << 0); psDevice->ui32JedecPN |= (AM_BFR(JEDEC, PID1, PNH4) << 8); // // JEPID is the JEP-106 Manufacturer ID Code, which is assigned to Ambiq as // 0x1B, with parity bit is 0x9B. It is 8 bits located across 2 registers. // psDevice->ui32JedecJEPID = (AM_BFR(JEDEC, PID1, JEPIDL) << 0); psDevice->ui32JedecJEPID |= (AM_BFR(JEDEC, PID2, JEPIDH) << 4); // // CHIPREV is 8 bits located across 2 registers. // psDevice->ui32JedecCHIPREV = (AM_BFR(JEDEC, PID2, CHIPREVH4) << 4); psDevice->ui32JedecCHIPREV |= (AM_BFR(JEDEC, PID3, CHIPREVL4) << 0); // // Let's get the Coresight ID (32-bits across 4 registers) // For Apollo and Apollo2, it's expected to be 0xB105100D. // psDevice->ui32JedecCID = (AM_BFR(JEDEC, CID3, CID) << 24); psDevice->ui32JedecCID |= (AM_BFR(JEDEC, CID2, CID) << 16); psDevice->ui32JedecCID |= (AM_BFR(JEDEC, CID1, CID) << 8); psDevice->ui32JedecCID |= (AM_BFR(JEDEC, CID0, CID) << 0); } //***************************************************************************** // //! @brief Enables the fault capture registers. //! //! This function enables the DCODEFAULTADDR and ICODEFAULTADDR registers. //! //! @return None // //***************************************************************************** void am_hal_mcuctrl_fault_capture_enable(void) { // // Enable the Fault Capture registers. // AM_BFW(MCUCTRL, FAULTCAPTUREEN, ENABLE, 1); } //***************************************************************************** // //! @brief Disables the fault capture registers. //! //! This function disables the DCODEFAULTADDR and ICODEFAULTADDR registers. //! //! @return None // //***************************************************************************** void am_hal_mcuctrl_fault_capture_disable(void) { // // Disable the Fault Capture registers. // AM_BFW(MCUCTRL, FAULTCAPTUREEN, ENABLE, 0); } //***************************************************************************** // //! @brief Gets the fault status and capture registers. //! //! @param psFault is a pointer to a structure that will be used to store all //! fault info. //! //! This function gets the status of the ICODE, DCODE, and SYS bus faults and //! the addresses associated with the fault. //! //! @return None // //***************************************************************************** void am_hal_mcuctrl_fault_status(am_hal_mcuctrl_fault_t *psFault) { uint32_t ui32FaultStat; // // Read the Fault Status Register. // ui32FaultStat = AM_REG(MCUCTRL, FAULTSTATUS); psFault->bICODE = (ui32FaultStat & AM_REG_MCUCTRL_FAULTSTATUS_ICODE_M); psFault->bDCODE = (ui32FaultStat & AM_REG_MCUCTRL_FAULTSTATUS_DCODE_M); psFault->bSYS = (ui32FaultStat & AM_REG_MCUCTRL_FAULTSTATUS_SYS_M); // // Read the DCODE fault capture address register. // psFault->ui32DCODE = AM_REG(MCUCTRL, DCODEFAULTADDR); // // Read the ICODE fault capture address register. // psFault->ui32ICODE |= AM_REG(MCUCTRL, ICODEFAULTADDR); // // Read the ICODE fault capture address register. // psFault->ui32SYS |= AM_REG(MCUCTRL, SYSFAULTADDR); } //***************************************************************************** // // End Doxygen group. //! @} // //*****************************************************************************