import rtconfig
from building import *

cwd = GetCurrentDir()

# add the general drivers.
src = Glob('board.c')
src += Glob('CubeMX_Config/Src/stm32h7xx_hal_msp.c')

if GetDepend(['BSP_USING_QSPI_FLASH']):
    src += Glob('ports/drv_qspi_flash.c')

if GetDepend('BSP_USING_SPI_LCD'):
    src = src + ['ports/drv_lcd.c']

path = [cwd]
path += [cwd + '/CubeMX_Config/Inc']

if rtconfig.CROSS_TOOL == 'gcc':
    src += [cwd + '/../../libraries/STM32H7xx_HAL/CMSIS/Device/ST/STM32H7xx/Source/Templates/gcc/startup_stm32h743xx.s']
elif rtconfig.CROSS_TOOL == 'keil':
    src += [cwd + '/../../libraries/STM32H7xx_HAL/CMSIS/Device/ST/STM32H7xx/Source/Templates/arm/startup_stm32h743xx.s']
elif rtconfig.CROSS_TOOL == 'iar':
    src += [cwd + '/../../libraries/STM32H7xx_HAL/CMSIS/Device/ST/STM32H7xx/Source/Templates/iar/startup_stm32h743xx.s']

# STM32H743xx || STM32H750xx || STM32F753xx
# You can select chips from the list above
CPPDEFINES = ['STM32H750xx']
group = DefineGroup('Drivers', src, depend = [''], CPPPATH = path, CPPDEFINES = CPPDEFINES)

Return('group')