//***************************************************************************** // // am_reg_ioslave.h //! @file //! //! @brief Register macros for the IOSLAVE module // //***************************************************************************** //***************************************************************************** // // Copyright (c) 2017, Ambiq Micro // All rights reserved. // // Redistribution and use in source and binary forms, with or without // modification, are permitted provided that the following conditions are met: // // 1. Redistributions of source code must retain the above copyright notice, // this list of conditions and the following disclaimer. // // 2. Redistributions in binary form must reproduce the above copyright // notice, this list of conditions and the following disclaimer in the // documentation and/or other materials provided with the distribution. // // 3. Neither the name of the copyright holder nor the names of its // contributors may be used to endorse or promote products derived from this // software without specific prior written permission. // // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" // AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE // IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE // ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE // LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR // CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF // SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS // INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN // CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) // ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE // POSSIBILITY OF SUCH DAMAGE. // // This is part of revision 1.2.9 of the AmbiqSuite Development Package. // //***************************************************************************** #ifndef AM_REG_IOSLAVE_H #define AM_REG_IOSLAVE_H //***************************************************************************** // // Instance finder. (1 instance(s) available) // //***************************************************************************** #define AM_REG_IOSLAVE_NUM_MODULES 1 #define AM_REG_IOSLAVEn(n) \ (REG_IOSLAVE_BASEADDR + 0x00000000 * n) //***************************************************************************** // // Register offsets. // //***************************************************************************** #define AM_REG_IOSLAVE_FIFOPTR_O 0x00000100 #define AM_REG_IOSLAVE_FIFOCFG_O 0x00000104 #define AM_REG_IOSLAVE_FIFOTHR_O 0x00000108 #define AM_REG_IOSLAVE_FUPD_O 0x0000010C #define AM_REG_IOSLAVE_FIFOCTR_O 0x00000110 #define AM_REG_IOSLAVE_FIFOINC_O 0x00000114 #define AM_REG_IOSLAVE_CFG_O 0x00000118 #define AM_REG_IOSLAVE_PRENC_O 0x0000011C #define AM_REG_IOSLAVE_IOINTCTL_O 0x00000120 #define AM_REG_IOSLAVE_GENADD_O 0x00000124 #define AM_REG_IOSLAVE_INTEN_O 0x00000200 #define AM_REG_IOSLAVE_INTSTAT_O 0x00000204 #define AM_REG_IOSLAVE_INTCLR_O 0x00000208 #define AM_REG_IOSLAVE_INTSET_O 0x0000020C #define AM_REG_IOSLAVE_REGACCINTEN_O 0x00000210 #define AM_REG_IOSLAVE_REGACCINTSTAT_O 0x00000214 #define AM_REG_IOSLAVE_REGACCINTCLR_O 0x00000218 #define AM_REG_IOSLAVE_REGACCINTSET_O 0x0000021C //***************************************************************************** // // IOSLAVE_INTEN - IO Slave Interrupts: Enable // //***************************************************************************** // Transfer complete interrupt, write to register space. #define AM_REG_IOSLAVE_INTEN_XCMPWR_S 9 #define AM_REG_IOSLAVE_INTEN_XCMPWR_M 0x00000200 #define AM_REG_IOSLAVE_INTEN_XCMPWR(n) (((uint32_t)(n) << 9) & 0x00000200) // Transfer complete interrupt, write to FIFO space. #define AM_REG_IOSLAVE_INTEN_XCMPWF_S 8 #define AM_REG_IOSLAVE_INTEN_XCMPWF_M 0x00000100 #define AM_REG_IOSLAVE_INTEN_XCMPWF(n) (((uint32_t)(n) << 8) & 0x00000100) // Transfer complete interrupt, read from register space. #define AM_REG_IOSLAVE_INTEN_XCMPRR_S 7 #define AM_REG_IOSLAVE_INTEN_XCMPRR_M 0x00000080 #define AM_REG_IOSLAVE_INTEN_XCMPRR(n) (((uint32_t)(n) << 7) & 0x00000080) // Transfer complete interrupt, read from FIFO space. #define AM_REG_IOSLAVE_INTEN_XCMPRF_S 6 #define AM_REG_IOSLAVE_INTEN_XCMPRF_M 0x00000040 #define AM_REG_IOSLAVE_INTEN_XCMPRF(n) (((uint32_t)(n) << 6) & 0x00000040) // I2C Interrupt Write interrupt. #define AM_REG_IOSLAVE_INTEN_IOINTW_S 5 #define AM_REG_IOSLAVE_INTEN_IOINTW_M 0x00000020 #define AM_REG_IOSLAVE_INTEN_IOINTW(n) (((uint32_t)(n) << 5) & 0x00000020) // I2C General Address interrupt. #define AM_REG_IOSLAVE_INTEN_GENAD_S 4 #define AM_REG_IOSLAVE_INTEN_GENAD_M 0x00000010 #define AM_REG_IOSLAVE_INTEN_GENAD(n) (((uint32_t)(n) << 4) & 0x00000010) // FIFO Read Error interrupt. #define AM_REG_IOSLAVE_INTEN_FRDERR_S 3 #define AM_REG_IOSLAVE_INTEN_FRDERR_M 0x00000008 #define AM_REG_IOSLAVE_INTEN_FRDERR(n) (((uint32_t)(n) << 3) & 0x00000008) // FIFO Underflow interrupt. #define AM_REG_IOSLAVE_INTEN_FUNDFL_S 2 #define AM_REG_IOSLAVE_INTEN_FUNDFL_M 0x00000004 #define AM_REG_IOSLAVE_INTEN_FUNDFL(n) (((uint32_t)(n) << 2) & 0x00000004) // FIFO Overflow interrupt. #define AM_REG_IOSLAVE_INTEN_FOVFL_S 1 #define AM_REG_IOSLAVE_INTEN_FOVFL_M 0x00000002 #define AM_REG_IOSLAVE_INTEN_FOVFL(n) (((uint32_t)(n) << 1) & 0x00000002) // FIFO Size interrupt. #define AM_REG_IOSLAVE_INTEN_FSIZE_S 0 #define AM_REG_IOSLAVE_INTEN_FSIZE_M 0x00000001 #define AM_REG_IOSLAVE_INTEN_FSIZE(n) (((uint32_t)(n) << 0) & 0x00000001) //***************************************************************************** // // IOSLAVE_INTSTAT - IO Slave Interrupts: Status // //***************************************************************************** // Transfer complete interrupt, write to register space. #define AM_REG_IOSLAVE_INTSTAT_XCMPWR_S 9 #define AM_REG_IOSLAVE_INTSTAT_XCMPWR_M 0x00000200 #define AM_REG_IOSLAVE_INTSTAT_XCMPWR(n) (((uint32_t)(n) << 9) & 0x00000200) // Transfer complete interrupt, write to FIFO space. #define AM_REG_IOSLAVE_INTSTAT_XCMPWF_S 8 #define AM_REG_IOSLAVE_INTSTAT_XCMPWF_M 0x00000100 #define AM_REG_IOSLAVE_INTSTAT_XCMPWF(n) (((uint32_t)(n) << 8) & 0x00000100) // Transfer complete interrupt, read from register space. #define AM_REG_IOSLAVE_INTSTAT_XCMPRR_S 7 #define AM_REG_IOSLAVE_INTSTAT_XCMPRR_M 0x00000080 #define AM_REG_IOSLAVE_INTSTAT_XCMPRR(n) (((uint32_t)(n) << 7) & 0x00000080) // Transfer complete interrupt, read from FIFO space. #define AM_REG_IOSLAVE_INTSTAT_XCMPRF_S 6 #define AM_REG_IOSLAVE_INTSTAT_XCMPRF_M 0x00000040 #define AM_REG_IOSLAVE_INTSTAT_XCMPRF(n) (((uint32_t)(n) << 6) & 0x00000040) // I2C Interrupt Write interrupt. #define AM_REG_IOSLAVE_INTSTAT_IOINTW_S 5 #define AM_REG_IOSLAVE_INTSTAT_IOINTW_M 0x00000020 #define AM_REG_IOSLAVE_INTSTAT_IOINTW(n) (((uint32_t)(n) << 5) & 0x00000020) // I2C General Address interrupt. #define AM_REG_IOSLAVE_INTSTAT_GENAD_S 4 #define AM_REG_IOSLAVE_INTSTAT_GENAD_M 0x00000010 #define AM_REG_IOSLAVE_INTSTAT_GENAD(n) (((uint32_t)(n) << 4) & 0x00000010) // FIFO Read Error interrupt. #define AM_REG_IOSLAVE_INTSTAT_FRDERR_S 3 #define AM_REG_IOSLAVE_INTSTAT_FRDERR_M 0x00000008 #define AM_REG_IOSLAVE_INTSTAT_FRDERR(n) (((uint32_t)(n) << 3) & 0x00000008) // FIFO Underflow interrupt. #define AM_REG_IOSLAVE_INTSTAT_FUNDFL_S 2 #define AM_REG_IOSLAVE_INTSTAT_FUNDFL_M 0x00000004 #define AM_REG_IOSLAVE_INTSTAT_FUNDFL(n) (((uint32_t)(n) << 2) & 0x00000004) // FIFO Overflow interrupt. #define AM_REG_IOSLAVE_INTSTAT_FOVFL_S 1 #define AM_REG_IOSLAVE_INTSTAT_FOVFL_M 0x00000002 #define AM_REG_IOSLAVE_INTSTAT_FOVFL(n) (((uint32_t)(n) << 1) & 0x00000002) // FIFO Size interrupt. #define AM_REG_IOSLAVE_INTSTAT_FSIZE_S 0 #define AM_REG_IOSLAVE_INTSTAT_FSIZE_M 0x00000001 #define AM_REG_IOSLAVE_INTSTAT_FSIZE(n) (((uint32_t)(n) << 0) & 0x00000001) //***************************************************************************** // // IOSLAVE_INTCLR - IO Slave Interrupts: Clear // //***************************************************************************** // Transfer complete interrupt, write to register space. #define AM_REG_IOSLAVE_INTCLR_XCMPWR_S 9 #define AM_REG_IOSLAVE_INTCLR_XCMPWR_M 0x00000200 #define AM_REG_IOSLAVE_INTCLR_XCMPWR(n) (((uint32_t)(n) << 9) & 0x00000200) // Transfer complete interrupt, write to FIFO space. #define AM_REG_IOSLAVE_INTCLR_XCMPWF_S 8 #define AM_REG_IOSLAVE_INTCLR_XCMPWF_M 0x00000100 #define AM_REG_IOSLAVE_INTCLR_XCMPWF(n) (((uint32_t)(n) << 8) & 0x00000100) // Transfer complete interrupt, read from register space. #define AM_REG_IOSLAVE_INTCLR_XCMPRR_S 7 #define AM_REG_IOSLAVE_INTCLR_XCMPRR_M 0x00000080 #define AM_REG_IOSLAVE_INTCLR_XCMPRR(n) (((uint32_t)(n) << 7) & 0x00000080) // Transfer complete interrupt, read from FIFO space. #define AM_REG_IOSLAVE_INTCLR_XCMPRF_S 6 #define AM_REG_IOSLAVE_INTCLR_XCMPRF_M 0x00000040 #define AM_REG_IOSLAVE_INTCLR_XCMPRF(n) (((uint32_t)(n) << 6) & 0x00000040) // I2C Interrupt Write interrupt. #define AM_REG_IOSLAVE_INTCLR_IOINTW_S 5 #define AM_REG_IOSLAVE_INTCLR_IOINTW_M 0x00000020 #define AM_REG_IOSLAVE_INTCLR_IOINTW(n) (((uint32_t)(n) << 5) & 0x00000020) // I2C General Address interrupt. #define AM_REG_IOSLAVE_INTCLR_GENAD_S 4 #define AM_REG_IOSLAVE_INTCLR_GENAD_M 0x00000010 #define AM_REG_IOSLAVE_INTCLR_GENAD(n) (((uint32_t)(n) << 4) & 0x00000010) // FIFO Read Error interrupt. #define AM_REG_IOSLAVE_INTCLR_FRDERR_S 3 #define AM_REG_IOSLAVE_INTCLR_FRDERR_M 0x00000008 #define AM_REG_IOSLAVE_INTCLR_FRDERR(n) (((uint32_t)(n) << 3) & 0x00000008) // FIFO Underflow interrupt. #define AM_REG_IOSLAVE_INTCLR_FUNDFL_S 2 #define AM_REG_IOSLAVE_INTCLR_FUNDFL_M 0x00000004 #define AM_REG_IOSLAVE_INTCLR_FUNDFL(n) (((uint32_t)(n) << 2) & 0x00000004) // FIFO Overflow interrupt. #define AM_REG_IOSLAVE_INTCLR_FOVFL_S 1 #define AM_REG_IOSLAVE_INTCLR_FOVFL_M 0x00000002 #define AM_REG_IOSLAVE_INTCLR_FOVFL(n) (((uint32_t)(n) << 1) & 0x00000002) // FIFO Size interrupt. #define AM_REG_IOSLAVE_INTCLR_FSIZE_S 0 #define AM_REG_IOSLAVE_INTCLR_FSIZE_M 0x00000001 #define AM_REG_IOSLAVE_INTCLR_FSIZE(n) (((uint32_t)(n) << 0) & 0x00000001) //***************************************************************************** // // IOSLAVE_INTSET - IO Slave Interrupts: Set // //***************************************************************************** // Transfer complete interrupt, write to register space. #define AM_REG_IOSLAVE_INTSET_XCMPWR_S 9 #define AM_REG_IOSLAVE_INTSET_XCMPWR_M 0x00000200 #define AM_REG_IOSLAVE_INTSET_XCMPWR(n) (((uint32_t)(n) << 9) & 0x00000200) // Transfer complete interrupt, write to FIFO space. #define AM_REG_IOSLAVE_INTSET_XCMPWF_S 8 #define AM_REG_IOSLAVE_INTSET_XCMPWF_M 0x00000100 #define AM_REG_IOSLAVE_INTSET_XCMPWF(n) (((uint32_t)(n) << 8) & 0x00000100) // Transfer complete interrupt, read from register space. #define AM_REG_IOSLAVE_INTSET_XCMPRR_S 7 #define AM_REG_IOSLAVE_INTSET_XCMPRR_M 0x00000080 #define AM_REG_IOSLAVE_INTSET_XCMPRR(n) (((uint32_t)(n) << 7) & 0x00000080) // Transfer complete interrupt, read from FIFO space. #define AM_REG_IOSLAVE_INTSET_XCMPRF_S 6 #define AM_REG_IOSLAVE_INTSET_XCMPRF_M 0x00000040 #define AM_REG_IOSLAVE_INTSET_XCMPRF(n) (((uint32_t)(n) << 6) & 0x00000040) // I2C Interrupt Write interrupt. #define AM_REG_IOSLAVE_INTSET_IOINTW_S 5 #define AM_REG_IOSLAVE_INTSET_IOINTW_M 0x00000020 #define AM_REG_IOSLAVE_INTSET_IOINTW(n) (((uint32_t)(n) << 5) & 0x00000020) // I2C General Address interrupt. #define AM_REG_IOSLAVE_INTSET_GENAD_S 4 #define AM_REG_IOSLAVE_INTSET_GENAD_M 0x00000010 #define AM_REG_IOSLAVE_INTSET_GENAD(n) (((uint32_t)(n) << 4) & 0x00000010) // FIFO Read Error interrupt. #define AM_REG_IOSLAVE_INTSET_FRDERR_S 3 #define AM_REG_IOSLAVE_INTSET_FRDERR_M 0x00000008 #define AM_REG_IOSLAVE_INTSET_FRDERR(n) (((uint32_t)(n) << 3) & 0x00000008) // FIFO Underflow interrupt. #define AM_REG_IOSLAVE_INTSET_FUNDFL_S 2 #define AM_REG_IOSLAVE_INTSET_FUNDFL_M 0x00000004 #define AM_REG_IOSLAVE_INTSET_FUNDFL(n) (((uint32_t)(n) << 2) & 0x00000004) // FIFO Overflow interrupt. #define AM_REG_IOSLAVE_INTSET_FOVFL_S 1 #define AM_REG_IOSLAVE_INTSET_FOVFL_M 0x00000002 #define AM_REG_IOSLAVE_INTSET_FOVFL(n) (((uint32_t)(n) << 1) & 0x00000002) // FIFO Size interrupt. #define AM_REG_IOSLAVE_INTSET_FSIZE_S 0 #define AM_REG_IOSLAVE_INTSET_FSIZE_M 0x00000001 #define AM_REG_IOSLAVE_INTSET_FSIZE(n) (((uint32_t)(n) << 0) & 0x00000001) //***************************************************************************** // // IOSLAVE_REGACCINTEN - Register Access Interrupts: Enable // //***************************************************************************** // Register access interrupts. #define AM_REG_IOSLAVE_REGACCINTEN_REGACC_S 0 #define AM_REG_IOSLAVE_REGACCINTEN_REGACC_M 0xFFFFFFFF #define AM_REG_IOSLAVE_REGACCINTEN_REGACC(n) (((uint32_t)(n) << 0) & 0xFFFFFFFF) //***************************************************************************** // // IOSLAVE_REGACCINTSTAT - Register Access Interrupts: Status // //***************************************************************************** // Register access interrupts. #define AM_REG_IOSLAVE_REGACCINTSTAT_REGACC_S 0 #define AM_REG_IOSLAVE_REGACCINTSTAT_REGACC_M 0xFFFFFFFF #define AM_REG_IOSLAVE_REGACCINTSTAT_REGACC(n) (((uint32_t)(n) << 0) & 0xFFFFFFFF) //***************************************************************************** // // IOSLAVE_REGACCINTCLR - Register Access Interrupts: Clear // //***************************************************************************** // Register access interrupts. #define AM_REG_IOSLAVE_REGACCINTCLR_REGACC_S 0 #define AM_REG_IOSLAVE_REGACCINTCLR_REGACC_M 0xFFFFFFFF #define AM_REG_IOSLAVE_REGACCINTCLR_REGACC(n) (((uint32_t)(n) << 0) & 0xFFFFFFFF) //***************************************************************************** // // IOSLAVE_REGACCINTSET - Register Access Interrupts: Set // //***************************************************************************** // Register access interrupts. #define AM_REG_IOSLAVE_REGACCINTSET_REGACC_S 0 #define AM_REG_IOSLAVE_REGACCINTSET_REGACC_M 0xFFFFFFFF #define AM_REG_IOSLAVE_REGACCINTSET_REGACC(n) (((uint32_t)(n) << 0) & 0xFFFFFFFF) //***************************************************************************** // // IOSLAVE_FIFOPTR - Current FIFO Pointer // //***************************************************************************** // The number of bytes currently in the hardware FIFO. #define AM_REG_IOSLAVE_FIFOPTR_FIFOSIZ_S 8 #define AM_REG_IOSLAVE_FIFOPTR_FIFOSIZ_M 0x0000FF00 #define AM_REG_IOSLAVE_FIFOPTR_FIFOSIZ(n) (((uint32_t)(n) << 8) & 0x0000FF00) // Current FIFO pointer. #define AM_REG_IOSLAVE_FIFOPTR_FIFOPTR_S 0 #define AM_REG_IOSLAVE_FIFOPTR_FIFOPTR_M 0x000000FF #define AM_REG_IOSLAVE_FIFOPTR_FIFOPTR(n) (((uint32_t)(n) << 0) & 0x000000FF) //***************************************************************************** // // IOSLAVE_FIFOCFG - FIFO Configuration // //***************************************************************************** // Defines the read-only area. The IO Slave read-only area is situated in LRAM // at (ROBASE*8) to (FIFOOBASE*8-1) #define AM_REG_IOSLAVE_FIFOCFG_ROBASE_S 24 #define AM_REG_IOSLAVE_FIFOCFG_ROBASE_M 0x3F000000 #define AM_REG_IOSLAVE_FIFOCFG_ROBASE(n) (((uint32_t)(n) << 24) & 0x3F000000) // These bits hold the maximum FIFO address in 8 byte segments. It is also the // beginning of the RAM area of the LRAM. Note that no RAM area is configured // if FIFOMAX is set to 0x1F. #define AM_REG_IOSLAVE_FIFOCFG_FIFOMAX_S 8 #define AM_REG_IOSLAVE_FIFOCFG_FIFOMAX_M 0x00003F00 #define AM_REG_IOSLAVE_FIFOCFG_FIFOMAX(n) (((uint32_t)(n) << 8) & 0x00003F00) // These bits hold the base address of the I/O FIFO in 8 byte segments. The IO // Slave FIFO is situated in LRAM at (FIFOBASE*8) to (FIFOMAX*8-1). #define AM_REG_IOSLAVE_FIFOCFG_FIFOBASE_S 0 #define AM_REG_IOSLAVE_FIFOCFG_FIFOBASE_M 0x0000001F #define AM_REG_IOSLAVE_FIFOCFG_FIFOBASE(n) (((uint32_t)(n) << 0) & 0x0000001F) //***************************************************************************** // // IOSLAVE_FIFOTHR - FIFO Threshold Configuration // //***************************************************************************** // FIFO size interrupt threshold. #define AM_REG_IOSLAVE_FIFOTHR_FIFOTHR_S 0 #define AM_REG_IOSLAVE_FIFOTHR_FIFOTHR_M 0x000000FF #define AM_REG_IOSLAVE_FIFOTHR_FIFOTHR(n) (((uint32_t)(n) << 0) & 0x000000FF) //***************************************************************************** // // IOSLAVE_FUPD - FIFO Update Status // //***************************************************************************** // This bitfield indicates an IO read is active. #define AM_REG_IOSLAVE_FUPD_IOREAD_S 1 #define AM_REG_IOSLAVE_FUPD_IOREAD_M 0x00000002 #define AM_REG_IOSLAVE_FUPD_IOREAD(n) (((uint32_t)(n) << 1) & 0x00000002) // This bit indicates that a FIFO update is underway. #define AM_REG_IOSLAVE_FUPD_FIFOUPD_S 0 #define AM_REG_IOSLAVE_FUPD_FIFOUPD_M 0x00000001 #define AM_REG_IOSLAVE_FUPD_FIFOUPD(n) (((uint32_t)(n) << 0) & 0x00000001) //***************************************************************************** // // IOSLAVE_FIFOCTR - Overall FIFO Counter // //***************************************************************************** // Virtual FIFO byte count #define AM_REG_IOSLAVE_FIFOCTR_FIFOCTR_S 0 #define AM_REG_IOSLAVE_FIFOCTR_FIFOCTR_M 0x000003FF #define AM_REG_IOSLAVE_FIFOCTR_FIFOCTR(n) (((uint32_t)(n) << 0) & 0x000003FF) //***************************************************************************** // // IOSLAVE_FIFOINC - Overall FIFO Counter Increment // //***************************************************************************** // Increment the Overall FIFO Counter by this value on a write #define AM_REG_IOSLAVE_FIFOINC_FIFOINC_S 0 #define AM_REG_IOSLAVE_FIFOINC_FIFOINC_M 0x000003FF #define AM_REG_IOSLAVE_FIFOINC_FIFOINC(n) (((uint32_t)(n) << 0) & 0x000003FF) //***************************************************************************** // // IOSLAVE_CFG - I/O Slave Configuration // //***************************************************************************** // IOSLAVE interface enable. #define AM_REG_IOSLAVE_CFG_IFCEN_S 31 #define AM_REG_IOSLAVE_CFG_IFCEN_M 0x80000000 #define AM_REG_IOSLAVE_CFG_IFCEN(n) (((uint32_t)(n) << 31) & 0x80000000) #define AM_REG_IOSLAVE_CFG_IFCEN_DIS 0x00000000 #define AM_REG_IOSLAVE_CFG_IFCEN_EN 0x80000000 // 7-bit or 10-bit I2C device address. #define AM_REG_IOSLAVE_CFG_I2CADDR_S 8 #define AM_REG_IOSLAVE_CFG_I2CADDR_M 0x000FFF00 #define AM_REG_IOSLAVE_CFG_I2CADDR(n) (((uint32_t)(n) << 8) & 0x000FFF00) // This bit holds the cycle to initiate an I/O RAM read. #define AM_REG_IOSLAVE_CFG_STARTRD_S 4 #define AM_REG_IOSLAVE_CFG_STARTRD_M 0x00000010 #define AM_REG_IOSLAVE_CFG_STARTRD(n) (((uint32_t)(n) << 4) & 0x00000010) #define AM_REG_IOSLAVE_CFG_STARTRD_LATE 0x00000000 #define AM_REG_IOSLAVE_CFG_STARTRD_EARLY 0x00000010 // This bit selects the transfer bit ordering. #define AM_REG_IOSLAVE_CFG_LSB_S 2 #define AM_REG_IOSLAVE_CFG_LSB_M 0x00000004 #define AM_REG_IOSLAVE_CFG_LSB(n) (((uint32_t)(n) << 2) & 0x00000004) #define AM_REG_IOSLAVE_CFG_LSB_MSB_FIRST 0x00000000 #define AM_REG_IOSLAVE_CFG_LSB_LSB_FIRST 0x00000004 // This bit selects SPI polarity. #define AM_REG_IOSLAVE_CFG_SPOL_S 1 #define AM_REG_IOSLAVE_CFG_SPOL_M 0x00000002 #define AM_REG_IOSLAVE_CFG_SPOL(n) (((uint32_t)(n) << 1) & 0x00000002) #define AM_REG_IOSLAVE_CFG_SPOL_SPI_MODES_0_3 0x00000000 #define AM_REG_IOSLAVE_CFG_SPOL_SPI_MODES_1_2 0x00000002 // This bit selects the I/O interface. #define AM_REG_IOSLAVE_CFG_IFCSEL_S 0 #define AM_REG_IOSLAVE_CFG_IFCSEL_M 0x00000001 #define AM_REG_IOSLAVE_CFG_IFCSEL(n) (((uint32_t)(n) << 0) & 0x00000001) #define AM_REG_IOSLAVE_CFG_IFCSEL_I2C 0x00000000 #define AM_REG_IOSLAVE_CFG_IFCSEL_SPI 0x00000001 //***************************************************************************** // // IOSLAVE_PRENC - I/O Slave Interrupt Priority Encode // //***************************************************************************** // These bits hold the priority encode of the REGACC interrupts. #define AM_REG_IOSLAVE_PRENC_PRENC_S 0 #define AM_REG_IOSLAVE_PRENC_PRENC_M 0x0000001F #define AM_REG_IOSLAVE_PRENC_PRENC(n) (((uint32_t)(n) << 0) & 0x0000001F) //***************************************************************************** // // IOSLAVE_IOINTCTL - I/O Interrupt Control // //***************************************************************************** // These bits set the IOINT interrupts when written with a 1. #define AM_REG_IOSLAVE_IOINTCTL_IOINTSET_S 24 #define AM_REG_IOSLAVE_IOINTCTL_IOINTSET_M 0xFF000000 #define AM_REG_IOSLAVE_IOINTCTL_IOINTSET(n) (((uint32_t)(n) << 24) & 0xFF000000) // This bit clears all of the IOINT interrupts when written with a 1. #define AM_REG_IOSLAVE_IOINTCTL_IOINTCLR_S 16 #define AM_REG_IOSLAVE_IOINTCTL_IOINTCLR_M 0x00010000 #define AM_REG_IOSLAVE_IOINTCTL_IOINTCLR(n) (((uint32_t)(n) << 16) & 0x00010000) // These bits read the IOINT interrupts. #define AM_REG_IOSLAVE_IOINTCTL_IOINT_S 8 #define AM_REG_IOSLAVE_IOINTCTL_IOINT_M 0x0000FF00 #define AM_REG_IOSLAVE_IOINTCTL_IOINT(n) (((uint32_t)(n) << 8) & 0x0000FF00) // These read-only bits indicate whether the IOINT interrupts are enabled. #define AM_REG_IOSLAVE_IOINTCTL_IOINTEN_S 0 #define AM_REG_IOSLAVE_IOINTCTL_IOINTEN_M 0x000000FF #define AM_REG_IOSLAVE_IOINTCTL_IOINTEN(n) (((uint32_t)(n) << 0) & 0x000000FF) //***************************************************************************** // // IOSLAVE_GENADD - General Address Data // //***************************************************************************** // The data supplied on the last General Address reference. #define AM_REG_IOSLAVE_GENADD_GADATA_S 0 #define AM_REG_IOSLAVE_GENADD_GADATA_M 0x000000FF #define AM_REG_IOSLAVE_GENADD_GADATA(n) (((uint32_t)(n) << 0) & 0x000000FF) #endif // AM_REG_IOSLAVE_H