//***************************************************************************** // // hw_adc.h - Macros used when accessing the ADC hardware. // // Copyright (c) 2005-2011 Texas Instruments Incorporated. All rights reserved. // Software License Agreement // // Texas Instruments (TI) is supplying this software for use solely and // exclusively on TI's microcontroller products. The software is owned by // TI and/or its suppliers, and is protected under applicable copyright // laws. You may not combine this software with "viral" open-source // software in order to form a larger program. // // THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. // NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT // NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR // A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY // CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL // DAMAGES, FOR ANY REASON WHATSOEVER. // // This is part of revision 8049 of the Stellaris Firmware Development Package. // //***************************************************************************** #ifndef __HW_ADC_H__ #define __HW_ADC_H__ //***************************************************************************** // // The following are defines for the ADC register offsets. // //***************************************************************************** #define ADC_O_ACTSS 0x00000000 // ADC Active Sample Sequencer #define ADC_O_RIS 0x00000004 // ADC Raw Interrupt Status #define ADC_O_IM 0x00000008 // ADC Interrupt Mask #define ADC_O_ISC 0x0000000C // ADC Interrupt Status and Clear #define ADC_O_OSTAT 0x00000010 // ADC Overflow Status #define ADC_O_EMUX 0x00000014 // ADC Event Multiplexer Select #define ADC_O_USTAT 0x00000018 // ADC Underflow Status #define ADC_O_TSSEL 0x0000001C // ADC Trigger Source Select #define ADC_O_SSPRI 0x00000020 // ADC Sample Sequencer Priority #define ADC_O_SPC 0x00000024 // ADC Sample Phase Control #define ADC_O_PSSI 0x00000028 // ADC Processor Sample Sequence // Initiate #define ADC_O_SAC 0x00000030 // ADC Sample Averaging Control #define ADC_O_DCISC 0x00000034 // ADC Digital Comparator Interrupt // Status and Clear #define ADC_O_CTL 0x00000038 // ADC Control #define ADC_O_SSMUX0 0x00000040 // ADC Sample Sequence Input // Multiplexer Select 0 #define ADC_O_SSCTL0 0x00000044 // ADC Sample Sequence Control 0 #define ADC_O_SSFIFO0 0x00000048 // ADC Sample Sequence Result FIFO // 0 #define ADC_O_SSFSTAT0 0x0000004C // ADC Sample Sequence FIFO 0 // Status #define ADC_O_SSOP0 0x00000050 // ADC Sample Sequence 0 Operation #define ADC_O_SSDC0 0x00000054 // ADC Sample Sequence 0 Digital // Comparator Select #define ADC_O_SSEMUX0 0x00000058 // ADC Sample Sequence Extended // Input Multiplexer Select 0 #define ADC_O_SSMUX1 0x00000060 // ADC Sample Sequence Input // Multiplexer Select 1 #define ADC_O_SSCTL1 0x00000064 // ADC Sample Sequence Control 1 #define ADC_O_SSFIFO1 0x00000068 // ADC Sample Sequence Result FIFO // 1 #define ADC_O_SSFSTAT1 0x0000006C // ADC Sample Sequence FIFO 1 // Status #define ADC_O_SSOP1 0x00000070 // ADC Sample Sequence 1 Operation #define ADC_O_SSDC1 0x00000074 // ADC Sample Sequence 1 Digital // Comparator Select #define ADC_O_SSEMUX1 0x00000078 // ADC Sample Sequence Extended // Input Multiplexer Select 1 #define ADC_O_SSMUX2 0x00000080 // ADC Sample Sequence Input // Multiplexer Select 2 #define ADC_O_SSCTL2 0x00000084 // ADC Sample Sequence Control 2 #define ADC_O_SSFIFO2 0x00000088 // ADC Sample Sequence Result FIFO // 2 #define ADC_O_SSFSTAT2 0x0000008C // ADC Sample Sequence FIFO 2 // Status #define ADC_O_SSOP2 0x00000090 // ADC Sample Sequence 2 Operation #define ADC_O_SSDC2 0x00000094 // ADC Sample Sequence 2 Digital // Comparator Select #define ADC_O_SSEMUX2 0x00000098 // ADC Sample Sequence Extended // Input Multiplexer Select 2 #define ADC_O_SSMUX3 0x000000A0 // ADC Sample Sequence Input // Multiplexer Select 3 #define ADC_O_SSCTL3 0x000000A4 // ADC Sample Sequence Control 3 #define ADC_O_SSFIFO3 0x000000A8 // ADC Sample Sequence Result FIFO // 3 #define ADC_O_SSFSTAT3 0x000000AC // ADC Sample Sequence FIFO 3 // Status #define ADC_O_SSOP3 0x000000B0 // ADC Sample Sequence 3 Operation #define ADC_O_SSDC3 0x000000B4 // ADC Sample Sequence 3 Digital // Comparator Select #define ADC_O_SSEMUX3 0x000000B8 // ADC Sample Sequence Extended // Input Multiplexer Select 3 #define ADC_O_TMLB 0x00000100 // ADC Test Mode Loopback #define ADC_O_DCRIC 0x00000D00 // ADC Digital Comparator Reset // Initial Conditions #define ADC_O_DCCTL0 0x00000E00 // ADC Digital Comparator Control 0 #define ADC_O_DCCTL1 0x00000E04 // ADC Digital Comparator Control 1 #define ADC_O_DCCTL2 0x00000E08 // ADC Digital Comparator Control 2 #define ADC_O_DCCTL3 0x00000E0C // ADC Digital Comparator Control 3 #define ADC_O_DCCTL4 0x00000E10 // ADC Digital Comparator Control 4 #define ADC_O_DCCTL5 0x00000E14 // ADC Digital Comparator Control 5 #define ADC_O_DCCTL6 0x00000E18 // ADC Digital Comparator Control 6 #define ADC_O_DCCTL7 0x00000E1C // ADC Digital Comparator Control 7 #define ADC_O_DCCMP0 0x00000E40 // ADC Digital Comparator Range 0 #define ADC_O_DCCMP1 0x00000E44 // ADC Digital Comparator Range 1 #define ADC_O_DCCMP2 0x00000E48 // ADC Digital Comparator Range 2 #define ADC_O_DCCMP3 0x00000E4C // ADC Digital Comparator Range 3 #define ADC_O_DCCMP4 0x00000E50 // ADC Digital Comparator Range 4 #define ADC_O_DCCMP5 0x00000E54 // ADC Digital Comparator Range 5 #define ADC_O_DCCMP6 0x00000E58 // ADC Digital Comparator Range 6 #define ADC_O_DCCMP7 0x00000E5C // ADC Digital Comparator Range 7 #define ADC_O_PP 0x00000FC0 // ADC Peripheral Properties #define ADC_O_PC 0x00000FC4 // ADC Peripheral Configuration #define ADC_O_CC 0x00000FC8 // ADC Clock Configuration //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_ACTSS register. // //***************************************************************************** #define ADC_ACTSS_ASEN3 0x00000008 // ADC SS3 Enable #define ADC_ACTSS_ASEN2 0x00000004 // ADC SS2 Enable #define ADC_ACTSS_ASEN1 0x00000002 // ADC SS1 Enable #define ADC_ACTSS_ASEN0 0x00000001 // ADC SS0 Enable //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_RIS register. // //***************************************************************************** #define ADC_RIS_INRDC 0x00010000 // Digital Comparator Raw Interrupt // Status #define ADC_RIS_INR3 0x00000008 // SS3 Raw Interrupt Status #define ADC_RIS_INR2 0x00000004 // SS2 Raw Interrupt Status #define ADC_RIS_INR1 0x00000002 // SS1 Raw Interrupt Status #define ADC_RIS_INR0 0x00000001 // SS0 Raw Interrupt Status //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_IM register. // //***************************************************************************** #define ADC_IM_DCONSS3 0x00080000 // Digital Comparator Interrupt on // SS3 #define ADC_IM_DCONSS2 0x00040000 // Digital Comparator Interrupt on // SS2 #define ADC_IM_DCONSS1 0x00020000 // Digital Comparator Interrupt on // SS1 #define ADC_IM_DCONSS0 0x00010000 // Digital Comparator Interrupt on // SS0 #define ADC_IM_MASK3 0x00000008 // SS3 Interrupt Mask #define ADC_IM_MASK2 0x00000004 // SS2 Interrupt Mask #define ADC_IM_MASK1 0x00000002 // SS1 Interrupt Mask #define ADC_IM_MASK0 0x00000001 // SS0 Interrupt Mask //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_ISC register. // //***************************************************************************** #define ADC_ISC_DCINSS3 0x00080000 // Digital Comparator Interrupt // Status on SS3 #define ADC_ISC_DCINSS2 0x00040000 // Digital Comparator Interrupt // Status on SS2 #define ADC_ISC_DCINSS1 0x00020000 // Digital Comparator Interrupt // Status on SS1 #define ADC_ISC_DCINSS0 0x00010000 // Digital Comparator Interrupt // Status on SS0 #define ADC_ISC_IN3 0x00000008 // SS3 Interrupt Status and Clear #define ADC_ISC_IN2 0x00000004 // SS2 Interrupt Status and Clear #define ADC_ISC_IN1 0x00000002 // SS1 Interrupt Status and Clear #define ADC_ISC_IN0 0x00000001 // SS0 Interrupt Status and Clear //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_OSTAT register. // //***************************************************************************** #define ADC_OSTAT_OV3 0x00000008 // SS3 FIFO Overflow #define ADC_OSTAT_OV2 0x00000004 // SS2 FIFO Overflow #define ADC_OSTAT_OV1 0x00000002 // SS1 FIFO Overflow #define ADC_OSTAT_OV0 0x00000001 // SS0 FIFO Overflow //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_EMUX register. // //***************************************************************************** #define ADC_EMUX_EM3_M 0x0000F000 // SS3 Trigger Select #define ADC_EMUX_EM3_PROCESSOR 0x00000000 // Processor (default) #define ADC_EMUX_EM3_COMP0 0x00001000 // Analog Comparator 0 #define ADC_EMUX_EM3_COMP1 0x00002000 // Analog Comparator 1 #define ADC_EMUX_EM3_COMP2 0x00003000 // Analog Comparator 2 #define ADC_EMUX_EM3_EXTERNAL 0x00004000 // External (GPIO PB4) #define ADC_EMUX_EM3_TIMER 0x00005000 // Timer #define ADC_EMUX_EM3_PWM0 0x00006000 // PWM0 #define ADC_EMUX_EM3_PWM1 0x00007000 // PWM1 #define ADC_EMUX_EM3_PWM2 0x00008000 // PWM2 #define ADC_EMUX_EM3_PWM3 0x00009000 // PWM3 #define ADC_EMUX_EM3_ALWAYS 0x0000F000 // Always (continuously sample) #define ADC_EMUX_EM2_M 0x00000F00 // SS2 Trigger Select #define ADC_EMUX_EM2_PROCESSOR 0x00000000 // Processor (default) #define ADC_EMUX_EM2_COMP0 0x00000100 // Analog Comparator 0 #define ADC_EMUX_EM2_COMP1 0x00000200 // Analog Comparator 1 #define ADC_EMUX_EM2_COMP2 0x00000300 // Analog Comparator 2 #define ADC_EMUX_EM2_EXTERNAL 0x00000400 // External (GPIO PB4) #define ADC_EMUX_EM2_TIMER 0x00000500 // Timer #define ADC_EMUX_EM2_PWM0 0x00000600 // PWM0 #define ADC_EMUX_EM2_PWM1 0x00000700 // PWM1 #define ADC_EMUX_EM2_PWM2 0x00000800 // PWM2 #define ADC_EMUX_EM2_PWM3 0x00000900 // PWM3 #define ADC_EMUX_EM2_ALWAYS 0x00000F00 // Always (continuously sample) #define ADC_EMUX_EM1_M 0x000000F0 // SS1 Trigger Select #define ADC_EMUX_EM1_PROCESSOR 0x00000000 // Processor (default) #define ADC_EMUX_EM1_COMP0 0x00000010 // Analog Comparator 0 #define ADC_EMUX_EM1_COMP1 0x00000020 // Analog Comparator 1 #define ADC_EMUX_EM1_COMP2 0x00000030 // Analog Comparator 2 #define ADC_EMUX_EM1_EXTERNAL 0x00000040 // External (GPIO PB4) #define ADC_EMUX_EM1_TIMER 0x00000050 // Timer #define ADC_EMUX_EM1_PWM0 0x00000060 // PWM0 #define ADC_EMUX_EM1_PWM1 0x00000070 // PWM1 #define ADC_EMUX_EM1_PWM2 0x00000080 // PWM2 #define ADC_EMUX_EM1_PWM3 0x00000090 // PWM3 #define ADC_EMUX_EM1_ALWAYS 0x000000F0 // Always (continuously sample) #define ADC_EMUX_EM0_M 0x0000000F // SS0 Trigger Select #define ADC_EMUX_EM0_PROCESSOR 0x00000000 // Processor (default) #define ADC_EMUX_EM0_COMP0 0x00000001 // Analog Comparator 0 #define ADC_EMUX_EM0_COMP1 0x00000002 // Analog Comparator 1 #define ADC_EMUX_EM0_COMP2 0x00000003 // Analog Comparator 2 #define ADC_EMUX_EM0_EXTERNAL 0x00000004 // External (GPIO PB4) #define ADC_EMUX_EM0_TIMER 0x00000005 // Timer #define ADC_EMUX_EM0_PWM0 0x00000006 // PWM0 #define ADC_EMUX_EM0_PWM1 0x00000007 // PWM1 #define ADC_EMUX_EM0_PWM2 0x00000008 // PWM2 #define ADC_EMUX_EM0_PWM3 0x00000009 // PWM3 #define ADC_EMUX_EM0_ALWAYS 0x0000000F // Always (continuously sample) //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_USTAT register. // //***************************************************************************** #define ADC_USTAT_UV3 0x00000008 // SS3 FIFO Underflow #define ADC_USTAT_UV2 0x00000004 // SS2 FIFO Underflow #define ADC_USTAT_UV1 0x00000002 // SS1 FIFO Underflow #define ADC_USTAT_UV0 0x00000001 // SS0 FIFO Underflow //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_TSSEL register. // //***************************************************************************** #define ADC_TSSEL_PS3_M 0x03000000 // PWM Unit Select #define ADC_TSSEL_PS3_0 0x00000000 // PWM Unit 0 #define ADC_TSSEL_PS3_1 0x01000000 // PWM Unit 1 #define ADC_TSSEL_PS2_M 0x00030000 // PWM Unit Select #define ADC_TSSEL_PS2_0 0x00000000 // PWM Unit 0 #define ADC_TSSEL_PS2_1 0x00010000 // PWM Unit 1 #define ADC_TSSEL_PS1_M 0x00000300 // PWM Unit Select #define ADC_TSSEL_PS1_0 0x00000000 // PWM Unit 0 #define ADC_TSSEL_PS1_1 0x00000100 // PWM Unit 1 #define ADC_TSSEL_PS0_M 0x00000003 // PWM Unit Select #define ADC_TSSEL_PS0_0 0x00000000 // PWM Unit 0 #define ADC_TSSEL_PS0_1 0x00000001 // PWM Unit 1 //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_SSPRI register. // //***************************************************************************** #define ADC_SSPRI_SS3_M 0x00003000 // SS3 Priority #define ADC_SSPRI_SS3_1ST 0x00000000 // First priority #define ADC_SSPRI_SS3_2ND 0x00001000 // Second priority #define ADC_SSPRI_SS3_3RD 0x00002000 // Third priority #define ADC_SSPRI_SS3_4TH 0x00003000 // Fourth priority #define ADC_SSPRI_SS2_M 0x00000300 // SS2 Priority #define ADC_SSPRI_SS2_1ST 0x00000000 // First priority #define ADC_SSPRI_SS2_2ND 0x00000100 // Second priority #define ADC_SSPRI_SS2_3RD 0x00000200 // Third priority #define ADC_SSPRI_SS2_4TH 0x00000300 // Fourth priority #define ADC_SSPRI_SS1_M 0x00000030 // SS1 Priority #define ADC_SSPRI_SS1_1ST 0x00000000 // First priority #define ADC_SSPRI_SS1_2ND 0x00000010 // Second priority #define ADC_SSPRI_SS1_3RD 0x00000020 // Third priority #define ADC_SSPRI_SS1_4TH 0x00000030 // Fourth priority #define ADC_SSPRI_SS0_M 0x00000003 // SS0 Priority #define ADC_SSPRI_SS0_1ST 0x00000000 // First priority #define ADC_SSPRI_SS0_2ND 0x00000001 // Second priority #define ADC_SSPRI_SS0_3RD 0x00000002 // Third priority #define ADC_SSPRI_SS0_4TH 0x00000003 // Fourth priority //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_SPC register. // //***************************************************************************** #define ADC_SPC_PHASE_M 0x0000000F // Phase Difference #define ADC_SPC_PHASE_0 0x00000000 // ADC sample lags by 0.0 #define ADC_SPC_PHASE_22_5 0x00000001 // ADC sample lags by 22.5 #define ADC_SPC_PHASE_45 0x00000002 // ADC sample lags by 45.0 #define ADC_SPC_PHASE_67_5 0x00000003 // ADC sample lags by 67.5 #define ADC_SPC_PHASE_90 0x00000004 // ADC sample lags by 90.0 #define ADC_SPC_PHASE_112_5 0x00000005 // ADC sample lags by 112.5 #define ADC_SPC_PHASE_135 0x00000006 // ADC sample lags by 135.0 #define ADC_SPC_PHASE_157_5 0x00000007 // ADC sample lags by 157.5 #define ADC_SPC_PHASE_180 0x00000008 // ADC sample lags by 180.0 #define ADC_SPC_PHASE_202_5 0x00000009 // ADC sample lags by 202.5 #define ADC_SPC_PHASE_225 0x0000000A // ADC sample lags by 225.0 #define ADC_SPC_PHASE_247_5 0x0000000B // ADC sample lags by 247.5 #define ADC_SPC_PHASE_270 0x0000000C // ADC sample lags by 270.0 #define ADC_SPC_PHASE_292_5 0x0000000D // ADC sample lags by 292.5 #define ADC_SPC_PHASE_315 0x0000000E // ADC sample lags by 315.0 #define ADC_SPC_PHASE_337_5 0x0000000F // ADC sample lags by 337.5 //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_PSSI register. // //***************************************************************************** #define ADC_PSSI_GSYNC 0x80000000 // Global Synchronize #define ADC_PSSI_SYNCWAIT 0x08000000 // Synchronize Wait #define ADC_PSSI_SS3 0x00000008 // SS3 Initiate #define ADC_PSSI_SS2 0x00000004 // SS2 Initiate #define ADC_PSSI_SS1 0x00000002 // SS1 Initiate #define ADC_PSSI_SS0 0x00000001 // SS0 Initiate //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_SAC register. // //***************************************************************************** #define ADC_SAC_AVG_M 0x00000007 // Hardware Averaging Control #define ADC_SAC_AVG_OFF 0x00000000 // No hardware oversampling #define ADC_SAC_AVG_2X 0x00000001 // 2x hardware oversampling #define ADC_SAC_AVG_4X 0x00000002 // 4x hardware oversampling #define ADC_SAC_AVG_8X 0x00000003 // 8x hardware oversampling #define ADC_SAC_AVG_16X 0x00000004 // 16x hardware oversampling #define ADC_SAC_AVG_32X 0x00000005 // 32x hardware oversampling #define ADC_SAC_AVG_64X 0x00000006 // 64x hardware oversampling //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_DCISC register. // //***************************************************************************** #define ADC_DCISC_DCINT7 0x00000080 // Digital Comparator 7 Interrupt // Status and Clear #define ADC_DCISC_DCINT6 0x00000040 // Digital Comparator 6 Interrupt // Status and Clear #define ADC_DCISC_DCINT5 0x00000020 // Digital Comparator 5 Interrupt // Status and Clear #define ADC_DCISC_DCINT4 0x00000010 // Digital Comparator 4 Interrupt // Status and Clear #define ADC_DCISC_DCINT3 0x00000008 // Digital Comparator 3 Interrupt // Status and Clear #define ADC_DCISC_DCINT2 0x00000004 // Digital Comparator 2 Interrupt // Status and Clear #define ADC_DCISC_DCINT1 0x00000002 // Digital Comparator 1 Interrupt // Status and Clear #define ADC_DCISC_DCINT0 0x00000001 // Digital Comparator 0 Interrupt // Status and Clear //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_CTL register. // //***************************************************************************** #define ADC_CTL_RES 0x00000010 // Sample Resolution #define ADC_CTL_VREF_M 0x00000003 // Voltage Reference Select #define ADC_CTL_VREF_INTERNAL 0x00000000 // The internal reference as the // voltage reference #define ADC_CTL_VREF_EXT_3V 0x00000001 // A 3.0 V external VREFA input is // the voltage reference. The ADC // conversion range is 0.0 V to the // external reference value #define ADC_CTL_VREF_EXT_1V 0x00000003 // A 1.0 V external VREFA input is // the voltage reference. The ADC // conversion range is 0.0 V to // three times the external // reference value #define ADC_CTL_VREF 0x00000001 // Voltage Reference Select //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_SSMUX0 register. // //***************************************************************************** #define ADC_SSMUX0_MUX7_M 0xF0000000 // 8th Sample Input Select #define ADC_SSMUX0_MUX6_M 0x0F000000 // 7th Sample Input Select #define ADC_SSMUX0_MUX5_M 0x00F00000 // 6th Sample Input Select #define ADC_SSMUX0_MUX4_M 0x000F0000 // 5th Sample Input Select #define ADC_SSMUX0_MUX3_M 0x0000F000 // 4th Sample Input Select #define ADC_SSMUX0_MUX2_M 0x00000F00 // 3rd Sample Input Select #define ADC_SSMUX0_MUX1_M 0x000000F0 // 2nd Sample Input Select #define ADC_SSMUX0_MUX0_M 0x0000000F // 1st Sample Input Select #define ADC_SSMUX0_MUX7_S 28 #define ADC_SSMUX0_MUX6_S 24 #define ADC_SSMUX0_MUX5_S 20 #define ADC_SSMUX0_MUX4_S 16 #define ADC_SSMUX0_MUX3_S 12 #define ADC_SSMUX0_MUX2_S 8 #define ADC_SSMUX0_MUX1_S 4 #define ADC_SSMUX0_MUX0_S 0 //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_SSCTL0 register. // //***************************************************************************** #define ADC_SSCTL0_TS7 0x80000000 // 8th Sample Temp Sensor Select #define ADC_SSCTL0_IE7 0x40000000 // 8th Sample Interrupt Enable #define ADC_SSCTL0_END7 0x20000000 // 8th Sample is End of Sequence #define ADC_SSCTL0_D7 0x10000000 // 8th Sample Diff Input Select #define ADC_SSCTL0_TS6 0x08000000 // 7th Sample Temp Sensor Select #define ADC_SSCTL0_IE6 0x04000000 // 7th Sample Interrupt Enable #define ADC_SSCTL0_END6 0x02000000 // 7th Sample is End of Sequence #define ADC_SSCTL0_D6 0x01000000 // 7th Sample Diff Input Select #define ADC_SSCTL0_TS5 0x00800000 // 6th Sample Temp Sensor Select #define ADC_SSCTL0_IE5 0x00400000 // 6th Sample Interrupt Enable #define ADC_SSCTL0_END5 0x00200000 // 6th Sample is End of Sequence #define ADC_SSCTL0_D5 0x00100000 // 6th Sample Diff Input Select #define ADC_SSCTL0_TS4 0x00080000 // 5th Sample Temp Sensor Select #define ADC_SSCTL0_IE4 0x00040000 // 5th Sample Interrupt Enable #define ADC_SSCTL0_END4 0x00020000 // 5th Sample is End of Sequence #define ADC_SSCTL0_D4 0x00010000 // 5th Sample Diff Input Select #define ADC_SSCTL0_TS3 0x00008000 // 4th Sample Temp Sensor Select #define ADC_SSCTL0_IE3 0x00004000 // 4th Sample Interrupt Enable #define ADC_SSCTL0_END3 0x00002000 // 4th Sample is End of Sequence #define ADC_SSCTL0_D3 0x00001000 // 4th Sample Diff Input Select #define ADC_SSCTL0_TS2 0x00000800 // 3rd Sample Temp Sensor Select #define ADC_SSCTL0_IE2 0x00000400 // 3rd Sample Interrupt Enable #define ADC_SSCTL0_END2 0x00000200 // 3rd Sample is End of Sequence #define ADC_SSCTL0_D2 0x00000100 // 3rd Sample Diff Input Select #define ADC_SSCTL0_TS1 0x00000080 // 2nd Sample Temp Sensor Select #define ADC_SSCTL0_IE1 0x00000040 // 2nd Sample Interrupt Enable #define ADC_SSCTL0_END1 0x00000020 // 2nd Sample is End of Sequence #define ADC_SSCTL0_D1 0x00000010 // 2nd Sample Diff Input Select #define ADC_SSCTL0_TS0 0x00000008 // 1st Sample Temp Sensor Select #define ADC_SSCTL0_IE0 0x00000004 // 1st Sample Interrupt Enable #define ADC_SSCTL0_END0 0x00000002 // 1st Sample is End of Sequence #define ADC_SSCTL0_D0 0x00000001 // 1st Sample Diff Input Select //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_SSFIFO0 register. // //***************************************************************************** #define ADC_SSFIFO0_DATA_M 0x00000FFF // Conversion Result Data #define ADC_SSFIFO0_DATA_S 0 //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_SSFSTAT0 register. // //***************************************************************************** #define ADC_SSFSTAT0_FULL 0x00001000 // FIFO Full #define ADC_SSFSTAT0_EMPTY 0x00000100 // FIFO Empty #define ADC_SSFSTAT0_HPTR_M 0x000000F0 // FIFO Head Pointer #define ADC_SSFSTAT0_TPTR_M 0x0000000F // FIFO Tail Pointer #define ADC_SSFSTAT0_HPTR_S 4 #define ADC_SSFSTAT0_TPTR_S 0 //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_SSOP0 register. // //***************************************************************************** #define ADC_SSOP0_S7DCOP 0x10000000 // Sample 7 Digital Comparator // Operation #define ADC_SSOP0_S6DCOP 0x01000000 // Sample 6 Digital Comparator // Operation #define ADC_SSOP0_S5DCOP 0x00100000 // Sample 5 Digital Comparator // Operation #define ADC_SSOP0_S4DCOP 0x00010000 // Sample 4 Digital Comparator // Operation #define ADC_SSOP0_S3DCOP 0x00001000 // Sample 3 Digital Comparator // Operation #define ADC_SSOP0_S2DCOP 0x00000100 // Sample 2 Digital Comparator // Operation #define ADC_SSOP0_S1DCOP 0x00000010 // Sample 1 Digital Comparator // Operation #define ADC_SSOP0_S0DCOP 0x00000001 // Sample 0 Digital Comparator // Operation //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_SSDC0 register. // //***************************************************************************** #define ADC_SSDC0_S7DCSEL_M 0xF0000000 // Sample 7 Digital Comparator // Select #define ADC_SSDC0_S6DCSEL_M 0x0F000000 // Sample 6 Digital Comparator // Select #define ADC_SSDC0_S5DCSEL_M 0x00F00000 // Sample 5 Digital Comparator // Select #define ADC_SSDC0_S4DCSEL_M 0x000F0000 // Sample 4 Digital Comparator // Select #define ADC_SSDC0_S3DCSEL_M 0x0000F000 // Sample 3 Digital Comparator // Select #define ADC_SSDC0_S2DCSEL_M 0x00000F00 // Sample 2 Digital Comparator // Select #define ADC_SSDC0_S1DCSEL_M 0x000000F0 // Sample 1 Digital Comparator // Select #define ADC_SSDC0_S0DCSEL_M 0x0000000F // Sample 0 Digital Comparator // Select #define ADC_SSDC0_S6DCSEL_S 24 #define ADC_SSDC0_S5DCSEL_S 20 #define ADC_SSDC0_S4DCSEL_S 16 #define ADC_SSDC0_S3DCSEL_S 12 #define ADC_SSDC0_S2DCSEL_S 8 #define ADC_SSDC0_S1DCSEL_S 4 #define ADC_SSDC0_S0DCSEL_S 0 //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_SSEMUX0 register. // //***************************************************************************** #define ADC_SSEMUX0_EMUX7 0x10000000 // 8th Sample Input Select (Upper // Bit) #define ADC_SSEMUX0_EMUX6 0x01000000 // 7th Sample Input Select (Upper // Bit) #define ADC_SSEMUX0_EMUX5 0x00100000 // 6th Sample Input Select (Upper // Bit) #define ADC_SSEMUX0_EMUX4 0x00010000 // 5th Sample Input Select (Upper // Bit) #define ADC_SSEMUX0_EMUX3 0x00001000 // 4th Sample Input Select (Upper // Bit) #define ADC_SSEMUX0_EMUX2 0x00000100 // 3rd Sample Input Select (Upper // Bit) #define ADC_SSEMUX0_EMUX1 0x00000010 // 2th Sample Input Select (Upper // Bit) #define ADC_SSEMUX0_EMUX0 0x00000001 // 1st Sample Input Select (Upper // Bit) //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_SSMUX1 register. // //***************************************************************************** #define ADC_SSMUX1_MUX3_M 0x0000F000 // 4th Sample Input Select #define ADC_SSMUX1_MUX2_M 0x00000F00 // 3rd Sample Input Select #define ADC_SSMUX1_MUX1_M 0x000000F0 // 2nd Sample Input Select #define ADC_SSMUX1_MUX0_M 0x0000000F // 1st Sample Input Select #define ADC_SSMUX1_MUX3_S 12 #define ADC_SSMUX1_MUX2_S 8 #define ADC_SSMUX1_MUX1_S 4 #define ADC_SSMUX1_MUX0_S 0 //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_SSCTL1 register. // //***************************************************************************** #define ADC_SSCTL1_TS3 0x00008000 // 4th Sample Temp Sensor Select #define ADC_SSCTL1_IE3 0x00004000 // 4th Sample Interrupt Enable #define ADC_SSCTL1_END3 0x00002000 // 4th Sample is End of Sequence #define ADC_SSCTL1_D3 0x00001000 // 4th Sample Diff Input Select #define ADC_SSCTL1_TS2 0x00000800 // 3rd Sample Temp Sensor Select #define ADC_SSCTL1_IE2 0x00000400 // 3rd Sample Interrupt Enable #define ADC_SSCTL1_END2 0x00000200 // 3rd Sample is End of Sequence #define ADC_SSCTL1_D2 0x00000100 // 3rd Sample Diff Input Select #define ADC_SSCTL1_TS1 0x00000080 // 2nd Sample Temp Sensor Select #define ADC_SSCTL1_IE1 0x00000040 // 2nd Sample Interrupt Enable #define ADC_SSCTL1_END1 0x00000020 // 2nd Sample is End of Sequence #define ADC_SSCTL1_D1 0x00000010 // 2nd Sample Diff Input Select #define ADC_SSCTL1_TS0 0x00000008 // 1st Sample Temp Sensor Select #define ADC_SSCTL1_IE0 0x00000004 // 1st Sample Interrupt Enable #define ADC_SSCTL1_END0 0x00000002 // 1st Sample is End of Sequence #define ADC_SSCTL1_D0 0x00000001 // 1st Sample Diff Input Select //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_SSFIFO1 register. // //***************************************************************************** #define ADC_SSFIFO1_DATA_M 0x00000FFF // Conversion Result Data #define ADC_SSFIFO1_DATA_S 0 //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_SSFSTAT1 register. // //***************************************************************************** #define ADC_SSFSTAT1_FULL 0x00001000 // FIFO Full #define ADC_SSFSTAT1_EMPTY 0x00000100 // FIFO Empty #define ADC_SSFSTAT1_HPTR_M 0x000000F0 // FIFO Head Pointer #define ADC_SSFSTAT1_TPTR_M 0x0000000F // FIFO Tail Pointer #define ADC_SSFSTAT1_HPTR_S 4 #define ADC_SSFSTAT1_TPTR_S 0 //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_SSOP1 register. // //***************************************************************************** #define ADC_SSOP1_S3DCOP 0x00001000 // Sample 3 Digital Comparator // Operation #define ADC_SSOP1_S2DCOP 0x00000100 // Sample 2 Digital Comparator // Operation #define ADC_SSOP1_S1DCOP 0x00000010 // Sample 1 Digital Comparator // Operation #define ADC_SSOP1_S0DCOP 0x00000001 // Sample 0 Digital Comparator // Operation //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_SSDC1 register. // //***************************************************************************** #define ADC_SSDC1_S3DCSEL_M 0x0000F000 // Sample 3 Digital Comparator // Select #define ADC_SSDC1_S2DCSEL_M 0x00000F00 // Sample 2 Digital Comparator // Select #define ADC_SSDC1_S1DCSEL_M 0x000000F0 // Sample 1 Digital Comparator // Select #define ADC_SSDC1_S0DCSEL_M 0x0000000F // Sample 0 Digital Comparator // Select #define ADC_SSDC1_S2DCSEL_S 8 #define ADC_SSDC1_S1DCSEL_S 4 #define ADC_SSDC1_S0DCSEL_S 0 //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_SSEMUX1 register. // //***************************************************************************** #define ADC_SSEMUX1_EMUX3 0x00001000 // 4th Sample Input Select (Upper // Bit) #define ADC_SSEMUX1_EMUX2 0x00000100 // 3rd Sample Input Select (Upper // Bit) #define ADC_SSEMUX1_EMUX1 0x00000010 // 2th Sample Input Select (Upper // Bit) #define ADC_SSEMUX1_EMUX0 0x00000001 // 1st Sample Input Select (Upper // Bit) //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_SSMUX2 register. // //***************************************************************************** #define ADC_SSMUX2_MUX3_M 0x0000F000 // 4th Sample Input Select #define ADC_SSMUX2_MUX2_M 0x00000F00 // 3rd Sample Input Select #define ADC_SSMUX2_MUX1_M 0x000000F0 // 2nd Sample Input Select #define ADC_SSMUX2_MUX0_M 0x0000000F // 1st Sample Input Select #define ADC_SSMUX2_MUX3_S 12 #define ADC_SSMUX2_MUX2_S 8 #define ADC_SSMUX2_MUX1_S 4 #define ADC_SSMUX2_MUX0_S 0 //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_SSCTL2 register. // //***************************************************************************** #define ADC_SSCTL2_TS3 0x00008000 // 4th Sample Temp Sensor Select #define ADC_SSCTL2_IE3 0x00004000 // 4th Sample Interrupt Enable #define ADC_SSCTL2_END3 0x00002000 // 4th Sample is End of Sequence #define ADC_SSCTL2_D3 0x00001000 // 4th Sample Diff Input Select #define ADC_SSCTL2_TS2 0x00000800 // 3rd Sample Temp Sensor Select #define ADC_SSCTL2_IE2 0x00000400 // 3rd Sample Interrupt Enable #define ADC_SSCTL2_END2 0x00000200 // 3rd Sample is End of Sequence #define ADC_SSCTL2_D2 0x00000100 // 3rd Sample Diff Input Select #define ADC_SSCTL2_TS1 0x00000080 // 2nd Sample Temp Sensor Select #define ADC_SSCTL2_IE1 0x00000040 // 2nd Sample Interrupt Enable #define ADC_SSCTL2_END1 0x00000020 // 2nd Sample is End of Sequence #define ADC_SSCTL2_D1 0x00000010 // 2nd Sample Diff Input Select #define ADC_SSCTL2_TS0 0x00000008 // 1st Sample Temp Sensor Select #define ADC_SSCTL2_IE0 0x00000004 // 1st Sample Interrupt Enable #define ADC_SSCTL2_END0 0x00000002 // 1st Sample is End of Sequence #define ADC_SSCTL2_D0 0x00000001 // 1st Sample Diff Input Select //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_SSFIFO2 register. // //***************************************************************************** #define ADC_SSFIFO2_DATA_M 0x00000FFF // Conversion Result Data #define ADC_SSFIFO2_DATA_S 0 //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_SSFSTAT2 register. // //***************************************************************************** #define ADC_SSFSTAT2_FULL 0x00001000 // FIFO Full #define ADC_SSFSTAT2_EMPTY 0x00000100 // FIFO Empty #define ADC_SSFSTAT2_HPTR_M 0x000000F0 // FIFO Head Pointer #define ADC_SSFSTAT2_TPTR_M 0x0000000F // FIFO Tail Pointer #define ADC_SSFSTAT2_HPTR_S 4 #define ADC_SSFSTAT2_TPTR_S 0 //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_SSOP2 register. // //***************************************************************************** #define ADC_SSOP2_S3DCOP 0x00001000 // Sample 3 Digital Comparator // Operation #define ADC_SSOP2_S2DCOP 0x00000100 // Sample 2 Digital Comparator // Operation #define ADC_SSOP2_S1DCOP 0x00000010 // Sample 1 Digital Comparator // Operation #define ADC_SSOP2_S0DCOP 0x00000001 // Sample 0 Digital Comparator // Operation //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_SSDC2 register. // //***************************************************************************** #define ADC_SSDC2_S3DCSEL_M 0x0000F000 // Sample 3 Digital Comparator // Select #define ADC_SSDC2_S2DCSEL_M 0x00000F00 // Sample 2 Digital Comparator // Select #define ADC_SSDC2_S1DCSEL_M 0x000000F0 // Sample 1 Digital Comparator // Select #define ADC_SSDC2_S0DCSEL_M 0x0000000F // Sample 0 Digital Comparator // Select #define ADC_SSDC2_S2DCSEL_S 8 #define ADC_SSDC2_S1DCSEL_S 4 #define ADC_SSDC2_S0DCSEL_S 0 //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_SSEMUX2 register. // //***************************************************************************** #define ADC_SSEMUX2_EMUX3 0x00001000 // 4th Sample Input Select (Upper // Bit) #define ADC_SSEMUX2_EMUX2 0x00000100 // 3rd Sample Input Select (Upper // Bit) #define ADC_SSEMUX2_EMUX1 0x00000010 // 2th Sample Input Select (Upper // Bit) #define ADC_SSEMUX2_EMUX0 0x00000001 // 1st Sample Input Select (Upper // Bit) //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_SSMUX3 register. // //***************************************************************************** #define ADC_SSMUX3_MUX0_M 0x0000000F // 1st Sample Input Select #define ADC_SSMUX3_MUX0_S 0 //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_SSCTL3 register. // //***************************************************************************** #define ADC_SSCTL3_TS0 0x00000008 // 1st Sample Temp Sensor Select #define ADC_SSCTL3_IE0 0x00000004 // 1st Sample Interrupt Enable #define ADC_SSCTL3_END0 0x00000002 // 1st Sample is End of Sequence #define ADC_SSCTL3_D0 0x00000001 // 1st Sample Diff Input Select //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_SSFIFO3 register. // //***************************************************************************** #define ADC_SSFIFO3_DATA_M 0x00000FFF // Conversion Result Data #define ADC_SSFIFO3_DATA_S 0 //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_SSFSTAT3 register. // //***************************************************************************** #define ADC_SSFSTAT3_FULL 0x00001000 // FIFO Full #define ADC_SSFSTAT3_EMPTY 0x00000100 // FIFO Empty #define ADC_SSFSTAT3_HPTR_M 0x000000F0 // FIFO Head Pointer #define ADC_SSFSTAT3_TPTR_M 0x0000000F // FIFO Tail Pointer #define ADC_SSFSTAT3_HPTR_S 4 #define ADC_SSFSTAT3_TPTR_S 0 //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_SSOP3 register. // //***************************************************************************** #define ADC_SSOP3_S0DCOP 0x00000001 // Sample 0 Digital Comparator // Operation //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_SSDC3 register. // //***************************************************************************** #define ADC_SSDC3_S0DCSEL_M 0x0000000F // Sample 0 Digital Comparator // Select //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_SSEMUX3 register. // //***************************************************************************** #define ADC_SSEMUX3_EMUX0 0x00000001 // 1st Sample Input Select (Upper // Bit) //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_TMLB register. // //***************************************************************************** #define ADC_TMLB_LB 0x00000001 // Loopback Mode Enable //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_DCRIC register. // //***************************************************************************** #define ADC_DCRIC_DCTRIG7 0x00800000 // Digital Comparator Trigger 7 #define ADC_DCRIC_DCTRIG6 0x00400000 // Digital Comparator Trigger 6 #define ADC_DCRIC_DCTRIG5 0x00200000 // Digital Comparator Trigger 5 #define ADC_DCRIC_DCTRIG4 0x00100000 // Digital Comparator Trigger 4 #define ADC_DCRIC_DCTRIG3 0x00080000 // Digital Comparator Trigger 3 #define ADC_DCRIC_DCTRIG2 0x00040000 // Digital Comparator Trigger 2 #define ADC_DCRIC_DCTRIG1 0x00020000 // Digital Comparator Trigger 1 #define ADC_DCRIC_DCTRIG0 0x00010000 // Digital Comparator Trigger 0 #define ADC_DCRIC_DCINT7 0x00000080 // Digital Comparator Interrupt 7 #define ADC_DCRIC_DCINT6 0x00000040 // Digital Comparator Interrupt 6 #define ADC_DCRIC_DCINT5 0x00000020 // Digital Comparator Interrupt 5 #define ADC_DCRIC_DCINT4 0x00000010 // Digital Comparator Interrupt 4 #define ADC_DCRIC_DCINT3 0x00000008 // Digital Comparator Interrupt 3 #define ADC_DCRIC_DCINT2 0x00000004 // Digital Comparator Interrupt 2 #define ADC_DCRIC_DCINT1 0x00000002 // Digital Comparator Interrupt 1 #define ADC_DCRIC_DCINT0 0x00000001 // Digital Comparator Interrupt 0 //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_DCCTL0 register. // //***************************************************************************** #define ADC_DCCTL0_CTE 0x00001000 // Comparison Trigger Enable #define ADC_DCCTL0_CTC_M 0x00000C00 // Comparison Trigger Condition #define ADC_DCCTL0_CTC_LOW 0x00000000 // Low Band #define ADC_DCCTL0_CTC_MID 0x00000400 // Mid Band #define ADC_DCCTL0_CTC_HIGH 0x00000C00 // High Band #define ADC_DCCTL0_CTM_M 0x00000300 // Comparison Trigger Mode #define ADC_DCCTL0_CTM_ALWAYS 0x00000000 // Always #define ADC_DCCTL0_CTM_ONCE 0x00000100 // Once #define ADC_DCCTL0_CTM_HALWAYS 0x00000200 // Hysteresis Always #define ADC_DCCTL0_CTM_HONCE 0x00000300 // Hysteresis Once #define ADC_DCCTL0_CIE 0x00000010 // Comparison Interrupt Enable #define ADC_DCCTL0_CIC_M 0x0000000C // Comparison Interrupt Condition #define ADC_DCCTL0_CIC_LOW 0x00000000 // Low Band #define ADC_DCCTL0_CIC_MID 0x00000004 // Mid Band #define ADC_DCCTL0_CIC_HIGH 0x0000000C // High Band #define ADC_DCCTL0_CIM_M 0x00000003 // Comparison Interrupt Mode #define ADC_DCCTL0_CIM_ALWAYS 0x00000000 // Always #define ADC_DCCTL0_CIM_ONCE 0x00000001 // Once #define ADC_DCCTL0_CIM_HALWAYS 0x00000002 // Hysteresis Always #define ADC_DCCTL0_CIM_HONCE 0x00000003 // Hysteresis Once //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_DCCTL1 register. // //***************************************************************************** #define ADC_DCCTL1_CTE 0x00001000 // Comparison Trigger Enable #define ADC_DCCTL1_CTC_M 0x00000C00 // Comparison Trigger Condition #define ADC_DCCTL1_CTC_LOW 0x00000000 // Low Band #define ADC_DCCTL1_CTC_MID 0x00000400 // Mid Band #define ADC_DCCTL1_CTC_HIGH 0x00000C00 // High Band #define ADC_DCCTL1_CTM_M 0x00000300 // Comparison Trigger Mode #define ADC_DCCTL1_CTM_ALWAYS 0x00000000 // Always #define ADC_DCCTL1_CTM_ONCE 0x00000100 // Once #define ADC_DCCTL1_CTM_HALWAYS 0x00000200 // Hysteresis Always #define ADC_DCCTL1_CTM_HONCE 0x00000300 // Hysteresis Once #define ADC_DCCTL1_CIE 0x00000010 // Comparison Interrupt Enable #define ADC_DCCTL1_CIC_M 0x0000000C // Comparison Interrupt Condition #define ADC_DCCTL1_CIC_LOW 0x00000000 // Low Band #define ADC_DCCTL1_CIC_MID 0x00000004 // Mid Band #define ADC_DCCTL1_CIC_HIGH 0x0000000C // High Band #define ADC_DCCTL1_CIM_M 0x00000003 // Comparison Interrupt Mode #define ADC_DCCTL1_CIM_ALWAYS 0x00000000 // Always #define ADC_DCCTL1_CIM_ONCE 0x00000001 // Once #define ADC_DCCTL1_CIM_HALWAYS 0x00000002 // Hysteresis Always #define ADC_DCCTL1_CIM_HONCE 0x00000003 // Hysteresis Once //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_DCCTL2 register. // //***************************************************************************** #define ADC_DCCTL2_CTE 0x00001000 // Comparison Trigger Enable #define ADC_DCCTL2_CTC_M 0x00000C00 // Comparison Trigger Condition #define ADC_DCCTL2_CTC_LOW 0x00000000 // Low Band #define ADC_DCCTL2_CTC_MID 0x00000400 // Mid Band #define ADC_DCCTL2_CTC_HIGH 0x00000C00 // High Band #define ADC_DCCTL2_CTM_M 0x00000300 // Comparison Trigger Mode #define ADC_DCCTL2_CTM_ALWAYS 0x00000000 // Always #define ADC_DCCTL2_CTM_ONCE 0x00000100 // Once #define ADC_DCCTL2_CTM_HALWAYS 0x00000200 // Hysteresis Always #define ADC_DCCTL2_CTM_HONCE 0x00000300 // Hysteresis Once #define ADC_DCCTL2_CIE 0x00000010 // Comparison Interrupt Enable #define ADC_DCCTL2_CIC_M 0x0000000C // Comparison Interrupt Condition #define ADC_DCCTL2_CIC_LOW 0x00000000 // Low Band #define ADC_DCCTL2_CIC_MID 0x00000004 // Mid Band #define ADC_DCCTL2_CIC_HIGH 0x0000000C // High Band #define ADC_DCCTL2_CIM_M 0x00000003 // Comparison Interrupt Mode #define ADC_DCCTL2_CIM_ALWAYS 0x00000000 // Always #define ADC_DCCTL2_CIM_ONCE 0x00000001 // Once #define ADC_DCCTL2_CIM_HALWAYS 0x00000002 // Hysteresis Always #define ADC_DCCTL2_CIM_HONCE 0x00000003 // Hysteresis Once //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_DCCTL3 register. // //***************************************************************************** #define ADC_DCCTL3_CTE 0x00001000 // Comparison Trigger Enable #define ADC_DCCTL3_CTC_M 0x00000C00 // Comparison Trigger Condition #define ADC_DCCTL3_CTC_LOW 0x00000000 // Low Band #define ADC_DCCTL3_CTC_MID 0x00000400 // Mid Band #define ADC_DCCTL3_CTC_HIGH 0x00000C00 // High Band #define ADC_DCCTL3_CTM_M 0x00000300 // Comparison Trigger Mode #define ADC_DCCTL3_CTM_ALWAYS 0x00000000 // Always #define ADC_DCCTL3_CTM_ONCE 0x00000100 // Once #define ADC_DCCTL3_CTM_HALWAYS 0x00000200 // Hysteresis Always #define ADC_DCCTL3_CTM_HONCE 0x00000300 // Hysteresis Once #define ADC_DCCTL3_CIE 0x00000010 // Comparison Interrupt Enable #define ADC_DCCTL3_CIC_M 0x0000000C // Comparison Interrupt Condition #define ADC_DCCTL3_CIC_LOW 0x00000000 // Low Band #define ADC_DCCTL3_CIC_MID 0x00000004 // Mid Band #define ADC_DCCTL3_CIC_HIGH 0x0000000C // High Band #define ADC_DCCTL3_CIM_M 0x00000003 // Comparison Interrupt Mode #define ADC_DCCTL3_CIM_ALWAYS 0x00000000 // Always #define ADC_DCCTL3_CIM_ONCE 0x00000001 // Once #define ADC_DCCTL3_CIM_HALWAYS 0x00000002 // Hysteresis Always #define ADC_DCCTL3_CIM_HONCE 0x00000003 // Hysteresis Once //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_DCCTL4 register. // //***************************************************************************** #define ADC_DCCTL4_CTE 0x00001000 // Comparison Trigger Enable #define ADC_DCCTL4_CTC_M 0x00000C00 // Comparison Trigger Condition #define ADC_DCCTL4_CTC_LOW 0x00000000 // Low Band #define ADC_DCCTL4_CTC_MID 0x00000400 // Mid Band #define ADC_DCCTL4_CTC_HIGH 0x00000C00 // High Band #define ADC_DCCTL4_CTM_M 0x00000300 // Comparison Trigger Mode #define ADC_DCCTL4_CTM_ALWAYS 0x00000000 // Always #define ADC_DCCTL4_CTM_ONCE 0x00000100 // Once #define ADC_DCCTL4_CTM_HALWAYS 0x00000200 // Hysteresis Always #define ADC_DCCTL4_CTM_HONCE 0x00000300 // Hysteresis Once #define ADC_DCCTL4_CIE 0x00000010 // Comparison Interrupt Enable #define ADC_DCCTL4_CIC_M 0x0000000C // Comparison Interrupt Condition #define ADC_DCCTL4_CIC_LOW 0x00000000 // Low Band #define ADC_DCCTL4_CIC_MID 0x00000004 // Mid Band #define ADC_DCCTL4_CIC_HIGH 0x0000000C // High Band #define ADC_DCCTL4_CIM_M 0x00000003 // Comparison Interrupt Mode #define ADC_DCCTL4_CIM_ALWAYS 0x00000000 // Always #define ADC_DCCTL4_CIM_ONCE 0x00000001 // Once #define ADC_DCCTL4_CIM_HALWAYS 0x00000002 // Hysteresis Always #define ADC_DCCTL4_CIM_HONCE 0x00000003 // Hysteresis Once //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_DCCTL5 register. // //***************************************************************************** #define ADC_DCCTL5_CTE 0x00001000 // Comparison Trigger Enable #define ADC_DCCTL5_CTC_M 0x00000C00 // Comparison Trigger Condition #define ADC_DCCTL5_CTC_LOW 0x00000000 // Low Band #define ADC_DCCTL5_CTC_MID 0x00000400 // Mid Band #define ADC_DCCTL5_CTC_HIGH 0x00000C00 // High Band #define ADC_DCCTL5_CTM_M 0x00000300 // Comparison Trigger Mode #define ADC_DCCTL5_CTM_ALWAYS 0x00000000 // Always #define ADC_DCCTL5_CTM_ONCE 0x00000100 // Once #define ADC_DCCTL5_CTM_HALWAYS 0x00000200 // Hysteresis Always #define ADC_DCCTL5_CTM_HONCE 0x00000300 // Hysteresis Once #define ADC_DCCTL5_CIE 0x00000010 // Comparison Interrupt Enable #define ADC_DCCTL5_CIC_M 0x0000000C // Comparison Interrupt Condition #define ADC_DCCTL5_CIC_LOW 0x00000000 // Low Band #define ADC_DCCTL5_CIC_MID 0x00000004 // Mid Band #define ADC_DCCTL5_CIC_HIGH 0x0000000C // High Band #define ADC_DCCTL5_CIM_M 0x00000003 // Comparison Interrupt Mode #define ADC_DCCTL5_CIM_ALWAYS 0x00000000 // Always #define ADC_DCCTL5_CIM_ONCE 0x00000001 // Once #define ADC_DCCTL5_CIM_HALWAYS 0x00000002 // Hysteresis Always #define ADC_DCCTL5_CIM_HONCE 0x00000003 // Hysteresis Once //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_DCCTL6 register. // //***************************************************************************** #define ADC_DCCTL6_CTE 0x00001000 // Comparison Trigger Enable #define ADC_DCCTL6_CTC_M 0x00000C00 // Comparison Trigger Condition #define ADC_DCCTL6_CTC_LOW 0x00000000 // Low Band #define ADC_DCCTL6_CTC_MID 0x00000400 // Mid Band #define ADC_DCCTL6_CTC_HIGH 0x00000C00 // High Band #define ADC_DCCTL6_CTM_M 0x00000300 // Comparison Trigger Mode #define ADC_DCCTL6_CTM_ALWAYS 0x00000000 // Always #define ADC_DCCTL6_CTM_ONCE 0x00000100 // Once #define ADC_DCCTL6_CTM_HALWAYS 0x00000200 // Hysteresis Always #define ADC_DCCTL6_CTM_HONCE 0x00000300 // Hysteresis Once #define ADC_DCCTL6_CIE 0x00000010 // Comparison Interrupt Enable #define ADC_DCCTL6_CIC_M 0x0000000C // Comparison Interrupt Condition #define ADC_DCCTL6_CIC_LOW 0x00000000 // Low Band #define ADC_DCCTL6_CIC_MID 0x00000004 // Mid Band #define ADC_DCCTL6_CIC_HIGH 0x0000000C // High Band #define ADC_DCCTL6_CIM_M 0x00000003 // Comparison Interrupt Mode #define ADC_DCCTL6_CIM_ALWAYS 0x00000000 // Always #define ADC_DCCTL6_CIM_ONCE 0x00000001 // Once #define ADC_DCCTL6_CIM_HALWAYS 0x00000002 // Hysteresis Always #define ADC_DCCTL6_CIM_HONCE 0x00000003 // Hysteresis Once //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_DCCTL7 register. // //***************************************************************************** #define ADC_DCCTL7_CTE 0x00001000 // Comparison Trigger Enable #define ADC_DCCTL7_CTC_M 0x00000C00 // Comparison Trigger Condition #define ADC_DCCTL7_CTC_LOW 0x00000000 // Low Band #define ADC_DCCTL7_CTC_MID 0x00000400 // Mid Band #define ADC_DCCTL7_CTC_HIGH 0x00000C00 // High Band #define ADC_DCCTL7_CTM_M 0x00000300 // Comparison Trigger Mode #define ADC_DCCTL7_CTM_ALWAYS 0x00000000 // Always #define ADC_DCCTL7_CTM_ONCE 0x00000100 // Once #define ADC_DCCTL7_CTM_HALWAYS 0x00000200 // Hysteresis Always #define ADC_DCCTL7_CTM_HONCE 0x00000300 // Hysteresis Once #define ADC_DCCTL7_CIE 0x00000010 // Comparison Interrupt Enable #define ADC_DCCTL7_CIC_M 0x0000000C // Comparison Interrupt Condition #define ADC_DCCTL7_CIC_LOW 0x00000000 // Low Band #define ADC_DCCTL7_CIC_MID 0x00000004 // Mid Band #define ADC_DCCTL7_CIC_HIGH 0x0000000C // High Band #define ADC_DCCTL7_CIM_M 0x00000003 // Comparison Interrupt Mode #define ADC_DCCTL7_CIM_ALWAYS 0x00000000 // Always #define ADC_DCCTL7_CIM_ONCE 0x00000001 // Once #define ADC_DCCTL7_CIM_HALWAYS 0x00000002 // Hysteresis Always #define ADC_DCCTL7_CIM_HONCE 0x00000003 // Hysteresis Once //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_DCCMP0 register. // //***************************************************************************** #define ADC_DCCMP0_COMP1_M 0x0FFF0000 // Compare 1 #define ADC_DCCMP0_COMP0_M 0x00000FFF // Compare 0 #define ADC_DCCMP0_COMP1_S 16 #define ADC_DCCMP0_COMP0_S 0 //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_DCCMP1 register. // //***************************************************************************** #define ADC_DCCMP1_COMP1_M 0x0FFF0000 // Compare 1 #define ADC_DCCMP1_COMP0_M 0x00000FFF // Compare 0 #define ADC_DCCMP1_COMP1_S 16 #define ADC_DCCMP1_COMP0_S 0 //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_DCCMP2 register. // //***************************************************************************** #define ADC_DCCMP2_COMP1_M 0x0FFF0000 // Compare 1 #define ADC_DCCMP2_COMP0_M 0x00000FFF // Compare 0 #define ADC_DCCMP2_COMP1_S 16 #define ADC_DCCMP2_COMP0_S 0 //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_DCCMP3 register. // //***************************************************************************** #define ADC_DCCMP3_COMP1_M 0x0FFF0000 // Compare 1 #define ADC_DCCMP3_COMP0_M 0x00000FFF // Compare 0 #define ADC_DCCMP3_COMP1_S 16 #define ADC_DCCMP3_COMP0_S 0 //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_DCCMP4 register. // //***************************************************************************** #define ADC_DCCMP4_COMP1_M 0x0FFF0000 // Compare 1 #define ADC_DCCMP4_COMP0_M 0x00000FFF // Compare 0 #define ADC_DCCMP4_COMP1_S 16 #define ADC_DCCMP4_COMP0_S 0 //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_DCCMP5 register. // //***************************************************************************** #define ADC_DCCMP5_COMP1_M 0x0FFF0000 // Compare 1 #define ADC_DCCMP5_COMP0_M 0x00000FFF // Compare 0 #define ADC_DCCMP5_COMP1_S 16 #define ADC_DCCMP5_COMP0_S 0 //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_DCCMP6 register. // //***************************************************************************** #define ADC_DCCMP6_COMP1_M 0x0FFF0000 // Compare 1 #define ADC_DCCMP6_COMP0_M 0x00000FFF // Compare 0 #define ADC_DCCMP6_COMP1_S 16 #define ADC_DCCMP6_COMP0_S 0 //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_DCCMP7 register. // //***************************************************************************** #define ADC_DCCMP7_COMP1_M 0x0FFF0000 // Compare 1 #define ADC_DCCMP7_COMP0_M 0x00000FFF // Compare 0 #define ADC_DCCMP7_COMP1_S 16 #define ADC_DCCMP7_COMP0_S 0 //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_PP register. // //***************************************************************************** #define ADC_PP_TS 0x00800000 // Temperature Sensor #define ADC_PP_RSL_M 0x007C0000 // Resolution #define ADC_PP_TYPE_M 0x00030000 // ADC Architecture #define ADC_PP_TYPE_SAR 0x00000000 // SAR #define ADC_PP_DC_M 0x0000FC00 // Digital Comparator Count #define ADC_PP_CH_M 0x000003F0 // ADC Channel Count #define ADC_PP_MSR_M 0x0000000F // Maximum ADC Sample Rate #define ADC_PP_MSR_125K 0x00000001 // 125 ksps #define ADC_PP_MSR_250K 0x00000003 // 250 ksps #define ADC_PP_MSR_500K 0x00000005 // 500 ksps #define ADC_PP_MSR_1M 0x00000007 // 1 Msps #define ADC_PP_RSL_S 18 #define ADC_PP_DC_S 10 #define ADC_PP_CH_S 4 //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_PC register. // //***************************************************************************** #define ADC_PC_SR_M 0x0000000F // ADC Sample Rate #define ADC_PC_SR_125K 0x00000001 // 125 ksps #define ADC_PC_SR_250K 0x00000003 // 250 ksps #define ADC_PC_SR_500K 0x00000005 // 500 ksps #define ADC_PC_SR_1M 0x00000007 // 1 Msps //***************************************************************************** // // The following are defines for the bit fields in the ADC_O_CC register. // //***************************************************************************** #define ADC_CC_CS_M 0x0000000F // ADC Clock Source #define ADC_CC_CS_SYSPLL 0x00000000 // Either the system clock (if the // PLL bypass is in effect) or the // 16 MHz clock derived from PLL / // 25 (default) #define ADC_CC_CS_PIOSC 0x00000001 // PIOSC //***************************************************************************** // // The following are defines for the the interpretation of the data in the // SSFIFOx when the ADC TMLB is enabled. // //***************************************************************************** #define ADC_SSFIFO_TMLB_CNT_M 0x000003C0 // Continuous Sample Counter #define ADC_SSFIFO_TMLB_CONT 0x00000020 // Continuation Sample Indicator #define ADC_SSFIFO_TMLB_DIFF 0x00000010 // Differential Sample Indicator #define ADC_SSFIFO_TMLB_TS 0x00000008 // Temp Sensor Sample Indicator #define ADC_SSFIFO_TMLB_MUX_M 0x00000007 // Analog Input Indicator #define ADC_SSFIFO_TMLB_CNT_S 6 // Sample counter shift #define ADC_SSFIFO_TMLB_MUX_S 0 // Input channel number shift //***************************************************************************** // // The following definitions are deprecated. // //***************************************************************************** #ifndef DEPRECATED //***************************************************************************** // // The following are deprecated defines for the bit fields in the ADC_O_EMUX // register. // //***************************************************************************** #define ADC_EMUX_EM3_MASK 0x0000F000 // Event mux 3 mask #define ADC_EMUX_EM2_MASK 0x00000F00 // Event mux 2 mask #define ADC_EMUX_EM1_MASK 0x000000F0 // Event mux 1 mask #define ADC_EMUX_EM0_MASK 0x0000000F // Event mux 0 mask #define ADC_EMUX_EM3_SHIFT 12 // The shift for the fourth event #define ADC_EMUX_EM2_SHIFT 8 // The shift for the third event #define ADC_EMUX_EM1_SHIFT 4 // The shift for the second event #define ADC_EMUX_EM0_SHIFT 0 // The shift for the first event //***************************************************************************** // // The following are deprecated defines for the bit fields in the ADC_O_SSPRI // register. // //***************************************************************************** #define ADC_SSPRI_SS3_MASK 0x00003000 // Sequencer 3 priority mask #define ADC_SSPRI_SS2_MASK 0x00000300 // Sequencer 2 priority mask #define ADC_SSPRI_SS1_MASK 0x00000030 // Sequencer 1 priority mask #define ADC_SSPRI_SS0_MASK 0x00000003 // Sequencer 0 priority mask //***************************************************************************** // // The following are deprecated defines for the ADC sequence register offsets.. // //***************************************************************************** #define ADC_O_SEQ 0x00000040 // Offset to the first sequence #define ADC_O_SEQ_STEP 0x00000020 // Increment to the next sequence #define ADC_O_X_SSFSTAT 0x0000000C // FIFO status register #define ADC_O_X_SSFIFO 0x00000008 // Result FIFO register #define ADC_O_X_SSCTL 0x00000004 // Sample sequence control register #define ADC_O_X_SSMUX 0x00000000 // Multiplexer select register //***************************************************************************** // // The following are deprecated defines for the bit fields in the ADC_SSMUX0, // ADC_SSMUX1, ADC_SSMUX2, and ADC_SSMUX3 registers. Not all fields are present // in all registers.. // //***************************************************************************** #define ADC_SSMUX_MUX7_MASK 0x70000000 // 8th mux select mask #define ADC_SSMUX_MUX6_MASK 0x07000000 // 7th mux select mask #define ADC_SSMUX_MUX5_MASK 0x00700000 // 6th mux select mask #define ADC_SSMUX_MUX4_MASK 0x00070000 // 5th mux select mask #define ADC_SSMUX_MUX3_MASK 0x00007000 // 4th mux select mask #define ADC_SSMUX_MUX2_MASK 0x00000700 // 3rd mux select mask #define ADC_SSMUX_MUX1_MASK 0x00000070 // 2nd mux select mask #define ADC_SSMUX_MUX0_MASK 0x00000007 // 1st mux select mask #define ADC_SSMUX_MUX7_SHIFT 28 #define ADC_SSMUX_MUX6_SHIFT 24 #define ADC_SSMUX_MUX5_SHIFT 20 #define ADC_SSMUX_MUX4_SHIFT 16 #define ADC_SSMUX_MUX3_SHIFT 12 #define ADC_SSMUX_MUX2_SHIFT 8 #define ADC_SSMUX_MUX1_SHIFT 4 #define ADC_SSMUX_MUX0_SHIFT 0 //***************************************************************************** // // The following are deprecated defines for the bit fields in the ADC_SSCTL0, // ADC_SSCTL1, ADC_SSCTL2, and ADC_SSCTL3 registers. Not all fields are present // in all registers. // //***************************************************************************** #define ADC_SSCTL_TS7 0x80000000 // 8th temperature sensor select #define ADC_SSCTL_IE7 0x40000000 // 8th interrupt enable #define ADC_SSCTL_END7 0x20000000 // 8th sequence end select #define ADC_SSCTL_D7 0x10000000 // 8th differential select #define ADC_SSCTL_TS6 0x08000000 // 7th temperature sensor select #define ADC_SSCTL_IE6 0x04000000 // 7th interrupt enable #define ADC_SSCTL_END6 0x02000000 // 7th sequence end select #define ADC_SSCTL_D6 0x01000000 // 7th differential select #define ADC_SSCTL_TS5 0x00800000 // 6th temperature sensor select #define ADC_SSCTL_IE5 0x00400000 // 6th interrupt enable #define ADC_SSCTL_END5 0x00200000 // 6th sequence end select #define ADC_SSCTL_D5 0x00100000 // 6th differential select #define ADC_SSCTL_TS4 0x00080000 // 5th temperature sensor select #define ADC_SSCTL_IE4 0x00040000 // 5th interrupt enable #define ADC_SSCTL_END4 0x00020000 // 5th sequence end select #define ADC_SSCTL_D4 0x00010000 // 5th differential select #define ADC_SSCTL_TS3 0x00008000 // 4th temperature sensor select #define ADC_SSCTL_IE3 0x00004000 // 4th interrupt enable #define ADC_SSCTL_END3 0x00002000 // 4th sequence end select #define ADC_SSCTL_D3 0x00001000 // 4th differential select #define ADC_SSCTL_TS2 0x00000800 // 3rd temperature sensor select #define ADC_SSCTL_IE2 0x00000400 // 3rd interrupt enable #define ADC_SSCTL_END2 0x00000200 // 3rd sequence end select #define ADC_SSCTL_D2 0x00000100 // 3rd differential select #define ADC_SSCTL_TS1 0x00000080 // 2nd temperature sensor select #define ADC_SSCTL_IE1 0x00000040 // 2nd interrupt enable #define ADC_SSCTL_END1 0x00000020 // 2nd sequence end select #define ADC_SSCTL_D1 0x00000010 // 2nd differential select #define ADC_SSCTL_TS0 0x00000008 // 1st temperature sensor select #define ADC_SSCTL_IE0 0x00000004 // 1st interrupt enable #define ADC_SSCTL_END0 0x00000002 // 1st sequence end select #define ADC_SSCTL_D0 0x00000001 // 1st differential select //***************************************************************************** // // The following are deprecated defines for the bit fields in the ADC_SSFIFO0, // ADC_SSFIFO1, ADC_SSFIFO2, and ADC_SSFIFO3 registers. // //***************************************************************************** #define ADC_SSFIFO_DATA_MASK 0x000003FF // Sample data #define ADC_SSFIFO_DATA_SHIFT 0 //***************************************************************************** // // The following are deprecated defines for the bit fields in the ADC_SSFSTAT0, // ADC_SSFSTAT1, ADC_SSFSTAT2, and ADC_SSFSTAT3 registers. // //***************************************************************************** #define ADC_SSFSTAT_FULL 0x00001000 // FIFO is full #define ADC_SSFSTAT_EMPTY 0x00000100 // FIFO is empty #define ADC_SSFSTAT_HPTR 0x000000F0 // FIFO head pointer #define ADC_SSFSTAT_TPTR 0x0000000F // FIFO tail pointer //***************************************************************************** // // The following are deprecated defines for the the interpretation of the data // in the SSFIFOx when the ADC TMLB is enabled. // //***************************************************************************** #define ADC_TMLB_CNT_M 0x000003C0 // Continuous Sample Counter #define ADC_TMLB_CONT 0x00000020 // Continuation Sample Indicator #define ADC_TMLB_DIFF 0x00000010 // Differential Sample Indicator #define ADC_TMLB_TS 0x00000008 // Temp Sensor Sample Indicator #define ADC_TMLB_MUX_M 0x00000007 // Analog Input Indicator #define ADC_TMLB_CNT_S 6 // Sample counter shift #define ADC_TMLB_MUX_S 0 // Input channel number shift //***************************************************************************** // // The following are deprecated defines for the bit fields in the loopback ADC // data. // //***************************************************************************** #define ADC_LB_CNT_MASK 0x000003C0 // Sample counter mask #define ADC_LB_CONT 0x00000020 // Continuation sample #define ADC_LB_DIFF 0x00000010 // Differential sample #define ADC_LB_TS 0x00000008 // Temperature sensor sample #define ADC_LB_MUX_MASK 0x00000007 // Input channel number mask #define ADC_LB_CNT_SHIFT 6 // Sample counter shift #define ADC_LB_MUX_SHIFT 0 // Input channel number shift #endif #endif // __HW_ADC_H__