//***************************************************************************** // // peci.h - Prototypes for Platform Environment Control Interface (PECI) // driver. // // Copyright (c) 2010-2011 Texas Instruments Incorporated. All rights reserved. // Software License Agreement // // Texas Instruments (TI) is supplying this software for use solely and // exclusively on TI's microcontroller products. The software is owned by // TI and/or its suppliers, and is protected under applicable copyright // laws. You may not combine this software with "viral" open-source // software in order to form a larger program. // // THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS. // NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT // NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR // A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY // CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL // DAMAGES, FOR ANY REASON WHATSOEVER. // // This is part of revision 8049 of the Stellaris Peripheral Driver Library. // //***************************************************************************** #ifndef __PECI_H__ #define __PECI_H__ //***************************************************************************** // // If building with a C++ compiler, make all of the definitions in this header // have a C binding. // //***************************************************************************** #ifdef __cplusplus extern "C" { #endif //***************************************************************************** // // Values that can be passed to PECIConfigDomain, PECIEnableDomain, // PECIDisableDomain, PECIReadDomainValue, PECIReadDomainMax, and // PECIClearDomain as the ulDomain parameter. // //***************************************************************************** #define PECI_DOMAIN_M0D0 0 // Microprocessor 0 / Domain 0 #define PECI_DOMAIN_M0D1 1 // Microprocessor 0 / Domain 1 #define PECI_DOMAIN_M1D0 2 // Microprocessor 1 / Domain 0 #define PECI_DOMAIN_M1D1 3 // Microprocessor 1 / Domain 1 //***************************************************************************** // // Values that can be passed to PECIIntEnable, PECIIntDisable, and PECIIntClear // as the ulIntFlags parameter and returned by PECIIntStatus. // //***************************************************************************** #define PECI_READ 0x00000001 // End of PECI Poll #define PECI_ERR 0x00000002 // Error on PECI Poll #define PECI_AC 0x00000004 // Advanced Command Complete #define PECI_M0D0 0x00030000 // Microprocessor 0 / Domain 0 #define PECI_M0D1 0x000C0000 // Microprocessor 0 / Domain 1 #define PECI_M1D0 0x00300000 // Microprocessor 1 / Domain 0 #define PECI_M1D1 0x00C00000 // Microprocessor 1 / Domain 1 //***************************************************************************** // // Additional values that can be returned by PECIIntStatus. // //***************************************************************************** #define PECI_M0D0_MODE1_HIGH 0x00030000 // Microprocessor 0 / Domain 0 // Mode 1 // Temperature IS above HIGH #define PECI_M0D0_MODE2_MID 0x00020000 // Microprocessor 0 / Domain 0 // Mode 2 // Temperature CROSSED above LOW #define PECI_M0D0_MODE2_HIGH 0x00030000 // Microprocessor 0 / Domain 0 // Mode 2 // Temperature CROSSED above HIGH #define PECI_M0D0_MODE3_LOW 0x00010000 // Microprocessor 0 / Domain 0 // Mode 3 // Temperature CROSSED below LOW #define PECI_M0D0_MODE3_MID 0x00020000 // Microprocessor 0 / Domain 0 // Mode 3 // Temperature CROSSED above LOW or // Temperature CROSSED below HIGH #define PECI_M0D0_MODE3_HIGH 0x00030000 // Microprocessor 0 / Domain 0 // Mode 3 // Temperature CROSSED above HIGH #define PECI_M0D1_MODE1_HIGH 0x00030000 // Microprocessor 0 / Domain 1 // Mode 1 // Temperature IS above HIGH #define PECI_M0D1_MODE2_MID 0x00020000 // Microprocessor 0 / Domain 1 // Mode 2 // Temperature CROSSED above LOW #define PECI_M0D1_MODE2_HIGH 0x00030000 // Microprocessor 0 / Domain 1 // Mode 2 // Temperature CROSSED above HIGH #define PECI_M0D1_MODE3_LOW 0x00010000 // Microprocessor 0 / Domain 1 // Mode 3 // Temperature CROSSED below LOW #define PECI_M0D1_MODE3_MID 0x00020000 // Microprocessor 0 / Domain 1 // Mode 3 // Temperature CROSSED above LOW or // Temperature CROSSED below HIGH #define PECI_M0D1_MODE3_HIGH 0x00030000 // Microprocessor 0 / Domain 1 // Mode 3 // Temperature CROSSED above HIGH #define PECI_M1D0_MODE1_HIGH 0x00030000 // Microprocessor 1 / Domain 0 // Mode 1 // Temperature IS above HIGH #define PECI_M1D0_MODE2_MID 0x00020000 // Microprocessor 1 / Domain 0 // Mode 2 // Temperature CROSSED above LOW #define PECI_M1D0_MODE2_HIGH 0x00030000 // Microprocessor 1 / Domain 0 // Mode 2 // Temperature CROSSED above HIGH #define PECI_M1D0_MODE3_LOW 0x00010000 // Microprocessor 1 / Domain 0 // Mode 3 // Temperature CROSSED below LOW #define PECI_M1D0_MODE3_MID 0x00020000 // Microprocessor 1 / Domain 0 // Mode 3 // Temperature CROSSED above LOW or // Temperature CROSSED below HIGH #define PECI_M1D0_MODE3_HIGH 0x00030000 // Microprocessor 1 / Domain 0 // Mode 3 // Temperature CROSSED above HIGH #define PECI_M1D1_MODE1_HIGH 0x00030000 // Microprocessor 1 / Domain 1 // Mode 1 // Temperature IS above HIGH #define PECI_M1D1_MODE2_MID 0x00020000 // Microprocessor 1 / Domain 1 // Mode 2 // Temperature CROSSED above LOW #define PECI_M1D1_MODE2_HIGH 0x00030000 // Microprocessor 1 / Domain 1 // Mode 2 // Temperature CROSSED above HIGH #define PECI_M1D1_MODE3_LOW 0x00010000 // Microprocessor 1 / Domain 1 // Mode 3 // Temperature CROSSED below LOW #define PECI_M1D1_MODE3_MID 0x00020000 // Microprocessor 1 / Domain 1 // Mode 3 // Temperature CROSSED above LOW or // Temperature CROSSED below HIGH #define PECI_M1D1_MODE3_HIGH 0x00030000 // Microprocessor 1 / Domain 1 // Mode 3 // Temperature CROSSED above HIGH //***************************************************************************** // // Values that can be passed to PECIIntEnable as the ulIntMode parameter. // //***************************************************************************** #define PECI_M0D0_MODE1 0x00010000 // Domain Interrupt Mode 1 #define PECI_M0D0_MODE2 0x00020000 // Domain Interrupt Mode 2 #define PECI_M0D0_MODE3 0x00030000 // Domain Interrupt Mode 3 #define PECI_M0D1_MODE1 0x00040000 // Domain Interrupt Mode 1 #define PECI_M0D1_MODE2 0x00080000 // Domain Interrupt Mode 2 #define PECI_M0D1_MODE3 0x000C0000 // Domain Interrupt Mode 3 #define PECI_M1D0_MODE1 0x00100000 // Domain Interrupt Mode 1 #define PECI_M1D0_MODE2 0x00200000 // Domain Interrupt Mode 2 #define PECI_M1D0_MODE3 0x00300000 // Domain Interrupt Mode 3 #define PECI_M1D1_MODE1 0x00400000 // Domain Interrupt Mode 1 #define PECI_M1D1_MODE2 0x00800000 // Domain Interrupt Mode 2 #define PECI_M1D1_MODE3 0x00C00000 // Domain Interrupt Mode 3 //***************************************************************************** // // Prototypes for the APIs. // //***************************************************************************** extern void PECIConfigSet(unsigned long ulBase, unsigned long ulPECIClk, unsigned long ulBaud, unsigned long ulPoll, unsigned long ulOffset, unsigned long ulRetry); extern void PECIConfigGet(unsigned long ulBase, unsigned long ulPECIClk, unsigned long *pulBaud, unsigned long *pulPoll, unsigned long *pulOffset, unsigned long *pulRetry); extern void PECIBypassEnable(unsigned long ulBase); extern void PECIBypassDisable(unsigned long ulBase); extern void PECIDomainConfigSet(unsigned long ulBase, unsigned long ulDomain, unsigned long ulHigh, unsigned long ulLow); extern void PECIDomainConfigGet(unsigned long ulBase, unsigned long ulDomain, unsigned long *pulHigh, unsigned long *pulLow); extern void PECIDomainEnable(unsigned long ulBase, unsigned long ulDomain); extern void PECIDomainDisable(unsigned long ulBase, unsigned long ulDomain); extern unsigned long PECIDomainValueGet(unsigned long ulBase, unsigned long ulDomain); extern unsigned long PECIDomainMaxReadGet(unsigned long ulBase, unsigned long ulDomain); extern void PECIDomainValueClear(unsigned long ulBase, unsigned long ulDomain); extern void PECIDomainMaxReadClear(unsigned long ulBase, unsigned long ulDomain); extern void PECIIntRegister(unsigned long ulBase, void (*pfnHandler)(void)); extern void PECIIntUnregister(unsigned long ulBase); extern void PECIIntEnable(unsigned long ulBase, unsigned long ulIntFlags, unsigned long ulIntMode); extern void PECIIntDisable(unsigned long ulBase, unsigned long ulIntFlags); extern unsigned long PECIIntStatus(unsigned long ulBase, tBoolean bMasked); extern void PECIIntClear(unsigned long ulBase, unsigned long ulIntFlags); extern void PECIAdvCmdSend(unsigned long ulBase, unsigned char ucCmd, unsigned char ucHidRe, unsigned char ucDomain, unsigned char ucProcAdd, unsigned long ulArg, unsigned char ucSize, unsigned long ulData0, unsigned long ulData1); extern unsigned long PECIAdvCmdSendNonBlocking(unsigned long ulBase, unsigned char ucCmd, unsigned char ucHidRe, unsigned char ucDomain, unsigned char ucProcAdd, unsigned long ulArg, unsigned char ucSize, unsigned long ulData0, unsigned long ulData1); extern unsigned long PECIAdvCmdStatusGet(unsigned long ulBase, unsigned long *pulData0, unsigned long *pulData1); //***************************************************************************** // // Mark the end of the C bindings section for C++ compilers. // //***************************************************************************** #ifdef __cplusplus } #endif #endif // __PECI_H__