/**************************************************************************//** * * @copyright (C) 2019 Nuvoton Technology Corp. All rights reserved. * * SPDX-License-Identifier: Apache-2.0 * * Change Logs: * Date Author Notes * 2022-3-15 Wayne First version * ******************************************************************************/ #include #include #include "NuMicro.h" #include "drv_uart.h" #include "drv_gpio.h" #include "board.h" #include "nutool_modclkcfg.h" #define LOG_TAG "drv.common" #undef DBG_ENABLE #define DBG_SECTION_NAME LOG_TAG #define DBG_LEVEL LOG_LVL_DBG #define DBG_COLOR #include extern void nutool_pincfg_init(void); /** * This function will initial. */ RT_WEAK void rt_hw_board_init(void) { uint32_t u32RegLockBackup = SYS_IsRegLocked(); /* Unlock protected registers */ SYS_UnlockReg(); /* Init System/modules clock */ nutool_modclkcfg_init(); /* Init all pin function setting */ nutool_pincfg_init(); /* Configure SysTick */ SysTick_Config(SystemCoreClock / RT_TICK_PER_SECOND); /* Update System Core Clock */ /* User can use SystemCoreClockUpdate() to calculate SystemCoreClock. */ SystemCoreClockUpdate(); #if defined(BSP_USING_EADC) /* Vref connect to internal */ SYS->VREFCTL = (SYS->VREFCTL & ~SYS_VREFCTL_VREFCTL_Msk) | SYS_VREFCTL_VREF_3_0V; #endif if (u32RegLockBackup) { /* Lock protected registers */ SYS_LockReg(); } #ifdef RT_USING_HEAP rt_system_heap_init(HEAP_BEGIN, HEAP_END); #endif /* RT_USING_HEAP */ #if defined(BSP_USING_UART) rt_hw_uart_init(); #endif #if defined(RT_USING_CONSOLE) && defined(RT_USING_DEVICE) rt_console_set_device(RT_CONSOLE_DEVICE_NAME); #endif NVIC_SetPriorityGrouping(7); #ifdef RT_USING_COMPONENTS_INIT rt_components_board_init(); #endif } /** * The time delay function. * * @param microseconds. */ void rt_hw_us_delay(rt_uint32_t us) { rt_uint32_t ticks; rt_uint32_t told, tnow, tcnt = 0; rt_uint32_t reload = SysTick->LOAD; ticks = us * reload / (1000000 / RT_TICK_PER_SECOND); told = SysTick->VAL; while (1) { tnow = SysTick->VAL; if (tnow != told) { if (tnow < told) { tcnt += told - tnow; } else { tcnt += reload - tnow + told; } told = tnow; if (tcnt >= ticks) { break; } } } } #define NU_MFP_POS(PIN) ((PIN % 4) * 8) #define NU_MFP_MSK(PIN) (0x1ful << NU_MFP_POS(PIN)) void nu_pin_set_function(rt_base_t pin, int data) { uint32_t GPx_MFPx_org; uint32_t pin_index = NU_GET_PINS(pin); uint32_t port_index = NU_GET_PORT(pin); __IO uint32_t *GPx_MFPx = ((__IO uint32_t *) &SYS->GPA_MFP0) + port_index * 4 + (pin_index / 4); uint32_t MFP_Msk = NU_MFP_MSK(pin_index); GPx_MFPx_org = *GPx_MFPx; *GPx_MFPx = (GPx_MFPx_org & (~MFP_Msk)) | data; //rt_kprintf("Port[%d]-Pin[%d] Addr[%08x] Data[%08x] %08x -> %08x\n", port_index, pin_index, GPx_MFPx, data, GPx_MFPx_org, *GPx_MFPx); } /** * This is the timer interrupt service routine. * */ void SysTick_Handler(void) { /* enter interrupt */ rt_interrupt_enter(); rt_tick_increase(); /* leave interrupt */ rt_interrupt_leave(); } void rt_hw_cpu_reset(void) { SYS_UnlockReg(); SYS->IPRST0 |= SYS_IPRST0_CHIPRST_Msk; } int reboot(int argc, char **argv) { rt_hw_cpu_reset(); return 0; } MSH_CMD_EXPORT(reboot, Reboot System); void devmem(int argc, char *argv[]) { volatile unsigned int u32Addr; unsigned int value = 0, mode = 0; if (argc < 2 || argc > 3) { goto exit_devmem; } if (argc == 3) { if (sscanf(argv[2], "0x%x", &value) != 1) goto exit_devmem; mode = 1; //Write } if (sscanf(argv[1], "0x%x", &u32Addr) != 1) goto exit_devmem; else if (!u32Addr || u32Addr & (4 - 1)) goto exit_devmem; if (mode) { *((volatile uint32_t *)u32Addr) = value; } rt_kprintf("0x%08x\n", *((volatile uint32_t *)u32Addr)); return; exit_devmem: rt_kprintf("Read: devmem \n"); rt_kprintf("Write: devmem \n"); return; } MSH_CMD_EXPORT(devmem, dump device registers); void devmem2(int argc, char *argv[]) { volatile unsigned int u32Addr; unsigned int value = 0, word_count = 1; if (argc < 2 || argc > 3) { goto exit_devmem; } if (argc == 3) { if (sscanf(argv[2], "%d", &value) != 1) goto exit_devmem; word_count = value; } if (sscanf(argv[1], "0x%x", &u32Addr) != 1) goto exit_devmem; else if (!u32Addr || u32Addr & (4 - 1)) goto exit_devmem; if ( word_count > 0 ) { LOG_HEX("devmem", 16, (void *)u32Addr, word_count*sizeof(rt_base_t)); } return; exit_devmem: rt_kprintf("devmem2: \n"); return; } MSH_CMD_EXPORT(devmem2, dump device registers);