/* * The Clear BSD License * Copyright (c) 2016, Freescale Semiconductor, Inc. * Copyright 2016-2017 NXP * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted (subject to the limitations in the disclaimer below) provided * that the following conditions are met: * * o Redistributions of source code must retain the above copyright notice, this list * of conditions and the following disclaimer. * * o Redistributions in binary form must reproduce the above copyright notice, this * list of conditions and the following disclaimer in the documentation and/or * other materials provided with the distribution. * * o Neither the name of the copyright holder nor the names of its * contributors may be used to endorse or promote products derived from this * software without specific prior written permission. * * NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED BY THIS LICENSE. * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #ifndef _BOARD_H_ #define _BOARD_H_ #include "clock_config.h" #include "fsl_common.h" #include "fsl_gpio.h" /******************************************************************************* * Definitions ******************************************************************************/ /*! @brief The board name */ #define BOARD_NAME "LPCXPRESSO54114" #define BOARD_EXTCLKINRATE (0) /*! @brief The UART to use for debug messages. */ #define BOARD_DEBUG_UART_TYPE DEBUG_CONSOLE_DEVICE_TYPE_FLEXCOMM #define BOARD_DEBUG_UART_BASEADDR (uint32_t) USART0 #define BOARD_DEBUG_UART_INSTANCE 0U #define BOARD_DEBUG_UART_CLK_FREQ CLOCK_GetFreq(kCLOCK_Flexcomm0) #define BOARD_DEBUG_UART_CLK_ATTACH kFRO12M_to_FLEXCOMM0 #define BOARD_DEBUG_UART_RST kFC0_RST_SHIFT_RSTn #define BOARD_DEBUG_SPI_CLK_FREQ 12000000 #ifndef BOARD_DEBUG_UART_BAUDRATE #define BOARD_DEBUG_UART_BAUDRATE 115200 #endif /* BOARD_DEBUG_UART_BAUDRATE */ #ifndef BOARD_LED_RED_GPIO #define BOARD_LED_RED_GPIO GPIO #endif #define BOARD_LED_RED_GPIO_PORT 0U #ifndef BOARD_LED_RED_GPIO_PIN #define BOARD_LED_RED_GPIO_PIN 29U #endif #ifndef BOARD_LED_GREEN_GPIO #define BOARD_LED_GREEN_GPIO GPIO #endif #define BOARD_LED_GREEN_GPIO_PORT 1U #ifndef BOARD_LED_GREEN_GPIO_PIN #define BOARD_LED_GREEN_GPIO_PIN 10U #endif #ifndef BOARD_LED_BLUE_GPIO #define BOARD_LED_BLUE_GPIO GPIO #endif #define BOARD_LED_BLUE_GPIO_PORT 1U #ifndef BOARD_LED_BLUE_GPIO_PIN #define BOARD_LED_BLUE_GPIO_PIN 9U #endif /* Board led color mapping */ #define LOGIC_LED_ON 0U #define LOGIC_LED_OFF 1U #define LED_RED_INIT(output) \ GPIO_PinInit(BOARD_LED_RED_GPIO, BOARD_LED_RED_GPIO_PORT, BOARD_LED_RED_GPIO_PIN, \ &(gpio_pin_config_t){kGPIO_DigitalOutput, (output)}) /*!< Enable target LED_RED */ #define LED_RED_ON() \ GPIO_PortClear(BOARD_LED_RED_GPIO, BOARD_LED_RED_GPIO_PORT, \ 1U << BOARD_LED_RED_GPIO_PIN) /*!< Turn on target LED_RED */ #define LED_RED_OFF() \ GPIO_PortSet(BOARD_LED_RED_GPIO, BOARD_LED_RED_GPIO_PORT, \ 1U << BOARD_LED_RED_GPIO_PIN) /*!< Turn off target LED_RED */ #define LED_RED_TOGGLE() \ GPIO_PortToggle(BOARD_LED_RED_GPIO, BOARD_LED_RED_GPIO_PORT, \ 1U << BOARD_LED_RED_GPIO_PIN) /*!< Toggle on target LED_RED */ #define LED_GREEN_INIT(output) \ GPIO_PinInit(BOARD_LED_GREEN_GPIO, BOARD_LED_GREEN_GPIO_PORT, BOARD_LED_GREEN_GPIO_PIN, \ &(gpio_pin_config_t){kGPIO_DigitalOutput, (output)}) /*!< Enable target LED_GREEN */ #define LED_GREEN_ON() \ GPIO_PortClear(BOARD_LED_GREEN_GPIO, BOARD_LED_GREEN_GPIO_PORT, \ 1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Turn on target LED_GREEN */ #define LED_GREEN_OFF() \ GPIO_PortSet(BOARD_LED_GREEN_GPIO, BOARD_LED_GREEN_GPIO_PORT, \ 1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Turn off target LED_GREEN */ #define LED_GREEN_TOGGLE() \ GPIO_PortToggle(BOARD_LED_GREEN_GPIO, BOARD_LED_GREEN_GPIO_PORT, \ 1U << BOARD_LED_GREEN_GPIO_PIN) /*!< Toggle on target LED_GREEN */ #define LED_BLUE_INIT(output) \ GPIO_PinInit(BOARD_LED_BLUE_GPIO, BOARD_LED_BLUE_GPIO_PORT, BOARD_LED_BLUE_GPIO_PIN, \ &(gpio_pin_config_t){kGPIO_DigitalOutput, (output)}) /*!< Enable target LED_BLUE */ #define LED_BLUE_ON() \ GPIO_PortClear(BOARD_LED_BLUE_GPIO, BOARD_LED_BLUE_GPIO_PORT, \ 1U << BOARD_LED_BLUE_GPIO_PIN) /*!< Turn on target LED_BLUE */ #define LED_BLUE_OFF() \ GPIO_PortSet(BOARD_LED_BLUE_GPIO, BOARD_LED_BLUE_GPIO_PORT, \ 1U << BOARD_LED_BLUE_GPIO_PIN) /*!< Turn off target LED_BLUE */ #define LED_BLUE_TOGGLE() \ GPIO_PortToggle(BOARD_LED_BLUE_GPIO, BOARD_LED_BLUE_GPIO_PORT, \ 1U << BOARD_LED_BLUE_GPIO_PIN) /*!< Toggle on target LED_BLUE */ #if defined(__cplusplus) extern "C" { #endif /* __cplusplus */ /******************************************************************************* * API ******************************************************************************/ status_t BOARD_InitDebugConsole(void); #ifdef SDK_PRIMARY_CORE void BOARD_StartSecondaryCore(void); #endif #if defined(__cplusplus) } #endif /* __cplusplus */ #endif /* _BOARD_H_ */