/* * Copyright (c) 2013-2017 ARM Limited. All rights reserved. * * SPDX-License-Identifier: Apache-2.0 * * Licensed under the Apache License, Version 2.0 (the License); you may * not use this file except in compliance with the License. * You may obtain a copy of the License at * * www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an AS IS BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. * * $Date: 2. Feb 2017 * $Revision: V2.3 * * Project: USART (Universal Synchronous Asynchronous Receiver Transmitter) * Driver definitions */ /* History: * Version 2.3 * ARM_USART_STATUS and ARM_USART_MODEM_STATUS made volatile * Version 2.2 * Corrected ARM_USART_CPOL_Pos and ARM_USART_CPHA_Pos definitions * Version 2.1 * Removed optional argument parameter from Signal Event * Version 2.0 * New simplified driver: * complexity moved to upper layer (especially data handling) * more unified API for different communication interfaces * renamed driver UART -> USART (Asynchronous & Synchronous) * Added modes: * Synchronous * Single-wire * IrDA * Smart Card * Changed prefix ARM_DRV -> ARM_DRIVER * Version 1.10 * Namespace prefix ARM_ added * Version 1.01 * Added events: * ARM_UART_EVENT_TX_EMPTY, ARM_UART_EVENT_RX_TIMEOUT * ARM_UART_EVENT_TX_THRESHOLD, ARM_UART_EVENT_RX_THRESHOLD * Added functions: SetTxThreshold, SetRxThreshold * Added "rx_timeout_event" to capabilities * Version 1.00 * Initial release */ #ifndef DRIVER_USART_H_ #define DRIVER_USART_H_ #ifdef __cplusplus extern "C" { #endif #include "Driver_Common.h" #define ARM_USART_API_VERSION ARM_DRIVER_VERSION_MAJOR_MINOR(2,3) /* API version */ /****** USART Control Codes *****/ #define ARM_USART_CONTROL_Pos 0 #define ARM_USART_CONTROL_Msk (0xFFUL << ARM_USART_CONTROL_Pos) /*----- USART Control Codes: Mode -----*/ #define ARM_USART_MODE_ASYNCHRONOUS (0x01UL << ARM_USART_CONTROL_Pos) ///< UART (Asynchronous); arg = Baudrate #define ARM_USART_MODE_SYNCHRONOUS_MASTER (0x02UL << ARM_USART_CONTROL_Pos) ///< Synchronous Master (generates clock signal); arg = Baudrate #define ARM_USART_MODE_SYNCHRONOUS_SLAVE (0x03UL << ARM_USART_CONTROL_Pos) ///< Synchronous Slave (external clock signal) #define ARM_USART_MODE_SINGLE_WIRE (0x04UL << ARM_USART_CONTROL_Pos) ///< UART Single-wire (half-duplex); arg = Baudrate #define ARM_USART_MODE_IRDA (0x05UL << ARM_USART_CONTROL_Pos) ///< UART IrDA; arg = Baudrate #define ARM_USART_MODE_SMART_CARD (0x06UL << ARM_USART_CONTROL_Pos) ///< UART Smart Card; arg = Baudrate /*----- USART Control Codes: Mode Parameters: Data Bits -----*/ #define ARM_USART_DATA_BITS_Pos 8 #define ARM_USART_DATA_BITS_Msk (7UL << ARM_USART_DATA_BITS_Pos) #define ARM_USART_DATA_BITS_5 (5UL << ARM_USART_DATA_BITS_Pos) ///< 5 Data bits #define ARM_USART_DATA_BITS_6 (6UL << ARM_USART_DATA_BITS_Pos) ///< 6 Data bit #define ARM_USART_DATA_BITS_7 (7UL << ARM_USART_DATA_BITS_Pos) ///< 7 Data bits #define ARM_USART_DATA_BITS_8 (0UL << ARM_USART_DATA_BITS_Pos) ///< 8 Data bits (default) #define ARM_USART_DATA_BITS_9 (1UL << ARM_USART_DATA_BITS_Pos) ///< 9 Data bits /*----- USART Control Codes: Mode Parameters: Parity -----*/ #define ARM_USART_PARITY_Pos 12 #define ARM_USART_PARITY_Msk (3UL << ARM_USART_PARITY_Pos) #define ARM_USART_PARITY_NONE (0UL << ARM_USART_PARITY_Pos) ///< No Parity (default) #define ARM_USART_PARITY_EVEN (1UL << ARM_USART_PARITY_Pos) ///< Even Parity #define ARM_USART_PARITY_ODD (2UL << ARM_USART_PARITY_Pos) ///< Odd Parity /*----- USART Control Codes: Mode Parameters: Stop Bits -----*/ #define ARM_USART_STOP_BITS_Pos 14 #define ARM_USART_STOP_BITS_Msk (3UL << ARM_USART_STOP_BITS_Pos) #define ARM_USART_STOP_BITS_1 (0UL << ARM_USART_STOP_BITS_Pos) ///< 1 Stop bit (default) #define ARM_USART_STOP_BITS_2 (1UL << ARM_USART_STOP_BITS_Pos) ///< 2 Stop bits #define ARM_USART_STOP_BITS_1_5 (2UL << ARM_USART_STOP_BITS_Pos) ///< 1.5 Stop bits #define ARM_USART_STOP_BITS_0_5 (3UL << ARM_USART_STOP_BITS_Pos) ///< 0.5 Stop bits /*----- USART Control Codes: Mode Parameters: Flow Control -----*/ #define ARM_USART_FLOW_CONTROL_Pos 16 #define ARM_USART_FLOW_CONTROL_Msk (3UL << ARM_USART_FLOW_CONTROL_Pos) #define ARM_USART_FLOW_CONTROL_NONE (0UL << ARM_USART_FLOW_CONTROL_Pos) ///< No Flow Control (default) #define ARM_USART_FLOW_CONTROL_RTS (1UL << ARM_USART_FLOW_CONTROL_Pos) ///< RTS Flow Control #define ARM_USART_FLOW_CONTROL_CTS (2UL << ARM_USART_FLOW_CONTROL_Pos) ///< CTS Flow Control #define ARM_USART_FLOW_CONTROL_RTS_CTS (3UL << ARM_USART_FLOW_CONTROL_Pos) ///< RTS/CTS Flow Control /*----- USART Control Codes: Mode Parameters: Clock Polarity (Synchronous mode) -----*/ #define ARM_USART_CPOL_Pos 18 #define ARM_USART_CPOL_Msk (1UL << ARM_USART_CPOL_Pos) #define ARM_USART_CPOL0 (0UL << ARM_USART_CPOL_Pos) ///< CPOL = 0 (default) #define ARM_USART_CPOL1 (1UL << ARM_USART_CPOL_Pos) ///< CPOL = 1 /*----- USART Control Codes: Mode Parameters: Clock Phase (Synchronous mode) -----*/ #define ARM_USART_CPHA_Pos 19 #define ARM_USART_CPHA_Msk (1UL << ARM_USART_CPHA_Pos) #define ARM_USART_CPHA0 (0UL << ARM_USART_CPHA_Pos) ///< CPHA = 0 (default) #define ARM_USART_CPHA1 (1UL << ARM_USART_CPHA_Pos) ///< CPHA = 1 /*----- USART Control Codes: Miscellaneous Controls -----*/ #define ARM_USART_SET_DEFAULT_TX_VALUE (0x10UL << ARM_USART_CONTROL_Pos) ///< Set default Transmit value (Synchronous Receive only); arg = value #define ARM_USART_SET_IRDA_PULSE (0x11UL << ARM_USART_CONTROL_Pos) ///< Set IrDA Pulse in ns; arg: 0=3/16 of bit period #define ARM_USART_SET_SMART_CARD_GUARD_TIME (0x12UL << ARM_USART_CONTROL_Pos) ///< Set Smart Card Guard Time; arg = number of bit periods #define ARM_USART_SET_SMART_CARD_CLOCK (0x13UL << ARM_USART_CONTROL_Pos) ///< Set Smart Card Clock in Hz; arg: 0=Clock not generated #define ARM_USART_CONTROL_SMART_CARD_NACK (0x14UL << ARM_USART_CONTROL_Pos) ///< Smart Card NACK generation; arg: 0=disabled, 1=enabled #define ARM_USART_CONTROL_TX (0x15UL << ARM_USART_CONTROL_Pos) ///< Transmitter; arg: 0=disabled, 1=enabled #define ARM_USART_CONTROL_RX (0x16UL << ARM_USART_CONTROL_Pos) ///< Receiver; arg: 0=disabled, 1=enabled #define ARM_USART_CONTROL_BREAK (0x17UL << ARM_USART_CONTROL_Pos) ///< Continuous Break transmission; arg: 0=disabled, 1=enabled #define ARM_USART_ABORT_SEND (0x18UL << ARM_USART_CONTROL_Pos) ///< Abort \ref ARM_USART_Send #define ARM_USART_ABORT_RECEIVE (0x19UL << ARM_USART_CONTROL_Pos) ///< Abort \ref ARM_USART_Receive #define ARM_USART_ABORT_TRANSFER (0x1AUL << ARM_USART_CONTROL_Pos) ///< Abort \ref ARM_USART_Transfer /****** USART specific error codes *****/ #define ARM_USART_ERROR_MODE (ARM_DRIVER_ERROR_SPECIFIC - 1) ///< Specified Mode not supported #define ARM_USART_ERROR_BAUDRATE (ARM_DRIVER_ERROR_SPECIFIC - 2) ///< Specified baudrate not supported #define ARM_USART_ERROR_DATA_BITS (ARM_DRIVER_ERROR_SPECIFIC - 3) ///< Specified number of Data bits not supported #define ARM_USART_ERROR_PARITY (ARM_DRIVER_ERROR_SPECIFIC - 4) ///< Specified Parity not supported #define ARM_USART_ERROR_STOP_BITS (ARM_DRIVER_ERROR_SPECIFIC - 5) ///< Specified number of Stop bits not supported #define ARM_USART_ERROR_FLOW_CONTROL (ARM_DRIVER_ERROR_SPECIFIC - 6) ///< Specified Flow Control not supported #define ARM_USART_ERROR_CPOL (ARM_DRIVER_ERROR_SPECIFIC - 7) ///< Specified Clock Polarity not supported #define ARM_USART_ERROR_CPHA (ARM_DRIVER_ERROR_SPECIFIC - 8) ///< Specified Clock Phase not supported /** \brief USART Status */ typedef volatile struct _ARM_USART_STATUS { uint32_t tx_busy : 1; ///< Transmitter busy flag uint32_t rx_busy : 1; ///< Receiver busy flag uint32_t tx_underflow : 1; ///< Transmit data underflow detected (cleared on start of next send operation) uint32_t rx_overflow : 1; ///< Receive data overflow detected (cleared on start of next receive operation) uint32_t rx_break : 1; ///< Break detected on receive (cleared on start of next receive operation) uint32_t rx_framing_error : 1; ///< Framing error detected on receive (cleared on start of next receive operation) uint32_t rx_parity_error : 1; ///< Parity error detected on receive (cleared on start of next receive operation) uint32_t reserved : 25; } ARM_USART_STATUS; /** \brief USART Modem Control */ typedef enum _ARM_USART_MODEM_CONTROL { ARM_USART_RTS_CLEAR, ///< Deactivate RTS ARM_USART_RTS_SET, ///< Activate RTS ARM_USART_DTR_CLEAR, ///< Deactivate DTR ARM_USART_DTR_SET ///< Activate DTR } ARM_USART_MODEM_CONTROL; /** \brief USART Modem Status */ typedef volatile struct _ARM_USART_MODEM_STATUS { uint32_t cts : 1; ///< CTS state: 1=Active, 0=Inactive uint32_t dsr : 1; ///< DSR state: 1=Active, 0=Inactive uint32_t dcd : 1; ///< DCD state: 1=Active, 0=Inactive uint32_t ri : 1; ///< RI state: 1=Active, 0=Inactive uint32_t reserved : 28; } ARM_USART_MODEM_STATUS; /****** USART Event *****/ #define ARM_USART_EVENT_SEND_COMPLETE (1UL << 0) ///< Send completed; however USART may still transmit data #define ARM_USART_EVENT_RECEIVE_COMPLETE (1UL << 1) ///< Receive completed #define ARM_USART_EVENT_TRANSFER_COMPLETE (1UL << 2) ///< Transfer completed #define ARM_USART_EVENT_TX_COMPLETE (1UL << 3) ///< Transmit completed (optional) #define ARM_USART_EVENT_TX_UNDERFLOW (1UL << 4) ///< Transmit data not available (Synchronous Slave) #define ARM_USART_EVENT_RX_OVERFLOW (1UL << 5) ///< Receive data overflow #define ARM_USART_EVENT_RX_TIMEOUT (1UL << 6) ///< Receive character timeout (optional) #define ARM_USART_EVENT_RX_BREAK (1UL << 7) ///< Break detected on receive #define ARM_USART_EVENT_RX_FRAMING_ERROR (1UL << 8) ///< Framing error detected on receive #define ARM_USART_EVENT_RX_PARITY_ERROR (1UL << 9) ///< Parity error detected on receive #define ARM_USART_EVENT_CTS (1UL << 10) ///< CTS state changed (optional) #define ARM_USART_EVENT_DSR (1UL << 11) ///< DSR state changed (optional) #define ARM_USART_EVENT_DCD (1UL << 12) ///< DCD state changed (optional) #define ARM_USART_EVENT_RI (1UL << 13) ///< RI state changed (optional) // Function documentation /** \fn ARM_DRIVER_VERSION ARM_USART_GetVersion (void) \brief Get driver version. \return \ref ARM_DRIVER_VERSION \fn ARM_USART_CAPABILITIES ARM_USART_GetCapabilities (void) \brief Get driver capabilities \return \ref ARM_USART_CAPABILITIES \fn int32_t ARM_USART_Initialize (ARM_USART_SignalEvent_t cb_event) \brief Initialize USART Interface. \param[in] cb_event Pointer to \ref ARM_USART_SignalEvent \return \ref execution_status \fn int32_t ARM_USART_Uninitialize (void) \brief De-initialize USART Interface. \return \ref execution_status \fn int32_t ARM_USART_PowerControl (ARM_POWER_STATE state) \brief Control USART Interface Power. \param[in] state Power state \return \ref execution_status \fn int32_t ARM_USART_Send (const void *data, uint32_t num) \brief Start sending data to USART transmitter. \param[in] data Pointer to buffer with data to send to USART transmitter \param[in] num Number of data items to send \return \ref execution_status \fn int32_t ARM_USART_Receive (void *data, uint32_t num) \brief Start receiving data from USART receiver. \param[out] data Pointer to buffer for data to receive from USART receiver \param[in] num Number of data items to receive \return \ref execution_status \fn int32_t ARM_USART_Transfer (const void *data_out, void *data_in, uint32_t num) \brief Start sending/receiving data to/from USART transmitter/receiver. \param[in] data_out Pointer to buffer with data to send to USART transmitter \param[out] data_in Pointer to buffer for data to receive from USART receiver \param[in] num Number of data items to transfer \return \ref execution_status \fn uint32_t ARM_USART_GetTxCount (void) \brief Get transmitted data count. \return number of data items transmitted \fn uint32_t ARM_USART_GetRxCount (void) \brief Get received data count. \return number of data items received \fn int32_t ARM_USART_Control (uint32_t control, uint32_t arg) \brief Control USART Interface. \param[in] control Operation \param[in] arg Argument of operation (optional) \return common \ref execution_status and driver specific \ref usart_execution_status \fn ARM_USART_STATUS ARM_USART_GetStatus (void) \brief Get USART status. \return USART status \ref ARM_USART_STATUS \fn int32_t ARM_USART_SetModemControl (ARM_USART_MODEM_CONTROL control) \brief Set USART Modem Control line state. \param[in] control \ref ARM_USART_MODEM_CONTROL \return \ref execution_status \fn ARM_USART_MODEM_STATUS ARM_USART_GetModemStatus (void) \brief Get USART Modem Status lines state. \return modem status \ref ARM_USART_MODEM_STATUS \fn void ARM_USART_SignalEvent (uint32_t event) \brief Signal USART Events. \param[in] event \ref USART_events notification mask \return none */ typedef void (*ARM_USART_SignalEvent_t) (uint32_t event); ///< Pointer to \ref ARM_USART_SignalEvent : Signal USART Event. /** \brief USART Device Driver Capabilities. */ typedef struct _ARM_USART_CAPABILITIES { uint32_t asynchronous : 1; ///< supports UART (Asynchronous) mode uint32_t synchronous_master : 1; ///< supports Synchronous Master mode uint32_t synchronous_slave : 1; ///< supports Synchronous Slave mode uint32_t single_wire : 1; ///< supports UART Single-wire mode uint32_t irda : 1; ///< supports UART IrDA mode uint32_t smart_card : 1; ///< supports UART Smart Card mode uint32_t smart_card_clock : 1; ///< Smart Card Clock generator available uint32_t flow_control_rts : 1; ///< RTS Flow Control available uint32_t flow_control_cts : 1; ///< CTS Flow Control available uint32_t event_tx_complete : 1; ///< Transmit completed event: \ref ARM_USART_EVENT_TX_COMPLETE uint32_t event_rx_timeout : 1; ///< Signal receive character timeout event: \ref ARM_USART_EVENT_RX_TIMEOUT uint32_t rts : 1; ///< RTS Line: 0=not available, 1=available uint32_t cts : 1; ///< CTS Line: 0=not available, 1=available uint32_t dtr : 1; ///< DTR Line: 0=not available, 1=available uint32_t dsr : 1; ///< DSR Line: 0=not available, 1=available uint32_t dcd : 1; ///< DCD Line: 0=not available, 1=available uint32_t ri : 1; ///< RI Line: 0=not available, 1=available uint32_t event_cts : 1; ///< Signal CTS change event: \ref ARM_USART_EVENT_CTS uint32_t event_dsr : 1; ///< Signal DSR change event: \ref ARM_USART_EVENT_DSR uint32_t event_dcd : 1; ///< Signal DCD change event: \ref ARM_USART_EVENT_DCD uint32_t event_ri : 1; ///< Signal RI change event: \ref ARM_USART_EVENT_RI uint32_t reserved : 11; ///< Reserved (must be zero) } ARM_USART_CAPABILITIES; /** \brief Access structure of the USART Driver. */ typedef struct _ARM_DRIVER_USART { ARM_DRIVER_VERSION (*GetVersion) (void); ///< Pointer to \ref ARM_USART_GetVersion : Get driver version. ARM_USART_CAPABILITIES (*GetCapabilities) (void); ///< Pointer to \ref ARM_USART_GetCapabilities : Get driver capabilities. int32_t (*Initialize) (ARM_USART_SignalEvent_t cb_event); ///< Pointer to \ref ARM_USART_Initialize : Initialize USART Interface. int32_t (*Uninitialize) (void); ///< Pointer to \ref ARM_USART_Uninitialize : De-initialize USART Interface. int32_t (*PowerControl) (ARM_POWER_STATE state); ///< Pointer to \ref ARM_USART_PowerControl : Control USART Interface Power. int32_t (*Send) (const void *data, uint32_t num); ///< Pointer to \ref ARM_USART_Send : Start sending data to USART transmitter. int32_t (*Receive) ( void *data, uint32_t num); ///< Pointer to \ref ARM_USART_Receive : Start receiving data from USART receiver. int32_t (*Transfer) (const void *data_out, void *data_in, uint32_t num); ///< Pointer to \ref ARM_USART_Transfer : Start sending/receiving data to/from USART. uint32_t (*GetTxCount) (void); ///< Pointer to \ref ARM_USART_GetTxCount : Get transmitted data count. uint32_t (*GetRxCount) (void); ///< Pointer to \ref ARM_USART_GetRxCount : Get received data count. int32_t (*Control) (uint32_t control, uint32_t arg); ///< Pointer to \ref ARM_USART_Control : Control USART Interface. ARM_USART_STATUS (*GetStatus) (void); ///< Pointer to \ref ARM_USART_GetStatus : Get USART status. int32_t (*SetModemControl) (ARM_USART_MODEM_CONTROL control); ///< Pointer to \ref ARM_USART_SetModemControl : Set USART Modem Control line state. ARM_USART_MODEM_STATUS (*GetModemStatus) (void); ///< Pointer to \ref ARM_USART_GetModemStatus : Get USART Modem Status lines state. } const ARM_DRIVER_USART; #ifdef __cplusplus } #endif #endif /* DRIVER_USART_H_ */