/* * Copyright (c) 2006-2022, RT-Thread Development Team * * SPDX-License-Identifier: Apache-2.0 * * Change Logs: * Date Author Notes * 2021-12-10 Meco Man first version */ #include #include #include "pins_arduino.h" /* * {Arduino Pin, RT-Thread Pin [, Device Name, Channel]} * [] means optional * Digital pins must NOT give the device name and channel. * Analog pins MUST give the device name and channel(ADC, PWM or DAC). * Arduino Pin must keep in sequence. */ const pin_map_t pin_map_table[]= { {D0, GET_PIN(A,3), "uart2"}, /* Serial-Rx */ {D1, GET_PIN(A,2), "uart2"}, /* Serial-Tx */ {D2, GET_PIN(A,10)}, {D3, GET_PIN(B,3), "pwm2", 2}, /* PWM */ {D4, GET_PIN(B,5)}, {D5, GET_PIN(B,4), "pwm3", 1}, /* PWM */ {D6, GET_PIN(B,10), "pwm2", 3}, /* PWM */ {D7, GET_PIN(A,8)}, {D8, GET_PIN(A,9)}, {D9, GET_PIN(C,7), "pwm3", 2}, /* PWM */ {D10, GET_PIN(B,6), "pwm16", -1}, /* PWM */ {D11, GET_PIN(A,7), "pwm17", 1}, /* PWM */ {D12, GET_PIN(A,6)}, {D13, GET_PIN(A,5)}, /* LED_BUILTIN */ {D14, GET_PIN(B,9), "i2c1"}, /* I2C-SDA (Wire) */ {D15, GET_PIN(B,8), "i2c1"}, /* I2C-SCL (Wire) */ {D16, GET_PIN(C,13)}, {A0, GET_PIN(A,0), "adc1", 0}, /* ADC */ {A1, GET_PIN(A,1), "adc1", 1}, /* ADC */ {A2, GET_PIN(A,4), "adc1", 4}, /* ADC */ {A3, GET_PIN(B,0), "adc1", 8}, /* ADC */ {A4, GET_PIN(C,1), "adc1", 11}, /* ADC */ {A5, GET_PIN(C,0), "adc1", 10}, /* ADC */ {A6, RT_NULL, "adc1", 17}, /* ADC, On-Chip: internal reference voltage, ADC_CHANNEL_VREFINT */ {A7, RT_NULL, "adc1", 16}, /* ADC, On-Chip: internal temperature sensor, ADC_CHANNEL_TEMPSENSOR */ };