/**************************************************************************//** * @file LPC11xx.h * @brief CMSIS Cortex-M0 Core Peripheral Access Layer Header File for * NXP LPC11xx Device Series * @version V1.00 * @date 17. November 2009 * * @note * Copyright (C) 2009 ARM Limited. All rights reserved. * * @par * ARM Limited (ARM) is supplying this software for use with Cortex-M * processor based microcontrollers. This file can be freely distributed * within development tools that are supporting such ARM based processors. * * @par * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER. * ******************************************************************************/ #ifndef __LPC11xx_H__ #define __LPC11xx_H__ #ifdef __cplusplus extern "C" { #endif /** @addtogroup LPC11xx_Definitions LPC11xx Definitions This file defines all structures and symbols for LPC11xx: - Registers and bitfields - peripheral base address - peripheral ID - PIO definitions @{ */ /******************************************************************************/ /* Processor and Core Peripherals */ /******************************************************************************/ /** @addtogroup LPC11xx_CMSIS LPC11xx CMSIS Definitions Configuration of the Cortex-M0 Processor and Core Peripherals @{ */ /* * ========================================================================== * ---------- Interrupt Number Definition ----------------------------------- * ========================================================================== */ typedef enum IRQn { /****** Cortex-M0 Processor Exceptions Numbers ***************************************************/ NonMaskableInt_IRQn = -14, /*!< 2 Non Maskable Interrupt */ HardFault_IRQn = -13, /*!< 3 Cortex-M0 Hard Fault Interrupt */ SVCall_IRQn = -5, /*!< 11 Cortex-M0 SV Call Interrupt */ PendSV_IRQn = -2, /*!< 14 Cortex-M0 Pend SV Interrupt */ SysTick_IRQn = -1, /*!< 15 Cortex-M0 System Tick Interrupt */ /****** LPC11xx Specific Interrupt Numbers *******************************************************/ WAKEUP0_IRQn = 0, /*!< All I/O pins can be used as wakeup source. */ WAKEUP1_IRQn = 1, /*!< There are 13 pins in total for LPC11xx */ WAKEUP2_IRQn = 2, WAKEUP3_IRQn = 3, WAKEUP4_IRQn = 4, WAKEUP5_IRQn = 5, WAKEUP6_IRQn = 6, WAKEUP7_IRQn = 7, WAKEUP8_IRQn = 8, WAKEUP9_IRQn = 9, WAKEUP10_IRQn = 10, WAKEUP11_IRQn = 11, WAKEUP12_IRQn = 12, SSP1_IRQn = 14, /*!< SSP1 Interrupt */ I2C_IRQn = 15, /*!< I2C Interrupt */ TIMER_16_0_IRQn = 16, /*!< 16-bit Timer0 Interrupt */ TIMER_16_1_IRQn = 17, /*!< 16-bit Timer1 Interrupt */ TIMER_32_0_IRQn = 18, /*!< 32-bit Timer0 Interrupt */ TIMER_32_1_IRQn = 19, /*!< 32-bit Timer1 Interrupt */ SSP0_IRQn = 20, /*!< SSP0 Interrupt */ UART_IRQn = 21, /*!< UART Interrupt */ ADC_IRQn = 24, /*!< A/D Converter Interrupt */ WDT_IRQn = 25, /*!< Watchdog timer Interrupt */ BOD_IRQn = 26, /*!< Brown Out Detect(BOD) Interrupt */ EINT3_IRQn = 28, /*!< External Interrupt 3 Interrupt */ EINT2_IRQn = 29, /*!< External Interrupt 2 Interrupt */ EINT1_IRQn = 30, /*!< External Interrupt 1 Interrupt */ EINT0_IRQn = 31, /*!< External Interrupt 0 Interrupt */ } IRQn_Type; /* * ========================================================================== * ----------- Processor and Core Peripheral Section ------------------------ * ========================================================================== */ /* Configuration of the Cortex-M3 Processor and Core Peripherals */ #define __MPU_PRESENT 0 /*!< MPU present or not */ #define __NVIC_PRIO_BITS 3 /*!< Number of Bits used for Priority Levels */ #define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */ /*@}*/ /* end of group LPC11xx_CMSIS */ #include "core_cm0.h" /* Cortex-M0 processor and core peripherals */ #include "system_LPC11xx.h" /* System Header */ /******************************************************************************/ /* Device Specific Peripheral Registers structures */ /******************************************************************************/ #if defined ( __CC_ARM ) #pragma anon_unions #endif /*------------- System Control (SYSCON) --------------------------------------*/ /** @addtogroup LPC11xx_SYSCON LPC11xx System Control Block @{ */ typedef struct { __IO uint32_t SYSMEMREMAP; /*!< Offset: 0x000 System memory remap (R/W) */ __IO uint32_t PRESETCTRL; /*!< Offset: 0x004 Peripheral reset control (R/W) */ __IO uint32_t SYSPLLCTRL; /*!< Offset: 0x008 System PLL control (R/W) */ __IO uint32_t SYSPLLSTAT; /*!< Offset: 0x00C System PLL status (R/ ) */ uint32_t RESERVED0[4]; __IO uint32_t SYSOSCCTRL; /*!< Offset: 0x020 System oscillator control (R/W) */ __IO uint32_t WDTOSCCTRL; /*!< Offset: 0x024 Watchdog oscillator control (R/W) */ __IO uint32_t IRCCTRL; /*!< Offset: 0x028 IRC control (R/W) */ uint32_t RESERVED1[1]; __IO uint32_t SYSRESSTAT; /*!< Offset: 0x030 System reset status Register (R/ ) */ uint32_t RESERVED2[3]; __IO uint32_t SYSPLLCLKSEL; /*!< Offset: 0x040 System PLL clock source select (R/W) */ __IO uint32_t SYSPLLCLKUEN; /*!< Offset: 0x044 System PLL clock source update enable (R/W) */ uint32_t RESERVED3[10]; __IO uint32_t MAINCLKSEL; /*!< Offset: 0x070 Main clock source select (R/W) */ __IO uint32_t MAINCLKUEN; /*!< Offset: 0x074 Main clock source update enable (R/W) */ __IO uint32_t SYSAHBCLKDIV; /*!< Offset: 0x078 System AHB clock divider (R/W) */ uint32_t RESERVED4[1]; __IO uint32_t SYSAHBCLKCTRL; /*!< Offset: 0x080 System AHB clock control (R/W) */ uint32_t RESERVED5[4]; __IO uint32_t SSP0CLKDIV; /*!< Offset: 0x094 SSP0 clock divider (R/W) */ __IO uint32_t UARTCLKDIV; /*!< Offset: 0x098 UART clock divider (R/W) */ __IO uint32_t SSP1CLKDIV; /*!< Offset: 0x09C SSP1 clock divider (R/W) */ uint32_t RESERVED6[4]; __IO uint32_t SYSTICKCLKDIV; /*!< Offset: 0x0B0 SYSTICK clock divider (R/W) */ uint32_t RESERVED7[7]; __IO uint32_t WDTCLKSEL; /*!< Offset: 0x0D0 WDT clock source select (R/W) */ __IO uint32_t WDTCLKUEN; /*!< Offset: 0x0D4 WDT clock source update enable (R/W) */ __IO uint32_t WDTCLKDIV; /*!< Offset: 0x0D8 WDT clock divider (R/W) */ uint32_t RESERVED8[1]; __IO uint32_t CLKOUTCLKSEL; /*!< Offset: 0x0E0 CLKOUT clock source select (R/W) */ __IO uint32_t CLKOUTUEN; /*!< Offset: 0x0E4 CLKOUT clock source update enable (R/W) */ __IO uint32_t CLKOUTDIV; /*!< Offset: 0x0E8 CLKOUT clock divider (R/W) */ uint32_t RESERVED9[5]; __IO uint32_t PIOPORCAP0; /*!< Offset: 0x100 POR captured PIO status 0 (R/ ) */ __IO uint32_t PIOPORCAP1; /*!< Offset: 0x104 POR captured PIO status 1 (R/ ) */ uint32_t RESERVED10[18]; __IO uint32_t BODCTRL; /*!< Offset: 0x150 BOD control (R/W) */ uint32_t RESERVED11[1]; __IO uint32_t SYSTCKCAL; /*!< Offset: 0x158 System tick counter calibration (R/W) */ uint32_t RESERVED12[41]; __IO uint32_t STARTAPRP0; /*!< Offset: 0x200 Start logic edge control Register 0 (R/W) */ __IO uint32_t STARTERP0; /*!< Offset: 0x204 Start logic signal enable Register 0 (R/W) */ __IO uint32_t STARTRSRP0CLR; /*!< Offset: 0x208 Start logic reset Register 0 ( /W) */ __IO uint32_t STARTSRP0; /*!< Offset: 0x20C Start logic status Register 0 (R/W) */ uint32_t RESERVED14[8]; __IO uint32_t PDSLEEPCFG; /*!< Offset: 0x230 Power-down states in Deep-sleep mode (R/W) */ __IO uint32_t PDAWAKECFG; /*!< Offset: 0x234 Power-down states after wake-up (R/W) */ __IO uint32_t PDRUNCFG; /*!< Offset: 0x238 Power-down configuration Register (R/W) */ uint32_t RESERVED15[110]; __I uint32_t DEVICE_ID; /*!< Offset: 0x3F4 Device ID (R/ ) */ } LPC_SYSCON_TypeDef; /*@}*/ /* end of group LPC11xx_SYSCON */ /*------------- Pin Connect Block (IOCON) --------------------------------*/ /** @addtogroup LPC11xx_IOCON LPC11xx I/O Configuration Block @{ */ typedef struct { __IO uint32_t PIO2_6; /*!< Offset: 0x000 I/O configuration for pin PIO2_6 (R/W) */ uint32_t RESERVED0[1]; __IO uint32_t PIO2_0; /*!< Offset: 0x008 I/O configuration for pin PIO2_0/DTR/SSEL1 (R/W) */ __IO uint32_t RESET_PIO0_0; /*!< Offset: 0x00C I/O configuration for pin RESET/PIO0_0 (R/W) */ __IO uint32_t PIO0_1; /*!< Offset: 0x010 I/O configuration for pin PIO0_1/CLKOUT/CT32B0_MAT2 (R/W) */ __IO uint32_t PIO1_8; /*!< Offset: 0x014 I/O configuration for pin PIO1_8/CT16B1_CAP0 (R/W) */ uint32_t RESERVED1[1]; __IO uint32_t PIO0_2; /*!< Offset: 0x01C I/O configuration for pin PIO0_2/SSEL0/CT16B0_CAP0 (R/W) */ __IO uint32_t PIO2_7; /*!< Offset: 0x020 I/O configuration for pin PIO2_7 (R/W) */ __IO uint32_t PIO2_8; /*!< Offset: 0x024 I/O configuration for pin PIO2_8 (R/W) */ __IO uint32_t PIO2_1; /*!< Offset: 0x028 I/O configuration for pin PIO2_1/nDSR/SCK1 (R/W) */ __IO uint32_t PIO0_3; /*!< Offset: 0x02C I/O configuration for pin PIO0_3 (R/W) */ __IO uint32_t PIO0_4; /*!< Offset: 0x030 I/O configuration for pin PIO0_4/SCL (R/W) */ __IO uint32_t PIO0_5; /*!< Offset: 0x034 I/O configuration for pin PIO0_5/SDA (R/W) */ __IO uint32_t PIO1_9; /*!< Offset: 0x038 I/O configuration for pin PIO1_9/CT16B1_MAT0 (R/W) */ __IO uint32_t PIO3_4; /*!< Offset: 0x03C I/O configuration for pin PIO3_4 (R/W) */ __IO uint32_t PIO2_4; /*!< Offset: 0x040 I/O configuration for pin PIO2_4 (R/W) */ __IO uint32_t PIO2_5; /*!< Offset: 0x044 I/O configuration for pin PIO2_5 (R/W) */ __IO uint32_t PIO3_5; /*!< Offset: 0x048 I/O configuration for pin PIO3_5 (R/W) */ __IO uint32_t PIO0_6; /*!< Offset: 0x04C I/O configuration for pin PIO0_6/SCK0 (R/W) */ __IO uint32_t PIO0_7; /*!< Offset: 0x050 I/O configuration for pin PIO0_7/nCTS (R/W) */ __IO uint32_t PIO2_9; /*!< Offset: 0x054 I/O configuration for pin PIO2_9 (R/W) */ __IO uint32_t PIO2_10; /*!< Offset: 0x058 I/O configuration for pin PIO2_10 (R/W) */ __IO uint32_t PIO2_2; /*!< Offset: 0x05C I/O configuration for pin PIO2_2/DCD/MISO1 (R/W) */ __IO uint32_t PIO0_8; /*!< Offset: 0x060 I/O configuration for pin PIO0_8/MISO0/CT16B0_MAT0 (R/W) */ __IO uint32_t PIO0_9; /*!< Offset: 0x064 I/O configuration for pin PIO0_9/MOSI0/CT16B0_MAT1 (R/W) */ __IO uint32_t JTAG_TCK_PIO0_10; /*!< Offset: 0x068 I/O configuration for pin SWCLK/PIO0_10/SCK0/CT16B0_MAT2 (R/W) */ __IO uint32_t PIO1_10; /*!< Offset: 0x06C I/O configuration for pin PIO1_10/AD6/CT16B1_MAT1 (R/W) */ __IO uint32_t PIO2_11; /*!< Offset: 0x070 I/O configuration for pin PIO2_11/SCK0 (R/W) */ __IO uint32_t JTAG_TDI_PIO0_11; /*!< Offset: 0x074 I/O configuration for pin TDI/PIO0_11/AD0/CT32B0_MAT3 (R/W) */ __IO uint32_t JTAG_TMS_PIO1_0; /*!< Offset: 0x078 I/O configuration for pin TMS/PIO1_0/AD1/CT32B1_CAP0 (R/W) */ __IO uint32_t JTAG_TDO_PIO1_1; /*!< Offset: 0x07C I/O configuration for pin TDO/PIO1_1/AD2/CT32B1_MAT0 (R/W) */ __IO uint32_t JTAG_nTRST_PIO1_2; /*!< Offset: 0x080 I/O configuration for pin nTRST/PIO1_2/AD3/CT32B1_MAT1 (R/W) */ __IO uint32_t PIO3_0; /*!< Offset: 0x084 I/O configuration for pin PIO3_0/nDTR (R/W) */ __IO uint32_t PIO3_1; /*!< Offset: 0x088 I/O configuration for pin PIO3_1/nDSR (R/W) */ __IO uint32_t PIO2_3; /*!< Offset: 0x08C I/O configuration for pin PIO2_3/RI/MOSI1 (R/W) */ __IO uint32_t ARM_SWDIO_PIO1_3; /*!< Offset: 0x090 I/O configuration for pin SWDIO/PIO1_3/AD4/CT32B1_MAT2 (R/W) */ __IO uint32_t PIO1_4; /*!< Offset: 0x094 I/O configuration for pin PIO1_4/AD5/CT32B1_MAT3 (R/W) */ __IO uint32_t PIO1_11; /*!< Offset: 0x098 I/O configuration for pin PIO1_11/AD7 (R/W) */ __IO uint32_t PIO3_2; /*!< Offset: 0x09C I/O configuration for pin PIO3_2/nDCD (R/W) */ __IO uint32_t PIO1_5; /*!< Offset: 0x0A0 I/O configuration for pin PIO1_5/nRTS/CT32B0_CAP0 (R/W) */ __IO uint32_t PIO1_6; /*!< Offset: 0x0A4 I/O configuration for pin PIO1_6/RXD/CT32B0_MAT0 (R/W) */ __IO uint32_t PIO1_7; /*!< Offset: 0x0A8 I/O configuration for pin PIO1_7/TXD/CT32B0_MAT1 (R/W) */ __IO uint32_t PIO3_3; /*!< Offset: 0x0AC I/O configuration for pin PIO3_3/nRI (R/W) */ __IO uint32_t SCK_LOC; /*!< Offset: 0x0B0 SCK pin location select Register (R/W) */ __IO uint32_t DSR_LOC; /*!< Offset: 0x0B4 DSR pin location select Register (R/W) */ __IO uint32_t DCD_LOC; /*!< Offset: 0x0B8 DCD pin location select Register (R/W) */ __IO uint32_t RI_LOC; /*!< Offset: 0x0BC RI pin location Register (R/W) */ } LPC_IOCON_TypeDef; /*@}*/ /* end of group LPC11xx_IOCON */ /*------------- Power Management Unit (PMU) --------------------------*/ /** @addtogroup LPC11xx_PMU LPC11xx Power Management Unit @{ */ typedef struct { __IO uint32_t PCON; /*!< Offset: 0x000 Power control Register (R/W) */ __IO uint32_t GPREG0; /*!< Offset: 0x004 General purpose Register 0 (R/W) */ __IO uint32_t GPREG1; /*!< Offset: 0x008 General purpose Register 1 (R/W) */ __IO uint32_t GPREG2; /*!< Offset: 0x00C General purpose Register 2 (R/W) */ __IO uint32_t GPREG3; /*!< Offset: 0x010 General purpose Register 3 (R/W) */ __IO uint32_t GPREG4; /*!< Offset: 0x014 General purpose Register 4 (R/W) */ } LPC_PMU_TypeDef; /*@}*/ /* end of group LPC11xx_PMU */ /*------------- General Purpose Input/Output (GPIO) --------------------------*/ /** @addtogroup LPC11xx_GPIO LPC11xx General Purpose Input/Output @{ */ typedef struct { union { __IO uint32_t MASKED_ACCESS[4096]; /*!< Offset: 0x0000 to 0x3FFC Port data Register for pins PIOn_0 to PIOn_11 (R/W) */ struct { uint32_t RESERVED0[4095]; __IO uint32_t DATA; /*!< Offset: 0x3FFC Port data Register (R/W) */ }; }; uint32_t RESERVED1[4096]; __IO uint32_t DIR; /*!< Offset: 0x8000 Data direction Register (R/W) */ __IO uint32_t IS; /*!< Offset: 0x8004 Interrupt sense Register (R/W) */ __IO uint32_t IBE; /*!< Offset: 0x8008 Interrupt both edges Register (R/W) */ __IO uint32_t IEV; /*!< Offset: 0x800C Interrupt event Register (R/W) */ __IO uint32_t IE; /*!< Offset: 0x8010 Interrupt mask Register (R/W) */ __IO uint32_t RIS; /*!< Offset: 0x8014 Raw interrupt status Register (R/ ) */ __IO uint32_t MIS; /*!< Offset: 0x8018 Masked interrupt status Register (R/ ) */ __IO uint32_t IC; /*!< Offset: 0x801C Interrupt clear Register (R/W) */ } LPC_GPIO_TypeDef; /*@}*/ /* end of group LPC11xx_GPIO */ /*------------- Timer (TMR) --------------------------------------------------*/ /** @addtogroup LPC11xx_TMR LPC11xx 16/32-bit Counter/Timer @{ */ typedef struct { __IO uint32_t IR; /*!< Offset: 0x000 Interrupt Register (R/W) */ __IO uint32_t TCR; /*!< Offset: 0x004 Timer Control Register (R/W) */ __IO uint32_t TC; /*!< Offset: 0x008 Timer Counter Register (R/W) */ __IO uint32_t PR; /*!< Offset: 0x00C Prescale Register (R/W) */ __IO uint32_t PC; /*!< Offset: 0x010 Prescale Counter Register (R/W) */ __IO uint32_t MCR; /*!< Offset: 0x014 Match Control Register (R/W) */ __IO uint32_t MR0; /*!< Offset: 0x018 Match Register 0 (R/W) */ __IO uint32_t MR1; /*!< Offset: 0x01C Match Register 1 (R/W) */ __IO uint32_t MR2; /*!< Offset: 0x020 Match Register 2 (R/W) */ __IO uint32_t MR3; /*!< Offset: 0x024 Match Register 3 (R/W) */ __IO uint32_t CCR; /*!< Offset: 0x028 Capture Control Register (R/W) */ __I uint32_t CR0; /*!< Offset: 0x02C Capture Register 0 (R/ ) */ uint32_t RESERVED1[3]; __IO uint32_t EMR; /*!< Offset: 0x03C External Match Register (R/W) */ uint32_t RESERVED2[12]; __IO uint32_t CTCR; /*!< Offset: 0x070 Count Control Register (R/W) */ __IO uint32_t PWMC; /*!< Offset: 0x074 PWM Control Register (R/W) */ } LPC_TMR_TypeDef; /*@}*/ /* end of group LPC11xx_TMR */ /*------------- Universal Asynchronous Receiver Transmitter (UART) -----------*/ /** @addtogroup LPC11xx_UART LPC11xx Universal Asynchronous Receiver/Transmitter @{ */ typedef struct { union { __I uint32_t RBR; /*!< Offset: 0x000 Receiver Buffer Register (R/ ) */ __O uint32_t THR; /*!< Offset: 0x000 Transmit Holding Register ( /W) */ __IO uint32_t DLL; /*!< Offset: 0x000 Divisor Latch LSB (R/W) */ }; union { __IO uint32_t DLM; /*!< Offset: 0x004 Divisor Latch MSB (R/W) */ __IO uint32_t IER; /*!< Offset: 0x000 Interrupt Enable Register (R/W) */ }; union { __I uint32_t IIR; /*!< Offset: 0x008 Interrupt ID Register (R/ ) */ __O uint32_t FCR; /*!< Offset: 0x008 FIFO Control Register ( /W) */ }; __IO uint32_t LCR; /*!< Offset: 0x00C Line Control Register (R/W) */ __IO uint32_t MCR; /*!< Offset: 0x010 Modem control Register (R/W) */ __I uint32_t LSR; /*!< Offset: 0x014 Line Status Register (R/ ) */ __I uint32_t MSR; /*!< Offset: 0x018 Modem status Register (R/ ) */ __IO uint32_t SCR; /*!< Offset: 0x01C Scratch Pad Register (R/W) */ __IO uint32_t ACR; /*!< Offset: 0x020 Auto-baud Control Register (R/W) */ uint32_t RESERVED0; __IO uint32_t FDR; /*!< Offset: 0x028 Fractional Divider Register (R/W) */ uint32_t RESERVED1; __IO uint32_t TER; /*!< Offset: 0x030 Transmit Enable Register (R/W) */ uint32_t RESERVED2[6]; __IO uint32_t RS485CTRL; /*!< Offset: 0x04C RS-485/EIA-485 Control Register (R/W) */ __IO uint32_t ADRMATCH; /*!< Offset: 0x050 RS-485/EIA-485 address match Register (R/W) */ __IO uint32_t RS485DLY; /*!< Offset: 0x054 RS-485/EIA-485 direction control delay Register (R/W) */ __I uint32_t FIFOLVL; /*!< Offset: 0x058 FIFO Level Register (R/ ) */ } LPC_UART_TypeDef; /*@}*/ /* end of group LPC11xx_UART */ /*------------- Synchronous Serial Communication (SSP) -----------------------*/ /** @addtogroup LPC11xx_SSP LPC11xx Synchronous Serial Port @{ */ typedef struct { __IO uint32_t CR0; /*!< Offset: 0x000 Control Register 0 (R/W) */ __IO uint32_t CR1; /*!< Offset: 0x004 Control Register 1 (R/W) */ __IO uint32_t DR; /*!< Offset: 0x008 Data Register (R/W) */ __I uint32_t SR; /*!< Offset: 0x00C Status Registe (R/ ) */ __IO uint32_t CPSR; /*!< Offset: 0x010 Clock Prescale Register (R/W) */ __IO uint32_t IMSC; /*!< Offset: 0x014 Interrupt Mask Set and Clear Register (R/W) */ __IO uint32_t RIS; /*!< Offset: 0x018 Raw Interrupt Status Register (R/W) */ __IO uint32_t MIS; /*!< Offset: 0x01C Masked Interrupt Status Register (R/W) */ __IO uint32_t ICR; /*!< Offset: 0x020 SSPICR Interrupt Clear Register (R/W) */ } LPC_SSP_TypeDef; /*@}*/ /* end of group LPC11xx_SSP */ /*------------- Inter-Integrated Circuit (I2C) -------------------------------*/ /** @addtogroup LPC11xx_I2C LPC11xx I2C-Bus Interface @{ */ typedef struct { __IO uint32_t CONSET; /*!< Offset: 0x000 I2C Control Set Register (R/W) */ __I uint32_t STAT; /*!< Offset: 0x004 I2C Status Register (R/ ) */ __IO uint32_t DAT; /*!< Offset: 0x008 I2C Data Register (R/W) */ __IO uint32_t ADR0; /*!< Offset: 0x00C I2C Slave Address Register 0 (R/W) */ __IO uint32_t SCLH; /*!< Offset: 0x010 SCH Duty Cycle Register High Half Word (R/W) */ __IO uint32_t SCLL; /*!< Offset: 0x014 SCL Duty Cycle Register Low Half Word (R/W) */ __O uint32_t CONCLR; /*!< Offset: 0x018 I2C Control Clear Register ( /W) */ __IO uint32_t MMCTRL; /*!< Offset: 0x01C Monitor mode control register (R/W) */ __IO uint32_t ADR1; /*!< Offset: 0x020 I2C Slave Address Register 1 (R/W) */ __IO uint32_t ADR2; /*!< Offset: 0x024 I2C Slave Address Register 2 (R/W) */ __IO uint32_t ADR3; /*!< Offset: 0x028 I2C Slave Address Register 3 (R/W) */ __I uint32_t DATA_BUFFER; /*!< Offset: 0x02C Data buffer register ( /W) */ __IO uint32_t MASK0; /*!< Offset: 0x030 I2C Slave address mask register 0 (R/W) */ __IO uint32_t MASK1; /*!< Offset: 0x034 I2C Slave address mask register 1 (R/W) */ __IO uint32_t MASK2; /*!< Offset: 0x038 I2C Slave address mask register 2 (R/W) */ __IO uint32_t MASK3; /*!< Offset: 0x03C I2C Slave address mask register 3 (R/W) */ } LPC_I2C_TypeDef; /*@}*/ /* end of group LPC11xx_I2C */ /*------------- Watchdog Timer (WDT) -----------------------------------------*/ /** @addtogroup LPC11xx_WDT LPC11xx WatchDog Timer @{ */ typedef struct { __IO uint32_t MOD; /*!< Offset: 0x000 Watchdog mode register (R/W) */ __IO uint32_t TC; /*!< Offset: 0x004 Watchdog timer constant register (R/W) */ __O uint32_t FEED; /*!< Offset: 0x008 Watchdog feed sequence register ( /W) */ __I uint32_t TV; /*!< Offset: 0x00C Watchdog timer value register (R/ ) */ } LPC_WDT_TypeDef; /*@}*/ /* end of group LPC11xx_WDT */ /*------------- Analog-to-Digital Converter (ADC) ----------------------------*/ /** @addtogroup LPC11xx_ADC LPC11xx Analog-to-Digital Converter @{ */ typedef struct { __IO uint32_t CR; /*!< Offset: 0x000 A/D Control Register (R/W) */ __IO uint32_t GDR; /*!< Offset: 0x004 A/D Global Data Register (R/W) */ uint32_t RESERVED0; __IO uint32_t INTEN; /*!< Offset: 0x00C A/D Interrupt Enable Register (R/W) */ __IO uint32_t DR[8]; /*!< Offset: 0x010-0x02C A/D Channel 0..7 Data Register (R/W) */ __I uint32_t STAT; /*!< Offset: 0x030 A/D Status Register (R/ ) */ } LPC_ADC_TypeDef; /*@}*/ /* end of group LPC11xx_ADC */ #if defined ( __CC_ARM ) #pragma no_anon_unions #endif /******************************************************************************/ /* Peripheral memory map */ /******************************************************************************/ /* Base addresses */ #define LPC_FLASH_BASE (0x00000000UL) #define LPC_RAM_BASE (0x10000000UL) #define LPC_APB0_BASE (0x40000000UL) #define LPC_AHB_BASE (0x50000000UL) /* APB0 peripherals */ #define LPC_I2C_BASE (LPC_APB0_BASE + 0x00000) #define LPC_WDT_BASE (LPC_APB0_BASE + 0x04000) #define LPC_UART_BASE (LPC_APB0_BASE + 0x08000) #define LPC_CT16B0_BASE (LPC_APB0_BASE + 0x0C000) #define LPC_CT16B1_BASE (LPC_APB0_BASE + 0x10000) #define LPC_CT32B0_BASE (LPC_APB0_BASE + 0x14000) #define LPC_CT32B1_BASE (LPC_APB0_BASE + 0x18000) #define LPC_ADC_BASE (LPC_APB0_BASE + 0x1C000) #define LPC_PMU_BASE (LPC_APB0_BASE + 0x38000) #define LPC_SSP0_BASE (LPC_APB0_BASE + 0x40000) #define LPC_IOCON_BASE (LPC_APB0_BASE + 0x44000) #define LPC_SYSCON_BASE (LPC_APB0_BASE + 0x48000) #define LPC_SSP1_BASE (LPC_APB0_BASE + 0x58000) /* AHB peripherals */ #define LPC_GPIO_BASE (LPC_AHB_BASE + 0x00000) #define LPC_GPIO0_BASE (LPC_AHB_BASE + 0x00000) #define LPC_GPIO1_BASE (LPC_AHB_BASE + 0x10000) #define LPC_GPIO2_BASE (LPC_AHB_BASE + 0x20000) #define LPC_GPIO3_BASE (LPC_AHB_BASE + 0x30000) /******************************************************************************/ /* Peripheral declaration */ /******************************************************************************/ #define LPC_I2C ((LPC_I2C_TypeDef *) LPC_I2C_BASE ) #define LPC_WDT ((LPC_WDT_TypeDef *) LPC_WDT_BASE ) #define LPC_UART ((LPC_UART_TypeDef *) LPC_UART_BASE ) #define LPC_TMR16B0 ((LPC_TMR_TypeDef *) LPC_CT16B0_BASE) #define LPC_TMR16B1 ((LPC_TMR_TypeDef *) LPC_CT16B1_BASE) #define LPC_TMR32B0 ((LPC_TMR_TypeDef *) LPC_CT32B0_BASE) #define LPC_TMR32B1 ((LPC_TMR_TypeDef *) LPC_CT32B1_BASE) #define LPC_ADC ((LPC_ADC_TypeDef *) LPC_ADC_BASE ) #define LPC_PMU ((LPC_PMU_TypeDef *) LPC_PMU_BASE ) #define LPC_SSP0 ((LPC_SSP_TypeDef *) LPC_SSP0_BASE ) #define LPC_SSP1 ((LPC_SSP_TypeDef *) LPC_SSP1_BASE ) #define LPC_IOCON ((LPC_IOCON_TypeDef *) LPC_IOCON_BASE ) #define LPC_SYSCON ((LPC_SYSCON_TypeDef *) LPC_SYSCON_BASE) #define LPC_GPIO0 ((LPC_GPIO_TypeDef *) LPC_GPIO0_BASE ) #define LPC_GPIO1 ((LPC_GPIO_TypeDef *) LPC_GPIO1_BASE ) #define LPC_GPIO2 ((LPC_GPIO_TypeDef *) LPC_GPIO2_BASE ) #define LPC_GPIO3 ((LPC_GPIO_TypeDef *) LPC_GPIO3_BASE ) #ifdef __cplusplus } #endif #endif /* __LPC11xx_H__ */