//***************************************************************************** // // hw_sysctl.h - Macros used when accessing the system control hardware. // // Copyright (c) 2005-2020 Texas Instruments Incorporated. All rights reserved. // Software License Agreement // // Redistribution and use in source and binary forms, with or without // modification, are permitted provided that the following conditions // are met: // // Redistributions of source code must retain the above copyright // notice, this list of conditions and the following disclaimer. // // Redistributions in binary form must reproduce the above copyright // notice, this list of conditions and the following disclaimer in the // documentation and/or other materials provided with the // distribution. // // Neither the name of Texas Instruments Incorporated nor the names of // its contributors may be used to endorse or promote products derived // from this software without specific prior written permission. // // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS // "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT // LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR // A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT // OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, // SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT // LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, // DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT // (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE // OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. // // This is part of revision 2.2.0.295 of the Tiva Firmware Development Package. // //***************************************************************************** #ifndef __HW_SYSCTL_H__ #define __HW_SYSCTL_H__ //***************************************************************************** // // The following are defines for the System Control register addresses. // //***************************************************************************** #define SYSCTL_DID0 0x400FE000 // Device Identification 0 #define SYSCTL_DID1 0x400FE004 // Device Identification 1 #define SYSCTL_DC0 0x400FE008 // Device Capabilities 0 #define SYSCTL_DC1 0x400FE010 // Device Capabilities 1 #define SYSCTL_DC2 0x400FE014 // Device Capabilities 2 #define SYSCTL_DC3 0x400FE018 // Device Capabilities 3 #define SYSCTL_DC4 0x400FE01C // Device Capabilities 4 #define SYSCTL_DC5 0x400FE020 // Device Capabilities 5 #define SYSCTL_DC6 0x400FE024 // Device Capabilities 6 #define SYSCTL_DC7 0x400FE028 // Device Capabilities 7 #define SYSCTL_DC8 0x400FE02C // Device Capabilities 8 #define SYSCTL_PBORCTL 0x400FE030 // Brown-Out Reset Control #define SYSCTL_PTBOCTL 0x400FE038 // Power-Temp Brown Out Control #define SYSCTL_SRCR0 0x400FE040 // Software Reset Control 0 #define SYSCTL_SRCR1 0x400FE044 // Software Reset Control 1 #define SYSCTL_SRCR2 0x400FE048 // Software Reset Control 2 #define SYSCTL_RIS 0x400FE050 // Raw Interrupt Status #define SYSCTL_IMC 0x400FE054 // Interrupt Mask Control #define SYSCTL_MISC 0x400FE058 // Masked Interrupt Status and // Clear #define SYSCTL_RESC 0x400FE05C // Reset Cause #define SYSCTL_PWRTC 0x400FE060 // Power-Temperature Cause #define SYSCTL_RCC 0x400FE060 // Run-Mode Clock Configuration #define SYSCTL_NMIC 0x400FE064 // NMI Cause Register #define SYSCTL_GPIOHBCTL 0x400FE06C // GPIO High-Performance Bus // Control #define SYSCTL_RCC2 0x400FE070 // Run-Mode Clock Configuration 2 #define SYSCTL_MOSCCTL 0x400FE07C // Main Oscillator Control #define SYSCTL_RSCLKCFG 0x400FE0B0 // Run and Sleep Mode Configuration // Register #define SYSCTL_MEMTIM0 0x400FE0C0 // Memory Timing Parameter Register // 0 for Main Flash and EEPROM #define SYSCTL_RCGC0 0x400FE100 // Run Mode Clock Gating Control // Register 0 #define SYSCTL_RCGC1 0x400FE104 // Run Mode Clock Gating Control // Register 1 #define SYSCTL_RCGC2 0x400FE108 // Run Mode Clock Gating Control // Register 2 #define SYSCTL_SCGC0 0x400FE110 // Sleep Mode Clock Gating Control // Register 0 #define SYSCTL_SCGC1 0x400FE114 // Sleep Mode Clock Gating Control // Register 1 #define SYSCTL_SCGC2 0x400FE118 // Sleep Mode Clock Gating Control // Register 2 #define SYSCTL_DCGC0 0x400FE120 // Deep Sleep Mode Clock Gating // Control Register 0 #define SYSCTL_DCGC1 0x400FE124 // Deep-Sleep Mode Clock Gating // Control Register 1 #define SYSCTL_DCGC2 0x400FE128 // Deep Sleep Mode Clock Gating // Control Register 2 #define SYSCTL_ALTCLKCFG 0x400FE138 // Alternate Clock Configuration #define SYSCTL_DSLPCLKCFG 0x400FE144 // Deep Sleep Clock Configuration #define SYSCTL_DSCLKCFG 0x400FE144 // Deep Sleep Clock Configuration // Register #define SYSCTL_DIVSCLK 0x400FE148 // Divisor and Source Clock // Configuration #define SYSCTL_SYSPROP 0x400FE14C // System Properties #define SYSCTL_PIOSCCAL 0x400FE150 // Precision Internal Oscillator // Calibration #define SYSCTL_PIOSCSTAT 0x400FE154 // Precision Internal Oscillator // Statistics #define SYSCTL_PLLFREQ0 0x400FE160 // PLL Frequency 0 #define SYSCTL_PLLFREQ1 0x400FE164 // PLL Frequency 1 #define SYSCTL_PLLSTAT 0x400FE168 // PLL Status #define SYSCTL_SLPPWRCFG 0x400FE188 // Sleep Power Configuration #define SYSCTL_DSLPPWRCFG 0x400FE18C // Deep-Sleep Power Configuration #define SYSCTL_DC9 0x400FE190 // Device Capabilities 9 #define SYSCTL_NVMSTAT 0x400FE1A0 // Non-Volatile Memory Information #define SYSCTL_LDOSPCTL 0x400FE1B4 // LDO Sleep Power Control #define SYSCTL_LDODPCTL 0x400FE1BC // LDO Deep-Sleep Power Control #define SYSCTL_RESBEHAVCTL 0x400FE1D8 // Reset Behavior Control Register #define SYSCTL_HSSR 0x400FE1F4 // Hardware System Service Request #define SYSCTL_USBPDS 0x400FE280 // USB Power Domain Status #define SYSCTL_USBMPC 0x400FE284 // USB Memory Power Control #define SYSCTL_EMACPDS 0x400FE288 // Ethernet MAC Power Domain Status #define SYSCTL_EMACMPC 0x400FE28C // Ethernet MAC Memory Power // Control #define SYSCTL_LCDMPC 0x400FE294 // LCD Memory Power Control #define SYSCTL_PPWD 0x400FE300 // Watchdog Timer Peripheral // Present #define SYSCTL_PPTIMER 0x400FE304 // 16/32-Bit General-Purpose Timer // Peripheral Present #define SYSCTL_PPGPIO 0x400FE308 // General-Purpose Input/Output // Peripheral Present #define SYSCTL_PPDMA 0x400FE30C // Micro Direct Memory Access // Peripheral Present #define SYSCTL_PPEPI 0x400FE310 // EPI Peripheral Present #define SYSCTL_PPHIB 0x400FE314 // Hibernation Peripheral Present #define SYSCTL_PPUART 0x400FE318 // Universal Asynchronous // Receiver/Transmitter Peripheral // Present #define SYSCTL_PPSSI 0x400FE31C // Synchronous Serial Interface // Peripheral Present #define SYSCTL_PPI2C 0x400FE320 // Inter-Integrated Circuit // Peripheral Present #define SYSCTL_PPUSB 0x400FE328 // Universal Serial Bus Peripheral // Present #define SYSCTL_PPEPHY 0x400FE330 // Ethernet PHY Peripheral Present #define SYSCTL_PPCAN 0x400FE334 // Controller Area Network // Peripheral Present #define SYSCTL_PPADC 0x400FE338 // Analog-to-Digital Converter // Peripheral Present #define SYSCTL_PPACMP 0x400FE33C // Analog Comparator Peripheral // Present #define SYSCTL_PPPWM 0x400FE340 // Pulse Width Modulator Peripheral // Present #define SYSCTL_PPQEI 0x400FE344 // Quadrature Encoder Interface // Peripheral Present #define SYSCTL_PPLPC 0x400FE348 // Low Pin Count Interface // Peripheral Present #define SYSCTL_PPPECI 0x400FE350 // Platform Environment Control // Interface Peripheral Present #define SYSCTL_PPFAN 0x400FE354 // Fan Control Peripheral Present #define SYSCTL_PPEEPROM 0x400FE358 // EEPROM Peripheral Present #define SYSCTL_PPWTIMER 0x400FE35C // 32/64-Bit Wide General-Purpose // Timer Peripheral Present #define SYSCTL_PPRTS 0x400FE370 // Remote Temperature Sensor // Peripheral Present #define SYSCTL_PPCCM 0x400FE374 // CRC and Cryptographic Modules // Peripheral Present #define SYSCTL_PPLCD 0x400FE390 // LCD Peripheral Present #define SYSCTL_PPOWIRE 0x400FE398 // 1-Wire Peripheral Present #define SYSCTL_PPEMAC 0x400FE39C // Ethernet MAC Peripheral Present #define SYSCTL_PPHIM 0x400FE3A4 // Human Interface Master // Peripheral Present #define SYSCTL_SRWD 0x400FE500 // Watchdog Timer Software Reset #define SYSCTL_SRTIMER 0x400FE504 // 16/32-Bit General-Purpose Timer // Software Reset #define SYSCTL_SRGPIO 0x400FE508 // General-Purpose Input/Output // Software Reset #define SYSCTL_SRDMA 0x400FE50C // Micro Direct Memory Access // Software Reset #define SYSCTL_SREPI 0x400FE510 // EPI Software Reset #define SYSCTL_SRHIB 0x400FE514 // Hibernation Software Reset #define SYSCTL_SRUART 0x400FE518 // Universal Asynchronous // Receiver/Transmitter Software // Reset #define SYSCTL_SRSSI 0x400FE51C // Synchronous Serial Interface // Software Reset #define SYSCTL_SRI2C 0x400FE520 // Inter-Integrated Circuit // Software Reset #define SYSCTL_SRUSB 0x400FE528 // Universal Serial Bus Software // Reset #define SYSCTL_SREPHY 0x400FE530 // Ethernet PHY Software Reset #define SYSCTL_SRCAN 0x400FE534 // Controller Area Network Software // Reset #define SYSCTL_SRADC 0x400FE538 // Analog-to-Digital Converter // Software Reset #define SYSCTL_SRACMP 0x400FE53C // Analog Comparator Software Reset #define SYSCTL_SRPWM 0x400FE540 // Pulse Width Modulator Software // Reset #define SYSCTL_SRQEI 0x400FE544 // Quadrature Encoder Interface // Software Reset #define SYSCTL_SREEPROM 0x400FE558 // EEPROM Software Reset #define SYSCTL_SRWTIMER 0x400FE55C // 32/64-Bit Wide General-Purpose // Timer Software Reset #define SYSCTL_SRCCM 0x400FE574 // CRC and Cryptographic Modules // Software Reset #define SYSCTL_SRLCD 0x400FE590 // LCD Controller Software Reset #define SYSCTL_SROWIRE 0x400FE598 // 1-Wire Software Reset #define SYSCTL_SREMAC 0x400FE59C // Ethernet MAC Software Reset #define SYSCTL_RCGCWD 0x400FE600 // Watchdog Timer Run Mode Clock // Gating Control #define SYSCTL_RCGCTIMER 0x400FE604 // 16/32-Bit General-Purpose Timer // Run Mode Clock Gating Control #define SYSCTL_RCGCGPIO 0x400FE608 // General-Purpose Input/Output Run // Mode Clock Gating Control #define SYSCTL_RCGCDMA 0x400FE60C // Micro Direct Memory Access Run // Mode Clock Gating Control #define SYSCTL_RCGCEPI 0x400FE610 // EPI Run Mode Clock Gating // Control #define SYSCTL_RCGCHIB 0x400FE614 // Hibernation Run Mode Clock // Gating Control #define SYSCTL_RCGCUART 0x400FE618 // Universal Asynchronous // Receiver/Transmitter Run Mode // Clock Gating Control #define SYSCTL_RCGCSSI 0x400FE61C // Synchronous Serial Interface Run // Mode Clock Gating Control #define SYSCTL_RCGCI2C 0x400FE620 // Inter-Integrated Circuit Run // Mode Clock Gating Control #define SYSCTL_RCGCUSB 0x400FE628 // Universal Serial Bus Run Mode // Clock Gating Control #define SYSCTL_RCGCEPHY 0x400FE630 // Ethernet PHY Run Mode Clock // Gating Control #define SYSCTL_RCGCCAN 0x400FE634 // Controller Area Network Run Mode // Clock Gating Control #define SYSCTL_RCGCADC 0x400FE638 // Analog-to-Digital Converter Run // Mode Clock Gating Control #define SYSCTL_RCGCACMP 0x400FE63C // Analog Comparator Run Mode Clock // Gating Control #define SYSCTL_RCGCPWM 0x400FE640 // Pulse Width Modulator Run Mode // Clock Gating Control #define SYSCTL_RCGCQEI 0x400FE644 // Quadrature Encoder Interface Run // Mode Clock Gating Control #define SYSCTL_RCGCEEPROM 0x400FE658 // EEPROM Run Mode Clock Gating // Control #define SYSCTL_RCGCWTIMER 0x400FE65C // 32/64-Bit Wide General-Purpose // Timer Run Mode Clock Gating // Control #define SYSCTL_RCGCCCM 0x400FE674 // CRC and Cryptographic Modules // Run Mode Clock Gating Control #define SYSCTL_RCGCLCD 0x400FE690 // LCD Controller Run Mode Clock // Gating Control #define SYSCTL_RCGCOWIRE 0x400FE698 // 1-Wire Run Mode Clock Gating // Control #define SYSCTL_RCGCEMAC 0x400FE69C // Ethernet MAC Run Mode Clock // Gating Control #define SYSCTL_SCGCWD 0x400FE700 // Watchdog Timer Sleep Mode Clock // Gating Control #define SYSCTL_SCGCTIMER 0x400FE704 // 16/32-Bit General-Purpose Timer // Sleep Mode Clock Gating Control #define SYSCTL_SCGCGPIO 0x400FE708 // General-Purpose Input/Output // Sleep Mode Clock Gating Control #define SYSCTL_SCGCDMA 0x400FE70C // Micro Direct Memory Access Sleep // Mode Clock Gating Control #define SYSCTL_SCGCEPI 0x400FE710 // EPI Sleep Mode Clock Gating // Control #define SYSCTL_SCGCHIB 0x400FE714 // Hibernation Sleep Mode Clock // Gating Control #define SYSCTL_SCGCUART 0x400FE718 // Universal Asynchronous // Receiver/Transmitter Sleep Mode // Clock Gating Control #define SYSCTL_SCGCSSI 0x400FE71C // Synchronous Serial Interface // Sleep Mode Clock Gating Control #define SYSCTL_SCGCI2C 0x400FE720 // Inter-Integrated Circuit Sleep // Mode Clock Gating Control #define SYSCTL_SCGCUSB 0x400FE728 // Universal Serial Bus Sleep Mode // Clock Gating Control #define SYSCTL_SCGCEPHY 0x400FE730 // Ethernet PHY Sleep Mode Clock // Gating Control #define SYSCTL_SCGCCAN 0x400FE734 // Controller Area Network Sleep // Mode Clock Gating Control #define SYSCTL_SCGCADC 0x400FE738 // Analog-to-Digital Converter // Sleep Mode Clock Gating Control #define SYSCTL_SCGCACMP 0x400FE73C // Analog Comparator Sleep Mode // Clock Gating Control #define SYSCTL_SCGCPWM 0x400FE740 // Pulse Width Modulator Sleep Mode // Clock Gating Control #define SYSCTL_SCGCQEI 0x400FE744 // Quadrature Encoder Interface // Sleep Mode Clock Gating Control #define SYSCTL_SCGCEEPROM 0x400FE758 // EEPROM Sleep Mode Clock Gating // Control #define SYSCTL_SCGCWTIMER 0x400FE75C // 32/64-Bit Wide General-Purpose // Timer Sleep Mode Clock Gating // Control #define SYSCTL_SCGCCCM 0x400FE774 // CRC and Cryptographic Modules // Sleep Mode Clock Gating Control #define SYSCTL_SCGCLCD 0x400FE790 // LCD Controller Sleep Mode Clock // Gating Control #define SYSCTL_SCGCOWIRE 0x400FE798 // 1-Wire Sleep Mode Clock Gating // Control #define SYSCTL_SCGCEMAC 0x400FE79C // Ethernet MAC Sleep Mode Clock // Gating Control #define SYSCTL_DCGCWD 0x400FE800 // Watchdog Timer Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCTIMER 0x400FE804 // 16/32-Bit General-Purpose Timer // Deep-Sleep Mode Clock Gating // Control #define SYSCTL_DCGCGPIO 0x400FE808 // General-Purpose Input/Output // Deep-Sleep Mode Clock Gating // Control #define SYSCTL_DCGCDMA 0x400FE80C // Micro Direct Memory Access // Deep-Sleep Mode Clock Gating // Control #define SYSCTL_DCGCEPI 0x400FE810 // EPI Deep-Sleep Mode Clock Gating // Control #define SYSCTL_DCGCHIB 0x400FE814 // Hibernation Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCUART 0x400FE818 // Universal Asynchronous // Receiver/Transmitter Deep-Sleep // Mode Clock Gating Control #define SYSCTL_DCGCSSI 0x400FE81C // Synchronous Serial Interface // Deep-Sleep Mode Clock Gating // Control #define SYSCTL_DCGCI2C 0x400FE820 // Inter-Integrated Circuit // Deep-Sleep Mode Clock Gating // Control #define SYSCTL_DCGCUSB 0x400FE828 // Universal Serial Bus Deep-Sleep // Mode Clock Gating Control #define SYSCTL_DCGCEPHY 0x400FE830 // Ethernet PHY Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCCAN 0x400FE834 // Controller Area Network // Deep-Sleep Mode Clock Gating // Control #define SYSCTL_DCGCADC 0x400FE838 // Analog-to-Digital Converter // Deep-Sleep Mode Clock Gating // Control #define SYSCTL_DCGCACMP 0x400FE83C // Analog Comparator Deep-Sleep // Mode Clock Gating Control #define SYSCTL_DCGCPWM 0x400FE840 // Pulse Width Modulator Deep-Sleep // Mode Clock Gating Control #define SYSCTL_DCGCQEI 0x400FE844 // Quadrature Encoder Interface // Deep-Sleep Mode Clock Gating // Control #define SYSCTL_DCGCEEPROM 0x400FE858 // EEPROM Deep-Sleep Mode Clock // Gating Control #define SYSCTL_DCGCWTIMER 0x400FE85C // 32/64-Bit Wide General-Purpose // Timer Deep-Sleep Mode Clock // Gating Control #define SYSCTL_DCGCCCM 0x400FE874 // CRC and Cryptographic Modules // Deep-Sleep Mode Clock Gating // Control #define SYSCTL_DCGCLCD 0x400FE890 // LCD Controller Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCOWIRE 0x400FE898 // 1-Wire Deep-Sleep Mode Clock // Gating Control #define SYSCTL_DCGCEMAC 0x400FE89C // Ethernet MAC Deep-Sleep Mode // Clock Gating Control #define SYSCTL_PCWD 0x400FE900 // Watchdog Timer Power Control #define SYSCTL_PCTIMER 0x400FE904 // 16/32-Bit General-Purpose Timer // Power Control #define SYSCTL_PCGPIO 0x400FE908 // General-Purpose Input/Output // Power Control #define SYSCTL_PCDMA 0x400FE90C // Micro Direct Memory Access Power // Control #define SYSCTL_PCEPI 0x400FE910 // External Peripheral Interface // Power Control #define SYSCTL_PCHIB 0x400FE914 // Hibernation Power Control #define SYSCTL_PCUART 0x400FE918 // Universal Asynchronous // Receiver/Transmitter Power // Control #define SYSCTL_PCSSI 0x400FE91C // Synchronous Serial Interface // Power Control #define SYSCTL_PCI2C 0x400FE920 // Inter-Integrated Circuit Power // Control #define SYSCTL_PCUSB 0x400FE928 // Universal Serial Bus Power // Control #define SYSCTL_PCEPHY 0x400FE930 // Ethernet PHY Power Control #define SYSCTL_PCCAN 0x400FE934 // Controller Area Network Power // Control #define SYSCTL_PCADC 0x400FE938 // Analog-to-Digital Converter // Power Control #define SYSCTL_PCACMP 0x400FE93C // Analog Comparator Power Control #define SYSCTL_PCPWM 0x400FE940 // Pulse Width Modulator Power // Control #define SYSCTL_PCQEI 0x400FE944 // Quadrature Encoder Interface // Power Control #define SYSCTL_PCEEPROM 0x400FE958 // EEPROM Power Control #define SYSCTL_PCCCM 0x400FE974 // CRC and Cryptographic Modules // Power Control #define SYSCTL_PCLCD 0x400FE990 // LCD Controller Power Control #define SYSCTL_PCOWIRE 0x400FE998 // 1-Wire Power Control #define SYSCTL_PCEMAC 0x400FE99C // Ethernet MAC Power Control #define SYSCTL_PRWD 0x400FEA00 // Watchdog Timer Peripheral Ready #define SYSCTL_PRTIMER 0x400FEA04 // 16/32-Bit General-Purpose Timer // Peripheral Ready #define SYSCTL_PRGPIO 0x400FEA08 // General-Purpose Input/Output // Peripheral Ready #define SYSCTL_PRDMA 0x400FEA0C // Micro Direct Memory Access // Peripheral Ready #define SYSCTL_PREPI 0x400FEA10 // EPI Peripheral Ready #define SYSCTL_PRHIB 0x400FEA14 // Hibernation Peripheral Ready #define SYSCTL_PRUART 0x400FEA18 // Universal Asynchronous // Receiver/Transmitter Peripheral // Ready #define SYSCTL_PRSSI 0x400FEA1C // Synchronous Serial Interface // Peripheral Ready #define SYSCTL_PRI2C 0x400FEA20 // Inter-Integrated Circuit // Peripheral Ready #define SYSCTL_PRUSB 0x400FEA28 // Universal Serial Bus Peripheral // Ready #define SYSCTL_PREPHY 0x400FEA30 // Ethernet PHY Peripheral Ready #define SYSCTL_PRCAN 0x400FEA34 // Controller Area Network // Peripheral Ready #define SYSCTL_PRADC 0x400FEA38 // Analog-to-Digital Converter // Peripheral Ready #define SYSCTL_PRACMP 0x400FEA3C // Analog Comparator Peripheral // Ready #define SYSCTL_PRPWM 0x400FEA40 // Pulse Width Modulator Peripheral // Ready #define SYSCTL_PRQEI 0x400FEA44 // Quadrature Encoder Interface // Peripheral Ready #define SYSCTL_PREEPROM 0x400FEA58 // EEPROM Peripheral Ready #define SYSCTL_PRWTIMER 0x400FEA5C // 32/64-Bit Wide General-Purpose // Timer Peripheral Ready #define SYSCTL_PRCCM 0x400FEA74 // CRC and Cryptographic Modules // Peripheral Ready #define SYSCTL_PRLCD 0x400FEA90 // LCD Controller Peripheral Ready #define SYSCTL_PROWIRE 0x400FEA98 // 1-Wire Peripheral Ready #define SYSCTL_PREMAC 0x400FEA9C // Ethernet MAC Peripheral Ready #define SYSCTL_UNIQUEID0 0x400FEF20 // Unique ID 0 #define SYSCTL_UNIQUEID1 0x400FEF24 // Unique ID 1 #define SYSCTL_UNIQUEID2 0x400FEF28 // Unique ID 2 #define SYSCTL_UNIQUEID3 0x400FEF2C // Unique ID 3 #define SYSCTL_CCMCGREQ 0x44030204 // Cryptographic Modules Clock // Gating Request //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_DID0 register. // //***************************************************************************** #define SYSCTL_DID0_VER_M 0x70000000 // DID0 Version #define SYSCTL_DID0_VER_1 0x10000000 // Second version of the DID0 // register format. #define SYSCTL_DID0_CLASS_M 0x00FF0000 // Device Class #define SYSCTL_DID0_CLASS_TM4C123 \ 0x00050000 // Tiva TM4C123x and TM4E123x // microcontrollers #define SYSCTL_DID0_CLASS_TM4C129 \ 0x000A0000 // Tiva(TM) TM4C129-class // microcontrollers #define SYSCTL_DID0_MAJ_M 0x0000FF00 // Major Revision #define SYSCTL_DID0_MAJ_REVA 0x00000000 // Revision A (initial device) #define SYSCTL_DID0_MAJ_REVB 0x00000100 // Revision B (first base layer // revision) #define SYSCTL_DID0_MAJ_REVC 0x00000200 // Revision C (second base layer // revision) #define SYSCTL_DID0_MIN_M 0x000000FF // Minor Revision #define SYSCTL_DID0_MIN_0 0x00000000 // Initial device, or a major // revision update #define SYSCTL_DID0_MIN_1 0x00000001 // First metal layer change #define SYSCTL_DID0_MIN_2 0x00000002 // Second metal layer change //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_DID1 register. // //***************************************************************************** #define SYSCTL_DID1_VER_M 0xF0000000 // DID1 Version #define SYSCTL_DID1_VER_1 0x10000000 // fury_ib #define SYSCTL_DID1_FAM_M 0x0F000000 // Family #define SYSCTL_DID1_FAM_TIVA 0x00000000 // Tiva family of microcontollers #define SYSCTL_DID1_PRTNO_M 0x00FF0000 // Part Number #define SYSCTL_DID1_PRTNO_TM4C1230C3PM \ 0x00220000 // TM4C1230C3PM #define SYSCTL_DID1_PRTNO_TM4C1230D5PM \ 0x00230000 // TM4C1230D5PM #define SYSCTL_DID1_PRTNO_TM4C1230E6PM \ 0x00200000 // TM4C1230E6PM #define SYSCTL_DID1_PRTNO_TM4C1230H6PM \ 0x00210000 // TM4C1230H6PM #define SYSCTL_DID1_PRTNO_TM4C1231C3PM \ 0x00180000 // TM4C1231C3PM #define SYSCTL_DID1_PRTNO_TM4C1231D5PM \ 0x00190000 // TM4C1231D5PM #define SYSCTL_DID1_PRTNO_TM4C1231D5PZ \ 0x00360000 // TM4C1231D5PZ #define SYSCTL_DID1_PRTNO_TM4C1231E6PM \ 0x00100000 // TM4C1231E6PM #define SYSCTL_DID1_PRTNO_TM4C1231E6PZ \ 0x00300000 // TM4C1231E6PZ #define SYSCTL_DID1_PRTNO_TM4C1231H6PGE \ 0x00350000 // TM4C1231H6PGE #define SYSCTL_DID1_PRTNO_TM4C1231H6PM \ 0x00110000 // TM4C1231H6PM #define SYSCTL_DID1_PRTNO_TM4C1231H6PZ \ 0x00310000 // TM4C1231H6PZ #define SYSCTL_DID1_PRTNO_TM4C1232C3PM \ 0x00080000 // TM4C1232C3PM #define SYSCTL_DID1_PRTNO_TM4C1232D5PM \ 0x00090000 // TM4C1232D5PM #define SYSCTL_DID1_PRTNO_TM4C1232E6PM \ 0x000A0000 // TM4C1232E6PM #define SYSCTL_DID1_PRTNO_TM4C1232H6PM \ 0x000B0000 // TM4C1232H6PM #define SYSCTL_DID1_PRTNO_TM4C1233C3PM \ 0x00010000 // TM4C1233C3PM #define SYSCTL_DID1_PRTNO_TM4C1233D5PM \ 0x00020000 // TM4C1233D5PM #define SYSCTL_DID1_PRTNO_TM4C1233D5PZ \ 0x00D00000 // TM4C1233D5PZ #define SYSCTL_DID1_PRTNO_TM4C1233E6PM \ 0x00030000 // TM4C1233E6PM #define SYSCTL_DID1_PRTNO_TM4C1233E6PZ \ 0x00D10000 // TM4C1233E6PZ #define SYSCTL_DID1_PRTNO_TM4C1233H6PGE \ 0x00D60000 // TM4C1233H6PGE #define SYSCTL_DID1_PRTNO_TM4C1233H6PM \ 0x00040000 // TM4C1233H6PM #define SYSCTL_DID1_PRTNO_TM4C1233H6PZ \ 0x00D20000 // TM4C1233H6PZ #define SYSCTL_DID1_PRTNO_TM4C1236D5PM \ 0x00520000 // TM4C1236D5PM #define SYSCTL_DID1_PRTNO_TM4C1236E6PM \ 0x00500000 // TM4C1236E6PM #define SYSCTL_DID1_PRTNO_TM4C1236H6PM \ 0x00510000 // TM4C1236H6PM #define SYSCTL_DID1_PRTNO_TM4C1237D5PM \ 0x00480000 // TM4C1237D5PM #define SYSCTL_DID1_PRTNO_TM4C1237D5PZ \ 0x00660000 // TM4C1237D5PZ #define SYSCTL_DID1_PRTNO_TM4C1237E6PM \ 0x00400000 // TM4C1237E6PM #define SYSCTL_DID1_PRTNO_TM4C1237E6PZ \ 0x00600000 // TM4C1237E6PZ #define SYSCTL_DID1_PRTNO_TM4C1237H6PGE \ 0x00650000 // TM4C1237H6PGE #define SYSCTL_DID1_PRTNO_TM4C1237H6PM \ 0x00410000 // TM4C1237H6PM #define SYSCTL_DID1_PRTNO_TM4C1237H6PZ \ 0x00610000 // TM4C1237H6PZ #define SYSCTL_DID1_PRTNO_TM4C123AE6PM \ 0x00800000 // TM4C123AE6PM #define SYSCTL_DID1_PRTNO_TM4C123AH6PM \ 0x00830000 // TM4C123AH6PM #define SYSCTL_DID1_PRTNO_TM4C123BE6PM \ 0x00700000 // TM4C123BE6PM #define SYSCTL_DID1_PRTNO_TM4C123BE6PZ \ 0x00C30000 // TM4C123BE6PZ #define SYSCTL_DID1_PRTNO_TM4C123BH6PGE \ 0x00C60000 // TM4C123BH6PGE #define SYSCTL_DID1_PRTNO_TM4C123BH6PM \ 0x00730000 // TM4C123BH6PM #define SYSCTL_DID1_PRTNO_TM4C123BH6PZ \ 0x00C40000 // TM4C123BH6PZ #define SYSCTL_DID1_PRTNO_TM4C123BH6ZRB \ 0x00E90000 // TM4C123BH6ZRB #define SYSCTL_DID1_PRTNO_TM4C123FE6PM \ 0x00B00000 // TM4C123FE6PM #define SYSCTL_DID1_PRTNO_TM4C123FH6PM \ 0x00B10000 // TM4C123FH6PM #define SYSCTL_DID1_PRTNO_TM4C123GE6PM \ 0x00A00000 // TM4C123GE6PM #define SYSCTL_DID1_PRTNO_TM4C123GE6PZ \ 0x00C00000 // TM4C123GE6PZ #define SYSCTL_DID1_PRTNO_TM4C123GH6PGE \ 0x00C50000 // TM4C123GH6PGE #define SYSCTL_DID1_PRTNO_TM4C123GH6PM \ 0x00A10000 // TM4C123GH6PM #define SYSCTL_DID1_PRTNO_TM4C123GH6PZ \ 0x00C10000 // TM4C123GH6PZ #define SYSCTL_DID1_PRTNO_TM4C123GH6ZRB \ 0x00E30000 // TM4C123GH6ZRB #define SYSCTL_DID1_PRTNO_TM4C1290NCPDT \ 0x00190000 // TM4C1290NCPDT #define SYSCTL_DID1_PRTNO_TM4C1290NCZAD \ 0x001B0000 // TM4C1290NCZAD #define SYSCTL_DID1_PRTNO_TM4C1292NCPDT \ 0x001C0000 // TM4C1292NCPDT #define SYSCTL_DID1_PRTNO_TM4C1292NCZAD \ 0x001E0000 // TM4C1292NCZAD #define SYSCTL_DID1_PRTNO_TM4C1294KCPDT \ 0x00340000 // TM4C1294KCPDT #define SYSCTL_DID1_PRTNO_TM4C1294NCPDT \ 0x001F0000 // TM4C1294NCPDT #define SYSCTL_DID1_PRTNO_TM4C1294NCZAD \ 0x00210000 // TM4C1294NCZAD #define SYSCTL_DID1_PRTNO_TM4C1297NCZAD \ 0x00220000 // TM4C1297NCZAD #define SYSCTL_DID1_PRTNO_TM4C1299KCZAD \ 0x00360000 // TM4C1299KCZAD #define SYSCTL_DID1_PRTNO_TM4C1299NCZAD \ 0x00230000 // TM4C1299NCZAD #define SYSCTL_DID1_PRTNO_TM4C129CNCPDT \ 0x00240000 // TM4C129CNCPDT #define SYSCTL_DID1_PRTNO_TM4C129CNCZAD \ 0x00260000 // TM4C129CNCZAD #define SYSCTL_DID1_PRTNO_TM4C129DNCPDT \ 0x00270000 // TM4C129DNCPDT #define SYSCTL_DID1_PRTNO_TM4C129DNCZAD \ 0x00290000 // TM4C129DNCZAD #define SYSCTL_DID1_PRTNO_TM4C129EKCPDT \ 0x00350000 // TM4C129EKCPDT #define SYSCTL_DID1_PRTNO_TM4C129ENCPDT \ 0x002D0000 // TM4C129ENCPDT #define SYSCTL_DID1_PRTNO_TM4C129ENCZAD \ 0x002F0000 // TM4C129ENCZAD #define SYSCTL_DID1_PRTNO_TM4C129LNCZAD \ 0x00300000 // TM4C129LNCZAD #define SYSCTL_DID1_PRTNO_TM4C129XKCZAD \ 0x00370000 // TM4C129XKCZAD #define SYSCTL_DID1_PRTNO_TM4C129XNCZAD \ 0x00320000 // TM4C129XNCZAD #define SYSCTL_DID1_PINCNT_M 0x0000E000 // Package Pin Count #define SYSCTL_DID1_PINCNT_100 0x00004000 // 100-pin LQFP package #define SYSCTL_DID1_PINCNT_64 0x00006000 // 64-pin LQFP package #define SYSCTL_DID1_PINCNT_144 0x00008000 // 144-pin LQFP package #define SYSCTL_DID1_PINCNT_157 0x0000A000 // 157-pin BGA package #define SYSCTL_DID1_PINCNT_128 0x0000C000 // 128-pin TQFP package #define SYSCTL_DID1_TEMP_M 0x000000E0 // Temperature Range #define SYSCTL_DID1_TEMP_C 0x00000000 // Commercial temperature range #define SYSCTL_DID1_TEMP_I 0x00000020 // Industrial temperature range #define SYSCTL_DID1_TEMP_E 0x00000040 // Extended temperature range #define SYSCTL_DID1_TEMP_IE 0x00000060 // Available in both industrial // temperature range (-40C to 85C) // and extended temperature range // (-40C to 105C) devices. See #define SYSCTL_DID1_PKG_M 0x00000018 // Package Type #define SYSCTL_DID1_PKG_QFP 0x00000008 // QFP package #define SYSCTL_DID1_PKG_BGA 0x00000010 // BGA package #define SYSCTL_DID1_ROHS 0x00000004 // RoHS-Compliance #define SYSCTL_DID1_QUAL_M 0x00000003 // Qualification Status #define SYSCTL_DID1_QUAL_ES 0x00000000 // Engineering Sample (unqualified) #define SYSCTL_DID1_QUAL_PP 0x00000001 // Pilot Production (unqualified) #define SYSCTL_DID1_QUAL_FQ 0x00000002 // Fully Qualified //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_DC0 register. // //***************************************************************************** #define SYSCTL_DC0_SRAMSZ_M 0xFFFF0000 // SRAM Size #define SYSCTL_DC0_SRAMSZ_2KB 0x00070000 // 2 KB of SRAM #define SYSCTL_DC0_SRAMSZ_4KB 0x000F0000 // 4 KB of SRAM #define SYSCTL_DC0_SRAMSZ_6KB 0x00170000 // 6 KB of SRAM #define SYSCTL_DC0_SRAMSZ_8KB 0x001F0000 // 8 KB of SRAM #define SYSCTL_DC0_SRAMSZ_12KB 0x002F0000 // 12 KB of SRAM #define SYSCTL_DC0_SRAMSZ_16KB 0x003F0000 // 16 KB of SRAM #define SYSCTL_DC0_SRAMSZ_20KB 0x004F0000 // 20 KB of SRAM #define SYSCTL_DC0_SRAMSZ_24KB 0x005F0000 // 24 KB of SRAM #define SYSCTL_DC0_SRAMSZ_32KB 0x007F0000 // 32 KB of SRAM #define SYSCTL_DC0_FLASHSZ_M 0x0000FFFF // Flash Size #define SYSCTL_DC0_FLASHSZ_8KB 0x00000003 // 8 KB of Flash #define SYSCTL_DC0_FLASHSZ_16KB 0x00000007 // 16 KB of Flash #define SYSCTL_DC0_FLASHSZ_32KB 0x0000000F // 32 KB of Flash #define SYSCTL_DC0_FLASHSZ_64KB 0x0000001F // 64 KB of Flash #define SYSCTL_DC0_FLASHSZ_96KB 0x0000002F // 96 KB of Flash #define SYSCTL_DC0_FLASHSZ_128K 0x0000003F // 128 KB of Flash #define SYSCTL_DC0_FLASHSZ_192K 0x0000005F // 192 KB of Flash #define SYSCTL_DC0_FLASHSZ_256K 0x0000007F // 256 KB of Flash //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_DC1 register. // //***************************************************************************** #define SYSCTL_DC1_WDT1 0x10000000 // Watchdog Timer1 Present #define SYSCTL_DC1_CAN1 0x02000000 // CAN Module 1 Present #define SYSCTL_DC1_CAN0 0x01000000 // CAN Module 0 Present #define SYSCTL_DC1_PWM1 0x00200000 // PWM Module 1 Present #define SYSCTL_DC1_PWM0 0x00100000 // PWM Module 0 Present #define SYSCTL_DC1_ADC1 0x00020000 // ADC Module 1 Present #define SYSCTL_DC1_ADC0 0x00010000 // ADC Module 0 Present #define SYSCTL_DC1_MINSYSDIV_M 0x0000F000 // System Clock Divider #define SYSCTL_DC1_MINSYSDIV_80 0x00002000 // Specifies an 80-MHz CPU clock // with a PLL divider of 2.5 #define SYSCTL_DC1_MINSYSDIV_50 0x00003000 // Specifies a 50-MHz CPU clock // with a PLL divider of 4 #define SYSCTL_DC1_MINSYSDIV_40 0x00004000 // Specifies a 40-MHz CPU clock // with a PLL divider of 5 #define SYSCTL_DC1_MINSYSDIV_25 0x00007000 // Specifies a 25-MHz clock with a // PLL divider of 8 #define SYSCTL_DC1_MINSYSDIV_20 0x00009000 // Specifies a 20-MHz clock with a // PLL divider of 10 #define SYSCTL_DC1_ADC1SPD_M 0x00000C00 // Max ADC1 Speed #define SYSCTL_DC1_ADC1SPD_125K 0x00000000 // 125K samples/second #define SYSCTL_DC1_ADC1SPD_250K 0x00000400 // 250K samples/second #define SYSCTL_DC1_ADC1SPD_500K 0x00000800 // 500K samples/second #define SYSCTL_DC1_ADC1SPD_1M 0x00000C00 // 1M samples/second #define SYSCTL_DC1_ADC0SPD_M 0x00000300 // Max ADC0 Speed #define SYSCTL_DC1_ADC0SPD_125K 0x00000000 // 125K samples/second #define SYSCTL_DC1_ADC0SPD_250K 0x00000100 // 250K samples/second #define SYSCTL_DC1_ADC0SPD_500K 0x00000200 // 500K samples/second #define SYSCTL_DC1_ADC0SPD_1M 0x00000300 // 1M samples/second #define SYSCTL_DC1_MPU 0x00000080 // MPU Present #define SYSCTL_DC1_HIB 0x00000040 // Hibernation Module Present #define SYSCTL_DC1_TEMP 0x00000020 // Temp Sensor Present #define SYSCTL_DC1_PLL 0x00000010 // PLL Present #define SYSCTL_DC1_WDT0 0x00000008 // Watchdog Timer 0 Present #define SYSCTL_DC1_SWO 0x00000004 // SWO Trace Port Present #define SYSCTL_DC1_SWD 0x00000002 // SWD Present #define SYSCTL_DC1_JTAG 0x00000001 // JTAG Present //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_DC2 register. // //***************************************************************************** #define SYSCTL_DC2_EPI0 0x40000000 // EPI Module 0 Present #define SYSCTL_DC2_I2S0 0x10000000 // I2S Module 0 Present #define SYSCTL_DC2_COMP2 0x04000000 // Analog Comparator 2 Present #define SYSCTL_DC2_COMP1 0x02000000 // Analog Comparator 1 Present #define SYSCTL_DC2_COMP0 0x01000000 // Analog Comparator 0 Present #define SYSCTL_DC2_TIMER3 0x00080000 // Timer Module 3 Present #define SYSCTL_DC2_TIMER2 0x00040000 // Timer Module 2 Present #define SYSCTL_DC2_TIMER1 0x00020000 // Timer Module 1 Present #define SYSCTL_DC2_TIMER0 0x00010000 // Timer Module 0 Present #define SYSCTL_DC2_I2C1HS 0x00008000 // I2C Module 1 Speed #define SYSCTL_DC2_I2C1 0x00004000 // I2C Module 1 Present #define SYSCTL_DC2_I2C0HS 0x00002000 // I2C Module 0 Speed #define SYSCTL_DC2_I2C0 0x00001000 // I2C Module 0 Present #define SYSCTL_DC2_QEI1 0x00000200 // QEI Module 1 Present #define SYSCTL_DC2_QEI0 0x00000100 // QEI Module 0 Present #define SYSCTL_DC2_SSI1 0x00000020 // SSI Module 1 Present #define SYSCTL_DC2_SSI0 0x00000010 // SSI Module 0 Present #define SYSCTL_DC2_UART2 0x00000004 // UART Module 2 Present #define SYSCTL_DC2_UART1 0x00000002 // UART Module 1 Present #define SYSCTL_DC2_UART0 0x00000001 // UART Module 0 Present //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_DC3 register. // //***************************************************************************** #define SYSCTL_DC3_32KHZ 0x80000000 // 32KHz Input Clock Available #define SYSCTL_DC3_CCP5 0x20000000 // T2CCP1 Pin Present #define SYSCTL_DC3_CCP4 0x10000000 // T2CCP0 Pin Present #define SYSCTL_DC3_CCP3 0x08000000 // T1CCP1 Pin Present #define SYSCTL_DC3_CCP2 0x04000000 // T1CCP0 Pin Present #define SYSCTL_DC3_CCP1 0x02000000 // T0CCP1 Pin Present #define SYSCTL_DC3_CCP0 0x01000000 // T0CCP0 Pin Present #define SYSCTL_DC3_ADC0AIN7 0x00800000 // ADC Module 0 AIN7 Pin Present #define SYSCTL_DC3_ADC0AIN6 0x00400000 // ADC Module 0 AIN6 Pin Present #define SYSCTL_DC3_ADC0AIN5 0x00200000 // ADC Module 0 AIN5 Pin Present #define SYSCTL_DC3_ADC0AIN4 0x00100000 // ADC Module 0 AIN4 Pin Present #define SYSCTL_DC3_ADC0AIN3 0x00080000 // ADC Module 0 AIN3 Pin Present #define SYSCTL_DC3_ADC0AIN2 0x00040000 // ADC Module 0 AIN2 Pin Present #define SYSCTL_DC3_ADC0AIN1 0x00020000 // ADC Module 0 AIN1 Pin Present #define SYSCTL_DC3_ADC0AIN0 0x00010000 // ADC Module 0 AIN0 Pin Present #define SYSCTL_DC3_PWMFAULT 0x00008000 // PWM Fault Pin Present #define SYSCTL_DC3_C2O 0x00004000 // C2o Pin Present #define SYSCTL_DC3_C2PLUS 0x00002000 // C2+ Pin Present #define SYSCTL_DC3_C2MINUS 0x00001000 // C2- Pin Present #define SYSCTL_DC3_C1O 0x00000800 // C1o Pin Present #define SYSCTL_DC3_C1PLUS 0x00000400 // C1+ Pin Present #define SYSCTL_DC3_C1MINUS 0x00000200 // C1- Pin Present #define SYSCTL_DC3_C0O 0x00000100 // C0o Pin Present #define SYSCTL_DC3_C0PLUS 0x00000080 // C0+ Pin Present #define SYSCTL_DC3_C0MINUS 0x00000040 // C0- Pin Present #define SYSCTL_DC3_PWM5 0x00000020 // PWM5 Pin Present #define SYSCTL_DC3_PWM4 0x00000010 // PWM4 Pin Present #define SYSCTL_DC3_PWM3 0x00000008 // PWM3 Pin Present #define SYSCTL_DC3_PWM2 0x00000004 // PWM2 Pin Present #define SYSCTL_DC3_PWM1 0x00000002 // PWM1 Pin Present #define SYSCTL_DC3_PWM0 0x00000001 // PWM0 Pin Present //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_DC4 register. // //***************************************************************************** #define SYSCTL_DC4_EPHY0 0x40000000 // Ethernet PHY Layer 0 Present #define SYSCTL_DC4_EMAC0 0x10000000 // Ethernet MAC Layer 0 Present #define SYSCTL_DC4_E1588 0x01000000 // 1588 Capable #define SYSCTL_DC4_PICAL 0x00040000 // PIOSC Calibrate #define SYSCTL_DC4_CCP7 0x00008000 // T3CCP1 Pin Present #define SYSCTL_DC4_CCP6 0x00004000 // T3CCP0 Pin Present #define SYSCTL_DC4_UDMA 0x00002000 // Micro-DMA Module Present #define SYSCTL_DC4_ROM 0x00001000 // Internal Code ROM Present #define SYSCTL_DC4_GPIOJ 0x00000100 // GPIO Port J Present #define SYSCTL_DC4_GPIOH 0x00000080 // GPIO Port H Present #define SYSCTL_DC4_GPIOG 0x00000040 // GPIO Port G Present #define SYSCTL_DC4_GPIOF 0x00000020 // GPIO Port F Present #define SYSCTL_DC4_GPIOE 0x00000010 // GPIO Port E Present #define SYSCTL_DC4_GPIOD 0x00000008 // GPIO Port D Present #define SYSCTL_DC4_GPIOC 0x00000004 // GPIO Port C Present #define SYSCTL_DC4_GPIOB 0x00000002 // GPIO Port B Present #define SYSCTL_DC4_GPIOA 0x00000001 // GPIO Port A Present //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_DC5 register. // //***************************************************************************** #define SYSCTL_DC5_PWMFAULT3 0x08000000 // PWM Fault 3 Pin Present #define SYSCTL_DC5_PWMFAULT2 0x04000000 // PWM Fault 2 Pin Present #define SYSCTL_DC5_PWMFAULT1 0x02000000 // PWM Fault 1 Pin Present #define SYSCTL_DC5_PWMFAULT0 0x01000000 // PWM Fault 0 Pin Present #define SYSCTL_DC5_PWMEFLT 0x00200000 // PWM Extended Fault Active #define SYSCTL_DC5_PWMESYNC 0x00100000 // PWM Extended SYNC Active #define SYSCTL_DC5_PWM7 0x00000080 // PWM7 Pin Present #define SYSCTL_DC5_PWM6 0x00000040 // PWM6 Pin Present #define SYSCTL_DC5_PWM5 0x00000020 // PWM5 Pin Present #define SYSCTL_DC5_PWM4 0x00000010 // PWM4 Pin Present #define SYSCTL_DC5_PWM3 0x00000008 // PWM3 Pin Present #define SYSCTL_DC5_PWM2 0x00000004 // PWM2 Pin Present #define SYSCTL_DC5_PWM1 0x00000002 // PWM1 Pin Present #define SYSCTL_DC5_PWM0 0x00000001 // PWM0 Pin Present //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_DC6 register. // //***************************************************************************** #define SYSCTL_DC6_USB0PHY 0x00000010 // USB Module 0 PHY Present #define SYSCTL_DC6_USB0_M 0x00000003 // USB Module 0 Present #define SYSCTL_DC6_USB0_DEV 0x00000001 // USB0 is Device Only #define SYSCTL_DC6_USB0_HOSTDEV 0x00000002 // USB is Device or Host #define SYSCTL_DC6_USB0_OTG 0x00000003 // USB0 is OTG //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_DC7 register. // //***************************************************************************** #define SYSCTL_DC7_DMACH30 0x40000000 // DMA Channel 30 #define SYSCTL_DC7_DMACH29 0x20000000 // DMA Channel 29 #define SYSCTL_DC7_DMACH28 0x10000000 // DMA Channel 28 #define SYSCTL_DC7_DMACH27 0x08000000 // DMA Channel 27 #define SYSCTL_DC7_DMACH26 0x04000000 // DMA Channel 26 #define SYSCTL_DC7_DMACH25 0x02000000 // DMA Channel 25 #define SYSCTL_DC7_DMACH24 0x01000000 // DMA Channel 24 #define SYSCTL_DC7_DMACH23 0x00800000 // DMA Channel 23 #define SYSCTL_DC7_DMACH22 0x00400000 // DMA Channel 22 #define SYSCTL_DC7_DMACH21 0x00200000 // DMA Channel 21 #define SYSCTL_DC7_DMACH20 0x00100000 // DMA Channel 20 #define SYSCTL_DC7_DMACH19 0x00080000 // DMA Channel 19 #define SYSCTL_DC7_DMACH18 0x00040000 // DMA Channel 18 #define SYSCTL_DC7_DMACH17 0x00020000 // DMA Channel 17 #define SYSCTL_DC7_DMACH16 0x00010000 // DMA Channel 16 #define SYSCTL_DC7_DMACH15 0x00008000 // DMA Channel 15 #define SYSCTL_DC7_DMACH14 0x00004000 // DMA Channel 14 #define SYSCTL_DC7_DMACH13 0x00002000 // DMA Channel 13 #define SYSCTL_DC7_DMACH12 0x00001000 // DMA Channel 12 #define SYSCTL_DC7_DMACH11 0x00000800 // DMA Channel 11 #define SYSCTL_DC7_DMACH10 0x00000400 // DMA Channel 10 #define SYSCTL_DC7_DMACH9 0x00000200 // DMA Channel 9 #define SYSCTL_DC7_DMACH8 0x00000100 // DMA Channel 8 #define SYSCTL_DC7_DMACH7 0x00000080 // DMA Channel 7 #define SYSCTL_DC7_DMACH6 0x00000040 // DMA Channel 6 #define SYSCTL_DC7_DMACH5 0x00000020 // DMA Channel 5 #define SYSCTL_DC7_DMACH4 0x00000010 // DMA Channel 4 #define SYSCTL_DC7_DMACH3 0x00000008 // DMA Channel 3 #define SYSCTL_DC7_DMACH2 0x00000004 // DMA Channel 2 #define SYSCTL_DC7_DMACH1 0x00000002 // DMA Channel 1 #define SYSCTL_DC7_DMACH0 0x00000001 // DMA Channel 0 //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_DC8 register. // //***************************************************************************** #define SYSCTL_DC8_ADC1AIN15 0x80000000 // ADC Module 1 AIN15 Pin Present #define SYSCTL_DC8_ADC1AIN14 0x40000000 // ADC Module 1 AIN14 Pin Present #define SYSCTL_DC8_ADC1AIN13 0x20000000 // ADC Module 1 AIN13 Pin Present #define SYSCTL_DC8_ADC1AIN12 0x10000000 // ADC Module 1 AIN12 Pin Present #define SYSCTL_DC8_ADC1AIN11 0x08000000 // ADC Module 1 AIN11 Pin Present #define SYSCTL_DC8_ADC1AIN10 0x04000000 // ADC Module 1 AIN10 Pin Present #define SYSCTL_DC8_ADC1AIN9 0x02000000 // ADC Module 1 AIN9 Pin Present #define SYSCTL_DC8_ADC1AIN8 0x01000000 // ADC Module 1 AIN8 Pin Present #define SYSCTL_DC8_ADC1AIN7 0x00800000 // ADC Module 1 AIN7 Pin Present #define SYSCTL_DC8_ADC1AIN6 0x00400000 // ADC Module 1 AIN6 Pin Present #define SYSCTL_DC8_ADC1AIN5 0x00200000 // ADC Module 1 AIN5 Pin Present #define SYSCTL_DC8_ADC1AIN4 0x00100000 // ADC Module 1 AIN4 Pin Present #define SYSCTL_DC8_ADC1AIN3 0x00080000 // ADC Module 1 AIN3 Pin Present #define SYSCTL_DC8_ADC1AIN2 0x00040000 // ADC Module 1 AIN2 Pin Present #define SYSCTL_DC8_ADC1AIN1 0x00020000 // ADC Module 1 AIN1 Pin Present #define SYSCTL_DC8_ADC1AIN0 0x00010000 // ADC Module 1 AIN0 Pin Present #define SYSCTL_DC8_ADC0AIN15 0x00008000 // ADC Module 0 AIN15 Pin Present #define SYSCTL_DC8_ADC0AIN14 0x00004000 // ADC Module 0 AIN14 Pin Present #define SYSCTL_DC8_ADC0AIN13 0x00002000 // ADC Module 0 AIN13 Pin Present #define SYSCTL_DC8_ADC0AIN12 0x00001000 // ADC Module 0 AIN12 Pin Present #define SYSCTL_DC8_ADC0AIN11 0x00000800 // ADC Module 0 AIN11 Pin Present #define SYSCTL_DC8_ADC0AIN10 0x00000400 // ADC Module 0 AIN10 Pin Present #define SYSCTL_DC8_ADC0AIN9 0x00000200 // ADC Module 0 AIN9 Pin Present #define SYSCTL_DC8_ADC0AIN8 0x00000100 // ADC Module 0 AIN8 Pin Present #define SYSCTL_DC8_ADC0AIN7 0x00000080 // ADC Module 0 AIN7 Pin Present #define SYSCTL_DC8_ADC0AIN6 0x00000040 // ADC Module 0 AIN6 Pin Present #define SYSCTL_DC8_ADC0AIN5 0x00000020 // ADC Module 0 AIN5 Pin Present #define SYSCTL_DC8_ADC0AIN4 0x00000010 // ADC Module 0 AIN4 Pin Present #define SYSCTL_DC8_ADC0AIN3 0x00000008 // ADC Module 0 AIN3 Pin Present #define SYSCTL_DC8_ADC0AIN2 0x00000004 // ADC Module 0 AIN2 Pin Present #define SYSCTL_DC8_ADC0AIN1 0x00000002 // ADC Module 0 AIN1 Pin Present #define SYSCTL_DC8_ADC0AIN0 0x00000001 // ADC Module 0 AIN0 Pin Present //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PBORCTL register. // //***************************************************************************** #define SYSCTL_PBORCTL_BOR0 0x00000004 // VDD under BOR0 Event Action #define SYSCTL_PBORCTL_BOR1 0x00000002 // VDD under BOR1 Event Action //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PTBOCTL register. // //***************************************************************************** #define SYSCTL_PTBOCTL_VDDA_UBOR_M \ 0x00000300 // VDDA under BOR Event Action #define SYSCTL_PTBOCTL_VDDA_UBOR_NONE \ 0x00000000 // No Action #define SYSCTL_PTBOCTL_VDDA_UBOR_SYSINT \ 0x00000100 // System control interrupt #define SYSCTL_PTBOCTL_VDDA_UBOR_NMI \ 0x00000200 // NMI #define SYSCTL_PTBOCTL_VDDA_UBOR_RST \ 0x00000300 // Reset #define SYSCTL_PTBOCTL_VDD_UBOR_M \ 0x00000003 // VDD (VDDS) under BOR Event // Action #define SYSCTL_PTBOCTL_VDD_UBOR_NONE \ 0x00000000 // No Action #define SYSCTL_PTBOCTL_VDD_UBOR_SYSINT \ 0x00000001 // System control interrupt #define SYSCTL_PTBOCTL_VDD_UBOR_NMI \ 0x00000002 // NMI #define SYSCTL_PTBOCTL_VDD_UBOR_RST \ 0x00000003 // Reset //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SRCR0 register. // //***************************************************************************** #define SYSCTL_SRCR0_WDT1 0x10000000 // WDT1 Reset Control #define SYSCTL_SRCR0_CAN1 0x02000000 // CAN1 Reset Control #define SYSCTL_SRCR0_CAN0 0x01000000 // CAN0 Reset Control #define SYSCTL_SRCR0_PWM0 0x00100000 // PWM Reset Control #define SYSCTL_SRCR0_ADC1 0x00020000 // ADC1 Reset Control #define SYSCTL_SRCR0_ADC0 0x00010000 // ADC0 Reset Control #define SYSCTL_SRCR0_HIB 0x00000040 // HIB Reset Control #define SYSCTL_SRCR0_WDT0 0x00000008 // WDT0 Reset Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SRCR1 register. // //***************************************************************************** #define SYSCTL_SRCR1_COMP2 0x04000000 // Analog Comp 2 Reset Control #define SYSCTL_SRCR1_COMP1 0x02000000 // Analog Comp 1 Reset Control #define SYSCTL_SRCR1_COMP0 0x01000000 // Analog Comp 0 Reset Control #define SYSCTL_SRCR1_TIMER3 0x00080000 // Timer 3 Reset Control #define SYSCTL_SRCR1_TIMER2 0x00040000 // Timer 2 Reset Control #define SYSCTL_SRCR1_TIMER1 0x00020000 // Timer 1 Reset Control #define SYSCTL_SRCR1_TIMER0 0x00010000 // Timer 0 Reset Control #define SYSCTL_SRCR1_I2C1 0x00004000 // I2C1 Reset Control #define SYSCTL_SRCR1_I2C0 0x00001000 // I2C0 Reset Control #define SYSCTL_SRCR1_QEI1 0x00000200 // QEI1 Reset Control #define SYSCTL_SRCR1_QEI0 0x00000100 // QEI0 Reset Control #define SYSCTL_SRCR1_SSI1 0x00000020 // SSI1 Reset Control #define SYSCTL_SRCR1_SSI0 0x00000010 // SSI0 Reset Control #define SYSCTL_SRCR1_UART2 0x00000004 // UART2 Reset Control #define SYSCTL_SRCR1_UART1 0x00000002 // UART1 Reset Control #define SYSCTL_SRCR1_UART0 0x00000001 // UART0 Reset Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SRCR2 register. // //***************************************************************************** #define SYSCTL_SRCR2_USB0 0x00010000 // USB0 Reset Control #define SYSCTL_SRCR2_UDMA 0x00002000 // Micro-DMA Reset Control #define SYSCTL_SRCR2_GPIOJ 0x00000100 // Port J Reset Control #define SYSCTL_SRCR2_GPIOH 0x00000080 // Port H Reset Control #define SYSCTL_SRCR2_GPIOG 0x00000040 // Port G Reset Control #define SYSCTL_SRCR2_GPIOF 0x00000020 // Port F Reset Control #define SYSCTL_SRCR2_GPIOE 0x00000010 // Port E Reset Control #define SYSCTL_SRCR2_GPIOD 0x00000008 // Port D Reset Control #define SYSCTL_SRCR2_GPIOC 0x00000004 // Port C Reset Control #define SYSCTL_SRCR2_GPIOB 0x00000002 // Port B Reset Control #define SYSCTL_SRCR2_GPIOA 0x00000001 // Port A Reset Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_RIS register. // //***************************************************************************** #define SYSCTL_RIS_BOR0RIS 0x00000800 // VDD under BOR0 Raw Interrupt // Status #define SYSCTL_RIS_VDDARIS 0x00000400 // VDDA Power OK Event Raw // Interrupt Status #define SYSCTL_RIS_MOSCPUPRIS 0x00000100 // MOSC Power Up Raw Interrupt // Status #define SYSCTL_RIS_USBPLLLRIS 0x00000080 // USB PLL Lock Raw Interrupt // Status #define SYSCTL_RIS_PLLLRIS 0x00000040 // PLL Lock Raw Interrupt Status #define SYSCTL_RIS_MOFRIS 0x00000008 // Main Oscillator Failure Raw // Interrupt Status #define SYSCTL_RIS_BOR1RIS 0x00000002 // VDD under BOR1 Raw Interrupt // Status #define SYSCTL_RIS_BORRIS 0x00000002 // Brown-Out Reset Raw Interrupt // Status //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_IMC register. // //***************************************************************************** #define SYSCTL_IMC_BOR0IM 0x00000800 // VDD under BOR0 Interrupt Mask #define SYSCTL_IMC_VDDAIM 0x00000400 // VDDA Power OK Interrupt Mask #define SYSCTL_IMC_MOSCPUPIM 0x00000100 // MOSC Power Up Interrupt Mask #define SYSCTL_IMC_USBPLLLIM 0x00000080 // USB PLL Lock Interrupt Mask #define SYSCTL_IMC_PLLLIM 0x00000040 // PLL Lock Interrupt Mask #define SYSCTL_IMC_MOFIM 0x00000008 // Main Oscillator Failure // Interrupt Mask #define SYSCTL_IMC_BORIM 0x00000002 // Brown-Out Reset Interrupt Mask #define SYSCTL_IMC_BOR1IM 0x00000002 // VDD under BOR1 Interrupt Mask //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_MISC register. // //***************************************************************************** #define SYSCTL_MISC_BOR0MIS 0x00000800 // VDD under BOR0 Masked Interrupt // Status #define SYSCTL_MISC_VDDAMIS 0x00000400 // VDDA Power OK Masked Interrupt // Status #define SYSCTL_MISC_MOSCPUPMIS 0x00000100 // MOSC Power Up Masked Interrupt // Status #define SYSCTL_MISC_USBPLLLMIS 0x00000080 // USB PLL Lock Masked Interrupt // Status #define SYSCTL_MISC_PLLLMIS 0x00000040 // PLL Lock Masked Interrupt Status #define SYSCTL_MISC_MOFMIS 0x00000008 // Main Oscillator Failure Masked // Interrupt Status #define SYSCTL_MISC_BORMIS 0x00000002 // BOR Masked Interrupt Status #define SYSCTL_MISC_BOR1MIS 0x00000002 // VDD under BOR1 Masked Interrupt // Status //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_RESC register. // //***************************************************************************** #define SYSCTL_RESC_MOSCFAIL 0x00010000 // MOSC Failure Reset #define SYSCTL_RESC_HSSR 0x00001000 // HSSR Reset #define SYSCTL_RESC_WDT1 0x00000020 // Watchdog Timer 1 Reset #define SYSCTL_RESC_SW 0x00000010 // Software Reset #define SYSCTL_RESC_WDT0 0x00000008 // Watchdog Timer 0 Reset #define SYSCTL_RESC_BOR 0x00000004 // Brown-Out Reset #define SYSCTL_RESC_POR 0x00000002 // Power-On Reset #define SYSCTL_RESC_EXT 0x00000001 // External Reset //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PWRTC register. // //***************************************************************************** #define SYSCTL_PWRTC_VDDA_UBOR 0x00000010 // VDDA Under BOR Status #define SYSCTL_PWRTC_VDD_UBOR 0x00000001 // VDD Under BOR Status //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_RCC register. // //***************************************************************************** #define SYSCTL_RCC_ACG 0x08000000 // Auto Clock Gating #define SYSCTL_RCC_SYSDIV_M 0x07800000 // System Clock Divisor #define SYSCTL_RCC_USESYSDIV 0x00400000 // Enable System Clock Divider #define SYSCTL_RCC_USEPWMDIV 0x00100000 // Enable PWM Clock Divisor #define SYSCTL_RCC_PWMDIV_M 0x000E0000 // PWM Unit Clock Divisor #define SYSCTL_RCC_PWMDIV_2 0x00000000 // PWM clock /2 #define SYSCTL_RCC_PWMDIV_4 0x00020000 // PWM clock /4 #define SYSCTL_RCC_PWMDIV_8 0x00040000 // PWM clock /8 #define SYSCTL_RCC_PWMDIV_16 0x00060000 // PWM clock /16 #define SYSCTL_RCC_PWMDIV_32 0x00080000 // PWM clock /32 #define SYSCTL_RCC_PWMDIV_64 0x000A0000 // PWM clock /64 #define SYSCTL_RCC_PWRDN 0x00002000 // PLL Power Down #define SYSCTL_RCC_BYPASS 0x00000800 // PLL Bypass #define SYSCTL_RCC_XTAL_M 0x000007C0 // Crystal Value #define SYSCTL_RCC_XTAL_4MHZ 0x00000180 // 4 MHz #define SYSCTL_RCC_XTAL_4_09MHZ 0x000001C0 // 4.096 MHz #define SYSCTL_RCC_XTAL_4_91MHZ 0x00000200 // 4.9152 MHz #define SYSCTL_RCC_XTAL_5MHZ 0x00000240 // 5 MHz #define SYSCTL_RCC_XTAL_5_12MHZ 0x00000280 // 5.12 MHz #define SYSCTL_RCC_XTAL_6MHZ 0x000002C0 // 6 MHz #define SYSCTL_RCC_XTAL_6_14MHZ 0x00000300 // 6.144 MHz #define SYSCTL_RCC_XTAL_7_37MHZ 0x00000340 // 7.3728 MHz #define SYSCTL_RCC_XTAL_8MHZ 0x00000380 // 8 MHz #define SYSCTL_RCC_XTAL_8_19MHZ 0x000003C0 // 8.192 MHz #define SYSCTL_RCC_XTAL_10MHZ 0x00000400 // 10 MHz #define SYSCTL_RCC_XTAL_12MHZ 0x00000440 // 12 MHz #define SYSCTL_RCC_XTAL_12_2MHZ 0x00000480 // 12.288 MHz #define SYSCTL_RCC_XTAL_13_5MHZ 0x000004C0 // 13.56 MHz #define SYSCTL_RCC_XTAL_14_3MHZ 0x00000500 // 14.31818 MHz #define SYSCTL_RCC_XTAL_16MHZ 0x00000540 // 16 MHz #define SYSCTL_RCC_XTAL_16_3MHZ 0x00000580 // 16.384 MHz #define SYSCTL_RCC_XTAL_18MHZ 0x000005C0 // 18.0 MHz (USB) #define SYSCTL_RCC_XTAL_20MHZ 0x00000600 // 20.0 MHz (USB) #define SYSCTL_RCC_XTAL_24MHZ 0x00000640 // 24.0 MHz (USB) #define SYSCTL_RCC_XTAL_25MHZ 0x00000680 // 25.0 MHz (USB) #define SYSCTL_RCC_OSCSRC_M 0x00000030 // Oscillator Source #define SYSCTL_RCC_OSCSRC_MAIN 0x00000000 // MOSC #define SYSCTL_RCC_OSCSRC_INT 0x00000010 // IOSC #define SYSCTL_RCC_OSCSRC_INT4 0x00000020 // IOSC/4 #define SYSCTL_RCC_OSCSRC_30 0x00000030 // LFIOSC #define SYSCTL_RCC_MOSCDIS 0x00000001 // Main Oscillator Disable #define SYSCTL_RCC_SYSDIV_S 23 #define SYSCTL_RCC_XTAL_S 6 // Shift to the XTAL field //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_NMIC register. // //***************************************************************************** #define SYSCTL_NMIC_MOSCFAIL 0x00010000 // MOSC Failure NMI #define SYSCTL_NMIC_TAMPER 0x00000200 // Tamper Event NMI #define SYSCTL_NMIC_WDT1 0x00000020 // Watch Dog Timer (WDT) 1 NMI #define SYSCTL_NMIC_WDT0 0x00000008 // Watch Dog Timer (WDT) 0 NMI #define SYSCTL_NMIC_POWER 0x00000004 // Power/Brown Out Event NMI #define SYSCTL_NMIC_EXTERNAL 0x00000001 // External Pin NMI //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_GPIOHBCTL // register. // //***************************************************************************** #define SYSCTL_GPIOHBCTL_PORTJ 0x00000100 // Port J Advanced High-Performance // Bus #define SYSCTL_GPIOHBCTL_PORTH 0x00000080 // Port H Advanced High-Performance // Bus #define SYSCTL_GPIOHBCTL_PORTG 0x00000040 // Port G Advanced High-Performance // Bus #define SYSCTL_GPIOHBCTL_PORTF 0x00000020 // Port F Advanced High-Performance // Bus #define SYSCTL_GPIOHBCTL_PORTE 0x00000010 // Port E Advanced High-Performance // Bus #define SYSCTL_GPIOHBCTL_PORTD 0x00000008 // Port D Advanced High-Performance // Bus #define SYSCTL_GPIOHBCTL_PORTC 0x00000004 // Port C Advanced High-Performance // Bus #define SYSCTL_GPIOHBCTL_PORTB 0x00000002 // Port B Advanced High-Performance // Bus #define SYSCTL_GPIOHBCTL_PORTA 0x00000001 // Port A Advanced High-Performance // Bus //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_RCC2 register. // //***************************************************************************** #define SYSCTL_RCC2_USERCC2 0x80000000 // Use RCC2 #define SYSCTL_RCC2_DIV400 0x40000000 // Divide PLL as 400 MHz vs. 200 // MHz #define SYSCTL_RCC2_SYSDIV2_M 0x1F800000 // System Clock Divisor 2 #define SYSCTL_RCC2_SYSDIV2LSB 0x00400000 // Additional LSB for SYSDIV2 #define SYSCTL_RCC2_USBPWRDN 0x00004000 // Power-Down USB PLL #define SYSCTL_RCC2_PWRDN2 0x00002000 // Power-Down PLL 2 #define SYSCTL_RCC2_BYPASS2 0x00000800 // PLL Bypass 2 #define SYSCTL_RCC2_OSCSRC2_M 0x00000070 // Oscillator Source 2 #define SYSCTL_RCC2_OSCSRC2_MO 0x00000000 // MOSC #define SYSCTL_RCC2_OSCSRC2_IO 0x00000010 // PIOSC #define SYSCTL_RCC2_OSCSRC2_IO4 0x00000020 // PIOSC/4 #define SYSCTL_RCC2_OSCSRC2_30 0x00000030 // LFIOSC #define SYSCTL_RCC2_OSCSRC2_32 0x00000070 // 32.768 kHz #define SYSCTL_RCC2_SYSDIV2_S 23 //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_MOSCCTL register. // //***************************************************************************** #define SYSCTL_MOSCCTL_OSCRNG 0x00000010 // Oscillator Range #define SYSCTL_MOSCCTL_PWRDN 0x00000008 // Power Down #define SYSCTL_MOSCCTL_NOXTAL 0x00000004 // No Crystal Connected #define SYSCTL_MOSCCTL_MOSCIM 0x00000002 // MOSC Failure Action #define SYSCTL_MOSCCTL_CVAL 0x00000001 // Clock Validation for MOSC //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_RSCLKCFG // register. // //***************************************************************************** #define SYSCTL_RSCLKCFG_MEMTIMU 0x80000000 // Memory Timing Register Update #define SYSCTL_RSCLKCFG_NEWFREQ 0x40000000 // New PLLFREQ Accept #define SYSCTL_RSCLKCFG_ACG 0x20000000 // Auto Clock Gating #define SYSCTL_RSCLKCFG_USEPLL 0x10000000 // Use PLL #define SYSCTL_RSCLKCFG_PLLSRC_M \ 0x0F000000 // PLL Source #define SYSCTL_RSCLKCFG_PLLSRC_PIOSC \ 0x00000000 // PIOSC is PLL input clock source #define SYSCTL_RSCLKCFG_PLLSRC_MOSC \ 0x03000000 // MOSC is the PLL input clock // source #define SYSCTL_RSCLKCFG_OSCSRC_M \ 0x00F00000 // Oscillator Source #define SYSCTL_RSCLKCFG_OSCSRC_PIOSC \ 0x00000000 // PIOSC is oscillator source #define SYSCTL_RSCLKCFG_OSCSRC_LFIOSC \ 0x00200000 // LFIOSC is oscillator source #define SYSCTL_RSCLKCFG_OSCSRC_MOSC \ 0x00300000 // MOSC is oscillator source #define SYSCTL_RSCLKCFG_OSCSRC_RTC \ 0x00400000 // Hibernation Module RTC // Oscillator (RTCOSC) #define SYSCTL_RSCLKCFG_OSYSDIV_M \ 0x000FFC00 // Oscillator System Clock Divisor #define SYSCTL_RSCLKCFG_PSYSDIV_M \ 0x000003FF // PLL System Clock Divisor #define SYSCTL_RSCLKCFG_OSYSDIV_S \ 10 #define SYSCTL_RSCLKCFG_PSYSDIV_S \ 0 //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_MEMTIM0 register. // //***************************************************************************** #define SYSCTL_MEMTIM0_EBCHT_M 0x03C00000 // EEPROM Clock High Time #define SYSCTL_MEMTIM0_EBCHT_0_5 \ 0x00000000 // 1/2 system clock period #define SYSCTL_MEMTIM0_EBCHT_1 0x00400000 // 1 system clock period #define SYSCTL_MEMTIM0_EBCHT_1_5 \ 0x00800000 // 1.5 system clock periods #define SYSCTL_MEMTIM0_EBCHT_2 0x00C00000 // 2 system clock periods #define SYSCTL_MEMTIM0_EBCHT_2_5 \ 0x01000000 // 2.5 system clock periods #define SYSCTL_MEMTIM0_EBCHT_3 0x01400000 // 3 system clock periods #define SYSCTL_MEMTIM0_EBCHT_3_5 \ 0x01800000 // 3.5 system clock periods #define SYSCTL_MEMTIM0_EBCHT_4 0x01C00000 // 4 system clock periods #define SYSCTL_MEMTIM0_EBCHT_4_5 \ 0x02000000 // 4.5 system clock periods #define SYSCTL_MEMTIM0_EBCE 0x00200000 // EEPROM Bank Clock Edge #define SYSCTL_MEMTIM0_MB1 0x00100010 // Must be one #define SYSCTL_MEMTIM0_EWS_M 0x000F0000 // EEPROM Wait States #define SYSCTL_MEMTIM0_FBCHT_M 0x000003C0 // Flash Bank Clock High Time #define SYSCTL_MEMTIM0_FBCHT_0_5 \ 0x00000000 // 1/2 system clock period #define SYSCTL_MEMTIM0_FBCHT_1 0x00000040 // 1 system clock period #define SYSCTL_MEMTIM0_FBCHT_1_5 \ 0x00000080 // 1.5 system clock periods #define SYSCTL_MEMTIM0_FBCHT_2 0x000000C0 // 2 system clock periods #define SYSCTL_MEMTIM0_FBCHT_2_5 \ 0x00000100 // 2.5 system clock periods #define SYSCTL_MEMTIM0_FBCHT_3 0x00000140 // 3 system clock periods #define SYSCTL_MEMTIM0_FBCHT_3_5 \ 0x00000180 // 3.5 system clock periods #define SYSCTL_MEMTIM0_FBCHT_4 0x000001C0 // 4 system clock periods #define SYSCTL_MEMTIM0_FBCHT_4_5 \ 0x00000200 // 4.5 system clock periods #define SYSCTL_MEMTIM0_FBCE 0x00000020 // Flash Bank Clock Edge #define SYSCTL_MEMTIM0_FWS_M 0x0000000F // Flash Wait State #define SYSCTL_MEMTIM0_EWS_S 16 #define SYSCTL_MEMTIM0_FWS_S 0 //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_RCGC0 register. // //***************************************************************************** #define SYSCTL_RCGC0_WDT1 0x10000000 // WDT1 Clock Gating Control #define SYSCTL_RCGC0_CAN1 0x02000000 // CAN1 Clock Gating Control #define SYSCTL_RCGC0_CAN0 0x01000000 // CAN0 Clock Gating Control #define SYSCTL_RCGC0_PWM0 0x00100000 // PWM Clock Gating Control #define SYSCTL_RCGC0_ADC1 0x00020000 // ADC1 Clock Gating Control #define SYSCTL_RCGC0_ADC0 0x00010000 // ADC0 Clock Gating Control #define SYSCTL_RCGC0_ADC1SPD_M 0x00000C00 // ADC1 Sample Speed #define SYSCTL_RCGC0_ADC1SPD_125K \ 0x00000000 // 125K samples/second #define SYSCTL_RCGC0_ADC1SPD_250K \ 0x00000400 // 250K samples/second #define SYSCTL_RCGC0_ADC1SPD_500K \ 0x00000800 // 500K samples/second #define SYSCTL_RCGC0_ADC1SPD_1M 0x00000C00 // 1M samples/second #define SYSCTL_RCGC0_ADC0SPD_M 0x00000300 // ADC0 Sample Speed #define SYSCTL_RCGC0_ADC0SPD_125K \ 0x00000000 // 125K samples/second #define SYSCTL_RCGC0_ADC0SPD_250K \ 0x00000100 // 250K samples/second #define SYSCTL_RCGC0_ADC0SPD_500K \ 0x00000200 // 500K samples/second #define SYSCTL_RCGC0_ADC0SPD_1M 0x00000300 // 1M samples/second #define SYSCTL_RCGC0_HIB 0x00000040 // HIB Clock Gating Control #define SYSCTL_RCGC0_WDT0 0x00000008 // WDT0 Clock Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_RCGC1 register. // //***************************************************************************** #define SYSCTL_RCGC1_COMP2 0x04000000 // Analog Comparator 2 Clock Gating #define SYSCTL_RCGC1_COMP1 0x02000000 // Analog Comparator 1 Clock Gating #define SYSCTL_RCGC1_COMP0 0x01000000 // Analog Comparator 0 Clock Gating #define SYSCTL_RCGC1_TIMER3 0x00080000 // Timer 3 Clock Gating Control #define SYSCTL_RCGC1_TIMER2 0x00040000 // Timer 2 Clock Gating Control #define SYSCTL_RCGC1_TIMER1 0x00020000 // Timer 1 Clock Gating Control #define SYSCTL_RCGC1_TIMER0 0x00010000 // Timer 0 Clock Gating Control #define SYSCTL_RCGC1_I2C1 0x00004000 // I2C1 Clock Gating Control #define SYSCTL_RCGC1_I2C0 0x00001000 // I2C0 Clock Gating Control #define SYSCTL_RCGC1_QEI1 0x00000200 // QEI1 Clock Gating Control #define SYSCTL_RCGC1_QEI0 0x00000100 // QEI0 Clock Gating Control #define SYSCTL_RCGC1_SSI1 0x00000020 // SSI1 Clock Gating Control #define SYSCTL_RCGC1_SSI0 0x00000010 // SSI0 Clock Gating Control #define SYSCTL_RCGC1_UART2 0x00000004 // UART2 Clock Gating Control #define SYSCTL_RCGC1_UART1 0x00000002 // UART1 Clock Gating Control #define SYSCTL_RCGC1_UART0 0x00000001 // UART0 Clock Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_RCGC2 register. // //***************************************************************************** #define SYSCTL_RCGC2_USB0 0x00010000 // USB0 Clock Gating Control #define SYSCTL_RCGC2_UDMA 0x00002000 // Micro-DMA Clock Gating Control #define SYSCTL_RCGC2_GPIOJ 0x00000100 // Port J Clock Gating Control #define SYSCTL_RCGC2_GPIOH 0x00000080 // Port H Clock Gating Control #define SYSCTL_RCGC2_GPIOG 0x00000040 // Port G Clock Gating Control #define SYSCTL_RCGC2_GPIOF 0x00000020 // Port F Clock Gating Control #define SYSCTL_RCGC2_GPIOE 0x00000010 // Port E Clock Gating Control #define SYSCTL_RCGC2_GPIOD 0x00000008 // Port D Clock Gating Control #define SYSCTL_RCGC2_GPIOC 0x00000004 // Port C Clock Gating Control #define SYSCTL_RCGC2_GPIOB 0x00000002 // Port B Clock Gating Control #define SYSCTL_RCGC2_GPIOA 0x00000001 // Port A Clock Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SCGC0 register. // //***************************************************************************** #define SYSCTL_SCGC0_WDT1 0x10000000 // WDT1 Clock Gating Control #define SYSCTL_SCGC0_CAN1 0x02000000 // CAN1 Clock Gating Control #define SYSCTL_SCGC0_CAN0 0x01000000 // CAN0 Clock Gating Control #define SYSCTL_SCGC0_PWM0 0x00100000 // PWM Clock Gating Control #define SYSCTL_SCGC0_ADC1 0x00020000 // ADC1 Clock Gating Control #define SYSCTL_SCGC0_ADC0 0x00010000 // ADC0 Clock Gating Control #define SYSCTL_SCGC0_ADCSPD_M 0x00000F00 // ADC Sample Speed #define SYSCTL_SCGC0_HIB 0x00000040 // HIB Clock Gating Control #define SYSCTL_SCGC0_WDT0 0x00000008 // WDT0 Clock Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SCGC1 register. // //***************************************************************************** #define SYSCTL_SCGC1_COMP2 0x04000000 // Analog Comparator 2 Clock Gating #define SYSCTL_SCGC1_COMP1 0x02000000 // Analog Comparator 1 Clock Gating #define SYSCTL_SCGC1_COMP0 0x01000000 // Analog Comparator 0 Clock Gating #define SYSCTL_SCGC1_TIMER3 0x00080000 // Timer 3 Clock Gating Control #define SYSCTL_SCGC1_TIMER2 0x00040000 // Timer 2 Clock Gating Control #define SYSCTL_SCGC1_TIMER1 0x00020000 // Timer 1 Clock Gating Control #define SYSCTL_SCGC1_TIMER0 0x00010000 // Timer 0 Clock Gating Control #define SYSCTL_SCGC1_I2C1 0x00004000 // I2C1 Clock Gating Control #define SYSCTL_SCGC1_I2C0 0x00001000 // I2C0 Clock Gating Control #define SYSCTL_SCGC1_QEI1 0x00000200 // QEI1 Clock Gating Control #define SYSCTL_SCGC1_QEI0 0x00000100 // QEI0 Clock Gating Control #define SYSCTL_SCGC1_SSI1 0x00000020 // SSI1 Clock Gating Control #define SYSCTL_SCGC1_SSI0 0x00000010 // SSI0 Clock Gating Control #define SYSCTL_SCGC1_UART2 0x00000004 // UART2 Clock Gating Control #define SYSCTL_SCGC1_UART1 0x00000002 // UART1 Clock Gating Control #define SYSCTL_SCGC1_UART0 0x00000001 // UART0 Clock Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SCGC2 register. // //***************************************************************************** #define SYSCTL_SCGC2_USB0 0x00010000 // USB0 Clock Gating Control #define SYSCTL_SCGC2_UDMA 0x00002000 // Micro-DMA Clock Gating Control #define SYSCTL_SCGC2_GPIOJ 0x00000100 // Port J Clock Gating Control #define SYSCTL_SCGC2_GPIOH 0x00000080 // Port H Clock Gating Control #define SYSCTL_SCGC2_GPIOG 0x00000040 // Port G Clock Gating Control #define SYSCTL_SCGC2_GPIOF 0x00000020 // Port F Clock Gating Control #define SYSCTL_SCGC2_GPIOE 0x00000010 // Port E Clock Gating Control #define SYSCTL_SCGC2_GPIOD 0x00000008 // Port D Clock Gating Control #define SYSCTL_SCGC2_GPIOC 0x00000004 // Port C Clock Gating Control #define SYSCTL_SCGC2_GPIOB 0x00000002 // Port B Clock Gating Control #define SYSCTL_SCGC2_GPIOA 0x00000001 // Port A Clock Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_DCGC0 register. // //***************************************************************************** #define SYSCTL_DCGC0_WDT1 0x10000000 // WDT1 Clock Gating Control #define SYSCTL_DCGC0_CAN1 0x02000000 // CAN1 Clock Gating Control #define SYSCTL_DCGC0_CAN0 0x01000000 // CAN0 Clock Gating Control #define SYSCTL_DCGC0_PWM0 0x00100000 // PWM Clock Gating Control #define SYSCTL_DCGC0_ADC1 0x00020000 // ADC1 Clock Gating Control #define SYSCTL_DCGC0_ADC0 0x00010000 // ADC0 Clock Gating Control #define SYSCTL_DCGC0_HIB 0x00000040 // HIB Clock Gating Control #define SYSCTL_DCGC0_WDT0 0x00000008 // WDT0 Clock Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_DCGC1 register. // //***************************************************************************** #define SYSCTL_DCGC1_COMP2 0x04000000 // Analog Comparator 2 Clock Gating #define SYSCTL_DCGC1_COMP1 0x02000000 // Analog Comparator 1 Clock Gating #define SYSCTL_DCGC1_COMP0 0x01000000 // Analog Comparator 0 Clock Gating #define SYSCTL_DCGC1_TIMER3 0x00080000 // Timer 3 Clock Gating Control #define SYSCTL_DCGC1_TIMER2 0x00040000 // Timer 2 Clock Gating Control #define SYSCTL_DCGC1_TIMER1 0x00020000 // Timer 1 Clock Gating Control #define SYSCTL_DCGC1_TIMER0 0x00010000 // Timer 0 Clock Gating Control #define SYSCTL_DCGC1_I2C1 0x00004000 // I2C1 Clock Gating Control #define SYSCTL_DCGC1_I2C0 0x00001000 // I2C0 Clock Gating Control #define SYSCTL_DCGC1_QEI1 0x00000200 // QEI1 Clock Gating Control #define SYSCTL_DCGC1_QEI0 0x00000100 // QEI0 Clock Gating Control #define SYSCTL_DCGC1_SSI1 0x00000020 // SSI1 Clock Gating Control #define SYSCTL_DCGC1_SSI0 0x00000010 // SSI0 Clock Gating Control #define SYSCTL_DCGC1_UART2 0x00000004 // UART2 Clock Gating Control #define SYSCTL_DCGC1_UART1 0x00000002 // UART1 Clock Gating Control #define SYSCTL_DCGC1_UART0 0x00000001 // UART0 Clock Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_DCGC2 register. // //***************************************************************************** #define SYSCTL_DCGC2_USB0 0x00010000 // USB0 Clock Gating Control #define SYSCTL_DCGC2_UDMA 0x00002000 // Micro-DMA Clock Gating Control #define SYSCTL_DCGC2_GPIOJ 0x00000100 // Port J Clock Gating Control #define SYSCTL_DCGC2_GPIOH 0x00000080 // Port H Clock Gating Control #define SYSCTL_DCGC2_GPIOG 0x00000040 // Port G Clock Gating Control #define SYSCTL_DCGC2_GPIOF 0x00000020 // Port F Clock Gating Control #define SYSCTL_DCGC2_GPIOE 0x00000010 // Port E Clock Gating Control #define SYSCTL_DCGC2_GPIOD 0x00000008 // Port D Clock Gating Control #define SYSCTL_DCGC2_GPIOC 0x00000004 // Port C Clock Gating Control #define SYSCTL_DCGC2_GPIOB 0x00000002 // Port B Clock Gating Control #define SYSCTL_DCGC2_GPIOA 0x00000001 // Port A Clock Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_ALTCLKCFG // register. // //***************************************************************************** #define SYSCTL_ALTCLKCFG_ALTCLK_M \ 0x0000000F // Alternate Clock Source #define SYSCTL_ALTCLKCFG_ALTCLK_PIOSC \ 0x00000000 // PIOSC #define SYSCTL_ALTCLKCFG_ALTCLK_RTCOSC \ 0x00000003 // Hibernation Module Real-time // clock output (RTCOSC) #define SYSCTL_ALTCLKCFG_ALTCLK_LFIOSC \ 0x00000004 // Low-frequency internal // oscillator (LFIOSC) //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_DSLPCLKCFG // register. // //***************************************************************************** #define SYSCTL_DSLPCLKCFG_D_M 0x1F800000 // Divider Field Override #define SYSCTL_DSLPCLKCFG_O_M 0x00000070 // Clock Source #define SYSCTL_DSLPCLKCFG_O_IGN 0x00000000 // MOSC #define SYSCTL_DSLPCLKCFG_O_IO 0x00000010 // PIOSC #define SYSCTL_DSLPCLKCFG_O_30 0x00000030 // LFIOSC #define SYSCTL_DSLPCLKCFG_O_32 0x00000070 // 32.768 kHz #define SYSCTL_DSLPCLKCFG_PIOSCPD \ 0x00000002 // PIOSC Power Down Request #define SYSCTL_DSLPCLKCFG_D_S 23 //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_DSCLKCFG // register. // //***************************************************************************** #define SYSCTL_DSCLKCFG_PIOSCPD 0x80000000 // PIOSC Power Down #define SYSCTL_DSCLKCFG_MOSCDPD 0x40000000 // MOSC Disable Power Down #define SYSCTL_DSCLKCFG_DSOSCSRC_M \ 0x00F00000 // Deep Sleep Oscillator Source #define SYSCTL_DSCLKCFG_DSOSCSRC_PIOSC \ 0x00000000 // PIOSC #define SYSCTL_DSCLKCFG_DSOSCSRC_LFIOSC \ 0x00200000 // LFIOSC #define SYSCTL_DSCLKCFG_DSOSCSRC_MOSC \ 0x00300000 // MOSC #define SYSCTL_DSCLKCFG_DSOSCSRC_RTC \ 0x00400000 // Hibernation Module RTCOSC #define SYSCTL_DSCLKCFG_DSSYSDIV_M \ 0x000003FF // Deep Sleep Clock Divisor #define SYSCTL_DSCLKCFG_DSSYSDIV_S \ 0 //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_DIVSCLK register. // //***************************************************************************** #define SYSCTL_DIVSCLK_EN 0x80000000 // DIVSCLK Enable #define SYSCTL_DIVSCLK_SRC_M 0x00030000 // Clock Source #define SYSCTL_DIVSCLK_SRC_SYSCLK \ 0x00000000 // System Clock #define SYSCTL_DIVSCLK_SRC_PIOSC \ 0x00010000 // PIOSC #define SYSCTL_DIVSCLK_SRC_MOSC 0x00020000 // MOSC #define SYSCTL_DIVSCLK_DIV_M 0x000000FF // Divisor Value #define SYSCTL_DIVSCLK_DIV_S 0 //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SYSPROP register. // //***************************************************************************** #define SYSCTL_SYSPROP_FPU 0x00000001 // FPU Present //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PIOSCCAL // register. // //***************************************************************************** #define SYSCTL_PIOSCCAL_UTEN 0x80000000 // Use User Trim Value #define SYSCTL_PIOSCCAL_CAL 0x00000200 // Start Calibration #define SYSCTL_PIOSCCAL_UPDATE 0x00000100 // Update Trim #define SYSCTL_PIOSCCAL_UT_M 0x0000007F // User Trim Value #define SYSCTL_PIOSCCAL_UT_S 0 //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PIOSCSTAT // register. // //***************************************************************************** #define SYSCTL_PIOSCSTAT_DT_M 0x007F0000 // Default Trim Value #define SYSCTL_PIOSCSTAT_CR_M 0x00000300 // Calibration Result #define SYSCTL_PIOSCSTAT_CRNONE 0x00000000 // Calibration has not been // attempted #define SYSCTL_PIOSCSTAT_CRPASS 0x00000100 // The last calibration operation // completed to meet 1% accuracy #define SYSCTL_PIOSCSTAT_CRFAIL 0x00000200 // The last calibration operation // failed to meet 1% accuracy #define SYSCTL_PIOSCSTAT_CT_M 0x0000007F // Calibration Trim Value #define SYSCTL_PIOSCSTAT_DT_S 16 #define SYSCTL_PIOSCSTAT_CT_S 0 //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PLLFREQ0 // register. // //***************************************************************************** #define SYSCTL_PLLFREQ0_PLLPWR 0x00800000 // PLL Power #define SYSCTL_PLLFREQ0_MFRAC_M 0x000FFC00 // PLL M Fractional Value #define SYSCTL_PLLFREQ0_MINT_M 0x000003FF // PLL M Integer Value #define SYSCTL_PLLFREQ0_MFRAC_S 10 #define SYSCTL_PLLFREQ0_MINT_S 0 //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PLLFREQ1 // register. // //***************************************************************************** #define SYSCTL_PLLFREQ1_Q_M 0x00001F00 // PLL Q Value #define SYSCTL_PLLFREQ1_N_M 0x0000001F // PLL N Value #define SYSCTL_PLLFREQ1_Q_S 8 #define SYSCTL_PLLFREQ1_N_S 0 //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PLLSTAT register. // //***************************************************************************** #define SYSCTL_PLLSTAT_LOCK 0x00000001 // PLL Lock //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SLPPWRCFG // register. // //***************************************************************************** #define SYSCTL_SLPPWRCFG_FLASHPM_M \ 0x00000030 // Flash Power Modes #define SYSCTL_SLPPWRCFG_FLASHPM_NRM \ 0x00000000 // Active Mode #define SYSCTL_SLPPWRCFG_FLASHPM_SLP \ 0x00000020 // Low Power Mode #define SYSCTL_SLPPWRCFG_SRAMPM_M \ 0x00000003 // SRAM Power Modes #define SYSCTL_SLPPWRCFG_SRAMPM_NRM \ 0x00000000 // Active Mode #define SYSCTL_SLPPWRCFG_SRAMPM_SBY \ 0x00000001 // Standby Mode #define SYSCTL_SLPPWRCFG_SRAMPM_LP \ 0x00000003 // Low Power Mode //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_DSLPPWRCFG // register. // //***************************************************************************** #define SYSCTL_DSLPPWRCFG_LDOSM 0x00000200 // LDO Sleep Mode #define SYSCTL_DSLPPWRCFG_TSPD 0x00000100 // Temperature Sense Power Down #define SYSCTL_DSLPPWRCFG_FLASHPM_M \ 0x00000030 // Flash Power Modes #define SYSCTL_DSLPPWRCFG_FLASHPM_NRM \ 0x00000000 // Active Mode #define SYSCTL_DSLPPWRCFG_FLASHPM_SLP \ 0x00000020 // Low Power Mode #define SYSCTL_DSLPPWRCFG_SRAMPM_M \ 0x00000003 // SRAM Power Modes #define SYSCTL_DSLPPWRCFG_SRAMPM_NRM \ 0x00000000 // Active Mode #define SYSCTL_DSLPPWRCFG_SRAMPM_SBY \ 0x00000001 // Standby Mode #define SYSCTL_DSLPPWRCFG_SRAMPM_LP \ 0x00000003 // Low Power Mode //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_DC9 register. // //***************************************************************************** #define SYSCTL_DC9_ADC1DC7 0x00800000 // ADC1 DC7 Present #define SYSCTL_DC9_ADC1DC6 0x00400000 // ADC1 DC6 Present #define SYSCTL_DC9_ADC1DC5 0x00200000 // ADC1 DC5 Present #define SYSCTL_DC9_ADC1DC4 0x00100000 // ADC1 DC4 Present #define SYSCTL_DC9_ADC1DC3 0x00080000 // ADC1 DC3 Present #define SYSCTL_DC9_ADC1DC2 0x00040000 // ADC1 DC2 Present #define SYSCTL_DC9_ADC1DC1 0x00020000 // ADC1 DC1 Present #define SYSCTL_DC9_ADC1DC0 0x00010000 // ADC1 DC0 Present #define SYSCTL_DC9_ADC0DC7 0x00000080 // ADC0 DC7 Present #define SYSCTL_DC9_ADC0DC6 0x00000040 // ADC0 DC6 Present #define SYSCTL_DC9_ADC0DC5 0x00000020 // ADC0 DC5 Present #define SYSCTL_DC9_ADC0DC4 0x00000010 // ADC0 DC4 Present #define SYSCTL_DC9_ADC0DC3 0x00000008 // ADC0 DC3 Present #define SYSCTL_DC9_ADC0DC2 0x00000004 // ADC0 DC2 Present #define SYSCTL_DC9_ADC0DC1 0x00000002 // ADC0 DC1 Present #define SYSCTL_DC9_ADC0DC0 0x00000001 // ADC0 DC0 Present //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_NVMSTAT register. // //***************************************************************************** #define SYSCTL_NVMSTAT_FWB 0x00000001 // 32 Word Flash Write Buffer // Available //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_LDOSPCTL // register. // //***************************************************************************** #define SYSCTL_LDOSPCTL_VADJEN 0x80000000 // Voltage Adjust Enable #define SYSCTL_LDOSPCTL_VLDO_M 0x000000FF // LDO Output Voltage #define SYSCTL_LDOSPCTL_VLDO_0_90V \ 0x00000012 // 0.90 V #define SYSCTL_LDOSPCTL_VLDO_0_95V \ 0x00000013 // 0.95 V #define SYSCTL_LDOSPCTL_VLDO_1_00V \ 0x00000014 // 1.00 V #define SYSCTL_LDOSPCTL_VLDO_1_05V \ 0x00000015 // 1.05 V #define SYSCTL_LDOSPCTL_VLDO_1_10V \ 0x00000016 // 1.10 V #define SYSCTL_LDOSPCTL_VLDO_1_15V \ 0x00000017 // 1.15 V #define SYSCTL_LDOSPCTL_VLDO_1_20V \ 0x00000018 // 1.20 V //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_LDODPCTL // register. // //***************************************************************************** #define SYSCTL_LDODPCTL_VADJEN 0x80000000 // Voltage Adjust Enable #define SYSCTL_LDODPCTL_VLDO_M 0x000000FF // LDO Output Voltage #define SYSCTL_LDODPCTL_VLDO_0_90V \ 0x00000012 // 0.90 V #define SYSCTL_LDODPCTL_VLDO_0_95V \ 0x00000013 // 0.95 V #define SYSCTL_LDODPCTL_VLDO_1_00V \ 0x00000014 // 1.00 V #define SYSCTL_LDODPCTL_VLDO_1_05V \ 0x00000015 // 1.05 V #define SYSCTL_LDODPCTL_VLDO_1_10V \ 0x00000016 // 1.10 V #define SYSCTL_LDODPCTL_VLDO_1_15V \ 0x00000017 // 1.15 V #define SYSCTL_LDODPCTL_VLDO_1_20V \ 0x00000018 // 1.20 V #define SYSCTL_LDODPCTL_VLDO_1_25V \ 0x00000019 // 1.25 V #define SYSCTL_LDODPCTL_VLDO_1_30V \ 0x0000001A // 1.30 V #define SYSCTL_LDODPCTL_VLDO_1_35V \ 0x0000001B // 1.35 V //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_RESBEHAVCTL // register. // //***************************************************************************** #define SYSCTL_RESBEHAVCTL_WDOG1_M \ 0x000000C0 // Watchdog 1 Reset Operation #define SYSCTL_RESBEHAVCTL_WDOG1_SYSRST \ 0x00000080 // Watchdog 1 issues a system // reset. The application starts // within 10 us #define SYSCTL_RESBEHAVCTL_WDOG1_POR \ 0x000000C0 // Watchdog 1 issues a simulated // POR sequence. Application starts // less than 500 us after // deassertion (Default) #define SYSCTL_RESBEHAVCTL_WDOG0_M \ 0x00000030 // Watchdog 0 Reset Operation #define SYSCTL_RESBEHAVCTL_WDOG0_SYSRST \ 0x00000020 // Watchdog 0 issues a system // reset. The application starts // within 10 us #define SYSCTL_RESBEHAVCTL_WDOG0_POR \ 0x00000030 // Watchdog 0 issues a simulated // POR sequence. Application starts // less than 500 us after // deassertion (Default) #define SYSCTL_RESBEHAVCTL_BOR_M \ 0x0000000C // BOR Reset operation #define SYSCTL_RESBEHAVCTL_BOR_SYSRST \ 0x00000008 // Brown Out Reset issues system // reset. The application starts // within 10 us #define SYSCTL_RESBEHAVCTL_BOR_POR \ 0x0000000C // Brown Out Reset issues a // simulated POR sequence. The // application starts less than 500 // us after deassertion (Default) #define SYSCTL_RESBEHAVCTL_EXTRES_M \ 0x00000003 // External RST Pin Operation #define SYSCTL_RESBEHAVCTL_EXTRES_SYSRST \ 0x00000002 // External RST assertion issues a // system reset. The application // starts within 10 us #define SYSCTL_RESBEHAVCTL_EXTRES_POR \ 0x00000003 // External RST assertion issues a // simulated POR sequence. // Application starts less than 500 // us after deassertion (Default) //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_HSSR register. // //***************************************************************************** #define SYSCTL_HSSR_KEY_M 0xFF000000 // Write Key #define SYSCTL_HSSR_CDOFF_M 0x00FFFFFF // Command Descriptor Pointer #define SYSCTL_HSSR_KEY_S 24 #define SYSCTL_HSSR_CDOFF_S 0 //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_USBPDS register. // //***************************************************************************** #define SYSCTL_USBPDS_MEMSTAT_M 0x0000000C // Memory Array Power Status #define SYSCTL_USBPDS_MEMSTAT_OFF \ 0x00000000 // Array OFF #define SYSCTL_USBPDS_MEMSTAT_RETAIN \ 0x00000004 // SRAM Retention #define SYSCTL_USBPDS_MEMSTAT_ON \ 0x0000000C // Array On #define SYSCTL_USBPDS_PWRSTAT_M 0x00000003 // Power Domain Status #define SYSCTL_USBPDS_PWRSTAT_OFF \ 0x00000000 // OFF #define SYSCTL_USBPDS_PWRSTAT_ON \ 0x00000003 // ON //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_USBMPC register. // //***************************************************************************** #define SYSCTL_USBMPC_PWRCTL_M 0x00000003 // Memory Array Power Control #define SYSCTL_USBMPC_PWRCTL_OFF \ 0x00000000 // Array OFF #define SYSCTL_USBMPC_PWRCTL_RETAIN \ 0x00000001 // SRAM Retention #define SYSCTL_USBMPC_PWRCTL_ON 0x00000003 // Array On //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_EMACPDS register. // //***************************************************************************** #define SYSCTL_EMACPDS_MEMSTAT_M \ 0x0000000C // Memory Array Power Status #define SYSCTL_EMACPDS_MEMSTAT_OFF \ 0x00000000 // Array OFF #define SYSCTL_EMACPDS_MEMSTAT_ON \ 0x0000000C // Array On #define SYSCTL_EMACPDS_PWRSTAT_M \ 0x00000003 // Power Domain Status #define SYSCTL_EMACPDS_PWRSTAT_OFF \ 0x00000000 // OFF #define SYSCTL_EMACPDS_PWRSTAT_ON \ 0x00000003 // ON //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_EMACMPC register. // //***************************************************************************** #define SYSCTL_EMACMPC_PWRCTL_M 0x00000003 // Memory Array Power Control #define SYSCTL_EMACMPC_PWRCTL_OFF \ 0x00000000 // Array OFF #define SYSCTL_EMACMPC_PWRCTL_ON \ 0x00000003 // Array On //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_LCDMPC register. // //***************************************************************************** #define SYSCTL_LCDMPC_PWRCTL_M 0x00000003 // Memory Array Power Control #define SYSCTL_LCDMPC_PWRCTL_OFF \ 0x00000000 // Array OFF #define SYSCTL_LCDMPC_PWRCTL_ON 0x00000003 // Array On //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PPWD register. // //***************************************************************************** #define SYSCTL_PPWD_P1 0x00000002 // Watchdog Timer 1 Present #define SYSCTL_PPWD_P0 0x00000001 // Watchdog Timer 0 Present //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PPTIMER register. // //***************************************************************************** #define SYSCTL_PPTIMER_P7 0x00000080 // 16/32-Bit General-Purpose Timer // 7 Present #define SYSCTL_PPTIMER_P6 0x00000040 // 16/32-Bit General-Purpose Timer // 6 Present #define SYSCTL_PPTIMER_P5 0x00000020 // 16/32-Bit General-Purpose Timer // 5 Present #define SYSCTL_PPTIMER_P4 0x00000010 // 16/32-Bit General-Purpose Timer // 4 Present #define SYSCTL_PPTIMER_P3 0x00000008 // 16/32-Bit General-Purpose Timer // 3 Present #define SYSCTL_PPTIMER_P2 0x00000004 // 16/32-Bit General-Purpose Timer // 2 Present #define SYSCTL_PPTIMER_P1 0x00000002 // 16/32-Bit General-Purpose Timer // 1 Present #define SYSCTL_PPTIMER_P0 0x00000001 // 16/32-Bit General-Purpose Timer // 0 Present //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PPGPIO register. // //***************************************************************************** #define SYSCTL_PPGPIO_P17 0x00020000 // GPIO Port T Present #define SYSCTL_PPGPIO_P16 0x00010000 // GPIO Port S Present #define SYSCTL_PPGPIO_P15 0x00008000 // GPIO Port R Present #define SYSCTL_PPGPIO_P14 0x00004000 // GPIO Port Q Present #define SYSCTL_PPGPIO_P13 0x00002000 // GPIO Port P Present #define SYSCTL_PPGPIO_P12 0x00001000 // GPIO Port N Present #define SYSCTL_PPGPIO_P11 0x00000800 // GPIO Port M Present #define SYSCTL_PPGPIO_P10 0x00000400 // GPIO Port L Present #define SYSCTL_PPGPIO_P9 0x00000200 // GPIO Port K Present #define SYSCTL_PPGPIO_P8 0x00000100 // GPIO Port J Present #define SYSCTL_PPGPIO_P7 0x00000080 // GPIO Port H Present #define SYSCTL_PPGPIO_P6 0x00000040 // GPIO Port G Present #define SYSCTL_PPGPIO_P5 0x00000020 // GPIO Port F Present #define SYSCTL_PPGPIO_P4 0x00000010 // GPIO Port E Present #define SYSCTL_PPGPIO_P3 0x00000008 // GPIO Port D Present #define SYSCTL_PPGPIO_P2 0x00000004 // GPIO Port C Present #define SYSCTL_PPGPIO_P1 0x00000002 // GPIO Port B Present #define SYSCTL_PPGPIO_P0 0x00000001 // GPIO Port A Present //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PPDMA register. // //***************************************************************************** #define SYSCTL_PPDMA_P0 0x00000001 // uDMA Module Present //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PPEPI register. // //***************************************************************************** #define SYSCTL_PPEPI_P0 0x00000001 // EPI Module Present //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PPHIB register. // //***************************************************************************** #define SYSCTL_PPHIB_P0 0x00000001 // Hibernation Module Present //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PPUART register. // //***************************************************************************** #define SYSCTL_PPUART_P7 0x00000080 // UART Module 7 Present #define SYSCTL_PPUART_P6 0x00000040 // UART Module 6 Present #define SYSCTL_PPUART_P5 0x00000020 // UART Module 5 Present #define SYSCTL_PPUART_P4 0x00000010 // UART Module 4 Present #define SYSCTL_PPUART_P3 0x00000008 // UART Module 3 Present #define SYSCTL_PPUART_P2 0x00000004 // UART Module 2 Present #define SYSCTL_PPUART_P1 0x00000002 // UART Module 1 Present #define SYSCTL_PPUART_P0 0x00000001 // UART Module 0 Present //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PPSSI register. // //***************************************************************************** #define SYSCTL_PPSSI_P3 0x00000008 // SSI Module 3 Present #define SYSCTL_PPSSI_P2 0x00000004 // SSI Module 2 Present #define SYSCTL_PPSSI_P1 0x00000002 // SSI Module 1 Present #define SYSCTL_PPSSI_P0 0x00000001 // SSI Module 0 Present //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PPI2C register. // //***************************************************************************** #define SYSCTL_PPI2C_P9 0x00000200 // I2C Module 9 Present #define SYSCTL_PPI2C_P8 0x00000100 // I2C Module 8 Present #define SYSCTL_PPI2C_P7 0x00000080 // I2C Module 7 Present #define SYSCTL_PPI2C_P6 0x00000040 // I2C Module 6 Present #define SYSCTL_PPI2C_P5 0x00000020 // I2C Module 5 Present #define SYSCTL_PPI2C_P4 0x00000010 // I2C Module 4 Present #define SYSCTL_PPI2C_P3 0x00000008 // I2C Module 3 Present #define SYSCTL_PPI2C_P2 0x00000004 // I2C Module 2 Present #define SYSCTL_PPI2C_P1 0x00000002 // I2C Module 1 Present #define SYSCTL_PPI2C_P0 0x00000001 // I2C Module 0 Present //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PPUSB register. // //***************************************************************************** #define SYSCTL_PPUSB_P0 0x00000001 // USB Module Present //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PPEPHY register. // //***************************************************************************** #define SYSCTL_PPEPHY_P0 0x00000001 // Ethernet PHY Module Present //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PPCAN register. // //***************************************************************************** #define SYSCTL_PPCAN_P1 0x00000002 // CAN Module 1 Present #define SYSCTL_PPCAN_P0 0x00000001 // CAN Module 0 Present //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PPADC register. // //***************************************************************************** #define SYSCTL_PPADC_P1 0x00000002 // ADC Module 1 Present #define SYSCTL_PPADC_P0 0x00000001 // ADC Module 0 Present //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PPACMP register. // //***************************************************************************** #define SYSCTL_PPACMP_P0 0x00000001 // Analog Comparator Module Present //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PPPWM register. // //***************************************************************************** #define SYSCTL_PPPWM_P1 0x00000002 // PWM Module 1 Present #define SYSCTL_PPPWM_P0 0x00000001 // PWM Module 0 Present //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PPQEI register. // //***************************************************************************** #define SYSCTL_PPQEI_P1 0x00000002 // QEI Module 1 Present #define SYSCTL_PPQEI_P0 0x00000001 // QEI Module 0 Present //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PPLPC register. // //***************************************************************************** #define SYSCTL_PPLPC_P0 0x00000001 // LPC Module Present //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PPPECI register. // //***************************************************************************** #define SYSCTL_PPPECI_P0 0x00000001 // PECI Module Present //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PPFAN register. // //***************************************************************************** #define SYSCTL_PPFAN_P0 0x00000001 // FAN Module 0 Present //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PPEEPROM // register. // //***************************************************************************** #define SYSCTL_PPEEPROM_P0 0x00000001 // EEPROM Module Present //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PPWTIMER // register. // //***************************************************************************** #define SYSCTL_PPWTIMER_P5 0x00000020 // 32/64-Bit Wide General-Purpose // Timer 5 Present #define SYSCTL_PPWTIMER_P4 0x00000010 // 32/64-Bit Wide General-Purpose // Timer 4 Present #define SYSCTL_PPWTIMER_P3 0x00000008 // 32/64-Bit Wide General-Purpose // Timer 3 Present #define SYSCTL_PPWTIMER_P2 0x00000004 // 32/64-Bit Wide General-Purpose // Timer 2 Present #define SYSCTL_PPWTIMER_P1 0x00000002 // 32/64-Bit Wide General-Purpose // Timer 1 Present #define SYSCTL_PPWTIMER_P0 0x00000001 // 32/64-Bit Wide General-Purpose // Timer 0 Present //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PPRTS register. // //***************************************************************************** #define SYSCTL_PPRTS_P0 0x00000001 // RTS Module Present //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PPCCM register. // //***************************************************************************** #define SYSCTL_PPCCM_P0 0x00000001 // CRC and Cryptographic Modules // Present //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PPLCD register. // //***************************************************************************** #define SYSCTL_PPLCD_P0 0x00000001 // LCD Module Present //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PPOWIRE register. // //***************************************************************************** #define SYSCTL_PPOWIRE_P0 0x00000001 // 1-Wire Module Present //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PPEMAC register. // //***************************************************************************** #define SYSCTL_PPEMAC_P0 0x00000001 // Ethernet Controller Module // Present //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PPHIM register. // //***************************************************************************** #define SYSCTL_PPHIM_P0 0x00000001 // HIM Module Present //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SRWD register. // //***************************************************************************** #define SYSCTL_SRWD_R1 0x00000002 // Watchdog Timer 1 Software Reset #define SYSCTL_SRWD_R0 0x00000001 // Watchdog Timer 0 Software Reset //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SRTIMER register. // //***************************************************************************** #define SYSCTL_SRTIMER_R7 0x00000080 // 16/32-Bit General-Purpose Timer // 7 Software Reset #define SYSCTL_SRTIMER_R6 0x00000040 // 16/32-Bit General-Purpose Timer // 6 Software Reset #define SYSCTL_SRTIMER_R5 0x00000020 // 16/32-Bit General-Purpose Timer // 5 Software Reset #define SYSCTL_SRTIMER_R4 0x00000010 // 16/32-Bit General-Purpose Timer // 4 Software Reset #define SYSCTL_SRTIMER_R3 0x00000008 // 16/32-Bit General-Purpose Timer // 3 Software Reset #define SYSCTL_SRTIMER_R2 0x00000004 // 16/32-Bit General-Purpose Timer // 2 Software Reset #define SYSCTL_SRTIMER_R1 0x00000002 // 16/32-Bit General-Purpose Timer // 1 Software Reset #define SYSCTL_SRTIMER_R0 0x00000001 // 16/32-Bit General-Purpose Timer // 0 Software Reset //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SRGPIO register. // //***************************************************************************** #define SYSCTL_SRGPIO_R17 0x00020000 // GPIO Port T Software Reset #define SYSCTL_SRGPIO_R16 0x00010000 // GPIO Port S Software Reset #define SYSCTL_SRGPIO_R15 0x00008000 // GPIO Port R Software Reset #define SYSCTL_SRGPIO_R14 0x00004000 // GPIO Port Q Software Reset #define SYSCTL_SRGPIO_R13 0x00002000 // GPIO Port P Software Reset #define SYSCTL_SRGPIO_R12 0x00001000 // GPIO Port N Software Reset #define SYSCTL_SRGPIO_R11 0x00000800 // GPIO Port M Software Reset #define SYSCTL_SRGPIO_R10 0x00000400 // GPIO Port L Software Reset #define SYSCTL_SRGPIO_R9 0x00000200 // GPIO Port K Software Reset #define SYSCTL_SRGPIO_R8 0x00000100 // GPIO Port J Software Reset #define SYSCTL_SRGPIO_R7 0x00000080 // GPIO Port H Software Reset #define SYSCTL_SRGPIO_R6 0x00000040 // GPIO Port G Software Reset #define SYSCTL_SRGPIO_R5 0x00000020 // GPIO Port F Software Reset #define SYSCTL_SRGPIO_R4 0x00000010 // GPIO Port E Software Reset #define SYSCTL_SRGPIO_R3 0x00000008 // GPIO Port D Software Reset #define SYSCTL_SRGPIO_R2 0x00000004 // GPIO Port C Software Reset #define SYSCTL_SRGPIO_R1 0x00000002 // GPIO Port B Software Reset #define SYSCTL_SRGPIO_R0 0x00000001 // GPIO Port A Software Reset //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SRDMA register. // //***************************************************************************** #define SYSCTL_SRDMA_R0 0x00000001 // uDMA Module Software Reset //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SREPI register. // //***************************************************************************** #define SYSCTL_SREPI_R0 0x00000001 // EPI Module Software Reset //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SRHIB register. // //***************************************************************************** #define SYSCTL_SRHIB_R0 0x00000001 // Hibernation Module Software // Reset //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SRUART register. // //***************************************************************************** #define SYSCTL_SRUART_R7 0x00000080 // UART Module 7 Software Reset #define SYSCTL_SRUART_R6 0x00000040 // UART Module 6 Software Reset #define SYSCTL_SRUART_R5 0x00000020 // UART Module 5 Software Reset #define SYSCTL_SRUART_R4 0x00000010 // UART Module 4 Software Reset #define SYSCTL_SRUART_R3 0x00000008 // UART Module 3 Software Reset #define SYSCTL_SRUART_R2 0x00000004 // UART Module 2 Software Reset #define SYSCTL_SRUART_R1 0x00000002 // UART Module 1 Software Reset #define SYSCTL_SRUART_R0 0x00000001 // UART Module 0 Software Reset //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SRSSI register. // //***************************************************************************** #define SYSCTL_SRSSI_R3 0x00000008 // SSI Module 3 Software Reset #define SYSCTL_SRSSI_R2 0x00000004 // SSI Module 2 Software Reset #define SYSCTL_SRSSI_R1 0x00000002 // SSI Module 1 Software Reset #define SYSCTL_SRSSI_R0 0x00000001 // SSI Module 0 Software Reset //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SRI2C register. // //***************************************************************************** #define SYSCTL_SRI2C_R9 0x00000200 // I2C Module 9 Software Reset #define SYSCTL_SRI2C_R8 0x00000100 // I2C Module 8 Software Reset #define SYSCTL_SRI2C_R7 0x00000080 // I2C Module 7 Software Reset #define SYSCTL_SRI2C_R6 0x00000040 // I2C Module 6 Software Reset #define SYSCTL_SRI2C_R5 0x00000020 // I2C Module 5 Software Reset #define SYSCTL_SRI2C_R4 0x00000010 // I2C Module 4 Software Reset #define SYSCTL_SRI2C_R3 0x00000008 // I2C Module 3 Software Reset #define SYSCTL_SRI2C_R2 0x00000004 // I2C Module 2 Software Reset #define SYSCTL_SRI2C_R1 0x00000002 // I2C Module 1 Software Reset #define SYSCTL_SRI2C_R0 0x00000001 // I2C Module 0 Software Reset //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SRUSB register. // //***************************************************************************** #define SYSCTL_SRUSB_R0 0x00000001 // USB Module Software Reset //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SREPHY register. // //***************************************************************************** #define SYSCTL_SREPHY_R0 0x00000001 // Ethernet PHY Module Software // Reset //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SRCAN register. // //***************************************************************************** #define SYSCTL_SRCAN_R1 0x00000002 // CAN Module 1 Software Reset #define SYSCTL_SRCAN_R0 0x00000001 // CAN Module 0 Software Reset //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SRADC register. // //***************************************************************************** #define SYSCTL_SRADC_R1 0x00000002 // ADC Module 1 Software Reset #define SYSCTL_SRADC_R0 0x00000001 // ADC Module 0 Software Reset //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SRACMP register. // //***************************************************************************** #define SYSCTL_SRACMP_R0 0x00000001 // Analog Comparator Module 0 // Software Reset //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SRPWM register. // //***************************************************************************** #define SYSCTL_SRPWM_R1 0x00000002 // PWM Module 1 Software Reset #define SYSCTL_SRPWM_R0 0x00000001 // PWM Module 0 Software Reset //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SRQEI register. // //***************************************************************************** #define SYSCTL_SRQEI_R1 0x00000002 // QEI Module 1 Software Reset #define SYSCTL_SRQEI_R0 0x00000001 // QEI Module 0 Software Reset //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SREEPROM // register. // //***************************************************************************** #define SYSCTL_SREEPROM_R0 0x00000001 // EEPROM Module Software Reset //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SRWTIMER // register. // //***************************************************************************** #define SYSCTL_SRWTIMER_R5 0x00000020 // 32/64-Bit Wide General-Purpose // Timer 5 Software Reset #define SYSCTL_SRWTIMER_R4 0x00000010 // 32/64-Bit Wide General-Purpose // Timer 4 Software Reset #define SYSCTL_SRWTIMER_R3 0x00000008 // 32/64-Bit Wide General-Purpose // Timer 3 Software Reset #define SYSCTL_SRWTIMER_R2 0x00000004 // 32/64-Bit Wide General-Purpose // Timer 2 Software Reset #define SYSCTL_SRWTIMER_R1 0x00000002 // 32/64-Bit Wide General-Purpose // Timer 1 Software Reset #define SYSCTL_SRWTIMER_R0 0x00000001 // 32/64-Bit Wide General-Purpose // Timer 0 Software Reset //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SRCCM register. // //***************************************************************************** #define SYSCTL_SRCCM_R0 0x00000001 // CRC and Cryptographic Modules // Software Reset //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SRLCD register. // //***************************************************************************** #define SYSCTL_SRLCD_R0 0x00000001 // LCD Module 0 Software Reset //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SROWIRE register. // //***************************************************************************** #define SYSCTL_SROWIRE_R0 0x00000001 // 1-Wire Module Software Reset //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SREMAC register. // //***************************************************************************** #define SYSCTL_SREMAC_R0 0x00000001 // Ethernet Controller MAC Module 0 // Software Reset //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_RCGCWD register. // //***************************************************************************** #define SYSCTL_RCGCWD_R1 0x00000002 // Watchdog Timer 1 Run Mode Clock // Gating Control #define SYSCTL_RCGCWD_R0 0x00000001 // Watchdog Timer 0 Run Mode Clock // Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_RCGCTIMER // register. // //***************************************************************************** #define SYSCTL_RCGCTIMER_R7 0x00000080 // 16/32-Bit General-Purpose Timer // 7 Run Mode Clock Gating Control #define SYSCTL_RCGCTIMER_R6 0x00000040 // 16/32-Bit General-Purpose Timer // 6 Run Mode Clock Gating Control #define SYSCTL_RCGCTIMER_R5 0x00000020 // 16/32-Bit General-Purpose Timer // 5 Run Mode Clock Gating Control #define SYSCTL_RCGCTIMER_R4 0x00000010 // 16/32-Bit General-Purpose Timer // 4 Run Mode Clock Gating Control #define SYSCTL_RCGCTIMER_R3 0x00000008 // 16/32-Bit General-Purpose Timer // 3 Run Mode Clock Gating Control #define SYSCTL_RCGCTIMER_R2 0x00000004 // 16/32-Bit General-Purpose Timer // 2 Run Mode Clock Gating Control #define SYSCTL_RCGCTIMER_R1 0x00000002 // 16/32-Bit General-Purpose Timer // 1 Run Mode Clock Gating Control #define SYSCTL_RCGCTIMER_R0 0x00000001 // 16/32-Bit General-Purpose Timer // 0 Run Mode Clock Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_RCGCGPIO // register. // //***************************************************************************** #define SYSCTL_RCGCGPIO_R17 0x00020000 // GPIO Port T Run Mode Clock // Gating Control #define SYSCTL_RCGCGPIO_R16 0x00010000 // GPIO Port S Run Mode Clock // Gating Control #define SYSCTL_RCGCGPIO_R15 0x00008000 // GPIO Port R Run Mode Clock // Gating Control #define SYSCTL_RCGCGPIO_R14 0x00004000 // GPIO Port Q Run Mode Clock // Gating Control #define SYSCTL_RCGCGPIO_R13 0x00002000 // GPIO Port P Run Mode Clock // Gating Control #define SYSCTL_RCGCGPIO_R12 0x00001000 // GPIO Port N Run Mode Clock // Gating Control #define SYSCTL_RCGCGPIO_R11 0x00000800 // GPIO Port M Run Mode Clock // Gating Control #define SYSCTL_RCGCGPIO_R10 0x00000400 // GPIO Port L Run Mode Clock // Gating Control #define SYSCTL_RCGCGPIO_R9 0x00000200 // GPIO Port K Run Mode Clock // Gating Control #define SYSCTL_RCGCGPIO_R8 0x00000100 // GPIO Port J Run Mode Clock // Gating Control #define SYSCTL_RCGCGPIO_R7 0x00000080 // GPIO Port H Run Mode Clock // Gating Control #define SYSCTL_RCGCGPIO_R6 0x00000040 // GPIO Port G Run Mode Clock // Gating Control #define SYSCTL_RCGCGPIO_R5 0x00000020 // GPIO Port F Run Mode Clock // Gating Control #define SYSCTL_RCGCGPIO_R4 0x00000010 // GPIO Port E Run Mode Clock // Gating Control #define SYSCTL_RCGCGPIO_R3 0x00000008 // GPIO Port D Run Mode Clock // Gating Control #define SYSCTL_RCGCGPIO_R2 0x00000004 // GPIO Port C Run Mode Clock // Gating Control #define SYSCTL_RCGCGPIO_R1 0x00000002 // GPIO Port B Run Mode Clock // Gating Control #define SYSCTL_RCGCGPIO_R0 0x00000001 // GPIO Port A Run Mode Clock // Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_RCGCDMA register. // //***************************************************************************** #define SYSCTL_RCGCDMA_R0 0x00000001 // uDMA Module Run Mode Clock // Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_RCGCEPI register. // //***************************************************************************** #define SYSCTL_RCGCEPI_R0 0x00000001 // EPI Module Run Mode Clock Gating // Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_RCGCHIB register. // //***************************************************************************** #define SYSCTL_RCGCHIB_R0 0x00000001 // Hibernation Module Run Mode // Clock Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_RCGCUART // register. // //***************************************************************************** #define SYSCTL_RCGCUART_R7 0x00000080 // UART Module 7 Run Mode Clock // Gating Control #define SYSCTL_RCGCUART_R6 0x00000040 // UART Module 6 Run Mode Clock // Gating Control #define SYSCTL_RCGCUART_R5 0x00000020 // UART Module 5 Run Mode Clock // Gating Control #define SYSCTL_RCGCUART_R4 0x00000010 // UART Module 4 Run Mode Clock // Gating Control #define SYSCTL_RCGCUART_R3 0x00000008 // UART Module 3 Run Mode Clock // Gating Control #define SYSCTL_RCGCUART_R2 0x00000004 // UART Module 2 Run Mode Clock // Gating Control #define SYSCTL_RCGCUART_R1 0x00000002 // UART Module 1 Run Mode Clock // Gating Control #define SYSCTL_RCGCUART_R0 0x00000001 // UART Module 0 Run Mode Clock // Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_RCGCSSI register. // //***************************************************************************** #define SYSCTL_RCGCSSI_R3 0x00000008 // SSI Module 3 Run Mode Clock // Gating Control #define SYSCTL_RCGCSSI_R2 0x00000004 // SSI Module 2 Run Mode Clock // Gating Control #define SYSCTL_RCGCSSI_R1 0x00000002 // SSI Module 1 Run Mode Clock // Gating Control #define SYSCTL_RCGCSSI_R0 0x00000001 // SSI Module 0 Run Mode Clock // Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_RCGCI2C register. // //***************************************************************************** #define SYSCTL_RCGCI2C_R9 0x00000200 // I2C Module 9 Run Mode Clock // Gating Control #define SYSCTL_RCGCI2C_R8 0x00000100 // I2C Module 8 Run Mode Clock // Gating Control #define SYSCTL_RCGCI2C_R7 0x00000080 // I2C Module 7 Run Mode Clock // Gating Control #define SYSCTL_RCGCI2C_R6 0x00000040 // I2C Module 6 Run Mode Clock // Gating Control #define SYSCTL_RCGCI2C_R5 0x00000020 // I2C Module 5 Run Mode Clock // Gating Control #define SYSCTL_RCGCI2C_R4 0x00000010 // I2C Module 4 Run Mode Clock // Gating Control #define SYSCTL_RCGCI2C_R3 0x00000008 // I2C Module 3 Run Mode Clock // Gating Control #define SYSCTL_RCGCI2C_R2 0x00000004 // I2C Module 2 Run Mode Clock // Gating Control #define SYSCTL_RCGCI2C_R1 0x00000002 // I2C Module 1 Run Mode Clock // Gating Control #define SYSCTL_RCGCI2C_R0 0x00000001 // I2C Module 0 Run Mode Clock // Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_RCGCUSB register. // //***************************************************************************** #define SYSCTL_RCGCUSB_R0 0x00000001 // USB Module Run Mode Clock Gating // Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_RCGCEPHY // register. // //***************************************************************************** #define SYSCTL_RCGCEPHY_R0 0x00000001 // Ethernet PHY Module Run Mode // Clock Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_RCGCCAN register. // //***************************************************************************** #define SYSCTL_RCGCCAN_R1 0x00000002 // CAN Module 1 Run Mode Clock // Gating Control #define SYSCTL_RCGCCAN_R0 0x00000001 // CAN Module 0 Run Mode Clock // Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_RCGCADC register. // //***************************************************************************** #define SYSCTL_RCGCADC_R1 0x00000002 // ADC Module 1 Run Mode Clock // Gating Control #define SYSCTL_RCGCADC_R0 0x00000001 // ADC Module 0 Run Mode Clock // Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_RCGCACMP // register. // //***************************************************************************** #define SYSCTL_RCGCACMP_R0 0x00000001 // Analog Comparator Module 0 Run // Mode Clock Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_RCGCPWM register. // //***************************************************************************** #define SYSCTL_RCGCPWM_R1 0x00000002 // PWM Module 1 Run Mode Clock // Gating Control #define SYSCTL_RCGCPWM_R0 0x00000001 // PWM Module 0 Run Mode Clock // Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_RCGCQEI register. // //***************************************************************************** #define SYSCTL_RCGCQEI_R1 0x00000002 // QEI Module 1 Run Mode Clock // Gating Control #define SYSCTL_RCGCQEI_R0 0x00000001 // QEI Module 0 Run Mode Clock // Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_RCGCEEPROM // register. // //***************************************************************************** #define SYSCTL_RCGCEEPROM_R0 0x00000001 // EEPROM Module Run Mode Clock // Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_RCGCWTIMER // register. // //***************************************************************************** #define SYSCTL_RCGCWTIMER_R5 0x00000020 // 32/64-Bit Wide General-Purpose // Timer 5 Run Mode Clock Gating // Control #define SYSCTL_RCGCWTIMER_R4 0x00000010 // 32/64-Bit Wide General-Purpose // Timer 4 Run Mode Clock Gating // Control #define SYSCTL_RCGCWTIMER_R3 0x00000008 // 32/64-Bit Wide General-Purpose // Timer 3 Run Mode Clock Gating // Control #define SYSCTL_RCGCWTIMER_R2 0x00000004 // 32/64-Bit Wide General-Purpose // Timer 2 Run Mode Clock Gating // Control #define SYSCTL_RCGCWTIMER_R1 0x00000002 // 32/64-Bit Wide General-Purpose // Timer 1 Run Mode Clock Gating // Control #define SYSCTL_RCGCWTIMER_R0 0x00000001 // 32/64-Bit Wide General-Purpose // Timer 0 Run Mode Clock Gating // Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_RCGCCCM register. // //***************************************************************************** #define SYSCTL_RCGCCCM_R0 0x00000001 // CRC and Cryptographic Modules // Run Mode Clock Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_RCGCLCD register. // //***************************************************************************** #define SYSCTL_RCGCLCD_R0 0x00000001 // LCD Controller Module 0 Run Mode // Clock Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_RCGCOWIRE // register. // //***************************************************************************** #define SYSCTL_RCGCOWIRE_R0 0x00000001 // 1-Wire Module 0 Run Mode Clock // Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_RCGCEMAC // register. // //***************************************************************************** #define SYSCTL_RCGCEMAC_R0 0x00000001 // Ethernet MAC Module 0 Run Mode // Clock Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SCGCWD register. // //***************************************************************************** #define SYSCTL_SCGCWD_S1 0x00000002 // Watchdog Timer 1 Sleep Mode // Clock Gating Control #define SYSCTL_SCGCWD_S0 0x00000001 // Watchdog Timer 0 Sleep Mode // Clock Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SCGCTIMER // register. // //***************************************************************************** #define SYSCTL_SCGCTIMER_S7 0x00000080 // 16/32-Bit General-Purpose Timer // 7 Sleep Mode Clock Gating // Control #define SYSCTL_SCGCTIMER_S6 0x00000040 // 16/32-Bit General-Purpose Timer // 6 Sleep Mode Clock Gating // Control #define SYSCTL_SCGCTIMER_S5 0x00000020 // 16/32-Bit General-Purpose Timer // 5 Sleep Mode Clock Gating // Control #define SYSCTL_SCGCTIMER_S4 0x00000010 // 16/32-Bit General-Purpose Timer // 4 Sleep Mode Clock Gating // Control #define SYSCTL_SCGCTIMER_S3 0x00000008 // 16/32-Bit General-Purpose Timer // 3 Sleep Mode Clock Gating // Control #define SYSCTL_SCGCTIMER_S2 0x00000004 // 16/32-Bit General-Purpose Timer // 2 Sleep Mode Clock Gating // Control #define SYSCTL_SCGCTIMER_S1 0x00000002 // 16/32-Bit General-Purpose Timer // 1 Sleep Mode Clock Gating // Control #define SYSCTL_SCGCTIMER_S0 0x00000001 // 16/32-Bit General-Purpose Timer // 0 Sleep Mode Clock Gating // Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SCGCGPIO // register. // //***************************************************************************** #define SYSCTL_SCGCGPIO_S17 0x00020000 // GPIO Port T Sleep Mode Clock // Gating Control #define SYSCTL_SCGCGPIO_S16 0x00010000 // GPIO Port S Sleep Mode Clock // Gating Control #define SYSCTL_SCGCGPIO_S15 0x00008000 // GPIO Port R Sleep Mode Clock // Gating Control #define SYSCTL_SCGCGPIO_S14 0x00004000 // GPIO Port Q Sleep Mode Clock // Gating Control #define SYSCTL_SCGCGPIO_S13 0x00002000 // GPIO Port P Sleep Mode Clock // Gating Control #define SYSCTL_SCGCGPIO_S12 0x00001000 // GPIO Port N Sleep Mode Clock // Gating Control #define SYSCTL_SCGCGPIO_S11 0x00000800 // GPIO Port M Sleep Mode Clock // Gating Control #define SYSCTL_SCGCGPIO_S10 0x00000400 // GPIO Port L Sleep Mode Clock // Gating Control #define SYSCTL_SCGCGPIO_S9 0x00000200 // GPIO Port K Sleep Mode Clock // Gating Control #define SYSCTL_SCGCGPIO_S8 0x00000100 // GPIO Port J Sleep Mode Clock // Gating Control #define SYSCTL_SCGCGPIO_S7 0x00000080 // GPIO Port H Sleep Mode Clock // Gating Control #define SYSCTL_SCGCGPIO_S6 0x00000040 // GPIO Port G Sleep Mode Clock // Gating Control #define SYSCTL_SCGCGPIO_S5 0x00000020 // GPIO Port F Sleep Mode Clock // Gating Control #define SYSCTL_SCGCGPIO_S4 0x00000010 // GPIO Port E Sleep Mode Clock // Gating Control #define SYSCTL_SCGCGPIO_S3 0x00000008 // GPIO Port D Sleep Mode Clock // Gating Control #define SYSCTL_SCGCGPIO_S2 0x00000004 // GPIO Port C Sleep Mode Clock // Gating Control #define SYSCTL_SCGCGPIO_S1 0x00000002 // GPIO Port B Sleep Mode Clock // Gating Control #define SYSCTL_SCGCGPIO_S0 0x00000001 // GPIO Port A Sleep Mode Clock // Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SCGCDMA register. // //***************************************************************************** #define SYSCTL_SCGCDMA_S0 0x00000001 // uDMA Module Sleep Mode Clock // Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SCGCEPI register. // //***************************************************************************** #define SYSCTL_SCGCEPI_S0 0x00000001 // EPI Module Sleep Mode Clock // Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SCGCHIB register. // //***************************************************************************** #define SYSCTL_SCGCHIB_S0 0x00000001 // Hibernation Module Sleep Mode // Clock Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SCGCUART // register. // //***************************************************************************** #define SYSCTL_SCGCUART_S7 0x00000080 // UART Module 7 Sleep Mode Clock // Gating Control #define SYSCTL_SCGCUART_S6 0x00000040 // UART Module 6 Sleep Mode Clock // Gating Control #define SYSCTL_SCGCUART_S5 0x00000020 // UART Module 5 Sleep Mode Clock // Gating Control #define SYSCTL_SCGCUART_S4 0x00000010 // UART Module 4 Sleep Mode Clock // Gating Control #define SYSCTL_SCGCUART_S3 0x00000008 // UART Module 3 Sleep Mode Clock // Gating Control #define SYSCTL_SCGCUART_S2 0x00000004 // UART Module 2 Sleep Mode Clock // Gating Control #define SYSCTL_SCGCUART_S1 0x00000002 // UART Module 1 Sleep Mode Clock // Gating Control #define SYSCTL_SCGCUART_S0 0x00000001 // UART Module 0 Sleep Mode Clock // Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SCGCSSI register. // //***************************************************************************** #define SYSCTL_SCGCSSI_S3 0x00000008 // SSI Module 3 Sleep Mode Clock // Gating Control #define SYSCTL_SCGCSSI_S2 0x00000004 // SSI Module 2 Sleep Mode Clock // Gating Control #define SYSCTL_SCGCSSI_S1 0x00000002 // SSI Module 1 Sleep Mode Clock // Gating Control #define SYSCTL_SCGCSSI_S0 0x00000001 // SSI Module 0 Sleep Mode Clock // Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SCGCI2C register. // //***************************************************************************** #define SYSCTL_SCGCI2C_S9 0x00000200 // I2C Module 9 Sleep Mode Clock // Gating Control #define SYSCTL_SCGCI2C_S8 0x00000100 // I2C Module 8 Sleep Mode Clock // Gating Control #define SYSCTL_SCGCI2C_S7 0x00000080 // I2C Module 7 Sleep Mode Clock // Gating Control #define SYSCTL_SCGCI2C_S6 0x00000040 // I2C Module 6 Sleep Mode Clock // Gating Control #define SYSCTL_SCGCI2C_S5 0x00000020 // I2C Module 5 Sleep Mode Clock // Gating Control #define SYSCTL_SCGCI2C_S4 0x00000010 // I2C Module 4 Sleep Mode Clock // Gating Control #define SYSCTL_SCGCI2C_S3 0x00000008 // I2C Module 3 Sleep Mode Clock // Gating Control #define SYSCTL_SCGCI2C_S2 0x00000004 // I2C Module 2 Sleep Mode Clock // Gating Control #define SYSCTL_SCGCI2C_S1 0x00000002 // I2C Module 1 Sleep Mode Clock // Gating Control #define SYSCTL_SCGCI2C_S0 0x00000001 // I2C Module 0 Sleep Mode Clock // Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SCGCUSB register. // //***************************************************************************** #define SYSCTL_SCGCUSB_S0 0x00000001 // USB Module Sleep Mode Clock // Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SCGCEPHY // register. // //***************************************************************************** #define SYSCTL_SCGCEPHY_S0 0x00000001 // PHY Module Sleep Mode Clock // Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SCGCCAN register. // //***************************************************************************** #define SYSCTL_SCGCCAN_S1 0x00000002 // CAN Module 1 Sleep Mode Clock // Gating Control #define SYSCTL_SCGCCAN_S0 0x00000001 // CAN Module 0 Sleep Mode Clock // Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SCGCADC register. // //***************************************************************************** #define SYSCTL_SCGCADC_S1 0x00000002 // ADC Module 1 Sleep Mode Clock // Gating Control #define SYSCTL_SCGCADC_S0 0x00000001 // ADC Module 0 Sleep Mode Clock // Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SCGCACMP // register. // //***************************************************************************** #define SYSCTL_SCGCACMP_S0 0x00000001 // Analog Comparator Module 0 Sleep // Mode Clock Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SCGCPWM register. // //***************************************************************************** #define SYSCTL_SCGCPWM_S1 0x00000002 // PWM Module 1 Sleep Mode Clock // Gating Control #define SYSCTL_SCGCPWM_S0 0x00000001 // PWM Module 0 Sleep Mode Clock // Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SCGCQEI register. // //***************************************************************************** #define SYSCTL_SCGCQEI_S1 0x00000002 // QEI Module 1 Sleep Mode Clock // Gating Control #define SYSCTL_SCGCQEI_S0 0x00000001 // QEI Module 0 Sleep Mode Clock // Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SCGCEEPROM // register. // //***************************************************************************** #define SYSCTL_SCGCEEPROM_S0 0x00000001 // EEPROM Module Sleep Mode Clock // Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SCGCWTIMER // register. // //***************************************************************************** #define SYSCTL_SCGCWTIMER_S5 0x00000020 // 32/64-Bit Wide General-Purpose // Timer 5 Sleep Mode Clock Gating // Control #define SYSCTL_SCGCWTIMER_S4 0x00000010 // 32/64-Bit Wide General-Purpose // Timer 4 Sleep Mode Clock Gating // Control #define SYSCTL_SCGCWTIMER_S3 0x00000008 // 32/64-Bit Wide General-Purpose // Timer 3 Sleep Mode Clock Gating // Control #define SYSCTL_SCGCWTIMER_S2 0x00000004 // 32/64-Bit Wide General-Purpose // Timer 2 Sleep Mode Clock Gating // Control #define SYSCTL_SCGCWTIMER_S1 0x00000002 // 32/64-Bit Wide General-Purpose // Timer 1 Sleep Mode Clock Gating // Control #define SYSCTL_SCGCWTIMER_S0 0x00000001 // 32/64-Bit Wide General-Purpose // Timer 0 Sleep Mode Clock Gating // Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SCGCCCM register. // //***************************************************************************** #define SYSCTL_SCGCCCM_S0 0x00000001 // CRC and Cryptographic Modules // Sleep Mode Clock Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SCGCLCD register. // //***************************************************************************** #define SYSCTL_SCGCLCD_S0 0x00000001 // LCD Controller Module 0 Sleep // Mode Clock Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SCGCOWIRE // register. // //***************************************************************************** #define SYSCTL_SCGCOWIRE_S0 0x00000001 // 1-Wire Module 0 Sleep Mode Clock // Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_SCGCEMAC // register. // //***************************************************************************** #define SYSCTL_SCGCEMAC_S0 0x00000001 // Ethernet MAC Module 0 Sleep Mode // Clock Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_DCGCWD register. // //***************************************************************************** #define SYSCTL_DCGCWD_D1 0x00000002 // Watchdog Timer 1 Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCWD_D0 0x00000001 // Watchdog Timer 0 Deep-Sleep Mode // Clock Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_DCGCTIMER // register. // //***************************************************************************** #define SYSCTL_DCGCTIMER_D7 0x00000080 // 16/32-Bit General-Purpose Timer // 7 Deep-Sleep Mode Clock Gating // Control #define SYSCTL_DCGCTIMER_D6 0x00000040 // 16/32-Bit General-Purpose Timer // 6 Deep-Sleep Mode Clock Gating // Control #define SYSCTL_DCGCTIMER_D5 0x00000020 // 16/32-Bit General-Purpose Timer // 5 Deep-Sleep Mode Clock Gating // Control #define SYSCTL_DCGCTIMER_D4 0x00000010 // 16/32-Bit General-Purpose Timer // 4 Deep-Sleep Mode Clock Gating // Control #define SYSCTL_DCGCTIMER_D3 0x00000008 // 16/32-Bit General-Purpose Timer // 3 Deep-Sleep Mode Clock Gating // Control #define SYSCTL_DCGCTIMER_D2 0x00000004 // 16/32-Bit General-Purpose Timer // 2 Deep-Sleep Mode Clock Gating // Control #define SYSCTL_DCGCTIMER_D1 0x00000002 // 16/32-Bit General-Purpose Timer // 1 Deep-Sleep Mode Clock Gating // Control #define SYSCTL_DCGCTIMER_D0 0x00000001 // 16/32-Bit General-Purpose Timer // 0 Deep-Sleep Mode Clock Gating // Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_DCGCGPIO // register. // //***************************************************************************** #define SYSCTL_DCGCGPIO_D17 0x00020000 // GPIO Port T Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCGPIO_D16 0x00010000 // GPIO Port S Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCGPIO_D15 0x00008000 // GPIO Port R Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCGPIO_D14 0x00004000 // GPIO Port Q Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCGPIO_D13 0x00002000 // GPIO Port P Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCGPIO_D12 0x00001000 // GPIO Port N Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCGPIO_D11 0x00000800 // GPIO Port M Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCGPIO_D10 0x00000400 // GPIO Port L Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCGPIO_D9 0x00000200 // GPIO Port K Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCGPIO_D8 0x00000100 // GPIO Port J Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCGPIO_D7 0x00000080 // GPIO Port H Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCGPIO_D6 0x00000040 // GPIO Port G Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCGPIO_D5 0x00000020 // GPIO Port F Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCGPIO_D4 0x00000010 // GPIO Port E Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCGPIO_D3 0x00000008 // GPIO Port D Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCGPIO_D2 0x00000004 // GPIO Port C Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCGPIO_D1 0x00000002 // GPIO Port B Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCGPIO_D0 0x00000001 // GPIO Port A Deep-Sleep Mode // Clock Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_DCGCDMA register. // //***************************************************************************** #define SYSCTL_DCGCDMA_D0 0x00000001 // uDMA Module Deep-Sleep Mode // Clock Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_DCGCEPI register. // //***************************************************************************** #define SYSCTL_DCGCEPI_D0 0x00000001 // EPI Module Deep-Sleep Mode Clock // Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_DCGCHIB register. // //***************************************************************************** #define SYSCTL_DCGCHIB_D0 0x00000001 // Hibernation Module Deep-Sleep // Mode Clock Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_DCGCUART // register. // //***************************************************************************** #define SYSCTL_DCGCUART_D7 0x00000080 // UART Module 7 Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCUART_D6 0x00000040 // UART Module 6 Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCUART_D5 0x00000020 // UART Module 5 Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCUART_D4 0x00000010 // UART Module 4 Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCUART_D3 0x00000008 // UART Module 3 Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCUART_D2 0x00000004 // UART Module 2 Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCUART_D1 0x00000002 // UART Module 1 Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCUART_D0 0x00000001 // UART Module 0 Deep-Sleep Mode // Clock Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_DCGCSSI register. // //***************************************************************************** #define SYSCTL_DCGCSSI_D3 0x00000008 // SSI Module 3 Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCSSI_D2 0x00000004 // SSI Module 2 Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCSSI_D1 0x00000002 // SSI Module 1 Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCSSI_D0 0x00000001 // SSI Module 0 Deep-Sleep Mode // Clock Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_DCGCI2C register. // //***************************************************************************** #define SYSCTL_DCGCI2C_D9 0x00000200 // I2C Module 9 Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCI2C_D8 0x00000100 // I2C Module 8 Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCI2C_D7 0x00000080 // I2C Module 7 Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCI2C_D6 0x00000040 // I2C Module 6 Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCI2C_D5 0x00000020 // I2C Module 5 Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCI2C_D4 0x00000010 // I2C Module 4 Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCI2C_D3 0x00000008 // I2C Module 3 Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCI2C_D2 0x00000004 // I2C Module 2 Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCI2C_D1 0x00000002 // I2C Module 1 Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCI2C_D0 0x00000001 // I2C Module 0 Deep-Sleep Mode // Clock Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_DCGCUSB register. // //***************************************************************************** #define SYSCTL_DCGCUSB_D0 0x00000001 // USB Module Deep-Sleep Mode Clock // Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_DCGCEPHY // register. // //***************************************************************************** #define SYSCTL_DCGCEPHY_D0 0x00000001 // PHY Module Deep-Sleep Mode Clock // Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_DCGCCAN register. // //***************************************************************************** #define SYSCTL_DCGCCAN_D1 0x00000002 // CAN Module 1 Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCCAN_D0 0x00000001 // CAN Module 0 Deep-Sleep Mode // Clock Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_DCGCADC register. // //***************************************************************************** #define SYSCTL_DCGCADC_D1 0x00000002 // ADC Module 1 Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCADC_D0 0x00000001 // ADC Module 0 Deep-Sleep Mode // Clock Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_DCGCACMP // register. // //***************************************************************************** #define SYSCTL_DCGCACMP_D0 0x00000001 // Analog Comparator Module 0 // Deep-Sleep Mode Clock Gating // Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_DCGCPWM register. // //***************************************************************************** #define SYSCTL_DCGCPWM_D1 0x00000002 // PWM Module 1 Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCPWM_D0 0x00000001 // PWM Module 0 Deep-Sleep Mode // Clock Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_DCGCQEI register. // //***************************************************************************** #define SYSCTL_DCGCQEI_D1 0x00000002 // QEI Module 1 Deep-Sleep Mode // Clock Gating Control #define SYSCTL_DCGCQEI_D0 0x00000001 // QEI Module 0 Deep-Sleep Mode // Clock Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_DCGCEEPROM // register. // //***************************************************************************** #define SYSCTL_DCGCEEPROM_D0 0x00000001 // EEPROM Module Deep-Sleep Mode // Clock Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_DCGCWTIMER // register. // //***************************************************************************** #define SYSCTL_DCGCWTIMER_D5 0x00000020 // 32/64-Bit Wide General-Purpose // Timer 5 Deep-Sleep Mode Clock // Gating Control #define SYSCTL_DCGCWTIMER_D4 0x00000010 // 32/64-Bit Wide General-Purpose // Timer 4 Deep-Sleep Mode Clock // Gating Control #define SYSCTL_DCGCWTIMER_D3 0x00000008 // 32/64-Bit Wide General-Purpose // Timer 3 Deep-Sleep Mode Clock // Gating Control #define SYSCTL_DCGCWTIMER_D2 0x00000004 // 32/64-Bit Wide General-Purpose // Timer 2 Deep-Sleep Mode Clock // Gating Control #define SYSCTL_DCGCWTIMER_D1 0x00000002 // 32/64-Bit Wide General-Purpose // Timer 1 Deep-Sleep Mode Clock // Gating Control #define SYSCTL_DCGCWTIMER_D0 0x00000001 // 32/64-Bit Wide General-Purpose // Timer 0 Deep-Sleep Mode Clock // Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_DCGCCCM register. // //***************************************************************************** #define SYSCTL_DCGCCCM_D0 0x00000001 // CRC and Cryptographic Modules // Deep-Sleep Mode Clock Gating // Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_DCGCLCD register. // //***************************************************************************** #define SYSCTL_DCGCLCD_D0 0x00000001 // LCD Controller Module 0 // Deep-Sleep Mode Clock Gating // Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_DCGCOWIRE // register. // //***************************************************************************** #define SYSCTL_DCGCOWIRE_D0 0x00000001 // 1-Wire Module 0 Deep-Sleep Mode // Clock Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_DCGCEMAC // register. // //***************************************************************************** #define SYSCTL_DCGCEMAC_D0 0x00000001 // Ethernet MAC Module 0 Deep-Sleep // Mode Clock Gating Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PCWD register. // //***************************************************************************** #define SYSCTL_PCWD_P1 0x00000002 // Watchdog Timer 1 Power Control #define SYSCTL_PCWD_P0 0x00000001 // Watchdog Timer 0 Power Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PCTIMER register. // //***************************************************************************** #define SYSCTL_PCTIMER_P7 0x00000080 // General-Purpose Timer 7 Power // Control #define SYSCTL_PCTIMER_P6 0x00000040 // General-Purpose Timer 6 Power // Control #define SYSCTL_PCTIMER_P5 0x00000020 // General-Purpose Timer 5 Power // Control #define SYSCTL_PCTIMER_P4 0x00000010 // General-Purpose Timer 4 Power // Control #define SYSCTL_PCTIMER_P3 0x00000008 // General-Purpose Timer 3 Power // Control #define SYSCTL_PCTIMER_P2 0x00000004 // General-Purpose Timer 2 Power // Control #define SYSCTL_PCTIMER_P1 0x00000002 // General-Purpose Timer 1 Power // Control #define SYSCTL_PCTIMER_P0 0x00000001 // General-Purpose Timer 0 Power // Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PCGPIO register. // //***************************************************************************** #define SYSCTL_PCGPIO_P17 0x00020000 // GPIO Port T Power Control #define SYSCTL_PCGPIO_P16 0x00010000 // GPIO Port S Power Control #define SYSCTL_PCGPIO_P15 0x00008000 // GPIO Port R Power Control #define SYSCTL_PCGPIO_P14 0x00004000 // GPIO Port Q Power Control #define SYSCTL_PCGPIO_P13 0x00002000 // GPIO Port P Power Control #define SYSCTL_PCGPIO_P12 0x00001000 // GPIO Port N Power Control #define SYSCTL_PCGPIO_P11 0x00000800 // GPIO Port M Power Control #define SYSCTL_PCGPIO_P10 0x00000400 // GPIO Port L Power Control #define SYSCTL_PCGPIO_P9 0x00000200 // GPIO Port K Power Control #define SYSCTL_PCGPIO_P8 0x00000100 // GPIO Port J Power Control #define SYSCTL_PCGPIO_P7 0x00000080 // GPIO Port H Power Control #define SYSCTL_PCGPIO_P6 0x00000040 // GPIO Port G Power Control #define SYSCTL_PCGPIO_P5 0x00000020 // GPIO Port F Power Control #define SYSCTL_PCGPIO_P4 0x00000010 // GPIO Port E Power Control #define SYSCTL_PCGPIO_P3 0x00000008 // GPIO Port D Power Control #define SYSCTL_PCGPIO_P2 0x00000004 // GPIO Port C Power Control #define SYSCTL_PCGPIO_P1 0x00000002 // GPIO Port B Power Control #define SYSCTL_PCGPIO_P0 0x00000001 // GPIO Port A Power Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PCDMA register. // //***************************************************************************** #define SYSCTL_PCDMA_P0 0x00000001 // uDMA Module Power Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PCEPI register. // //***************************************************************************** #define SYSCTL_PCEPI_P0 0x00000001 // EPI Module Power Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PCHIB register. // //***************************************************************************** #define SYSCTL_PCHIB_P0 0x00000001 // Hibernation Module Power Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PCUART register. // //***************************************************************************** #define SYSCTL_PCUART_P7 0x00000080 // UART Module 7 Power Control #define SYSCTL_PCUART_P6 0x00000040 // UART Module 6 Power Control #define SYSCTL_PCUART_P5 0x00000020 // UART Module 5 Power Control #define SYSCTL_PCUART_P4 0x00000010 // UART Module 4 Power Control #define SYSCTL_PCUART_P3 0x00000008 // UART Module 3 Power Control #define SYSCTL_PCUART_P2 0x00000004 // UART Module 2 Power Control #define SYSCTL_PCUART_P1 0x00000002 // UART Module 1 Power Control #define SYSCTL_PCUART_P0 0x00000001 // UART Module 0 Power Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PCSSI register. // //***************************************************************************** #define SYSCTL_PCSSI_P3 0x00000008 // SSI Module 3 Power Control #define SYSCTL_PCSSI_P2 0x00000004 // SSI Module 2 Power Control #define SYSCTL_PCSSI_P1 0x00000002 // SSI Module 1 Power Control #define SYSCTL_PCSSI_P0 0x00000001 // SSI Module 0 Power Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PCI2C register. // //***************************************************************************** #define SYSCTL_PCI2C_P9 0x00000200 // I2C Module 9 Power Control #define SYSCTL_PCI2C_P8 0x00000100 // I2C Module 8 Power Control #define SYSCTL_PCI2C_P7 0x00000080 // I2C Module 7 Power Control #define SYSCTL_PCI2C_P6 0x00000040 // I2C Module 6 Power Control #define SYSCTL_PCI2C_P5 0x00000020 // I2C Module 5 Power Control #define SYSCTL_PCI2C_P4 0x00000010 // I2C Module 4 Power Control #define SYSCTL_PCI2C_P3 0x00000008 // I2C Module 3 Power Control #define SYSCTL_PCI2C_P2 0x00000004 // I2C Module 2 Power Control #define SYSCTL_PCI2C_P1 0x00000002 // I2C Module 1 Power Control #define SYSCTL_PCI2C_P0 0x00000001 // I2C Module 0 Power Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PCUSB register. // //***************************************************************************** #define SYSCTL_PCUSB_P0 0x00000001 // USB Module Power Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PCEPHY register. // //***************************************************************************** #define SYSCTL_PCEPHY_P0 0x00000001 // Ethernet PHY Module Power // Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PCCAN register. // //***************************************************************************** #define SYSCTL_PCCAN_P1 0x00000002 // CAN Module 1 Power Control #define SYSCTL_PCCAN_P0 0x00000001 // CAN Module 0 Power Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PCADC register. // //***************************************************************************** #define SYSCTL_PCADC_P1 0x00000002 // ADC Module 1 Power Control #define SYSCTL_PCADC_P0 0x00000001 // ADC Module 0 Power Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PCACMP register. // //***************************************************************************** #define SYSCTL_PCACMP_P0 0x00000001 // Analog Comparator Module 0 Power // Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PCPWM register. // //***************************************************************************** #define SYSCTL_PCPWM_P0 0x00000001 // PWM Module 0 Power Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PCQEI register. // //***************************************************************************** #define SYSCTL_PCQEI_P0 0x00000001 // QEI Module 0 Power Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PCEEPROM // register. // //***************************************************************************** #define SYSCTL_PCEEPROM_P0 0x00000001 // EEPROM Module 0 Power Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PCCCM register. // //***************************************************************************** #define SYSCTL_PCCCM_P0 0x00000001 // CRC and Cryptographic Modules // Power Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PCLCD register. // //***************************************************************************** #define SYSCTL_PCLCD_P0 0x00000001 // LCD Controller Module 0 Power // Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PCOWIRE register. // //***************************************************************************** #define SYSCTL_PCOWIRE_P0 0x00000001 // 1-Wire Module 0 Power Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PCEMAC register. // //***************************************************************************** #define SYSCTL_PCEMAC_P0 0x00000001 // Ethernet MAC Module 0 Power // Control //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PRWD register. // //***************************************************************************** #define SYSCTL_PRWD_R1 0x00000002 // Watchdog Timer 1 Peripheral // Ready #define SYSCTL_PRWD_R0 0x00000001 // Watchdog Timer 0 Peripheral // Ready //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PRTIMER register. // //***************************************************************************** #define SYSCTL_PRTIMER_R7 0x00000080 // 16/32-Bit General-Purpose Timer // 7 Peripheral Ready #define SYSCTL_PRTIMER_R6 0x00000040 // 16/32-Bit General-Purpose Timer // 6 Peripheral Ready #define SYSCTL_PRTIMER_R5 0x00000020 // 16/32-Bit General-Purpose Timer // 5 Peripheral Ready #define SYSCTL_PRTIMER_R4 0x00000010 // 16/32-Bit General-Purpose Timer // 4 Peripheral Ready #define SYSCTL_PRTIMER_R3 0x00000008 // 16/32-Bit General-Purpose Timer // 3 Peripheral Ready #define SYSCTL_PRTIMER_R2 0x00000004 // 16/32-Bit General-Purpose Timer // 2 Peripheral Ready #define SYSCTL_PRTIMER_R1 0x00000002 // 16/32-Bit General-Purpose Timer // 1 Peripheral Ready #define SYSCTL_PRTIMER_R0 0x00000001 // 16/32-Bit General-Purpose Timer // 0 Peripheral Ready //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PRGPIO register. // //***************************************************************************** #define SYSCTL_PRGPIO_R17 0x00020000 // GPIO Port T Peripheral Ready #define SYSCTL_PRGPIO_R16 0x00010000 // GPIO Port S Peripheral Ready #define SYSCTL_PRGPIO_R15 0x00008000 // GPIO Port R Peripheral Ready #define SYSCTL_PRGPIO_R14 0x00004000 // GPIO Port Q Peripheral Ready #define SYSCTL_PRGPIO_R13 0x00002000 // GPIO Port P Peripheral Ready #define SYSCTL_PRGPIO_R12 0x00001000 // GPIO Port N Peripheral Ready #define SYSCTL_PRGPIO_R11 0x00000800 // GPIO Port M Peripheral Ready #define SYSCTL_PRGPIO_R10 0x00000400 // GPIO Port L Peripheral Ready #define SYSCTL_PRGPIO_R9 0x00000200 // GPIO Port K Peripheral Ready #define SYSCTL_PRGPIO_R8 0x00000100 // GPIO Port J Peripheral Ready #define SYSCTL_PRGPIO_R7 0x00000080 // GPIO Port H Peripheral Ready #define SYSCTL_PRGPIO_R6 0x00000040 // GPIO Port G Peripheral Ready #define SYSCTL_PRGPIO_R5 0x00000020 // GPIO Port F Peripheral Ready #define SYSCTL_PRGPIO_R4 0x00000010 // GPIO Port E Peripheral Ready #define SYSCTL_PRGPIO_R3 0x00000008 // GPIO Port D Peripheral Ready #define SYSCTL_PRGPIO_R2 0x00000004 // GPIO Port C Peripheral Ready #define SYSCTL_PRGPIO_R1 0x00000002 // GPIO Port B Peripheral Ready #define SYSCTL_PRGPIO_R0 0x00000001 // GPIO Port A Peripheral Ready //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PRDMA register. // //***************************************************************************** #define SYSCTL_PRDMA_R0 0x00000001 // uDMA Module Peripheral Ready //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PREPI register. // //***************************************************************************** #define SYSCTL_PREPI_R0 0x00000001 // EPI Module Peripheral Ready //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PRHIB register. // //***************************************************************************** #define SYSCTL_PRHIB_R0 0x00000001 // Hibernation Module Peripheral // Ready //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PRUART register. // //***************************************************************************** #define SYSCTL_PRUART_R7 0x00000080 // UART Module 7 Peripheral Ready #define SYSCTL_PRUART_R6 0x00000040 // UART Module 6 Peripheral Ready #define SYSCTL_PRUART_R5 0x00000020 // UART Module 5 Peripheral Ready #define SYSCTL_PRUART_R4 0x00000010 // UART Module 4 Peripheral Ready #define SYSCTL_PRUART_R3 0x00000008 // UART Module 3 Peripheral Ready #define SYSCTL_PRUART_R2 0x00000004 // UART Module 2 Peripheral Ready #define SYSCTL_PRUART_R1 0x00000002 // UART Module 1 Peripheral Ready #define SYSCTL_PRUART_R0 0x00000001 // UART Module 0 Peripheral Ready //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PRSSI register. // //***************************************************************************** #define SYSCTL_PRSSI_R3 0x00000008 // SSI Module 3 Peripheral Ready #define SYSCTL_PRSSI_R2 0x00000004 // SSI Module 2 Peripheral Ready #define SYSCTL_PRSSI_R1 0x00000002 // SSI Module 1 Peripheral Ready #define SYSCTL_PRSSI_R0 0x00000001 // SSI Module 0 Peripheral Ready //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PRI2C register. // //***************************************************************************** #define SYSCTL_PRI2C_R9 0x00000200 // I2C Module 9 Peripheral Ready #define SYSCTL_PRI2C_R8 0x00000100 // I2C Module 8 Peripheral Ready #define SYSCTL_PRI2C_R7 0x00000080 // I2C Module 7 Peripheral Ready #define SYSCTL_PRI2C_R6 0x00000040 // I2C Module 6 Peripheral Ready #define SYSCTL_PRI2C_R5 0x00000020 // I2C Module 5 Peripheral Ready #define SYSCTL_PRI2C_R4 0x00000010 // I2C Module 4 Peripheral Ready #define SYSCTL_PRI2C_R3 0x00000008 // I2C Module 3 Peripheral Ready #define SYSCTL_PRI2C_R2 0x00000004 // I2C Module 2 Peripheral Ready #define SYSCTL_PRI2C_R1 0x00000002 // I2C Module 1 Peripheral Ready #define SYSCTL_PRI2C_R0 0x00000001 // I2C Module 0 Peripheral Ready //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PRUSB register. // //***************************************************************************** #define SYSCTL_PRUSB_R0 0x00000001 // USB Module Peripheral Ready //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PREPHY register. // //***************************************************************************** #define SYSCTL_PREPHY_R0 0x00000001 // Ethernet PHY Module Peripheral // Ready //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PRCAN register. // //***************************************************************************** #define SYSCTL_PRCAN_R1 0x00000002 // CAN Module 1 Peripheral Ready #define SYSCTL_PRCAN_R0 0x00000001 // CAN Module 0 Peripheral Ready //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PRADC register. // //***************************************************************************** #define SYSCTL_PRADC_R1 0x00000002 // ADC Module 1 Peripheral Ready #define SYSCTL_PRADC_R0 0x00000001 // ADC Module 0 Peripheral Ready //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PRACMP register. // //***************************************************************************** #define SYSCTL_PRACMP_R0 0x00000001 // Analog Comparator Module 0 // Peripheral Ready //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PRPWM register. // //***************************************************************************** #define SYSCTL_PRPWM_R1 0x00000002 // PWM Module 1 Peripheral Ready #define SYSCTL_PRPWM_R0 0x00000001 // PWM Module 0 Peripheral Ready //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PRQEI register. // //***************************************************************************** #define SYSCTL_PRQEI_R1 0x00000002 // QEI Module 1 Peripheral Ready #define SYSCTL_PRQEI_R0 0x00000001 // QEI Module 0 Peripheral Ready //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PREEPROM // register. // //***************************************************************************** #define SYSCTL_PREEPROM_R0 0x00000001 // EEPROM Module Peripheral Ready //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PRWTIMER // register. // //***************************************************************************** #define SYSCTL_PRWTIMER_R5 0x00000020 // 32/64-Bit Wide General-Purpose // Timer 5 Peripheral Ready #define SYSCTL_PRWTIMER_R4 0x00000010 // 32/64-Bit Wide General-Purpose // Timer 4 Peripheral Ready #define SYSCTL_PRWTIMER_R3 0x00000008 // 32/64-Bit Wide General-Purpose // Timer 3 Peripheral Ready #define SYSCTL_PRWTIMER_R2 0x00000004 // 32/64-Bit Wide General-Purpose // Timer 2 Peripheral Ready #define SYSCTL_PRWTIMER_R1 0x00000002 // 32/64-Bit Wide General-Purpose // Timer 1 Peripheral Ready #define SYSCTL_PRWTIMER_R0 0x00000001 // 32/64-Bit Wide General-Purpose // Timer 0 Peripheral Ready //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PRCCM register. // //***************************************************************************** #define SYSCTL_PRCCM_R0 0x00000001 // CRC and Cryptographic Modules // Peripheral Ready //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PRLCD register. // //***************************************************************************** #define SYSCTL_PRLCD_R0 0x00000001 // LCD Controller Module 0 // Peripheral Ready //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PROWIRE register. // //***************************************************************************** #define SYSCTL_PROWIRE_R0 0x00000001 // 1-Wire Module 0 Peripheral Ready //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_PREMAC register. // //***************************************************************************** #define SYSCTL_PREMAC_R0 0x00000001 // Ethernet MAC Module 0 Peripheral // Ready //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_UNIQUEID0 // register. // //***************************************************************************** #define SYSCTL_UNIQUEID0_ID_M 0xFFFFFFFF // Unique ID #define SYSCTL_UNIQUEID0_ID_S 0 //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_UNIQUEID1 // register. // //***************************************************************************** #define SYSCTL_UNIQUEID1_ID_M 0xFFFFFFFF // Unique ID #define SYSCTL_UNIQUEID1_ID_S 0 //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_UNIQUEID2 // register. // //***************************************************************************** #define SYSCTL_UNIQUEID2_ID_M 0xFFFFFFFF // Unique ID #define SYSCTL_UNIQUEID2_ID_S 0 //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_UNIQUEID3 // register. // //***************************************************************************** #define SYSCTL_UNIQUEID3_ID_M 0xFFFFFFFF // Unique ID #define SYSCTL_UNIQUEID3_ID_S 0 //***************************************************************************** // // The following are defines for the bit fields in the SYSCTL_CCMCGREQ // register. // //***************************************************************************** #define SYSCTL_CCMCGREQ_DESCFG 0x00000004 // DES Clock Gating Request #define SYSCTL_CCMCGREQ_AESCFG 0x00000002 // AES Clock Gating Request #define SYSCTL_CCMCGREQ_SHACFG 0x00000001 // SHA/MD5 Clock Gating Request //***************************************************************************** // // The following definitions are deprecated. // //***************************************************************************** #ifndef DEPRECATED //***************************************************************************** // // The following are deprecated defines for the bit fields in the SYSCTL_DID0 // register. // //***************************************************************************** #define SYSCTL_DID0_CLASS_BLIZZARD \ 0x00050000 // Tiva(TM) C Series TM4C123-class // microcontrollers #define SYSCTL_DID0_CLASS_SNOWFLAKE \ 0x000A0000 // Tiva(TM) C Series TM4C129-class // microcontrollers //***************************************************************************** // // The following are deprecated defines for the bit fields in the SYSCTL_RESC // register. // //***************************************************************************** #define SYSCTL_RESC_HIB 0x00000040 // HIB Reset //***************************************************************************** // // The following are deprecated defines for the bit fields in the SYSCTL_PWRTC // register. // //***************************************************************************** #define SYSCTL_PWRTC_VDDA_UBOR0 0x00000010 // VDDA Under BOR0 Status #define SYSCTL_PWRTC_VDD_UBOR0 0x00000001 // VDD Under BOR0 Status #endif #endif // __HW_SYSCTL_H__