menu "Hardware Drivers Config"

    menu "On-chip Peripheral Drivers"
        source "$BSP_DIR/../libraries/m460/rtt_port/Kconfig"
    endmenu

    menu "On-board Peripheral Drivers"

        config BSP_USING_NULINKME
            bool "Enable UART0 for RTT Console(uart0)"
            select BSP_USING_UART
            select BSP_USING_UART0
            default y

        config BOARD_USING_RTL8201FI
            bool "Enable Ethernet phy supporting(over emac/mdio)"
            select BSP_USING_EMAC
            default n

        config BOARD_USING_NAU8822
            bool "NAU8822 Audio Codec supporting(over i2s0, i2c2)"
            select NU_PKG_USING_NAU8822
            select BSP_USING_I2C2
            select BSP_USING_I2S
            select BSP_USING_I2S0
            default n

        config BOARD_USING_STORAGE_SDCARD
            bool "SDCARD supporting(over sdh0)"
            select BSP_USING_SDH
            select BSP_USING_SDH0
            default n

        config BOARD_USING_STORAGE_SPIFLASH
            bool "SPIFLASH supporting(over qspi0)"
            select BSP_USING_QSPI
            select BSP_USING_QSPI0
            default y

        config BOARD_USING_CANFD0
            bool "CAN-FD supporting(over canfd0)"
            select BSP_USING_CANFD
            select BSP_USING_CANFD0
            default y

        config BOARD_USING_EXTERNAL_HYPERRAM
            bool "External HyperRAM supporting(over hbi)"
            select BSP_USING_HBI
            default y

        if BOARD_USING_EXTERNAL_HYPERRAM
            config BOARD_USING_HYPERRAM_SIZE
                int "How many HyperRAM capacity in bytes"
                range 8388608 33554432
                default 8388608
        endif

        config BOARD_USING_NCT7717U
            bool "Thermal Sensor(over i2c2)"
            select NU_PKG_USING_NCT7717U
            select BSP_USING_I2C
            select BSP_USING_I2C2
            default y

        config BOARD_USING_USB_D_H
            bool "Enable USB Device or Host function"
            help
                Choose this option if you need USB function.

        if BOARD_USING_USB_D_H
            choice
                prompt "Select FS/HS USB Ports"

                config BOARD_USING_HSUSBD
                    select BSP_USING_HSUSBD
                    bool "Enable HSUSBD(over USB2.0)"
                    help
                        Choose this option if you need HSUSBD function mode.

                config BOARD_USING_HSUSBD_USBH
                    select BSP_USING_USBH
                    select BSP_USING_HSUSBD
                    bool "Enable HSUSBD(over USB2.0) and USBH(over USB1.1)"
                    help
                        Choose this option if you need HSUSBD and USBH function mode at the same time.

                config BOARD_USING_HSUSBH
                    select BSP_USING_HSUSBH
                    bool "Enable HSUSBH(over USB2.0)"
                    help
                        Choose this option if you need HSUSBH function mode.

                config BOARD_USING_HSUSBH_USBD
                    select BSP_USING_HSUSBH
                    select BSP_USING_USBD
                    bool "Enable HSUSBH(over USB2.0) and USBD(over USB1.1)"
                    help
                        Choose this option if you need HSUSBH and USBD function mode at the same time.

                config BOARD_USING_HSOTG
                    select BSP_USING_HSOTG
                    bool "Enable HSOTG(over USB2.0)"
                    help
                        Choose this option if you need HSOTG function mode.
            endchoice
        endif

    endmenu

    menu "Board extended module drivers"

    config BOARD_USING_LCD_SSD1963
        bool "LCD SSD1963(over ebi0)"
        select NU_PKG_USING_SSD1963
        select NU_PKG_USING_SSD1963_EBI
        select NU_PKG_SSD1963_WITH_OFFSCREEN_FRAMEBUFFER
        default n

    if BOARD_USING_LCD_SSD1963

        config BOARD_USING_SSD1963_EBI_PORT
        int "Specify EBI port index"
        range 0 2
        default 0

        config BOARD_USING_SSD1963_PIN_BACKLIGHT
        int "Specify the pin index of backlight pin index"
            range 0 127
            default 101

        config BOARD_USING_SSD1963_PIN_RESET
        int "Specify the pin index of reset pin index"
            range 0 127
            default 103

        config BOARD_USING_SSD1963_PIN_DC
        int "Specify the pin index of data&command switching"
            range 0 127
            default 119

        config BOARD_USING_SSD1963_PIN_DISPLAY
        int "Specify the pin index of display-on"
            range 0 127
            default 104

    endif

    config BOARD_USING_ILI2130
        bool "TPC ILI2130(over i2c1)"
        select BSP_USING_I2C1
        select NU_PKG_USING_TPC
        select NU_PKG_USING_TPC_ILI
        default n

    config BOARD_USING_LCD_FSA506
        bool "LCD FSA506(over ebi0)"
        select NU_PKG_USING_FSA506
        select NU_PKG_USING_FSA506_EBI
        select NU_PKG_FSA506_WITH_OFFSCREEN_FRAMEBUFFER
        default n

    if BOARD_USING_LCD_FSA506

        config BOARD_USING_FSA506_EBI_PORT
        int "Specify EBI port index"
        range 0 2
        default 0

        config BOARD_USING_FSA506_PIN_BACKLIGHT
        int "Specify the pin index of backlight pin index"
            range 0 127
            default 101

        config BOARD_USING_FSA506_PIN_RESET
        int "Specify the pin index of reset pin index"
            range 0 127
            default 103

        config BOARD_USING_FSA506_PIN_DC
        int "Specify the pin index of data&command switching"
            range 0 127
            default 119

        config BOARD_USING_FSA506_PIN_DISPLAY
        int "Specify the pin index of display-on"
            range 0 127
            default 104

    endif

    config BOARD_USING_ST1663I
        bool "TPC ST1663I(over i2c1)"
        select BSP_USING_I2C1
        select NU_PKG_USING_TPC
        select NU_PKG_USING_TPC_ST1663I
        default n

    config BOARD_USING_SENSOR0
        bool "CCAP-SENSOR PORT0(over i2c0/PG11/PD12)"
        select BSP_USING_I2C
        select BSP_USING_I2C0
        select BSP_USING_CCAP
        select BSP_USING_CCAP0
        default n

    config BOARD_USING_SENSON0_ID
        int "Specify Sensor0 ID"
        default 0  if BOARD_USING_SENSOR0
        range 0 2
        help
            HM1055=0
            ADV728X=1

    endmenu

    source "$BSP_DIR/../libraries/nu_packages/Kconfig"

endmenu