//*****************************************************************************
//
// ssi.h - Prototypes for the Synchronous Serial Interface Driver.
//
// Copyright (c) 2005-2017 Texas Instruments Incorporated.  All rights reserved.
// Software License Agreement
//
//   Redistribution and use in source and binary forms, with or without
//   modification, are permitted provided that the following conditions
//   are met:
//
//   Redistributions of source code must retain the above copyright
//   notice, this list of conditions and the following disclaimer.
//
//   Redistributions in binary form must reproduce the above copyright
//   notice, this list of conditions and the following disclaimer in the
//   documentation and/or other materials provided with the
//   distribution.
//
//   Neither the name of Texas Instruments Incorporated nor the names of
//   its contributors may be used to endorse or promote products derived
//   from this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
//*****************************************************************************

#ifndef __DRIVERLIB_SSI_H__
#define __DRIVERLIB_SSI_H__

#include <stdint.h>
#include <stdbool.h>

//*****************************************************************************
//
// If building with a C++ compiler, make all of the definitions in this header
// have a C binding.
//
//*****************************************************************************
#ifdef __cplusplus
extern "C"
{
#endif

//*****************************************************************************
//
// Values that can be passed to SSIIntEnable, SSIIntDisable, and SSIIntClear
// as the ui32IntFlags parameter, and returned by SSIIntStatus.
//
//*****************************************************************************
#define SSI_TXEOT               0x00000040  // Transmit FIFO is empty
#define SSI_DMATX               0x00000020  // DMA Transmit complete
#define SSI_DMARX               0x00000010  // DMA Receive complete
#define SSI_TXFF                0x00000008  // TX FIFO half full or less
#define SSI_RXFF                0x00000004  // RX FIFO half full or more
#define SSI_RXTO                0x00000002  // RX timeout
#define SSI_RXOR                0x00000001  // RX overrun

//*****************************************************************************
//
// Values that can be passed to SSIConfigSetExpClk.
//
//*****************************************************************************
#define SSI_FRF_MOTO_MODE_0     0x00000000  // Moto fmt, polarity 0, phase 0
#define SSI_FRF_MOTO_MODE_1     0x00000002  // Moto fmt, polarity 0, phase 1
#define SSI_FRF_MOTO_MODE_2     0x00000001  // Moto fmt, polarity 1, phase 0
#define SSI_FRF_MOTO_MODE_3     0x00000003  // Moto fmt, polarity 1, phase 1
#define SSI_FRF_TI              0x00000010  // TI frame format

#define SSI_MODE_MASTER         0x00000000  // SSI master
#define SSI_MODE_SLAVE          0x00000001  // SSI slave

//*****************************************************************************
//
// Values that can be passed to SSIDMAEnable() and SSIDMADisable().
//
//*****************************************************************************
#define SSI_DMA_TX              0x00000002  // Enable DMA for transmit
#define SSI_DMA_RX              0x00000001  // Enable DMA for receive

//*****************************************************************************
//
// Values that can be passed to SSIClockSourceSet() or returned from
// SSIClockSourceGet().
//
//*****************************************************************************
#define SSI_CLOCK_SYSTEM        0x00000000
#define SSI_CLOCK_ALTCLK        0x00000005

//*****************************************************************************
//
// Values that can be passed to SSIAdvModeSet().
//
//*****************************************************************************
#define SSI_ADV_MODE_LEGACY     0x00000000
#define SSI_ADV_MODE_READ_WRITE 0x000001c0
#define SSI_ADV_MODE_WRITE      0x000000c0
#define SSI_ADV_MODE_BI_READ    0x00000140
#define SSI_ADV_MODE_BI_WRITE   0x00000040
#define SSI_ADV_MODE_QUAD_READ  0x00000180
#define SSI_ADV_MODE_QUAD_WRITE 0x00000080

//*****************************************************************************
//
// Prototypes for the APIs.
//
//*****************************************************************************
extern void SSIConfigSetExpClk(uint32_t ui32Base, uint32_t ui32SSIClk,
                               uint32_t ui32Protocol, uint32_t ui32Mode,
                               uint32_t ui32BitRate,
                               uint32_t ui32DataWidth);
extern void SSIDataGet(uint32_t ui32Base, uint32_t *pui32Data);
extern int32_t SSIDataGetNonBlocking(uint32_t ui32Base,
                                     uint32_t *pui32Data);
extern void SSIDataPut(uint32_t ui32Base, uint32_t ui32Data);
extern int32_t SSIDataPutNonBlocking(uint32_t ui32Base, uint32_t ui32Data);
extern void SSIDisable(uint32_t ui32Base);
extern void SSIEnable(uint32_t ui32Base);
extern void SSIIntClear(uint32_t ui32Base, uint32_t ui32IntFlags);
extern void SSIIntDisable(uint32_t ui32Base, uint32_t ui32IntFlags);
extern void SSIIntEnable(uint32_t ui32Base, uint32_t ui32IntFlags);
extern void SSIIntRegister(uint32_t ui32Base, void (*pfnHandler)(void));
extern uint32_t SSIIntStatus(uint32_t ui32Base, bool bMasked);
extern void SSIIntUnregister(uint32_t ui32Base);
extern void SSIDMAEnable(uint32_t ui32Base, uint32_t ui32DMAFlags);
extern void SSIDMADisable(uint32_t ui32Base, uint32_t ui32DMAFlags);
extern bool SSIBusy(uint32_t ui32Base);
extern void SSIClockSourceSet(uint32_t ui32Base, uint32_t ui32Source);
extern uint32_t SSIClockSourceGet(uint32_t ui32Base);
extern void SSIAdvModeSet(uint32_t ui32Base, uint32_t ui32Mode);
extern void SSIAdvDataPutFrameEnd(uint32_t ui32Base, uint32_t ui32Data);
extern int32_t SSIAdvDataPutFrameEndNonBlocking(uint32_t ui32Base,
        uint32_t ui32Data);
extern void SSIAdvFrameHoldEnable(uint32_t ui32Base);
extern void SSIAdvFrameHoldDisable(uint32_t ui32Base);

//*****************************************************************************
//
// Mark the end of the C bindings section for C++ compilers.
//
//*****************************************************************************
#ifdef __cplusplus
}
#endif

#endif // __DRIVERLIB_SSI_H__