/** @file system.c * @brief System Driver Source File * @date 29.May.2013 * @version 03.05.02 * * This file contains: * - API Functions * . * which are relevant for the System driver. */ /* (c) Texas Instruments 2009-2013, All rights reserved. */ /* USER CODE BEGIN (0) */ /* USER CODE END */ /* Include Files */ #include "system.h" #include "sys_selftest.h" #include "sys_pcr.h" #include "pinmux.h" /* USER CODE BEGIN (1) */ /* USER CODE END */ /** @fn void systemInit(void) * @brief Initializes System Driver * * This function initializes the System driver. * */ /* USER CODE BEGIN (2) */ /* USER CODE END */ void setupPLL(void) { /* USER CODE BEGIN (3) */ /* USER CODE END */ /** - Configure PLL control registers */ /** @b Initialize @b Pll1: */ /** - Setup pll control register 1: * - Setup reset on oscillator slip * - Setup bypass on pll slip * - setup Pll output clock divider to max before Lock * - Setup reset on oscillator fail * - Setup reference clock divider * - Setup Pll multiplier */ systemREG1->PLLCTL1 = 0x00000000U | 0x20000000U | ((0x1FU)<< 24U) | 0x00000000U | ((6U - 1U)<< 16U) | ((150U - 1U)<< 8U); /** - Setup pll control register 2 * - Enable/Disable frequency modulation * - Setup spreading rate * - Setup bandwidth adjustment * - Setup internal Pll output divider * - Setup spreading amount */ systemREG1->PLLCTL2 = 0x00000000U | (255U << 22U) | (7U << 12U) | ((2U - 1U)<< 9U) | 61U; /** @b Initialize @b Pll2: */ /** - Setup pll2 control register : * - setup Pll output clock divider to max before Lock * - Setup reference clock divider * - Setup internal Pll output divider * - Setup Pll multiplier */ systemREG2->PLLCTL3 = ((2U - 1U) << 29U) | ((0x1FU)<< 24U) | ((6U - 1U)<< 16U) | ((150U - 1U) << 8U); /** - Enable PLL(s) to start up or Lock */ systemREG1->CSDIS = 0x00000000U | 0x00000000U | 0x00000008U | 0x00000080U | 0x00000000U | 0x00000000U | 0x00000000U; } void trimLPO(void) { /* USER CODE BEGIN (4) */ /* USER CODE END */ /** @b Initialize Lpo: */ /** Load TRIM values from OTP if present else load user defined values */ if(LPO_TRIM_VALUE != 0xFFFFU) { systemREG1->LPOMONCTL = (1U << 24U) | LPO_TRIM_VALUE; } else { systemREG1->LPOMONCTL = (1U << 24U) | (16U << 8U) | 8U; } /* USER CODE BEGIN (5) */ /* USER CODE END */ } void setupFlash(void) { /* USER CODE BEGIN (6) */ /* USER CODE END */ /** - Setup flash read mode, address wait states and data wait states */ flashWREG->FRDCNTL = 0x00000000U | (3U << 8U) | (1U << 4U) | 1U; /** - Setup flash access wait states for bank 7 */ FSM_WR_ENA_HL = 0x5U; EEPROM_CONFIG_HL = 0x00000002U | (3U << 16U) ; /* USER CODE BEGIN (7) */ /* USER CODE END */ /** - Disable write access to flash state machine registers */ FSM_WR_ENA_HL = 0xAU; /** - Setup flash bank power modes */ flashWREG->FBFALLBACK = 0x00000000U | (SYS_ACTIVE << 14U) | (SYS_SLEEP << 12U) | (SYS_SLEEP << 10U) | (SYS_SLEEP << 8U) | (SYS_SLEEP << 6U) | (SYS_SLEEP << 4U) | (SYS_ACTIVE << 2U) | SYS_ACTIVE; /* USER CODE BEGIN (8) */ /* USER CODE END */ } void periphInit(void) { /* USER CODE BEGIN (9) */ /* USER CODE END */ /** - Disable Peripherals before peripheral powerup*/ systemREG1->CLKCNTL &= 0xFFFFFEFFU; /** - Release peripherals from reset and enable clocks to all peripherals */ /** - Power-up all peripherals */ pcrREG->PSPWRDWNCLR0 = 0xFFFFFFFFU; pcrREG->PSPWRDWNCLR1 = 0xFFFFFFFFU; pcrREG->PSPWRDWNCLR2 = 0xFFFFFFFFU; pcrREG->PSPWRDWNCLR3 = 0xFFFFFFFFU; /** - Enable Peripherals */ systemREG1->CLKCNTL |= 1U << 8U; /* USER CODE BEGIN (10) */ /* USER CODE END */ } void mapClocks(void) { /* USER CODE BEGIN (11) */ /* USER CODE END */ /** @b Initialize @b Clock @b Tree: */ /** - Disable / Enable clock domain */ systemREG1->CDDIS= (FALSE << 4U ) /* AVCLK 1 OFF */ |(TRUE << 5U ) /* AVCLK 2 OFF */ |(FALSE << 8U ) /* VCLK3 OFF */ |(FALSE << 9U ) /* VCLK4 OFF */ |(FALSE << 10U) /* AVCLK 3 OFF */ |(FALSE << 11U); /* AVCLK 4 OFF */ /* Work Around for Errata SYS#46: * * Errata Description: * Clock Source Switching Not Qualified with Clock Source Enable And Clock Source Valid * Workaround: * Always check the CSDIS register to make sure the clock source is turned on and check * the CSVSTAT register to make sure the clock source is valid. Then write to GHVSRC to switch the clock. */ /** - Wait for until clocks are locked */ while ((systemREG1->CSVSTAT & ((systemREG1->CSDIS ^ 0xFFU) & 0xFFU)) != ((systemREG1->CSDIS ^ 0xFFU) & 0xFFU)) { } /* Wait */ /* USER CODE BEGIN (12) */ /* USER CODE END */ /* Now the PLLs are locked and the PLL outputs can be sped up */ /* The R-divider was programmed to be 0xF. Now this divider is changed to programmed value */ systemREG1->PLLCTL1 = (systemREG1->PLLCTL1 & 0xE0FFFFFFU)|((1U - 1U)<< 24U); systemREG2->PLLCTL3 = (systemREG2->PLLCTL3 & 0xE0FFFFFFU)|((1U - 1U)<< 24U); /** - Map device clock domains to desired sources and configure top-level dividers */ /** - All clock domains are working off the default clock sources until now */ /** - The below assignments can be easily modified using the HALCoGen GUI */ /** - Setup GCLK, HCLK and VCLK clock source for normal operation, power down mode and after wakeup */ systemREG1->GHVSRC = (SYS_PLL1 << 24U) | (SYS_PLL1 << 16U) | SYS_PLL1; /** - Setup synchronous peripheral clock dividers for VCLK1, VCLK2, VCLK3 */ systemREG1->CLKCNTL = (systemREG1->CLKCNTL & 0xF0F0FFFFU) | (1U << 24U) | (1U << 16U); systemREG2->CLK2CNTL = (systemREG2->CLK2CNTL & 0xFFFFF0F0U) | (1U) << 8U | (1U); /* USER CODE BEGIN (13) */ /* USER CODE END */ /** - Setup RTICLK1 and RTICLK2 clocks */ systemREG1->RCLKSRC = (1U << 24U) | (SYS_VCLK << 16U) | (1U << 8U) | SYS_VCLK; /** - Setup asynchronous peripheral clock sources for AVCLK1 and AVCLK2 */ systemREG1->VCLKASRC = (SYS_VCLK << 8U) | SYS_VCLK; systemREG2->VCLKACON1 = ((1U - 1U ) << 24U) | (0U << 20U) | (SYS_VCLK << 16U) | ((1U - 1U ) << 8U) | (0U << 4U) | SYS_VCLK; /* USER CODE BEGIN (14) */ /* USER CODE END */ } void systemInit(void) { /* USER CODE BEGIN (15) */ /* USER CODE END */ /* Configure PLL control registers and enable PLLs. * The PLL takes (127 + 1024 * NR) oscillator cycles to acquire lock. * This initialization sequence performs all the tasks that are not * required to be done at full application speed while the PLL locks. */ setupPLL(); /* USER CODE BEGIN (16) */ /* USER CODE END */ /* Run eFuse controller start-up checks and start eFuse controller ECC self-test. * This includes a check for the eFuse controller error outputs to be stuck-at-zero. */ //efcCheck(); /* USER CODE BEGIN (17) */ /* USER CODE END */ /* Enable clocks to peripherals and release peripheral reset */ periphInit(); /* USER CODE BEGIN (18) */ /* USER CODE END */ /* Configure device-level multiplexing and I/O multiplexing */ //muxInit(); /* USER CODE BEGIN (19) */ /* USER CODE END */ #if 0 /* Wait for eFuse controller self-test to complete and check results */ if ((!checkefcSelfTest()) !=0U) /* eFuse controller ECC logic self-test failed */ { efcClass2Error(); /* device operation is not reliable */ } #endif /* USER CODE BEGIN (20) */ /* USER CODE END */ /** - Set up flash address and data wait states based on the target CPU clock frequency * The number of address and data wait states for the target CPU clock frequency are specified * in the specific part's datasheet. */ setupFlash(); /* USER CODE BEGIN (21) */ /* USER CODE END */ /** - Configure the LPO such that HF LPO is as close to 10MHz as possible */ trimLPO(); /* USER CODE BEGIN (23) */ /* USER CODE END */ /** - Wait for PLLs to start up and map clock domains to desired clock sources */ mapClocks(); /* USER CODE BEGIN (24) */ /* USER CODE END */ /** - set ECLK pins functional mode */ systemREG1->SYSPC1 = 0U; /** - set ECLK pins default output value */ systemREG1->SYSPC4 = 0U; /** - set ECLK pins output direction */ systemREG1->SYSPC2 = 1U; /** - set ECLK pins open drain enable */ systemREG1->SYSPC7 = 0U; /** - set ECLK pins pullup/pulldown enable */ systemREG1->SYSPC8 = 0U; /** - set ECLK pins pullup/pulldown select */ systemREG1->SYSPC9 = 1U; /** - Setup ECLK */ systemREG1->ECPCNTL = (0U << 24U) | (0U << 23U) | ((8U - 1U) & 0xFFFFU); /* USER CODE BEGIN (25) */ /* USER CODE END */ } void systemPowerDown(uint32 mode) { /* USER CODE BEGIN (26) */ /* USER CODE END */ /* Disable clock sources */ systemREG1->CSDISSET = mode & 0x000000FFU; /* Disable clock domains */ systemREG1->CDDIS = (mode >> 8U) & 0x00000FFFU; /* Idle CPU */ /*SAFETYMCUSW 88 S MR:2.1 "Assembly in C needed" */ asm(" wfi"); /* USER CODE BEGIN (27) */ /* USER CODE END */ } /* USER CODE BEGIN (28) */ /* USER CODE END */ /** @fn void systemGetConfigValue(system_config_reg_t *config_reg, config_value_type_t type) * @brief Get the initial or current values of the configuration registers * * @param[in] *config_reg: pointer to the struct to which the initial or current value of the configuration registers need to be stored * @param[in] type: whether initial or current value of the configuration registers need to be stored * - InitialValue: initial value of the configuration registers will be stored in the struct pointed by config_reg * - CurrentValue: initial value of the configuration registers will be stored in the struct pointed by config_reg * * This function will copy the initial or current value (depending on the parameter 'type') of the configuration registers to the struct pointed by config_reg * */ void systemGetConfigValue(system_config_reg_t *config_reg, config_value_type_t type) { if (type == InitialValue) { config_reg->CONFIG_SYSPC1 = SYS_SYSPC1_CONFIGVALUE; config_reg->CONFIG_SYSPC2 = SYS_SYSPC2_CONFIGVALUE; config_reg->CONFIG_SYSPC7 = SYS_SYSPC7_CONFIGVALUE; config_reg->CONFIG_SYSPC8 = SYS_SYSPC8_CONFIGVALUE; config_reg->CONFIG_SYSPC9 = SYS_SYSPC9_CONFIGVALUE; config_reg->CONFIG_CSDIS = SYS_CSDIS_CONFIGVALUE; config_reg->CONFIG_CDDIS = SYS_CDDIS_CONFIGVALUE; config_reg->CONFIG_GHVSRC = SYS_GHVSRC_CONFIGVALUE; config_reg->CONFIG_VCLKASRC = SYS_VCLKASRC_CONFIGVALUE; config_reg->CONFIG_RCLKSRC = SYS_RCLKSRC_CONFIGVALUE; config_reg->CONFIG_MSTGCR = SYS_MSTGCR_CONFIGVALUE; config_reg->CONFIG_MINITGCR = SYS_MINITGCR_CONFIGVALUE; config_reg->CONFIG_MSINENA = SYS_MSINENA_CONFIGVALUE; config_reg->CONFIG_PLLCTL1 = SYS_PLLCTL1_CONFIGVALUE_2; config_reg->CONFIG_PLLCTL2 = SYS_PLLCTL2_CONFIGVALUE; config_reg->CONFIG_UERFLAG = SYS_UERFLAG_CONFIGVALUE; if(LPO_TRIM_VALUE != 0xFFFFU) { config_reg->CONFIG_LPOMONCTL = SYS_LPOMONCTL_CONFIGVALUE_1; } else { config_reg->CONFIG_LPOMONCTL = SYS_LPOMONCTL_CONFIGVALUE_2; } config_reg->CONFIG_CLKTEST = SYS_CLKTEST_CONFIGVALUE; config_reg->CONFIG_DFTCTRLREG1 = SYS_DFTCTRLREG1_CONFIGVALUE; config_reg->CONFIG_DFTCTRLREG2 = SYS_DFTCTRLREG2_CONFIGVALUE; config_reg->CONFIG_GPREG1 = SYS_GPREG1_CONFIGVALUE; config_reg->CONFIG_RAMGCR = SYS_RAMGCR_CONFIGVALUE; config_reg->CONFIG_BMMCR1 = SYS_BMMCR1_CONFIGVALUE; config_reg->CONFIG_MMUGCR = SYS_MMUGCR_CONFIGVALUE; config_reg->CONFIG_CLKCNTL = SYS_CLKCNTL_CONFIGVALUE; config_reg->CONFIG_ECPCNTL = SYS_ECPCNTL_CONFIGVALUE; config_reg->CONFIG_DEVCR1 = SYS_DEVCR1_CONFIGVALUE; config_reg->CONFIG_SYSECR = SYS_SYSECR_CONFIGVALUE; config_reg->CONFIG_PLLCTL3 = SYS2_PLLCTL3_CONFIGVALUE_2; config_reg->CONFIG_STCCLKDIV = SYS2_STCCLKDIV_CONFIGVALUE; config_reg->CONFIG_CLK2CNTL = SYS2_CLK2CNTL_CONFIGVALUE; config_reg->CONFIG_VCLKACON1 = SYS2_VCLKACON1_CONFIGVALUE; config_reg->CONFIG_CLKSLIP = SYS2_CLKSLIP_CONFIGVALUE; config_reg->CONFIG_EFC_CTLEN = SYS2_EFC_CTLEN_CONFIGVALUE; } else { config_reg->CONFIG_SYSPC1 = systemREG1->SYSPC1; config_reg->CONFIG_SYSPC2 = systemREG1->SYSPC2; config_reg->CONFIG_SYSPC7 = systemREG1->SYSPC7; config_reg->CONFIG_SYSPC8 = systemREG1->SYSPC8; config_reg->CONFIG_SYSPC9 = systemREG1->SYSPC9; config_reg->CONFIG_CSDIS = systemREG1->CSDIS; config_reg->CONFIG_CDDIS = systemREG1->CDDIS; config_reg->CONFIG_GHVSRC = systemREG1->GHVSRC; config_reg->CONFIG_VCLKASRC = systemREG1->VCLKASRC; config_reg->CONFIG_RCLKSRC = systemREG1->RCLKSRC; config_reg->CONFIG_MSTGCR = systemREG1->MSTGCR; config_reg->CONFIG_MINITGCR = systemREG1->MINITGCR; config_reg->CONFIG_MSINENA = systemREG1->MSINENA; config_reg->CONFIG_PLLCTL1 = systemREG1->PLLCTL1; config_reg->CONFIG_PLLCTL2 = systemREG1->PLLCTL2; config_reg->CONFIG_UERFLAG = systemREG1->UERFLAG; config_reg->CONFIG_LPOMONCTL = systemREG1->LPOMONCTL; config_reg->CONFIG_CLKTEST = systemREG1->CLKTEST; config_reg->CONFIG_DFTCTRLREG1 = systemREG1->DFTCTRLREG1; config_reg->CONFIG_DFTCTRLREG2 = systemREG1->DFTCTRLREG2; config_reg->CONFIG_GPREG1 = systemREG1->GPREG1; config_reg->CONFIG_RAMGCR = systemREG1->RAMGCR; config_reg->CONFIG_BMMCR1 = systemREG1->BMMCR1; config_reg->CONFIG_MMUGCR = systemREG1->MMUGCR; config_reg->CONFIG_CLKCNTL = systemREG1->CLKCNTL; config_reg->CONFIG_ECPCNTL = systemREG1->ECPCNTL; config_reg->CONFIG_DEVCR1 = systemREG1->DEVCR1; config_reg->CONFIG_SYSECR = systemREG1->SYSECR; config_reg->CONFIG_PLLCTL3 = systemREG2->PLLCTL3; config_reg->CONFIG_STCCLKDIV = systemREG2->STCCLKDIV; config_reg->CONFIG_CLK2CNTL = systemREG2->CLK2CNTL; config_reg->CONFIG_VCLKACON1 = systemREG2->VCLKACON1; config_reg->CONFIG_CLKSLIP = systemREG2->CLKSLIP; config_reg->CONFIG_EFC_CTLEN = systemREG2->EFC_CTLEN; } } /** @fn void tcmflashGetConfigValue(tcmflash_config_reg_t *config_reg, config_value_type_t type) * @brief Get the initial or current values of the configuration registers * * @param[in] *config_reg: pointer to the struct to which the initial or current value of the configuration registers need to be stored * @param[in] type: whether initial or current value of the configuration registers need to be stored * - InitialValue: initial value of the configuration registers will be stored in the struct pointed by config_reg * - CurrentValue: initial value of the configuration registers will be stored in the struct pointed by config_reg * * This function will copy the initial or current value (depending on the parameter 'type') of the configuration registers to the struct pointed by config_reg * */ void tcmflashGetConfigValue(tcmflash_config_reg_t *config_reg, config_value_type_t type) { if (type == InitialValue) { config_reg-> CONFIG_FRDCNTL = TCMFLASH_FRDCNTL_CONFIGVALUE; config_reg-> CONFIG_FEDACCTRL1 = TCMFLASH_FEDACCTRL1_CONFIGVALUE; config_reg-> CONFIG_FEDACCTRL2 = TCMFLASH_FEDACCTRL2_CONFIGVALUE; config_reg-> CONFIG_FEDACSDIS = TCMFLASH_FEDACSDIS_CONFIGVALUE; config_reg-> CONFIG_FBPROT = TCMFLASH_FBPROT_CONFIGVALUE; config_reg-> CONFIG_FBSE = TCMFLASH_FBSE_CONFIGVALUE; config_reg-> CONFIG_FBAC = TCMFLASH_FBAC_CONFIGVALUE; config_reg-> CONFIG_FBFALLBACK = TCMFLASH_FBFALLBACK_CONFIGVALUE; config_reg-> CONFIG_FPAC1 = TCMFLASH_FPAC1_CONFIGVALUE; config_reg-> CONFIG_FPAC2 = TCMFLASH_FPAC2_CONFIGVALUE; config_reg-> CONFIG_FMAC = TCMFLASH_FMAC_CONFIGVALUE; config_reg-> CONFIG_FLOCK = TCMFLASH_FLOCK_CONFIGVALUE; config_reg-> CONFIG_FDIAGCTRL = TCMFLASH_FDIAGCTRL_CONFIGVALUE; config_reg-> CONFIG_FEDACSDIS2 = TCMFLASH_FEDACSDIS2_CONFIGVALUE; } else { config_reg-> CONFIG_FRDCNTL = flashWREG->FRDCNTL; config_reg-> CONFIG_FEDACCTRL1 = flashWREG->FEDACCTRL1; config_reg-> CONFIG_FEDACCTRL2 = flashWREG->FEDACCTRL2; config_reg-> CONFIG_FEDACSDIS = flashWREG->FEDACSDIS; config_reg-> CONFIG_FBPROT = flashWREG->FBPROT; config_reg-> CONFIG_FBSE = flashWREG->FBSE; config_reg-> CONFIG_FBAC = flashWREG->FBAC; config_reg-> CONFIG_FBFALLBACK = flashWREG->FBFALLBACK; config_reg-> CONFIG_FPAC1 = flashWREG->FPAC1; config_reg-> CONFIG_FPAC2 = flashWREG->FPAC2; config_reg-> CONFIG_FMAC = flashWREG->FMAC; config_reg-> CONFIG_FLOCK = flashWREG->FLOCK; config_reg-> CONFIG_FDIAGCTRL = flashWREG->FDIAGCTRL; config_reg-> CONFIG_FEDACSDIS2 = flashWREG->FEDACSDIS2; } } /** @fn void sramGetConfigValue(sram_config_reg_t *config_reg, config_value_type_t type) * @brief Get the initial or current values of the configuration registers * * @param[in] *config_reg: pointer to the struct to which the initial or current value of the configuration registers need to be stored * @param[in] type: whether initial or current value of the configuration registers need to be stored * - InitialValue: initial value of the configuration registers will be stored in the struct pointed by config_reg * - CurrentValue: initial value of the configuration registers will be stored in the struct pointed by config_reg * * This function will copy the initial or current value (depending on the parameter 'type') of the configuration registers to the struct pointed by config_reg * */ void sramGetConfigValue(sram_config_reg_t *config_reg, config_value_type_t type) { if (type == InitialValue) { config_reg->CONFIG_RAMCTRL[0U] = SRAM_RAMCTRL_CONFIGVALUE; config_reg->CONFIG_RAMTHRESHOLD[0U] = SRAM_RAMTHRESHOLD_CONFIGVALUE; config_reg->CONFIG_RAMINTCTRL[0U] = SRAM_RAMINTCTRL_CONFIGVALUE; config_reg->CONFIG_RAMTEST[0U] = SRAM_RAMTEST_CONFIGVALUE; config_reg->CONFIG_RAMADDRDECVECT[0U] = SRAM_RAMADDRDECVECT_CONFIGVALUE; config_reg->CONFIG_RAMCTRL[1U] = SRAM_RAMCTRL_CONFIGVALUE; config_reg->CONFIG_RAMTHRESHOLD[1U] = SRAM_RAMTHRESHOLD_CONFIGVALUE; config_reg->CONFIG_RAMINTCTRL[1U] = SRAM_RAMINTCTRL_CONFIGVALUE; config_reg->CONFIG_RAMTEST[1U] = SRAM_RAMTEST_CONFIGVALUE; config_reg->CONFIG_RAMADDRDECVECT[1U] = SRAM_RAMADDRDECVECT_CONFIGVALUE; } else { config_reg->CONFIG_RAMCTRL[0U] = tcram1REG->RAMCTRL; config_reg->CONFIG_RAMTHRESHOLD[0U] = tcram1REG->RAMTHRESHOLD; config_reg->CONFIG_RAMINTCTRL[0U] = tcram1REG->RAMINTCTRL; config_reg->CONFIG_RAMTEST[0U] = tcram1REG->RAMTEST; config_reg->CONFIG_RAMADDRDECVECT[0U] = tcram1REG->RAMADDRDECVECT; config_reg->CONFIG_RAMCTRL[1U] = tcram2REG->RAMCTRL; config_reg->CONFIG_RAMTHRESHOLD[1U] = tcram2REG->RAMTHRESHOLD; config_reg->CONFIG_RAMINTCTRL[1U] = tcram2REG->RAMINTCTRL; config_reg->CONFIG_RAMTEST[1U] = tcram2REG->RAMTEST; config_reg->CONFIG_RAMADDRDECVECT[1U] = tcram2REG->RAMADDRDECVECT; } }