update kconfig

add serialX hardware driver for bluetrum gd32 n32 nuc980 renesas

.github/workflows/action.yml

@@ -8,7 +8,7 @@ on:
     - cron:  '0 16 1 * *'
   push:
     branches:
-      - master
+      - serialX-dev
     paths-ignore:
       - documentation/**
       - '**/README.md'

bsp/bluetrum/libraries/hal_drivers/SConscript

@@ -12,7 +12,10 @@ if GetDepend('RT_USING_PIN'):
     src += ['drv_gpio.c']
 
 if GetDepend('RT_USING_SERIAL'):
-    src += ['drv_usart.c']
+    if GetDepend(['RT_USING_SERIAL_X']):
+        src += ['drv_usartX.c']
+    else:
+        src += ['drv_usart.c']
 
 if GetDepend('RT_USING_SDIO'):
     src += ['drv_sdio.c']

bsp/bluetrum/libraries/hal_drivers/drv_usartX.c

@@ -0,0 +1,348 @@
+/*
+ * Copyright (c) 2020-2022, Bluetrum Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author            Notes
+ * 2020-11-20     greedyhao         first version
+ * 2022-06-08     THEWON            first version for serialX
+ */
+
+#include "board.h"
+#include <drv_usartX.h>
+
+#ifdef RT_USING_SERIAL
+
+//#define DRV_DEBUG
+#define LOG_TAG             "drv.usart"
+#include <drv_log.h>
+
+enum
+{
+#ifdef BSP_USING_UART0
+    UART0_INDEX,
+#endif
+#ifdef BSP_USING_UART1
+    UART1_INDEX,
+#endif
+#ifdef BSP_USING_UART2
+    UART2_INDEX,
+#endif
+};
+
+static struct ab32_uart_config uart_config[] =
+{
+#ifdef BSP_USING_UART0
+    {
+        .name = "uart0",
+        .instance = UART0_BASE,
+        .mode = UART_MODE_TX_RX | UART_MODE_1LINE,
+    },
+#endif
+#ifdef BSP_USING_UART1
+    {
+        .name = "uart1",
+        .instance = UART1_BASE,
+        .mode = UART_MODE_TX_RX,
+    },
+#endif
+#ifdef BSP_USING_UART2
+    {
+        .name = "uart2",
+        .instance = UART2_BASE,
+        .mode = UART_MODE_TX_RX,
+    }
+#endif
+};
+
+static struct ab32_uart uart_obj[sizeof(uart_config) / sizeof(uart_config[0])] = {0};
+
+static rt_err_t ab32_init(struct rt_serial_device *serial)
+{
+    struct ab32_uart *uart;
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct ab32_uart, serial);
+    uart->handle.instance           = uart->uart_config->instance;
+    uart->handle.init.baud          = serial->config->baud_rate;
+    uart->handle.init.mode          = uart->uart_config->mode;
+
+    switch (serial->config->data_bits)
+    {
+    case DATA_BITS_8:
+        uart->handle.init.word_len  = UART_WORDLENGTH_8B;
+    break;
+    case DATA_BITS_9:
+        uart->handle.init.word_len  = UART_WORDLENGTH_9B;
+    break;
+    default:
+        uart->handle.init.word_len  = UART_WORDLENGTH_8B;
+    break;
+    }
+
+    switch (serial->config->stop_bits)
+    {
+    case STOP_BITS_1:
+        uart->handle.init.stop_bits = UART_STOPBITS_1;
+    break;
+    case STOP_BITS_2:
+        uart->handle.init.stop_bits = UART_STOPBITS_2;
+    break;
+    default:
+        uart->handle.init.stop_bits = UART_STOPBITS_1;
+    break;
+    }
+
+    hal_uart_init(&uart->handle);
+
+    return RT_EOK;
+}
+
+static rt_err_t ab32_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
+{
+    struct ab32_uart *uart;
+    RT_ASSERT(serial != RT_NULL);
+    RT_ASSERT(cfg != RT_NULL);
+
+    uart = rt_container_of(serial, struct ab32_uart, serial);
+    uart->handle.instance           = uart->uart_config->instance;
+    uart->handle.init.baud          = cfg->baud_rate;
+    uart->handle.init.mode          = uart->uart_config->mode;
+
+    switch (cfg->data_bits)
+    {
+    case DATA_BITS_8:
+        uart->handle.init.word_len  = UART_WORDLENGTH_8B;
+    break;
+    case DATA_BITS_9:
+        uart->handle.init.word_len  = UART_WORDLENGTH_9B;
+    break;
+    default:
+        uart->handle.init.word_len  = UART_WORDLENGTH_8B;
+    break;
+    }
+
+    switch (cfg->stop_bits)
+    {
+    case STOP_BITS_1:
+        uart->handle.init.stop_bits = UART_STOPBITS_1;
+    break;
+    case STOP_BITS_2:
+        uart->handle.init.stop_bits = UART_STOPBITS_2;
+    break;
+    default:
+        uart->handle.init.stop_bits = UART_STOPBITS_1;
+    break;
+    }
+
+    hal_uart_init(&uart->handle);
+
+    return RT_EOK;
+}
+
+static rt_err_t ab32_control(struct rt_serial_device *serial, int cmd, void *arg)
+{
+    struct ab32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+    uart = rt_container_of(serial, struct ab32_uart, serial);
+
+    switch (cmd)
+    {
+    case RT_DEVICE_CTRL_OPEN:
+        uart->intTxing = RT_FALSE;
+    break;
+    /* disable interrupt */
+    case RT_DEVICE_CTRL_CLR_INT:
+        hal_uart_control(uart->handle.instance, UART_RXIT_ENABLE, HAL_DISABLE);
+    break;
+    /* enable interrupt */
+    case RT_DEVICE_CTRL_SET_INT:
+        hal_uart_clrflag(uart->handle.instance, UART_FLAG_RXPND);
+        hal_uart_control(uart->handle.instance, UART_RXIT_ENABLE, HAL_ENABLE);
+    break;
+    case RT_DEVICE_CTRL_CLOSE:
+        hal_uart_deinit(uart->handle.instance);
+    break;
+    }
+
+    return RT_EOK;
+}
+
+static int ab32_putc(struct rt_serial_device *serial, char ch)
+{
+    struct ab32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct ab32_uart, serial);
+
+    hal_uart_write(uart->handle.instance, ch);
+
+    return 1;
+}
+
+static int ab32_getc(struct rt_serial_device *serial)
+{
+    int ch;
+    struct ab32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct ab32_uart, serial);
+
+    ch = -1;
+    if (hal_uart_getflag(UART0_BASE, UART_FLAG_RXPND)) {
+        ch = hal_uart_read(uart->handle.instance);
+        hal_uart_clrflag(UART0_BASE, UART_FLAG_RXPND);
+    }
+
+    return ch;
+}
+
+static int ab32_flush(struct rt_serial_device *serial)
+{
+    struct ab32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct ab32_uart, serial);
+    while(hal_uart_getflag(uart->handle.instance, UART_FLAG_TXPND) == 0);
+}
+
+rt_bool_t ab32_int_txing(struct rt_serial_device *serial)
+{
+    struct ab32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct ab32_uart, serial);
+
+    return uart->intTxing;
+}
+
+static void ab32_start_tx(struct rt_serial_device *serial, rt_uint8_t ch)
+{
+    struct ab32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct ab32_uart, serial);
+    uart->intTxing = RT_TRUE;
+    hal_uart_control(uart->handle.instance, UART_TXIT_ENABLE, HAL_ENABLE);
+    hal_uart_write(uart->handle.instance, ch);
+}
+
+static void ab32_stop_tx(struct rt_serial_device *serial)
+{
+    struct ab32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct ab32_uart, serial);
+    hal_uart_control(uart->handle.instance, UART_TXIT_ENABLE, HAL_DISABLE);
+    uart->intTxing = RT_FALSE;
+}
+
+RT_SECTION(".irq.usart")
+static void uart_isr(int vector, void *param)
+{
+    rt_interrupt_enter();
+
+#ifdef BSP_USING_UART0
+    if(hal_uart_getflag(UART0_BASE, UART_FLAG_RXPND))       //RX one byte finish
+    {
+        rt_hw_serial_isr(&(uart_obj[UART0_INDEX].serial), RT_SERIAL_EVENT_RX_IND);
+        hal_uart_clrflag(UART0_BASE, UART_FLAG_RXPND);
+    }
+    if(hal_uart_getflag(UART0_BASE, UART_FLAG_TXPND))       //TX one byte finish
+    {
+        rt_hw_serial_isr(&(uart_obj[UART0INDEX].serial), RT_SERIAL_EVENT_TX_DONE);
+        hal_uart_clrflag(UART0_BASE, UART_FLAG_TXPND);
+    }
+#endif
+#ifdef BSP_USING_UART1
+    if(hal_uart_getflag(UART1_BASE, UART_FLAG_RXPND))       //RX one byte finish
+    {
+        rt_hw_serial_isr(&(uart_obj[UART1_INDEX].serial), RT_SERIAL_EVENT_RX_IND);
+        hal_uart_clrflag(UART1_BASE, UART_FLAG_RXPND);
+    }
+    if(hal_uart_getflag(UART1_BASE, UART_FLAG_TXPND))       //TX one byte finish
+    {
+        rt_hw_serial_isr(&(uart_obj[UART1_INDEX].serial), RT_SERIAL_EVENT_TX_DONE);
+        hal_uart_clrflag(UART1_BASE, UART_FLAG_TXPND);
+    }
+#endif
+#ifdef BSP_USING_UART2
+    if(hal_uart_getflag(UART2_BASE, UART_FLAG_RXPND))       //RX one byte finish
+    {
+        rt_hw_serial_isr(&(uart_obj[UART2_INDEX].serial), RT_SERIAL_EVENT_RX_IND);
+        hal_uart_clrflag(UART2_BASE, UART_FLAG_RXPND);
+    }
+    if(hal_uart_getflag(UART2_BASE, UART_FLAG_TXPND))       //TX one byte finish
+    {
+        rt_hw_serial_isr(&(uart_obj[UART2_INDEX].serial), RT_SERIAL_EVENT_TX_DONE);
+        hal_uart_clrflag(UART2_BASE, UART_FLAG_TXPND);
+    }
+#endif
+
+    rt_interrupt_leave();
+}
+
+#ifdef HUART_ENABLE
+RT_SECTION(".irq.huart")
+void huart_timer_isr(void)
+{
+    huart_if_rx_ovflow();
+
+    if (0 == huart_get_rxcnt()) {
+        return;
+    }
+}
+#else
+RT_SECTION(".irq.huart")
+void huart_timer_isr(void)
+{
+}
+#endif
+
+static const struct rt_uart_ops ab32_uart_ops =
+{
+    .init = ab32_init,
+    .configure = ab32_configure,
+    .control = ab32_control,
+    .putc = ab32_putc,
+    .getc = ab32_getc,
+    .flush = ab32_flush,
+    .is_int_txing = ab32_int_txing,
+    .start_tx = ab32_start_tx,
+    .stop_tx = ab32_stop_tx,
+};
+
+int rt_hw_usart_init(void)
+{
+    rt_size_t obj_num = sizeof(uart_obj) / sizeof(struct ab32_uart);
+    rt_err_t result = 0;
+
+    rt_hw_interrupt_install(IRQ_UART0_2_VECTOR, uart_isr, RT_NULL, "ut_isr");
+
+    for (int i = 0; i < obj_num; i++)
+    {
+        /* init UART object */
+        uart_obj[i].uart_config     = &uart_config[i];
+        uart_obj[i].serial.ops      = &ab32_uart_ops;
+
+        /* register UART device */
+        result = rt_hw_serial_register(&uart_obj[i].serial, uart_obj[i].uart_config->name,
+                                       RT_DEVICE_FLAG_RDWR
+                                       | RT_DEVICE_FLAG_INT_RX
+                                       | RT_DEVICE_FLAG_INT_TX
+                                       , RT_NULL);
+        RT_ASSERT(result == RT_EOK);
+    }
+
+    return result;
+}
+
+#endif

bsp/bluetrum/libraries/hal_drivers/drv_usartX.h

@@ -0,0 +1,40 @@
+/*
+ * Copyright (c) 2020-2022, Bluetrum Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author            Notes
+ * 2020-11-20     greedyhao         first version
+ * 2022-06-08     THEWON            first version for serialX
+ */
+
+#ifndef DRV_USART_H__
+#define DRV_USART_H__
+
+#include "drv_common.h"
+
+#ifdef RT_USING_SERIAL
+
+/* an32 config class */
+struct ab32_uart_config
+{
+    const char *name;
+    hal_sfr_t   instance;
+    uint8_t     mode;
+};
+
+/* ab32 uart driver class */
+struct ab32_uart
+{
+    struct uart_handle handle;
+    struct rt_serial_device serial;
+    struct ab32_uart_config *uart_config;
+    rt_bool_t intTxing;
+};
+
+#endif
+
+int rt_hw_usart_init(void);
+
+#endif

bsp/gd32/arm/libraries/gd32_drivers/SConscript

@@ -14,7 +14,10 @@ if GetDepend('RT_USING_PIN'):
 
 # add usart drivers.
 if GetDepend(['RT_USING_SERIAL']):
-    src += ['drv_usart.c']
+    if GetDepend(['RT_USING_SERIAL_X']):
+        src += ['drv_usartX.c']
+    else:
+        src += ['drv_usart.c']
 
 # add i2c drivers.
 if GetDepend(['RT_USING_I2C', 'RT_USING_I2C_BITOPS']):

bsp/gd32/arm/libraries/gd32_drivers/drv_usartX.c

@@ -0,0 +1,848 @@
+/*
+ * Copyright (c) 2006-2021, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2009-01-05     Bernard      the first version
+ * 2010-03-29     Bernard      remove interrupt Tx and DMA Rx mode
+ * 2012-02-08     aozima       update for F4.
+ * 2012-07-28     aozima       update for ART board.
+ * 2016-05-28     armink       add DMA Rx mode
+ * 2022-06-09     THEWON       first version for serialX
+ */
+
+#include <gd32f4xx.h>
+#include <drv_usartX.h>
+#include <board.h>
+
+#ifdef RT_USING_SERIAL
+
+#if !defined(BSP_USING_UART0) && !defined(BSP_USING_UART1) && \
+    !defined(BSP_USING_UART2) && !defined(BSP_USING_UART3) && \
+    !defined(BSP_USING_UART4) && !defined(BSP_USING_UART5) && \
+    !defined(BSP_USING_UART6) && !defined(BSP_USING_UART7)
+#error "Please define at least one UARTx"
+
+#endif
+
+enum
+{
+#ifdef BSP_USING_UART0
+    UART0_INDEX,
+#endif
+#ifdef BSP_USING_UART1
+    UART1_INDEX,
+#endif
+#ifdef BSP_USING_UART2
+    UART2_INDEX,
+#endif
+#ifdef BSP_USING_UART3
+    UART3_INDEX,
+#endif
+#ifdef BSP_USING_UART4
+    UART4_INDEX,
+#endif
+#ifdef BSP_USING_UART5
+    UART5_INDEX,
+#endif
+#ifdef BSP_USING_UART6
+    UART6_INDEX,
+#endif
+#ifdef BSP_USING_UART7
+    UART7_INDEX,
+#endif
+};
+
+/* GD32 uart driver */
+
+static void uart_isr(struct rt_serial_device *serial);
+
+#ifdef RT_SERIAL_USING_DMA
+static void DMA_RX_Configuration(struct rt_serial_device *serial);
+static void DMA_TX_Configuration(struct rt_serial_device *serial);
+#endif
+
+static struct gd32_uart uarts[] = {
+    #ifdef BSP_USING_UART0
+    {
+        .uart_periph = USART0,                                 // uart peripheral index
+        .uart_config = {
+            .name = "uart0",
+            .irqn = USART0_IRQn,                            // uart iqrn
+            RCU_USART0, RCU_GPIOA, RCU_GPIOA,       // periph clock, tx gpio clock, rt gpio clock
+            GPIOA, GPIO_AF_7, GPIO_PIN_9,           // tx port, tx alternate, tx pin
+            GPIOA, GPIO_AF_7, GPIO_PIN_10,          // rx port, rx alternate, rx pin
+        },
+#ifdef RT_SERIAL_USING_DMA
+        .dmaTxing = RT_FALSE,
+        .dma_rx = {
+            .dma_periph = DMA1,
+            .dma_channel = DMA_CH2,
+            .dma_subperi = DMA_SUBPERI4,
+            .dma_irq = DMA1_Channel2_IRQn,
+        },
+        .dma_tx = {
+            .dma_periph = DMA1,
+            .dma_channel = DMA_CH7,
+            .dma_subperi = DMA_SUBPERI4,
+            .dma_irq = DMA1_Channel7_IRQn,
+        },
+#endif
+    },
+    #endif
+
+    #ifdef BSP_USING_UART1
+    {
+        .uart_periph = USART1,                                 // uart peripheral index
+        .uart_config = {
+            .name = "uart1",
+            .irqn = USART1_IRQn,                            // uart iqrn
+            RCU_USART1, RCU_GPIOA, RCU_GPIOA,       // periph clock, tx gpio clock, rt gpio clock
+            GPIOA, GPIO_AF_7, GPIO_PIN_2,           // tx port, tx alternate, tx pin
+            GPIOA, GPIO_AF_7, GPIO_PIN_3,           // rx port, rx alternate, rx pin
+        }
+    },
+    #endif
+
+    #ifdef BSP_USING_UART2
+    {
+        .uart_periph = USART2,                                 // uart peripheral index
+        .uart_config = {
+            .name = "uart2",
+            .irqn = USART2_IRQn,                            // uart iqrn
+            RCU_USART2, RCU_GPIOB, RCU_GPIOB,       // periph clock, tx gpio clock, rt gpio clock
+            GPIOB, GPIO_AF_7, GPIO_PIN_10,          // tx port, tx alternate, tx pin
+            GPIOB, GPIO_AF_7, GPIO_PIN_11,          // rx port, rx alternate, rx pin
+        }
+    },
+    #endif
+
+    #ifdef BSP_USING_UART3
+    {
+        .uart_periph = UART3,                                 // uart peripheral index
+        .uart_config = {
+            .name = "uart3",
+            .irqn = UART3_IRQn,                            // uart iqrn
+            RCU_UART3, RCU_GPIOC, RCU_GPIOC,       // periph clock, tx gpio clock, rt gpio clock
+            GPIOC, GPIO_AF_8, GPIO_PIN_10,         // tx port, tx alternate, tx pin
+            GPIOC, GPIO_AF_8, GPIO_PIN_11,         // rx port, rx alternate, rx pin
+        }
+    },
+    #endif
+
+    #ifdef BSP_USING_UART4
+    {
+        .uart_periph = UART4,                                 // uart peripheral index
+        .uart_config = {
+            .name = "uart4",
+            .irqn = UART4_IRQn,                            // uart iqrn
+            RCU_UART4, RCU_GPIOC, RCU_GPIOD,       // periph clock, tx gpio clock, rt gpio clock
+            GPIOC, GPIO_AF_8, GPIO_PIN_12,         // tx port, tx alternate, tx pin
+            GPIOD, GPIO_AF_8, GPIO_PIN_2,          // rx port, rx alternate, rx pin
+        }
+    },
+    #endif
+
+    #ifdef BSP_USING_UART5
+    {
+        .uart_periph = USART5,                                 // uart peripheral index
+        .uart_config = {
+            .name = "uart5",
+            .irqn = USART5_IRQn,                            // uart iqrn
+            RCU_USART5, RCU_GPIOC, RCU_GPIOC,       // periph clock, tx gpio clock, rt gpio clock
+            GPIOC, GPIO_AF_8, GPIO_PIN_6,           // tx port, tx alternate, tx pin
+            GPIOC, GPIO_AF_8, GPIO_PIN_7,           // rx port, rx alternate, rx pin
+        }
+    },
+    #endif
+
+    #ifdef BSP_USING_UART6
+    {
+        .uart_periph = UART6,                                 // uart peripheral index
+        .uart_config = {
+            .name = "uart6",
+            .irqn = UART6_IRQn,                            // uart iqrn
+            RCU_UART6, RCU_GPIOE, RCU_GPIOE,       // periph clock, tx gpio clock, rt gpio clock
+            GPIOE, GPIO_AF_8, GPIO_PIN_7,          // tx port, tx alternate, tx pin
+            GPIOE, GPIO_AF_8, GPIO_PIN_8,          // rx port, rx alternate, rx pin
+        }
+    },
+    #endif
+
+    #ifdef BSP_USING_UART7
+    {
+        .uart_periph = UART7,                                 // uart peripheral index
+        .uart_config = {
+            .name = "uart7",
+            .irqn = UART7_IRQn,                            // uart iqrn
+            RCU_UART7, RCU_GPIOE, RCU_GPIOE,       // periph clock, tx gpio clock, rt gpio clock
+            GPIOE, GPIO_AF_8, GPIO_PIN_0,          // tx port, tx alternate, tx pin
+            GPIOE, GPIO_AF_8, GPIO_PIN_1,          // rx port, rx alternate, rx pin
+        }
+    },
+    #endif
+};
+
+/**
+* @brief UART MSP Initialization
+*        This function configures the hardware resources used in this example:
+*           - Peripheral's clock enable
+*           - Peripheral's GPIO Configuration
+*           - NVIC configuration for UART interrupt request enable
+* @param huart: UART handle pointer
+* @retval None
+*/
+void gd32_uart_gpio_init(struct gd32_uart *uart)
+{
+    /* enable USART clock */
+    rcu_periph_clock_enable(uart->uart_config.tx_gpio_clk);
+    rcu_periph_clock_enable(uart->uart_config.rx_gpio_clk);
+    rcu_periph_clock_enable(uart->uart_config.per_clk);
+
+    /* connect port to USARTx_Tx */
+    gpio_af_set(uart->uart_config.tx_port, uart->uart_config.tx_af, uart->uart_config.tx_pin);
+
+    /* connect port to USARTx_Rx */
+    gpio_af_set(uart->uart_config.rx_port, uart->uart_config.rx_af, uart->uart_config.rx_pin);
+
+    /* configure USART Tx as alternate function push-pull */
+    gpio_mode_set(uart->uart_config.tx_port, GPIO_MODE_AF, GPIO_PUPD_PULLUP, uart->uart_config.tx_pin);
+    gpio_output_options_set(uart->uart_config.tx_port, GPIO_OTYPE_PP, GPIO_OSPEED_50MHZ, uart->uart_config.tx_pin);
+
+    /* configure USART Rx as alternate function push-pull */
+    gpio_mode_set(uart->uart_config.rx_port, GPIO_MODE_AF, GPIO_PUPD_NONE, uart->uart_config.rx_pin);
+    gpio_output_options_set(uart->uart_config.rx_port, GPIO_OTYPE_PP, GPIO_OSPEED_50MHZ, uart->uart_config.rx_pin);
+}
+
+static rt_err_t gd32_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
+{
+    struct gd32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+    RT_ASSERT(cfg != RT_NULL);
+
+    uart = rt_container_of(serial, struct gd32_uart, serial);
+
+    usart_baudrate_set(uart->uart_periph, cfg->baud_rate);
+
+    switch (cfg->data_bits)
+    {
+    case DATA_BITS_9:
+        usart_word_length_set(uart->uart_periph, USART_WL_9BIT);
+    break;
+
+    default:
+        usart_word_length_set(uart->uart_periph, USART_WL_8BIT);
+    break;
+    }
+
+    switch (cfg->stop_bits)
+    {
+    case STOP_BITS_2:
+        usart_stop_bit_set(uart->uart_periph, USART_STB_2BIT);
+    break;
+    default:
+        usart_stop_bit_set(uart->uart_periph, USART_STB_1BIT);
+    break;
+    }
+
+    switch (cfg->parity)
+    {
+    case PARITY_ODD:
+        usart_parity_config(uart->uart_periph, USART_PM_ODD);
+    break;
+    case PARITY_EVEN:
+        usart_parity_config(uart->uart_periph, USART_PM_EVEN);
+    break;
+    default:
+        usart_parity_config(uart->uart_periph, USART_PM_NONE);
+    break;
+    }
+
+    return RT_EOK;
+}
+
+static rt_err_t gd32_init(struct rt_serial_device *serial)
+{
+    struct gd32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct gd32_uart, serial);
+
+    gd32_uart_gpio_init(uart);
+
+    if (gd32_configure(serial, &serial->config) != RT_EOK)
+    {
+        return -RT_ERROR;
+    }
+
+    usart_receive_config(uart->uart_periph, USART_RECEIVE_ENABLE);
+    usart_transmit_config(uart->uart_periph, USART_TRANSMIT_ENABLE);
+
+    return RT_EOK;
+}
+
+static rt_err_t gd32_control(struct rt_serial_device *serial, int cmd, void *arg)
+{
+    struct gd32_uart *uart;
+    rt_ubase_t ctrl_arg = (rt_ubase_t)arg;
+
+    RT_ASSERT(serial != RT_NULL);
+    uart = rt_container_of(serial, struct gd32_uart, serial);
+
+    switch (cmd) {
+    case RT_DEVICE_CTRL_OPEN:
+        usart_interrupt_disable(uart->uart_periph, USART_INT_TBE);
+        usart_interrupt_disable(uart->uart_periph, USART_INT_TC);
+        usart_flag_clear(uart->uart_periph, USART_FLAG_RBNE);
+        usart_flag_clear(uart->uart_periph, USART_FLAG_TBE);
+        usart_flag_clear(uart->uart_periph, USART_FLAG_TC);
+        /* enable rx irq */
+        NVIC_SetPriority(uart->uart_config.irqn, 0);
+        NVIC_EnableIRQ(uart->uart_config.irqn);
+        usart_enable(uart->uart_periph);
+#ifdef RT_SERIAL_USING_DMA
+        uart->dmaTxing = RT_FALSE;
+#endif
+    break;
+    case RT_DEVICE_CTRL_CLOSE:
+        NVIC_DisableIRQ(uart->uart_config.irqn);
+        usart_interrupt_disable(uart->uart_periph, USART_INT_RBNE);
+        usart_interrupt_disable(uart->uart_periph, USART_INT_TBE);
+        usart_interrupt_disable(uart->uart_periph, USART_INT_IDLE);
+        usart_interrupt_disable(uart->uart_periph, USART_INT_TC);
+        usart_disable(uart->uart_periph);
+        usart_deinit(uart->uart_periph);
+#ifdef RT_SERIAL_USING_DMA
+        NVIC_DisableIRQ(uart->dma_rx.dma_irq);
+        dma_interrupt_disable(uart->dma_rx.dma_periph, uart->dma_rx.dma_channel, DMA_CHXCTL_HTFIE);
+        dma_interrupt_disable(uart->dma_rx.dma_periph, uart->dma_rx.dma_channel, DMA_CHXCTL_FTFIE);
+        dma_channel_disable(uart->dma_rx.dma_periph, uart->dma_rx.dma_channel);
+        dma_deinit(uart->dma_rx.dma_periph, uart->dma_rx.dma_channel);
+
+        NVIC_DisableIRQ(uart->dma_tx.dma_irq);
+        dma_interrupt_disable(uart->dma_tx.dma_periph, uart->dma_tx.dma_channel, DMA_CHXCTL_FTFIE);
+        dma_channel_disable(uart->dma_tx.dma_periph, uart->dma_tx.dma_channel);
+        dma_deinit(uart->dma_tx.dma_periph, uart->dma_tx.dma_channel);
+#endif
+    break;
+    case RT_DEVICE_CTRL_CLR_INT:
+        /* disable interrupt */
+        if (ctrl_arg & RT_DEVICE_FLAG_INT_RX) {
+            usart_interrupt_disable(uart->uart_periph, USART_INT_RBNE);
+        }
+#ifdef RT_SERIAL_USING_DMA
+        /* disable DMA */
+        if (ctrl_arg & RT_DEVICE_FLAG_DMA_RX) {
+            NVIC_DisableIRQ(uart->dma_rx.dma_irq);
+            dma_interrupt_disable(uart->dma_rx.dma_periph, uart->dma_rx.dma_channel, DMA_CHXCTL_HTFIE);
+            dma_interrupt_disable(uart->dma_rx.dma_periph, uart->dma_rx.dma_channel, DMA_CHXCTL_FTFIE);
+        }
+        if(ctrl_arg & RT_DEVICE_FLAG_DMA_TX) {
+            NVIC_DisableIRQ(uart->dma_tx.dma_irq);
+            dma_interrupt_disable(uart->dma_tx.dma_periph, uart->dma_tx.dma_channel, DMA_CHXCTL_FTFIE);
+        }
+#endif
+    break;
+    case RT_DEVICE_CTRL_SET_INT:
+        /* enable interrupt */
+        if (ctrl_arg & RT_DEVICE_FLAG_INT_RX) {
+            usart_interrupt_enable(uart->uart_periph, USART_INT_RBNE);
+        }
+    break;
+    /* USART config */
+    case RT_DEVICE_CTRL_CONFIG :
+#ifdef RT_SERIAL_USING_DMA
+        if (ctrl_arg & RT_DEVICE_FLAG_DMA_RX) {
+            DMA_RX_Configuration(serial);
+        } else if (ctrl_arg & RT_DEVICE_FLAG_DMA_TX) {
+            DMA_TX_Configuration(serial);
+        }
+#endif
+    break;
+    default :
+    break;
+    }
+
+    return RT_EOK;
+}
+
+static int gd32_putc(struct rt_serial_device *serial, char ch)
+{
+    struct gd32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+    uart = rt_container_of(serial, struct gd32_uart, serial);
+
+    while((usart_flag_get(uart->uart_periph, USART_FLAG_TBE) == RESET));
+    usart_data_transmit(uart->uart_periph, ch);
+
+    return 1;
+}
+
+static int gd32_getc(struct rt_serial_device *serial)
+{
+    int ch;
+    struct gd32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+    uart = rt_container_of(serial, struct gd32_uart, serial);
+
+    ch = -1;
+    if (usart_flag_get(uart->uart_periph, USART_FLAG_RBNE) != RESET) {
+        ch = usart_data_receive(uart->uart_periph);
+    }
+    return ch;
+}
+
+static int gd32_flush(struct rt_serial_device *serial)
+{
+    struct gd32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct gd32_uart, serial);
+    while (!(usart_flag_get(uart->uart_periph, USART_FLAG_TBE) == SET && usart_flag_get(uart->uart_periph, USART_FLAG_TC) == SET));
+
+    return 1;
+}
+
+static void gd32_start_tx(struct rt_serial_device *serial)
+{
+    struct gd32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct gd32_uart, serial);
+    usart_interrupt_enable(uart->uart_periph, USART_INT_TBE);
+}
+
+static void gd32_stop_tx(struct rt_serial_device *serial)
+{
+    struct gd32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct gd32_uart, serial);
+    usart_interrupt_disable(uart->uart_periph, USART_INT_TBE);
+}
+
+#ifdef RT_SERIAL_USING_DMA
+static rt_bool_t gd32_is_dma_txing(struct rt_serial_device *serial)
+{
+    struct gd32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct gd32_uart, serial);
+
+    return uart->dmaTxing;  //RT_FALSE;
+}
+
+static void gd32_start_dma_tx(struct rt_serial_device *serial, rt_uint8_t *buf, rt_size_t size)
+{
+    struct gd32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct gd32_uart, serial);
+
+    // TODO: 启用 DMA 发送
+    DMA_CHM0ADDR(uart->dma_tx.dma_periph, uart->dma_tx.dma_channel) = (uint32_t)(buf);
+    DMA_CHCNT(uart->dma_tx.dma_periph, uart->dma_tx.dma_channel) = (uint32_t)(size);
+    dma_channel_enable(uart->dma_tx.dma_periph, uart->dma_tx.dma_channel);
+
+    uart->dmaTxing = RT_TRUE;
+}
+
+static void gd32_stop_dma_tx(struct rt_serial_device *serial)
+{
+    struct gd32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct gd32_uart, serial);
+
+    // TODO: 禁用 DMA 发送
+    dma_channel_disable(uart->dma_tx.dma_periph, uart->dma_tx.dma_channel);
+    uart->dmaTxing = RT_FALSE;
+}
+#endif
+
+static void gd32_enable_interrupt(struct rt_serial_device *serial)
+{
+    struct gd32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct gd32_uart, serial);
+
+    NVIC_EnableIRQ(uart->uart_config.irqn);
+}
+
+static void gd32_disable_interrupt(struct rt_serial_device *serial)
+{
+    struct gd32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct gd32_uart, serial);
+
+    NVIC_DisableIRQ(uart->uart_config.irqn);
+}
+
+#ifdef RT_SERIAL_USING_DMA
+/**
+ * DMA receive done process. This need add to DMA receive done ISR.
+ *
+ * @param serial serial device
+ */
+static void dma_rx_done_isr(struct rt_serial_device *serial)
+{
+    struct gd32_uart *uart;
+    rt_size_t dma_cnt;
+
+    uart = rt_container_of(serial, struct gd32_uart, serial);
+
+    dma_cnt = RT_SERIAL_DMA_BUFSZ - DMA_CHCNT(uart->dma_rx.dma_periph, uart->dma_rx.dma_channel);
+
+    rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_DMADONE | (dma_cnt << 8));
+
+    dma_interrupt_flag_clear(uart->dma_rx.dma_periph, uart->dma_rx.dma_channel, DMA_INT_FLAG_HTF);
+    dma_interrupt_flag_clear(uart->dma_rx.dma_periph, uart->dma_rx.dma_channel, DMA_INT_FLAG_FTF);
+}
+/**
+ * DMA transmit done process. This need add to DMA transmit done ISR.
+ *
+ * @param serial serial device
+ */
+static void dma_tx_done_isr(struct rt_serial_device *serial)
+{
+    struct gd32_uart *uart;
+    rt_size_t dma_cnt;
+
+    uart = rt_container_of(serial, struct gd32_uart, serial);
+
+    dma_cnt = DMA_CHCNT(uart->dma_tx.dma_periph, uart->dma_tx.dma_channel);
+
+    if (dma_cnt == 0)
+    {
+        rt_hw_serial_isr(&uart->serial, RT_SERIAL_EVENT_TX_DMADONE);
+    }
+    dma_interrupt_flag_clear(uart->dma_tx.dma_periph, uart->dma_tx.dma_channel, DMA_INT_FLAG_FTF);
+}
+#endif
+
+/**
+ * Uart common interrupt process. This need add to uart ISR.
+ *
+ * @param serial serial device
+ */
+static void uart_isr(struct rt_serial_device *serial)
+{
+    struct gd32_uart *uart;
+#ifdef RT_SERIAL_USING_DMA
+    rt_size_t dma_cnt;
+#endif
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct gd32_uart, serial);
+
+    /* UART in mode Receiver -------------------------------------------------*/
+    if ((usart_interrupt_flag_get(uart->uart_periph, USART_INT_FLAG_RBNE) != RESET))
+    {
+        rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
+        /* Clear RXNE interrupt flag */
+        usart_interrupt_flag_clear(uart->uart_periph, USART_INT_FLAG_RBNE);
+    }
+    if ((usart_interrupt_flag_get(uart->uart_periph, USART_INT_FLAG_RBNE_ORERR) != RESET))
+    {
+        usart_data_receive(uart->uart_periph);
+    }
+    if ((usart_interrupt_flag_get(uart->uart_periph, USART_INT_FLAG_TBE) != RESET))
+    {
+        rt_hw_serial_isr(serial, RT_SERIAL_EVENT_TX_DONE);
+        usart_interrupt_flag_clear(uart->uart_periph, USART_INT_FLAG_TBE);
+    }
+#ifdef RT_SERIAL_USING_DMA
+    if ((usart_interrupt_flag_get(uart->uart_periph, USART_INT_FLAG_IDLE) != RESET))
+    {
+        usart_data_receive(uart->uart_periph);
+        dma_cnt = RT_SERIAL_DMA_BUFSZ - DMA_CHCNT(uart->dma_rx.dma_periph, uart->dma_rx.dma_channel);
+        rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_DMADONE | (dma_cnt << 8));
+    }
+    if ((usart_interrupt_flag_get(uart->uart_periph, USART_INT_FLAG_TC) != RESET))
+    {
+        usart_interrupt_flag_clear(uart->uart_periph, USART_INT_FLAG_TC);
+    }
+#endif
+    if ((usart_interrupt_flag_get(uart->uart_periph, USART_INT_FLAG_PERR) != RESET))
+    {
+        usart_data_receive(uart->uart_periph);
+    }
+    if ((usart_interrupt_flag_get(uart->uart_periph, USART_INT_FLAG_EB) != RESET))
+    {
+        usart_interrupt_flag_clear(uart->uart_periph, USART_INT_FLAG_EB);
+    }
+    if ((usart_interrupt_flag_get(uart->uart_periph, USART_INT_FLAG_RT) != RESET))
+    {
+        usart_interrupt_flag_clear(uart->uart_periph, USART_INT_FLAG_RT);
+    }
+}
+
+#if defined(BSP_USING_UART0)
+
+void USART0_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    uart_isr(&uarts[UART0_INDEX].serial);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+
+#ifdef RT_SERIAL_USING_DMA
+void DMA1_Channel2_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    dma_rx_done_isr(&uarts[UART0_INDEX].serial);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+void DMA1_Channel7_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    dma_tx_done_isr(&uarts[UART0_INDEX].serial);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif
+
+#endif /* BSP_USING_UART0 */
+
+#if defined(BSP_USING_UART1)
+
+void USART1_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    uart_isr(&uarts[UART1_INDEX].serial);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+
+#endif /* BSP_USING_UART1 */
+
+#if defined(BSP_USING_UART2)
+
+void USART2_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    uart_isr(&uarts[UART2_INDEX].serial);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+
+#endif /* BSP_USING_UART2 */
+
+#if defined(BSP_USING_UART3)
+
+void UART3_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    uart_isr(&uarts[UART3_INDEX].serial);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+
+#endif /* BSP_USING_UART3 */
+
+#if defined(BSP_USING_UART4)
+
+void UART4_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    uart_isr(&uarts[UART4_INDEX].serial);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif /* BSP_USING_UART4 */
+
+#if defined(BSP_USING_UART5)
+
+void USART5_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    uart_isr(&uarts[UART5_INDEX].serial);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+
+#endif /* BSP_USING_UART5 */
+
+#if defined(BSP_USING_UART6)
+
+void UART6_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    uart_isr(&uarts[UART6_INDEX].serial);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+
+#endif /* BSP_USING_UART6 */
+
+#if defined(BSP_USING_UART7)
+
+void UART7_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    uart_isr(&uarts[UART7_INDEX].serial);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+
+#endif /* BSP_USING_UART7 */
+
+#ifdef RT_SERIAL_USING_DMA
+// TODO: 添加发送 DMA 配置，添加接收 DMA 配置
+static void DMA_RX_Configuration(struct rt_serial_device *serial)
+{
+    dma_single_data_parameter_struct dma_init_struct;
+    struct gd32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+    uart = rt_container_of(serial, struct gd32_uart, serial);
+
+    /* enable DMA1 */
+    rcu_periph_clock_enable(RCU_DMA1);
+
+    /* deinitialize DMA channel3(USART0 tx) */
+    dma_deinit(uart->dma_rx.dma_periph, uart->dma_rx.dma_channel);
+    dma_init_struct.direction = DMA_PERIPH_TO_MEMORY;
+    dma_init_struct.memory_inc = DMA_MEMORY_INCREASE_ENABLE;
+    dma_init_struct.memory0_addr = (uint32_t)(serial->serial_dma_rx);
+    dma_init_struct.number = RT_SERIAL_DMA_BUFSZ;
+    dma_init_struct.periph_addr = (uint32_t)(uart->uart_periph + 0x04);
+    dma_init_struct.periph_inc = DMA_PERIPH_INCREASE_DISABLE;
+    dma_init_struct.periph_memory_width = DMA_PERIPH_WIDTH_8BIT;
+    dma_init_struct.priority = DMA_PRIORITY_ULTRA_HIGH;
+    dma_init_struct.circular_mode = DMA_CIRCULAR_MODE_ENABLE;
+
+    dma_single_data_mode_init(uart->dma_rx.dma_periph, uart->dma_rx.dma_channel, &dma_init_struct);
+    dma_channel_subperipheral_select(uart->dma_rx.dma_periph, uart->dma_rx.dma_channel, uart->dma_rx.dma_subperi);
+
+    dma_interrupt_enable(uart->dma_rx.dma_periph, uart->dma_rx.dma_channel, DMA_CHXCTL_HTFIE);
+    dma_interrupt_enable(uart->dma_rx.dma_periph, uart->dma_rx.dma_channel, DMA_CHXCTL_FTFIE);
+    NVIC_SetPriority(uart->dma_rx.dma_irq, 0);
+    NVIC_EnableIRQ(uart->dma_rx.dma_irq);
+    dma_channel_enable(uart->dma_rx.dma_periph, uart->dma_rx.dma_channel);
+    usart_dma_receive_config(uart->uart_periph, USART_DENR_ENABLE);
+}
+static void DMA_TX_Configuration(struct rt_serial_device *serial)
+{
+    dma_single_data_parameter_struct dma_init_struct;
+    struct gd32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+    uart = rt_container_of(serial, struct gd32_uart, serial);
+
+    /* enable DMA1 */
+    rcu_periph_clock_enable(RCU_DMA1);
+    /* deinitialize DMA channel3(USART0 tx) */
+    dma_deinit(uart->dma_tx.dma_periph, uart->dma_tx.dma_channel);
+    dma_init_struct.direction = DMA_MEMORY_TO_PERIPH;
+    dma_init_struct.memory_inc = DMA_MEMORY_INCREASE_ENABLE;
+//    dma_init_struct.memory0_addr = (uint32_t)tx_buffer;
+//    dma_init_struct.number = ARRAYNUM(tx_buffer);
+    dma_init_struct.periph_addr = (uint32_t)(uart->uart_periph + 0x04);
+    dma_init_struct.periph_inc = DMA_PERIPH_INCREASE_DISABLE;
+    dma_init_struct.periph_memory_width = DMA_PERIPH_WIDTH_8BIT;
+    dma_init_struct.priority = DMA_PRIORITY_ULTRA_HIGH;
+    dma_init_struct.circular_mode = DMA_CIRCULAR_MODE_DISABLE;
+
+    dma_single_data_mode_init(uart->dma_tx.dma_periph, uart->dma_tx.dma_channel, &dma_init_struct);
+    dma_channel_subperipheral_select(uart->dma_tx.dma_periph, uart->dma_tx.dma_channel, uart->dma_tx.dma_subperi);
+
+    dma_interrupt_enable(uart->dma_tx.dma_periph, uart->dma_tx.dma_channel, DMA_CHXCTL_FTFIE);
+    NVIC_SetPriority(uart->dma_tx.dma_irq, 0);
+    NVIC_EnableIRQ(uart->dma_tx.dma_irq);
+
+    usart_interrupt_enable(uart->uart_periph, USART_INT_IDLE);
+    usart_interrupt_enable(uart->uart_periph, USART_INT_TC);
+    usart_dma_transmit_config(uart->uart_periph, USART_DENT_ENABLE);
+}
+#endif
+static const struct rt_uart_ops gd32_uart_ops =
+{
+    .init = gd32_init,
+    .configure = gd32_configure,
+    .control = gd32_control,
+    .putc = gd32_putc,
+    .getc = gd32_getc,
+    .flush = gd32_flush,
+    .start_tx = gd32_start_tx,
+    .stop_tx = gd32_stop_tx,
+#ifdef RT_SERIAL_USING_DMA
+    .is_dma_txing = gd32_is_dma_txing,
+    .start_dma_tx = gd32_start_dma_tx,
+    .stop_dma_tx = gd32_stop_dma_tx,
+#endif
+    .enable_interrupt = gd32_enable_interrupt,
+    .disable_interrupt = gd32_disable_interrupt,
+};
+
+int rt_hw_usart_init(void)
+{
+    int i;
+
+    for (i = 0; i < sizeof(uarts) / sizeof(uarts[0]); i++)
+    {
+        uarts[i].serial.ops    = &gd32_uart_ops;
+
+        /* register UART1 device */
+        rt_hw_serial_register(&uarts[i].serial,
+                              uarts[i].uart_config.name,
+                              RT_DEVICE_FLAG_RDWR |
+                              RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_INT_TX
+#ifdef RT_SERIAL_USING_DMA
+                            | RT_DEVICE_FLAG_DMA_RX | RT_DEVICE_FLAG_DMA_TX
+#endif
+                              , RT_NULL);
+    }
+
+    return 0;
+}
+#endif // RT_USING_SERIAL

bsp/gd32/arm/libraries/gd32_drivers/drv_usartX.h

@@ -0,0 +1,64 @@
+/*
+ * Copyright (c) 2006-2021, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2009-01-05     Bernard      the first version
+ * 2022-06-09     THEWON       first version for serialX
+ */
+
+#ifndef __DRV_USARTX_H__
+#define __DRV_USARTX_H__
+
+#include <rthw.h>
+#include <rtthread.h>
+#include <rtdevice.h>
+
+#define UART_ENABLE_IRQ(n)            NVIC_EnableIRQ((n))
+#define UART_DISABLE_IRQ(n)           NVIC_DisableIRQ((n))
+
+/* stm32 config class */
+struct gd32_uart_config
+{
+    const char *name;
+    IRQn_Type irqn;
+
+    rcu_periph_enum per_clk;
+    rcu_periph_enum tx_gpio_clk;
+    rcu_periph_enum rx_gpio_clk;
+    uint32_t tx_port;
+    uint16_t tx_af;
+    uint16_t tx_pin;
+    uint32_t rx_port;
+    uint16_t rx_af;
+    uint16_t rx_pin;
+};
+
+struct gd32_uart_dma
+{
+    /* dma channel */
+    uint32_t dma_periph;
+    dma_channel_enum dma_channel;
+    dma_subperipheral_enum dma_subperi;
+    /* dma irq channel */
+    IRQn_Type dma_irq;
+};
+
+/* gd32 uart driver class */
+struct gd32_uart
+{
+    uint32_t uart_periph;
+    struct rt_serial_device serial;
+    struct gd32_uart_config uart_config;
+#ifdef RT_SERIAL_USING_DMA
+    rt_bool_t dmaTxing;
+    struct gd32_uart_dma dma_rx;
+    struct gd32_uart_dma dma_tx;
+#endif
+};
+
+int rt_hw_usart_init(void);
+
+#endif // __DRV_USARTX_H__

bsp/n32/libraries/n32_drivers/SConscript

@@ -14,6 +14,8 @@ if GetDepend(['RT_USING_PIN']):
 if GetDepend(['RT_USING_SERIAL']):
     if GetDepend(['RT_USING_SERIAL_V2']):
         src += ['drv_usart_v2.c']
+    elif GetDepend(['RT_USING_SERIAL_X']):
+        src += ['drv_usartX.c']
     else:
         src += ['drv_usart.c']
 

bsp/n32/libraries/n32_drivers/drv_usartX.c

@@ -0,0 +1,839 @@
+/*
+ * File      : usart.c
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2006-2022, RT-Thread Development Team
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://www.rt-thread.org/license/LICENSE
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2009-01-05     Bernard      the first version
+ * 2010-03-29     Bernard      remove interrupt Tx and DMA Rx mode
+ * 2013-05-13     aozima       update for kehong-lingtai.
+ * 2015-01-31     armink       make sure the serial transmit complete in putc()
+ * 2016-05-13     armink       add DMA Rx mode
+ * 2017-01-19     aubr.cool    add interrupt Tx mode
+ * 2017-04-13     aubr.cool    correct Rx parity err
+ * 2021-08-20     breo.com     first version
+ * 2022-06-01     THEWON       first version for serialX
+ */
+
+#include <rtdevice.h>
+#include <rthw.h>
+#include <board.h>
+#include "drv_usartX.h"
+
+#define UART_ENABLE_IRQ(n)            NVIC_EnableIRQ((n))
+#define UART_DISABLE_IRQ(n)           NVIC_DisableIRQ((n))
+
+#ifdef RT_SERIAL_USING_DMA
+static void DMA_RX_Configuration(struct rt_serial_device *serial);
+static void DMA_TX_Configuration(struct rt_serial_device *serial);
+#endif
+
+static rt_err_t n32_uart_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
+{
+    struct n32_uart *uart;
+    USART_InitType USART_InitStructure;
+
+    RT_ASSERT(serial != RT_NULL);
+    RT_ASSERT(cfg != RT_NULL);
+
+    uart = rt_container_of(serial, struct n32_uart, serial);
+
+    USART_InitStructure.BaudRate = cfg->baud_rate;
+
+    switch (cfg->data_bits)
+    {
+    case DATA_BITS_8 :
+        USART_InitStructure.WordLength = USART_WL_8B;
+    break;
+    case DATA_BITS_9 :
+        USART_InitStructure.WordLength = USART_WL_9B;
+    break;
+    default:
+        USART_InitStructure.WordLength = USART_WL_8B;
+    break;
+    }
+
+    switch (cfg->stop_bits)
+    {
+    case STOP_BITS_1 :
+        USART_InitStructure.StopBits = USART_STPB_1;
+    break;
+    case STOP_BITS_2 :
+        USART_InitStructure.StopBits = USART_STPB_2;
+    break;
+    default:
+        USART_InitStructure.StopBits = USART_STPB_1;
+    break;
+    }
+
+    switch (cfg->parity)
+    case PARITY_NONE :
+        USART_InitStructure.Parity = USART_PE_NO;
+    break;
+    case PARITY_ODD :
+        USART_InitStructure.Parity = USART_PE_ODD;
+    break;
+    case PARITY_EVEN :
+        USART_InitStructure.Parity = USART_PE_EVEN;
+    break;
+    default:
+        USART_InitStructure.Parity = USART_PE_NO;
+    break;
+    }
+
+    USART_InitStructure.HardwareFlowControl = USART_HFCTRL_NONE;
+    USART_InitStructure.Mode = USART_MODE_RX | USART_MODE_TX;
+    USART_Init(uart->uart_device, &USART_InitStructure);
+
+    return RT_EOK;
+}
+
+static rt_err_t n32_uart_init(struct rt_serial_device *serial)
+{
+    struct n32_uart *uart;
+    USART_InitType USART_InitStructure;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct n32_uart, serial);
+
+    n32_msp_usart_init(uart->uart_device);
+
+    if (n32_uart_configure(serial, &serial->config) != RT_EOK)
+    {
+        return -RT_ERROR;
+    }
+
+    /* Enable USART */
+    USART_Enable(uart->uart_device, ENABLE);
+
+    USART_ClrFlag(uart->uart_device, USART_FLAG_TXDE|USART_FLAG_TXC);
+
+    return RT_EOK;
+}
+
+static rt_err_t n32_uart_control(struct rt_serial_device *serial, int cmd, void *arg)
+{
+    struct n32_uart *uart;
+    rt_uint32_t ctrl_arg = (rt_uint32_t)(arg);
+    NVIC_InitType NVIC_InitStructure;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct n32_uart, serial);
+
+    switch (cmd) {
+    case RT_DEVICE_CTRL_OPEN:
+        USART_ConfigInt(uart->uart_device, USART_INT_TXDE, DISABLE);
+        USART_ClrIntPendingBit(uart->uart_device, USART_INT_RXDNE);
+        USART_ClrIntPendingBit(uart->uart_device, USART_INT_TXDE);
+        USART_ClrIntPendingBit(uart->uart_device, USART_INT_TXC);
+        /* enable rx irq */
+        UART_ENABLE_IRQ(uart->irq);
+#ifdef RT_SERIAL_USING_DMA
+        uart->dmaTxing = RT_FALSE;
+#endif
+    break;
+    case RT_DEVICE_CTRL_CLOSE:
+        /* disable rx irq */
+        UART_DISABLE_IRQ(uart->irq);
+        USART_ConfigInt(uart->uart_device, USART_INT_RXDNE, DISABLE);
+        USART_ConfigInt(uart->uart_device, USART_INT_TXDE, DISABLE);
+        USART_ConfigInt(uart->uart_device, USART_INT_TXC, DISABLE);
+        USART_ClrIntPendingBit(uart->uart_device, USART_INT_RXDNE);
+        USART_ClrIntPendingBit(uart->uart_device, USART_INT_TXDE);
+        USART_ClrIntPendingBit(uart->uart_device, USART_INT_TXC);
+
+#ifdef RT_SERIAL_USING_DMA
+        NVIC_InitStructure.NVIC_IRQChannel = uart->dma_rx.dma_irq;
+        NVIC_InitStructure.NVIC_IRQChannelCmd = DISABLE;
+        NVIC_Init(&NVIC_InitStructure);
+        DMA_EnableChannel(uart->dma_rx.dma_ch, DISABLE);
+        DMA_ConfigInt(uart->dma_rx.dma_ch, DMA_INT_HTX, DISABLE);
+        DMA_ConfigInt(uart->dma_rx.dma_ch, DMA_INT_TXC, DISABLE);
+        DMA_DeInit(uart->dma_rx.dma_ch);
+        NVIC_InitStructure.NVIC_IRQChannel = uart->dma_tx.dma_irq;
+        NVIC_InitStructure.NVIC_IRQChannelCmd = DISABLE;
+        NVIC_Init(&NVIC_InitStructure);
+        DMA_EnableChannel(uart->dma_tx.dma_ch, DISABLE);
+        DMA_ConfigInt(uart->dma_tx.dma_ch, DMA_INT_TXC, DISABLE);
+        DMA_DeInit(uart->dma_tx.dma_ch);
+#endif
+    break;
+    case RT_DEVICE_CTRL_CLR_INT:
+        /* disable interrupt */
+        if (ctrl_arg & RT_DEVICE_FLAG_INT_RX) {
+            USART_ConfigInt(uart->uart_device, USART_INT_RXDNE, DISABLE);
+        }
+
+#ifdef RT_SERIAL_USING_DMA
+        /* disable DMA */
+        if (ctrl_arg & RT_DEVICE_FLAG_DMA_RX) {
+            NVIC_InitStructure.NVIC_IRQChannel = uart->dma_rx.dma_irq;
+            NVIC_InitStructure.NVIC_IRQChannelCmd = DISABLE;
+            NVIC_Init(&NVIC_InitStructure);
+            DMA_ConfigInt(uart->dma_rx.dma_ch, DMA_INT_HTX, DISABLE);
+            DMA_ConfigInt(uart->dma_rx.dma_ch, DMA_INT_TXC, DISABLE);
+        }
+        if(ctrl_arg & RT_DEVICE_FLAG_DMA_TX) {
+            NVIC_InitStructure.NVIC_IRQChannel = uart->dma_tx.dma_irq;
+            NVIC_InitStructure.NVIC_IRQChannelCmd = DISABLE;
+            NVIC_Init(&NVIC_InitStructure);
+            DMA_ConfigInt(uart->dma_tx.dma_ch, DMA_INT_TXC, DISABLE);
+        }
+#endif
+    break;
+    case RT_DEVICE_CTRL_SET_INT:
+        /* enable interrupt */
+        if (ctrl_arg & RT_DEVICE_FLAG_INT_RX) {
+            USART_ConfigInt(uart->uart_device, USART_INT_RXDNE, ENABLE);
+        }
+    break;
+    /* USART config */
+    case RT_DEVICE_CTRL_CONFIG :
+#ifdef RT_SERIAL_USING_DMA
+        if (ctrl_arg & RT_DEVICE_FLAG_DMA_RX) {
+            DMA_RX_Configuration(serial);
+        } else if (ctrl_arg & RT_DEVICE_FLAG_DMA_TX) {
+            DMA_TX_Configuration(serial);
+        }
+#endif
+    break;
+    default :
+    break;
+    }
+    return RT_EOK;
+}
+
+static int n32_uart_putc(struct rt_serial_device *serial, char c)
+{
+    struct n32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct n32_uart, serial);
+
+    while (!(uart->uart_device->STS & USART_FLAG_TXDE));
+    uart->uart_device->DAT = c;
+
+    return 1;
+}
+
+static int n32_uart_getc(struct rt_serial_device *serial)
+{
+    int ch;
+    struct n32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct n32_uart, serial);
+
+    ch = -1;
+    if (uart->uart_device->STS & USART_FLAG_RXDNE)
+    {
+        ch = uart->uart_device->DAT & 0xff;
+    }
+
+    return ch;
+}
+
+static int n32_uart_flush(struct rt_serial_device *serial)
+{
+    struct n32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct n32_uart, serial);
+    while(!((uart->uart_device->STS & USART_FLAG_TXDE) && (uart->uart_device->STS & USART_FLAG_TXC)));
+
+    return 0;
+}
+
+static void n32_start_tx(struct rt_serial_device *serial)
+{
+    struct n32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct n32_uart, serial);
+
+    USART_ConfigInt(uart->uart_device, USART_INT_TXDE, ENABLE);
+}
+
+static void n32_stop_tx(struct rt_serial_device *serial)
+{
+    struct n32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct n32_uart, serial);
+
+    USART_ConfigInt(uart->uart_device, USART_INT_TXDE, DISABLE);
+}
+
+#ifdef RT_SERIAL_USING_DMA
+static rt_bool_t n32_is_dma_txing(struct rt_serial_device *serial)
+{
+    struct n32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct n32_uart, serial);
+
+//    return uart->dmaTxing;  //RT_FALSE;
+    return (DMA_GetFlagStatus(uart->dma_tx.dma_flag, uart->dma_tx.dma_module) == SET);
+}
+
+static void n32_start_dma_tx(struct rt_serial_device *serial, rt_uint8_t *buf, rt_size_t size)
+{
+    struct n32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct n32_uart, serial);
+
+    // TODO: 启用 DMA 发送
+    uart->dma_tx.dma_ch->MADDR = (uint32_t)(buf);
+    uart->dma_tx.dma_ch->TXNUM = (uint32_t)(size);
+    DMA_EnableChannel(uart->dma_tx.dma_ch, ENABLE);
+
+    uart->dmaTxing = RT_TRUE;
+}
+
+static void n32_stop_dma_tx(struct rt_serial_device *serial)
+{
+    struct n32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct n32_uart, serial);
+
+    // TODO: 禁用 DMA 发送
+    DMA_EnableChannel(uart->dma_tx.dma_ch, DISABLE);
+    uart->dmaTxing = RT_FALSE;
+}
+#endif
+
+static void n32_enable_interrupt(struct rt_serial_device *serial)
+{
+    struct n32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct n32_uart, serial);
+
+    UART_ENABLE_IRQ(uart->irq);
+}
+
+static void n32_disable_interrupt(struct rt_serial_device *serial)
+{
+    struct n32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct n32_uart, serial);
+
+    UART_DISABLE_IRQ(uart->irq);
+}
+
+#ifdef RT_SERIAL_USING_DMA
+/**
+ * DMA receive done process. This need add to DMA receive done ISR.
+ *
+ * @param serial serial device
+ */
+static void dma_rx_done_isr(struct rt_serial_device *serial)
+{
+    struct n32_uart *uart;
+    rt_size_t dma_cnt;
+
+    uart = rt_container_of(serial, struct n32_uart, serial);
+
+    dma_cnt = RT_SERIAL_DMA_BUFSZ - DMA_GetCurrDataCounter(uart->dma_rx.dma_ch);
+
+    rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_DMADONE | (dma_cnt << 8));
+
+    DMA_ClearFlag(uart->dma_rx.dma_flag, uart->dma_rx.dma_module);
+    DMA_ClrIntPendingBit(uart->dma_rx.dma_flag, uart->dma_rx.dma_module);
+}
+/**
+ * DMA transmit done process. This need add to DMA transmit done ISR.
+ *
+ * @param serial serial device
+ */
+static void dma_tx_done_isr(struct rt_serial_device *serial)
+{
+    struct n32_uart *uart;
+    rt_size_t dma_cnt;
+
+    uart = rt_container_of(serial, struct n32_uart, serial);
+
+    dma_cnt = DMA_GetCurrDataCounter(uart->dma_tx.dma_ch);
+
+    if (dma_cnt == 0)
+    {
+        rt_hw_serial_isr(&uart->serial, RT_SERIAL_EVENT_TX_DMADONE);
+    }
+    DMA_ClrIntPendingBit(uart->dma_tx.dma_flag, uart->dma_rx.dma_module);
+}
+#endif
+
+/**
+ * Uart common interrupt process. This need add to uart ISR.
+ *
+ * @param serial serial device
+ */
+static void uart_isr(struct rt_serial_device *serial)
+{
+    struct n32_uart *uart;
+#ifdef RT_SERIAL_USING_DMA
+    rt_size_t dma_cnt;
+#endif
+
+    RT_ASSERT(uart != RT_NULL);
+
+    uart = rt_container_of(serial, struct n32_uart, serial);
+
+    if(USART_GetIntStatus(uart->uart_device, USART_INT_RXDNE) != RESET)
+    {
+        if(USART_GetFlagStatus(uart->uart_device, USART_FLAG_PEF) == RESET)
+        {
+            rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
+        }
+        /* clear interrupt */
+        USART_ClrIntPendingBit(uart->uart_device, USART_INT_RXDNE);
+    }
+    if(USART_GetIntStatus(uart->uart_device, USART_INT_TXDE) != RESET)
+    {
+        if(USART_GetFlagStatus(uart->uart_device, USART_FLAG_PEF) == RESET)
+        {
+            rt_hw_serial_isr(serial, RT_SERIAL_EVENT_TX_DONE);
+        }
+        /* clear interrupt */
+        USART_ClrIntPendingBit(uart->uart_device, USART_INT_TXDE);
+    }
+
+#ifdef RT_SERIAL_USING_DMA
+    if(USART_GetIntStatus(uart->uart_device, USART_INT_IDLEF) != RESET)
+    {
+        /* read a data for clear receive idle interrupt flag */
+        USART_ReceiveData(uart->uart_device);
+
+        dma_cnt = RT_SERIAL_DMA_BUFSZ - DMA_GetCurrDataCounter(uart->dma_rx.dma_ch);
+
+        rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_DMADONE | (dma_cnt << 8));
+    }
+#endif
+    if (USART_GetFlagStatus(uart->uart_device, USART_FLAG_OREF) == SET)
+    {
+        n32_uart_getc(serial);
+    }
+}
+
+static const struct rt_uart_ops n32_uart_ops =
+{
+    .configure = n32_uart_configure,
+    .control = n32_uart_control,
+    .putc = n32_uart_putc,
+    .getc = n32_uart_getc,
+    .flush = n32_uart_flush,
+    .start_tx = n32_start_tx,
+    .stop_tx = n32_stop_tx,
+#ifdef RT_SERIAL_USING_DMA
+    .is_dma_txing = n32_is_dma_txing,
+    .start_dma_tx = n32_start_dma_tx,
+    .stop_dma_tx = n32_stop_dma_tx,
+#endif
+    .enable_interrupt = n32_enable_interrupt,
+    .disable_interrupt = n32_disable_interrupt,
+};
+
+#if defined(BSP_USING_UART1)
+/* UART1 device driver structure */
+struct n32_uart uart1 =
+{
+    .uart_device = USART1,
+    .irq = USART1_IRQn,
+#ifdef RT_SERIAL_USING_DMA
+    .dmaTxing = RT_FALSE,
+    .dma_rx = {
+        DMA1_CH5,
+        DMA1,
+        DMA1_FLAG_TC5 | DMA1_FLAG_HT5,
+        DMA1_Channel5_IRQn,
+    },
+    .dma_tx = {
+        DMA1_CH4,
+        DMA1,
+        DMA1_FLAG_TC4,
+        DMA1_Channel4_IRQn,
+    },
+#endif
+};
+
+void USART1_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    uart_isr(&uart1.serial);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+
+#ifdef RT_SERIAL_USING_DMA
+void DMA1_Channel5_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    dma_rx_done_isr(&uart1.serial);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+void DMA1_Channel4_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    dma_tx_done_isr(&uart1.serial);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif
+#endif /* BSP_USING_UART1 */
+
+#if defined(BSP_USING_UART2)
+/* UART2 device driver structure */
+struct n32_uart uart2 =
+{
+    .uart_device = USART2,
+    .irq = USART2_IRQn,
+#ifdef RT_SERIAL_USING_DMA
+    .dmaTxing = RT_FALSE,
+    .dma_rx = {
+        DMA1_CH6,
+        DMA1,
+        DMA1_FLAG_TC6 | DMA1_FLAG_HT6,
+        DMA1_Channel6_IRQn,
+    },
+    .dma_tx = {
+        DMA1_CH7,
+        DMA1,
+        DMA1_FLAG_TC7,
+        DMA1_Channel7_IRQn,
+    },
+#endif
+};
+
+void USART2_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    uart_isr(&uart2.serial);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+
+#ifdef RT_SERIAL_USING_DMA
+void DMA1_Channel6_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    dma_rx_done_isr(&uart2.serial);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif
+#endif /* BSP_USING_UART2 */
+
+#if defined(BSP_USING_UART3)
+/* UART3 device driver structure */
+struct n32_uart uart3 =
+{
+    .uart_device = USART3,
+    .irq = USART3_IRQn,
+#ifdef RT_SERIAL_USING_DMA
+    .dmaTxing = RT_FALSE,
+    .dma_rx = {
+        DMA1_CH3,
+        DMA1,
+        DMA1_FLAG_TC3 | DMA1_FLAG_HT3,
+        DMA1_Channel3_IRQn,
+    },
+    .dma_tx = {
+        DMA1_CH2,
+        DMA1,
+        DMA1_FLAG_TC2,
+        DMA1_Channel2_IRQn,
+    },
+#endif
+};
+
+void USART3_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    uart_isr(&uart3.serial);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+
+#ifdef RT_SERIAL_USING_DMA
+void DMA1_Channel3_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    dma_rx_done_isr(&uart3.serial);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif
+#endif /* BSP_USING_UART3 */
+
+#if defined(BSP_USING_UART4)
+/* UART4 device driver structure */
+struct n32_uart uart4 =
+{
+    .uart_device = UART4,
+    .irq = UART4_IRQn,
+#ifdef RT_SERIAL_USING_DMA
+    .dmaTxing = RT_FALSE,
+    .dma_rx = {
+        DMA2_CH3,
+        DMA2,
+        DMA2_FLAG_TC3 | DMA2_FLAG_HT3,
+        DMA2_Channel3_IRQn,
+    },
+    .dma_tx = {
+        DMA2_CH5,
+        DMA2,
+        DMA2_FLAG_TC5,
+        DMA2_Channel5_IRQn,
+    },
+#endif
+};
+
+void UART4_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    uart_isr(&uart4.serial);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+
+#ifdef RT_SERIAL_USING_DMA
+void DMA2_Channel3_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    dma_rx_done_isr(&uart4.serial);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif
+#endif /* BSP_USING_UART4 */
+
+static void NVIC_Configuration(struct n32_uart *uart)
+{
+    NVIC_InitType NVIC_InitStructure;
+
+    /* Enable the USART1 Interrupt */
+    NVIC_InitStructure.NVIC_IRQChannel = uart->irq;
+    NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
+    NVIC_InitStructure.NVIC_IRQChannelSubPriority = 1;
+    NVIC_InitStructure.NVIC_IRQChannelCmd = DISABLE;
+    NVIC_Init(&NVIC_InitStructure);
+}
+
+#ifdef RT_SERIAL_USING_DMA
+// TODO: 添加发送 DMA 配置，添加接收 DMA 配置
+static void DMA_RX_Configuration(struct rt_serial_device *serial)
+{
+    DMA_InitType DMA_InitStructure;
+    NVIC_InitType NVIC_InitStructure;
+    struct n32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+    uart = rt_container_of(serial, struct n32_uart, serial);
+
+    /* enable transmit idle interrupt */
+    USART_ConfigInt(uart->uart_device, USART_INT_IDLEF, ENABLE);
+
+    /* DMA clock enable */
+    RCC_EnableAHBPeriphClk(RCC_AHB_PERIPH_DMA1, ENABLE);
+    RCC_EnableAHBPeriphClk(RCC_AHB_PERIPH_DMA2, ENABLE);
+
+    /* rx dma config */
+    DMA_InitStructure.PeriphAddr = (uint32_t)&(uart->uart_device->DAT);
+    DMA_InitStructure.MemAddr = (uint32_t)(serial->serial_dma_rx);
+    DMA_InitStructure.Direction = DMA_DIR_PERIPH_SRC;
+    DMA_InitStructure.BufSize = RT_SERIAL_DMA_BUFSZ;
+    DMA_InitStructure.PeriphInc = DMA_PERIPH_INC_DISABLE;
+    DMA_InitStructure.DMA_MemoryInc = DMA_MEM_INC_ENABLE;
+    DMA_InitStructure.PeriphDataSize = DMA_PERIPH_DATA_SIZE_BYTE;
+    DMA_InitStructure.MemDataSize = DMA_MemoryDataSize_Byte;
+    DMA_InitStructure.CircularMode = DMA_MODE_CIRCULAR;
+    DMA_InitStructure.Priority = DMA_PRIORITY_HIGH;
+    DMA_InitStructure.Mem2Mem = DMA_M2M_DISABLE;
+
+    DMA_DeInit(uart->dma_rx.dma_ch);
+    DMA_Init(uart->dma_rx.dma_ch, &DMA_InitStructure);
+
+    DMA_ClearFlag(uart->dma_rx.dma_flag, uart->dma_rx.dma_module);
+    DMA_ConfigInt(uart->dma_rx.dma_ch, DMA_INT_HTX, ENABLE);
+    DMA_ConfigInt(uart->dma_rx.dma_ch, DMA_INT_TXC, ENABLE);
+
+    USART_EnableDMA(uart->uart_device, USART_DMAREQ_RX, ENABLE);
+    DMA_EnableChannel(uart->dma_rx.dma_ch, ENABLE);
+
+    /* rx dma interrupt config */
+    NVIC_InitStructure.NVIC_IRQChannel = uart->dma_rx.dma_irq;
+    NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
+    NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
+    NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
+    NVIC_Init(&NVIC_InitStructure);
+}
+static void DMA_TX_Configuration(struct rt_serial_device *serial)
+{
+    DMA_InitType DMA_InitStructure;
+    NVIC_InitType NVIC_InitStructure;
+    struct n32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+    uart = rt_container_of(serial, struct n32_uart, serial);
+
+    /* enable transmit idle interrupt */
+//    USART_ConfigInt(uart->uart_device, USART_INT_IDLEF, ENABLE);
+
+    /* DMA clock enable */
+    RCC_EnableAHBPeriphClk(RCC_AHB_PERIPH_DMA1, ENABLE);
+    RCC_EnableAHBPeriphClk(RCC_AHB_PERIPH_DMA2, ENABLE);
+
+    /* tx dma config */
+    DMA_InitStructure.PeriphAddr = (uint32_t)&(uart->uart_device->DAT);
+//    DMA_InitStructure.MemAddr = (uint32_t)(serial->serial_dma_tx);
+    DMA_InitStructure.Direction = DMA_DIR_PERIPH_DST;
+//    DMA_InitStructure.BufSize = serial->config.bufsz;
+    DMA_InitStructure.PeriphInc = DMA_PERIPH_INC_DISABLE;
+    DMA_InitStructure.DMA_MemoryInc = DMA_MEM_INC_ENABLE;
+    DMA_InitStructure.PeriphDataSize = DMA_PERIPH_DATA_SIZE_BYTE;
+    DMA_InitStructure.MemDataSize = DMA_MemoryDataSize_Byte;
+    DMA_InitStructure.CircularMode = DMA_MODE_NORMAL;
+    DMA_InitStructure.Priority = DMA_PRIORITY_HIGH;
+    DMA_InitStructure.Mem2Mem = DMA_M2M_DISABLE;
+
+    DMA_DeInit(uart->dma_tx.dma_ch);
+    DMA_Init(uart->dma_tx.dma_ch, &DMA_InitStructure);
+
+    DMA_ClearFlag(uart->dma_tx.dma_flag, uart->dma_tx.dma_module);
+    DMA_ConfigInt(uart->dma_tx.dma_ch, DMA_INT_TXC, ENABLE);
+    USART_EnableDMA(uart->uart_device, USART_DMAREQ_TX, ENABLE);
+//    DMA_EnableChannel(uart->dma_tx.dma_ch, ENABLE);
+
+    /* rx dma interrupt config */
+    NVIC_InitStructure.NVIC_IRQChannel = uart->dma_tx.dma_irq;
+    NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
+    NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
+    NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
+    NVIC_Init(&NVIC_InitStructure);
+}
+#endif
+
+int rt_hw_usart_init(void)
+{
+    struct n32_uart *uart;
+
+#if defined(BSP_USING_UART1)
+    uart = &uart1;
+
+    uart->serial.ops = &n32_uart_ops;
+
+    NVIC_Configuration(uart);
+
+    /* register UART1 device */
+    rt_hw_serial_register(&uart->serial, "uart1",
+                          RT_DEVICE_FLAG_RDWR |
+                          RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_INT_TX
+#ifdef RT_SERIAL_USING_DMA
+                          | RT_DEVICE_FLAG_DMA_RX | RT_DEVICE_FLAG_DMA_TX
+#endif
+                          , uart);
+#endif /* BSP_USING_UART1 */
+
+#if defined(BSP_USING_UART2)
+    uart = &uart2;
+
+    uart->serial.ops    = &n32_uart_ops;
+
+    NVIC_Configuration(uart);
+
+    /* register UART2 device */
+    rt_hw_serial_register(&uart->serial, "uart2",
+                          RT_DEVICE_FLAG_RDWR |
+                          RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_INT_TX
+#ifdef RT_SERIAL_USING_DMA
+                          | RT_DEVICE_FLAG_DMA_RX | RT_DEVICE_FLAG_DMA_TX
+#endif
+                          , uart);
+#endif /* BSP_USING_UART2 */
+
+#if defined(BSP_USING_UART3)
+    uart = &uart3;
+
+    uart->serial.ops    = &n32_uart_ops;
+
+    NVIC_Configuration(uart);
+
+    /* register UART3 device */
+    rt_hw_serial_register(&uart->serial, "uart3",
+                          RT_DEVICE_FLAG_RDWR |
+                          RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_INT_TX
+#ifdef RT_SERIAL_USING_DMA
+                          | RT_DEVICE_FLAG_DMA_RX | RT_DEVICE_FLAG_DMA_TX
+#endif
+                          , uart);
+#endif /* BSP_USING_UART3 */
+
+#if defined(BSP_USING_UART4)
+    uart = &uart4;
+
+    uart->serial.ops    = &n32_uart_ops;
+
+    NVIC_Configuration(uart);
+
+    /* register UART4 device */
+    rt_hw_serial_register(&uart->serial, "uart4",
+                          RT_DEVICE_FLAG_RDWR |
+                          RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_INT_TX
+#ifdef RT_SERIAL_USING_DMA
+                          | RT_DEVICE_FLAG_DMA_RX | RT_DEVICE_FLAG_DMA_TX
+#endif
+                          , uart);
+#endif /* BSP_USING_UART4 */
+
+    return RT_EOK;
+}
+INIT_BOARD_EXPORT(rt_hw_usart_init);
+

bsp/n32/libraries/n32_drivers/drv_usartX.h

@@ -0,0 +1,39 @@
+/*
+ * Copyright (c) 2006-2022, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2022-06-06     THEWON       first version for serialX
+ */
+
+#ifndef __DRV_USARTX_H__
+#define __DRV_USARTX_H__
+
+#include "rtdevice.h"
+
+struct n32_uart_dma
+{
+    /* dma channel */
+    DMA_ChannelType *dma_ch;
+    DMA_Module *dma_module;
+    /* dma global flag */
+    uint32_t dma_flag;
+    /* dma irq channel */
+    uint8_t dma_irq;
+};
+
+struct n32_uart
+{
+    USART_Module *uart_device;
+    struct rt_serial_device serial;
+    IRQn_Type irq;
+#ifdef RT_SERIAL_USING_DMA
+    rt_bool_t dmaTxing;
+    struct n32_uart_dma dma_rx;
+    struct n32_uart_dma dma_tx;
+#endif
+};
+
+#endif  /* __DRV_USART_H__ */

bsp/nuvoton/libraries/nuc980/rtt_port/drv_common.c

@@ -13,7 +13,11 @@
 #include <rtthread.h>
 #include <rthw.h>
 #include "board.h"
+#ifdef RT_USING_SERIAL_X
+#include "drv_uartX.h"
+#else
 #include "drv_uart.h"
+#endif
 #include "drv_sys.h"
 
 #if defined(BSP_USING_MMU)

bsp/nuvoton/libraries/nuc980/rtt_port/drv_uartX.c

@@ -0,0 +1,390 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2023-02-01     THEWON       first version for serialX
+ */
+
+#include <rtconfig.h>
+
+#ifdef RT_USING_SERIAL
+
+#include <rtdevice.h>
+#include "drv_uartX.h"
+#include "drv_sys.h"
+
+//#define DRV_DEBUG
+#define LOG_TAG             "drv.uart"
+// #include <drv_log.h>
+
+#if !defined(BSP_USING_UART1) && !defined(BSP_USING_UART2) && !defined(BSP_USING_UART3) && \
+    !defined(BSP_USING_UART4) && !defined(BSP_USING_UART5) && !defined(BSP_USING_UART6) && \
+    !defined(BSP_USING_UART7) && !defined(BSP_USING_UART8) && !defined(BSP_USING_UART9) && \
+    !defined(BSP_USING_UARTA)
+#error "Please define at least one BSP_USING_UARTx"
+/* this driver can be disabled at menuconfig -> RT-Thread Components -> Device Drivers */
+#endif
+
+static int nu_uart_flush(struct rt_serial_device *serial);
+
+static void nu_uart_isr(int vector, void *param);
+
+static struct nu_uart nu_uart_arr[] =
+{
+#ifdef BSP_USING_UART0
+    UART0_CONFIG,
+#endif
+#ifdef BSP_USING_UART1
+    UART1_CONFIG,
+#endif
+#ifdef BSP_USING_UART2
+    UART2_CONFIG,
+#endif
+#ifdef BSP_USING_UART3
+    UART3_CONFIG,
+#endif
+#ifdef BSP_USING_UART4
+    UART4_CONFIG,
+#endif
+#ifdef BSP_USING_UART5
+    UART5_CONFIG,
+#endif
+#ifdef BSP_USING_UART6
+    UART6_CONFIG,
+#endif
+#ifdef BSP_USING_UART7
+    UART7_CONFIG,
+#endif
+#ifdef BSP_USING_UART8
+    UART8_CONFIG,
+#endif
+#ifdef BSP_USING_UART9
+    UART9_CONFIG,
+#endif
+#ifdef BSP_USING_UARTA
+    UARTA_CONFIG,
+#endif
+};
+
+// for ALL uarts
+static void nu_uart_isr(int vector, void *param)
+{
+    /* Get base address of uart register */
+    nu_uart_t serial = (nu_uart_t)param;
+    UART_T *uart_base = ((nu_uart_t)serial)->uart_base;
+
+    /* Get interrupt event */
+    uint32_t u32IntSts = uart_base->INTSTS;
+    uint32_t u32FIFOSts = uart_base->FIFOSTS;
+
+    if (u32IntSts & (UART_INTSTS_RDAINT_Msk | UART_INTSTS_RXTOINT_Msk)) {   // Received Data Available interrupt
+        rt_hw_serial_isr(&serial->dev, RT_SERIAL_EVENT_RX_IND);
+    }
+
+    if (u32IntSts & UART_INTSTS_THREINT_Msk) {                            // Transmit Holding Register Empty interrupt
+        rt_hw_serial_isr(&serial->dev, RT_SERIAL_EVENT_TX_DONE | (16<<8));
+    }
+
+    // if (uRegISR & UART_INTSTS_MODEMINT_Msk) {
+        // uRegMSR = huart->Instance->MSR;
+        // uRegMSR |= UART_MSR_DCTSF_Msk;
+        // huart->Instance->MSR = uRegMSR;
+    // }
+
+    // if (uRegISR & UART_ISR_BUF_ERR_INT_Msk) {
+        // if (uRegFSR & (UART_FSR_TX_OVER_IF_Msk)) {
+            // huart->Instance->FSR = UART_FSR_TX_OVER_IF_Msk;
+        // }
+        // if (uRegFSR & (UART_FSR_RX_OVER_IF_Msk)) {
+            // huart->Instance->FSR = UART_FSR_RX_OVER_IF_Msk;
+        // }
+    // }
+
+    // if (uRegFSR & (UART_FSR_BIF_Msk | UART_FSR_FEF_Msk | UART_FSR_PEF_Msk | UART_FSR_RX_OVER_IF_Msk | UART_FSR_TX_OVER_IF_Msk)) {
+        // huart->Instance->FSR = (UART_FSR_BIF_Msk | UART_FSR_FEF_Msk | UART_FSR_PEF_Msk | UART_FSR_RX_OVER_IF_Msk | UART_FSR_TX_OVER_IF_Msk);
+    // }
+    uart_base->INTSTS = u32IntSts;
+    uart_base->FIFOSTS = u32FIFOSts;
+}
+
+/**
+ * Configure uart port
+ */
+static rt_err_t nu_uart_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
+{
+    rt_err_t ret = RT_EOK;
+    uint32_t uart_word_len = 0;
+    uint32_t uart_stop_bit = 0;
+    uint32_t uart_parity = 0;
+
+    /* Get base address of uart register */
+    UART_T *uart_base = ((nu_uart_t)serial)->uart_base;
+
+    /* Check baudrate */
+    RT_ASSERT(cfg->baud_rate != 0);
+
+    /* Check word len */
+    switch (cfg->data_bits) {
+    case DATA_BITS_5:
+        uart_word_len = UART_WORD_LEN_5;
+    break;
+    case DATA_BITS_6:
+        uart_word_len = UART_WORD_LEN_6;
+    break;
+    case DATA_BITS_7:
+        uart_word_len = UART_WORD_LEN_7;
+    break;
+    case DATA_BITS_8:
+        uart_word_len = UART_WORD_LEN_8;
+    break;
+    default:
+        uart_word_len = UART_WORD_LEN_8;
+    break;
+    }
+
+    /* Check stop bit */
+    switch (cfg->stop_bits) {
+    case STOP_BITS_1:
+        uart_stop_bit = UART_STOP_BIT_1;
+    break;
+    case STOP_BITS_2:
+        uart_stop_bit = UART_STOP_BIT_2;
+    break;
+    default:
+        uart_stop_bit = UART_STOP_BIT_1;
+    break;
+    }
+
+    /* Check parity */
+    switch (cfg->parity)
+    {
+    case PARITY_NONE:
+        uart_parity = UART_PARITY_NONE;
+    break;
+    case PARITY_ODD:
+        uart_parity = UART_PARITY_ODD;
+    break;
+    case PARITY_EVEN:
+        uart_parity = UART_PARITY_EVEN;
+    break;
+    default:
+        uart_parity = UART_PARITY_NONE;
+    break;
+    }
+
+    /* Set line configuration. */
+    UART_SetLineConfig(uart_base, cfg->baud_rate, uart_word_len, uart_parity, uart_stop_bit);
+
+    return RT_EOK;
+}
+
+/**
+ * Initialize uart port
+ */
+static rt_err_t nu_uart_init(struct rt_serial_device *serial)
+{
+    /* Get base address of uart register */
+    UART_T *uart_base = ((nu_uart_t)serial)->uart_base;
+
+//    nu_sys_ip_reset(((nu_uart_t)serial)->rstidx);
+
+    /* Open Uart and set UART Baudrate */
+    UART_Open(uart_base, serial->config->baud_rate);
+
+    if (nu_uart_configure(serial, &serial->config) != RT_EOK)
+    {
+        return -RT_ERROR;
+    }
+
+    return RT_EOK;
+}
+
+static rt_err_t nu_uart_control(struct rt_serial_device *serial, int cmd, void *arg)
+{
+    nu_uart_t psNuUart = (nu_uart_t)serial;
+    rt_err_t result = RT_EOK;
+    rt_uint32_t flag;
+    rt_ubase_t ctrl_arg = (rt_ubase_t)arg;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    /* Get base address of uart register */
+    UART_T *uart_base = psNuUart->uart_base;
+
+    switch (cmd) {
+    case RT_DEVICE_CTRL_OPEN:
+        /* Enable interrupt. */
+        rt_hw_interrupt_umask(((nu_uart_t)serial)->irqn);
+    break;
+    case RT_DEVICE_CTRL_CLR_INT:
+        /* disable interrupt */
+        if (ctrl_arg & RT_DEVICE_FLAG_INT_TX) {
+            UART_DISABLE_INT(uart_base, UART_INTEN_THREIEN_Msk);
+        }
+        if (ctrl_arg & RT_DEVICE_FLAG_INT_RX) {
+            flag = UART_INTEN_RDAIEN_Msk | UART_INTEN_RXTOIEN_Msk | UART_INTEN_TOCNTEN_Msk;
+            UART_DISABLE_INT(uart_base, flag);
+        }
+
+#ifdef RT_SERIAL_USING_DMA
+        /* disable DMA */
+#endif
+    break;
+    case RT_DEVICE_CTRL_SET_INT:
+        /* enable interrupt */
+        if (ctrl_arg & RT_DEVICE_FLAG_INT_TX) {
+            UART_ENABLE_INT(uart_base, UART_INTEN_THREIEN_Msk);
+        }
+        if (ctrl_arg & RT_DEVICE_FLAG_INT_RX) {
+            flag = UART_INTEN_RDAIEN_Msk | UART_INTEN_RXTOIEN_Msk | UART_INTEN_TOCNTEN_Msk;
+            UART_ENABLE_INT(uart_base, flag);
+        }
+    break;
+    case RT_DEVICE_CTRL_CONFIG:
+#ifdef RT_SERIAL_USING_DMA
+#endif
+    break;
+    case RT_DEVICE_CTRL_CLOSE:
+        /* disable interrupt */
+        rt_hw_interrupt_mask(psNuUart->irqn);
+
+        /* Close UART port */
+        UART_Close(uart_base);
+    break;
+    default :
+    break;
+    }
+    return RT_EOK;
+}
+
+static int nu_uart_putc(struct rt_serial_device *serial, char c)
+{
+    UART_T *uart_base;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    /* Get base address of uart register */
+    uart_base = ((nu_uart_t)serial)->uart_base;
+    /* Waiting if TX-FIFO is full. */
+    while (UART_IS_TX_FULL(uart_base));
+    /* Put char into TX-FIFO */
+    UART_WRITE(uart_base, c);
+    return 1;
+}
+
+static int nu_uart_getc(struct rt_serial_device *serial)
+{
+    int ch;
+    UART_T *uart_base;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    /* Get base address of uart register */
+    uart_base = ((nu_uart_t)serial)->uart_base;
+
+    /* Return failure if RX-FIFO is empty. */
+    if (UART_GET_RX_EMPTY(uart_base)) {
+        return -1;
+    }
+    /* Get char from RX-FIFO */
+    ch = UART_READ(uart_base);
+
+    return ch;
+}
+
+static int nu_uart_flush(struct rt_serial_device *serial)
+{
+    UART_T *uart_base;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    /* Get base address of uart register */
+    uart_base = ((nu_uart_t)serial)->uart_base;
+    while(!UART_IS_TX_EMPTY(uart_base)){;}
+
+    return 1;
+}
+
+static void nu_start_tx(struct rt_serial_device *serial)
+{
+    UART_T *uart_base;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart_base = ((nu_uart_t)serial)->uart_base;
+
+    /* enable interrupt */
+    UART_ENABLE_INT(uart_base, UART_INTEN_THREIEN_Msk);
+}
+
+static void nu_stop_tx(struct rt_serial_device *serial)
+{
+    UART_T *uart_base;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart_base = ((nu_uart_t)serial)->uart_base;
+
+    /* disable interrupt */
+    UART_DISABLE_INT(uart_base, UART_INTEN_THREIEN_Msk);
+}
+
+static void nu_enable_interrupt(struct rt_serial_device *serial)
+{
+    RT_ASSERT(serial != RT_NULL);
+
+    rt_hw_interrupt_umask(((nu_uart_t)serial)->irqn);
+}
+
+static void nu_disable_interrupt(struct rt_serial_device *serial)
+{
+    RT_ASSERT(serial != RT_NULL);
+
+    rt_hw_interrupt_mask(((nu_uart_t)serial)->irqn);
+}
+
+static const struct rt_uart_ops nu_uart_ops =
+{
+    .init = nu_uart_init,
+    .configure = nu_uart_configure,
+    .control = nu_uart_control,
+    .putc = nu_uart_putc,
+    .getc = nu_uart_getc,
+    .flush = nu_uart_flush,
+    .start_tx = nu_start_tx,
+    .stop_tx = nu_stop_tx,
+    .enable_interrupt = nu_enable_interrupt,
+    .disable_interrupt = nu_disable_interrupt,
+};
+
+int rt_hw_uart_init(void)
+{
+    rt_size_t obj_num = sizeof(nu_uart_arr) / sizeof(struct nu_uart);
+    rt_err_t result = 0;
+    int i;
+
+    for (i = 0; i < obj_num; i++)
+    {
+        /* init UART object */
+        nu_uart_arr[i].dev.ops    = &nu_uart_ops;
+
+        rt_hw_interrupt_install(nu_uart_arr[i].irqn, nu_uart_isr, &nu_uart_arr[i], nu_uart_arr[i].name);
+
+        nu_sys_ipclk_enable(nu_uart_arr[i].clkidx);
+
+        /* register UART device */
+        result = rt_hw_serial_register(&nu_uart_arr[i].dev, nu_uart_arr[i].name,
+                                       RT_DEVICE_FLAG_RDWR
+                                       | RT_DEVICE_FLAG_INT_RX
+                                       | RT_DEVICE_FLAG_INT_TX
+                                       , NULL);
+        RT_ASSERT(result == RT_EOK);
+    }
+
+    return result;
+}
+
+#endif /* RT_USING_SERIAL */

bsp/nuvoton/libraries/nuc980/rtt_port/drv_uartX.h

@@ -0,0 +1,79 @@
+/*
+ * Copyright (c) 2006-2023, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2023-02-01     THEWON       first version for serialX
+ */
+
+#ifndef __DRV_UART_H__
+#define __DRV_UART_H__
+
+#include <rtthread.h>
+#include "rtdevice.h"
+#include <rthw.h>
+#include <drv_common.h>
+#include "NuMicro.h"
+#include <drv_sys.h>
+
+typedef void(*uart_isr_cb)(int, void*);
+
+/* Private typedef --------------------------------------------------------------*/
+struct nu_uart
+{
+    struct rt_serial_device dev;
+    char *name;
+    UART_T *uart_base;
+    IRQn_Type irqn;
+    E_SYS_IPRST rstidx;
+    E_SYS_IPCLK clkidx;
+
+#if defined(RT_SERIAL_USING_DMA)
+    uint32_t dma_flag;
+    int16_t pdma_perp_tx;
+    int8_t  pdma_chanid_tx;
+
+    int16_t pdma_perp_rx;
+    int8_t  pdma_chanid_rx;
+    int32_t rx_write_offset;
+    int32_t rxdma_trigger_len;
+
+    nu_pdma_desc_t pdma_rx_desc;
+#endif
+
+};
+typedef struct nu_uart *nu_uart_t;
+
+#if defined(BSP_USING_UART0)
+#ifndef UART0_CONFIG
+#define UART0_CONFIG                                                \
+    {                                                               \
+        .name = "uart0",                                            \
+        .uart_base = UART0,                                         \
+        .irqn = IRQ_UART0,                                          \
+        .rstidx = UART0RST,                                         \
+        .clkidx = UART0CKEN,                                        \
+    }
+#endif /* UART0_CONFIG */
+
+#endif /* BSP_USING_UART0 */
+
+#if defined(BSP_USING_UART1)
+#ifndef UART1_CONFIG
+#define UART1_CONFIG                                                \
+    {                                                               \
+        .name = "uart1",                                            \
+        .uart_base = UART1,                                         \
+        .irqn = IRQ_UART1,                                          \
+        .rstidx = UART1RST,                                         \
+        .clkidx = UART1CKEN,                                        \
+    }
+#endif /* UART1_CONFIG */
+
+#endif /* BSP_USING_UART1 */
+
+int rt_hw_uart_init(void);
+
+#endif  /* __DRV_UART_H__ */

bsp/renesas/libraries/HAL_Drivers/SConscript

@@ -12,6 +12,8 @@ src = Split("""
 if GetDepend(['BSP_USING_UART']):
     if GetDepend(['RT_USING_SERIAL_V2']):
         src += ['drv_usart_v2.c']
+    elif GetDepend(['RT_USING_SERIAL_X']):
+        src += ['drv_usartX.c']
     else:
         print("\nThe current project does not support serial-v1\n")
         Return('group')

bsp/renesas/libraries/HAL_Drivers/drv_usartX.c

@@ -0,0 +1,625 @@
+/*
+ * Copyright (c) 2006-2022, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author            Notes
+ * 2021-07-29     KyleChan          first version
+ * 2022-06-08     THEWON            first version for serialX
+ */
+
+#include <drv_usartX.h>
+
+#ifdef RT_USING_SERIAL_X
+
+//#define DRV_DEBUG
+#define DBG_TAG              "drv.usart"
+#ifdef DRV_DEBUG
+    #define DBG_LVL               DBG_LOG
+#else
+    #define DBG_LVL               DBG_INFO
+#endif /* DRV_DEBUG */
+#include <rtdbg.h>
+
+/* SCI SCR register bit masks */
+#define SCI_SCR_TEIE_MASK                       (0x04U) ///< Transmit End Interrupt Enable
+#define SCI_SCR_RE_MASK                         (0x10U) ///< Receive Enable
+#define SCI_SCR_TE_MASK                         (0x20U) ///< Transmit Enable
+#define SCI_SCR_RIE_MASK                        (0x40U) ///< Receive Interrupt Enable
+#define SCI_SCR_TIE_MASK                        (0x80U) ///< Transmit Interrupt Enable
+
+static struct ra_uart_config uart_config[] =
+{
+#ifdef BSP_USING_UART0
+    UART0_CONFIG,
+#endif
+
+#ifdef BSP_USING_UART1
+    UART1_CONFIG,
+#endif
+
+#ifdef BSP_USING_UART2
+    UART2_CONFIG,
+#endif
+
+#ifdef BSP_USING_UART3
+    UART3_CONFIG,
+#endif
+
+#ifdef BSP_USING_UART4
+    UART4_CONFIG,
+#endif
+
+#ifdef BSP_USING_UART5
+    UART5_CONFIG,
+#endif
+
+#ifdef BSP_USING_UART6
+    UART6_CONFIG,
+#endif
+
+#ifdef BSP_USING_UART7
+    UART7_CONFIG,
+#endif
+
+#ifdef BSP_USING_UART8
+    UART8_CONFIG,
+#endif
+
+#ifdef BSP_USING_UART9
+    UART9_CONFIG,
+#endif
+};
+
+enum
+{
+#ifdef BSP_USING_UART0
+    UART0_INDEX,
+#endif
+
+#ifdef BSP_USING_UART1
+    UART1_INDEX,
+#endif
+
+#ifdef BSP_USING_UART2
+    UART2_INDEX,
+#endif
+
+#ifdef BSP_USING_UART3
+    UART3_INDEX,
+#endif
+
+#ifdef BSP_USING_UART4
+    UART4_INDEX,
+#endif
+
+#ifdef BSP_USING_UART5
+    UART5_INDEX,
+#endif
+
+#ifdef BSP_USING_UART6
+    UART6_INDEX,
+#endif
+
+#ifdef BSP_USING_UART7
+    UART7_INDEX,
+#endif
+
+#ifdef BSP_USING_UART8
+    UART8_INDEX,
+#endif
+
+#ifdef BSP_USING_UART9
+    UART9_INDEX,
+#endif
+};
+
+static struct ra_uart uart_obj[sizeof(uart_config) / sizeof(uart_config[0])] = {0};
+
+static void ra_uart_get_config(void)
+{
+    struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT;
+
+#ifdef BSP_USING_UART0
+    uart_obj[UART0_INDEX].serial.config = config;
+#endif
+
+#ifdef BSP_USING_UART1
+    uart_obj[UART1_INDEX].serial.config = config;
+#endif
+
+#ifdef BSP_USING_UART2
+    uart_obj[UART2_INDEX].serial.config = config;
+#endif
+
+#ifdef BSP_USING_UART3
+    uart_obj[UART3_INDEX].serial.config = config;
+#endif
+
+#ifdef BSP_USING_UART4
+    uart_obj[UART4_INDEX].serial.config = config;
+#endif
+
+#ifdef BSP_USING_UART6
+    uart_obj[UART6_INDEX].serial.config = config;
+#endif
+
+#ifdef BSP_USING_UART7
+    uart_obj[UART7_INDEX].serial.config = config;
+    uart_config[UART7_INDEX].uart_cfg = g_uart7_cfg;
+#endif
+
+#ifdef BSP_USING_UART8
+    uart_obj[UART8_INDEX].serial.config = config;
+#endif
+
+#ifdef BSP_USING_UART9
+    uart_obj[UART9_INDEX].serial.config = config;
+#endif
+}
+
+/*
+ * UART interface
+ */
+static rt_err_t ra_uart_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
+{
+    struct ra_uart *uart;
+    RT_ASSERT(serial != RT_NULL);
+    RT_ASSERT(cfg != RT_NULL);
+
+    fsp_err_t err = FSP_SUCCESS;
+
+    uart = rt_container_of(serial, struct ra_uart, serial);
+    RT_ASSERT(uart != RT_NULL);
+
+    if (cfg->data_bits == DATA_BITS_7)
+    {
+        uart->uart_config->uart_cfg.data_bits = UART_DATA_BITS_7;
+    }
+    else if (cfg->data_bits == DATA_BITS_8)
+    {
+        uart->uart_config->uart_cfg.data_bits = UART_DATA_BITS_8;
+    }
+    else if (cfg->data_bits == DATA_BITS_9)
+    {
+        uart->uart_config->uart_cfg.data_bits = UART_DATA_BITS_9;
+    }
+
+    if (cfg->stop_bits == STOP_BITS_1)
+    {
+        uart->uart_config->uart_cfg.stop_bits = UART_STOP_BITS_1;
+    }
+    else if (cfg->stop_bits == STOP_BITS_2)
+    {
+        uart->uart_config->uart_cfg.stop_bits = UART_STOP_BITS_2;
+    }
+
+    if (cfg->parity == PARITY_NONE)
+    {
+        uart->uart_config->uart_cfg.parity = UART_PARITY_OFF;
+    }
+    else if (cfg->parity == PARITY_ODD)
+    {
+        uart->uart_config->uart_cfg.parity = UART_PARITY_ODD;
+    }
+    else if (cfg->parity == PARITY_EVEN)
+    {
+        uart->uart_config->uart_cfg.parity = UART_PARITY_EVEN;
+    }
+
+    err = R_SCI_UART_Open(uart->uart_config->p_api_ctrl, &uart->uart_config->uart_cfg);
+    if (FSP_SUCCESS != err)
+    {
+        return -RT_ERROR;
+    }
+
+    return RT_EOK;
+}
+
+/*
+ * Initialize UART interface
+ */
+static rt_err_t ra_uart_init(struct rt_serial_device *serial)
+{
+    if (ra_uart_configure(serial, &serial->config) != RT_EOK)
+    {
+        return -RT_ERROR;
+    }
+
+    return RT_EOK;
+}
+
+static rt_err_t ra_uart_control(struct rt_serial_device *serial, int cmd, void *arg)
+{
+    struct ra_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct ra_uart, serial);
+
+    switch (cmd) {
+    case RT_DEVICE_CTRL_OPEN:
+        uart->intTxing = RT_FALSE;
+    break;
+    case RT_DEVICE_CTRL_CLOSE:
+        R_SCI_UART_Close(uart->uart_config->p_api_ctrl);
+    break;
+    case RT_DEVICE_CTRL_CLR_INT:
+        /* disable interrupt */
+    break;
+    case RT_DEVICE_CTRL_SET_INT:
+        /* enable interrupt */
+    break;
+    /* USART config */
+    case RT_DEVICE_CTRL_CONFIG :
+    break;
+    default :
+    break;
+    }
+    return RT_EOK;
+}
+
+static int ra_uart_putc(struct rt_serial_device *serial, char c, rt_bool_t useint)
+{
+    struct ra_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct ra_uart, serial);
+
+    sci_uart_instance_ctrl_t *p_ctrl = (sci_uart_instance_ctrl_t *)uart->uart_config->p_api_ctrl;
+
+    while ((p_ctrl->p_reg->SSR_b.TDRE) == 0);
+    p_ctrl->p_reg->TDR = c;
+    if (useint) {
+        p_ctrl->p_reg->SCR |= SCI_SCR_TE_MASK;
+        p_ctrl->p_reg->SCR |= SCI_SCR_TIE_MASK;
+    }
+
+    return RT_EOK;
+}
+
+static int ra_uart_getc(struct rt_serial_device *serial)
+{
+    int ch;
+    struct ra_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct ra_uart, serial);
+
+    sci_uart_instance_ctrl_t *p_ctrl = (sci_uart_instance_ctrl_t *)uart->uart_config->p_api_ctrl;
+
+    ch = -1;
+    if ((p_ctrl->p_reg->SSR_b.RDRF) == 1) {
+        ch = p_ctrl->p_reg->RDR & 0xFF;
+        p_ctrl->p_reg->SSR_b.RDRF = 0;
+    }
+
+    return ch;
+}
+
+static int ra_uart_flush(struct rt_serial_device *serial)
+{
+    struct ra_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct ra_uart, serial);
+
+    sci_uart_instance_ctrl_t *p_ctrl = (sci_uart_instance_ctrl_t *)uart->uart_config->p_api_ctrl;
+
+    while (!((p_ctrl->p_reg->SSR_b.TEND) == 1 && (p_ctrl->p_reg->SSR_b.TDRE) == 1));
+
+    return 0;
+}
+
+rt_bool_t ra_int_txing(struct rt_serial_device *serial)
+{
+    struct ra_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct ra_uart, serial);
+
+    return uart->intTxing;
+}
+
+static void ra_start_tx(struct rt_serial_device *serial, rt_uint8_t ch)
+{
+    struct ra_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct ra_uart, serial);
+
+    sci_uart_instance_ctrl_t *p_ctrl = (sci_uart_instance_ctrl_t *)uart->uart_config->p_api_ctrl;
+
+    uart->intTxing = RT_TRUE;
+    p_ctrl->p_reg->SCR &= ~(SCI_SCR_TIE_MASK | SCI_SCR_TEIE_MASK);
+    p_ctrl->p_reg->TDR = ch;
+    p_ctrl->p_reg->SCR |= SCI_SCR_TE_MASK;
+    /* Trigger a TXI interrupt. This triggers the transfer instance or a TXI interrupt if the transfer instance is
+     * not used. */
+    p_ctrl->p_reg->SCR |= SCI_SCR_TIE_MASK;
+}
+
+static void ra_stop_tx(struct rt_serial_device *serial)
+{
+    struct ra_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct ra_uart, serial);
+
+    sci_uart_instance_ctrl_t *p_ctrl = (sci_uart_instance_ctrl_t *)uart->uart_config->p_api_ctrl;
+
+    p_ctrl->p_reg->SCR &= ~(SCI_SCR_TIE_MASK | SCI_SCR_TEIE_MASK);
+    uart->intTxing = RT_FALSE;
+}
+
+#ifdef BSP_USING_UART0
+void user_uart0_callback(uart_callback_args_t *p_args)
+{
+    rt_interrupt_enter();
+
+    struct rt_serial_device *serial = &uart_obj[UART0_INDEX].serial;
+    RT_ASSERT(serial != RT_NULL);
+
+    if (UART_EVENT_RX_CHAR == p_args->event)
+    {
+        struct rt_serial_rx_fifo *rx_fifo;
+        rx_fifo = (struct rt_serial_rx_fifo *) serial->serial_rx;
+        RT_ASSERT(rx_fifo != RT_NULL);
+
+        rt_ringbuffer_putchar(&(rx_fifo->rb), (rt_uint8_t)p_args->data);
+
+        rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
+    }
+
+    rt_interrupt_leave();
+}
+#endif
+
+#ifdef BSP_USING_UART1
+void user_uart1_callback(uart_callback_args_t *p_args)
+{
+    rt_interrupt_enter();
+
+    struct rt_serial_device *serial = &uart_obj[UART1_INDEX].serial;
+    RT_ASSERT(serial != RT_NULL);
+
+    if (UART_EVENT_RX_CHAR == p_args->event)
+    {
+        struct rt_serial_rx_fifo *rx_fifo;
+        rx_fifo = (struct rt_serial_rx_fifo *) serial->serial_rx;
+        RT_ASSERT(rx_fifo != RT_NULL);
+
+        rt_ringbuffer_putchar(&(rx_fifo->rb), (rt_uint8_t)p_args->data);
+
+        rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
+    }
+
+    rt_interrupt_leave();
+}
+#endif
+
+#ifdef BSP_USING_UART2
+void user_uart2_callback(uart_callback_args_t *p_args)
+{
+    rt_interrupt_enter();
+
+    struct rt_serial_device *serial = &uart_obj[UART2_INDEX].serial;
+    RT_ASSERT(serial != RT_NULL);
+
+    if (UART_EVENT_RX_CHAR == p_args->event)
+    {
+        struct rt_serial_rx_fifo *rx_fifo;
+        rx_fifo = (struct rt_serial_rx_fifo *) serial->serial_rx;
+        RT_ASSERT(rx_fifo != RT_NULL);
+
+        rt_ringbuffer_putchar(&(rx_fifo->rb), (rt_uint8_t)p_args->data);
+
+        rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
+    }
+
+    rt_interrupt_leave();
+}
+#endif
+
+#ifdef BSP_USING_UART3
+void user_uart3_callback(uart_callback_args_t *p_args)
+{
+    rt_interrupt_enter();
+
+    struct rt_serial_device *serial = &uart_obj[UART3_INDEX].serial;
+    RT_ASSERT(serial != RT_NULL);
+
+    if (UART_EVENT_RX_CHAR == p_args->event)
+    {
+        struct rt_serial_rx_fifo *rx_fifo;
+        rx_fifo = (struct rt_serial_rx_fifo *) serial->serial_rx;
+        RT_ASSERT(rx_fifo != RT_NULL);
+
+        rt_ringbuffer_putchar(&(rx_fifo->rb), (rt_uint8_t)p_args->data);
+
+        rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
+    }
+
+    rt_interrupt_leave();
+}
+#endif
+
+#ifdef BSP_USING_UART4
+void user_uart4_callback(uart_callback_args_t *p_args)
+{
+    rt_interrupt_enter();
+
+    struct rt_serial_device *serial = &uart_obj[UART4_INDEX].serial;
+    RT_ASSERT(serial != RT_NULL);
+
+    if (UART_EVENT_RX_CHAR == p_args->event)
+    {
+        struct rt_serial_rx_fifo *rx_fifo;
+        rx_fifo = (struct rt_serial_rx_fifo *) serial->serial_rx;
+        RT_ASSERT(rx_fifo != RT_NULL);
+
+        rt_ringbuffer_putchar(&(rx_fifo->rb), (rt_uint8_t)p_args->data);
+
+        rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
+    }
+
+    rt_interrupt_leave();
+}
+#endif
+
+#ifdef BSP_USING_UART5
+void user_uart5_callback(uart_callback_args_t *p_args)
+{
+    rt_interrupt_enter();
+
+    struct rt_serial_device *serial = &uart_obj[UART5_INDEX].serial;
+    RT_ASSERT(serial != RT_NULL);
+
+    if (UART_EVENT_RX_CHAR == p_args->event)
+    {
+        struct rt_serial_rx_fifo *rx_fifo;
+        rx_fifo = (struct rt_serial_rx_fifo *) serial->serial_rx;
+        RT_ASSERT(rx_fifo != RT_NULL);
+
+        rt_ringbuffer_putchar(&(rx_fifo->rb), (rt_uint8_t)p_args->data);
+
+        rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
+    }
+
+    rt_interrupt_leave();
+}
+#endif
+
+#ifdef BSP_USING_UART6
+void user_uart6_callback(uart_callback_args_t *p_args)
+{
+    rt_interrupt_enter();
+
+    struct rt_serial_device *serial = &uart_obj[UART6_INDEX].serial;
+    RT_ASSERT(serial != RT_NULL);
+
+    if (UART_EVENT_RX_CHAR == p_args->event)
+    {
+        struct rt_serial_rx_fifo *rx_fifo;
+        rx_fifo = (struct rt_serial_rx_fifo *) serial->serial_rx;
+        RT_ASSERT(rx_fifo != RT_NULL);
+
+        rt_ringbuffer_putchar(&(rx_fifo->rb), (rt_uint8_t)p_args->data);
+
+        rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
+    }
+
+    rt_interrupt_leave();
+}
+#endif
+
+#ifdef BSP_USING_UART7
+void user_uart7_callback(uart_callback_args_t *p_args)
+{
+    rt_interrupt_enter();
+
+    struct rt_serial_device *serial = &uart_obj[UART7_INDEX].serial;
+    RT_ASSERT(serial != RT_NULL);
+
+    if (UART_EVENT_RX_CHAR == p_args->event)
+    {
+        rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
+    } else if (UART_EVENT_TX_COMPLETE == p_args->event) {
+        rt_hw_serial_isr(serial, RT_SERIAL_EVENT_TX_DONE);
+    }
+
+    rt_interrupt_leave();
+}
+#endif
+
+#ifdef BSP_USING_UART8
+void user_uart8_callback(uart_callback_args_t *p_args)
+{
+    rt_interrupt_enter();
+
+    struct rt_serial_device *serial = &uart_obj[UART8_INDEX].serial;
+    RT_ASSERT(serial != RT_NULL);
+
+    if (UART_EVENT_RX_CHAR == p_args->event)
+    {
+        struct rt_serial_rx_fifo *rx_fifo;
+        rx_fifo = (struct rt_serial_rx_fifo *) serial->serial_rx;
+        RT_ASSERT(rx_fifo != RT_NULL);
+
+        rt_ringbuffer_putchar(&(rx_fifo->rb), (rt_uint8_t)p_args->data);
+
+        rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
+    }
+
+    rt_interrupt_leave();
+}
+#endif
+
+#ifdef BSP_USING_UART9
+void user_uart9_callback(uart_callback_args_t *p_args)
+{
+    rt_interrupt_enter();
+
+    struct rt_serial_device *serial = &uart_obj[UART9_INDEX].serial;
+    RT_ASSERT(serial != RT_NULL);
+
+    if (UART_EVENT_RX_CHAR == p_args->event)
+    {
+        struct rt_serial_rx_fifo *rx_fifo;
+        rx_fifo = (struct rt_serial_rx_fifo *) serial->serial_rx;
+        RT_ASSERT(rx_fifo != RT_NULL);
+
+        rt_ringbuffer_putchar(&(rx_fifo->rb), (rt_uint8_t)p_args->data);
+
+        rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
+    }
+
+    rt_interrupt_leave();
+}
+#endif
+
+static const struct rt_uart_ops ra_uart_ops =
+{
+    .init = ra_uart_init,
+    .configure = ra_uart_configure,
+    .control = ra_uart_control,
+    .putc = ra_uart_putc,
+    .getc = ra_uart_getc,
+    .flush = ra_uart_flush,
+    .is_int_txing = ra_int_txing,
+    .start_tx = ra_start_tx,
+    .stop_tx = ra_stop_tx,
+};
+
+
+int rt_hw_usart_init(void)
+{
+    rt_err_t result = 0;
+    rt_size_t obj_num = sizeof(uart_obj) / sizeof(struct ra_uart);
+
+    ra_uart_get_config();
+    for (int i = 0; i < obj_num; i++)
+    {
+        /* init UART object */
+        uart_obj[i].uart_config = &uart_config[i];
+        uart_obj[i].serial.ops = &ra_uart_ops;
+        /* register UART device */
+        result = rt_hw_serial_register(&uart_obj[i].serial,
+                                       uart_obj[i].uart_config->name,
+                                       RT_DEVICE_FLAG_RDWR |
+                                       RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_INT_TX,
+                                       NULL);
+        RT_ASSERT(result == RT_EOK);
+    }
+
+    return result;
+}
+
+#endif /* RT_USING_SERIAL_X */

bsp/renesas/libraries/HAL_Drivers/drv_usartX.h

@@ -0,0 +1,39 @@
+/*
+ * Copyright (c) 2006-2022, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author            Notes
+ * 2021-07-29     KyleChan          first version
+ * 2022-06-08     THEWON            first version for serialX
+ */
+
+#ifndef __DRV_USART_V2_H__
+#define __DRV_USART_V2_H__
+
+#include <rtthread.h>
+#include <rtdevice.h>
+#include <rthw.h>
+#include <drv_common.h>
+#include <drv_config.h>
+#include <hal_data.h>
+
+/* renesas config class */
+struct ra_uart_config
+{
+    const char *name;
+    uart_ctrl_t * p_api_ctrl;
+    uart_cfg_t  uart_cfg;
+};
+
+struct ra_uart
+{
+    struct rt_serial_device serial;
+    struct ra_uart_config *uart_config;
+    rt_bool_t intTxing;
+};
+
+int rt_hw_usart_init(void);
+
+#endif  /* __DRV_USART_H__ */

bsp/stm32/libraries/HAL_Drivers/SConscript

@@ -13,6 +13,8 @@ if GetDepend(['RT_USING_PIN']):
 if GetDepend(['RT_USING_SERIAL']):
     if GetDepend(['RT_USING_SERIAL_V2']):
         src += ['drv_usart_v2.c']
+    elif GetDepend(['RT_USING_SERIAL_X']):
+        src += ['drv_usartX.c']
     else:
         src += ['drv_usart.c']
 

bsp/stm32/libraries/HAL_Drivers/drv_usartX.c

@@ -0,0 +1,939 @@
+/*
+ * Copyright (c) 2006-2022, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2022-04-10     THEWON       first version for serialX
+ */
+
+#include "board.h"
+#include "drv_usartX.h"
+#include "drv_config.h"
+
+#ifdef RT_USING_SERIAL
+
+//#define DRV_DEBUG
+#define LOG_TAG             "drv.usart"
+#include <drv_log.h>
+
+#if !defined(BSP_USING_UART1) && !defined(BSP_USING_UART2) && !defined(BSP_USING_UART3) && \
+    !defined(BSP_USING_UART4) && !defined(BSP_USING_UART5) && !defined(BSP_USING_UART6) && \
+    !defined(BSP_USING_UART7) && !defined(BSP_USING_UART8) && !defined(BSP_USING_LPUART1)
+#error "Please define at least one BSP_USING_UARTx"
+/* this driver can be disabled at menuconfig -> RT-Thread Components -> Device Drivers */
+#endif
+
+#ifdef RT_SERIAL_USING_DMA
+static void stm32_dma_rx_config(struct rt_serial_device *serial);
+static void stm32_dma_tx_config(struct rt_serial_device *serial);
+#endif
+
+enum
+{
+#ifdef BSP_USING_UART1
+    UART1_INDEX,
+#endif
+#ifdef BSP_USING_UART2
+    UART2_INDEX,
+#endif
+#ifdef BSP_USING_UART3
+    UART3_INDEX,
+#endif
+#ifdef BSP_USING_UART4
+    UART4_INDEX,
+#endif
+#ifdef BSP_USING_UART5
+    UART5_INDEX,
+#endif
+#ifdef BSP_USING_UART6
+    UART6_INDEX,
+#endif
+#ifdef BSP_USING_UART7
+    UART7_INDEX,
+#endif
+#ifdef BSP_USING_UART8
+    UART8_INDEX,
+#endif
+#ifdef BSP_USING_LPUART1
+    LPUART1_INDEX,
+#endif
+};
+
+static struct stm32_uart_config uart_config[] =
+{
+#ifdef BSP_USING_UART1
+    UART1_CONFIG,
+#endif
+#ifdef BSP_USING_UART2
+    UART2_CONFIG,
+#endif
+#ifdef BSP_USING_UART3
+    UART3_CONFIG,
+#endif
+#ifdef BSP_USING_UART4
+    UART4_CONFIG,
+#endif
+#ifdef BSP_USING_UART5
+    UART5_CONFIG,
+#endif
+#ifdef BSP_USING_UART6
+    UART6_CONFIG,
+#endif
+#ifdef BSP_USING_UART7
+    UART7_CONFIG,
+#endif
+#ifdef BSP_USING_UART8
+    UART8_CONFIG,
+#endif
+#ifdef BSP_USING_LPUART1
+    LPUART1_CONFIG,
+#endif
+};
+
+static struct stm32_uart uart_obj[sizeof(uart_config) / sizeof(uart_config[0])] = {0};
+
+static rt_uint32_t stm32_uart_get_mask(rt_uint32_t word_length, rt_uint32_t parity)
+{
+    rt_uint32_t mask;
+    if (word_length == UART_WORDLENGTH_8B)
+    {
+        if (parity == UART_PARITY_NONE)
+        {
+            mask = 0x00FFU ;
+        }
+        else
+        {
+            mask = 0x007FU ;
+        }
+    }
+#ifdef UART_WORDLENGTH_9B
+    else if (word_length == UART_WORDLENGTH_9B)
+    {
+        if (parity == UART_PARITY_NONE)
+        {
+            mask = 0x01FFU ;
+        }
+        else
+        {
+            mask = 0x00FFU ;
+        }
+    }
+#endif
+#ifdef UART_WORDLENGTH_7B
+    else if (word_length == UART_WORDLENGTH_7B)
+    {
+        if (parity == UART_PARITY_NONE)
+        {
+            mask = 0x007FU ;
+        }
+        else
+        {
+            mask = 0x003FU ;
+        }
+    }
+    else
+    {
+        mask = 0x0000U;
+    }
+#endif
+    return mask;
+}
+
+static rt_err_t stm32_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
+{
+    struct stm32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+    RT_ASSERT(cfg != RT_NULL);
+
+    uart = rt_container_of(serial, struct stm32_uart, serial);
+    uart->handle.Instance          = uart->uart_config->Instance;
+    uart->handle.Init.BaudRate     = cfg->baud_rate;
+    uart->handle.Init.Mode         = UART_MODE_TX_RX;
+    uart->handle.Init.OverSampling = UART_OVERSAMPLING_16;
+
+    switch (cfg->flowcontrol)
+    {
+    case RT_SERIAL_FLOWCONTROL_NONE:
+        uart->handle.Init.HwFlowCtl = UART_HWCONTROL_NONE;
+        break;
+    case RT_SERIAL_FLOWCONTROL_CTSRTS:
+        uart->handle.Init.HwFlowCtl = UART_HWCONTROL_RTS_CTS;
+        break;
+    default:
+        uart->handle.Init.HwFlowCtl = UART_HWCONTROL_NONE;
+        break;
+    }
+
+    switch (cfg->data_bits)
+    {
+    case DATA_BITS_8:
+        if (cfg->parity == PARITY_ODD || cfg->parity == PARITY_EVEN)
+            uart->handle.Init.WordLength = UART_WORDLENGTH_9B;
+        else
+            uart->handle.Init.WordLength = UART_WORDLENGTH_8B;
+        break;
+    case DATA_BITS_9:
+        uart->handle.Init.WordLength = UART_WORDLENGTH_9B;
+        break;
+    default:
+        uart->handle.Init.WordLength = UART_WORDLENGTH_8B;
+        break;
+    }
+
+    switch (cfg->stop_bits)
+    {
+    case STOP_BITS_1:
+        uart->handle.Init.StopBits   = UART_STOPBITS_1;
+        break;
+    case STOP_BITS_2:
+        uart->handle.Init.StopBits   = UART_STOPBITS_2;
+        break;
+    default:
+        uart->handle.Init.StopBits   = UART_STOPBITS_1;
+        break;
+    }
+
+    switch (cfg->parity)
+    {
+    case PARITY_NONE:
+        uart->handle.Init.Parity     = UART_PARITY_NONE;
+        break;
+    case PARITY_ODD:
+        uart->handle.Init.Parity     = UART_PARITY_ODD;
+        break;
+    case PARITY_EVEN:
+        uart->handle.Init.Parity     = UART_PARITY_EVEN;
+        break;
+    default:
+        uart->handle.Init.Parity     = UART_PARITY_NONE;
+        break;
+    }
+
+    uart->uart_config->mask = stm32_uart_get_mask(uart->handle.Init.WordLength, uart->handle.Init.Parity);
+    if (HAL_UART_Init(&uart->handle) != HAL_OK)
+    {
+        return -RT_ERROR;
+    }
+
+    return RT_EOK;
+}
+
+static rt_err_t stm32_init(struct rt_serial_device *serial)
+{
+    if (stm32_configure(serial, &serial->config) != RT_EOK)
+    {
+        return -RT_ERROR;
+    }
+
+    return RT_EOK;
+}
+
+static rt_err_t stm32_control(struct rt_serial_device *serial, int cmd, void *arg)
+{
+    struct stm32_uart *uart;
+    rt_ubase_t ctrl_arg = (rt_ubase_t)arg;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct stm32_uart, serial);
+
+    switch (cmd) {
+    case RT_DEVICE_CTRL_OPEN:
+        __HAL_UART_DISABLE_IT(&(uart->handle), UART_IT_TXE);
+        UART_INSTANCE_CLEAR_FUNCTION(&(uart->handle), UART_FLAG_RXNE);
+        UART_INSTANCE_CLEAR_FUNCTION(&(uart->handle), UART_FLAG_TXE);
+        UART_INSTANCE_CLEAR_FUNCTION(&(uart->handle), UART_FLAG_TC);
+        /* enable interrupt */
+        HAL_NVIC_SetPriority(uart->uart_config->irq_type, 1, 0);
+        HAL_NVIC_EnableIRQ(uart->uart_config->irq_type);
+#ifdef RT_SERIAL_USING_DMA
+        uart->dmaTxing = RT_FALSE;
+#endif
+    break;
+    case RT_DEVICE_CTRL_CLOSE:
+        HAL_NVIC_DisableIRQ(uart->uart_config->irq_type);
+#ifdef RT_SERIAL_USING_DMA
+        HAL_NVIC_DisableIRQ(uart->uart_config->dma_conf_rx->dma_irq);
+        if (HAL_DMA_Abort(&(uart->dma_rx.handle)) != HAL_OK) {
+            RT_ASSERT(0);
+        }
+        if (HAL_DMA_DeInit(&(uart->dma_rx.handle)) != HAL_OK) {
+            RT_ASSERT(0);
+        }
+
+        HAL_NVIC_DisableIRQ(uart->uart_config->dma_conf_tx->dma_irq);
+        if (HAL_DMA_Abort(&(uart->dma_tx.handle)) != HAL_OK) {
+            RT_ASSERT(0);
+        }
+        if (HAL_DMA_DeInit(&(uart->dma_tx.handle)) != HAL_OK) {
+            RT_ASSERT(0);
+        }
+#endif
+        __HAL_UART_DISABLE_IT(&(uart->handle), UART_IT_RXNE);
+        __HAL_UART_DISABLE_IT(&(uart->handle), UART_IT_TXE);
+        if (HAL_UART_DeInit(&(uart->handle)) != HAL_OK ) {
+        }
+    break;
+    /* disable interrupt */
+    case RT_DEVICE_CTRL_CLR_INT:
+        /* disable interrupt */
+        if (ctrl_arg & RT_DEVICE_FLAG_INT_RX) {
+            __HAL_UART_DISABLE_IT(&(uart->handle), UART_IT_RXNE);
+        }
+
+#ifdef RT_SERIAL_USING_DMA
+        /* disable DMA */
+        if (ctrl_arg & RT_DEVICE_FLAG_DMA_RX) {
+            HAL_NVIC_DisableIRQ(uart->uart_config->dma_conf_rx->dma_irq);
+        }
+        if(ctrl_arg & RT_DEVICE_FLAG_DMA_TX) {
+            HAL_NVIC_DisableIRQ(uart->uart_config->dma_conf_tx->dma_irq);
+        }
+#endif
+    break;
+    /* enable interrupt */
+    case RT_DEVICE_CTRL_SET_INT:
+        /* enable rx irq */
+        if (ctrl_arg & RT_DEVICE_FLAG_INT_RX) {
+            __HAL_UART_ENABLE_IT(&(uart->handle), UART_IT_RXNE);
+        }
+    break;
+#ifdef RT_SERIAL_USING_DMA
+    case RT_DEVICE_CTRL_CONFIG:
+        if (ctrl_arg & RT_DEVICE_FLAG_DMA_RX) {
+            stm32_dma_rx_config(serial);
+        } else if (ctrl_arg & RT_DEVICE_FLAG_DMA_TX) {
+            stm32_dma_tx_config(serial);
+        }
+    break;
+#endif
+    default :
+    break;
+    }
+    return RT_EOK;
+}
+
+static int stm32_putc(struct rt_serial_device *serial, char c)
+{
+    struct stm32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct stm32_uart, serial);
+
+    while (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_TXE) == RESET);
+    UART_INSTANCE_CLEAR_FUNCTION(&(uart->handle), UART_FLAG_TC);
+#if defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32WL) || defined(SOC_SERIES_STM32F7) || defined(SOC_SERIES_STM32F0) \
+    || defined(SOC_SERIES_STM32L0) || defined(SOC_SERIES_STM32G0) || defined(SOC_SERIES_STM32H7) \
+    || defined(SOC_SERIES_STM32G4) || defined(SOC_SERIES_STM32MP1) || defined(SOC_SERIES_STM32WB) || defined(SOC_SERIES_STM32F3)
+    uart->handle.Instance->TDR = c;
+#else
+    uart->handle.Instance->DR = c;
+#endif
+    return 1;
+}
+
+static int stm32_getc(struct rt_serial_device *serial)
+{
+    int ch = -1;
+    struct stm32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct stm32_uart, serial);
+
+    if (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_RXNE) == RESET)
+    {
+        return -1;
+    }
+#if defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32WL) || defined(SOC_SERIES_STM32F7) || defined(SOC_SERIES_STM32F0) \
+    || defined(SOC_SERIES_STM32L0) || defined(SOC_SERIES_STM32G0) || defined(SOC_SERIES_STM32H7) \
+    || defined(SOC_SERIES_STM32G4) || defined(SOC_SERIES_STM32MP1) || defined(SOC_SERIES_STM32WB)|| defined(SOC_SERIES_STM32F3)
+    ch = uart->handle.Instance->RDR & uart->uart_config->mask;
+#else
+    ch = uart->handle.Instance->DR & uart->uart_config->mask;
+#endif
+    return ch;
+}
+
+static int stm32_flush(struct rt_serial_device *serial)
+{
+    struct stm32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct stm32_uart, serial);
+    while (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_TC) == RESET);
+
+    return 1;
+}
+
+static void stm32_start_tx(struct rt_serial_device *serial)
+{
+    struct stm32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct stm32_uart, serial);
+    __HAL_UART_ENABLE_IT(&(uart->handle), UART_IT_TXE);
+}
+
+static void stm32_stop_tx(struct rt_serial_device *serial)
+{
+    struct stm32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct stm32_uart, serial);
+    __HAL_UART_DISABLE_IT(&(uart->handle), UART_IT_TXE);
+}
+
+#ifdef RT_SERIAL_USING_DMA
+static rt_bool_t stm32_is_dma_txing(struct rt_serial_device *serial)
+{
+    struct stm32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct stm32_uart, serial);
+
+    return uart->dmaTxing;  //RT_FALSE;
+}
+
+static void stm32_start_dma_tx(struct rt_serial_device *serial, rt_uint8_t *buf, rt_size_t size)
+{
+    struct stm32_uart *uart;
+    HAL_StatusTypeDef status;
+    DMA_HandleTypeDef *hdma;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct stm32_uart, serial);
+
+    do {        // may fallin dead loop
+        status = HAL_UART_Transmit_DMA(&uart->handle, buf, size);
+    } while (status != HAL_OK);
+    uart->dmaTxing = RT_TRUE;
+}
+
+static void stm32_stop_dma_tx(struct rt_serial_device *serial)
+{
+    struct stm32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct stm32_uart, serial);
+
+    if ((uart->dma_tx.handle.Instance->CR & DMA_SxCR_EN) == DMA_SxCR_EN) {
+        return;
+    }
+    __HAL_DMA_DISABLE(&uart->dma_tx.handle);
+    uart->dmaTxing = RT_FALSE;
+}
+#endif
+
+static void stm32_enable_interrupt(struct rt_serial_device *serial)
+{
+    struct stm32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct stm32_uart, serial);
+
+    HAL_NVIC_EnableIRQ(uart->uart_config->irq_type);
+#ifdef RT_SERIAL_USING_DMA
+    if (uart->uart_dma_flag) {
+        HAL_NVIC_EnableIRQ(uart->uart_config->dma_conf_rx->dma_irq);
+    }
+#endif
+}
+
+static void stm32_disable_interrupt(struct rt_serial_device *serial)
+{
+    struct stm32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+
+    uart = rt_container_of(serial, struct stm32_uart, serial);
+
+    HAL_NVIC_DisableIRQ(uart->uart_config->irq_type);
+#ifdef RT_SERIAL_USING_DMA
+    if (uart->uart_dma_flag) {
+        HAL_NVIC_DisableIRQ(uart->uart_config->dma_conf_rx->dma_irq);
+    }
+#endif
+}
+
+/**
+ * Uart common interrupt process. This need add to uart ISR.
+ *
+ * @param serial serial device
+ */
+static void uart_isr(struct rt_serial_device *serial)
+{
+    struct stm32_uart *uart;
+#ifdef RT_SERIAL_USING_DMA
+    rt_size_t dma_cnt;
+#endif
+
+    RT_ASSERT(serial != RT_NULL);
+    uart = rt_container_of(serial, struct stm32_uart, serial);
+
+    /* UART in mode Receiver -------------------------------------------------*/
+    if ((__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_RXNE) != RESET) &&
+        (__HAL_UART_GET_IT_SOURCE(&(uart->handle), UART_IT_RXNE) != RESET))
+    {
+        rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
+    }
+    if ((__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_TXE) != RESET) &&
+        (__HAL_UART_GET_IT_SOURCE(&(uart->handle), UART_IT_TXE) != RESET))
+    {
+        rt_hw_serial_isr(serial, RT_SERIAL_EVENT_TX_DONE);
+    }
+#ifdef RT_SERIAL_USING_DMA
+    else if ((uart->uart_dma_flag) && (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_IDLE) != RESET)
+             && (__HAL_UART_GET_IT_SOURCE(&(uart->handle), UART_IT_IDLE) != RESET))
+    {
+        __HAL_UART_CLEAR_IDLEFLAG(&uart->handle);
+        dma_cnt = RT_SERIAL_DMA_BUFSZ - __HAL_DMA_GET_COUNTER(&(uart->dma_rx.handle));
+
+        rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_DMADONE | (dma_cnt << 8));
+    }
+    else if (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_TC) &&
+            (__HAL_UART_GET_IT_SOURCE(&(uart->handle), UART_IT_TC) != RESET))
+    {
+        if ((serial->parent.open_flag & RT_DEVICE_FLAG_DMA_TX) != 0)
+        {
+            HAL_UART_IRQHandler(&(uart->handle));
+        }
+    }
+#endif
+    else
+    {
+        if (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_ORE) != RESET)
+        {
+            __HAL_UART_CLEAR_OREFLAG(&uart->handle);
+        }
+        if (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_NE) != RESET)
+        {
+            __HAL_UART_CLEAR_NEFLAG(&uart->handle);
+        }
+        if (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_FE) != RESET)
+        {
+            __HAL_UART_CLEAR_FEFLAG(&uart->handle);
+        }
+        if (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_PE) != RESET)
+        {
+            __HAL_UART_CLEAR_PEFLAG(&uart->handle);
+        }
+#if !defined(SOC_SERIES_STM32L4) && !defined(SOC_SERIES_STM32WL) && !defined(SOC_SERIES_STM32F7) && !defined(SOC_SERIES_STM32F0) \
+    && !defined(SOC_SERIES_STM32L0) && !defined(SOC_SERIES_STM32G0) && !defined(SOC_SERIES_STM32H7) \
+    && !defined(SOC_SERIES_STM32G4) && !defined(SOC_SERIES_STM32MP1) && !defined(SOC_SERIES_STM32WB)
+#ifdef SOC_SERIES_STM32F3
+        if (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_LBDF) != RESET)
+        {
+            UART_INSTANCE_CLEAR_FUNCTION(&(uart->handle), UART_FLAG_LBDF);
+        }
+#else
+        if (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_LBD) != RESET)
+        {
+            UART_INSTANCE_CLEAR_FUNCTION(&(uart->handle), UART_FLAG_LBD);
+        }
+#endif
+#endif
+        if (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_CTS) != RESET)
+        {
+            UART_INSTANCE_CLEAR_FUNCTION(&(uart->handle), UART_FLAG_CTS);
+        }
+//        if (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_TXE) != RESET)
+//        {
+//            UART_INSTANCE_CLEAR_FUNCTION(&(uart->handle), UART_FLAG_TXE);
+//        }
+//        if (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_TC) != RESET)
+//        {
+//            UART_INSTANCE_CLEAR_FUNCTION(&(uart->handle), UART_FLAG_TC);
+//        }
+//        if (__HAL_UART_GET_FLAG(&(uart->handle), UART_FLAG_RXNE) != RESET)
+//        {
+//            UART_INSTANCE_CLEAR_FUNCTION(&(uart->handle), UART_FLAG_RXNE);
+//        }
+    }
+}
+
+#ifdef RT_SERIAL_USING_DMA
+static void dma_isr(struct rt_serial_device *serial)
+{
+    struct stm32_uart *uart;
+    rt_size_t dma_cnt;
+
+    RT_ASSERT(serial != RT_NULL);
+    uart = rt_container_of(serial, struct stm32_uart, serial);
+
+    if ((__HAL_DMA_GET_IT_SOURCE(&(uart->dma_rx.handle), DMA_IT_TC) != RESET) ||
+        (__HAL_DMA_GET_IT_SOURCE(&(uart->dma_rx.handle), DMA_IT_HT) != RESET))
+    {
+        dma_cnt = RT_SERIAL_DMA_BUFSZ - __HAL_DMA_GET_COUNTER(&(uart->dma_rx.handle));
+
+        rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_DMADONE | (dma_cnt << 8));
+    }
+}
+#endif
+
+#if defined(BSP_USING_UART1)
+void USART1_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    uart_isr(&(uart_obj[UART1_INDEX].serial));
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART1_RX_USING_DMA)
+void UART1_DMA_RX_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    HAL_DMA_IRQHandler(&uart_obj[UART1_INDEX].dma_rx.handle);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_UART1_RX_USING_DMA) */
+#if defined(RT_SERIAL_USING_DMA) && defined(BSP_UART1_TX_USING_DMA)
+void UART1_DMA_TX_IRQHandler(void)
+{
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    HAL_DMA_IRQHandler(&uart_obj[UART1_INDEX].dma_tx.handle);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif /* defined(RT_SERIAL_USING_DMA) && defined(BSP_UART1_TX_USING_DMA) */
+#endif /* BSP_USING_UART1 */
+
+#ifdef RT_SERIAL_USING_DMA
+static void stm32_uart_get_dma_config(void)
+{
+#ifdef BSP_USING_UART1
+    uart_obj[UART1_INDEX].uart_dma_flag = 0;
+#ifdef BSP_UART1_RX_USING_DMA
+    uart_obj[UART1_INDEX].uart_dma_flag |= RT_DEVICE_FLAG_DMA_RX;
+    static struct dma_config uart1_dma_rx = UART1_DMA_RX_CONFIG;
+    uart_config[UART1_INDEX].dma_conf_rx = &uart1_dma_rx;
+#endif
+#ifdef BSP_UART1_TX_USING_DMA
+    uart_obj[UART1_INDEX].uart_dma_flag |= RT_DEVICE_FLAG_DMA_TX;
+    static struct dma_config uart1_dma_tx = UART1_DMA_TX_CONFIG;
+    uart_config[UART1_INDEX].dma_conf_tx = &uart1_dma_tx;
+#endif
+#endif
+}
+
+static void stm32_dma_rx_config(struct rt_serial_device *serial)
+{
+    DMA_HandleTypeDef *DMA_Handle;
+    struct dma_config *dma_config;
+    struct stm32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+    uart = rt_container_of(serial, struct stm32_uart, serial);
+
+    DMA_Handle = &uart->dma_rx.handle;
+    dma_config = uart->uart_config->dma_conf_rx;
+
+    LOG_D("%s dma config start", uart->uart_config->name);
+
+    {
+        rt_uint32_t tmpreg = 0x00U;
+#if defined(SOC_SERIES_STM32F1) || defined(SOC_SERIES_STM32F0) || defined(SOC_SERIES_STM32G0) \
+    || defined(SOC_SERIES_STM32L0)|| defined(SOC_SERIES_STM32F3) || defined(SOC_SERIES_STM32L1)
+        /* enable DMA clock && Delay after an RCC peripheral clock enabling*/
+        SET_BIT(RCC->AHBENR, dma_config->dma_rcc);
+        tmpreg = READ_BIT(RCC->AHBENR, dma_config->dma_rcc);
+#elif defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7) || defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32WL) \
+    || defined(SOC_SERIES_STM32G4)|| defined(SOC_SERIES_STM32H7) || defined(SOC_SERIES_STM32WB)
+        /* enable DMA clock && Delay after an RCC peripheral clock enabling*/
+        SET_BIT(RCC->AHB1ENR, dma_config->dma_rcc);
+        tmpreg = READ_BIT(RCC->AHB1ENR, dma_config->dma_rcc);
+#elif defined(SOC_SERIES_STM32MP1)
+        /* enable DMA clock && Delay after an RCC peripheral clock enabling*/
+        SET_BIT(RCC->MP_AHB2ENSETR, dma_config->dma_rcc);
+        tmpreg = READ_BIT(RCC->MP_AHB2ENSETR, dma_config->dma_rcc);
+#endif
+
+#if (defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32WL) || defined(SOC_SERIES_STM32G4) || defined(SOC_SERIES_STM32WB)) && defined(DMAMUX1)
+        /* enable DMAMUX clock for L4+ and G4 */
+        __HAL_RCC_DMAMUX1_CLK_ENABLE();
+#elif defined(SOC_SERIES_STM32MP1)
+        __HAL_RCC_DMAMUX_CLK_ENABLE();
+#endif
+
+        UNUSED(tmpreg);   /* To avoid compiler warnings */
+    }
+
+    __HAL_LINKDMA(&(uart->handle), hdmarx, uart->dma_rx.handle);
+
+#if defined(SOC_SERIES_STM32F1) || defined(SOC_SERIES_STM32F0) || defined(SOC_SERIES_STM32L0)|| defined(SOC_SERIES_STM32F3) || defined(SOC_SERIES_STM32L1)
+    DMA_Handle->Instance                 = dma_config->Instance;
+#elif defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7)
+    DMA_Handle->Instance                 = dma_config->Instance;
+    DMA_Handle->Init.Channel             = dma_config->channel;
+#elif defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32WL) || defined(SOC_SERIES_STM32G0) || defined(SOC_SERIES_STM32G4) || defined(SOC_SERIES_STM32WB)\
+    || defined(SOC_SERIES_STM32H7) || defined(SOC_SERIES_STM32MP1)
+    DMA_Handle->Instance                 = dma_config->Instance;
+    DMA_Handle->Init.Request             = dma_config->request;
+#endif
+    DMA_Handle->Init.PeriphInc           = DMA_PINC_DISABLE;
+    DMA_Handle->Init.MemInc              = DMA_MINC_ENABLE;
+    DMA_Handle->Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
+    DMA_Handle->Init.MemDataAlignment    = DMA_MDATAALIGN_BYTE;
+
+    DMA_Handle->Init.Direction           = DMA_PERIPH_TO_MEMORY;
+    DMA_Handle->Init.Mode                = DMA_CIRCULAR;
+
+    DMA_Handle->Init.Priority            = DMA_PRIORITY_MEDIUM;
+#if defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7) || defined(SOC_SERIES_STM32H7) || defined(SOC_SERIES_STM32MP1)
+    DMA_Handle->Init.FIFOMode            = DMA_FIFOMODE_DISABLE;
+#endif
+    if (HAL_DMA_DeInit(DMA_Handle) != HAL_OK)
+    {
+        RT_ASSERT(0);
+    }
+
+    if (HAL_DMA_Init(DMA_Handle) != HAL_OK)
+    {
+        RT_ASSERT(0);
+    }
+
+    /* enable interrupt */
+    /* Start DMA transfer */
+    if (HAL_UART_Receive_DMA(&(uart->handle), serial->serial_dma_rx, RT_SERIAL_DMA_BUFSZ) != HAL_OK)
+    {
+        /* Transfer error in reception process */
+        RT_ASSERT(0);
+    }
+    CLEAR_BIT(uart->handle.Instance->CR3, USART_CR3_EIE);
+    __HAL_UART_ENABLE_IT(&(uart->handle), UART_IT_IDLE);
+
+    /* DMA irq should set in DMA TX mode, or HAL_UART_TxCpltCallback function will not be called */
+    HAL_NVIC_SetPriority(dma_config->dma_irq, 0, 0);
+    HAL_NVIC_EnableIRQ(dma_config->dma_irq);
+}
+
+static void stm32_dma_tx_config(struct rt_serial_device *serial)
+{
+    DMA_HandleTypeDef *DMA_Handle;
+    struct dma_config *dma_config;
+    struct stm32_uart *uart;
+
+    RT_ASSERT(serial != RT_NULL);
+    uart = rt_container_of(serial, struct stm32_uart, serial);
+
+    DMA_Handle = &uart->dma_tx.handle;
+    dma_config = uart->uart_config->dma_conf_tx;
+
+    LOG_D("%s dma config start", uart->uart_config->name);
+
+    {
+        rt_uint32_t tmpreg = 0x00U;
+#if defined(SOC_SERIES_STM32F1) || defined(SOC_SERIES_STM32F0) || defined(SOC_SERIES_STM32G0) \
+    || defined(SOC_SERIES_STM32L0)|| defined(SOC_SERIES_STM32F3) || defined(SOC_SERIES_STM32L1)
+        /* enable DMA clock && Delay after an RCC peripheral clock enabling*/
+        SET_BIT(RCC->AHBENR, dma_config->dma_rcc);
+        tmpreg = READ_BIT(RCC->AHBENR, dma_config->dma_rcc);
+#elif defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7) || defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32WL) \
+    || defined(SOC_SERIES_STM32G4)|| defined(SOC_SERIES_STM32H7) || defined(SOC_SERIES_STM32WB)
+        /* enable DMA clock && Delay after an RCC peripheral clock enabling*/
+        SET_BIT(RCC->AHB1ENR, dma_config->dma_rcc);
+        tmpreg = READ_BIT(RCC->AHB1ENR, dma_config->dma_rcc);
+#elif defined(SOC_SERIES_STM32MP1)
+        /* enable DMA clock && Delay after an RCC peripheral clock enabling*/
+        SET_BIT(RCC->MP_AHB2ENSETR, dma_config->dma_rcc);
+        tmpreg = READ_BIT(RCC->MP_AHB2ENSETR, dma_config->dma_rcc);
+#endif
+
+#if (defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32WL) || defined(SOC_SERIES_STM32G4) || defined(SOC_SERIES_STM32WB)) && defined(DMAMUX1)
+        /* enable DMAMUX clock for L4+ and G4 */
+        __HAL_RCC_DMAMUX1_CLK_ENABLE();
+#elif defined(SOC_SERIES_STM32MP1)
+        __HAL_RCC_DMAMUX_CLK_ENABLE();
+#endif
+
+        UNUSED(tmpreg);   /* To avoid compiler warnings */
+    }
+
+    __HAL_LINKDMA(&(uart->handle), hdmatx, uart->dma_tx.handle);
+
+
+#if defined(SOC_SERIES_STM32F1) || defined(SOC_SERIES_STM32F0) || defined(SOC_SERIES_STM32L0)|| defined(SOC_SERIES_STM32F3) || defined(SOC_SERIES_STM32L1)
+    DMA_Handle->Instance                 = dma_config->Instance;
+#elif defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7)
+    DMA_Handle->Instance                 = dma_config->Instance;
+    DMA_Handle->Init.Channel             = dma_config->channel;
+#elif defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32WL) || defined(SOC_SERIES_STM32G0) || defined(SOC_SERIES_STM32G4) || defined(SOC_SERIES_STM32WB)\
+    || defined(SOC_SERIES_STM32H7) || defined(SOC_SERIES_STM32MP1)
+    DMA_Handle->Instance                 = dma_config->Instance;
+    DMA_Handle->Init.Request             = dma_config->request;
+#endif
+    DMA_Handle->Init.PeriphInc           = DMA_PINC_DISABLE;
+    DMA_Handle->Init.MemInc              = DMA_MINC_ENABLE;
+    DMA_Handle->Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
+    DMA_Handle->Init.MemDataAlignment    = DMA_MDATAALIGN_BYTE;
+
+    DMA_Handle->Init.Direction           = DMA_MEMORY_TO_PERIPH;
+    DMA_Handle->Init.Mode                = DMA_NORMAL;
+
+    DMA_Handle->Init.Priority            = DMA_PRIORITY_MEDIUM;
+#if defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7) || defined(SOC_SERIES_STM32H7) || defined(SOC_SERIES_STM32MP1)
+    DMA_Handle->Init.FIFOMode            = DMA_FIFOMODE_DISABLE;
+#endif
+    if (HAL_DMA_DeInit(DMA_Handle) != HAL_OK)
+    {
+        RT_ASSERT(0);
+    }
+
+    if (HAL_DMA_Init(DMA_Handle) != HAL_OK)
+    {
+        RT_ASSERT(0);
+    }
+
+    /* DMA irq should set in DMA TX mode, or HAL_UART_TxCpltCallback function will not be called */
+    HAL_NVIC_SetPriority(dma_config->dma_irq, 0, 0);
+    HAL_NVIC_EnableIRQ(dma_config->dma_irq);
+}
+
+/**
+  * @brief  UART error callbacks
+  * @param  huart: UART handle
+  * @note   This example shows a simple way to report transfer error, and you can
+  *         add your own implementation.
+  * @retval None
+  */
+void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart)
+{
+    struct stm32_uart *uart;
+
+    RT_ASSERT(huart != NULL);
+
+    uart = (struct stm32_uart *)huart;
+    LOG_D("%s: %s %d\n", __FUNCTION__, uart->uart_config->name, huart->ErrorCode);
+    UNUSED(uart);
+}
+
+/**
+  * @brief  Rx Transfer completed callback
+  * @param  huart: UART handle
+  * @note   This example shows a simple way to report end of DMA Rx transfer, and
+  *         you can add your own implementation.
+  * @retval None
+  */
+void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart)
+{
+    struct stm32_uart *uart;
+
+    RT_ASSERT(huart != NULL);
+
+    uart = (struct stm32_uart *)huart;
+    dma_isr(&uart->serial);
+}
+
+/**
+  * @brief  Rx Half transfer completed callback
+  * @param  huart: UART handle
+  * @note   This example shows a simple way to report end of DMA Rx Half transfer,
+  *         and you can add your own implementation.
+  * @retval None
+  */
+void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart)
+{
+    struct stm32_uart *uart;
+
+    RT_ASSERT(huart != NULL);
+
+    uart = (struct stm32_uart *)huart;
+    dma_isr(&uart->serial);
+}
+
+/**
+  * @brief  HAL_UART_TxCpltCallback
+  * @param  huart: UART handle
+  * @note   This callback can be called by two functions, first in UART_EndTransmit_IT when
+  *         UART Tx complete and second in UART_DMATransmitCplt function in DMA Circular mode.
+  * @retval None
+  */
+void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart)
+{
+    struct stm32_uart *uart;
+    rt_size_t dma_cnt;
+
+    RT_ASSERT(huart != NULL);
+
+    uart = (struct stm32_uart *)huart;
+
+    dma_cnt = __HAL_DMA_GET_COUNTER(&(uart->dma_tx.handle));
+
+    if (dma_cnt == 0)
+    {
+        rt_hw_serial_isr(&uart->serial, RT_SERIAL_EVENT_TX_DMADONE);
+    }
+}
+#endif  /* RT_SERIAL_USING_DMA */
+
+static const struct rt_uart_ops stm32_uart_ops =
+{
+    .init = stm32_init,
+    .configure = stm32_configure,
+    .control = stm32_control,
+    .putc = stm32_putc,
+    .getc = stm32_getc,
+    .flush = stm32_flush,
+    .start_tx = stm32_start_tx,
+    .stop_tx = stm32_stop_tx,
+#ifdef RT_SERIAL_USING_DMA
+    .is_dma_txing = stm32_is_dma_txing,
+    .start_dma_tx = stm32_start_dma_tx,
+    .stop_dma_tx = stm32_stop_dma_tx,
+#endif
+    .enable_interrupt = stm32_enable_interrupt,
+    .disable_interrupt = stm32_disable_interrupt,
+};
+
+int rt_hw_usart_init(void)
+{
+    rt_size_t obj_num = sizeof(uart_obj) / sizeof(struct stm32_uart);
+    rt_err_t result = 0;
+
+#ifdef RT_SERIAL_USING_DMA
+    stm32_uart_get_dma_config();
+#endif
+
+    for (int i = 0; i < obj_num; i++)
+    {
+        /* init UART object */
+        uart_obj[i].uart_config = &uart_config[i];
+        uart_obj[i].serial.ops = &stm32_uart_ops;
+
+        /* register UART device */
+        result = rt_hw_serial_register(&uart_obj[i].serial, uart_obj[i].uart_config->name,
+                                       RT_DEVICE_FLAG_RDWR
+                                       | RT_DEVICE_FLAG_INT_RX
+                                       | RT_DEVICE_FLAG_INT_TX
+#ifdef RT_SERIAL_USING_DMA
+                                       | uart_obj[i].uart_dma_flag
+#endif
+                                       , NULL);
+        RT_ASSERT(result == RT_EOK);
+    }
+
+    return result;
+}
+
+#endif /* RT_USING_SERIAL */

bsp/stm32/libraries/HAL_Drivers/drv_usartX.h

@@ -0,0 +1,73 @@
+/*
+ * Copyright (c) 2006-2022, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2022-04-10     THEWON       first version for serialX
+ */
+
+#ifndef __DRV_USARTX_H__
+#define __DRV_USARTX_H__
+
+#include <rtthread.h>
+#include "rtdevice.h"
+#include <rthw.h>
+#include <drv_common.h>
+#include "drv_dma.h"
+
+int rt_hw_usart_init(void);
+
+#if defined(SOC_SERIES_STM32F0) || defined(SOC_SERIES_STM32F1) || defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32WL) \
+    || defined(SOC_SERIES_STM32L0) || defined(SOC_SERIES_STM32G0) || defined(SOC_SERIES_STM32G4) || defined(SOC_SERIES_STM32WB)|| defined(SOC_SERIES_STM32F3)
+#define DMA_INSTANCE_TYPE              DMA_Channel_TypeDef
+#elif defined(SOC_SERIES_STM32F2) || defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32F7) \
+    || defined(SOC_SERIES_STM32H7) || defined(SOC_SERIES_STM32MP1)
+#define DMA_INSTANCE_TYPE              DMA_Stream_TypeDef
+#endif /*  defined(SOC_SERIES_STM32F1) || defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32WL) */
+
+#if defined(SOC_SERIES_STM32F1) || defined(SOC_SERIES_STM32L4) || defined(SOC_SERIES_STM32WL) || defined(SOC_SERIES_STM32F2) \
+    || defined(SOC_SERIES_STM32F4) || defined(SOC_SERIES_STM32L0) || defined(SOC_SERIES_STM32G0) \
+    || defined(SOC_SERIES_STM32G4) || defined(SOC_SERIES_STM32WB)|| defined(SOC_SERIES_STM32F3)
+#define UART_INSTANCE_CLEAR_FUNCTION    __HAL_UART_CLEAR_FLAG
+#elif defined(SOC_SERIES_STM32F7) || defined(SOC_SERIES_STM32F0) || defined(SOC_SERIES_STM32H7) \
+    || defined(SOC_SERIES_STM32MP1)
+#define UART_INSTANCE_CLEAR_FUNCTION    __HAL_UART_CLEAR_IT
+#endif
+
+/* stm32 config class */
+struct stm32_uart_config
+{
+    const char *name;
+    USART_TypeDef *Instance;
+    IRQn_Type irq_type;
+    rt_uint32_t mask;
+#ifdef RT_SERIAL_USING_DMA
+    struct dma_config *dma_conf_rx;
+    struct dma_config *dma_conf_tx;
+#endif
+};
+
+/* stm32 uart driver class */
+struct stm32_uart
+{
+    UART_HandleTypeDef handle;
+    struct rt_serial_device serial;
+    struct stm32_uart_config *uart_config;
+
+#ifdef RT_SERIAL_USING_DMA
+    rt_bool_t dmaTxing;
+    struct
+    {
+        DMA_HandleTypeDef handle;
+    } dma_rx;
+    struct
+    {
+        DMA_HandleTypeDef handle;
+    } dma_tx;
+    rt_uint16_t uart_dma_flag;
+#endif
+};
+
+#endif  /* __DRV_USART_H__ */

bsp/stm32/stm32f407-st-discovery/.config

@@ -1,7 +1,4 @@
-#
-# Automatically generated file; DO NOT EDIT.
-# RT-Thread Configuration
-#
+# Generated by Kconfiglib (https://github.com/ulfalizer/Kconfiglib)
 
 #
 # RT-Thread Kernel
@@ -21,17 +18,22 @@ CONFIG_RT_HOOK_USING_FUNC_PTR=y
 CONFIG_RT_USING_IDLE_HOOK=y
 CONFIG_RT_IDLE_HOOK_LIST_SIZE=4
 CONFIG_IDLE_THREAD_STACK_SIZE=256
-# CONFIG_RT_USING_TIMER_SOFT is not set
+CONFIG_RT_USING_TIMER_SOFT=y
+CONFIG_RT_TIMER_THREAD_PRIO=4
+CONFIG_RT_TIMER_THREAD_STACK_SIZE=512
 
 #
 # kservice optimization
 #
-# CONFIG_RT_KSERVICE_USING_STDLIB is not set
+CONFIG_RT_KSERVICE_USING_STDLIB=y
+# CONFIG_RT_KSERVICE_USING_STDLIB_MEMORY is not set
 # CONFIG_RT_KSERVICE_USING_TINY_SIZE is not set
 # CONFIG_RT_USING_TINY_FFS is not set
 # CONFIG_RT_KPRINTF_USING_LONGLONG is not set
+# end of kservice optimization
+
 CONFIG_RT_DEBUG=y
-CONFIG_RT_DEBUG_COLOR=y
+# CONFIG_RT_DEBUG_COLOR is not set
 # CONFIG_RT_DEBUG_INIT_CONFIG is not set
 # CONFIG_RT_DEBUG_THREAD_CONFIG is not set
 # CONFIG_RT_DEBUG_SCHEDULER_CONFIG is not set
@@ -52,6 +54,7 @@ CONFIG_RT_USING_EVENT=y
 CONFIG_RT_USING_MAILBOX=y
 CONFIG_RT_USING_MESSAGEQUEUE=y
 # CONFIG_RT_USING_SIGNALS is not set
+# end of Inter-Thread communication
 
 #
 # Memory Management
@@ -68,6 +71,7 @@ CONFIG_RT_USING_SMALL_MEM_AS_HEAP=y
 # CONFIG_RT_USING_MEMTRACE is not set
 # CONFIG_RT_USING_HEAP_ISR is not set
 CONFIG_RT_USING_HEAP=y
+# end of Memory Management
 
 #
 # Kernel Device Object
@@ -77,13 +81,16 @@ CONFIG_RT_USING_DEVICE=y
 # CONFIG_RT_USING_INTERRUPT_INFO is not set
 CONFIG_RT_USING_CONSOLE=y
 CONFIG_RT_CONSOLEBUF_SIZE=128
-CONFIG_RT_CONSOLE_DEVICE_NAME="uart1"
+CONFIG_RT_CONSOLE_DEVICE_NAME="uart6"
+# end of Kernel Device Object
+
 CONFIG_RT_VER_NUM=0x40101
+# end of RT-Thread Kernel
+
 CONFIG_ARCH_ARM=y
 CONFIG_RT_USING_CPU_FFS=y
 CONFIG_ARCH_ARM_CORTEX_M=y
 CONFIG_ARCH_ARM_CORTEX_M4=y
-# CONFIG_ARCH_CPU_STACK_GROWS_UPWARD is not set
 
 #
 # RT-Thread Components
@@ -108,7 +115,17 @@ CONFIG_FINSH_USING_DESCRIPTION=y
 # CONFIG_FINSH_ECHO_DISABLE_DEFAULT is not set
 # CONFIG_FINSH_USING_AUTH is not set
 CONFIG_FINSH_ARG_MAX=10
-# CONFIG_RT_USING_DFS is not set
+CONFIG_RT_USING_DFS=y
+CONFIG_DFS_USING_POSIX=y
+CONFIG_DFS_USING_WORKDIR=y
+CONFIG_DFS_FILESYSTEMS_MAX=4
+CONFIG_DFS_FILESYSTEM_TYPES_MAX=4
+CONFIG_DFS_FD_MAX=16
+# CONFIG_RT_USING_DFS_MNTTABLE is not set
+# CONFIG_RT_USING_DFS_ELMFAT is not set
+# CONFIG_RT_USING_DFS_DEVFS is not set
+# CONFIG_RT_USING_DFS_ROMFS is not set
+# CONFIG_RT_USING_DFS_RAMFS is not set
 # CONFIG_RT_USING_FAL is not set
 # CONFIG_RT_USING_LWP is not set
 
@@ -120,6 +137,7 @@ CONFIG_RT_USING_DEVICE_IPC=y
 CONFIG_RT_USING_SERIAL=y
 CONFIG_RT_USING_SERIAL_V1=y
 # CONFIG_RT_USING_SERIAL_V2 is not set
+# CONFIG_RT_USING_SERIAL_X is not set
 CONFIG_RT_SERIAL_USING_DMA=y
 CONFIG_RT_SERIAL_RB_BUFSZ=64
 # CONFIG_RT_USING_CAN is not set
@@ -137,7 +155,7 @@ CONFIG_RT_USING_PIN=y
 # CONFIG_RT_USING_RTC is not set
 # CONFIG_RT_USING_SDIO is not set
 # CONFIG_RT_USING_SPI is not set
-# CONFIG_RT_USING_WDT is not set
+CONFIG_RT_USING_WDT=y
 # CONFIG_RT_USING_AUDIO is not set
 # CONFIG_RT_USING_SENSOR is not set
 # CONFIG_RT_USING_TOUCH is not set
@@ -149,9 +167,10 @@ CONFIG_RT_USING_PIN=y
 #
 # Using USB
 #
-# CONFIG_RT_USING_USB is not set
 # CONFIG_RT_USING_USB_HOST is not set
 # CONFIG_RT_USING_USB_DEVICE is not set
+# end of Using USB
+# end of Device Drivers
 
 #
 # C/C++ and POSIX layer
@@ -178,7 +197,11 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 #
 # Socket is in the 'Network' category
 #
+# end of Interprocess Communication (IPC)
+# end of POSIX (Portable Operating System Interface) layer
+
 # CONFIG_RT_USING_CPLUSPLUS is not set
+# end of C/C++ and POSIX layer
 
 #
 # Network
@@ -187,6 +210,7 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_RT_USING_NETDEV is not set
 # CONFIG_RT_USING_LWIP is not set
 # CONFIG_RT_USING_AT is not set
+# end of Network
 
 #
 # Utilities
@@ -196,12 +220,16 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_RT_USING_UTEST is not set
 # CONFIG_RT_USING_VAR_EXPORT is not set
 # CONFIG_RT_USING_RT_LINK is not set
+# end of Utilities
+
 # CONFIG_RT_USING_VBUS is not set
+# end of RT-Thread Components
 
 #
 # RT-Thread Utestcases
 #
 # CONFIG_RT_USING_UTESTCASES is not set
+# end of RT-Thread Utestcases
 
 #
 # RT-Thread online packages
@@ -210,7 +238,6 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 #
 # IoT - internet of things
 #
-# CONFIG_PKG_USING_LWIP is not set
 # CONFIG_PKG_USING_LORAWAN_DRIVER is not set
 # CONFIG_PKG_USING_PAHOMQTT is not set
 # CONFIG_PKG_USING_UMQTT is not set
@@ -233,12 +260,17 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # Marvell WiFi
 #
 # CONFIG_PKG_USING_WLANMARVELL is not set
+# end of Marvell WiFi
 
 #
 # Wiced WiFi
 #
 # CONFIG_PKG_USING_WLAN_WICED is not set
+# end of Wiced WiFi
+
 # CONFIG_PKG_USING_RW007 is not set
+# end of Wi-Fi
+
 # CONFIG_PKG_USING_COAP is not set
 # CONFIG_PKG_USING_NOPOLL is not set
 # CONFIG_PKG_USING_NETUTILS is not set
@@ -262,6 +294,8 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_JOYLINK is not set
 # CONFIG_PKG_USING_EZ_IOT_OS is not set
 # CONFIG_PKG_USING_IOTSHARP_SDK is not set
+# end of IoT Cloud
+
 # CONFIG_PKG_USING_NIMBLE is not set
 # CONFIG_PKG_USING_LLSYNC_SDK_ADAPTER is not set
 # CONFIG_PKG_USING_OTA_DOWNLOADER is not set
@@ -289,6 +323,8 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_AGILE_FTP is not set
 # CONFIG_PKG_USING_EMBEDDEDPROTO is not set
 # CONFIG_PKG_USING_RT_LINK_HW is not set
+# CONFIG_PKG_USING_RYANMQTT is not set
+# CONFIG_PKG_USING_RYANW5500 is not set
 # CONFIG_PKG_USING_LORA_PKT_FWD is not set
 # CONFIG_PKG_USING_LORA_GW_DRIVER_LIB is not set
 # CONFIG_PKG_USING_LORA_PKT_SNIFFER is not set
@@ -296,6 +332,9 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_SMALL_MODBUS is not set
 # CONFIG_PKG_USING_NET_SERVER is not set
 # CONFIG_PKG_USING_ZFTP is not set
+# CONFIG_PKG_USING_WOL is not set
+# CONFIG_PKG_USING_ZEPHYR_POLLING is not set
+# end of IoT - internet of things
 
 #
 # security packages
@@ -306,6 +345,7 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_TINYCRYPT is not set
 # CONFIG_PKG_USING_TFM is not set
 # CONFIG_PKG_USING_YD_CRYPTO is not set
+# end of security packages
 
 #
 # language packages
@@ -321,18 +361,22 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_JSMN is not set
 # CONFIG_PKG_USING_AGILE_JSMN is not set
 # CONFIG_PKG_USING_PARSON is not set
+# end of JSON: JavaScript Object Notation, a lightweight data-interchange format
 
 #
 # XML: Extensible Markup Language
 #
 # CONFIG_PKG_USING_SIMPLE_XML is not set
 # CONFIG_PKG_USING_EZXML is not set
+# end of XML: Extensible Markup Language
+
 # CONFIG_PKG_USING_LUATOS_SOC is not set
 # CONFIG_PKG_USING_LUA is not set
 # CONFIG_PKG_USING_JERRYSCRIPT is not set
 # CONFIG_PKG_USING_MICROPYTHON is not set
 # CONFIG_PKG_USING_PIKASCRIPT is not set
 # CONFIG_PKG_USING_RTT_RUST is not set
+# end of language packages
 
 #
 # multimedia packages
@@ -345,12 +389,15 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_LITTLEVGL2RTT is not set
 # CONFIG_PKG_USING_LV_MUSIC_DEMO is not set
 # CONFIG_PKG_USING_GUI_GUIDER_DEMO is not set
+# end of LVGL: powerful and easy-to-use embedded GUI library
 
 #
 # u8g2: a monochrome graphic library
 #
 # CONFIG_PKG_USING_U8G2_OFFICIAL is not set
 # CONFIG_PKG_USING_U8G2 is not set
+# end of u8g2: a monochrome graphic library
+
 # CONFIG_PKG_USING_OPENMV is not set
 # CONFIG_PKG_USING_MUPDF is not set
 # CONFIG_PKG_USING_STEMWIN is not set
@@ -364,18 +411,14 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_MP3PLAYER is not set
 # CONFIG_PKG_USING_TINYJPEG is not set
 # CONFIG_PKG_USING_UGUI is not set
-
-#
-# PainterEngine: A cross-platform graphics application framework written in C language
-#
-# CONFIG_PKG_USING_PAINTERENGINE is not set
-# CONFIG_PKG_USING_PAINTERENGINE_AUX is not set
 # CONFIG_PKG_USING_MCURSES is not set
 # CONFIG_PKG_USING_TERMBOX is not set
 # CONFIG_PKG_USING_VT100 is not set
 # CONFIG_PKG_USING_QRCODE is not set
 # CONFIG_PKG_USING_GUIENGINE is not set
 # CONFIG_PKG_USING_PERSIMMON is not set
+# CONFIG_PKG_USING_3GPP_AMRNB is not set
+# end of multimedia packages
 
 #
 # tools packages
@@ -385,9 +428,9 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_EASYLOGGER is not set
 # CONFIG_PKG_USING_SYSTEMVIEW is not set
 # CONFIG_PKG_USING_SEGGER_RTT is not set
+# CONFIG_PKG_USING_RTT_AUTO_EXE_CMD is not set
 # CONFIG_PKG_USING_RDB is not set
 # CONFIG_PKG_USING_ULOG_EASYFLASH is not set
-# CONFIG_PKG_USING_ULOG_FILE is not set
 # CONFIG_PKG_USING_LOGMGR is not set
 # CONFIG_PKG_USING_ADBD is not set
 # CONFIG_PKG_USING_COREMARK is not set
@@ -421,8 +464,10 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_CBOX is not set
 # CONFIG_PKG_USING_SNOWFLAKE is not set
 # CONFIG_PKG_USING_HASH_MATCH is not set
-# CONFIG_PKG_USING_FIRE_PID_CURVE is not set
 # CONFIG_PKG_USING_ARMV7M_DWT_TOOL is not set
+# CONFIG_PKG_USING_VOFA_PLUS is not set
+# CONFIG_PKG_USING_RT_TRACE is not set
+# end of tools packages
 
 #
 # system packages
@@ -434,6 +479,7 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_RT_MEMCPY_CM is not set
 # CONFIG_PKG_USING_RT_KPRINTF_THREADSAFE is not set
 # CONFIG_PKG_USING_RT_VSNPRINTF_FULL is not set
+# end of enhanced kernel services
 
 #
 # acceleration: Assembly language or algorithmic acceleration packages
@@ -441,6 +487,7 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_QFPLIB_M0_FULL is not set
 # CONFIG_PKG_USING_QFPLIB_M0_TINY is not set
 # CONFIG_PKG_USING_QFPLIB_M3 is not set
+# end of acceleration: Assembly language or algorithmic acceleration packages
 
 #
 # CMSIS: ARM Cortex-M Microcontroller Software Interface Standard
@@ -448,6 +495,7 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_CMSIS_5 is not set
 # CONFIG_PKG_USING_CMSIS_RTOS1 is not set
 # CONFIG_PKG_USING_CMSIS_RTOS2 is not set
+# end of CMSIS: ARM Cortex-M Microcontroller Software Interface Standard
 
 #
 # Micrium: Micrium software products porting for RT-Thread
@@ -458,7 +506,8 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_UC_CLK is not set
 # CONFIG_PKG_USING_UC_COMMON is not set
 # CONFIG_PKG_USING_UC_MODBUS is not set
-# CONFIG_PKG_USING_RTDUINO is not set
+# end of Micrium: Micrium software products porting for RT-Thread
+
 # CONFIG_PKG_USING_FREERTOS_WRAPPER is not set
 # CONFIG_PKG_USING_CAIRO is not set
 # CONFIG_PKG_USING_PIXMAN is not set
@@ -493,19 +542,99 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_KMULTI_RTIMER is not set
 # CONFIG_PKG_USING_TFDB is not set
 # CONFIG_PKG_USING_QPC is not set
+# CONFIG_PKG_USING_AGILE_UPGRADE is not set
+# CONFIG_PKG_USING_FLASH_BLOB is not set
+# end of system packages
 
 #
 # peripheral libraries and drivers
 #
-# CONFIG_PKG_USING_SENSORS_DRIVERS is not set
-# CONFIG_PKG_USING_REALTEK_AMEBA is not set
+
+#
+# sensors drivers
+#
+# CONFIG_PKG_USING_LSM6DSM is not set
+# CONFIG_PKG_USING_LSM6DSL is not set
+# CONFIG_PKG_USING_LPS22HB is not set
+# CONFIG_PKG_USING_HTS221 is not set
+# CONFIG_PKG_USING_LSM303AGR is not set
+# CONFIG_PKG_USING_BME280 is not set
+# CONFIG_PKG_USING_BME680 is not set
+# CONFIG_PKG_USING_BMA400 is not set
+# CONFIG_PKG_USING_BMI160_BMX160 is not set
+# CONFIG_PKG_USING_SPL0601 is not set
+# CONFIG_PKG_USING_MS5805 is not set
+# CONFIG_PKG_USING_DA270 is not set
+# CONFIG_PKG_USING_DF220 is not set
+# CONFIG_PKG_USING_HSHCAL001 is not set
+# CONFIG_PKG_USING_BH1750 is not set
+# CONFIG_PKG_USING_MPU6XXX is not set
+# CONFIG_PKG_USING_AHT10 is not set
+# CONFIG_PKG_USING_AP3216C is not set
+# CONFIG_PKG_USING_TSL4531 is not set
+# CONFIG_PKG_USING_DS18B20 is not set
+# CONFIG_PKG_USING_DHT11 is not set
+# CONFIG_PKG_USING_DHTXX is not set
+# CONFIG_PKG_USING_GY271 is not set
+# CONFIG_PKG_USING_GP2Y10 is not set
+# CONFIG_PKG_USING_SGP30 is not set
+# CONFIG_PKG_USING_HDC1000 is not set
+# CONFIG_PKG_USING_BMP180 is not set
+# CONFIG_PKG_USING_BMP280 is not set
+# CONFIG_PKG_USING_SHTC1 is not set
+# CONFIG_PKG_USING_BMI088 is not set
+# CONFIG_PKG_USING_HMC5883 is not set
+# CONFIG_PKG_USING_MAX6675 is not set
+# CONFIG_PKG_USING_TMP1075 is not set
+# CONFIG_PKG_USING_SR04 is not set
+# CONFIG_PKG_USING_CCS811 is not set
+# CONFIG_PKG_USING_PMSXX is not set
+# CONFIG_PKG_USING_RT3020 is not set
+# CONFIG_PKG_USING_MLX90632 is not set
+# CONFIG_PKG_USING_MLX90393 is not set
+# CONFIG_PKG_USING_MLX90392 is not set
+# CONFIG_PKG_USING_MLX90397 is not set
+# CONFIG_PKG_USING_MS5611 is not set
+# CONFIG_PKG_USING_MAX31865 is not set
+# CONFIG_PKG_USING_VL53L0X is not set
+# CONFIG_PKG_USING_INA260 is not set
+# CONFIG_PKG_USING_MAX30102 is not set
+# CONFIG_PKG_USING_INA226 is not set
+# CONFIG_PKG_USING_LIS2DH12 is not set
+# CONFIG_PKG_USING_HS300X is not set
+# CONFIG_PKG_USING_ZMOD4410 is not set
+# CONFIG_PKG_USING_ISL29035 is not set
+# CONFIG_PKG_USING_MMC3680KJ is not set
+# CONFIG_PKG_USING_QMP6989 is not set
+# CONFIG_PKG_USING_BALANCE is not set
 # CONFIG_PKG_USING_SHT2X is not set
 # CONFIG_PKG_USING_SHT3X is not set
+# CONFIG_PKG_USING_AD7746 is not set
 # CONFIG_PKG_USING_ADT74XX is not set
+# CONFIG_PKG_USING_MAX17048 is not set
 # CONFIG_PKG_USING_AS7341 is not set
+# CONFIG_PKG_USING_CW2015 is not set
+# CONFIG_PKG_USING_ICM20608 is not set
+# CONFIG_PKG_USING_PAJ7620 is not set
+# CONFIG_PKG_USING_STHS34PF80 is not set
+# end of sensors drivers
+
+#
+# touch drivers
+#
+# CONFIG_PKG_USING_GT9147 is not set
+# CONFIG_PKG_USING_GT1151 is not set
+# CONFIG_PKG_USING_GT917S is not set
+# CONFIG_PKG_USING_GT911 is not set
+# CONFIG_PKG_USING_FT6206 is not set
+# CONFIG_PKG_USING_FT5426 is not set
+# CONFIG_PKG_USING_FT6236 is not set
+# CONFIG_PKG_USING_XPT2046_TOUCH is not set
+# end of touch drivers
+
+# CONFIG_PKG_USING_REALTEK_AMEBA is not set
 # CONFIG_PKG_USING_STM32_SDIO is not set
 # CONFIG_PKG_USING_ESP_IDF is not set
-# CONFIG_PKG_USING_ICM20608 is not set
 # CONFIG_PKG_USING_BUTTON is not set
 # CONFIG_PKG_USING_PCF8574 is not set
 # CONFIG_PKG_USING_SX12XX is not set
@@ -515,25 +644,23 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_LKDGUI is not set
 # CONFIG_PKG_USING_NRF5X_SDK is not set
 # CONFIG_PKG_USING_NRFX is not set
-# CONFIG_PKG_USING_WM_LIBRARIES is not set
 
 #
 # Kendryte SDK
 #
 # CONFIG_PKG_USING_K210_SDK is not set
 # CONFIG_PKG_USING_KENDRYTE_SDK is not set
+# end of Kendryte SDK
+
 # CONFIG_PKG_USING_INFRARED is not set
 # CONFIG_PKG_USING_MULTI_INFRARED is not set
 # CONFIG_PKG_USING_AGILE_BUTTON is not set
 # CONFIG_PKG_USING_AGILE_LED is not set
 # CONFIG_PKG_USING_AT24CXX is not set
 # CONFIG_PKG_USING_MOTIONDRIVER2RTT is not set
-# CONFIG_PKG_USING_AD7746 is not set
 # CONFIG_PKG_USING_PCA9685 is not set
 # CONFIG_PKG_USING_I2C_TOOLS is not set
 # CONFIG_PKG_USING_NRF24L01 is not set
-# CONFIG_PKG_USING_TOUCH_DRIVERS is not set
-# CONFIG_PKG_USING_MAX17048 is not set
 # CONFIG_PKG_USING_RPLIDAR is not set
 # CONFIG_PKG_USING_AS608 is not set
 # CONFIG_PKG_USING_RC522 is not set
@@ -548,7 +675,6 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_CAN_YMODEM is not set
 # CONFIG_PKG_USING_LORA_RADIO_DRIVER is not set
 # CONFIG_PKG_USING_QLED is not set
-# CONFIG_PKG_USING_PAJ7620 is not set
 # CONFIG_PKG_USING_AGILE_CONSOLE is not set
 # CONFIG_PKG_USING_LD3320 is not set
 # CONFIG_PKG_USING_WK2124 is not set
@@ -576,13 +702,14 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_MISAKA_AT24CXX is not set
 # CONFIG_PKG_USING_MISAKA_RGB_BLING is not set
 # CONFIG_PKG_USING_LORA_MODEM_DRIVER is not set
-# CONFIG_PKG_USING_BL_MCU_SDK is not set
 # CONFIG_PKG_USING_SOFT_SERIAL is not set
 # CONFIG_PKG_USING_MB85RS16 is not set
-# CONFIG_PKG_USING_CW2015 is not set
 # CONFIG_PKG_USING_RFM300 is not set
 # CONFIG_PKG_USING_IO_INPUT_FILTER is not set
 # CONFIG_PKG_USING_RASPBERRYPI_PICO_SDK is not set
+# CONFIG_PKG_USING_LRF_NV7LIDAR is not set
+# CONFIG_PKG_USING_FINGERPRINT is not set
+# end of peripheral libraries and drivers
 
 #
 # AI packages
@@ -596,6 +723,14 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_ULAPACK is not set
 # CONFIG_PKG_USING_QUEST is not set
 # CONFIG_PKG_USING_NAXOS is not set
+# end of AI packages
+
+#
+# Signal Processing and Control Algorithm Packages
+#
+# CONFIG_PKG_USING_FIRE_PID_CURVE is not set
+# CONFIG_PKG_USING_UKAL is not set
+# end of Signal Processing and Control Algorithm Packages
 
 #
 # miscellaneous packages
@@ -604,6 +739,7 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 #
 # project laboratory
 #
+# end of project laboratory
 
 #
 # samples: kernel and components samples
@@ -612,6 +748,7 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_FILESYSTEM_SAMPLES is not set
 # CONFIG_PKG_USING_NETWORK_SAMPLES is not set
 # CONFIG_PKG_USING_PERIPHERAL_SAMPLES is not set
+# end of samples: kernel and components samples
 
 #
 # entertainment: terminal games and other interesting software packages
@@ -626,6 +763,9 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_TETRIS is not set
 # CONFIG_PKG_USING_DONUT is not set
 # CONFIG_PKG_USING_COWSAY is not set
+# CONFIG_PKG_USING_MORSE is not set
+# end of entertainment: terminal games and other interesting software packages
+
 # CONFIG_PKG_USING_LIBCSV is not set
 # CONFIG_PKG_USING_OPTPARSE is not set
 # CONFIG_PKG_USING_FASTLZ is not set
@@ -648,7 +788,6 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_VI is not set
 # CONFIG_PKG_USING_KI is not set
 # CONFIG_PKG_USING_ARMv7M_DWT is not set
-# CONFIG_PKG_USING_UKAL is not set
 # CONFIG_PKG_USING_CRCLIB is not set
 # CONFIG_PKG_USING_LWGPS is not set
 # CONFIG_PKG_USING_STATE_MACHINE is not set
@@ -659,63 +798,234 @@ CONFIG_RT_LIBC_DEFAULT_TIMEZONE=8
 # CONFIG_PKG_USING_SLCAN2RTT is not set
 # CONFIG_PKG_USING_SOEM is not set
 # CONFIG_PKG_USING_QPARAM is not set
+# CONFIG_PKG_USING_CorevMCU_CLI is not set
+# CONFIG_PKG_USING_GET_IRQ_PRIORITY is not set
+# end of miscellaneous packages
 
 #
-# Privated Packages of RealThread
+# Arduino libraries
 #
-# CONFIG_PKG_USING_CODEC is not set
-# CONFIG_PKG_USING_PLAYER is not set
-# CONFIG_PKG_USING_MPLAYER is not set
-# CONFIG_PKG_USING_PERSIMMON_SRC is not set
-# CONFIG_PKG_USING_JS_PERSIMMON is not set
-# CONFIG_PKG_USING_JERRYSCRIPT_WIN32 is not set
+# CONFIG_PKG_USING_RTDUINO is not set
 
 #
-# Network Utilities
+# Projects
 #
-# CONFIG_PKG_USING_WICED is not set
-# CONFIG_PKG_USING_CLOUDSDK is not set
-# CONFIG_PKG_USING_POWER_MANAGER is not set
-# CONFIG_PKG_USING_RT_OTA is not set
-# CONFIG_PKG_USING_RTINSIGHT is not set
-# CONFIG_PKG_USING_SMARTCONFIG is not set
-# CONFIG_PKG_USING_RTX is not set
-# CONFIG_RT_USING_TESTCASE is not set
-# CONFIG_PKG_USING_NGHTTP2 is not set
-# CONFIG_PKG_USING_AVS is not set
-# CONFIG_PKG_USING_ALI_LINKKIT is not set
-# CONFIG_PKG_USING_STS is not set
-# CONFIG_PKG_USING_DLMS is not set
-# CONFIG_PKG_USING_AUDIO_FRAMEWORK is not set
-# CONFIG_PKG_USING_ZBAR is not set
-# CONFIG_PKG_USING_MCF is not set
-# CONFIG_PKG_USING_URPC is not set
-# CONFIG_PKG_USING_DCM is not set
-# CONFIG_PKG_USING_EMQ is not set
-# CONFIG_PKG_USING_CFGM is not set
-# CONFIG_PKG_USING_RT_CMSIS_DAP is not set
-# CONFIG_PKG_USING_SMODULE is not set
-# CONFIG_PKG_USING_SNFD is not set
-# CONFIG_PKG_USING_UDBD is not set
-# CONFIG_PKG_USING_BENCHMARK is not set
-# CONFIG_PKG_USING_UBJSON is not set
-# CONFIG_PKG_USING_DATATYPE is not set
-# CONFIG_PKG_USING_FASTFS is not set
-# CONFIG_PKG_USING_RIL is not set
-# CONFIG_PKG_USING_WATCH_DCM_SVC is not set
-# CONFIG_PKG_USING_WATCH_APP_FWK is not set
-# CONFIG_PKG_USING_GUI_TEST is not set
-# CONFIG_PKG_USING_PMEM is not set
-# CONFIG_PKG_USING_LWRDP is not set
-# CONFIG_PKG_USING_MASAN is not set
-# CONFIG_PKG_USING_BSDIFF_LIB is not set
-# CONFIG_PKG_USING_PRC_DIFF is not set
+# CONFIG_PKG_USING_ARDUINO_ULTRASOUND_RADAR is not set
+# CONFIG_PKG_USING_ARDUINO_SENSOR_KIT is not set
+# CONFIG_PKG_USING_ARDUINO_MATLAB_SUPPORT is not set
+# end of Projects
 
 #
-# RT-Thread Smart
+# Sensors
 #
-# CONFIG_PKG_USING_UKERNEL is not set
-# CONFIG_PKG_USING_TRACE_AGENT is not set
+# CONFIG_PKG_USING_ARDUINO_SENSOR_DEVICE_DRIVERS is not set
+# CONFIG_PKG_USING_ARDUINO_CAPACITIVESENSOR is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ADXL375 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_VL53L0X is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_VL53L1X is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SENSOR is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_VL6180X is not set
+# CONFIG_PKG_USING_ADAFRUIT_MAX31855 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MAX31865 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MAX31856 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MAX6675 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MLX90614 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LSM9DS1 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AHTX0 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LSM9DS0 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BMP280 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ADT7410 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BMP085 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BME680 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MCP9808 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MCP4728 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_INA219 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LTR390 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ADXL345 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_DHT is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MCP9600 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LSM6DS is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BNO055 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MAX1704X is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MMC56X3 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MLX90393 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MLX90395 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ICM20X is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_DPS310 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_HTS221 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SHT4X is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SHT31 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ADXL343 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BME280 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AS726X is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AMG88XX is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AM2320 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AM2315 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LTR329_LTR303 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BMP085_UNIFIED is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BMP183 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BMP183_UNIFIED is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BMP3XX is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MS8607 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LIS3MDL is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MLX90640 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MMA8451 is not set
+# CONFIG_PKG_USING_ADAFRUIT_MSA301 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MPL115A2 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BNO08X is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BNO08X_RVC is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LIS2MDL is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LSM303DLH_MAG is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LC709203F is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_CAP1188 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_CCS811 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_NAU7802 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LIS331 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LPS2X is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LPS35HW is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LSM303_ACCEL is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_LIS3DH is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_PCF8591 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MPL3115A2 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MPR121 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MPRLS is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MPU6050 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_PCT2075 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_PM25AQI is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_EMC2101 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_FXAS21002C is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SCD30 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_FXOS8700 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_HMC5883_UNIFIED is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SGP30 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TMP006 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TLA202X is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TCS34725 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SI7021 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SI1145 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SGP40 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SHTC3 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_HDC1000 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_HTU21DF is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AS7341 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_HTU31D is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SENSORLAB is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_INA260 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TMP007_LIBRARY is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_L3GD20 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TMP117 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TSC2007 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TSL2561 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TSL2591_LIBRARY is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_VCNL4040 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_VEML6070 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_VEML6075 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_VEML7700 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_LIS3DHTR is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_DHT is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_ADXL335 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_ADXL345 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_BME280 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_BMP280 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_H3LIS331DL is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_MMA7660 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_TSL2561 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_PAJ7620 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_VL53L0X is not set
+# CONFIG_PKG_USING_SEEED_ITG3200 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_SHT31 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_HP20X is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_DRV2605L is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_BBM150 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_HMC5883L is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_LSM303DLH is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_TCS3414CS is not set
+# CONFIG_PKG_USING_SEEED_MP503 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_BMP085 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_HIGHTEMP is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_VEML6070 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_SI1145 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_SHT35 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_AT42QT1070 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_LSM6DS3 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_HDC1000 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_HM3301 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_MCP9600 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_LTC2941 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_LDC1612 is not set
+# end of Sensors
+
+#
+# Display
+#
+# CONFIG_PKG_USING_ARDUINO_U8G2 is not set
+# CONFIG_PKG_USING_ARDUINO_U8GLIB_ARDUINO is not set
+# CONFIG_PKG_USING_SEEED_TM1637 is not set
+# end of Display
+
+#
+# Timing
+#
+# CONFIG_PKG_USING_ARDUINO_MSTIMER2 is not set
+# end of Timing
+
+#
+# Data Processing
+#
+# CONFIG_PKG_USING_ARDUINO_KALMANFILTER is not set
+# CONFIG_PKG_USING_ARDUINO_ARDUINOJSON is not set
+# end of Data Processing
+
+#
+# Data Storage
+#
+
+#
+# Communication
+#
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_PN532 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SI4713 is not set
+# end of Communication
+
+#
+# Device Control
+#
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_PCF8574 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_PCA9685 is not set
+# CONFIG_PKG_USING_ARDUINO_SEEED_PCF85063TP is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TPA2016 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_DRV2605 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_DS1841 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_DS3502 is not set
+# end of Device Control
+
+#
+# Other
+#
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MFRC630 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_SI5351 is not set
+# CONFIG_PKG_USING_ARDUINO_RTCLIB is not set
+# end of Other
+
+#
+# Signal IO
+#
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BUSIO is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_TCA8418 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MCP23017 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_ADS1X15 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_AW9523 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MCP3008 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_MCP4725 is not set
+# CONFIG_PKG_USING_ARDUINO_ADAFRUIT_BD3491FS is not set
+# end of Signal IO
+
+#
+# Uncategorized
+#
+# end of Arduino libraries
+# end of RT-Thread online packages
+
 CONFIG_SOC_FAMILY_STM32=y
 CONFIG_SOC_SERIES_STM32F4=y
 
@@ -724,22 +1034,53 @@ CONFIG_SOC_SERIES_STM32F4=y
 #
 CONFIG_SOC_STM32F407VG=y
 
-#
-# Onboard Peripheral Drivers
-#
-
 #
 # On-chip Peripheral Drivers
 #
 CONFIG_BSP_USING_GPIO=y
+CONFIG_BSP_USING_SERIAL=y
 CONFIG_BSP_USING_UART=y
 CONFIG_BSP_USING_UART1=y
-# CONFIG_BSP_UART1_RX_USING_DMA is not set
+CONFIG_BSP_UART1_RX_USING_DMA=y
+CONFIG_BSP_UART1_TX_USING_DMA=y
+CONFIG_BSP_USING_UART2=y
+CONFIG_BSP_UART2_RX_USING_DMA=y
+CONFIG_BSP_UART2_TX_USING_DMA=y
+CONFIG_BSP_USING_UART3=y
+CONFIG_BSP_UART3_RX_USING_DMA=y
+CONFIG_BSP_UART3_TX_USING_DMA=y
+# CONFIG_BSP_USING_UART4 is not set
+# CONFIG_BSP_USING_UART5 is not set
+CONFIG_BSP_USING_UART6=y
+CONFIG_BSP_UART6_RX_USING_DMA=y
+CONFIG_BSP_UART6_TX_USING_DMA=y
 # CONFIG_BSP_USING_SPI is not set
-# CONFIG_BSP_USING_I2C1 is not set
+# CONFIG_BSP_USING_I2C is not set
+CONFIG_BSP_USING_WDT=y
 # CONFIG_BSP_USING_RNG is not set
 # CONFIG_BSP_USING_UDID is not set
+# end of On-chip Peripheral Drivers
 
 #
-# Board extended module Drivers
+# Onboard Peripheral Drivers
 #
+CONFIG_BSP_USING_LED=y
+
+#
+# pin_number = Px * 16 + pin (PA = 0, PB = 1, ... ; pin = 0 ~ 15)
+#
+CONFIG_BSP_LED_RUN_PIN=75
+CONFIG_BSP_LED_ERR_PIN=74
+CONFIG_BSP_LED_COMM_PIN=73
+# CONFIG_BSP_USING_SPI_FLASH is not set
+# CONFIG_BSP_USING_ON_CHIP_FLASH is not set
+
+#
+# Enable File System
+#
+# CONFIG_BSP_USING_SPI_FLASH_LITTLEFS is not set
+# end of Enable File System
+
+# CONFIG_BSP_USING_ETH is not set
+# end of Onboard Peripheral Drivers
+# end of Hardware Drivers Config

bsp/stm32/stm32f407-st-discovery/board/Kconfig

@@ -7,10 +7,6 @@ config SOC_STM32F407VG
     select RT_USING_USER_MAIN
     default y
 
-menu "Onboard Peripheral Drivers"
-
-endmenu
-
 menu "On-chip Peripheral Drivers"
 
     config BSP_USING_GPIO
@@ -18,21 +14,83 @@ menu "On-chip Peripheral Drivers"
         select RT_USING_PIN
         default y
 
+    config BSP_USING_SERIAL
+        bool 
     menuconfig BSP_USING_UART
         bool "Enable UART"
         default y
         select RT_USING_SERIAL
+        select BSP_USING_SERIAL
         if BSP_USING_UART
             config BSP_USING_UART1
                 bool "Enable UART1"
                 default y
-
             config BSP_UART1_RX_USING_DMA
                 bool "Enable UART1 RX DMA"
                 depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
+                default y
+            config BSP_UART1_TX_USING_DMA
+                bool "Enable UART1 TX DMA"
+                depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
+                default y
+            config BSP_USING_UART2
+                bool "Enable UART2"
+                default y
+            config BSP_UART2_RX_USING_DMA
+                bool "Enable UART2 RX DMA"
+                depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
+                default y
+            config BSP_UART2_TX_USING_DMA
+                bool "Enable UART2 TX DMA"
+                depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
+                default y
+            config BSP_USING_UART3
+                bool "Enable UART3"
+                default y
+            config BSP_UART3_RX_USING_DMA
+                bool "Enable UART3 RX DMA"
+                depends on BSP_USING_UART3 && RT_SERIAL_USING_DMA
+                default y  
+            config BSP_UART3_TX_USING_DMA
+                bool "Enable UART3 TX DMA"
+                depends on BSP_USING_UART3 && RT_SERIAL_USING_DMA
+                default y
+            config BSP_USING_UART4
+                bool "Enable UART4"
                 default n
+            config BSP_UART4_RX_USING_DMA
+                bool "Enable UART4 RX DMA"
+                depends on BSP_USING_UART4 && RT_SERIAL_USING_DMA
+                default n  
+            config BSP_UART4_TX_USING_DMA
+                bool "Enable UART4 TX DMA"
+                depends on BSP_USING_UART4 && RT_SERIAL_USING_DMA
+                default n
+            config BSP_USING_UART5
+                bool "Enable UART5"
+                default n
+            config BSP_UART5_RX_USING_DMA
+                bool "Enable UART5 RX DMA"
+                depends on BSP_USING_UART5 && RT_SERIAL_USING_DMA
+                default n  
+            config BSP_UART5_TX_USING_DMA
+                bool "Enable UART5 TX DMA"
+                depends on BSP_USING_UART5 && RT_SERIAL_USING_DMA
+                default n
+            config BSP_USING_UART6
+                bool "Enable UART6"
+                default y
+            config BSP_UART6_RX_USING_DMA
+                bool "Enable UART6 RX DMA"
+                depends on BSP_USING_UART6 && RT_SERIAL_USING_DMA
+                default y  
+            config BSP_UART6_TX_USING_DMA
+                bool "Enable UART6 TX DMA"
+                depends on BSP_USING_UART6 && RT_SERIAL_USING_DMA
+                default y
         endif
 
+
     menuconfig BSP_USING_SPI
         bool "Enable SPI BUS"
         default n
@@ -54,27 +112,133 @@ menu "On-chip Peripheral Drivers"
                 default n
         endif
 
-    menuconfig BSP_USING_I2C1
-        bool "Enable I2C1 BUS (software simulation)"
-        default n
+    menuconfig BSP_USING_I2C
+        bool "Enable I2C BUS (software simulation)"
+        default y
         select RT_USING_I2C
         select RT_USING_I2C_BITOPS
         select RT_USING_PIN
-        if BSP_USING_I2C1
-            config BSP_I2C1_SCL_PIN
-                int "i2c1 scl pin number"
-                range 1 216
-                default 24
-            config BSP_I2C1_SDA_PIN
-                int "I2C1 sda pin number"
-                range 1 216
-                default 25
+        if BSP_USING_I2C
+            config BSP_USING_I2C1
+                bool "Enable I2C1 BUS"
+                if BSP_USING_I2C1
+                    config BSP_I2C1_SCL_PIN
+                        int "i2c1 scl pin number"
+                        range 0 63
+                        default 22
+                    config BSP_I2C1_SDA_PIN
+                        int "I2C1 sda pin number"
+                        range 0 63
+                        default 23
+                endif
         endif
+
+    config BSP_USING_WDT
+        bool "Enable Watchdog Timer"
+        select RT_USING_WDT
+        default y
+    
     source "../libraries/HAL_Drivers/Kconfig"
     
 endmenu
 
-menu "Board extended module Drivers"
+
+menu "Onboard Peripheral Drivers"
+    menuconfig BSP_USING_LED
+        bool "Enable on board LED"
+        default y
+        select RT_USING_PIN
+        select BSP_USING_GPIO
+        if BSP_USING_LED
+            comment "pin_number = Px * 16 + pin (PA = 0, PB = 1, ... ; pin = 0 ~ 15)"
+            config BSP_LED_RUN_PIN
+                int "LED RUN pin number (default: PE11 = 75 )"
+                    range 0 143
+                    default 75
+                
+            config BSP_LED_ERR_PIN
+                int "LED ERR pin number (default: PE10 = 74 )"
+                range 0 143
+                default 74
+
+            config BSP_LED_COMM_PIN 
+                int "LED COMM pin number (default: PE9 = 73 )"
+                range 0 143
+                default 73
+        endif
+            
+
+    config BSP_USING_SPI_FLASH
+        bool "Enable SPI FLASH (W25Q128 spi1)"
+        select BSP_USING_SPI
+        select BSP_USING_SPI1
+        select RT_USING_SFUD
+        select RT_SFUD_USING_SFDP
+        default n
+
+    config BSP_USING_ON_CHIP_FLASH
+        bool "Enable on-chip FLASH"
+        default n
+
+    config BSP_USING_SPI
+        bool
+
+    menu "Enable File System"
+        config BSP_USING_FS
+            bool
+            default n
+
+        config BSP_USING_SPI_FLASH_LITTLEFS
+            bool "Enable SPI-FLASH (LittleFS)"
+            select RT_USING_DFS
+            select RT_USING_DFS_ROMFS
+            select RT_USING_MTD_NOR
+            select BSP_USING_SPI_FLASH            
+            select BSP_USING_FS
+            select RT_USING_FAL
+            select FAL_USING_AUTO_INIT
+            select FAL_PART_HAS_TABLE_CFG
+            select PKG_USING_LITTLEFS
+            default n
+
+    endmenu
+
+
+    config BSP_USING_ETH
+        bool "Enable Ethernet"
+        default n
+        select BSP_USING_EMAC
+        select RT_USING_LWIP
+        select RT_USING_PIN
+        select RT_LWIP_USING_HW_CHECKSUM
+        
+        if BSP_USING_ETH
+            config BSP_USING_ETH_SAL
+                bool "Enable Ethernet with SAL"
+                default y
+                select RT_USING_SAL
+                select SAL_USING_POSIX
+
+            choice 
+                prompt "Choice a PYH"
+                default PHY_USING_LAN8720A
+                config PHY_USING_DP83848C
+                    bool "DP83848C"
+
+                config PHY_USING_LAN8720A
+                    bool "LAN8720A"
+                
+                config PHY_USING_DM9162
+                    bool "DM9162"
+            endchoice
+
+            config PHY_RESET_PIN
+                int "PHY reset pin number (default: PA6 = 6 )"
+                range 0 143
+                default 6
+            comment "pin_number = Px * 16 + pin (PA = 0, PB = 1, ... ; pin = 0 ~ 15)" 
+
+        endif
 
 endmenu
  

bsp/stm32/stm32f407-st-discovery/rtconfig.h

@@ -1,8 +1,7 @@
 #ifndef RT_CONFIG_H__
 #define RT_CONFIG_H__
 
-/* Automatically generated file; DO NOT EDIT. */
-/* RT-Thread Configuration */
+/* Generated by Kconfiglib (https://github.com/ulfalizer/Kconfiglib) */
 
 /* RT-Thread Kernel */
 
@@ -17,11 +16,15 @@
 #define RT_USING_IDLE_HOOK
 #define RT_IDLE_HOOK_LIST_SIZE 4
 #define IDLE_THREAD_STACK_SIZE 256
+#define RT_USING_TIMER_SOFT
+#define RT_TIMER_THREAD_PRIO 4
+#define RT_TIMER_THREAD_STACK_SIZE 512
 
 /* kservice optimization */
 
+#define RT_KSERVICE_USING_STDLIB
+/* end of kservice optimization */
 #define RT_DEBUG
-#define RT_DEBUG_COLOR
 
 /* Inter-Thread communication */
 
@@ -30,6 +33,7 @@
 #define RT_USING_EVENT
 #define RT_USING_MAILBOX
 #define RT_USING_MESSAGEQUEUE
+/* end of Inter-Thread communication */
 
 /* Memory Management */
 
@@ -37,14 +41,17 @@
 #define RT_USING_SMALL_MEM
 #define RT_USING_SMALL_MEM_AS_HEAP
 #define RT_USING_HEAP
+/* end of Memory Management */
 
 /* Kernel Device Object */
 
 #define RT_USING_DEVICE
 #define RT_USING_CONSOLE
 #define RT_CONSOLEBUF_SIZE 128
-#define RT_CONSOLE_DEVICE_NAME "uart1"
+#define RT_CONSOLE_DEVICE_NAME "uart6"
+/* end of Kernel Device Object */
 #define RT_VER_NUM 0x40101
+/* end of RT-Thread Kernel */
 #define ARCH_ARM
 #define RT_USING_CPU_FFS
 #define ARCH_ARM_CORTEX_M
@@ -69,6 +76,12 @@
 #define MSH_USING_BUILT_IN_COMMANDS
 #define FINSH_USING_DESCRIPTION
 #define FINSH_ARG_MAX 10
+#define RT_USING_DFS
+#define DFS_USING_POSIX
+#define DFS_USING_WORKDIR
+#define DFS_FILESYSTEMS_MAX 4
+#define DFS_FILESYSTEM_TYPES_MAX 4
+#define DFS_FD_MAX 16
 
 /* Device Drivers */
 
@@ -78,9 +91,12 @@
 #define RT_SERIAL_USING_DMA
 #define RT_SERIAL_RB_BUFSZ 64
 #define RT_USING_PIN
+#define RT_USING_WDT
 
 /* Using USB */
 
+/* end of Using USB */
+/* end of Device Drivers */
 
 /* C/C++ and POSIX layer */
 
@@ -94,15 +110,22 @@
 
 /* Socket is in the 'Network' category */
 
+/* end of Interprocess Communication (IPC) */
+/* end of POSIX (Portable Operating System Interface) layer */
+/* end of C/C++ and POSIX layer */
 
 /* Network */
 
+/* end of Network */
 
 /* Utilities */
 
+/* end of Utilities */
+/* end of RT-Thread Components */
 
 /* RT-Thread Utestcases */
 
+/* end of RT-Thread Utestcases */
 
 /* RT-Thread online packages */
 
@@ -113,79 +136,150 @@
 
 /* Marvell WiFi */
 
+/* end of Marvell WiFi */
 
 /* Wiced WiFi */
 
+/* end of Wiced WiFi */
+/* end of Wi-Fi */
 
 /* IoT Cloud */
 
+/* end of IoT Cloud */
+/* end of IoT - internet of things */
 
 /* security packages */
 
+/* end of security packages */
 
 /* language packages */
 
 /* JSON: JavaScript Object Notation, a lightweight data-interchange format */
 
+/* end of JSON: JavaScript Object Notation, a lightweight data-interchange format */
 
 /* XML: Extensible Markup Language */
 
+/* end of XML: Extensible Markup Language */
+/* end of language packages */
 
 /* multimedia packages */
 
 /* LVGL: powerful and easy-to-use embedded GUI library */
 
+/* end of LVGL: powerful and easy-to-use embedded GUI library */
 
 /* u8g2: a monochrome graphic library */
 
-
-/* PainterEngine: A cross-platform graphics application framework written in C language */
-
+/* end of u8g2: a monochrome graphic library */
+/* end of multimedia packages */
 
 /* tools packages */
 
+/* end of tools packages */
 
 /* system packages */
 
 /* enhanced kernel services */
 
+/* end of enhanced kernel services */
 
 /* acceleration: Assembly language or algorithmic acceleration packages */
 
+/* end of acceleration: Assembly language or algorithmic acceleration packages */
 
 /* CMSIS: ARM Cortex-M Microcontroller Software Interface Standard */
 
+/* end of CMSIS: ARM Cortex-M Microcontroller Software Interface Standard */
 
 /* Micrium: Micrium software products porting for RT-Thread */
 
+/* end of Micrium: Micrium software products porting for RT-Thread */
+/* end of system packages */
 
 /* peripheral libraries and drivers */
 
+/* sensors drivers */
+
+/* end of sensors drivers */
+
+/* touch drivers */
+
+/* end of touch drivers */
 
 /* Kendryte SDK */
 
+/* end of Kendryte SDK */
+/* end of peripheral libraries and drivers */
 
 /* AI packages */
 
+/* end of AI packages */
+
+/* Signal Processing and Control Algorithm Packages */
+
+/* end of Signal Processing and Control Algorithm Packages */
 
 /* miscellaneous packages */
 
 /* project laboratory */
 
+/* end of project laboratory */
+
 /* samples: kernel and components samples */
 
+/* end of samples: kernel and components samples */
 
 /* entertainment: terminal games and other interesting software packages */
 
+/* end of entertainment: terminal games and other interesting software packages */
+/* end of miscellaneous packages */
 
-/* Privated Packages of RealThread */
+/* Arduino libraries */
 
 
-/* Network Utilities */
+/* Projects */
 
+/* end of Projects */
 
-/* RT-Thread Smart */
+/* Sensors */
 
+/* end of Sensors */
+
+/* Display */
+
+/* end of Display */
+
+/* Timing */
+
+/* end of Timing */
+
+/* Data Processing */
+
+/* end of Data Processing */
+
+/* Data Storage */
+
+/* Communication */
+
+/* end of Communication */
+
+/* Device Control */
+
+/* end of Device Control */
+
+/* Other */
+
+/* end of Other */
+
+/* Signal IO */
+
+/* end of Signal IO */
+
+/* Uncategorized */
+
+/* end of Arduino libraries */
+/* end of RT-Thread online packages */
 #define SOC_FAMILY_STM32
 #define SOC_SERIES_STM32F4
 
@@ -193,15 +287,40 @@
 
 #define SOC_STM32F407VG
 
-/* Onboard Peripheral Drivers */
-
 /* On-chip Peripheral Drivers */
 
 #define BSP_USING_GPIO
+#define BSP_USING_SERIAL
 #define BSP_USING_UART
 #define BSP_USING_UART1
+#define BSP_UART1_RX_USING_DMA
+#define BSP_UART1_TX_USING_DMA
+#define BSP_USING_UART2
+#define BSP_UART2_RX_USING_DMA
+#define BSP_UART2_TX_USING_DMA
+#define BSP_USING_UART3
+#define BSP_UART3_RX_USING_DMA
+#define BSP_UART3_TX_USING_DMA
+#define BSP_USING_UART6
+#define BSP_UART6_RX_USING_DMA
+#define BSP_UART6_TX_USING_DMA
+#define BSP_USING_WDT
+/* end of On-chip Peripheral Drivers */
 
-/* Board extended module Drivers */
+/* Onboard Peripheral Drivers */
 
+#define BSP_USING_LED
+
+/* pin_number = Px * 16 + pin (PA = 0, PB = 1, ... ; pin = 0 ~ 15) */
+
+#define BSP_LED_RUN_PIN 75
+#define BSP_LED_ERR_PIN 74
+#define BSP_LED_COMM_PIN 73
+
+/* Enable File System */
+
+/* end of Enable File System */
+/* end of Onboard Peripheral Drivers */
+/* end of Hardware Drivers Config */
 
 #endif

bsp/stm32/stm32f429-armfly-v6/board/Kconfig

@@ -93,6 +93,11 @@ menu "On-chip Peripheral Drivers"
                 bool "Enable UART1"
                 default y
 
+            config BSP_UART1_TX_USING_DMA
+                bool "Enable UART1 TX DMA"
+                depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
+                default n
+
             config BSP_UART1_RX_USING_DMA
                 bool "Enable UART1 RX DMA"
                 depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA

bsp/stm32/stm32f429-atk-apollo/board/Kconfig

@@ -99,6 +99,11 @@ menu "On-chip Peripheral Drivers"
                 bool "Enable UART1"
                 default y
 
+            config BSP_UART1_TX_USING_DMA
+                bool "Enable UART1 TX DMA"
+                depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
+                default n
+
             config BSP_UART1_RX_USING_DMA
                 bool "Enable UART1 RX DMA"
                 depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
@@ -108,6 +113,11 @@ menu "On-chip Peripheral Drivers"
                 bool "Enable UART2"
                 default n
 
+            config BSP_UART2_TX_USING_DMA
+                bool "Enable UART2 TX DMA"
+                depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
+                default n
+
             config BSP_UART2_RX_USING_DMA
                 bool "Enable UART2 RX DMA"
                 depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
@@ -116,8 +126,13 @@ menu "On-chip Peripheral Drivers"
             config BSP_USING_UART3
                 bool "Enable UART3"
                 default n
+
+            config BSP_UART3_TX_USING_DMA
+                bool "Enable UART3 TX DMA"
+                depends on BSP_USING_UART3 && RT_SERIAL_USING_DMA
                 depends on !BSP_USING_ETH
-   
+                default n
+
             config BSP_UART3_RX_USING_DMA
                 bool "Enable UART3 RX DMA"
                 depends on BSP_USING_UART3 && RT_SERIAL_USING_DMA

bsp/stm32/stm32f429-fire-challenger/board/Kconfig

@@ -97,6 +97,11 @@ menu "On-chip Peripheral Drivers"
                 bool "Enable UART1"
                 default y
 
+            config BSP_UART1_TX_USING_DMA
+                bool "Enable UART1 TX DMA"
+                depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
+                default n
+
             config BSP_UART1_RX_USING_DMA
                 bool "Enable UART1 RX DMA"
                 depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
@@ -106,6 +111,11 @@ menu "On-chip Peripheral Drivers"
                 bool "Enable UART2"
                 default n
 
+            config BSP_UART2_TX_USING_DMA
+                bool "Enable UART2 TX DMA"
+                depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
+                default n
+
             config BSP_UART2_RX_USING_DMA
                 bool "Enable UART2 RX DMA"
                 depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA

bsp/stm32/stm32f429-st-disco/board/Kconfig

@@ -32,6 +32,11 @@ menu "On-chip Peripheral Drivers"
                 bool "Enable UART1"
                 default y
 
+            config BSP_UART1_TX_USING_DMA
+                bool "Enable UART1 TX DMA"
+                depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
+                default n
+
             config BSP_UART1_RX_USING_DMA
                 bool "Enable UART1 RX DMA"
                 depends on BSP_USING_UART1 && RT_SERIAL_USING_DMA
@@ -41,6 +46,11 @@ menu "On-chip Peripheral Drivers"
                 bool "Enable UART2"
                 default n
 
+            config BSP_UART2_TX_USING_DMA
+                bool "Enable UART2 TX DMA"
+                depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA
+                default n
+
             config BSP_UART2_RX_USING_DMA
                 bool "Enable UART2 RX DMA"
                 depends on BSP_USING_UART2 && RT_SERIAL_USING_DMA

components/drivers/Kconfig

@@ -34,6 +34,10 @@ menuconfig RT_USING_SERIAL
                 bool "RT_USING_SERIAL_V1"
             config RT_USING_SERIAL_V2
                 bool "RT_USING_SERIAL_V2"
+            config RT_USING_SERIAL_X
+                bool "RT_USING_SERIAL_X"
+                help
+                    A serial driver that supporting True NonBlock.
         endchoice
         config RT_SERIAL_USING_DMA
             bool "Enable serial DMA mode"
@@ -41,8 +45,36 @@ menuconfig RT_USING_SERIAL
 
         config RT_SERIAL_RB_BUFSZ
             int "Set RX buffer size"
-            depends on !RT_USING_SERIAL_V2
+            depends on RT_USING_SERIAL_V1
             default 64
+
+        if RT_USING_SERIAL_X
+            config RT_SERIAL_FIFO_BUFSZ
+                int "Set SerialX FIFO buffer size"
+                default 128
+                help
+                    suggestion: RT_SERIAL_FIFO_BUFSZ == 2^N
+                    and RT_SERIAL_FIFO_BUFSZ >= 2*RT_SERIAL_DMA_BUFSZ
+
+            config RT_SERIAL_DMA_BUFSZ
+                int "Set SerialX DMA buffer size"
+                depends on RT_SERIAL_USING_DMA
+                default 64
+                help
+                    suggestion: RT_SERIAL_DMA_BUFSZ == 2^N
+                    and RT_SERIAL_FIFO_BUFSZ >= 2*RT_SERIAL_DMA_BUFSZ
+
+            config RT_SERIAL_HARD_FIFO
+                bool "Using Hard FIFO"
+                default n
+                help
+                    Useful only if the chip supported
+                    eg: NUC970 N9H30 serial chips
+                        The UART1/2/4/6/8/10 is built-in with a 64-byte transmitter FIFO (TX_FIFO)
+                        and a 64-byte receiver FIFO (RX_FIFO),
+                        and the UART0/3/5/7/9 are equipped 16-byte transmitter FIFO (TX_FIFO)
+                        and 16-byte receiver FIFO (RX_FIFO).
+        endif
     endif
 
 config RT_USING_CAN

components/drivers/include/drivers/serialX.h

@@ -0,0 +1,216 @@
+/*
+ * Copyright (c) 2006-2021, RT-Thread Development Team
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2022-04-10     THEWON       serialX first version
+ * 2022-06-08     THEWON       add No TX Empty interrupt support
+ * 2023-02-15     THEWON       add init ops
+ */
+
+#ifndef __SERIALX_H__
+#define __SERIALX_H__
+
+#include <rtthread.h>
+#include <rtdevice.h>
+
+#define BAUD_RATE_2400                  2400
+#define BAUD_RATE_4800                  4800
+#define BAUD_RATE_9600                  9600
+#define BAUD_RATE_19200                 19200
+#define BAUD_RATE_38400                 38400
+#define BAUD_RATE_57600                 57600
+#define BAUD_RATE_115200                115200
+#define BAUD_RATE_230400                230400
+#define BAUD_RATE_460800                460800
+#define BAUD_RATE_921600                921600
+#define BAUD_RATE_2000000               2000000
+#define BAUD_RATE_3000000               3000000
+
+#define DATA_BITS_5                     5
+#define DATA_BITS_6                     6
+#define DATA_BITS_7                     7
+#define DATA_BITS_8                     8
+#define DATA_BITS_9                     9
+
+#define STOP_BITS_1                     0
+#define STOP_BITS_2                     1
+#define STOP_BITS_3                     2
+#define STOP_BITS_4                     3
+
+#ifdef _WIN32
+#include <windows.h>
+#else
+#define PARITY_NONE                     0
+#define PARITY_ODD                      1
+#define PARITY_EVEN                     2
+#endif
+
+#define BIT_ORDER_LSB                   0
+#define BIT_ORDER_MSB                   1
+
+#define NRZ_NORMAL                      0       /* Non Return to Zero : normal mode */
+#define NRZ_INVERTED                    1       /* Non Return to Zero : inverted mode */
+
+#ifndef RT_SERIAL_FIFO_BUFSZ
+#define RT_SERIAL_FIFO_BUFSZ            128
+#endif
+
+#ifndef RT_SERIAL_DMA_BUFSZ
+#define RT_SERIAL_DMA_BUFSZ             32
+#endif
+
+#if RT_SERIAL_DMA_BUFSZ < 32
+#define RT_SERIAL_DMA_BUFSZ             32
+#endif
+
+#if RT_SERIAL_FIFO_BUFSZ < (RT_SERIAL_DMA_BUFSZ*2)
+#define RT_SERIAL_FIFO_BUFSZ            RT_SERIAL_DMA_BUFSZ*2
+#endif
+
+
+#define RT_SERIAL_EVENT_RX_IND          0x01    /* Rx indication */
+#define RT_SERIAL_EVENT_TX_DONE         0x02    /* Tx complete   */
+#define RT_SERIAL_EVENT_RX_DMADONE      0x03    /* Rx DMA transfer done */
+#define RT_SERIAL_EVENT_TX_DMADONE      0x04    /* Tx DMA transfer done */
+#define RT_SERIAL_EVENT_RX_TIMEOUT      0x05    /* Rx timeout    */
+
+#define RT_SERIAL_DMA_RX                0x01
+#define RT_SERIAL_DMA_TX                0x02
+
+#define RT_SERIAL_RX_INT                0x01
+#define RT_SERIAL_TX_INT                0x02
+
+#define RT_SERIAL_ERR_OVERRUN           0x01
+#define RT_SERIAL_ERR_FRAMING           0x02
+#define RT_SERIAL_ERR_PARITY            0x03
+
+#define RT_SERIAL_TX_DATAQUEUE_SIZE     2048
+#define RT_SERIAL_TX_DATAQUEUE_LWM      30
+
+#define RT_SERIAL_FLOWCONTROL_CTSRTS     1
+#define RT_SERIAL_FLOWCONTROL_NONE       0
+
+/* Default config for serial_configure structure */
+#define RT_SERIAL_CONFIG_DEFAULT           \
+{                                          \
+    BAUD_RATE_115200, /* 115200 bits/s */  \
+    DATA_BITS_8,      /* 8 databits */     \
+    STOP_BITS_1,      /* 1 stopbit */      \
+    PARITY_NONE,      /* No parity  */     \
+    BIT_ORDER_LSB,    /* LSB first sent */ \
+    NRZ_NORMAL,       /* Normal mode */    \
+    RT_SERIAL_FIFO_BUFSZ, /* Buffer size */  \
+    RT_SERIAL_FLOWCONTROL_NONE, /* Off flowcontrol */ \
+    0                                      \
+}
+
+#define RT_SERIAL_EVENT_TXDONE (1 << 0)
+#define RT_SERIAL_EVENT_RXDONE (1 << 1)
+
+//#define RT_SERIAL_USE_EVENT                 // Just for test, maybe using event in the future
+
+struct rt_serial_device;
+
+typedef int (*cb_serial_tx)(struct rt_serial_device *serial, const rt_uint8_t *data, int length);
+typedef int (*cb_serial_rx)(struct rt_serial_device *serial, rt_uint8_t *data, int length);
+
+struct serial_configure
+{
+    rt_uint32_t baud_rate;
+
+    rt_uint32_t data_bits               :4;
+    rt_uint32_t stop_bits               :2;
+    rt_uint32_t parity                  :2;
+    rt_uint32_t bit_order               :1;
+    rt_uint32_t invert                  :1;
+    rt_uint32_t bufsz                   :16;        // unused, move it to struct rt_serial_device
+    rt_uint32_t flowcontrol             :1;
+    rt_uint32_t reserved                :5;
+};
+
+/*
+ * Serial FIFO mode
+ */
+struct rt_serial_fifo
+{
+    rt_uint32_t buf_sz;
+    /* software fifo */
+    rt_uint8_t *buffer;
+
+    rt_uint16_t put_index, get_index;
+
+    rt_bool_t is_full;
+};
+
+struct rt_serial_device
+{
+    struct rt_device          parent;
+
+    const struct rt_uart_ops *ops;
+    struct serial_configure   config;
+    rt_uint32_t bufsz;
+
+    void *serial_rx;
+    void *serial_tx;
+
+#ifdef RT_SERIAL_USING_DMA
+    rt_size_t dma_idx_rx;
+    rt_uint8_t serial_dma_rx[RT_SERIAL_DMA_BUFSZ];
+    rt_uint8_t serial_dma_tx[RT_SERIAL_DMA_BUFSZ];
+#endif
+
+    cb_serial_rx _cb_rx;
+    cb_serial_tx _cb_tx;
+#ifndef RT_SERIAL_USE_EVENT
+    struct rt_completion completion_rx;
+    struct rt_completion completion_tx;
+#else
+    rt_event_t rx_done;
+    rt_event_t tx_done;
+#endif
+};
+typedef struct rt_serial_device rt_serial_t;
+
+/**
+ * uart operators
+ */
+struct rt_uart_ops
+{
+    int (*init)(struct rt_serial_device *serial);
+
+    rt_err_t (*configure)(struct rt_serial_device *serial, struct serial_configure *cfg);
+    rt_err_t (*control)(struct rt_serial_device *serial, int cmd, void *arg);
+
+    int (*putc)(struct rt_serial_device *serial, char c);
+    int (*getc)(struct rt_serial_device *serial);
+    int (*flush)(struct rt_serial_device *serial);
+
+#if defined (RT_SERIAL_NO_TXEIT)
+    rt_bool_t (*is_int_txing)(struct rt_serial_device *serial);
+    void (*start_tx)(struct rt_serial_device *serial, rt_uint8_t ch);
+#else
+    void (*start_tx)(struct rt_serial_device *serial);
+#endif
+    void (*stop_tx)(struct rt_serial_device *serial);
+
+#ifdef RT_SERIAL_USING_DMA
+    rt_bool_t (*is_dma_txing)(struct rt_serial_device *serial);
+    void (*start_dma_tx)(struct rt_serial_device *serial, rt_uint8_t *buf, rt_size_t size);
+    void (*stop_dma_tx)(struct rt_serial_device *serial);
+#endif
+
+    void (*enable_interrupt)(struct rt_serial_device *serial);
+    void (*disable_interrupt)(struct rt_serial_device *serial);
+};
+
+void rt_hw_serial_isr(struct rt_serial_device *serial, int event);
+
+rt_err_t rt_hw_serial_register(struct rt_serial_device *serial,
+                               const char              *name,
+                               rt_uint32_t              flag,
+                               void                    *data);
+
+#endif

components/drivers/include/rtdevice.h

@@ -7,6 +7,7 @@
  * Date           Author       Notes
  * 2012-01-08     bernard      first version.
  * 2014-07-12     bernard      Add workqueue implementation.
+ * 2022-04-10     THEWON       add serialX
  */
 
 #ifndef __RT_DEVICE_H__
@@ -57,7 +58,9 @@ extern "C" {
 #endif /* RT_USING_USB_HOST */
 
 #ifdef RT_USING_SERIAL
-#ifdef RT_USING_SERIAL_V2
+#ifdef RT_USING_SERIAL_X
+#include "drivers/serialX.h"
+#elif defined RT_USING_SERIAL_V2
 #include "drivers/serial_v2.h"
 #else
 #include "drivers/serial.h"

components/drivers/serial/SConscript

@@ -7,6 +7,9 @@ if GetDepend(['RT_USING_SERIAL']):
     if GetDepend(['RT_USING_SERIAL_V2']):
         src = Glob('serial_v2.c')
         group = DefineGroup('DeviceDrivers', src, depend = ['RT_USING_SERIAL_V2'], CPPPATH = CPPPATH)
+    elif  GetDepend(['RT_USING_SERIAL_X']):
+        src = Glob('serialX.c')
+        group = DefineGroup('DeviceDrivers', src, depend = ['RT_USING_SERIAL_X'], CPPPATH = CPPPATH)
     else:
         src = Glob('serial.c')
         group = DefineGroup('DeviceDrivers', src, depend = ['RT_USING_SERIAL'], CPPPATH = CPPPATH)

components/drivers/serial/serialX-doc/serialX User Manual.md

@@ -0,0 +1,124 @@
+## serialX User Manual
+
+serialX 驱动框架在尽量延续 v1 版使用方法的前提下，增加阻塞和非阻塞操作，同时对 DMA 收发缓冲机制进行了调整。
+
+RT-Thread 论坛上有几篇介绍和讲解 serialX 的文章，使用 serialX 前请先了解它。
+
+如果用分层理论解释 serialX ，那么它可以划分成应用层、中间驱动框架层、底层硬件层。这三层各有分工，又相互影响。
+
+硬件是千变万化的，驱动的一个职责就是把千变万化的硬件进行包装，把共性的行为固化出来，交给应用层使用。
+
+
+### 串口驱动框架和硬件底层接口功能定义详解
+
+```
+struct rt_uart_ops
+{
+    // 配置外设寄存器设置默认波特率等；外设时钟配置、引脚功能复用（如果还没配置过）；启用外设等等
+    int (*init)(struct rt_serial_device *serial);
+    // 仅仅用于配置外设波特率、数据位数、停止位等等
+    rt_err_t (*configure)(struct rt_serial_device *serial, struct serial_configure *cfg);
+    // 用于使能禁用中断，初始配置 DMA
+    rt_err_t (*control)(struct rt_serial_device *serial, int cmd, void *arg);
+    // 串口外设“写数据寄存器”*为空*，把数据放入“写数据寄存器”。*不为空*，死等
+    int (*putc)(struct rt_serial_device *serial, char c);
+    // 串口外设“读数据寄存器”*不为空*，读出“读数据寄存器”的值。*为空*，返回 -1
+    int (*getc)(struct rt_serial_device *serial);
+
+    // 启动发送，多数是使能串口外设“发送寄存器”*空*中断
+    void (*start_tx)(struct rt_serial_device *serial);
+    // 结束发送，多数是禁止串口外设“发送寄存器”*空*中断
+    void (*stop_tx)(struct rt_serial_device *serial);
+
+#ifdef RT_SERIAL_USING_DMA
+    // 判断 DMA 是否在发送过程中，必须有效检测 DMA 是否在发送数据中，有些芯片有寄存器位标志，可以用标志位判断，如果没有，使用变量标志。
+    rt_bool_t (*is_dma_txing)(struct rt_serial_device *serial);
+    // 启动 DMA 发送，数据缓存首地址和数据长度由驱动框架提供。（最后置位 DMA tx 标志）
+    void (*start_dma_tx)(struct rt_serial_device *serial, rt_uint8_t *buf, rt_size_t size);
+    // 停止 DMA 发送，停用 DMA 发送，（最后复位 DMA tx 标志）
+    void (*stop_dma_tx)(struct rt_serial_device *serial);
+#endif
+    // 使能串口外设中断，添加这个的初衷是减少全局中断开关操作。目前这部分代码已被注释并使用 rt_hw_interrupt_enable
+    void (*enable_interrupt)(struct rt_serial_device *serial);
+    // 禁用串口外设中断，添加这个的初衷是减少全局中断开关操作。目前这部分代码已被注释并使用 rt_hw_interrupt_disable
+    void (*disable_interrupt)(struct rt_serial_device *serial);
+};
+```
+
+其中，`control` 是一个多功能扩展接口，目前支持的 `cmd` 包括：
+- `RT_DEVICE_CTRL_OPEN`： 先清理一些可能出现的中断，最后配置并使能外设中断
+- `RT_DEVICE_CTRL_CLOSE`： 禁止外设中断，清理中断，卸载外设
+- `RT_DEVICE_CTRL_CLR_INT`： 定向禁止中断，包括接收中断，接收通道 DMA 中断，发送通道 DMA 中断
+- `RT_DEVICE_CTRL_SET_INT`： 定向使能中断，包括接收中断，接收通道 DMA 中断，发送通道 DMA 中断
+- `RT_DEVICE_CTRL_CONFIG`： 这部分主要是初始化配置接收通道 DMA 和发送通道 DMA。
+
+`enable_interrupt` `disable_interrupt` 两个接口是一组很细腻的操作，但是有些外设如果用中断方式，有些用 DMA 方式。这时候需要区别当前外设是否使用了 DMA ，是否需要操作 DMA 中断。（某外设 “是否支持 DMA 收发” 和外设 “使用了 DMA 收发” 是两个概念）
+
+PS: `control` 好像是无所不能的，有了它，为什么还要添加 `init` `start_tx` `stop_tx` `enable_interrupt` `disable_interrupt`？
+
+#### `rt_hw_serial_isr` 中断回调函数怎么调用？
+
+在 serialX 里只关心五种中断，
+1. “接收寄存器不空” `rt_hw_serial_isr(serial, RT_SERIAL_EVENT_TX_DONE);`
+2. “发送寄存器空” `rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);`
+3. “接收通道空闲” `rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_DMADONE | (dma_cnt << 8));`
+4. “接收通道 DMA 半/全中断” `rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_DMADONE | (dma_cnt << 8));`
+5. “发送通道 DMA 发送完成中断” `rt_hw_serial_isr(&uart->serial, RT_SERIAL_EVENT_TX_DMADONE);`
+
+其中，dma_cnt 是 DMA 接收缓存中已接收数据字节数。
+
+前两个用于中断收发，后三个用于 DMA 收发。
+
+> 注：其它异常错误中断，或者清理掉，或者转入其它流程，这些不在 serialX 驱动考虑范围内。
+
+### 重新定义 `rt_serial_device` 定义：
+
+```
+struct rt_serial_device
+{
+    struct rt_device          parent;
+
+    const struct rt_uart_ops *ops;
+    struct serial_configure   config;
+    rt_uint32_t bufsz;          // 驱动层收发缓存容量大小
+
+    void *serial_rx;            // 串口接收缓存
+    void *serial_tx;            // 串口发送缓存
+
+#ifdef RT_SERIAL_USING_DMA                          // 串口收发缓存和 DMA 使用的二级缓存分开
+    rt_size_t dma_idx_rx;
+    rt_uint8_t serial_dma_rx[RT_SERIAL_DMA_BUFSZ];  // DMA 接收缓存
+    rt_uint8_t serial_dma_tx[RT_SERIAL_DMA_BUFSZ];  // DMA 发送缓存
+#endif
+
+    cb_serial_tx _cb_tx;        // 写过程回调函数指针
+    cb_serial_rx _cb_rx;        // 读过程回调函数指针
+
+    struct rt_completion completion_tx;             // 发送完成
+    struct rt_completion completion_rx;             // 接收到新数据
+};
+typedef struct rt_serial_device rt_serial_t;
+```
+
+在最近的一次修改中，把 `struct serial_configure` 中的 `bufsz` 成员挪到了 `struct rt_serial_device` 。就是为了 open 了设备之后还能修改波特率，而且，修改缓存大小的功能可以挪到 `control` 里，达到 open 设备之后还能修改缓存大小的目地。
+
+### 之前写过的文章汇总
+
+#### 理论类
+
+- [rt-thread 驱动篇 之 串口驱动框架剖析及性能提升](https://club.rt-thread.org/ask/article/0ee3da5b6a9c347d.html) 这里是 serialX 的理论基础，之后的所有工作都是这些想法的实现。
+- [rt-thread 驱动篇 之 serialX 全网公测](https://club.rt-thread.org/ask/article/bfd92159ba11aef6.html) 这是第一次在 stm32 上实现并进行的测试，内含测试代码。 `struct rt_uart_ops` 结构体接口定义有很详细的注释，在新的芯片上写底层驱动时，这些注释说明很重要，一定严格按照这些接口定义的功能进行实现。
+
+#### 实践类
+
+- [rt-thread 驱动篇（五）serialX 小试牛刀](http://www.elecfans.com/d/1849301.html) 这是在控制台串口上使用 serialX 的实践。
+以及，[rt-thread 驱动篇（六）serialX弊端及解决方法](https://www.elecfans.com/d/1850548.html) 会告诉你在控制台上使用**中断/DMA**收发模式时，可能遇到的尴尬问题以及怎么去避免它们。
+- [测试 serialX 的 posix 支持](https://club.rt-thread.org/ask/article/e7b067264f6badfe.html) 这里是 posix 接口测试。内含测试代码
+- [基于 serialX 串口驱动移植 libmodbus](https://club.rt-thread.org/ask/article/91437d9031d4ac5a.html) 这篇是使用 serialX 驱动跑的 libmodbus 。开启了 posix 之后，serialX 驱动和 libmodbus 配合的还是蛮好的。
+
+### 仓库
+
+最后，serialX 的[源码仓库](https://gitee.com/thewon/serialX) ，里面有一份儿移植说明文档，以及两个测试程序。我们可以从测试程序里看到所有的用法。
+
+目前已经实现了几种芯片底层驱动，想移植到其它芯片上，可以参考。
+

include/rtdef.h

@@ -41,6 +41,7 @@
  * 2022-01-01     Gabriel      improve hooking method
  * 2022-01-07     Gabriel      move some __on_rt_xxxxx_hook to dedicated c source files
  * 2022-01-12     Meco Man     remove RT_THREAD_BLOCK
+ * 2022-04-10     THEWON       add flush for device & some device flags
  * 2022-04-20     Meco Man     change version number to v4.1.1
  * 2022-04-21     THEWON       add macro RT_VERSION_CHECK
  * 2022-06-29     Meco Man     add RT_USING_LIBC and standard libc headers
@@ -1010,6 +1011,10 @@ enum rt_device_class_type
 #define RT_DEVICE_OFLAG_WRONLY          0x002           /**< write only access */
 #define RT_DEVICE_OFLAG_RDWR            0x003           /**< read and write */
 #define RT_DEVICE_OFLAG_OPEN            0x008           /**< device is opened */
+
+#define RT_DEVICE_OFLAG_BLOCKING        0x000           /**< blocking io mode */
+#define RT_DEVICE_OFLAG_NONBLOCKING     0x004           /**< non-blocking io mode */
+
 #define RT_DEVICE_OFLAG_MASK            0xf0f           /**< mask of open flag */
 
 /**
@@ -1019,10 +1024,14 @@ enum rt_device_class_type
 #define RT_DEVICE_CTRL_SUSPEND          0x02            /**< suspend device */
 #define RT_DEVICE_CTRL_CONFIG           0x03            /**< configure device */
 #define RT_DEVICE_CTRL_CLOSE            0x04            /**< close device */
-
-#define RT_DEVICE_CTRL_SET_INT          0x10            /**< set interrupt */
-#define RT_DEVICE_CTRL_CLR_INT          0x11            /**< clear interrupt */
-#define RT_DEVICE_CTRL_GET_INT          0x12            /**< get interrupt status */
+#define RT_DEVICE_CTRL_NOTIFY_SET       0x05            /**< set notify func */
+#define RT_DEVICE_CTRL_SET_INT          0x06            /**< set interrupt */
+#define RT_DEVICE_CTRL_CLR_INT          0x07            /**< clear interrupt */
+#define RT_DEVICE_CTRL_GET_INT          0x08            /**< get interrupt status */
+#define RT_DEVICE_CTRL_CONSOLE_OFLAG    0x09            /**< get console open flag */
+#define RT_DEVICE_CTRL_OPEN             0x0A            /**< open device */
+#define RT_DEVICE_CTRL_BLOCKING         0x0B            /**< blocking io */
+#define RT_DEVICE_CTRL_MASK             0x1f            /**< mask for contrl commands */
 
 /**
  * device control
@@ -1055,6 +1064,7 @@ struct rt_device_ops
     rt_size_t (*read)   (rt_device_t dev, rt_off_t pos, void *buffer, rt_size_t size);
     rt_size_t (*write)  (rt_device_t dev, rt_off_t pos, const void *buffer, rt_size_t size);
     rt_err_t  (*control)(rt_device_t dev, int cmd, void *args);
+    rt_err_t  (*flush)  (rt_device_t dev);
 };
 #endif /* RT_USING_DEVICE_OPS */
 
@@ -1096,6 +1106,7 @@ struct rt_device
     rt_size_t (*read)   (rt_device_t dev, rt_off_t pos, void *buffer, rt_size_t size);
     rt_size_t (*write)  (rt_device_t dev, rt_off_t pos, const void *buffer, rt_size_t size);
     rt_err_t  (*control)(rt_device_t dev, int cmd, void *args);
+    rt_err_t  (*flush)  (rt_device_t dev);
 #endif /* RT_USING_DEVICE_OPS */
 
 #ifdef RT_USING_POSIX_DEVIO

include/rtthread.h

@@ -519,6 +519,12 @@ rt_size_t rt_device_write(rt_device_t dev,
                           const void *buffer,
                           rt_size_t   size);
 rt_err_t  rt_device_control(rt_device_t dev, int cmd, void *arg);
+rt_err_t rt_device_flush(rt_device_t dev);
+#ifdef RT_USING_DM
+rt_err_t rt_device_bind_driver(rt_device_t device, rt_driver_t driver, void *node);
+rt_device_t rt_device_create_since_driver(rt_driver_t drv,int device_id);
+rt_err_t rt_device_probe_and_init(rt_device_t device);
+#endif
 
 /**@}*/
 #endif

src/device.c

@@ -13,6 +13,7 @@
  * 2013-07-09     Grissiom     add ref_count support
  * 2016-04-02     Bernard      fix the open_flag initialization issue.
  * 2021-03-19     Meco Man     remove rt_device_init_all()
+ * 2022-04-10     THEWON       add flush for device
  */
 
 #include <rtthread.h>
@@ -28,6 +29,7 @@
 #define device_close    (dev->ops->close)
 #define device_read     (dev->ops->read)
 #define device_write    (dev->ops->write)
+#define device_flush    (dev->ops->flush)
 #define device_control  (dev->ops->control)
 #else
 #define device_init     (dev->init)
@@ -35,6 +37,7 @@
 #define device_close    (dev->close)
 #define device_read     (dev->read)
 #define device_write    (dev->write)
+#define device_flush    (dev->flush)
 #define device_control  (dev->control)
 #endif /* RT_USING_DEVICE_OPS */
 
@@ -290,7 +293,11 @@ rt_err_t rt_device_close(rt_device_t dev)
 
     /* set open flag */
     if (result == RT_EOK || result == -RT_ENOSYS)
+    {
         dev->open_flag = RT_DEVICE_OFLAG_CLOSE;
+        dev->rx_indicate = RT_NULL;
+        dev->tx_complete = RT_NULL;
+    }
 
     return result;
 }
@@ -382,6 +389,33 @@ rt_size_t rt_device_write(rt_device_t dev,
 }
 RTM_EXPORT(rt_device_write);
 
+/**
+ * @brief This function will flush a device's buffers.
+ *
+ * @param dev is the pointer of device driver structure.
+ *
+ * @return the result, RT_EOK on successfully.
+ */
+rt_err_t rt_device_flush(rt_device_t dev)
+{
+    RT_ASSERT(dev != RT_NULL);
+    RT_ASSERT(rt_object_get_type(&dev->parent) == RT_Object_Class_Device);
+
+    if (dev->ref_count == 0)
+    {
+        return -RT_ERROR;
+    }
+
+    /* call device_write interface */
+    if (device_flush != RT_NULL)
+    {
+        return device_flush(dev);
+    }
+
+    return -RT_ENOSYS;
+}
+RTM_EXPORT(rt_device_flush);
+
 /**
  * @brief This function will perform a variety of control functions on devices.
  *
@@ -457,4 +491,87 @@ rt_err_t rt_device_set_tx_complete(rt_device_t dev,
 }
 RTM_EXPORT(rt_device_set_tx_complete);
 
+#ifdef RT_USING_DM
+/**
+ * This function  bind drvier and device
+ *
+ * @param driver the pointer of driver structure
+ * @param device the pointer of device structure
+ * @param node the pointer of fdt node structure
+ *
+ * @return the error code, RT_EOK on successfully.
+ */
+rt_err_t rt_device_bind_driver(rt_device_t device, rt_driver_t driver, void *node)
+{
+    if((!driver) || (!device))
+    {
+        return -RT_EINVAL;
+    }
+
+    device->drv = driver;
+#ifdef RT_USING_DEVICE_OPS
+    device->ops = driver->dev_ops;
+#endif
+    device->dtb_node = node;
+
+    return RT_EOK;
+}
+RTM_EXPORT(rt_device_bind_driver);
+
+/**
+ * This function  create rt_device according to driver infomation
+ *
+ * @param drv the pointer of driver structure
+ * @param device_id specify the ID of the rt_device
+ *
+ * @return the error code, RT_EOK on successfully.
+ */
+rt_device_t rt_device_create_since_driver(rt_driver_t drv,int device_id)
+{
+    rt_device_t device;
+    if (!drv)
+    {
+        return RT_NULL;
+    }
+
+    device = (rt_device_t)rt_calloc(1,drv->device_size);
+    if(device == RT_NULL)
+    {
+        return RT_NULL;
+    }
+    device->device_id = device_id;
+    rt_snprintf(device->parent.name, sizeof(device->parent.name), "%s%d", drv->name, device_id);
+    return device;
+}
+RTM_EXPORT(rt_device_create_since_driver);
+
+/**
+ * This function  rt_device probe and init
+ *
+ * @param device the pointer of rt_device structure
+ * @return the error code, RT_EOK on successfully.
+ */
+rt_err_t rt_device_probe_and_init(rt_device_t device)
+{
+    int ret = -RT_ERROR;
+    if (!device)
+    {
+        return -RT_EINVAL;
+    }
+    if(!device->drv)
+    {
+        return -RT_ERROR;
+    }
+    if(device->drv->probe)
+    {
+        ret = device->drv->probe((rt_device_t)device);
+    }
+    if(device->drv->probe_init)
+    {
+        ret = device->drv->probe_init((rt_device_t)device);
+    }
+    return ret;
+}
+RTM_EXPORT(rt_device_probe_and_init);
+#endif /* RT_USING_DM */
 #endif /* RT_USING_DEVICE */