e97ba95f71
[libc][unistd.h] define F_OK
2023-01-02 15:01:20 -05:00
4ce39dd744
[libc][time] 修正POSIX 时间相关函数返回值错误
2022-12-29 20:23:33 -05:00
8a71ae75ad
[BSP][smart] fix link script for smart in vexpress-a9 ( #6764 )
2022-12-29 15:18:36 +08:00
b1763e6903
[sensor] add setting power/accuracy/fetch data mode commands
2022-12-26 02:10:30 -05:00
3a7ee55780
[sensor] 优化control参数检查和sensor list命令
2022-12-26 02:10:30 -05:00
20a6f14e89
use PIN_IRQ_PIN_NONE to replace RT_PIN_NONE
2022-12-26 02:10:30 -05:00
2570fab0e1
[sensor] add sensor list command
2022-12-26 02:10:30 -05:00
d2bab6d7ad
[sensor] add LSC chip vendor
2022-12-26 02:10:30 -05:00
d3c77d907f
[sensor] set power and accuracy as the hightest level
2022-12-26 02:10:30 -05:00
8971545d8e
[sensor] improve commands
2022-12-26 02:10:30 -05:00
1f092da9e0
fix compiling warning.
2022-12-26 14:24:26 +08:00
f4c08cfe36
修改printf格式“%-*.s”为“%-*.*s
2022-12-22 22:51:24 -05:00
262392a69c
[sensor] draft new sensor-hal framework ( #6746 )
...
* [sensor] new sensor framework
针对老版本sensor框架的诸多不合理设计进行重构
之前的PR中已经重构了浮点数相关的问题
本次PR主要围绕sensor的整体架构予以重构，对过于理想化的参数和模式予以删除
* [sensor] 增加can modbus总线类型
* [stm32l745] 完善sensor对接
* [sensor] fix the onchip ID print
2022-12-21 21:24:51 -05:00
e8504c7cf1
[smart/aarch64] code sync ( #6750 )
...
* [smart/aarch64] sync aarch64
2022-12-20 17:49:37 +08:00
2f214d03c0
[fal] fal_rtt.c消除函数strtol()隐含声明的警告
2022-12-19 18:15:40 -05:00
0df51b8aa9
[components][libc] 在rv32下编译时cstring.c中的strtok_r函数与libc.a中的strtok_r重定义,添加rt_weak
2022-12-18 23:38:41 -05:00
68ca9f07a6
[rt-smart] 弱化 RT_USING_LWP，使用 RT_USING_SMART 作为宏配置 ( #6740 )
...
* [dfs] sync cromfs
* [rt-smart]Weaken RT_USING_LWP, use RT_USING_SMART as macro configuration
* [format] fix some format issue.
2022-12-16 18:38:28 +08:00
4246275e6e
add "\n" to cat
2022-12-15 11:34:00 -05:00
ee632c21a8
fix:三字节读命令0x03，四字节读命令0x13，当命令为0x03需要加上0x10
2022-12-15 01:08:21 -05:00
0bc01ad0d9
[dfs] sync cromfs ( #6739 )
2022-12-14 22:28:34 +08:00
89c3bf5f92
ESP32_C3: Improve Readme, fix compile errors/warnings
2022-12-13 11:50:29 +08:00
9860b168b8
[sensor] 增加新传感器类型和单位
2022-12-12 22:44:07 -05:00
2aa600e01b
[components] fix compiling warning ( #6733 )
2022-12-13 09:44:45 +08:00
aa0c8b4a93
[components] fix format issue
2022-12-12 20:24:10 -05:00
8b5a501831
[sensor][cmd] add sensor_get_type/vender/unit_name functions ( #6727 )
...
* [sensor][cmd] add sensor_get_type/vender/unit_name functions
* rename sensor folder
2022-12-11 22:45:04 -05:00
99bdf978d7
[rtdef] use lower-case to define attributes ( #6728 )
...
* [rtdef] rename RT_WEAK attribute as rt_weak
* [rtdef] rename RT_USED attribute as rt_used
* [rtdef] rename RT_SECTION attribute as rt_section
* [rtdef] rename ALIGN attribute as rt_align
* [legacy] add RT_USED ALIGN RT_SECTION RT_WEAK as legacy support
2022-12-11 13:12:03 -05:00
a4b8762d85
[sfud] sync commit
...
db9a1746df
2022-12-11 01:35:45 -05:00
e991be9c51
[smart][risc-v/libcpu] port rv64 cpu code ( #6704 )
...
* [risc-v/libcpu] porting Smart & RTOS
* [fix] rv64 plic
* [risc-v/rv64] remove macro in rtdef
2022-12-10 22:16:42 +08:00
b5d77bbf37
[rtsmart] fix uart can't input after userapp exited at rv64 platform.
2022-12-09 07:54:29 -05:00
2e488e0440
[rt-smart]同步 gitee nanosleep 修复 ( #6710 )
2022-12-08 10:02:40 -05:00
6fcbd418e5
canfd帧结构加入 brs控制位 ( #6701 )
2022-12-07 01:49:44 -05:00
a535218ba6
[shell]list_mutex show suspended Threads
2022-12-06 21:15:13 -05:00
eb66f2c964
fix system muti-define when enable RT_USING_MODULE
2022-12-06 20:53:20 -05:00
2cc9bd7936
[components/finsh]使 list 命令的解释对齐
2022-12-06 20:53:01 -05:00
f54f2c2c91
[ymodem]添加传输过程中的异常处理流程
2022-12-05 23:07:27 -05:00
fa1f6c22e5
[fix]修复模拟i2c驱动延时bug
...
Signed-off-by: jaffer <jaffer.work@foxmail.com>
2022-12-05 21:38:02 -05:00
c53d9da22e
[lwIP] fix lwip sem/mutex valid issue.
2022-12-03 14:21:06 -05:00
ecf2d82159
sync branch rt-smart. ( #6641 )
...
* Synchronize the code of the rt mart branch to the master branch.
* TTY device
* Add lwP code from rt-smart
* Add vnode in DFS, but DFS will be re-write for rt-smart
* There are three libcpu for rt-smart:
* arm/cortex-a, arm/aarch64
* riscv64
Co-authored-by: Rbb666 <zhangbingru@rt-thread.com>
Co-authored-by: zhkag <zhkag@foxmail.com>
2022-12-03 12:07:44 +08:00
cef57d006d
[armlibc] 修复AC6更新至6.19后_sys_tmpnam()函数编译报错 ( #6647 )
...
* [armlibc] 修复AC6更新至6.19后_sys_tmpnam()函数编译报错
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
2022-11-24 00:12:48 -05:00
3e2beebe43
[libc][musl]解决signal.h报错的问题
2022-11-22 22:18:26 -05:00
bdd663a33f
[libc][musl] support arm-linux-musleabi toolchain
...
目前基本功能已经可以在QEMU上跑起来，但是pthread和内核signal选中会报冲突。先合并一版本，后续解决这些问题。
2022-11-22 21:40:50 -05:00
569e2ae1e8
[CAN]update struct can_filter_item and rt_can_msg ( #6556 )
...
* 修改ry命令，已便于自定义保存路径
* modified: components/utilities/ymodem/ry_sy.c
* 修复从被动错误恢复后发送返回异常
* 修复在自动重传模式下,ACK异常阻塞线程
- 删除TX中断函数else分支。仅当RQCP位 置一才进入该中断
- 添加SCE中断函数中关于ACK_ERR的else判断。自动重传模式下会进入该判断,打断自动重传释放完成量。
* 增加对于CAN1与CAN2的SCE中断和TX中断的公共处理函数
* formatting格式化代码
* update struct can_filter_item and rt_can_msg
1. 对过滤器号和索引号结构体定义中同一名称hdr进行重命名hdr_bank和hdr_index,
以便准确区分.采用宏定义兼容以前变量名.
2. 添加接收标识rxfifo,已指明是哪个RXFIFO.
* 更正42M下的波特率
* 修复接收获取索引号错误
* 添加接收标识
* 更新注释
* 取消CANFD限制
* update struct can_filter_item and rt_can_msg
2022-11-21 21:45:51 -05:00
84eab69604
[msh] remove list_xxx commands, use 'list' to replace
2022-11-21 21:39:45 -05:00
66411e0828
[sensor] improve cmd
...
using floating print format by default
2022-11-21 21:31:16 -05:00
953a8c265d
add rt_sensor_float_t
2022-11-19 00:54:22 +08:00
df397eb767
[sensor] 传感器数据类型使用float代替rt_uint32_t类型
2022-11-19 00:54:22 +08:00
87be8fdba8
Modified bsp/stm32/libraries/HAL_Drivers/drv_usbd.c
...
Modified components/drivers/usb/usbdevice/class/cdc_vcom.c
修复cdc在v1v2的serial框架下接收发送错误的问题.stm32下usbd添加更多的ep_id,以支持复合设备.
2022-11-14 23:47:49 -05:00
d1c353f6b6
[kernel] 优化Sconscript脚本
2022-11-14 22:20:23 -05:00
6b9bdc12a9
[sensor] use arg to replace user_data
2022-11-14 22:19:47 -05:00
b64f21e628
Update netdev.c
2022-11-14 22:18:41 -05:00
Meco Man
Bernard Xiong
bernard
wdfk-prog
Shell
梁生
Yaochenger
guo
褚仕成
joechenchen
tangzz98
Shell
zhkag
Yohozzy
tangyuxin
yangjie11
jaffer
myshow2258