See `components/drivers/include/drivers/watchdog.h`
maco definition of
RT_DEVICE_CTRL_WDT_GET_TIMEOUT
RT_DEVICE_CTRL_WDT_SET_TIMEOUT
RT_DEVICE_CTRL_WDT_GET_TIMELEFT
The wdt timeout time unit is defined as seconds in the API, but
the code incorrectly uses ms.
Correct this and comply with the API definition.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Reviewed-by: Yuanjie He <943313837@qq.com>
Reviewed-by: Shell <smokewood@qq.com>
This patch improves the efficiency and readability of the AArch64 common setup
code by calculating the `PV_OFFSET` once at the start and reusing the value.
This change reduces redundant calculations.
Signed-off-by: Shell <smokewood@qq.com>
Rewrote the spi driver.
Reuse the driver code from https://github.com/sophgo/cvi_alios_open,
which is Apache 2.0 licenced.
Signed-off-by: flyingcys <flyingcys@163.com>
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
```
./bsp/cvitek/drivers/drv_wdt.c: In function '_wdt_control':
warning: assignment to 'void *' from 'unsigned int' makes pointer
from integer without a cast [-Wint-conversion]
119 | wdt_device->parent.user_data = (rt_uint32_t)(*(rt_uint32_t *)arg);
| ^
warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
122 | *(rt_uint32_t *)arg = (rt_uint32_t)wdt_device->parent.user_data;
| ^
```
Rootcasue: It's not portable to store integar in a pointer.
Solution: use global _wdt_dev to store the timeout value.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Do unmap before shrink so we don't see mapped entry on page table
insertion, which is not acceptable for riscv implementation of
architecture porting.
Changes:
- add un-mapping of pte on `_null_shrink()`
Signed-off-by: Shell <smokewood@qq.com>
[dfs] feat: Mark dirty on unmap for shared mapping
This patch optimizes the pcache varea management by refining the
conditions under which pages are marked dirty, specifically targeting
the unmap operations in the dfs_pcache component. These changes were
necessary to enhance the efficiency of page cache management.
Changes:
- Adjusted include statements in `dfs_pcache.c` for better organization.
- Modified `dfs_aspace_unmap` function:
- Added a check to ensure `varea` is not privately locked before marking a page as dirty.
- Updated `dfs_aspace_page_unmap` function:
- Added a similar check for `varea` lock status before marking a page as dirty.
Signed-off-by: Shell <smokewood@qq.com>
The ADC controller needs to be calibrated during the initialization
phase, otherwise the measured voltage value will be inaccurate.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
In the new design, we require the user to manually enter the
PinName (as a string) in menuconfig instead of being given
menu items to select.
The original method will lead to too many menu item-related
macros being defined in the code, causing ifdef and other
codes scatter everywhere in the driver code, which is
inconvenient to maintain.
The new design adds a pinmux driver module to manage the
multiplexing of pins. This patch provides this driver module.
P.S., the reason why users are allowed to specify pinname
in a string instead of the pin number is mainly because
the technical manual provided by the SOC manufacturer
does not have numbers for some pins, only names.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Reviewed-by: Yuanjie He <943313837@qq.com>
Reviewed-by: Shell <smokewood@qq.com>
The contents of the SOC type part in the Kconfig configuration
are retained, and other parts related to I2C pin multiplexing
selection have been rolled back.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Reviewed-by: Yuanjie He <943313837@qq.com>
Reviewed-by: Shell <smokewood@qq.com>
* [bsp][hpmicro] add weak handle_trap implementation
- added weak handle_trap implementation
Signed-off-by: Fan YANG <fan.yang@hpmicro.com>
* [libcpu][risc-v][common] remove weak handle_trap function
- removed weak handle_trap function from trap_common.c
Signed-off-by: Fan YANG <fan.yang@hpmicro.com>
---------
Signed-off-by: Fan YANG <fan.yang@hpmicro.com>
The changes unify the tick.c implementations for all risc-v64
architectures, leveraging the CPUTIME feature. This refactoring was
necessary to streamline the codebase, and ensure consistent timer
handling across different platforms.
Changes:
- Updated `Kconfig` in `bsp/cvitek/cv18xx_risc-v` to fix formatting issues.
- Updated .config for BSPs to update `CPUTIME_TIMER_FREQ`
- Updated header of for API `riscv_cputime_init`
- Initialized riscv timer on `rt_hw_tick_init`
- Refactored `tick.c` and `tick.h` in `libcpu/risc-v/t-head/c906` and `libcpu/risc-v/virt64`:
- Replaced direct use of `rdtime` with `clock_cpu_gettime`.
- Removed redundant timer frequency definitions.
- Added static assertions to check the value of `CPUTIME_TIMER_FREQ`.
- Initialized `tick_cycles` based on `CPUTIME_TIMER_FREQ`.
- Integrated `ktime` support for tick initialization.
Signed-off-by: Shell <smokewood@qq.com>
Reviewed-on: https://github.com/RT-Thread/rt-thread/pull/9164
Reviewed-by: Chen Wang <unicorn_wang@outlook.com>
feat: [libcpu/c906] support ARCH_REMAP_KERNEL
This change was necessary to enable the remapping of the kernel image to
a high virtual address region on the c906 platform.
Changes:
- Introduced new configuration options `ARCH_REMAP_KERNEL`, and
`ARCH_USING_ASID` under the `ARCH_RISCV64` section.
- Updated MMU initialization and switching functions to incorporate
remapping handling.
- Modified page table setup for proper memory attribute settings.
- Added support for early memory setup, kernel remapping
- Added conditional compilation for ASID support in the `rt_aspace` struct,
since this is not enable currently for most architecture.
Signed-off-by: Shell <smokewood@qq.com>
* [bsp/allwinner] feat: porting to RT_USING_DEVICE_OPS
This patch ports the codebase to use the RT_USING_DEVICE_OPS structure,
which is required by v5.1.0 Smart kernel, improves modularity and makes
it easier to manage device operations by consolidating them into a
single structure, enhancing maintainability and future scalability.
Changes:
- Added RT_USING_DEVICE_OPS conditionals to partition.c and drv_sdmmc.c.
- Defined rt_device_ops structures for partition and sdmmc drivers.
- Updated device initialization to use the ops structure if defined.
- Replaced direct function calls with rt_dev_control, rt_dev_read, and
rt_dev_write macros where applicable.
- Removed redundant us_delay function from os.c.
Signed-off-by: Shell <smokewood@qq.com>
* feat: update configuration
* feat: fixup compiler warning
---------
Signed-off-by: Shell <smokewood@qq.com>
Skip configure on open since all configs are copied from the current
configuration on device. So we don't bother to set it back to device
again.
Changes:
- test and skip configuration on open() of tty device
Signed-off-by: Shell <smokewood@qq.com>
let cmake generator get more param from `rtconfig.py`
* support getting c/cpp standard from c/cpp compilation flags
* support getting post action and conv it to cmake variable
* add a custom cmake file for user custom settings
* support setting project name from `--project-name=` option
Bernard Xiong
Chen Wang
Shell
flyingcys
zhuzhuzhu
zms123456
rcitachi
Fan Yang
wdfk-prog
sakumisu
childerxxx
heyuanjie87
latercomer
Meco Man
LaterComer
LZerro
Rbb666
Kai
Evlers
zhao maosheng