Meco Man
fc04d828ee
[stm32][driver] auto formatted
2021-03-08 22:40:39 +08:00
David Lin
f4a2a00f3d
[bsp/stm32]Fixed typo 'lenth' in drv_eth.c
...
Note that the word 'lenth' is wrong in the output infomation,
so that 'lenth' should been replaced with 'length'.
And floder-> folder in line 22.
2020-02-24 20:54:53 +08:00
xieyangrun
0094765b31
[stm32/libraries/HAL_Drivers/drv_eth.c]fixed read phy SR register return value conflicts with function's parameter
2020-01-15 11:38:35 +08:00
xiaofan
4eb2d7eed0
STM32 Ethernet: Using Timer Instead of Poll Thread
...
Signed-off-by: xiaofan <xfan1024@live.com>
2019-10-29 17:21:18 +08:00
xiaofan
2a9e7c0eea
Fix code style
...
Signed-off-by: xiaofan <xfan1024@live.com>
2019-10-29 17:21:17 +08:00
xiaofan
7676b5e69b
Optimize STM32 Ethernet Drvier
...
1. Add phy_linkchange function to simplify eth_phy_isr and phy_monitor_thread_entry
2. phy_speed is uint8_t may case some problems, use enumeration instead of hardware-dependent values
3. Fix eth_phy_isr can not detect link up
4. Use macro to check phy status for flexibility
Signed-off-by: xiaofan <xfan1024@live.com>
2019-09-03 18:51:09 +08:00
xiaofan
37fe581be4
Fix STM32 Ethernet Driver Spelling Mistake
...
Rename PHY_INTERRUPT_MSAK_REG to PHY_INTERRUPT_MASK_REG
Signed-off-by: xiaofan <xfan1024@live.com>
2019-09-03 18:50:45 +08:00
laoyening
cf4f42ea19
在没插好网线,开发板就上电时,以太网硬件初始化返回失败,导致下一步的以外网DMA环结构和以太网中断都没有被初始化好。等到网线被插好之后,以太网接收数据线程堆栈溢出,程序发生奔溃。
2019-08-12 17:47:52 +08:00
tyustli
2cb74f92fb
add stm32 l475 pwm2 channel3、4 driver
2019-07-26 11:08:58 +08:00
SummerGift
6a9fb353f7
【修改】HAL_ETH_RxCpltCallback 提示等级由 error 修改为 info,因为这是一个非致命的问题
2019-06-10 17:53:49 +08:00
SummerGift
680e3ff70d
【优化】PHY 状态检测流程
2019-06-10 17:49:29 +08:00
SummerGift
7f710f9eab
【修改】changelog for PHY state detection process
2019-06-10 17:30:05 +08:00
SummerGift
44e70b3c0d
【完善】PHY 状态检测驱动
2019-06-10 17:24:00 +08:00
SummerGift
8710b1fd06
【修复】PHY 状态查询过程中的 bug
2019-06-10 15:07:45 +08:00
SummerGift
6309492ec5
【修改】PHY 检测相关处理
2019-05-15 15:45:48 +08:00
SummerGift
960451695b
【修改】 网卡驱动的初始化应当在 lwip 初始化之后以及应用调用网络接口之前,因此修改初始化等级为 device 是比较合适的。
2019-05-08 10:43:25 +08:00
zylx
9818ee2d29
[components][lwip]添加 LWIP 硬件校验和选项,修改 STM32 系列和 rt1052 系列以太网驱动,支持硬件校验和
2019-03-14 16:39:50 +08:00
SummerGift
40a474fefa
[bsp][stm32] optimize eth driver
2019-01-08 14:01:27 +08:00
SummerGift
710f82d46b
[bsp][stm32] optimize falsh && eth driver
2018-12-28 14:16:49 +08:00
SummerGift
11dfedecdc
[bsp][stm32] fix eth bug
2018-12-26 18:15:35 +08:00
SummerGift
7279078005
[bsp][stm32] update drv_eth
2018-12-26 10:17:33 +08:00