libs/rt-thread
libs
/
rt-thread
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
14,514 Commits 14 Branches 40 Tags 973 MiB
Commit Graph

1773 Commits

Author SHA1 Message Date
Meco Man 9b109639d1 [stm32] sconscript typo 2023-01-22 22:07:54 -05:00
liYangYang 6eaf9a9c57
[stm32][qspi] qspi attach 函数问题解决方案 (#6867) 
* [qspi] qspi attach 函数解决方案

* pin

* 更改函数名字
 2023-01-18 22:04:45 -05:00
liYangYang 63294afc9d
[stm32][softspi]soft spi attach函数问题解决方案 (#6868) 
* [softspi]soft spi attach函数问题解决方案

* 更改函数名
 2023-01-18 22:03:48 -05:00
liYangYang 7ff64c1cfd
[stm32][spi] spi attach函数问题解决方案 (#6864) 
attach #6819
 2023-01-18 00:27:08 -05:00
会飞的猪 65f1804005 [bsp/stm32wle5-yizhilian-lm402]修复scons --dist缺失大量文件 2023-01-17 21:32:43 -05:00
会飞的猪 265dbc0ce1 [bsp/stm32wle5-yizhilian-lm401]修复scons --dist缺失大量文件 2023-01-17 21:32:43 -05:00
Zxy c9f7f0e771
[BSP][stm32] fix the compile error 2023-01-16 23:21:21 -05:00
Meco Man ddccef3a64 modify RT_ALIGN_SIZE as 8 by default 2023-01-12 22:47:23 -05:00
Meco Man f4fa7ba970 [RTduino][stm32f469-disco][readme] fix typo 2023-01-13 11:40:57 +08:00
Meco Man 09b36e76f2 [RTduino][stm32f411-nucleo] add English readme 2023-01-13 11:40:57 +08:00
Meco Man baac8760a5 [RTduino][stm32f410-nucleo] add English readme 2023-01-13 11:40:57 +08:00
Meco Man 120595d371 [RTduino][readme] correct grammar 2023-01-13 11:40:57 +08:00
Meco Man b310541471 [env] add scons --strict 
此commit意图在脚本中增加 scons --strict命令，使用该命令编译工程时，会自动将CFLAGS CXXFLAGS设置为 Werrors，即较为严格的编译模式，任何警告都会当做错误来处理。

该命令主要用于CI，在CI执行bsp编译时，可以使用 scons --strict命令。现在QEMU的rtconfig.py 为了CI检查，直接将CFLAGS加上了Werrors，导致正常编译过程中也把警告当做了错误，对日常使用该bsp造成了影响。
 2023-01-12 01:43:44 -05:00
lpy 071d52ad44
[RTduino][stm32f410-nucleo] 添加readme，在pins_arduino.c和pins_arduino.h添加了USER_KEY引脚编号 (#6838) 
* 添加readme
* 更改pins_arduino.h引脚编号
Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
 2023-01-10 21:41:58 -05:00
Meco Man 7ecba50ff6 format stm32 drivers 2023-01-08 22:52:13 -05:00
Meco Man 592284c66c format link scripts 2023-01-08 22:52:13 -05:00
Meco Man 9bc68d26a4 format Kconfig and sconscript 2023-01-08 22:52:13 -05:00
Man, Jianting (Meco) f4b285dc9c
improve sensor framework (#6784) 
* [stm32l475-pandora] rename sensor_port.c as drv_sensors.c
* [sensor][cmd] add enter critical section protection
* [sensor] add sensor reset command
 2023-01-08 21:33:38 -05:00
liYangYang 7c05d8517c
[STM32][SPI]解决挂载函数里面不同bsp对uaer_data的滥用 (#6819) 
* [spi]attach 片选引脚依赖pin框架
* 修改attach函数
 2023-01-07 23:03:42 -05:00
wdfk-prog 431579a166
[stm32][adc]更改配置通道与校准函数顺序 (#6758) 
* [stm32][adc]更改配置通道与校准函数顺序
* 添加16位与14位分辨率配置
* 添加内部参考电压与温度,电池电压通道配置

* [stm32][adc]修改返回参考电压函数
* 返回准确的参考电压值
* 通过该值在使用__HAL_ADC_CALC_DATA_TO_VOLTAGE宏计算的电压值更为准确

* 删除多余代码

* 规划代码格式

* 更新支持其余芯片
* 已测试F429
 2023-01-02 01:47:58 -05:00
螺丝松掉的人 c38c6e2c83
[rtduino]:add README for stm32f411-weact-blackpill pinout (#6807) 
* [rtduino]:add README for stm32f411-weact-blackpill pinout
 2023-01-01 23:39:40 -05:00
褚仕成 2b41f80f0e [rtduino]: fix README 2023-01-01 23:00:52 -05:00
goldengrandpa d355981041 [bsp][stm32f407-RoboMaster-C]Enable TIM5_CH1/2/3 2022-12-31 16:30:16 -05:00
褚仕成 de9db80814 [rtduino] : fix arduino_pinout and README 2022-12-30 07:51:49 -05:00
Meco Man 20a6f14e89 use PIN_IRQ_PIN_NONE to replace RT_PIN_NONE 2022-12-26 02:10:30 -05:00
Meco Man 40a24806f9 [stm32][pandora] add ap3216c sensor support 2022-12-26 02:10:30 -05:00
wdfk-prog fa7c1db768 [stm32][spic]修改SPI TX DMA中断优先级 
* 原先中断优先级不生效
 2022-12-24 15:12:30 -05:00
wdfk-prog db6ee55379 [STM32][common]更新rt_hw_us_delay函数,以支持设置更高延时 
* 未判断设置延时数是否会溢出
 2022-12-22 21:18:29 -05:00
Man, Jianting (Meco) 262392a69c
[sensor] draft new sensor-hal framework (#6746) 
* [sensor] new sensor framework
针对老版本sensor框架的诸多不合理设计进行重构
之前的PR中已经重构了浮点数相关的问题
本次PR主要围绕sensor的整体架构予以重构，对过于理想化的参数和模式予以删除
* [sensor] 增加can modbus总线类型
* [stm32l745] 完善sensor对接
* [sensor] fix the onchip ID print
 2022-12-21 21:24:51 -05:00
Zxy f4323f2049
[stm32f1] 对于RTC-Alarm进行添加STM32F1宏控制 (#6765) 
并确认并列出已经在什么情况或板卡上进行了测试。
And confirm in which case or board has been tested. -->
STM32F103ZET6

为什么提交这份PR (why to submit this PR)
使用STM32F103ZET6的RTC的Alarm功能出现问题，按照原本的驱动代码编译会报错。

你的解决方案是什么 (what is your solution)
修改底层驱动drv_rtc.c文件，将报错的几个结构体给注释掉即可。

在什么测试环境下测试通过 (what is the test environment)
rtstudio下对STM32F103ZET6进行测试并且成功运行Alarm功能
 2022-12-21 20:33:54 -05:00
螺丝松掉的人 eec9d4f595
[arduino][stm32f427-robomaster-a] : 对接RTduino (#6767) 
* [arduino][stm32f427-robomaster-a] : 对接RTduino

* Update README.md

* Update pins_arduino.c

Co-authored-by: Man, Jianting (Meco) <920369182@qq.com>
 2022-12-21 18:16:31 -05:00
Stanley Lwin f0ef8ada33
[bsp] [stm32F401] Enable PA11 for TIM1_CH4 (#6756) 2022-12-20 01:20:20 -05:00
螺丝松掉的人 ba2d7ba4c0
[arduino][stm32f407-robomaster-c] 对接RTduino (#6759) 2022-12-20 00:59:54 -05:00
wdfk-prog 0a6ffce446
[STM32][SPI]使用rt_hw_cpu_dcache_ops函数替换HAL库函数 (#6745) 
* [STM32][SPI]使用rt_hw_cpu_dcache_ops函数替换HAL库函数

* 规范代码格式
 2022-12-16 02:10:42 -05:00
wdfk-prog 63e7633246
[STM32][SPI]在H7芯片下修复时钟频率获取错误问题并添加DMA驱动 (#6741) 
* [STM32][SPI]在H7芯片下修复时钟频率获取错误问题并添加DMA驱动
* H7下SPI时钟不再为外设总线时钟频率
* H7下DMA驱动需要进行CacheLine对齐
 2022-12-15 01:05:56 -05:00
Man, Jianting (Meco) 99bdf978d7
[rtdef] use lower-case to define attributes (#6728) 
* [rtdef] rename RT_WEAK attribute as rt_weak

* [rtdef] rename RT_USED attribute as rt_used

* [rtdef] rename RT_SECTION attribute as rt_section

* [rtdef] rename ALIGN attribute as rt_align

* [legacy] add RT_USED ALIGN RT_SECTION RT_WEAK as legacy support
 2022-12-11 13:12:03 -05:00
liYony 190eda6ab0 [bug] fix tim bug 2022-12-09 23:19:18 -05:00
liYangYang e3a09b2791
[STM32][SPI]优化APBx时钟配置代码 (#6698) 
* [STM32][SPI]优化APBx时钟配置代码
 2022-12-06 12:52:37 -05:00
wdfk-prog db3e261bc4 添加判断当前使用定时器是否可配置为主从定时器模式 2022-12-06 00:07:57 -05:00
少年老王 12ec87d64e 修改串口V2的putc顺序 
1.顺序修改回V1,保证每次都是当前数据发送完才跳出
 2022-12-06 10:37:35 +08:00
liYony 575fe18ea0 some errors 2022-12-06 10:37:15 +08:00
liYony 7a49f8d920 tim_clock_get 2022-12-06 10:37:15 +08:00
liYony e9ddc36488 tim clk config fix 2022-12-06 10:36:59 +08:00
wdfk-prog aaf1abf25f [fix][stm32]修复输出高电平异常的问题 2022-12-05 20:49:28 -05:00
Meco Man dea34be06c [stm32l475-pandora] update readme 2022-12-05 20:44:34 -05:00
liYangYang 4bdca93a8d
[RTduino][STM32]为stm32l431-BearPi开发板对接RTduino软件包 (#6688) 2022-12-04 20:28:15 -05:00
guo ecf2d82159
sync branch rt-smart. (#6641) 
* Synchronize the code of the rt mart branch to the master branch.
  * TTY device
  * Add lwP code from rt-smart
  * Add vnode in DFS, but DFS will be re-write for rt-smart
  * There are three libcpu for rt-smart:
    * arm/cortex-a, arm/aarch64
    * riscv64

Co-authored-by: Rbb666 <zhangbingru@rt-thread.com>
Co-authored-by: zhkag <zhkag@foxmail.com>
 2022-12-03 12:07:44 +08:00
wdfk-prog 569e2ae1e8
[CAN]update struct can_filter_item and rt_can_msg (#6556) 
* 修改ry命令，已便于自定义保存路径

* modified:   components/utilities/ymodem/ry_sy.c

* 修复从被动错误恢复后发送返回异常

* 修复在自动重传模式下,ACK异常阻塞线程
- 删除TX中断函数else分支。仅当RQCP位 置一才进入该中断
- 添加SCE中断函数中关于ACK_ERR的else判断。自动重传模式下会进入该判断,打断自动重传释放完成量。

* 增加对于CAN1与CAN2的SCE中断和TX中断的公共处理函数

* formatting格式化代码

* update struct can_filter_item and rt_can_msg
1. 对过滤器号和索引号结构体定义中同一名称hdr进行重命名hdr_bank和hdr_index,
以便准确区分.采用宏定义兼容以前变量名.
2. 添加接收标识rxfifo,已指明是哪个RXFIFO.

* 更正42M下的波特率

* 修复接收获取索引号错误

* 添加接收标识

* 更新注释

* 取消CANFD限制

* update struct can_filter_item and rt_can_msg
 2022-11-21 21:45:51 -05:00
Meco Man 6808f48bdc [stm32] 解决Error_Handler()函数在*_msp.c文件下报错的问题 
在用户头文件区增加#include <drv_common.h>即可
 2022-11-21 21:31:33 -05:00
Meco Man dc5f280a9a [stm32l475-pandora] select AHT10_USING_SENSOR_DEVICE 2022-11-21 21:31:16 -05:00