beda0899f5
Merge pull request #3397 from luhuadong/develop
...
[Sensor] Support custom commands for rt_sensor_control
2020-03-16 21:28:30 +08:00
cc319ac1aa
Merge pull request #3458 from shawn1221/mmc-upstream-20200316
...
component: sdio: fix potential ricky clock setting
2020-03-16 21:20:09 +08:00
822d8f4002
Merge pull request #3456 from zhao0116/spi
...
spi: support slave mode and master mode runtime config
2020-03-16 15:34:33 +08:00
4c7106fa9d
component: sdio: fix potential ricky clock setting
...
Currently RTT mmc stack only support Highspeed mode or
blow, which means the max speed should be 52MHz according
to JEDEC spec. Two problems show here:
(1) max_data_rate = (unsigned int)-1. The value of unsigned int
depends on compilers/arch. Moreover, it makes no sense to assume
cpu addressing width with IP clock rate limit.
(1)hs_max_data_rate was set to 200MHz.
So what should BSP drivers do if 52MHz < max_data_rate < 200MHz?
Either it blindly sets a spec-violated clock rate to drive a Highspeed
card, or just adjust the clock rate internally. Both cases are
really bad for practice.
If the card claims to support Highspeed, we set the clock to not
to exceed 52MHz. Otherwise it should be set according to
card->max_data_rate parsed by ext_csd. This patch fixes it as-is,
and also simplify the code a lot.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
2020-03-16 14:45:41 +08:00
7c4e70b3b3
[Sensor] Add user-commands range limitation
2020-03-16 11:03:32 +08:00
1c68bd9d3c
Support msc mode automatic switching
...
Signed-off-by: Cliff Chen <cliff.chen@rock-chips.com>
2020-03-16 10:50:34 +08:00
d906bf5b18
spi: support slave mode and master mode runtime config
...
support slave mode and master mode runtime config.
Change-Id: Iabadbade8997bb8e3adef8ce95f6c45f6bb35329
Signed-off-by: Yifeng Zhao <yifeng.zhao@rock-chips.com>
2020-03-16 10:20:03 +08:00
11277014a3
[Components] sdio: try bus width depends on host's capability
...
It makes no sense to try bus width if not supported by drivers or BSP,
since we know it must be failed. It saves a lot for booting in time
critical environment.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
2020-03-12 09:00:41 +08:00
a33bc0f321
[component] sdio: Fix mmc mount function if the whole device is a partition
...
If the whole sd card was formatted as a partition, current
code break out the loop mistakenly, so it skips dfs_mount_device
later. Simply remove the broken 'break' to solve this problem.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
2020-03-12 09:00:33 +08:00
eb5467bece
Fixed wrong output information in core.c
...
rt_kprintf("alloc memery failed\n"); -> rt_kprintf("alloc memory failed\n");
2020-03-08 00:20:31 +08:00
b3d196392c
Merge pull request #3413 from luhuadong/patch1
...
[Sensor] Add vendor info and sensor types for cmd
2020-03-04 11:44:25 +08:00
986b64cbe0
[driver][wlan] add raw frame send interface and Management frame filter interface
...
Signed-off-by: chenyong <1521761801@qq.com>
2020-02-29 17:12:48 +08:00
e09c99fcfb
fix raspi3-64 sdio driver
2020-02-28 14:56:56 +08:00
ac6f133f86
[Sensor] fixed %% print
2020-02-26 17:31:26 +08:00
3994ebbfd4
[Sensor] Add vendor info and sensor types for cmd
2020-02-26 17:20:41 +08:00
a646b9275d
Update sd.c
...
clean #if 0 code
2020-02-23 09:20:09 +08:00
815d231f4a
add change log
2020-02-22 22:43:14 +08:00
82f981d34c
[Sensor] Support custom commands for rt_sensor_control
2020-02-22 21:00:35 +08:00
26fa5e5fa2
[Sensor] Add the prefix corresponding to sensor types
2020-02-20 16:09:52 +08:00
7c2d7c7eb7
[Sensor] ASAIR is the trademark of Aosong
2020-02-20 15:39:39 +08:00
c734a7b3fa
[Sensor] Dust and eCO2 data should be defined unsigned
2020-02-17 23:26:54 +08:00
da8e829fa8
[Sensor] Add some class and vendor information of sensor
2020-02-17 23:17:54 +08:00
dd5178efdf
Merge pull request #3352 from z14git/serial_bug_fix
...
修复因串口接收缓冲区满且没有开启ULOG_USING_ISR_LOG而造成的死机问题
2020-02-11 11:56:01 +08:00
50c2af5eea
[serial.c] 修复在没有开启ulog时，警告日志不会输出的问题
2020-01-21 16:38:07 +08:00
1499844699
修复因串口接收缓冲区满且没有开启ULOG_USING_ISR_LOG而造成的死机问题
2020-01-18 10:12:29 +08:00
0fdf20cf58
添加虚拟串口接收缓存的 ENV 配置项，可手动配置接收缓存大小，默认为128字节
2020-01-17 15:42:56 +08:00
b87f493f2b
🐛 fix compile warning, undefine var
2019-12-31 16:16:15 +08:00
3ad6b30e18
[componects] 修复不能发现禁止写spi flash失败的情形
...
`(register_status & SFUD_STATUS_REGISTER_WEL) == 1` 这个表达式始终为假
SFUD_STATUS_REGISTER_WEL = (1 << 1)
2019-12-27 16:52:52 +08:00
a4dba7b583
[Components][USB][ECM] fix build error
2019-12-25 13:15:10 +08:00
9111aca176
Merge pull request #3279 from armink/fix_rbb
...
[DeviceDriver][IPC] Fix rbb free bug in rt_rbb_destroy.
2019-12-19 14:59:29 +08:00
6228ff5e98
[DeviceDriver][IPC] Fix rbb free bug in rt_rbb_destroy.
2019-12-19 10:39:55 +08:00
7a00b42e97
Update pipe.c
2019-12-18 23:19:54 +08:00
055061a639
[DeviceDrivers] Fix pipe memory issue.
2019-12-18 21:38:05 +08:00
a87c2ef970
Merge pull request #3234 from fmkong/spi_flash_sfud
...
[drivers/spi_flash_sfud] accept the error from spi read or write in spi_write_read function.
2019-12-18 20:03:28 +08:00
7e9d54d87a
[drivers/spi_flash_sfud] accept the error from spi read or write in spi_write_read function.
2019-12-17 17:46:43 +08:00
15b10bd5e2
[components][sfud] update sfud options.
2019-12-03 16:45:46 +08:00
ab981a32b5
[Device/I2C] Chang debug message print way to ulog
2019-11-26 07:41:43 +08:00
55c3182b78
Merge pull request #3193 from wangk-ge/master
...
修改内存泄漏问题
2019-11-21 22:04:42 +08:00
54b72927d1
Merge pull request #3214 from chengxiaohu/master
...
添加 W25Q64DW SPI Flash 到支持列表
2019-11-21 22:04:19 +08:00
6b8a3469f8
Merge branch 'master' of https://github.com/chengxiaohu/rt-thread
2019-11-20 23:38:35 +08:00
2a512f3df0
添加 W25Q64DW SPI Flash 到支持列表。实际应用中发现该芯片不支持sfdp。
2019-11-20 23:33:10 +08:00
ec3b4349d3
Merge branch 'master' of https://github.com/RT-Thread/rt-thread into renhaibo-branch
2019-11-16 11:20:13 +08:00
aafed7b434
1.修复sd卡热插拔内存泄露的bug
...
2.dfs增加函数，配合实现sd卡热插拔自动挂载卸载文件系统
2019-11-16 11:16:48 +08:00
97b7661f6e
Merge pull request #3202 from armink/fix_rtc
...
[components] remove libc dependency in ulog and RTC driver.
2019-11-16 10:30:23 +08:00
d3ee03f9c6
[RNDIS]fix speed on HS
2019-11-15 15:05:21 +08:00
e59339e4b8
[components] remove libc dependency in ulog and RTC driver.
2019-11-14 18:09:55 +08:00
12eacb8df6
components: drivers: misc: pwm: Missing "pwm1" here.
2019-11-11 17:10:25 +08:00
649f75f861
修改内存泄漏问题
2019-11-11 16:46:43 +08:00
f82d4f1f6f
[DeviceDrivers] add warning about overflow by serial receiver
2019-11-01 10:38:07 +08:00
260a61d36a
[components/drivers][pm] fix data type problem
...
Signed-off-by: MurphyZhao <d2014zjt@163.com>
2019-09-23 18:02:46 +08:00
Bernard Xiong
Shawn Lin
luhuadong
Cliff Chen
Yifeng Zhao
David Lin
chenyong
bigmagic
A.orz
z14git
Ihavedone
shangjinlong
zhaoshaowei
ZYH
armink
Fanming
tangweikang
a1012112796
hichard
Steven Liu
wangk-ge
Ernest
MurphyZhao