Bernard Xiong
|
7fd434e2f7
|
Merge pull request #1935 from armink/add_pm
[DeviceDriver][pm] Update pm driver.
|
2018-10-29 19:44:20 +08:00 |
armink
|
f05baecc5a
|
[DeviceDriver][pm] Update pm driver.
|
2018-10-29 19:02:31 +08:00 |
Bernard Xiong
|
98fc1cb4cf
|
Merge pull request #1933 from armink/add_pm
[DeviceDriver] Add power management device driver.
|
2018-10-29 10:27:38 +08:00 |
armink
|
2d59fe0310
|
[DeviceDriver] Add power management device driver.
|
2018-10-29 09:54:52 +08:00 |
Peter Zhang
|
4f14dc9186
|
[components][drivers][usb_common]: Fix typo for 'ifndf' in usb_common.h
|
2018-10-26 14:33:21 +08:00 |
Peter Zhang
|
328a697c1d
|
[components][drivers][usb][usb_device][cdc_vcom]: Add 'RT_VCOM_TX_TIMEOUT' to configure TX_TIMEOUT whick may block vcom tx thread for a long time. Add 'RT_VCOM_TASK_STK_SIZE', 'RT_VCOM_TX_USE_DMA', 'RT_VCOM_SERNO', 'RT_VCOM_SER_LEN', 'RT_VCOM_TX_TIMEOUT' to Kconfig
|
2018-10-26 14:29:22 +08:00 |
zyh
|
d950ffc485
|
[Components][USB]修复拼写错误
|
2018-10-26 11:41:54 +08:00 |
Bernard Xiong
|
95fde46d18
|
Merge pull request #1923 from uestczyh222/usb
[Components][drivers][usb]修复非对齐访问异常
|
2018-10-26 07:08:24 +08:00 |
liruncong
|
d3764db892
|
解决以下问题:
1) usb驱动中时间未与RT_TICK_PER_SECOND关联问题,RT_TICK_PER_SECOND变化时,这些时间将发生变化
解决: 增加USB_TIMEOUT_BASIC/USB_TIMEOUT_LONG/USB_DEBOUNCE_TIME
2) 修正rt_usbh_detach_instance函数使用device->cfg_desc前未判断是否有效. 可导致abort
3) rt_usbh_hub_port_change增加device->port初始化,否则struct uhcd_ops相关函数无法直接得到端口号
|
2018-10-23 20:04:51 +08:00 |
zyh
|
c2539db38e
|
[Components][drivers][usb]修复非对齐访问异常
|
2018-10-22 12:08:43 +08:00 |
Bernard Xiong
|
1699a12b15
|
Merge pull request #1908 from enkiller/wlan-lwip
[components][wlan] 兼容lwip1.4
|
2018-10-18 21:35:06 +08:00 |
tangyuxin
|
a7956e5ec9
|
[components][wlan] 兼容lwip1.4
|
2018-10-18 14:24:15 +08:00 |
tangyuxin
|
1e0e221dd7
|
[components][wlan] 修复某些情况下模式初始化两遍的bug
|
2018-10-18 14:19:32 +08:00 |
Bernard Xiong
|
070248bb04
|
Update spi_flash_w25qxx.c
|
2018-10-15 09:23:58 +08:00 |
Bernard Xiong
|
e158d48de0
|
[license] Fix the bad license replace.
|
2018-10-15 00:50:04 +08:00 |
Bernard Xiong
|
2c0640a178
|
[license] Change license to Apache.
|
2018-10-14 19:37:18 +08:00 |
ZYH
|
e00364c5e4
|
[Components][SDIO]修复脏值调用
|
2018-10-12 11:22:05 +08:00 |
Bernard Xiong
|
65fc7421e0
|
Merge pull request #1871 from uestczyh222/master
[Components][USB]增加健壮性
|
2018-10-09 19:54:10 +08:00 |
Bernard Xiong
|
05101c4bba
|
Merge pull request #1789 from liruncong/dev-usb
修正drivers下一处bug,并修正armclang编译时该目录下的错误或警告
|
2018-10-09 13:49:52 +08:00 |
ZYH
|
2b7488ca85
|
[Components][USB]更新license
|
2018-10-09 11:43:35 +08:00 |
ZYH
|
f73e4c3fc4
|
[Compoments][USB]增加对class的非法注册的判断
|
2018-10-09 11:41:38 +08:00 |
ZYH
|
294223c80b
|
[Components][USB]修复当未开启复合设备时HID编译失败
|
2018-10-09 11:32:41 +08:00 |
Bernard Xiong
|
0cd2c10627
|
Merge pull request #1833 from uestczyh222/sdio
Fix some bugs for sdio
|
2018-09-30 12:01:06 +08:00 |
ZYH
|
2e74539130
|
[Components][SDIO]fix 'rocr' declared without an initial value
|
2018-09-30 11:01:06 +08:00 |
weety
|
84ffe47bb5
|
Fixed Kconfig spelling mistake.
|
2018-09-29 22:54:28 +08:00 |
guozhanxin
|
12b7634c62
|
[components][drivers][pwm] Add rt_pwm_disable function and API Interface
|
2018-09-26 17:29:39 +08:00 |
ZYH
|
780f538525
|
[Components][SDIO][MMC] fix null point check
|
2018-09-22 15:02:48 +08:00 |
ZYH
|
3d69c44ab8
|
[Components][SDIO]fix Null point access
|
2018-09-22 14:56:55 +08:00 |
ZYH
|
f6be7abb2d
|
[Components][SDIO]block 'err' declared without an initial value
|
2018-09-22 14:53:08 +08:00 |
ZYH
|
f260f7effd
|
[Components][SDIO]fix Assigned value is garbage or undefined
|
2018-09-22 14:49:47 +08:00 |
Bernard Xiong
|
b5202d17fb
|
Merge branch 'master' into dev
|
2018-09-21 17:09:46 +08:00 |
Bernard Xiong
|
a13565ce26
|
Merge pull request #1825 from heyuanjie87/mtd-kenghuo-cla
添加新的mtd接口
|
2018-09-20 18:16:21 +08:00 |
heyuanjie87
|
b620c10014
|
更改许可
|
2018-09-20 09:41:05 +08:00 |
tangyuxin
|
f7423741f2
|
[DeviceDriver][wlan] 已知问题修复
1.Kconfig添加DEBUG选项
2.函数入参检查
3.修复拼写错误及逻辑错误
4.低功耗可以设定等级
5.移除残留中文注释
|
2018-09-19 15:06:24 +08:00 |
heyuanjie87
|
3e71dc88f3
|
更改许可信息
|
2018-09-19 10:09:38 +08:00 |
heyuanjie87
|
bc5a5f89e9
|
添加新的mtd接口
|
2018-09-18 18:41:33 +08:00 |
ZYH
|
9a666099aa
|
[Components][Drivers][hwtimer]fix 'index' declared without an initial value
|
2018-09-18 15:30:52 +08:00 |
ZYH
|
cc8ab15472
|
[Components][Drivers][SPI]fix "Value stored to 'result' is never read"
|
2018-09-17 10:06:54 +08:00 |
tangyuxin
|
324bfc5897
|
[DeviceDriver][wlan] add new wlan framework
|
2018-09-15 10:16:04 +08:00 |
armink
|
dff8a2c513
|
[DeviceDriver] Add rbb (ring block buffer) data structure.
|
2018-09-12 08:59:58 +08:00 |
Bernard Xiong
|
8c2448a4d4
|
Merge pull request #1774 from EvalZero/sdio_dev
[DeviceDriver][SDIO] Update sdio debug log.
|
2018-09-11 19:03:10 +08:00 |
liruncong
|
7b788014f7
|
修正drivers下,armclang编译时的警告或错误 注:vcom_tx_thread_entry下, if(!res & CDC_TX_HAS_DATE)应为bug.
|
2018-09-10 19:40:08 +08:00 |
weety
|
799c5e4ea2
|
[sdio] Fixed merge error.
|
2018-09-09 22:07:06 +08:00 |
weety
|
e19cfd4571
|
[sdio] Fixed issue for requset size calculation.
|
2018-09-09 21:20:08 +08:00 |
weety
|
02a2b78943
|
[sdio] Fixed error for dma size calculation.
|
2018-09-09 14:05:45 +08:00 |
weety
|
618e185cd3
|
[sdio] Limit the data size per request based on the sdio controller driver configuration parameters.
|
2018-09-08 23:21:13 +08:00 |
EvalZero
|
2c01189114
|
[DeviceDriver][SDIO] Update sdio debug log.
|
2018-09-05 14:50:43 +08:00 |
liruncong
|
d3c08afd75
|
1. 保留目前未用到的rt_usbd_ep_unassign函数,暂时移除static属性,消除警告.
2. 修改一处存在多余括号问题. armclang有警告发出.
|
2018-09-02 22:39:51 +08:00 |
liruncong
|
923d6fe33d
|
消除usb结构体gcc编译时的相关警告
|
2018-08-28 03:18:39 +08:00 |
armink
|
9ef9e4b0f8
|
[DeviceDriver][SFUD] Update sfud to v1.0.6 latest version.
|
2018-08-22 16:48:17 +08:00 |
armink
|
bc7a43bdaf
|
[DeviceDriver][SFUD] Replace the vsnprintf to rt_vsnprintf.
|
2018-08-22 16:41:56 +08:00 |
MurphyZhao
|
651149fcbb
|
[components/drivers/spi] 增加 sfud flash 设备查找接口
Signed-off-by: MurphyZhao <d2014zjt@163.com>
|
2018-08-16 14:48:46 +08:00 |
neverxie
|
3a83e5524f
|
[components][pipe] Fix 'pipe' command close bug when open failed.
|
2018-08-11 18:45:18 +08:00 |
Bernard Xiong
|
e6fedb6e9b
|
[DeviceDrivers] Remove warning in Kconfig
|
2018-07-28 20:22:47 +08:00 |
Bernard Xiong
|
cd5ccea44c
|
Merge pull request #1652 from enkiller/dev
[components][drivers][sdio]修复没有注册SDIO中断导致断言的问题
|
2018-07-22 11:19:32 +08:00 |
tangyuxin
|
78189dfb6b
|
[components][drivers][sdio]修复没有注册SDIO中断导致断言的问题
|
2018-07-21 16:29:17 +08:00 |
liang yongxiang
|
2f402db661
|
[device][serial] call rx_indicate function only if the rx_length is not equal 0
|
2018-07-21 12:34:27 +08:00 |
liang yongxiang
|
bd044f674d
|
[components] format Kconfig
|
2018-07-18 11:59:50 +08:00 |
Bluebear233
|
dc0aa39b42
|
[DeviceDriver][serial] 修复get_index越界问题
|
2018-07-16 09:47:36 +08:00 |
armink
|
e1c612bf0a
|
[DeviceDriver][sfud] Fix block erase 0 byte issue when start address is equal end address.
|
2018-07-14 21:01:38 +08:00 |
armink
|
6cd8658dad
|
[rtdbg] Change all DBG_SECTION_NAME to new format.
|
2018-07-11 10:23:19 +08:00 |
zyh
|
b3eaf17e19
|
[Components][pipe]暴露 rt_pipe_delete 接口
|
2018-07-10 14:54:39 +08:00 |
zyh
|
151330b721
|
[Components][USB][Device]Support customer HID class|支持自定义HID设备
|
2018-07-04 14:13:09 +08:00 |
Bluebear233
|
985db0e3bf
|
[KCONFIG]添加pipe缓冲区大小配置
|
2018-06-30 10:36:31 +08:00 |
MurphyZhao
|
6a85a624d7
|
[drivers/wlan] Fix the problem that the password is empty
Signed-off-by: MurphyZhao <d2014zjt@163.com>
|
2018-06-29 14:57:13 +08:00 |
Bernard Xiong
|
f0f883668c
|
Merge pull request #1579 from RT-Thread/fix_waitqueue
Fix waitqueue issue
|
2018-06-29 13:19:16 +08:00 |
luo jiao
|
ef8398c2bb
|
[components][drivers][pin module]:typo fix for pin_detach_irq
|
2018-06-26 22:18:58 +08:00 |
Bernard Xiong
|
464e1615b9
|
Merge pull request #1572 from enkiller/mmc
[components][drivers]sdio 给局部指针变量赋初值,修复潜在问题
|
2018-06-26 12:10:05 +08:00 |
Bernard Xiong
|
0cac9afc4b
|
[Kernel] clean code for indentation.
|
2018-06-26 12:02:03 +08:00 |
Bernard Xiong
|
ef132f3c94
|
[Kernel] clean code for indentation.
|
2018-06-26 11:57:20 +08:00 |
Bernard Xiong
|
a1a56ce1d1
|
[Kernel] Add flag in wait queue and fix wakeup issue.
|
2018-06-26 11:19:38 +08:00 |
tangyuxin
|
f850a2dd33
|
[components][drivers]sdio 给局部指针变量赋初值,修复潜在问题
|
2018-06-26 11:09:13 +08:00 |
tangyuxin
|
050600f4a8
|
[components][drivers]enc28j60 1.默认关闭log打印 2.优化一个未使用的变量
|
2018-06-26 11:00:52 +08:00 |
Bernard Xiong
|
fb36988e86
|
Merge pull request #1562 from TanekLiang/mmcsd_fix_warning
[DeviceDrivers] remove unused-assign code
|
2018-06-23 19:44:36 +08:00 |
aozima
|
7da376280a
|
Merge pull request #1556 from enkiller/dev
[components][drivers]wlan打印ap信息更加友好
|
2018-06-23 19:20:59 +08:00 |
tangyuxin
|
7f4b8d2102
|
[components][drivers]wlan 1.修改wifi速率单位为bps 2.打印ap信息更加友好
|
2018-06-23 14:52:08 +08:00 |
liang yongxiang
|
fef854a431
|
[DeviceDrivers] remove unused-assign code
|
2018-06-23 12:09:24 +08:00 |
tangyuxin
|
43531cc276
|
[components][drivers]Kconfig添加SDIO相关配置
|
2018-06-23 11:24:31 +08:00 |
Bluebear233
|
284744b7b2
|
Update serial.c
rx_fifo->is_full已经满时继续更新rx_fifo->get_index
|
2018-06-13 21:45:03 +08:00 |
armink
|
570ae751be
|
[components][drivers] Add irq lock to rt_wqueue_wait.
|
2018-06-12 17:10:20 +08:00 |
Bernard Xiong
|
b110d77d8f
|
Merge pull request #1521 from RT-Thread/feature_v310
Feature v310
|
2018-06-11 11:13:59 +08:00 |
Bernard Xiong
|
43e3eed3b9
|
Merge pull request #1517 from armink/fix_sfud
[components][sfud] Fix RT_DEBUG_SFUD macro to bool type.
|
2018-06-11 10:40:11 +08:00 |
armink
|
3b98684664
|
[components][sfud] Fix RT_DEBUG_SFUD macro to bool type.
|
2018-06-10 18:27:52 +08:00 |
Bernard Xiong
|
564df04da1
|
Merge branch 'master' of https://github.com/RT-Thread/rt-thread
|
2018-06-10 18:01:15 +08:00 |
Bernard Xiong
|
884fb70fe9
|
[Kernel] Add device ops feature.
|
2018-06-10 17:59:17 +08:00 |
Bernard Xiong
|
e1a57f053a
|
Merge pull request #1513 from armink/fix_sfud
[components][sfud] Update log info.
|
2018-06-10 15:55:13 +08:00 |
armink
|
24f633e025
|
[components][sfud] Update log info.
|
2018-06-10 11:08:01 +08:00 |
aozima
|
5569d17b95
|
[DeviceDrivers] rename _pwm.c to rt_drv_pwm.c
|
2018-06-08 16:07:12 +08:00 |
aozima
|
0e5b4a0ff2
|
[DeviceDrivers] export pwm_enable/set to shell.
|
2018-06-08 16:04:29 +08:00 |
aozima
|
cdfef48395
|
[DeviceDrivers] add pwm driver framework.
|
2018-06-07 21:23:22 +08:00 |
tangyuxin
|
c67595c242
|
[components][drivers]Kconfig wifi默认打开sta模式
|
2018-06-06 11:07:50 +08:00 |
tangyuxin
|
2f35ed0ec7
|
[components][drivers]Kconfig更新
|
2018-06-06 11:03:09 +08:00 |
tangyuxin
|
6f12736c86
|
[components][drivers]wlan驱动框架更新
|
2018-06-05 16:52:56 +08:00 |
guozhanxin
|
e2c89ec0f5
|
[components][cputime]to be able trace before use DWT.|使用 DWT 之前必须先使能跟踪系统.
|
2018-06-04 14:54:07 +08:00 |
tangyuxin
|
85b14687f4
|
[components][drivers]Kconfig 添加Audio选项
|
2018-05-29 10:10:42 +08:00 |
MurphyZhao
|
af54e33d6f
|
[components/drivers/wlan] remove duplicate configuration in wlan_cmd.c, this configuration is included in the dhcp_server.c
Signed-off-by: MurphyZhao <d2014zjt@163.com>
|
2018-05-28 17:59:07 +08:00 |
zyh
|
178fce54bd
|
[Components][USB]fix device ep write 1bytes on hs
|
2018-05-28 11:04:49 +08:00 |
armink
|
a6b6b05d7d
|
[drivers/rtc] Update NTP update time API.
|
2018-05-10 18:29:56 +08:00 |
armink
|
5501ec36cb
|
[components/libc] Move time() and clock() function to libc time.c.
|
2018-05-07 18:19:15 +08:00 |
aozima
|
088990f7d3
|
update enc28j60 driver: ensure enable PHY link changed interrupt.
|
2018-05-05 13:26:18 +08:00 |