Commit Graph

4584 Commits

Author SHA1 Message Date
wdfk-prog ca4645000a [components][fal]Log warning for block partition exceeding flash length 2024-07-14 22:51:08 +08:00
zms123456 4e8b8290ab
[driver][virtio]fix virtio net rx error (#9170)
fix virtio net rx error
2024-07-13 22:16:03 +08:00
sakumisu 4122f6d8b8 fix(cherryusb): fix typo 2024-07-12 20:31:31 +08:00
wdfk-prog 6e7cf3a608 [components][SPI][spi-bit-ops]修复可能的异常操作
* 移除初始化时未进行引脚初始化就进行引脚设置可能导致的异常
* CS引脚配置判断完善
* xfer返回值优化
2024-07-12 17:48:17 +08:00
Shell beee77f372
feat: support ARCH_REMAP_KERNEL on libcpu/c906 (#9123)
feat: [libcpu/c906] support ARCH_REMAP_KERNEL

This change was necessary to enable the remapping of the kernel image to
a high virtual address region on the c906 platform.

Changes:
- Introduced new configuration options `ARCH_REMAP_KERNEL`, and
  `ARCH_USING_ASID` under the `ARCH_RISCV64` section.
- Updated MMU initialization and switching functions to incorporate
  remapping handling.
- Modified page table setup for proper memory attribute settings.
- Added support for early memory setup, kernel remapping
- Added conditional compilation for ASID support in the `rt_aspace` struct,
  since this is not enable currently for most architecture.

Signed-off-by: Shell <smokewood@qq.com>
2024-07-11 11:00:04 +08:00
wdfk-prog 15a8ebe0a0
[components][driver][can]Fix possible memory overflow caused by RX
修复RX可能导致的内存溢出情况

#8634
2024-07-09 20:22:37 +08:00
Shell 3f6960b7f5
[smart/tty] skip configure of rt_serial on tty open (#9152)
Skip configure on open since all configs are copied from the current
configuration on device. So we don't bother to set it back to device
again.

Changes:

- test and skip configuration on open() of tty device

Signed-off-by: Shell <smokewood@qq.com>
2024-07-09 13:28:24 +08:00
LaterComer 4d0b048c97
[fixed]serial_v2.c兼容DFS_V2接口 (#9153) 2024-07-09 12:10:08 +08:00
Evlers 755cde372c fix a bug that read members in non-existent functions 2024-07-05 10:51:17 +08:00
Evlers 7d7993f940 fix an issue where repeated remove of card resulted in assertions 2024-07-05 10:51:17 +08:00
zhao maosheng 95aa97714b fix initrd scan err 2024-07-04 00:34:01 +08:00
sakumisu cc853de5f3
Update cherryusb to v1.3.1 (#9122)
* fix(hpmicro): remove duplicate usb variable

* update(cherryusb): update to v1.3.1
2024-06-30 08:01:51 +08:00
Shell 90917cc75a
[format] cleanup libcpu/aarch64 (#8950)
* [dfs] fixup compiler warning

Signed-off-by: Shell <smokewood@qq.com>

* [format] libcpu/arm64: separate context switching codes

Signed-off-by: Shell <smokewood@qq.com>

* [format] libcpu/arm64: separate vector

Signed-off-by: Shell <smokewood@qq.com>

* [format] libcpu/arm64: separate context_gcc.S

Signed-off-by: Shell <smokewood@qq.com>

* [format] libcpu/arm64: moving headers to include directory

Signed-off-by: Shell <smokewood@qq.com>

* style: replace tab with space

---------

Signed-off-by: Shell <smokewood@qq.com>
2024-06-28 00:23:09 +08:00
Shell 3d8c27bcc9
[ktime] quality: remove recursion on hrtimer (#9110)
[ktime] feat: remove recursion on hrtimer

Replace recursive algorithm with a loop in hrtimer
when determining next timeout event and setup hr timer.

Signed-off-by: Shell <smokewood@qq.com>
2024-06-28 00:22:06 +08:00
wdfk-prog 28c7522e26 [drivers][serial V1]poll tx 增加异常退出机制 2024-06-27 00:11:18 +08:00
Rui 3b1d4e9222
fix Compilation error in "driver.c", "completion_up.c", "syslog.c" and "dlmodule.c". (#9093) 2024-06-26 23:25:23 +08:00
yiyi bc3afab2c9
[bsp][stm32]Optimize ADCs and fix some bugs 2024-06-26 20:26:52 +08:00
zms123456 b785ef9ed7
[libcpu][aarch64]memory setup using memblock (#9092)
* memory setup using memblock

* map pages later
2024-06-26 14:36:49 +08:00
heyuanjie87 a5a89c439f
[rv]修正signal退出后用户态sp少8的问题 (#9080) 2024-06-24 21:36:32 +08:00
wdfk-prog 5b64870507 [components][msh]msh命令失败添加打印日志 2024-06-24 10:56:48 +08:00
wdfk-prog f61c7085f7 [components][ringbuffer]修复编译错误 2024-06-24 10:55:16 +08:00
zms123456 22b5e5fd7b
[components][ktime]support period ktime timeout and multiple ktimer_hrtimer (#8972)
* support period time

* enable multiple ktimer

* mv set delay_cnt to hrtimer_start

* add ktime debug info

* change current_irq_begin to local var

* fix bug: setting current timer and setting timeout in driver aren't atomicly

* create->init

* refactoring ktime
2024-06-23 22:08:54 +08:00
Shell 5c1e5d2fca
[finsh] add msh command to bind thread to specific core (#9085)
[finsh] add msh command bind

Signed-off-by: Shell <smokewood@qq.com>
2024-06-23 22:02:56 +08:00
Shell fa2d80679e
[smart] add mprotect config (#9082)
Signed-off-by: Shell <smokewood@qq.com>
2024-06-22 13:30:55 +08:00
heyuanjie87 06ad67d549
[rv]信号处理进入用户态前恢复gp (#9072)
* [rv/virt/stackframe.h]添加GP寄存器保存偏移量宏

* 【rv/c906/stackframe.h]定义GP寄存器存储偏移量

* [rv]信号处理切换到用户态前恢复gp
2024-06-21 09:09:41 +08:00
latercomer d58c29d23e 除了bsp之外的Kconfig使用rsource替代source 2024-06-20 14:40:42 +08:00
zms123456 59193dfeeb
[timer]add all soft timer config (#9048)
* add all soft timer

* update wq

* add timer test

* shield LOG_D
2024-06-20 04:20:38 +08:00
zms123456 3b1ce1e4b6
[components][drivers]legacy fdt (#9062)
* legacy fdt

* update fdt
2024-06-19 19:48:35 +08:00
yiyi 7250301d3e
[components][net] sal_sock = sal_get_socket((int)file->data); ==> sal_sock = sal_get_socket((int)file->vnode->data); (#9065)
* [components][drivers] added sensor device lookup function

* [components][drivers] modified the format

* [components][drivers] modified 'sensor.c' file format

* Update af_inet_at.c
2024-06-18 11:16:10 +08:00
Shell 65c9947225
[libcpu] rv64: support for ARCH_REMAP_KERNEL (#9067)
* [libcpu] support for ARCH_REMAP_KERNEL

These changes introduce support for the ARCH_REMAP_KERNEL configuration,
which isolates kernel space in high virtual address regions. This feature
is necessary to enhance memory protection and management by segregating
user and kernel spaces more effectively.

Changes:
- Updated conditional macros to check for ARCH_REMAP_KERNEL instead of
  ARCH_KERNEL_IN_HIGH_VA in board initialization files to reflect the new
  configuration option.
- Modified qemu-virt64-riscv Kconfig and SConstruct files to include and
  utilize ARCH_REMAP_KERNEL.
- Created a new linker script `link_smart.lds` for smart linking in qemu-virt64-riscv.
- Updated rtconfig.py to use a more flexible execution path setup.
- Enhanced user address space definitions in `lwp_arch.h` to support the
  new virtual address mappings.
- Adjusted kernel memory initialization and mapping logic in `c906/mmu.c`
  and `virt64/mmu.c` to account for high virtual address regions.
- Added Kconfig option to enable ARCH_REMAP_KERNEL for RISCV64 architectures.
- Enhanced memory setup functions to support new mapping scheme, including
  updates to early page table setup and address relocation logic.

These modifications ensure that the system can utilize high memory
addresses for the kernel, improving memory isolation and system stability.

Signed-off-by: Shell <smokewood@qq.com>

* fixup: CI run failed

* bsp: default config without using smart

* fixup: static checks

* restore rt_hw_mmu_kernel_map_init for D1

---------

Signed-off-by: Shell <smokewood@qq.com>
2024-06-18 11:15:59 +08:00
zhujiale 73727fa06e add cromfs start with bootargs cmd 2024-06-18 10:54:32 +08:00
sp-cai f1832fea24
[components] [drivers ] [Kconfig] 整理 components/drivers 的 Kconfig (#9054)
整理 components/drivers 的 Kconfig
2024-06-16 15:43:27 +08:00
zhangyan 842b555358
[bsp/phytium]c++支持,gpio,qspi驱动修改 (#9059)
* GPIO驱动与QSPI驱动适配

* C++支持

* update

---------

Co-authored-by: 张衍 <zhangyan1491@phytium.com.cn>
2024-06-16 15:42:37 +08:00
zhuzhuzhu 2866da37a0
[fix] 修复ART-PI smart在sd/emmc读取不到分区的问题 (#9058)
Update sd.c
2024-06-13 17:06:46 +08:00
zhuzhuzhu 1869c543a6
[fix]fix tmpfs bug (#8970)
* first

* second

* thrid

* Update SConscript

* tmpfs testcase default n

* Update dfs_tmpfs.c

* format document

---------

Co-authored-by: zhujiale <zhujiale@rt-thread.com>
2024-06-13 08:54:02 +08:00
wdfk-prog 40e64e5be6
[workqueue] add comment (#9046) 2024-06-12 19:50:37 +08:00
Shell 540370e4de
[utest] remove delay for on thread testing (#9053)
* [utest] remove delay for on thread testing

The delay is introduced from 0dc7b9a5a2.

Though this is unnecessary for on sync utest.
So this is removed by a new entry and delay for asynchronous utest only.

Signed-off-by: Shell <smokewood@qq.com>

* fixup: msh cmd prototype

---------

Signed-off-by: Shell <smokewood@qq.com>
2024-06-12 19:48:51 +08:00
zhuzhuzhu 1b4b338ed1
【修复】修复ART-PI samrt上读取不到emmc/sd分区问题 (#9051)
Update sd.c
2024-06-12 18:14:48 +08:00
Shell f00db6381a
[mm] precise & readable mm fault type (#9047)
* [smart] fixup: precise mm fault type

Also, fixup arm64 read access fault

* arm64: using meaningful macro on trap

* fixup: renaming macro
2024-06-07 21:34:03 +08:00
yangpeng 479fab7775 [ipc]修复pipe创建失败时的资源异常释放 2024-06-06 09:42:16 +08:00
Chen Wang f0af6ef809
component:mm: improve sconscript (#9028)
There is no next-level directory under the components/mm/
directory. Do not need to enter the next-level directory
to process the SConscript file.

Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
2024-06-05 10:04:32 +08:00
Shell 6ca327d8ce
[smart] add CPU/thread usage tracing config (#8947)
* [smart] add CPU usage tracing config

This patch introduces following features:

- Added CPU usage tracing functionality, enabled by default, for
  applications like 'top'
- update time as smart independent

Signed-off-by: Shell <smokewood@qq.com>

* fixup: add ump idle thread

---------

Signed-off-by: Shell <smokewood@qq.com>
2024-06-04 00:06:41 +08:00
sp-cai 884e391954 [fix][misc][adc] 修复 ADC 电压转换的计算错误 2024-06-03 11:31:30 +08:00
sakumisu 62d321caa0
refactor(drivers/usb):replace rtt usb stack with cherryusb (#8799) 2024-06-02 11:20:13 +08:00
GUI 1d614a819d
[DM/feature] Implement PIC irq state { get; set } (#9006)
* [DM/feature] Implement PIC irq state { get; set }

There are some common state for irq:
1. Pending: IRQ was triggered, but software not ACK.
2. Active: IRQ was ACK, but not EOI.
3. Masked: IRQ was masked or umasked.

Signed-off-by: GuEe-GUI <2991707448@qq.com>

* [DM/pic] Support IRQ state { get; set } for ARM GICv2/v3

Signed-off-by: GuEe-GUI <2991707448@qq.com>

---------

Signed-off-by: GuEe-GUI <2991707448@qq.com>
2024-05-31 17:37:39 +08:00
zms123456 ef184d2157
[fix]fix compile err in pic-gic (#9015)
fix compile err in pic-gic
2024-05-31 17:33:34 +08:00
Shell e5cf86267b
[smart] fixup of script execution (#9009)
This patch fixup the script execution capabilities on argv passing
and adds support for arguments larger than 4k.

According to POSIX, the script parameter is quiet different
from the current implementation. Especially on the way it inserts
the path of executables. At the end, when you execute a script
from `$PATH`, it always fails.

For the script, interpreter will be invoked with the following
arguments: `{interpreter [optional-arg] pathname arg...}`
where pathname is the pathname of the file specified as the first
argument of execve(), and arg...  is the series of words pointed
to by the argv argument of execve(), starting at argv[1].  Note that
there is no way to get the argv[0] that was passed to the
execve() call.

The changes include:

- Separating argument, environment variable, and auxiliary vector
  processing into a new lwp_args.c file.
- Fixing bugs in script argument processing and supporting arguments
  larger than 4k.
- Updating lwp_execve to use the new argscopy function and removing
  the old lwp_argscopy function.
- Making various modifications to lwp_load and elf_aux_fill to work
  with the new argument processing.
- Removing unnecessary code related to dynamic loading and interpreter
  scripts.

Signed-off-by: Shell <smokewood@qq.com>
2024-05-31 17:32:19 +08:00
rcitachi 85b428df42
[lwp]list_process can print tid (#8991)
* list_process can print tid

* fix-ci

* update list_process

* Update lwp_pid.c
2024-05-31 17:30:46 +08:00
Shell e0df85c819
dev: random should copy size bytes of data to buffer (#9012) 2024-05-30 20:09:02 +08:00
GUI e7cddf3a52
[Feature] Support simple power domain API (#9005)
* [Feature] Power domain for device

1.Support device power on/off.
2.Support attach/detach device.
3.Support power domain driver api.

Signed-off-by: GuEe-GUI <2991707448@qq.com>

* [DM/platform] Enhanced platform bus

1.Add power domain for device.
2.Support `remove` and `shutdown` bus interface.

Signed-off-by: GuEe-GUI <2991707448@qq.com>

---------

Signed-off-by: GuEe-GUI <2991707448@qq.com>
2024-05-30 15:30:40 +08:00