1a010ef141
[bsp/gd32]Optimize GD32 bsp architecture ( #6108 )
...
* [bsp/gd32]Optimize GD32 bsp architecture
2022-06-28 19:43:00 +08:00
2a8e92b8ee
[docs] bsp/qemu_vexpress_a9 update README.md ( #6109 )
...
* [docs] bsp/qemu_vexpress_a9 update README.md
2022-06-27 11:38:55 +08:00
9f4b7b3858
[arduino][stm32l475] support wireless module pinout
2022-06-23 21:28:27 +08:00
8f09245ed5
Implement api docking of rt_pin_get. ( #6102 )
...
* Implement api docking of rt_pin_get.
2022-06-23 21:26:55 +08:00
2c10d5ad01
[rtc] use gmtime_r to replace gmtime ( #6012 )
...
* [rtc] use gmtime_r to replace gmtime
2022-06-22 13:41:06 +08:00
7416f62c06
update rt1170n menuconfig ( #6085 )
...
* updata rt1170 menuconfig
2022-06-22 09:33:14 +08:00
626da096d3
delet old HC32F460 bsp and modify README.md ( #6100 )
2022-06-22 09:32:21 +08:00
956fdc60c0
接收错误中断未触发的问题
...
/* Enable error interrupt */
NVIC_EnableIRQ(uart->config->rxerr_irq.irq_config.irq_num);
上述代码使能错误接收中断后需要使能串口的接收中断`USART_INT_RX`才可以正常触发中断
2022-06-21 14:16:17 +08:00
5774dcac8f
[bsp/qemu-virt64-aarch64] Fixup VirtIO queue align size ( #6096 )
2022-06-21 13:52:02 +08:00
f41cb5636f
修复hc32f460的can总线在bus off状态时死机问题，修复can滤波器设置失效问题 ( #6083 )
...
* [bsp][hc32]fix can bus driver bug.
1. 更改硬件滤波器数量为8，和手册描述一致。
2. 修复_can_control()函数，RT_CAN_CMD_SET_FILTER指令，当应用层ID超出29bit时导致滤波器失效的问题。
3. 修改_can_control()函数，RT_CAN_CMD_SET_FILTER指令，
可同时支持标准帧和扩展帧。
4. 修复can总线故障关闭时，程序一直卡在中断中无法退出的问题。
5. 针对can收发器硬件STB引脚，增加宏定义CAN1_STB_FUNC_ENABLE，适配没有STB引脚的收发器。
This reverts commit 7fcd8e9afc68eecf5fecc4cb6f9acc4fe76c2796.
2022-06-21 11:12:35 +08:00
8fa16f968a
[bsp/qemu-virt64-aarch64] Add more VirtIO drivers ( #6091 )
2022-06-18 08:09:57 +08:00
70bd55fea5
[arduino] use perf_counter to instead of hwtimer ( #6089 )
...
移除硬件定时器依赖
取消stm32f401 spi的支持
更换f401 arduino默认例程
2022-06-17 14:29:44 +08:00
1c81a6d220
修复sdio读写块的地址偏移问题 ( #6082 )
...
* 修复sdio读写块的地址偏移问题
2022-06-16 18:31:07 +08:00
3323366694
[bsp][hc32]support MDK AC6 compiler ( #6087 )
2022-06-16 14:18:55 +08:00
a50018c57e
[stm32][soft spi] implement soft spi ( #6078 )
...
* [stm32][soft spi] implement soft spi
2022-06-16 10:54:30 +08:00
ada0e8f1a1
[simulator] improve init process
2022-06-16 10:30:16 +08:00
9d0f088e20
添加HC32F460系列RTC外设驱动 ( #6069 )
...
* 添加HC32F460系列RTC外设驱动
2022-06-15 10:38:35 +08:00
c8d92d7529
fix bugs of hc32 driver adc and can ( #6077 )
...
* fix bugs of hc32 driver adc and can
2022-06-15 10:37:27 +08:00
14cd8d0145
[bsp][stm32]：修复UART6 DMA分配有可能冲突的BUG
...
用户自己可以添加DMA分配文件，所以这里的DMA分配有可能和用户自定义的冲突
2022-06-14 17:00:11 +08:00
b0030704d0
[stm32][hwtimer] add H7 support
2022-06-14 16:11:05 +08:00
3d06d96f65
[bsp][stm32][drv_adc.c]: change the bsp name of 100ask to be consistent with other bsp and commit a bug for drv_adc,c ( #6068 )
...
* [bsp][stm32][drv_adc.c]: change the bsp name of 100ask to be consistent with other bsp and commit a bug for drv_adc,c (#6068 )
2022-06-14 14:17:22 +08:00
53ed031498
[bsp/qemu-virt64-riscv]: dont use sbi in m-mode
2022-06-13 21:26:49 +08:00
2006785394
[bsp/nuvoton] Upload missing files. ( #6052 )
...
* [bsp/nuvoton] Upload missing files.
Co-authored-by: Wayne Lin <wclin@nuvoton.com>
2022-06-13 21:16:55 +08:00
c16eaf55de
[bsp/stm32l496_ali] add the on-chip flash ( #6061 )
...
* [bsp/stm32l496_ali] add the on-chip flash
* [bsp/stm32l496_ali]add Kconfig
Co-authored-by: Meco Man <920369182@qq.com>
2022-06-13 21:15:12 +08:00
5ccf6a0fa8
添加HC32F460系列ADC外设驱动支持 ( #6067 )
...
* 添加HC32F460系列ADC外设驱动支持
2022-06-13 21:13:51 +08:00
fabd8cf03e
修改格式
2022-06-13 11:33:48 +08:00
65669de0e3
[bsp][hc32]添加HC32F460系列模拟I2C外设驱动支持
2022-06-13 11:33:48 +08:00
7824c54b1b
[docs] add nrfx docs
2022-06-09 14:35:20 +08:00
138925be08
修复多串口的描述符被覆盖的问题 ( #6051 )
...
[bsp][HC32] 修复使用多串口的描述符被覆盖的问题
2022-06-09 14:32:37 +08:00
5e0810e756
[bsp][stm32l496zg] add on-chip feature ( #6056 )
...
* [bsp][stm32l496zg] add on-chip feature
2022-06-09 14:28:36 +08:00
8b60b58b51
[bsp][rockchip][rk2108]: add rk2108 base support. ( #6040 )
...
* [bsp][rockchip][rk2108]: add rk2108 base support.
Signed-off-by: Steven Liu <steven.liu@rock-chips.com>
2022-06-09 14:27:30 +08:00
3151d01d85
修改USART2_RX_PIN
2022-06-09 07:05:23 +08:00
a738849257
添加HC32F460系列CAN设备驱动支持
2022-06-09 07:05:23 +08:00
c9878aacd2
[scons][iar] 将IAR的PLATFORM字段由iar调整为iccarm
...
将路径更新为IAR最新版本的路径
2022-06-09 07:01:59 +08:00
83b3aadaa3
[Scons][iar][iccarm] IAR统一使用iccarm作为判断条件而不是是用IDE的名字来进行判断
...
因为不确定后续IAR是否会像Keil一样内含有不同的编译工具链
此外，将判断条件改为列表方式，这样更方便后续增加其他可能的IAR编译链
2022-06-09 07:01:59 +08:00
50f041f5c2
[Scons] 将GCC判断条件改为列表方式，方便后续增加新的编译工具链
2022-06-09 07:01:59 +08:00
e622ef3aec
添加USART1/2/3的管脚配置操作 ( #6039 )
2022-06-08 23:29:32 +08:00
4fa1beb812
[bsp][100ask]: create two new bsp for 100ask stm32f103 boards and commit them ( #6045 )
...
* 重新pull后上传bsp和action
* remove the file named main.c in cubemx prj and add enter at last in the file named user_key.c
* remove personal project environment file project.uvguix.slhuan in rtt/bsp/stm32/stm32f103_100ask_mini
* remove system_stmf1xx.c in bsp/stm32/stm32f103-100ask_pro/mini
* modify stm32f1xx_it.c code to conform to the specification
Co-authored-by: slhuan <953172510@qq.com>
2022-06-08 23:28:49 +08:00
5b84857889
[bsp][stm32] fix stm32f767-st-nucleo console device name
2022-06-08 14:46:34 +08:00
a9dce72915
[bsp][stm32h750-artpi] Modify the content of flash algorithms in README.md
2022-06-08 14:18:11 +08:00
4b26e44e55
[bsp][stm32h750-artpi] add bootloader.bin, add the description of the bootloader in README.md.( #5923 )
2022-06-08 14:18:11 +08:00
21003c74ea
[bsp][stm32] 增加uart7和uart8的DMA配置
2022-06-08 11:57:23 +08:00
2d62a95339
[bsp][essemi] update es32f36xx libraries.
2022-06-06 09:57:58 +08:00
093793dfe2
HC32 configuration file revise ( #6015 )
...
* fixed some configuration errors.
2022-06-06 09:56:05 +08:00
b197b503c6
[stm32] move CMSIS hearder files to common folder ( #5998 )
...
* [stm32] move CMSIS hearder files to common folder
* add CMSIS new sconscript
2022-06-04 17:05:37 +08:00
433f0c7721
[bsp/ESP32_C3] Add the gpio driver and readme.md ( #6027 )
2022-06-04 17:04:19 +08:00
fb3f835089
[libc] remove strdup from rtthread.h ( #6026 )
...
add __STDC_LIMIT_MACROS macro in Keil
add RT_USING_LIBC in simulator
add _DLIB_ADD_EXTRA_SYMBOLS=0 in IAR
2022-06-04 17:02:35 +08:00
02b176f8cb
[arduino] add comment ( #6016 )
2022-06-04 13:20:30 +08:00
1fb3f1fcec
[bsp/nuvoton] Update. ( #6022 )
...
1. Sync 4.1.1+.
2. Add SDIO drivers for M480/M2354 platforms.
3. Update LVGL porting.
4. Add N9H30 FMI NAND driver.
Co-authored-by: Wayne Lin <wclin@nuvoton.com>
2022-06-03 10:01:15 +08:00
59d3156611
[bsp/qemu-vexpress-a9] add remount operation to avoid dfs_mout fail ( #6018 )
2022-06-02 06:58:28 +08:00
1d6347796d
Hc32 pr ( #6003 )
...
* HC32F460 supported
Co-authored-by: JamieTx <yangjp24@126.com>
Co-authored-by: Jamie <48308473+JamieTx@users.noreply.github.com>
2022-05-31 11:53:56 +08:00
2f9f39764d
[add] winsock implement on windows simulator. ( #6010 )
...
* [add] winsock implement on windows simulator.
2022-05-31 11:50:17 +08:00
e8d775f888
[componnets][pin]add pin operate command in MSH ( #5892 )
...
* 1. 在AT32的BSP的drv_gpio中增加了at32_pin_get函数，用于实现rt_pin_ops对象中的pin_get
2. 在MSH中增加了PIN的操作命令
3. 为了方便在MSH命令中解析字符串，增加了一些字符串相关的函数
2022-05-30 18:00:26 +08:00
04a17d469a
[device][adc] implement adc_get_vref ( #5988 )
...
* add adc_get_vref
add stm32_adc_get_vref
2022-05-29 10:22:33 +08:00
9d5302d7fb
[STM32][RTC] add support for STM32L0 series. ( #5994 )
...
* [STM32][RTC] add support for STM32L0 series.
* Update drv_rtc.c
2022-05-28 10:02:01 +08:00
532180dc19
Fix bug when restarting and getting interrupts that are not processed. ( #5997 )
...
Reason: Interrupts were not cleaned up during initialization
2022-05-28 10:01:42 +08:00
9ebe0f3b47
[bsp] rename qemu-riscv-virt64 to qemu-virt64-riscv
2022-05-25 10:05:23 +08:00
996add96d6
[stm32][dac] add comment
2022-05-25 10:04:33 +08:00
4ac54cfd60
[arduino] suuport MsTimer2 library
2022-05-25 10:03:54 +08:00
3d4bb43aec
[arduino][readme] 增加对5v容忍的描述
2022-05-25 10:03:54 +08:00
b0364da7e3
[arduino] add F_CPU to indicate the frequency of CPU
2022-05-25 10:03:54 +08:00
36f142fbc3
[arduino] add RTDUINO_NO_SETUP_LOOP
2022-05-25 10:03:54 +08:00
1c64c9ef08
[bsp/renesas/docs/] Add English documents ( #5985 )
...
* [bsp/renesas/docs/] Add English documents
2022-05-25 10:02:42 +08:00
1506829b85
[lvgl] remove LV_DISP_DEF_REFR_PERIOD which are defined manually ( #5976 )
2022-05-23 01:41:23 +08:00
2fc7fab80a
remove CMSIS/RTOS folders
2022-05-20 10:51:55 +08:00
4557d3c8c3
update
2022-05-20 10:51:55 +08:00
19672b7c3a
update stm32 ci checking list
2022-05-20 10:51:55 +08:00
9182d4cbb7
[stm32] remove meaningless files
2022-05-20 10:51:55 +08:00
d466bd0540
[bsp/at32] 1、调整文件结构，合并各系列独立的rt-drivers，以便维护。 2、更新各系列library和工程相关内容
2022-05-19 15:00:03 +08:00
53be4393aa
add rt1170/rt1020 bsp ( #5927 )
...
* add rt1170 bsp
* add rt1020 bsp
2022-05-19 14:06:35 +08:00
880fc2f59a
[imxrt 1060] support touchpad
...
Signed-off-by: Ting Liu <ting.liu@nxp.com>
2022-05-19 14:03:20 +08:00
08737c2a26
[simulator] 消除windows下的警告
2022-05-19 09:43:20 +08:00
569facb12d
[simulator] 增加RTC配置项（默认开启）
2022-05-19 09:43:20 +08:00
e43548f46f
[simulator] 优化SD挂载，在首次挂载失败后格式化重新尝试
2022-05-19 09:43:20 +08:00
7d657cbf46
[simulator] enable BSD socket by default
2022-05-19 09:43:20 +08:00
5ee36367da
[simulator] improve Kconfig structure
...
add Onboard Peripheral Drivers menu
2022-05-19 09:43:20 +08:00
e9a5d41351
[bsp] chmod u+x shell script
2022-05-17 11:16:33 +08:00
020e1bd7da
Add quick start guide for QEMU on macOS
2022-05-17 10:56:38 +08:00
7fc707d99c
[sal][kconfig] 重新梳理sal的依赖关系
2022-05-16 10:02:22 +08:00
b793b6427a
[sal] add draft for docking winsock
2022-05-16 10:02:22 +08:00
19abf927d2
[simulator] avoid conflicts between winsock.h and sys/time.h
2022-05-16 10:02:22 +08:00
2d41853124
[stm32f746] update the project
...
取消了默认选中LWIP和DFS
2022-05-16 09:53:25 +08:00
db27095da6
Unified management interrupt vector table. ( #5925 )
...
* Unified management interrupt vector table.
2022-05-15 20:57:35 +08:00
e848031c93
删除多余文件
2022-05-13 15:39:07 +08:00
63f8811c89
优化 LVGL文件结构
2022-05-13 15:39:07 +08:00
8579f19ceb
[bsp/at32] add at32f413 and at32f415 series
2022-05-13 15:38:43 +08:00
ea6999a700
[imxrt 1060]: support keil armclang compiler
...
Test with Keil MDK 5.36, Compiler V6.16
Signed-off-by: Ting Liu <ting.liu@nxp.com>
2022-05-13 15:37:57 +08:00
a0bfbe8d90
[imxrt1060]support NXP GUiGuider
2022-05-13 14:12:15 +08:00
3344e38dd5
[imaxrt 1060] 优化LVGL文件结构
2022-05-12 10:10:11 +08:00
6fe83d4a77
[lvgl][stm32f407] 优化LVGL初始化流程
2022-05-12 10:10:11 +08:00
1b4f16f729
[stm32f469][lvgl] 优化LVGL文件结构
2022-05-11 20:30:50 +08:00
e6466d0fb7
[qemu] 优化qemu模拟器的LVGL文件结构
2022-05-11 20:30:38 +08:00
4448869394
[simulator] 优化vs模拟器的LVGL结构
2022-05-11 20:30:38 +08:00
9ff61b4cb3
[l475] remove meaningless header file
2022-05-11 20:30:38 +08:00
4e7823cb6b
[stm32l475]优化LVGL初始化流程和结构 ( #5919 )
...
* [lvgl] 代码精炼
* delet lv_port_indev.c
* Update Kconfig
2022-05-11 08:41:57 +08:00
8a7b9da76d
[stm32 nucleo][f072][f401] support TIM7/TIM11 hardware timer
2022-05-10 13:55:16 +08:00
b9902b2fac
添加RTC设备驱动 ( #5914 )
...
* 添加RTC设备驱动
2022-05-10 13:54:15 +08:00
c14dbe8a2e
[lvgl] beautify code
2022-05-10 10:12:45 +08:00
0d2b96d7cc
[stm32][l4] add tim7 support | 设备框架以及驱动错误码处理逻辑存在问题 ( #5901 )
2022-05-09 22:59:27 +08:00
96dd783f37
[cmsis] avoid conflict between cmsis5 and bsp cmsis
2022-05-09 22:54:36 +08:00
4171fcbb06
[bsp][stm32][drv_crypto] Enable RNG Clock
2022-05-09 11:13:01 +08:00
73236a825c
[stm32][spi] remove hardware NSS
2022-05-09 09:57:22 +08:00
e037b7684e
prepare to support squareline studio
2022-05-09 09:56:27 +08:00
907ee070dd
[imxrt1060] exchange On-chip Peripheral Drivers and Onboard Peripheral Drivers menu in Kconfig
2022-05-09 09:56:27 +08:00
6495df717f
[gd32/libraries]: fix compile error in rtc: "pmu_backup_write_enable" was not found. ( #5906 )
2022-05-09 09:37:51 +08:00
df3d16294c
Delete the bsp of hc32f4a0. ( #5907 )
...
* delete the bsp of hc32f4a0.
2022-05-09 09:32:30 +08:00
28b551bfe3
Add the BSP of HC32 series. ( #5905 )
...
* Add the BSP of HC32 series.
2022-05-06 09:28:21 +08:00
0e66f3f833
[arduino] update ( #5895 )
2022-05-01 12:24:35 +08:00
ee1e0a0df0
[bsp][esp][esp32c3] add the bsp of esp32c3 ( #5869 )
...
* add the ESP32_C3 first version
* add the blinky ok version
* fix the code
* format file
* add the readme
* fix the formate
* Update README.md
* Update main.c
* fix the readme
* fix rtconfig.h
* remove cpp config
2022-04-29 09:01:44 +08:00
ec9629b5f0
更新文档 潘多拉增加spi2
2022-04-28 09:19:39 +08:00
429e1cafe6
修复BUG：串口启用DMA接收后，动态修改串口波特率扰乱接收检索
...
在串口不关闭的情况下，更改波特率后，清空上次数据检索，导致更新写入检索错误，
串口无法读出正确的数据。真实数据的位置和检索值之间总有一定的距离，导致读取
数据的时候会有一定的延时。缓冲区大，延时越长
2022-04-27 21:59:06 +08:00
326abec0e7
修复BUG：SDIO和UART6（TX）的DMA通道分配冲突
2022-04-27 21:54:28 +08:00
7215a27038
[nuvoton] Update nuc980iot configuration ( #5882 )
...
* Disable TRNG function in default configuration.
Co-authored-by: Wayne Lin <wclin@nuvoton.com>
2022-04-27 21:53:50 +08:00
55c9827096
添加对Microchip SAML10系列支持 ( #5868 )
...
* Add SAML10 Cortex-M23 series support
1. Add SAML10 Cortex-M23 series support; 2. remove STDIO related code of same54 series, no need any more; 3. update rtconfig.py to support output bin & map file containing DEVICE PART info.
2022-04-27 09:24:56 +08:00
d52ad69d6f
[BSP] judge the SPI instances before operating ( #5874 )
2022-04-26 13:26:28 +08:00
7c99148f78
[bsp/renesas] update docs/RA系列BSP制作教程.md ( #5862 )
...
* [update] 添加 RA 系列 BSP 开发教程：
- 添加 RA 系列 BSP 开发教程
- 添加 ra6m4-iot PPP 上网
- 整理 驱动文件
* [bsp/renesas] update docs/RA系列BSP制作教程.md
* [restore] Restore to the latest version
2022-04-24 14:53:03 +08:00
d77125452b
为n32g45x添加硬件CRC支持 ( #5852 )
...
* 为n32g45x添加硬件CRC支持
基于stm32的驱动文件进行改造，目前modbus的crc16和mpeg2的crc32测试正常
2022-04-24 11:42:25 +08:00
6ce4a87492
[fcntl] create new fcntl.h file for vs ( #5860 )
...
* [fcntl] create new fcntl.h file for vs
2022-04-24 10:52:57 +08:00
7af43fdd4f
[bsp/at32] update at32f435_437 adc driver
2022-04-24 09:28:37 +08:00
717c678190
fixed some warning ( #5866 )
2022-04-24 01:24:20 +08:00
175ca2ee09
[dac] add get resolution method
2022-04-23 23:03:59 +08:00
acc04facf9
[gd32] format code ( #5861 )
2022-04-22 22:30:15 +08:00
c2a0995545
[adc] 支持adc框架获取BSP的ADC分辨率 ( #5853 )
2022-04-22 22:26:41 +08:00
b06228ec7e
[bsp/gd32] bug fixed gpio_mode_set miss gd32_spi->mosi_pin,gd32_spi->sck_pin ( #5729 )
...
* bug fixed gpio_mode_set miss gd32_spi->mosi_pin,gd32_spi->sck_pin
* feature,add gd32_spi's alt_func_num member for different spi periph's gpio
* feature,add spi3,spi4,and support multi spi devices
* feature,add rt_hw_spi_device_attach api
* tested on the gd32f450i-eval board
2022-04-22 14:40:45 +08:00
04fe6232fb
[bsp] add null CCFLAGS for Nuclei bsps ( #5851 )
...
* [bsp] fix gd32vf103_rvstar building issue
2022-04-21 20:37:39 +08:00
77900ab420
[update] Updated the Cortex-A of linker scripts for the new version of GCC（4.7）。
2022-04-20 17:32:02 +08:00
cbd062ca25
[bsp/n32g45x] drv_spi.c中添加超时检测避免卡死 ( #5820 )
...
* 为spi添加超时检测,避免卡死。提取公共部份，避免代码复制。
2022-04-20 10:28:29 +08:00
a0f8d43744
[gcc][armcc][armclang] rtconfig.CROSS_TOOL->rtconfig.PLATFORM ( #5802 )
...
* [gcc][armcc][armclang] rtconfig.CROSS_TOOL->rtconfig.PLATFORM
2022-04-20 09:56:04 +08:00
7b47e8d052
[stm32f401-nucleo] arduino support ( #5842 )
...
* [stm32f401-nucleo] arduino support
* 增加application arduino main文件
* 调整目录结构
2022-04-20 09:09:58 +08:00
7847c5e98d
Microchip SAM MCU新增ethernet支持和驱动更新 ( #5821 )
...
* Microchip SAM MCU BSP update and add ethernet driver
1. Update Microchip SAM MCU BSP, add I2C, GMAC, ADC driver support. 2. Add ethernet driver support of SAM MCU for RT-Thread.
* Add GMAC and I2C driver support
1. Update MCU BSP to support I2C/ADC/GMAC peripherals. 2. Add I2C and ethernet driver and LWIP support. 3. Update serial driver.
* Add I2C driver and move some files to the common folder
1. Add I2C driver. 2. Move the same drivers and demo code to same folder to reduce duplicated code.
2022-04-19 14:32:02 +08:00
991b6e78b3
[bug] 修正rtc对时间参数范围的处理 | fix a bug of rtc
2022-04-19 11:48:59 +08:00
a003cbe705
rt1052 添加 RT-Thread Studio 工程 ( #5838 )
...
* rt1052 添加 RT-Thread Studio 工程
2022-04-19 11:04:44 +08:00
e1f7e95f5d
remove unused files
2022-04-18 10:07:15 +08:00
ebcc2cb8c1
update for file format
2022-04-18 10:07:15 +08:00
0449ade73b
add at32f435_437 first version
2022-04-18 10:07:15 +08:00
c2b8df673b
update for drivers and readme
2022-04-18 10:07:15 +08:00
0dc493d6da
[stm32f072] support Arduino I2C and update readme ( #5824 )
...
[stm32f072] support Arduino I2C and update readme
2022-04-18 09:36:12 +08:00
9fa8c78c9a
update arduino related ( #5809 )
...
- add comments
- remove ARDUINO_PWM_HZ
- remove initVariant blank function
- support DAC0
- improve Kconfig of STM32L475 PANDORA
- add readme
- add i2c1 bus device
2022-04-16 15:10:00 +08:00
35fced1235
Disable TRNG function in default configuration.
2022-04-15 15:05:33 +08:00
5e7badd34c
[bsp/stm32] update ov5640 configuration of openmv
2022-04-15 10:34:38 +08:00
da0164cf8e
[bsp/stm32] add ov5640、dcmi、i2c for openmv
2022-04-15 10:34:38 +08:00
7919642a8b
[bsp/stm32] add rtc for openmv
2022-04-15 10:34:38 +08:00
54642ec639
Merge pull request #5807 from rtthread-bot/rtt_bot
...
[update] RT-Thread Robot automatic submission
2022-04-14 16:33:44 +08:00
ecb69f56ac
Update drv_can.c
...
删除多余注释，另外确定了对于其他型号单片机的适应性
2022-04-14 11:50:22 +08:00
ff36a39d32
[bsp/stm32] fix the bug of can filter conflict
2022-04-14 11:50:22 +08:00
8af8decb62
Add Microchip SAM series MCU support for RT-Thread ( #5771 )
...
* Add Microchip SAM series MCU support for RT-Thread
Add Microchip SAM series MCU support for RT-Thread, including SAM Cortex-M0+, M4F and M7.
* Add bsp directory to ignored check list
Add bsp directory to ignored check list, add microchip /samc21/same54/same70 to workflows list
* remove STDIO definition and bug fix
1. remove STDIO code from Microchip official BSP. 2. bug fix of SAME70 hpl/hpl_usart.c, samc21&same54 hpl/hpl_sercom.c baudrate update interface. 3. Add RT-Thread standard STDIO implementation on Microchip SAM MCU.
* add CAN driver & example and script fix
Add CAN driver and example for SAMC21/SAME5x/SAME70 and fix rtconfig.py issue(unused space might result link error)
* Add Chinese version README
Add Chinese version README for SAMC21/E54/E70
2022-04-14 10:54:53 +08:00
435d2b24f8
Merge remote-tracking branch 'rtt_gitee/gitee_master'
2022-04-13 16:16:47 +00:00
efdd28bde6
remove meaningless debug file
2022-04-13 22:37:59 +08:00
3cacdf6ddb
[simulator] upgrade SDL2.0 to 2.0.20
2022-04-13 22:37:59 +08:00
fdb486de7b
[Update] n32_msp.c add spi3 ( #5733 )
...
* Update n32_msp.c
* 添加SPI3的初始化代码
* 修正spi收发函数卡死在SPI_I2S_GetStatus的BUG
2022-04-13 16:19:21 +08:00
BruceOu
陈迎春
Meco Man
solar_li
xinyigao
levizhxl
ueJone
GUI
梁生
woody
xiaoxiaolisunny
cmbjxxiao
breederbai
100ask-Alen
rewine
Wayne
supperthomas
xiaoxiaolisunny
Steven-LiuSF
luhuadong
Yanlineng
liuhy
xiangxistu
xfwangqiang
Stanley Lwin
cha331
Freey0
Sherman
sheltonyu
Ting Liu
tangzz98
Jamie
Rbb666
Wu Han
charlown
Kevin Liu
blta
wolfJane
xfwangqiang
Forest-Rain
zhouji
Rbb666
Wayne Lin
Miaowulue
guo
zuozuojia
zuozuojia
rtthread-bot